| /* | |
| * | |
| * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400 | |
| * | |
| * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz> | |
| * | |
| * Portions Copyright (c) 2001 Matrox Graphics Inc. | |
| * | |
| * Version: 1.65 2002/08/14 | |
| * | |
| * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org> | |
| * | |
| * Contributors: "menion?" <menion@mindless.com> | |
| * Betatesting, fixes, ideas | |
| * | |
| * "Kurt Garloff" <garloff@suse.de> | |
| * Betatesting, fixes, ideas, videomodes, videomodes timmings | |
| * | |
| * "Tom Rini" <trini@kernel.crashing.org> | |
| * MTRR stuff, PPC cleanups, betatesting, fixes, ideas | |
| * | |
| * "Bibek Sahu" <scorpio@dodds.net> | |
| * Access device through readb|w|l and write b|w|l | |
| * Extensive debugging stuff | |
| * | |
| * "Daniel Haun" <haund@usa.net> | |
| * Testing, hardware cursor fixes | |
| * | |
| * "Scott Wood" <sawst46+@pitt.edu> | |
| * Fixes | |
| * | |
| * "Gerd Knorr" <kraxel@goldbach.isdn.cs.tu-berlin.de> | |
| * Betatesting | |
| * | |
| * "Kelly French" <targon@hazmat.com> | |
| * "Fernando Herrera" <fherrera@eurielec.etsit.upm.es> | |
| * Betatesting, bug reporting | |
| * | |
| * "Pablo Bianucci" <pbian@pccp.com.ar> | |
| * Fixes, ideas, betatesting | |
| * | |
| * "Inaky Perez Gonzalez" <inaky@peloncho.fis.ucm.es> | |
| * Fixes, enhandcements, ideas, betatesting | |
| * | |
| * "Ryuichi Oikawa" <roikawa@rr.iiij4u.or.jp> | |
| * PPC betatesting, PPC support, backward compatibility | |
| * | |
| * "Paul Womar" <Paul@pwomar.demon.co.uk> | |
| * "Owen Waller" <O.Waller@ee.qub.ac.uk> | |
| * PPC betatesting | |
| * | |
| * "Thomas Pornin" <pornin@bolet.ens.fr> | |
| * Alpha betatesting | |
| * | |
| * "Pieter van Leuven" <pvl@iae.nl> | |
| * "Ulf Jaenicke-Roessler" <ujr@physik.phy.tu-dresden.de> | |
| * G100 testing | |
| * | |
| * "H. Peter Arvin" <hpa@transmeta.com> | |
| * Ideas | |
| * | |
| * "Cort Dougan" <cort@cs.nmt.edu> | |
| * CHRP fixes and PReP cleanup | |
| * | |
| * "Mark Vojkovich" <mvojkovi@ucsd.edu> | |
| * G400 support | |
| * | |
| * "Samuel Hocevar" <sam@via.ecp.fr> | |
| * Fixes | |
| * | |
| * "Anton Altaparmakov" <AntonA@bigfoot.com> | |
| * G400 MAX/non-MAX distinction | |
| * | |
| * "Ken Aaker" <kdaaker@rchland.vnet.ibm.com> | |
| * memtype extension (needed for GXT130P RS/6000 adapter) | |
| * | |
| * "Uns Lider" <unslider@miranda.org> | |
| * G100 PLNWT fixes | |
| * | |
| * "Denis Zaitsev" <zzz@cd-club.ru> | |
| * Fixes | |
| * | |
| * "Mike Pieper" <mike@pieper-family.de> | |
| * TVOut enhandcements, V4L2 control interface. | |
| * | |
| * "Diego Biurrun" <diego@biurrun.de> | |
| * DFP testing | |
| * | |
| * (following author is not in any relation with this code, but his code | |
| * is included in this driver) | |
| * | |
| * Based on framebuffer driver for VBE 2.0 compliant graphic boards | |
| * (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de> | |
| * | |
| * (following author is not in any relation with this code, but his ideas | |
| * were used when writing this driver) | |
| * | |
| * FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk> | |
| * | |
| */ | |
| #include <linux/version.h> | |
| #include "matroxfb_base.h" | |
| #include "matroxfb_misc.h" | |
| #include "matroxfb_accel.h" | |
| #include "matroxfb_DAC1064.h" | |
| #include "matroxfb_Ti3026.h" | |
| #include "matroxfb_maven.h" | |
| #include "matroxfb_crtc2.h" | |
| #include "matroxfb_g450.h" | |
| #include <linux/matroxfb.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/uaccess.h> | |
| #ifdef CONFIG_PPC_PMAC | |
| #include <asm/machdep.h> | |
| unsigned char nvram_read_byte(int); | |
| static int default_vmode = VMODE_NVRAM; | |
| static int default_cmode = CMODE_NVRAM; | |
| #endif | |
| static void matroxfb_unregister_device(struct matrox_fb_info* minfo); | |
| /* --------------------------------------------------------------------- */ | |
| /* | |
| * card parameters | |
| */ | |
| /* --------------------------------------------------------------------- */ | |
| static struct fb_var_screeninfo vesafb_defined = { | |
| 640,480,640,480,/* W,H, W, H (virtual) load xres,xres_virtual*/ | |
| 0,0, /* virtual -> visible no offset */ | |
| 8, /* depth -> load bits_per_pixel */ | |
| 0, /* greyscale ? */ | |
| {0,0,0}, /* R */ | |
| {0,0,0}, /* G */ | |
| {0,0,0}, /* B */ | |
| {0,0,0}, /* transparency */ | |
| 0, /* standard pixel format */ | |
| FB_ACTIVATE_NOW, | |
| -1,-1, | |
| FB_ACCELF_TEXT, /* accel flags */ | |
| 39721L,48L,16L,33L,10L, | |
| 96L,2L,~0, /* No sync info */ | |
| FB_VMODE_NONINTERLACED, | |
| }; | |
| /* --------------------------------------------------------------------- */ | |
| static void update_crtc2(struct matrox_fb_info *minfo, unsigned int pos) | |
| { | |
| struct matroxfb_dh_fb_info *info = minfo->crtc2.info; | |
| /* Make sure that displays are compatible */ | |
| if (info && (info->fbcon.var.bits_per_pixel == minfo->fbcon.var.bits_per_pixel) | |
| && (info->fbcon.var.xres_virtual == minfo->fbcon.var.xres_virtual) | |
| && (info->fbcon.var.green.length == minfo->fbcon.var.green.length) | |
| ) { | |
| switch (minfo->fbcon.var.bits_per_pixel) { | |
| case 16: | |
| case 32: | |
| pos = pos * 8; | |
| if (info->interlaced) { | |
| mga_outl(0x3C2C, pos); | |
| mga_outl(0x3C28, pos + minfo->fbcon.var.xres_virtual * minfo->fbcon.var.bits_per_pixel / 8); | |
| } else { | |
| mga_outl(0x3C28, pos); | |
| } | |
| break; | |
| } | |
| } | |
| } | |
| static void matroxfb_crtc1_panpos(struct matrox_fb_info *minfo) | |
| { | |
| if (minfo->crtc1.panpos >= 0) { | |
| unsigned long flags; | |
| int panpos; | |
| matroxfb_DAC_lock_irqsave(flags); | |
| panpos = minfo->crtc1.panpos; | |
| if (panpos >= 0) { | |
| unsigned int extvga_reg; | |
| minfo->crtc1.panpos = -1; /* No update pending anymore */ | |
| extvga_reg = mga_inb(M_EXTVGA_INDEX); | |
| mga_setr(M_EXTVGA_INDEX, 0x00, panpos); | |
| if (extvga_reg != 0x00) { | |
| mga_outb(M_EXTVGA_INDEX, extvga_reg); | |
| } | |
| } | |
| matroxfb_DAC_unlock_irqrestore(flags); | |
| } | |
| } | |
| static irqreturn_t matrox_irq(int irq, void *dev_id) | |
| { | |
| u_int32_t status; | |
| int handled = 0; | |
| struct matrox_fb_info *minfo = dev_id; | |
| status = mga_inl(M_STATUS); | |
| if (status & 0x20) { | |
| mga_outl(M_ICLEAR, 0x20); | |
| minfo->crtc1.vsync.cnt++; | |
| matroxfb_crtc1_panpos(minfo); | |
| wake_up_interruptible(&minfo->crtc1.vsync.wait); | |
| handled = 1; | |
| } | |
| if (status & 0x200) { | |
| mga_outl(M_ICLEAR, 0x200); | |
| minfo->crtc2.vsync.cnt++; | |
| wake_up_interruptible(&minfo->crtc2.vsync.wait); | |
| handled = 1; | |
| } | |
| return IRQ_RETVAL(handled); | |
| } | |
| int matroxfb_enable_irq(struct matrox_fb_info *minfo, int reenable) | |
| { | |
| u_int32_t bm; | |
| if (minfo->devflags.accelerator == FB_ACCEL_MATROX_MGAG400) | |
| bm = 0x220; | |
| else | |
| bm = 0x020; | |
| if (!test_and_set_bit(0, &minfo->irq_flags)) { | |
| if (request_irq(minfo->pcidev->irq, matrox_irq, | |
| IRQF_SHARED, "matroxfb", minfo)) { | |
| clear_bit(0, &minfo->irq_flags); | |
| return -EINVAL; | |
| } | |
| /* Clear any pending field interrupts */ | |
| mga_outl(M_ICLEAR, bm); | |
| mga_outl(M_IEN, mga_inl(M_IEN) | bm); | |
| } else if (reenable) { | |
| u_int32_t ien; | |
| ien = mga_inl(M_IEN); | |
| if ((ien & bm) != bm) { | |
| printk(KERN_DEBUG "matroxfb: someone disabled IRQ [%08X]\n", ien); | |
| mga_outl(M_IEN, ien | bm); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void matroxfb_disable_irq(struct matrox_fb_info *minfo) | |
| { | |
| if (test_and_clear_bit(0, &minfo->irq_flags)) { | |
| /* Flush pending pan-at-vbl request... */ | |
| matroxfb_crtc1_panpos(minfo); | |
| if (minfo->devflags.accelerator == FB_ACCEL_MATROX_MGAG400) | |
| mga_outl(M_IEN, mga_inl(M_IEN) & ~0x220); | |
| else | |
| mga_outl(M_IEN, mga_inl(M_IEN) & ~0x20); | |
| free_irq(minfo->pcidev->irq, minfo); | |
| } | |
| } | |
| int matroxfb_wait_for_sync(struct matrox_fb_info *minfo, u_int32_t crtc) | |
| { | |
| struct matrox_vsync *vs; | |
| unsigned int cnt; | |
| int ret; | |
| switch (crtc) { | |
| case 0: | |
| vs = &minfo->crtc1.vsync; | |
| break; | |
| case 1: | |
| if (minfo->devflags.accelerator != FB_ACCEL_MATROX_MGAG400) { | |
| return -ENODEV; | |
| } | |
| vs = &minfo->crtc2.vsync; | |
| break; | |
| default: | |
| return -ENODEV; | |
| } | |
| ret = matroxfb_enable_irq(minfo, 0); | |
| if (ret) { | |
| return ret; | |
| } | |
| cnt = vs->cnt; | |
| ret = wait_event_interruptible_timeout(vs->wait, cnt != vs->cnt, HZ/10); | |
| if (ret < 0) { | |
| return ret; | |
| } | |
| if (ret == 0) { | |
| matroxfb_enable_irq(minfo, 1); | |
| return -ETIMEDOUT; | |
| } | |
| return 0; | |
| } | |
| /* --------------------------------------------------------------------- */ | |
| static void matrox_pan_var(struct matrox_fb_info *minfo, | |
| struct fb_var_screeninfo *var) | |
| { | |
| unsigned int pos; | |
| unsigned short p0, p1, p2; | |
| unsigned int p3; | |
| int vbl; | |
| unsigned long flags; | |
| CRITFLAGS | |
| DBG(__func__) | |
| if (minfo->dead) | |
| return; | |
| minfo->fbcon.var.xoffset = var->xoffset; | |
| minfo->fbcon.var.yoffset = var->yoffset; | |
| pos = (minfo->fbcon.var.yoffset * minfo->fbcon.var.xres_virtual + minfo->fbcon.var.xoffset) * minfo->curr.final_bppShift / 32; | |
| pos += minfo->curr.ydstorg.chunks; | |
| p0 = minfo->hw.CRTC[0x0D] = pos & 0xFF; | |
| p1 = minfo->hw.CRTC[0x0C] = (pos & 0xFF00) >> 8; | |
| p2 = minfo->hw.CRTCEXT[0] = (minfo->hw.CRTCEXT[0] & 0xB0) | ((pos >> 16) & 0x0F) | ((pos >> 14) & 0x40); | |
| p3 = minfo->hw.CRTCEXT[8] = pos >> 21; | |
| /* FB_ACTIVATE_VBL and we can acquire interrupts? Honor FB_ACTIVATE_VBL then... */ | |
| vbl = (var->activate & FB_ACTIVATE_VBL) && (matroxfb_enable_irq(minfo, 0) == 0); | |
| CRITBEGIN | |
| matroxfb_DAC_lock_irqsave(flags); | |
| mga_setr(M_CRTC_INDEX, 0x0D, p0); | |
| mga_setr(M_CRTC_INDEX, 0x0C, p1); | |
| if (minfo->devflags.support32MB) | |
| mga_setr(M_EXTVGA_INDEX, 0x08, p3); | |
| if (vbl) { | |
| minfo->crtc1.panpos = p2; | |
| } else { | |
| /* Abort any pending change */ | |
| minfo->crtc1.panpos = -1; | |
| mga_setr(M_EXTVGA_INDEX, 0x00, p2); | |
| } | |
| matroxfb_DAC_unlock_irqrestore(flags); | |
| update_crtc2(minfo, pos); | |
| CRITEND | |
| } | |
| static void matroxfb_remove(struct matrox_fb_info *minfo, int dummy) | |
| { | |
| /* Currently we are holding big kernel lock on all dead & usecount updates. | |
| * Destroy everything after all users release it. Especially do not unregister | |
| * framebuffer and iounmap memory, neither fbmem nor fbcon-cfb* does not check | |
| * for device unplugged when in use. | |
| * In future we should point mmio.vbase & video.vbase somewhere where we can | |
| * write data without causing too much damage... | |
| */ | |
| minfo->dead = 1; | |
| if (minfo->usecount) { | |
| /* destroy it later */ | |
| return; | |
| } | |
| matroxfb_unregister_device(minfo); | |
| unregister_framebuffer(&minfo->fbcon); | |
| matroxfb_g450_shutdown(minfo); | |
| #ifdef CONFIG_MTRR | |
| if (minfo->mtrr.vram_valid) | |
| mtrr_del(minfo->mtrr.vram, minfo->video.base, minfo->video.len); | |
| #endif | |
| mga_iounmap(minfo->mmio.vbase); | |
| mga_iounmap(minfo->video.vbase); | |
| release_mem_region(minfo->video.base, minfo->video.len_maximum); | |
| release_mem_region(minfo->mmio.base, 16384); | |
| kfree(minfo); | |
| } | |
| /* | |
| * Open/Release the frame buffer device | |
| */ | |
| static int matroxfb_open(struct fb_info *info, int user) | |
| { | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| DBG_LOOP(__func__) | |
| if (minfo->dead) { | |
| return -ENXIO; | |
| } | |
| minfo->usecount++; | |
| if (user) { | |
| minfo->userusecount++; | |
| } | |
| return(0); | |
| } | |
| static int matroxfb_release(struct fb_info *info, int user) | |
| { | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| DBG_LOOP(__func__) | |
| if (user) { | |
| if (0 == --minfo->userusecount) { | |
| matroxfb_disable_irq(minfo); | |
| } | |
| } | |
| if (!(--minfo->usecount) && minfo->dead) { | |
| matroxfb_remove(minfo, 0); | |
| } | |
| return(0); | |
| } | |
| static int matroxfb_pan_display(struct fb_var_screeninfo *var, | |
| struct fb_info* info) { | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| DBG(__func__) | |
| matrox_pan_var(minfo, var); | |
| return 0; | |
| } | |
| static int matroxfb_get_final_bppShift(const struct matrox_fb_info *minfo, | |
| int bpp) | |
| { | |
| int bppshft2; | |
| DBG(__func__) | |
| bppshft2 = bpp; | |
| if (!bppshft2) { | |
| return 8; | |
| } | |
| if (isInterleave(minfo)) | |
| bppshft2 >>= 1; | |
| if (minfo->devflags.video64bits) | |
| bppshft2 >>= 1; | |
| return bppshft2; | |
| } | |
| static int matroxfb_test_and_set_rounding(const struct matrox_fb_info *minfo, | |
| int xres, int bpp) | |
| { | |
| int over; | |
| int rounding; | |
| DBG(__func__) | |
| switch (bpp) { | |
| case 0: return xres; | |
| case 4: rounding = 128; | |
| break; | |
| case 8: rounding = 64; /* doc says 64; 32 is OK for G400 */ | |
| break; | |
| case 16: rounding = 32; | |
| break; | |
| case 24: rounding = 64; /* doc says 64; 32 is OK for G400 */ | |
| break; | |
| default: rounding = 16; | |
| /* on G400, 16 really does not work */ | |
| if (minfo->devflags.accelerator == FB_ACCEL_MATROX_MGAG400) | |
| rounding = 32; | |
| break; | |
| } | |
| if (isInterleave(minfo)) { | |
| rounding *= 2; | |
| } | |
| over = xres % rounding; | |
| if (over) | |
| xres += rounding-over; | |
| return xres; | |
| } | |
| static int matroxfb_pitch_adjust(const struct matrox_fb_info *minfo, int xres, | |
| int bpp) | |
| { | |
| const int* width; | |
| int xres_new; | |
| DBG(__func__) | |
| if (!bpp) return xres; | |
| width = minfo->capable.vxres; | |
| if (minfo->devflags.precise_width) { | |
| while (*width) { | |
| if ((*width >= xres) && (matroxfb_test_and_set_rounding(minfo, *width, bpp) == *width)) { | |
| break; | |
| } | |
| width++; | |
| } | |
| xres_new = *width; | |
| } else { | |
| xres_new = matroxfb_test_and_set_rounding(minfo, xres, bpp); | |
| } | |
| return xres_new; | |
| } | |
| static int matroxfb_get_cmap_len(struct fb_var_screeninfo *var) { | |
| DBG(__func__) | |
| switch (var->bits_per_pixel) { | |
| case 4: | |
| return 16; /* pseudocolor... 16 entries HW palette */ | |
| case 8: | |
| return 256; /* pseudocolor... 256 entries HW palette */ | |
| case 16: | |
| return 16; /* directcolor... 16 entries SW palette */ | |
| /* Mystique: truecolor, 16 entries SW palette, HW palette hardwired into 1:1 mapping */ | |
| case 24: | |
| return 16; /* directcolor... 16 entries SW palette */ | |
| /* Mystique: truecolor, 16 entries SW palette, HW palette hardwired into 1:1 mapping */ | |
| case 32: | |
| return 16; /* directcolor... 16 entries SW palette */ | |
| /* Mystique: truecolor, 16 entries SW palette, HW palette hardwired into 1:1 mapping */ | |
| } | |
| return 16; /* return something reasonable... or panic()? */ | |
| } | |
| static int matroxfb_decode_var(const struct matrox_fb_info *minfo, | |
| struct fb_var_screeninfo *var, int *visual, | |
| int *video_cmap_len, unsigned int* ydstorg) | |
| { | |
| struct RGBT { | |
| unsigned char bpp; | |
| struct { | |
| unsigned char offset, | |
| length; | |
| } red, | |
| green, | |
| blue, | |
| transp; | |
| signed char visual; | |
| }; | |
| static const struct RGBT table[]= { | |
| { 8,{ 0,8},{0,8},{0,8},{ 0,0},MX_VISUAL_PSEUDOCOLOR}, | |
| {15,{10,5},{5,5},{0,5},{15,1},MX_VISUAL_DIRECTCOLOR}, | |
| {16,{11,5},{5,6},{0,5},{ 0,0},MX_VISUAL_DIRECTCOLOR}, | |
| {24,{16,8},{8,8},{0,8},{ 0,0},MX_VISUAL_DIRECTCOLOR}, | |
| {32,{16,8},{8,8},{0,8},{24,8},MX_VISUAL_DIRECTCOLOR} | |
| }; | |
| struct RGBT const *rgbt; | |
| unsigned int bpp = var->bits_per_pixel; | |
| unsigned int vramlen; | |
| unsigned int memlen; | |
| DBG(__func__) | |
| switch (bpp) { | |
| case 4: if (!minfo->capable.cfb4) return -EINVAL; | |
| break; | |
| case 8: break; | |
| case 16: break; | |
| case 24: break; | |
| case 32: break; | |
| default: return -EINVAL; | |
| } | |
| *ydstorg = 0; | |
| vramlen = minfo->video.len_usable; | |
| if (var->yres_virtual < var->yres) | |
| var->yres_virtual = var->yres; | |
| if (var->xres_virtual < var->xres) | |
| var->xres_virtual = var->xres; | |
| var->xres_virtual = matroxfb_pitch_adjust(minfo, var->xres_virtual, bpp); | |
| memlen = var->xres_virtual * bpp * var->yres_virtual / 8; | |
| if (memlen > vramlen) { | |
| var->yres_virtual = vramlen * 8 / (var->xres_virtual * bpp); | |
| memlen = var->xres_virtual * bpp * var->yres_virtual / 8; | |
| } | |
| /* There is hardware bug that no line can cross 4MB boundary */ | |
| /* give up for CFB24, it is impossible to easy workaround it */ | |
| /* for other try to do something */ | |
| if (!minfo->capable.cross4MB && (memlen > 0x400000)) { | |
| if (bpp == 24) { | |
| /* sorry */ | |
| } else { | |
| unsigned int linelen; | |
| unsigned int m1 = linelen = var->xres_virtual * bpp / 8; | |
| unsigned int m2 = PAGE_SIZE; /* or 128 if you do not need PAGE ALIGNED address */ | |
| unsigned int max_yres; | |
| while (m1) { | |
| int t; | |
| while (m2 >= m1) m2 -= m1; | |
| t = m1; | |
| m1 = m2; | |
| m2 = t; | |
| } | |
| m2 = linelen * PAGE_SIZE / m2; | |
| *ydstorg = m2 = 0x400000 % m2; | |
| max_yres = (vramlen - m2) / linelen; | |
| if (var->yres_virtual > max_yres) | |
| var->yres_virtual = max_yres; | |
| } | |
| } | |
| /* YDSTLEN contains only signed 16bit value */ | |
| if (var->yres_virtual > 32767) | |
| var->yres_virtual = 32767; | |
| /* we must round yres/xres down, we already rounded y/xres_virtual up | |
| if it was possible. We should return -EINVAL, but I disagree */ | |
| if (var->yres_virtual < var->yres) | |
| var->yres = var->yres_virtual; | |
| if (var->xres_virtual < var->xres) | |
| var->xres = var->xres_virtual; | |
| if (var->xoffset + var->xres > var->xres_virtual) | |
| var->xoffset = var->xres_virtual - var->xres; | |
| if (var->yoffset + var->yres > var->yres_virtual) | |
| var->yoffset = var->yres_virtual - var->yres; | |
| if (bpp == 16 && var->green.length == 5) { | |
| bpp--; /* an artificial value - 15 */ | |
| } | |
| for (rgbt = table; rgbt->bpp < bpp; rgbt++); | |
| #define SETCLR(clr)\ | |
| var->clr.offset = rgbt->clr.offset;\ | |
| var->clr.length = rgbt->clr.length | |
| SETCLR(red); | |
| SETCLR(green); | |
| SETCLR(blue); | |
| SETCLR(transp); | |
| #undef SETCLR | |
| *visual = rgbt->visual; | |
| if (bpp > 8) | |
| dprintk("matroxfb: truecolor: " | |
| "size=%d:%d:%d:%d, shift=%d:%d:%d:%d\n", | |
| var->transp.length, var->red.length, var->green.length, var->blue.length, | |
| var->transp.offset, var->red.offset, var->green.offset, var->blue.offset); | |
| *video_cmap_len = matroxfb_get_cmap_len(var); | |
| dprintk(KERN_INFO "requested %d*%d/%dbpp (%d*%d)\n", var->xres, var->yres, var->bits_per_pixel, | |
| var->xres_virtual, var->yres_virtual); | |
| return 0; | |
| } | |
| static int matroxfb_setcolreg(unsigned regno, unsigned red, unsigned green, | |
| unsigned blue, unsigned transp, | |
| struct fb_info *fb_info) | |
| { | |
| struct matrox_fb_info* minfo = container_of(fb_info, struct matrox_fb_info, fbcon); | |
| DBG(__func__) | |
| /* | |
| * Set a single color register. The values supplied are | |
| * already rounded down to the hardware's capabilities | |
| * (according to the entries in the `var' structure). Return | |
| * != 0 for invalid regno. | |
| */ | |
| if (regno >= minfo->curr.cmap_len) | |
| return 1; | |
| if (minfo->fbcon.var.grayscale) { | |
| /* gray = 0.30*R + 0.59*G + 0.11*B */ | |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; | |
| } | |
| red = CNVT_TOHW(red, minfo->fbcon.var.red.length); | |
| green = CNVT_TOHW(green, minfo->fbcon.var.green.length); | |
| blue = CNVT_TOHW(blue, minfo->fbcon.var.blue.length); | |
| transp = CNVT_TOHW(transp, minfo->fbcon.var.transp.length); | |
| switch (minfo->fbcon.var.bits_per_pixel) { | |
| case 4: | |
| case 8: | |
| mga_outb(M_DAC_REG, regno); | |
| mga_outb(M_DAC_VAL, red); | |
| mga_outb(M_DAC_VAL, green); | |
| mga_outb(M_DAC_VAL, blue); | |
| break; | |
| case 16: | |
| if (regno >= 16) | |
| break; | |
| { | |
| u_int16_t col = | |
| (red << minfo->fbcon.var.red.offset) | | |
| (green << minfo->fbcon.var.green.offset) | | |
| (blue << minfo->fbcon.var.blue.offset) | | |
| (transp << minfo->fbcon.var.transp.offset); /* for 1:5:5:5 */ | |
| minfo->cmap[regno] = col | (col << 16); | |
| } | |
| break; | |
| case 24: | |
| case 32: | |
| if (regno >= 16) | |
| break; | |
| minfo->cmap[regno] = | |
| (red << minfo->fbcon.var.red.offset) | | |
| (green << minfo->fbcon.var.green.offset) | | |
| (blue << minfo->fbcon.var.blue.offset) | | |
| (transp << minfo->fbcon.var.transp.offset); /* 8:8:8:8 */ | |
| break; | |
| } | |
| return 0; | |
| } | |
| static void matroxfb_init_fix(struct matrox_fb_info *minfo) | |
| { | |
| struct fb_fix_screeninfo *fix = &minfo->fbcon.fix; | |
| DBG(__func__) | |
| strcpy(fix->id,"MATROX"); | |
| fix->xpanstep = 8; /* 8 for 8bpp, 4 for 16bpp, 2 for 32bpp */ | |
| fix->ypanstep = 1; | |
| fix->ywrapstep = 0; | |
| fix->mmio_start = minfo->mmio.base; | |
| fix->mmio_len = minfo->mmio.len; | |
| fix->accel = minfo->devflags.accelerator; | |
| } | |
| static void matroxfb_update_fix(struct matrox_fb_info *minfo) | |
| { | |
| struct fb_fix_screeninfo *fix = &minfo->fbcon.fix; | |
| DBG(__func__) | |
| mutex_lock(&minfo->fbcon.mm_lock); | |
| fix->smem_start = minfo->video.base + minfo->curr.ydstorg.bytes; | |
| fix->smem_len = minfo->video.len_usable - minfo->curr.ydstorg.bytes; | |
| mutex_unlock(&minfo->fbcon.mm_lock); | |
| } | |
| static int matroxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
| { | |
| int err; | |
| int visual; | |
| int cmap_len; | |
| unsigned int ydstorg; | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| if (minfo->dead) { | |
| return -ENXIO; | |
| } | |
| if ((err = matroxfb_decode_var(minfo, var, &visual, &cmap_len, &ydstorg)) != 0) | |
| return err; | |
| return 0; | |
| } | |
| static int matroxfb_set_par(struct fb_info *info) | |
| { | |
| int err; | |
| int visual; | |
| int cmap_len; | |
| unsigned int ydstorg; | |
| struct fb_var_screeninfo *var; | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| DBG(__func__) | |
| if (minfo->dead) { | |
| return -ENXIO; | |
| } | |
| var = &info->var; | |
| if ((err = matroxfb_decode_var(minfo, var, &visual, &cmap_len, &ydstorg)) != 0) | |
| return err; | |
| minfo->fbcon.screen_base = vaddr_va(minfo->video.vbase) + ydstorg; | |
| matroxfb_update_fix(minfo); | |
| minfo->fbcon.fix.visual = visual; | |
| minfo->fbcon.fix.type = FB_TYPE_PACKED_PIXELS; | |
| minfo->fbcon.fix.type_aux = 0; | |
| minfo->fbcon.fix.line_length = (var->xres_virtual * var->bits_per_pixel) >> 3; | |
| { | |
| unsigned int pos; | |
| minfo->curr.cmap_len = cmap_len; | |
| ydstorg += minfo->devflags.ydstorg; | |
| minfo->curr.ydstorg.bytes = ydstorg; | |
| minfo->curr.ydstorg.chunks = ydstorg >> (isInterleave(minfo) ? 3 : 2); | |
| if (var->bits_per_pixel == 4) | |
| minfo->curr.ydstorg.pixels = ydstorg; | |
| else | |
| minfo->curr.ydstorg.pixels = (ydstorg * 8) / var->bits_per_pixel; | |
| minfo->curr.final_bppShift = matroxfb_get_final_bppShift(minfo, var->bits_per_pixel); | |
| { struct my_timming mt; | |
| struct matrox_hw_state* hw; | |
| int out; | |
| matroxfb_var2my(var, &mt); | |
| mt.crtc = MATROXFB_SRC_CRTC1; | |
| /* CRTC1 delays */ | |
| switch (var->bits_per_pixel) { | |
| case 0: mt.delay = 31 + 0; break; | |
| case 16: mt.delay = 21 + 8; break; | |
| case 24: mt.delay = 17 + 8; break; | |
| case 32: mt.delay = 16 + 8; break; | |
| default: mt.delay = 31 + 8; break; | |
| } | |
| hw = &minfo->hw; | |
| down_read(&minfo->altout.lock); | |
| for (out = 0; out < MATROXFB_MAX_OUTPUTS; out++) { | |
| if (minfo->outputs[out].src == MATROXFB_SRC_CRTC1 && | |
| minfo->outputs[out].output->compute) { | |
| minfo->outputs[out].output->compute(minfo->outputs[out].data, &mt); | |
| } | |
| } | |
| up_read(&minfo->altout.lock); | |
| minfo->crtc1.pixclock = mt.pixclock; | |
| minfo->crtc1.mnp = mt.mnp; | |
| minfo->hw_switch->init(minfo, &mt); | |
| pos = (var->yoffset * var->xres_virtual + var->xoffset) * minfo->curr.final_bppShift / 32; | |
| pos += minfo->curr.ydstorg.chunks; | |
| hw->CRTC[0x0D] = pos & 0xFF; | |
| hw->CRTC[0x0C] = (pos & 0xFF00) >> 8; | |
| hw->CRTCEXT[0] = (hw->CRTCEXT[0] & 0xF0) | ((pos >> 16) & 0x0F) | ((pos >> 14) & 0x40); | |
| hw->CRTCEXT[8] = pos >> 21; | |
| minfo->hw_switch->restore(minfo); | |
| update_crtc2(minfo, pos); | |
| down_read(&minfo->altout.lock); | |
| for (out = 0; out < MATROXFB_MAX_OUTPUTS; out++) { | |
| if (minfo->outputs[out].src == MATROXFB_SRC_CRTC1 && | |
| minfo->outputs[out].output->program) { | |
| minfo->outputs[out].output->program(minfo->outputs[out].data); | |
| } | |
| } | |
| for (out = 0; out < MATROXFB_MAX_OUTPUTS; out++) { | |
| if (minfo->outputs[out].src == MATROXFB_SRC_CRTC1 && | |
| minfo->outputs[out].output->start) { | |
| minfo->outputs[out].output->start(minfo->outputs[out].data); | |
| } | |
| } | |
| up_read(&minfo->altout.lock); | |
| matrox_cfbX_init(minfo); | |
| } | |
| } | |
| minfo->initialized = 1; | |
| return 0; | |
| } | |
| static int matroxfb_get_vblank(struct matrox_fb_info *minfo, | |
| struct fb_vblank *vblank) | |
| { | |
| unsigned int sts1; | |
| matroxfb_enable_irq(minfo, 0); | |
| memset(vblank, 0, sizeof(*vblank)); | |
| vblank->flags = FB_VBLANK_HAVE_VCOUNT | FB_VBLANK_HAVE_VSYNC | | |
| FB_VBLANK_HAVE_VBLANK | FB_VBLANK_HAVE_HBLANK; | |
| sts1 = mga_inb(M_INSTS1); | |
| vblank->vcount = mga_inl(M_VCOUNT); | |
| /* BTW, on my PIII/450 with G400, reading M_INSTS1 | |
| byte makes this call about 12% slower (1.70 vs. 2.05 us | |
| per ioctl()) */ | |
| if (sts1 & 1) | |
| vblank->flags |= FB_VBLANK_HBLANKING; | |
| if (sts1 & 8) | |
| vblank->flags |= FB_VBLANK_VSYNCING; | |
| if (vblank->vcount >= minfo->fbcon.var.yres) | |
| vblank->flags |= FB_VBLANK_VBLANKING; | |
| if (test_bit(0, &minfo->irq_flags)) { | |
| vblank->flags |= FB_VBLANK_HAVE_COUNT; | |
| /* Only one writer, aligned int value... | |
| it should work without lock and without atomic_t */ | |
| vblank->count = minfo->crtc1.vsync.cnt; | |
| } | |
| return 0; | |
| } | |
| static struct matrox_altout panellink_output = { | |
| .name = "Panellink output", | |
| }; | |
| static int matroxfb_ioctl(struct fb_info *info, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| void __user *argp = (void __user *)arg; | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| DBG(__func__) | |
| if (minfo->dead) { | |
| return -ENXIO; | |
| } | |
| switch (cmd) { | |
| case FBIOGET_VBLANK: | |
| { | |
| struct fb_vblank vblank; | |
| int err; | |
| err = matroxfb_get_vblank(minfo, &vblank); | |
| if (err) | |
| return err; | |
| if (copy_to_user(argp, &vblank, sizeof(vblank))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case FBIO_WAITFORVSYNC: | |
| { | |
| u_int32_t crt; | |
| if (get_user(crt, (u_int32_t __user *)arg)) | |
| return -EFAULT; | |
| return matroxfb_wait_for_sync(minfo, crt); | |
| } | |
| case MATROXFB_SET_OUTPUT_MODE: | |
| { | |
| struct matroxioc_output_mode mom; | |
| struct matrox_altout *oproc; | |
| int val; | |
| if (copy_from_user(&mom, argp, sizeof(mom))) | |
| return -EFAULT; | |
| if (mom.output >= MATROXFB_MAX_OUTPUTS) | |
| return -ENXIO; | |
| down_read(&minfo->altout.lock); | |
| oproc = minfo->outputs[mom.output].output; | |
| if (!oproc) { | |
| val = -ENXIO; | |
| } else if (!oproc->verifymode) { | |
| if (mom.mode == MATROXFB_OUTPUT_MODE_MONITOR) { | |
| val = 0; | |
| } else { | |
| val = -EINVAL; | |
| } | |
| } else { | |
| val = oproc->verifymode(minfo->outputs[mom.output].data, mom.mode); | |
| } | |
| if (!val) { | |
| if (minfo->outputs[mom.output].mode != mom.mode) { | |
| minfo->outputs[mom.output].mode = mom.mode; | |
| val = 1; | |
| } | |
| } | |
| up_read(&minfo->altout.lock); | |
| if (val != 1) | |
| return val; | |
| switch (minfo->outputs[mom.output].src) { | |
| case MATROXFB_SRC_CRTC1: | |
| matroxfb_set_par(info); | |
| break; | |
| case MATROXFB_SRC_CRTC2: | |
| { | |
| struct matroxfb_dh_fb_info* crtc2; | |
| down_read(&minfo->crtc2.lock); | |
| crtc2 = minfo->crtc2.info; | |
| if (crtc2) | |
| crtc2->fbcon.fbops->fb_set_par(&crtc2->fbcon); | |
| up_read(&minfo->crtc2.lock); | |
| } | |
| break; | |
| } | |
| return 0; | |
| } | |
| case MATROXFB_GET_OUTPUT_MODE: | |
| { | |
| struct matroxioc_output_mode mom; | |
| struct matrox_altout *oproc; | |
| int val; | |
| if (copy_from_user(&mom, argp, sizeof(mom))) | |
| return -EFAULT; | |
| if (mom.output >= MATROXFB_MAX_OUTPUTS) | |
| return -ENXIO; | |
| down_read(&minfo->altout.lock); | |
| oproc = minfo->outputs[mom.output].output; | |
| if (!oproc) { | |
| val = -ENXIO; | |
| } else { | |
| mom.mode = minfo->outputs[mom.output].mode; | |
| val = 0; | |
| } | |
| up_read(&minfo->altout.lock); | |
| if (val) | |
| return val; | |
| if (copy_to_user(argp, &mom, sizeof(mom))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case MATROXFB_SET_OUTPUT_CONNECTION: | |
| { | |
| u_int32_t tmp; | |
| int i; | |
| int changes; | |
| if (copy_from_user(&tmp, argp, sizeof(tmp))) | |
| return -EFAULT; | |
| for (i = 0; i < 32; i++) { | |
| if (tmp & (1 << i)) { | |
| if (i >= MATROXFB_MAX_OUTPUTS) | |
| return -ENXIO; | |
| if (!minfo->outputs[i].output) | |
| return -ENXIO; | |
| switch (minfo->outputs[i].src) { | |
| case MATROXFB_SRC_NONE: | |
| case MATROXFB_SRC_CRTC1: | |
| break; | |
| default: | |
| return -EBUSY; | |
| } | |
| } | |
| } | |
| if (minfo->devflags.panellink) { | |
| if (tmp & MATROXFB_OUTPUT_CONN_DFP) { | |
| if (tmp & MATROXFB_OUTPUT_CONN_SECONDARY) | |
| return -EINVAL; | |
| for (i = 0; i < MATROXFB_MAX_OUTPUTS; i++) { | |
| if (minfo->outputs[i].src == MATROXFB_SRC_CRTC2) { | |
| return -EBUSY; | |
| } | |
| } | |
| } | |
| } | |
| changes = 0; | |
| for (i = 0; i < MATROXFB_MAX_OUTPUTS; i++) { | |
| if (tmp & (1 << i)) { | |
| if (minfo->outputs[i].src != MATROXFB_SRC_CRTC1) { | |
| changes = 1; | |
| minfo->outputs[i].src = MATROXFB_SRC_CRTC1; | |
| } | |
| } else if (minfo->outputs[i].src == MATROXFB_SRC_CRTC1) { | |
| changes = 1; | |
| minfo->outputs[i].src = MATROXFB_SRC_NONE; | |
| } | |
| } | |
| if (!changes) | |
| return 0; | |
| matroxfb_set_par(info); | |
| return 0; | |
| } | |
| case MATROXFB_GET_OUTPUT_CONNECTION: | |
| { | |
| u_int32_t conn = 0; | |
| int i; | |
| for (i = 0; i < MATROXFB_MAX_OUTPUTS; i++) { | |
| if (minfo->outputs[i].src == MATROXFB_SRC_CRTC1) { | |
| conn |= 1 << i; | |
| } | |
| } | |
| if (put_user(conn, (u_int32_t __user *)arg)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case MATROXFB_GET_AVAILABLE_OUTPUTS: | |
| { | |
| u_int32_t conn = 0; | |
| int i; | |
| for (i = 0; i < MATROXFB_MAX_OUTPUTS; i++) { | |
| if (minfo->outputs[i].output) { | |
| switch (minfo->outputs[i].src) { | |
| case MATROXFB_SRC_NONE: | |
| case MATROXFB_SRC_CRTC1: | |
| conn |= 1 << i; | |
| break; | |
| } | |
| } | |
| } | |
| if (minfo->devflags.panellink) { | |
| if (conn & MATROXFB_OUTPUT_CONN_DFP) | |
| conn &= ~MATROXFB_OUTPUT_CONN_SECONDARY; | |
| if (conn & MATROXFB_OUTPUT_CONN_SECONDARY) | |
| conn &= ~MATROXFB_OUTPUT_CONN_DFP; | |
| } | |
| if (put_user(conn, (u_int32_t __user *)arg)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case MATROXFB_GET_ALL_OUTPUTS: | |
| { | |
| u_int32_t conn = 0; | |
| int i; | |
| for (i = 0; i < MATROXFB_MAX_OUTPUTS; i++) { | |
| if (minfo->outputs[i].output) { | |
| conn |= 1 << i; | |
| } | |
| } | |
| if (put_user(conn, (u_int32_t __user *)arg)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOC_QUERYCAP: | |
| { | |
| struct v4l2_capability r; | |
| memset(&r, 0, sizeof(r)); | |
| strcpy(r.driver, "matroxfb"); | |
| strcpy(r.card, "Matrox"); | |
| sprintf(r.bus_info, "PCI:%s", pci_name(minfo->pcidev)); | |
| r.version = KERNEL_VERSION(1,0,0); | |
| r.capabilities = V4L2_CAP_VIDEO_OUTPUT; | |
| if (copy_to_user(argp, &r, sizeof(r))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case VIDIOC_QUERYCTRL: | |
| { | |
| struct v4l2_queryctrl qctrl; | |
| int err; | |
| if (copy_from_user(&qctrl, argp, sizeof(qctrl))) | |
| return -EFAULT; | |
| down_read(&minfo->altout.lock); | |
| if (!minfo->outputs[1].output) { | |
| err = -ENXIO; | |
| } else if (minfo->outputs[1].output->getqueryctrl) { | |
| err = minfo->outputs[1].output->getqueryctrl(minfo->outputs[1].data, &qctrl); | |
| } else { | |
| err = -EINVAL; | |
| } | |
| up_read(&minfo->altout.lock); | |
| if (err >= 0 && | |
| copy_to_user(argp, &qctrl, sizeof(qctrl))) | |
| return -EFAULT; | |
| return err; | |
| } | |
| case VIDIOC_G_CTRL: | |
| { | |
| struct v4l2_control ctrl; | |
| int err; | |
| if (copy_from_user(&ctrl, argp, sizeof(ctrl))) | |
| return -EFAULT; | |
| down_read(&minfo->altout.lock); | |
| if (!minfo->outputs[1].output) { | |
| err = -ENXIO; | |
| } else if (minfo->outputs[1].output->getctrl) { | |
| err = minfo->outputs[1].output->getctrl(minfo->outputs[1].data, &ctrl); | |
| } else { | |
| err = -EINVAL; | |
| } | |
| up_read(&minfo->altout.lock); | |
| if (err >= 0 && | |
| copy_to_user(argp, &ctrl, sizeof(ctrl))) | |
| return -EFAULT; | |
| return err; | |
| } | |
| case VIDIOC_S_CTRL: | |
| { | |
| struct v4l2_control ctrl; | |
| int err; | |
| if (copy_from_user(&ctrl, argp, sizeof(ctrl))) | |
| return -EFAULT; | |
| down_read(&minfo->altout.lock); | |
| if (!minfo->outputs[1].output) { | |
| err = -ENXIO; | |
| } else if (minfo->outputs[1].output->setctrl) { | |
| err = minfo->outputs[1].output->setctrl(minfo->outputs[1].data, &ctrl); | |
| } else { | |
| err = -EINVAL; | |
| } | |
| up_read(&minfo->altout.lock); | |
| return err; | |
| } | |
| } | |
| return -ENOTTY; | |
| } | |
| /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */ | |
| static int matroxfb_blank(int blank, struct fb_info *info) | |
| { | |
| int seq; | |
| int crtc; | |
| CRITFLAGS | |
| struct matrox_fb_info *minfo = info2minfo(info); | |
| DBG(__func__) | |
| if (minfo->dead) | |
| return 1; | |
| switch (blank) { | |
| case FB_BLANK_NORMAL: seq = 0x20; crtc = 0x00; break; /* works ??? */ | |
| case FB_BLANK_VSYNC_SUSPEND: seq = 0x20; crtc = 0x10; break; | |
| case FB_BLANK_HSYNC_SUSPEND: seq = 0x20; crtc = 0x20; break; | |
| case FB_BLANK_POWERDOWN: seq = 0x20; crtc = 0x30; break; | |
| default: seq = 0x00; crtc = 0x00; break; | |
| } | |
| CRITBEGIN | |
| mga_outb(M_SEQ_INDEX, 1); | |
| mga_outb(M_SEQ_DATA, (mga_inb(M_SEQ_DATA) & ~0x20) | seq); | |
| mga_outb(M_EXTVGA_INDEX, 1); | |
| mga_outb(M_EXTVGA_DATA, (mga_inb(M_EXTVGA_DATA) & ~0x30) | crtc); | |
| CRITEND | |
| return 0; | |
| } | |
| static struct fb_ops matroxfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_open = matroxfb_open, | |
| .fb_release = matroxfb_release, | |
| .fb_check_var = matroxfb_check_var, | |
| .fb_set_par = matroxfb_set_par, | |
| .fb_setcolreg = matroxfb_setcolreg, | |
| .fb_pan_display =matroxfb_pan_display, | |
| .fb_blank = matroxfb_blank, | |
| .fb_ioctl = matroxfb_ioctl, | |
| /* .fb_fillrect = <set by matrox_cfbX_init>, */ | |
| /* .fb_copyarea = <set by matrox_cfbX_init>, */ | |
| /* .fb_imageblit = <set by matrox_cfbX_init>, */ | |
| /* .fb_cursor = <set by matrox_cfbX_init>, */ | |
| }; | |
| #define RSDepth(X) (((X) >> 8) & 0x0F) | |
| #define RS8bpp 0x1 | |
| #define RS15bpp 0x2 | |
| #define RS16bpp 0x3 | |
| #define RS32bpp 0x4 | |
| #define RS4bpp 0x5 | |
| #define RS24bpp 0x6 | |
| #define RSText 0x7 | |
| #define RSText8 0x8 | |
| /* 9-F */ | |
| static struct { struct fb_bitfield red, green, blue, transp; int bits_per_pixel; } colors[] = { | |
| { { 0, 8, 0}, { 0, 8, 0}, { 0, 8, 0}, { 0, 0, 0}, 8 }, | |
| { { 10, 5, 0}, { 5, 5, 0}, { 0, 5, 0}, { 15, 1, 0}, 16 }, | |
| { { 11, 5, 0}, { 5, 6, 0}, { 0, 5, 0}, { 0, 0, 0}, 16 }, | |
| { { 16, 8, 0}, { 8, 8, 0}, { 0, 8, 0}, { 24, 8, 0}, 32 }, | |
| { { 0, 8, 0}, { 0, 8, 0}, { 0, 8, 0}, { 0, 0, 0}, 4 }, | |
| { { 16, 8, 0}, { 8, 8, 0}, { 0, 8, 0}, { 0, 0, 0}, 24 }, | |
| { { 0, 6, 0}, { 0, 6, 0}, { 0, 6, 0}, { 0, 0, 0}, 0 }, /* textmode with (default) VGA8x16 */ | |
| { { 0, 6, 0}, { 0, 6, 0}, { 0, 6, 0}, { 0, 0, 0}, 0 }, /* textmode hardwired to VGA8x8 */ | |
| }; | |
| /* initialized by setup, see explanation at end of file (search for MODULE_PARM_DESC) */ | |
| static unsigned int mem; /* "matroxfb:mem:xxxxxM" */ | |
| static int option_precise_width = 1; /* cannot be changed, option_precise_width==0 must imply noaccel */ | |
| static int inv24; /* "matroxfb:inv24" */ | |
| static int cross4MB = -1; /* "matroxfb:cross4MB" */ | |
| static int disabled; /* "matroxfb:disabled" */ | |
| static int noaccel; /* "matroxfb:noaccel" */ | |
| static int nopan; /* "matroxfb:nopan" */ | |
| static int no_pci_retry; /* "matroxfb:nopciretry" */ | |
| static int novga; /* "matroxfb:novga" */ | |
| static int nobios; /* "matroxfb:nobios" */ | |
| static int noinit = 1; /* "matroxfb:init" */ | |
| static int inverse; /* "matroxfb:inverse" */ | |
| static int sgram; /* "matroxfb:sgram" */ | |
| #ifdef CONFIG_MTRR | |
| static int mtrr = 1; /* "matroxfb:nomtrr" */ | |
| #endif | |
| static int grayscale; /* "matroxfb:grayscale" */ | |
| static int dev = -1; /* "matroxfb:dev:xxxxx" */ | |
| static unsigned int vesa = ~0; /* "matroxfb:vesa:xxxxx" */ | |
| static int depth = -1; /* "matroxfb:depth:xxxxx" */ | |
| static unsigned int xres; /* "matroxfb:xres:xxxxx" */ | |
| static unsigned int yres; /* "matroxfb:yres:xxxxx" */ | |
| static unsigned int upper = ~0; /* "matroxfb:upper:xxxxx" */ | |
| static unsigned int lower = ~0; /* "matroxfb:lower:xxxxx" */ | |
| static unsigned int vslen; /* "matroxfb:vslen:xxxxx" */ | |
| static unsigned int left = ~0; /* "matroxfb:left:xxxxx" */ | |
| static unsigned int right = ~0; /* "matroxfb:right:xxxxx" */ | |
| static unsigned int hslen; /* "matroxfb:hslen:xxxxx" */ | |
| static unsigned int pixclock; /* "matroxfb:pixclock:xxxxx" */ | |
| static int sync = -1; /* "matroxfb:sync:xxxxx" */ | |
| static unsigned int fv; /* "matroxfb:fv:xxxxx" */ | |
| static unsigned int fh; /* "matroxfb:fh:xxxxxk" */ | |
| static unsigned int maxclk; /* "matroxfb:maxclk:xxxxM" */ | |
| static int dfp; /* "matroxfb:dfp */ | |
| static int dfp_type = -1; /* "matroxfb:dfp:xxx */ | |
| static int memtype = -1; /* "matroxfb:memtype:xxx" */ | |
| static char outputs[8]; /* "matroxfb:outputs:xxx" */ | |
| #ifndef MODULE | |
| static char videomode[64]; /* "matroxfb:mode:xxxxx" or "matroxfb:xxxxx" */ | |
| #endif | |
| static int matroxfb_getmemory(struct matrox_fb_info *minfo, | |
| unsigned int maxSize, unsigned int *realSize) | |
| { | |
| vaddr_t vm; | |
| unsigned int offs; | |
| unsigned int offs2; | |
| unsigned char orig; | |
| unsigned char bytes[32]; | |
| unsigned char* tmp; | |
| DBG(__func__) | |
| vm = minfo->video.vbase; | |
| maxSize &= ~0x1FFFFF; /* must be X*2MB (really it must be 2 or X*4MB) */ | |
| /* at least 2MB */ | |
| if (maxSize < 0x0200000) return 0; | |
| if (maxSize > 0x2000000) maxSize = 0x2000000; | |
| mga_outb(M_EXTVGA_INDEX, 0x03); | |
| orig = mga_inb(M_EXTVGA_DATA); | |
| mga_outb(M_EXTVGA_DATA, orig | 0x80); | |
| tmp = bytes; | |
| for (offs = 0x100000; offs < maxSize; offs += 0x200000) | |
| *tmp++ = mga_readb(vm, offs); | |
| for (offs = 0x100000; offs < maxSize; offs += 0x200000) | |
| mga_writeb(vm, offs, 0x02); | |
| mga_outb(M_CACHEFLUSH, 0x00); | |
| for (offs = 0x100000; offs < maxSize; offs += 0x200000) { | |
| if (mga_readb(vm, offs) != 0x02) | |
| break; | |
| mga_writeb(vm, offs, mga_readb(vm, offs) - 0x02); | |
| if (mga_readb(vm, offs)) | |
| break; | |
| } | |
| tmp = bytes; | |
| for (offs2 = 0x100000; offs2 < maxSize; offs2 += 0x200000) | |
| mga_writeb(vm, offs2, *tmp++); | |
| mga_outb(M_EXTVGA_INDEX, 0x03); | |
| mga_outb(M_EXTVGA_DATA, orig); | |
| *realSize = offs - 0x100000; | |
| #ifdef CONFIG_FB_MATROX_MILLENIUM | |
| minfo->interleave = !(!isMillenium(minfo) || ((offs - 0x100000) & 0x3FFFFF)); | |
| #endif | |
| return 1; | |
| } | |
| struct video_board { | |
| int maxvram; | |
| int maxdisplayable; | |
| int accelID; | |
| struct matrox_switch* lowlevel; | |
| }; | |
| #ifdef CONFIG_FB_MATROX_MILLENIUM | |
| static struct video_board vbMillennium = {0x0800000, 0x0800000, FB_ACCEL_MATROX_MGA2064W, &matrox_millennium}; | |
| static struct video_board vbMillennium2 = {0x1000000, 0x0800000, FB_ACCEL_MATROX_MGA2164W, &matrox_millennium}; | |
| static struct video_board vbMillennium2A = {0x1000000, 0x0800000, FB_ACCEL_MATROX_MGA2164W_AGP, &matrox_millennium}; | |
| #endif /* CONFIG_FB_MATROX_MILLENIUM */ | |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE | |
| static struct video_board vbMystique = {0x0800000, 0x0800000, FB_ACCEL_MATROX_MGA1064SG, &matrox_mystique}; | |
| #endif /* CONFIG_FB_MATROX_MYSTIQUE */ | |
| #ifdef CONFIG_FB_MATROX_G | |
| static struct video_board vbG100 = {0x0800000, 0x0800000, FB_ACCEL_MATROX_MGAG100, &matrox_G100}; | |
| static struct video_board vbG200 = {0x1000000, 0x1000000, FB_ACCEL_MATROX_MGAG200, &matrox_G100}; | |
| /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for | |
| whole 32MB */ | |
| static struct video_board vbG400 = {0x2000000, 0x1000000, FB_ACCEL_MATROX_MGAG400, &matrox_G100}; | |
| #endif | |
| #define DEVF_VIDEO64BIT 0x0001 | |
| #define DEVF_SWAPS 0x0002 | |
| #define DEVF_SRCORG 0x0004 | |
| #define DEVF_DUALHEAD 0x0008 | |
| #define DEVF_CROSS4MB 0x0010 | |
| #define DEVF_TEXT4B 0x0020 | |
| /* #define DEVF_recycled 0x0040 */ | |
| /* #define DEVF_recycled 0x0080 */ | |
| #define DEVF_SUPPORT32MB 0x0100 | |
| #define DEVF_ANY_VXRES 0x0200 | |
| #define DEVF_TEXT16B 0x0400 | |
| #define DEVF_CRTC2 0x0800 | |
| #define DEVF_MAVEN_CAPABLE 0x1000 | |
| #define DEVF_PANELLINK_CAPABLE 0x2000 | |
| #define DEVF_G450DAC 0x4000 | |
| #define DEVF_GCORE (DEVF_VIDEO64BIT | DEVF_SWAPS | DEVF_CROSS4MB) | |
| #define DEVF_G2CORE (DEVF_GCORE | DEVF_ANY_VXRES | DEVF_MAVEN_CAPABLE | DEVF_PANELLINK_CAPABLE | DEVF_SRCORG | DEVF_DUALHEAD) | |
| #define DEVF_G100 (DEVF_GCORE) /* no doc, no vxres... */ | |
| #define DEVF_G200 (DEVF_G2CORE) | |
| #define DEVF_G400 (DEVF_G2CORE | DEVF_SUPPORT32MB | DEVF_TEXT16B | DEVF_CRTC2) | |
| /* if you'll find how to drive DFP... */ | |
| #define DEVF_G450 (DEVF_GCORE | DEVF_ANY_VXRES | DEVF_SUPPORT32MB | DEVF_TEXT16B | DEVF_CRTC2 | DEVF_G450DAC | DEVF_SRCORG | DEVF_DUALHEAD) | |
| #define DEVF_G550 (DEVF_G450) | |
| static struct board { | |
| unsigned short vendor, device, rev, svid, sid; | |
| unsigned int flags; | |
| unsigned int maxclk; | |
| enum mga_chip chip; | |
| struct video_board* base; | |
| const char* name; | |
| } dev_list[] = { | |
| #ifdef CONFIG_FB_MATROX_MILLENIUM | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL, 0xFF, | |
| 0, 0, | |
| DEVF_TEXT4B, | |
| 230000, | |
| MGA_2064, | |
| &vbMillennium, | |
| "Millennium (PCI)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL_2, 0xFF, | |
| 0, 0, | |
| DEVF_SWAPS, | |
| 220000, | |
| MGA_2164, | |
| &vbMillennium2, | |
| "Millennium II (PCI)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL_2_AGP, 0xFF, | |
| 0, 0, | |
| DEVF_SWAPS, | |
| 250000, | |
| MGA_2164, | |
| &vbMillennium2A, | |
| "Millennium II (AGP)"}, | |
| #endif | |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS, 0x02, | |
| 0, 0, | |
| DEVF_VIDEO64BIT | DEVF_CROSS4MB, | |
| 180000, | |
| MGA_1064, | |
| &vbMystique, | |
| "Mystique (PCI)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS, 0xFF, | |
| 0, 0, | |
| DEVF_VIDEO64BIT | DEVF_SWAPS | DEVF_CROSS4MB, | |
| 220000, | |
| MGA_1164, | |
| &vbMystique, | |
| "Mystique 220 (PCI)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS_AGP, 0x02, | |
| 0, 0, | |
| DEVF_VIDEO64BIT | DEVF_CROSS4MB, | |
| 180000, | |
| MGA_1064, | |
| &vbMystique, | |
| "Mystique (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS_AGP, 0xFF, | |
| 0, 0, | |
| DEVF_VIDEO64BIT | DEVF_SWAPS | DEVF_CROSS4MB, | |
| 220000, | |
| MGA_1164, | |
| &vbMystique, | |
| "Mystique 220 (AGP)"}, | |
| #endif | |
| #ifdef CONFIG_FB_MATROX_G | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_MM, 0xFF, | |
| 0, 0, | |
| DEVF_G100, | |
| 230000, | |
| MGA_G100, | |
| &vbG100, | |
| "MGA-G100 (PCI)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_AGP, 0xFF, | |
| 0, 0, | |
| DEVF_G100, | |
| 230000, | |
| MGA_G100, | |
| &vbG100, | |
| "MGA-G100 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI, 0xFF, | |
| 0, 0, | |
| DEVF_G200, | |
| 250000, | |
| MGA_G200, | |
| &vbG200, | |
| "MGA-G200 (PCI)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF, | |
| PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC, | |
| DEVF_G200, | |
| 220000, | |
| MGA_G200, | |
| &vbG200, | |
| "MGA-G200 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF, | |
| PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_MYSTIQUE_G200_AGP, | |
| DEVF_G200, | |
| 230000, | |
| MGA_G200, | |
| &vbG200, | |
| "Mystique G200 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF, | |
| PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_MILLENIUM_G200_AGP, | |
| DEVF_G200, | |
| 250000, | |
| MGA_G200, | |
| &vbG200, | |
| "Millennium G200 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF, | |
| PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_MARVEL_G200_AGP, | |
| DEVF_G200, | |
| 230000, | |
| MGA_G200, | |
| &vbG200, | |
| "Marvel G200 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF, | |
| PCI_SS_VENDOR_ID_SIEMENS_NIXDORF, PCI_SS_ID_SIEMENS_MGA_G200_AGP, | |
| DEVF_G200, | |
| 230000, | |
| MGA_G200, | |
| &vbG200, | |
| "MGA-G200 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF, | |
| 0, 0, | |
| DEVF_G200, | |
| 230000, | |
| MGA_G200, | |
| &vbG200, | |
| "G200 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, 0x80, | |
| PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_MILLENNIUM_G400_MAX_AGP, | |
| DEVF_G400, | |
| 360000, | |
| MGA_G400, | |
| &vbG400, | |
| "Millennium G400 MAX (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, 0x80, | |
| 0, 0, | |
| DEVF_G400, | |
| 300000, | |
| MGA_G400, | |
| &vbG400, | |
| "G400 (AGP)"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, 0xFF, | |
| 0, 0, | |
| DEVF_G450, | |
| 360000, | |
| MGA_G450, | |
| &vbG400, | |
| "G450"}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G550, 0xFF, | |
| 0, 0, | |
| DEVF_G550, | |
| 360000, | |
| MGA_G550, | |
| &vbG400, | |
| "G550"}, | |
| #endif | |
| {0, 0, 0xFF, | |
| 0, 0, | |
| 0, | |
| 0, | |
| 0, | |
| NULL, | |
| NULL}}; | |
| #ifndef MODULE | |
| static struct fb_videomode defaultmode = { | |
| /* 640x480 @ 60Hz, 31.5 kHz */ | |
| NULL, 60, 640, 480, 39721, 40, 24, 32, 11, 96, 2, | |
| 0, FB_VMODE_NONINTERLACED | |
| }; | |
| #endif /* !MODULE */ | |
| static int hotplug = 0; | |
| static void setDefaultOutputs(struct matrox_fb_info *minfo) | |
| { | |
| unsigned int i; | |
| const char* ptr; | |
| minfo->outputs[0].default_src = MATROXFB_SRC_CRTC1; | |
| if (minfo->devflags.g450dac) { | |
| minfo->outputs[1].default_src = MATROXFB_SRC_CRTC1; | |
| minfo->outputs[2].default_src = MATROXFB_SRC_CRTC1; | |
| } else if (dfp) { | |
| minfo->outputs[2].default_src = MATROXFB_SRC_CRTC1; | |
| } | |
| ptr = outputs; | |
| for (i = 0; i < MATROXFB_MAX_OUTPUTS; i++) { | |
| char c = *ptr++; | |
| if (c == 0) { | |
| break; | |
| } | |
| if (c == '0') { | |
| minfo->outputs[i].default_src = MATROXFB_SRC_NONE; | |
| } else if (c == '1') { | |
| minfo->outputs[i].default_src = MATROXFB_SRC_CRTC1; | |
| } else if (c == '2' && minfo->devflags.crtc2) { | |
| minfo->outputs[i].default_src = MATROXFB_SRC_CRTC2; | |
| } else { | |
| printk(KERN_ERR "matroxfb: Unknown outputs setting\n"); | |
| break; | |
| } | |
| } | |
| /* Nullify this option for subsequent adapters */ | |
| outputs[0] = 0; | |
| } | |
| static int initMatrox2(struct matrox_fb_info *minfo, struct board *b) | |
| { | |
| unsigned long ctrlptr_phys = 0; | |
| unsigned long video_base_phys = 0; | |
| unsigned int memsize; | |
| int err; | |
| static struct pci_device_id intel_82437[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437) }, | |
| { }, | |
| }; | |
| DBG(__func__) | |
| /* set default values... */ | |
| vesafb_defined.accel_flags = FB_ACCELF_TEXT; | |
| minfo->hw_switch = b->base->lowlevel; | |
| minfo->devflags.accelerator = b->base->accelID; | |
| minfo->max_pixel_clock = b->maxclk; | |
| printk(KERN_INFO "matroxfb: Matrox %s detected\n", b->name); | |
| minfo->capable.plnwt = 1; | |
| minfo->chip = b->chip; | |
| minfo->capable.srcorg = b->flags & DEVF_SRCORG; | |
| minfo->devflags.video64bits = b->flags & DEVF_VIDEO64BIT; | |
| if (b->flags & DEVF_TEXT4B) { | |
| minfo->devflags.vgastep = 4; | |
| minfo->devflags.textmode = 4; | |
| minfo->devflags.text_type_aux = FB_AUX_TEXT_MGA_STEP16; | |
| } else if (b->flags & DEVF_TEXT16B) { | |
| minfo->devflags.vgastep = 16; | |
| minfo->devflags.textmode = 1; | |
| minfo->devflags.text_type_aux = FB_AUX_TEXT_MGA_STEP16; | |
| } else { | |
| minfo->devflags.vgastep = 8; | |
| minfo->devflags.textmode = 1; | |
| minfo->devflags.text_type_aux = FB_AUX_TEXT_MGA_STEP8; | |
| } | |
| minfo->devflags.support32MB = (b->flags & DEVF_SUPPORT32MB) != 0; | |
| minfo->devflags.precise_width = !(b->flags & DEVF_ANY_VXRES); | |
| minfo->devflags.crtc2 = (b->flags & DEVF_CRTC2) != 0; | |
| minfo->devflags.maven_capable = (b->flags & DEVF_MAVEN_CAPABLE) != 0; | |
| minfo->devflags.dualhead = (b->flags & DEVF_DUALHEAD) != 0; | |
| minfo->devflags.dfp_type = dfp_type; | |
| minfo->devflags.g450dac = (b->flags & DEVF_G450DAC) != 0; | |
| minfo->devflags.textstep = minfo->devflags.vgastep * minfo->devflags.textmode; | |
| minfo->devflags.textvram = 65536 / minfo->devflags.textmode; | |
| setDefaultOutputs(minfo); | |
| if (b->flags & DEVF_PANELLINK_CAPABLE) { | |
| minfo->outputs[2].data = minfo; | |
| minfo->outputs[2].output = &panellink_output; | |
| minfo->outputs[2].src = minfo->outputs[2].default_src; | |
| minfo->outputs[2].mode = MATROXFB_OUTPUT_MODE_MONITOR; | |
| minfo->devflags.panellink = 1; | |
| } | |
| if (minfo->capable.cross4MB < 0) | |
| minfo->capable.cross4MB = b->flags & DEVF_CROSS4MB; | |
| if (b->flags & DEVF_SWAPS) { | |
| ctrlptr_phys = pci_resource_start(minfo->pcidev, 1); | |
| video_base_phys = pci_resource_start(minfo->pcidev, 0); | |
| minfo->devflags.fbResource = PCI_BASE_ADDRESS_0; | |
| } else { | |
| ctrlptr_phys = pci_resource_start(minfo->pcidev, 0); | |
| video_base_phys = pci_resource_start(minfo->pcidev, 1); | |
| minfo->devflags.fbResource = PCI_BASE_ADDRESS_1; | |
| } | |
| err = -EINVAL; | |
| if (!ctrlptr_phys) { | |
| printk(KERN_ERR "matroxfb: control registers are not available, matroxfb disabled\n"); | |
| goto fail; | |
| } | |
| if (!video_base_phys) { | |
| printk(KERN_ERR "matroxfb: video RAM is not available in PCI address space, matroxfb disabled\n"); | |
| goto fail; | |
| } | |
| memsize = b->base->maxvram; | |
| if (!request_mem_region(ctrlptr_phys, 16384, "matroxfb MMIO")) { | |
| goto fail; | |
| } | |
| if (!request_mem_region(video_base_phys, memsize, "matroxfb FB")) { | |
| goto failCtrlMR; | |
| } | |
| minfo->video.len_maximum = memsize; | |
| /* convert mem (autodetect k, M) */ | |
| if (mem < 1024) mem *= 1024; | |
| if (mem < 0x00100000) mem *= 1024; | |
| if (mem && (mem < memsize)) | |
| memsize = mem; | |
| err = -ENOMEM; | |
| if (mga_ioremap(ctrlptr_phys, 16384, MGA_IOREMAP_MMIO, &minfo->mmio.vbase)) { | |
| printk(KERN_ERR "matroxfb: cannot ioremap(%lX, 16384), matroxfb disabled\n", ctrlptr_phys); | |
| goto failVideoMR; | |
| } | |
| minfo->mmio.base = ctrlptr_phys; | |
| minfo->mmio.len = 16384; | |
| minfo->video.base = video_base_phys; | |
| if (mga_ioremap(video_base_phys, memsize, MGA_IOREMAP_FB, &minfo->video.vbase)) { | |
| printk(KERN_ERR "matroxfb: cannot ioremap(%lX, %d), matroxfb disabled\n", | |
| video_base_phys, memsize); | |
| goto failCtrlIO; | |
| } | |
| { | |
| u_int32_t cmd; | |
| u_int32_t mga_option; | |
| pci_read_config_dword(minfo->pcidev, PCI_OPTION_REG, &mga_option); | |
| pci_read_config_dword(minfo->pcidev, PCI_COMMAND, &cmd); | |
| mga_option &= 0x7FFFFFFF; /* clear BIG_ENDIAN */ | |
| mga_option |= MX_OPTION_BSWAP; | |
| /* disable palette snooping */ | |
| cmd &= ~PCI_COMMAND_VGA_PALETTE; | |
| if (pci_dev_present(intel_82437)) { | |
| if (!(mga_option & 0x20000000) && !minfo->devflags.nopciretry) { | |
| printk(KERN_WARNING "matroxfb: Disabling PCI retries due to i82437 present\n"); | |
| } | |
| mga_option |= 0x20000000; | |
| minfo->devflags.nopciretry = 1; | |
| } | |
| pci_write_config_dword(minfo->pcidev, PCI_COMMAND, cmd); | |
| pci_write_config_dword(minfo->pcidev, PCI_OPTION_REG, mga_option); | |
| minfo->hw.MXoptionReg = mga_option; | |
| /* select non-DMA memory for PCI_MGA_DATA, otherwise dump of PCI cfg space can lock PCI bus */ | |
| /* maybe preinit() candidate, but it is same... for all devices... at this time... */ | |
| pci_write_config_dword(minfo->pcidev, PCI_MGA_INDEX, 0x00003C00); | |
| } | |
| err = -ENXIO; | |
| matroxfb_read_pins(minfo); | |
| if (minfo->hw_switch->preinit(minfo)) { | |
| goto failVideoIO; | |
| } | |
| err = -ENOMEM; | |
| if (!matroxfb_getmemory(minfo, memsize, &minfo->video.len) || !minfo->video.len) { | |
| printk(KERN_ERR "matroxfb: cannot determine memory size\n"); | |
| goto failVideoIO; | |
| } | |
| minfo->devflags.ydstorg = 0; | |
| minfo->video.base = video_base_phys; | |
| minfo->video.len_usable = minfo->video.len; | |
| if (minfo->video.len_usable > b->base->maxdisplayable) | |
| minfo->video.len_usable = b->base->maxdisplayable; | |
| #ifdef CONFIG_MTRR | |
| if (mtrr) { | |
| minfo->mtrr.vram = mtrr_add(video_base_phys, minfo->video.len, MTRR_TYPE_WRCOMB, 1); | |
| minfo->mtrr.vram_valid = 1; | |
| printk(KERN_INFO "matroxfb: MTRR's turned on\n"); | |
| } | |
| #endif /* CONFIG_MTRR */ | |
| if (!minfo->devflags.novga) | |
| request_region(0x3C0, 32, "matrox"); | |
| matroxfb_g450_connect(minfo); | |
| minfo->hw_switch->reset(minfo); | |
| minfo->fbcon.monspecs.hfmin = 0; | |
| minfo->fbcon.monspecs.hfmax = fh; | |
| minfo->fbcon.monspecs.vfmin = 0; | |
| minfo->fbcon.monspecs.vfmax = fv; | |
| minfo->fbcon.monspecs.dpms = 0; /* TBD */ | |
| /* static settings */ | |
| vesafb_defined.red = colors[depth-1].red; | |
| vesafb_defined.green = colors[depth-1].green; | |
| vesafb_defined.blue = colors[depth-1].blue; | |
| vesafb_defined.bits_per_pixel = colors[depth-1].bits_per_pixel; | |
| vesafb_defined.grayscale = grayscale; | |
| vesafb_defined.vmode = 0; | |
| if (noaccel) | |
| vesafb_defined.accel_flags &= ~FB_ACCELF_TEXT; | |
| minfo->fbops = matroxfb_ops; | |
| minfo->fbcon.fbops = &minfo->fbops; | |
| minfo->fbcon.pseudo_palette = minfo->cmap; | |
| /* after __init time we are like module... no logo */ | |
| minfo->fbcon.flags = hotplug ? FBINFO_FLAG_MODULE : FBINFO_FLAG_DEFAULT; | |
| minfo->fbcon.flags |= FBINFO_PARTIAL_PAN_OK | /* Prefer panning for scroll under MC viewer/edit */ | |
| FBINFO_HWACCEL_COPYAREA | /* We have hw-assisted bmove */ | |
| FBINFO_HWACCEL_FILLRECT | /* And fillrect */ | |
| FBINFO_HWACCEL_IMAGEBLIT | /* And imageblit */ | |
| FBINFO_HWACCEL_XPAN | /* And we support both horizontal */ | |
| FBINFO_HWACCEL_YPAN; /* And vertical panning */ | |
| minfo->video.len_usable &= PAGE_MASK; | |
| fb_alloc_cmap(&minfo->fbcon.cmap, 256, 1); | |
| #ifndef MODULE | |
| /* mode database is marked __init!!! */ | |
| if (!hotplug) { | |
| fb_find_mode(&vesafb_defined, &minfo->fbcon, videomode[0] ? videomode : NULL, | |
| NULL, 0, &defaultmode, vesafb_defined.bits_per_pixel); | |
| } | |
| #endif /* !MODULE */ | |
| /* mode modifiers */ | |
| if (hslen) | |
| vesafb_defined.hsync_len = hslen; | |
| if (vslen) | |
| vesafb_defined.vsync_len = vslen; | |
| if (left != ~0) | |
| vesafb_defined.left_margin = left; | |
| if (right != ~0) | |
| vesafb_defined.right_margin = right; | |
| if (upper != ~0) | |
| vesafb_defined.upper_margin = upper; | |
| if (lower != ~0) | |
| vesafb_defined.lower_margin = lower; | |
| if (xres) | |
| vesafb_defined.xres = xres; | |
| if (yres) | |
| vesafb_defined.yres = yres; | |
| if (sync != -1) | |
| vesafb_defined.sync = sync; | |
| else if (vesafb_defined.sync == ~0) { | |
| vesafb_defined.sync = 0; | |
| if (yres < 400) | |
| vesafb_defined.sync |= FB_SYNC_HOR_HIGH_ACT; | |
| else if (yres < 480) | |
| vesafb_defined.sync |= FB_SYNC_VERT_HIGH_ACT; | |
| } | |
| /* fv, fh, maxclk limits was specified */ | |
| { | |
| unsigned int tmp; | |
| if (fv) { | |
| tmp = fv * (vesafb_defined.upper_margin + vesafb_defined.yres | |
| + vesafb_defined.lower_margin + vesafb_defined.vsync_len); | |
| if ((tmp < fh) || (fh == 0)) fh = tmp; | |
| } | |
| if (fh) { | |
| tmp = fh * (vesafb_defined.left_margin + vesafb_defined.xres | |
| + vesafb_defined.right_margin + vesafb_defined.hsync_len); | |
| if ((tmp < maxclk) || (maxclk == 0)) maxclk = tmp; | |
| } | |
| tmp = (maxclk + 499) / 500; | |
| if (tmp) { | |
| tmp = (2000000000 + tmp) / tmp; | |
| if (tmp > pixclock) pixclock = tmp; | |
| } | |
| } | |
| if (pixclock) { | |
| if (pixclock < 2000) /* > 500MHz */ | |
| pixclock = 4000; /* 250MHz */ | |
| if (pixclock > 1000000) | |
| pixclock = 1000000; /* 1MHz */ | |
| vesafb_defined.pixclock = pixclock; | |
| } | |
| /* FIXME: Where to move this?! */ | |
| #if defined(CONFIG_PPC_PMAC) | |
| #ifndef MODULE | |
| if (machine_is(powermac)) { | |
| struct fb_var_screeninfo var; | |
| if (default_vmode <= 0 || default_vmode > VMODE_MAX) | |
| default_vmode = VMODE_640_480_60; | |
| #ifdef CONFIG_NVRAM | |
| if (default_cmode == CMODE_NVRAM) | |
| default_cmode = nvram_read_byte(NV_CMODE); | |
| #endif | |
| if (default_cmode < CMODE_8 || default_cmode > CMODE_32) | |
| default_cmode = CMODE_8; | |
| if (!mac_vmode_to_var(default_vmode, default_cmode, &var)) { | |
| var.accel_flags = vesafb_defined.accel_flags; | |
| var.xoffset = var.yoffset = 0; | |
| /* Note: mac_vmode_to_var() does not set all parameters */ | |
| vesafb_defined = var; | |
| } | |
| } | |
| #endif /* !MODULE */ | |
| #endif /* CONFIG_PPC_PMAC */ | |
| vesafb_defined.xres_virtual = vesafb_defined.xres; | |
| if (nopan) { | |
| vesafb_defined.yres_virtual = vesafb_defined.yres; | |
| } else { | |
| vesafb_defined.yres_virtual = 65536; /* large enough to be INF, but small enough | |
| to yres_virtual * xres_virtual < 2^32 */ | |
| } | |
| matroxfb_init_fix(minfo); | |
| minfo->fbcon.screen_base = vaddr_va(minfo->video.vbase); | |
| /* Normalize values (namely yres_virtual) */ | |
| matroxfb_check_var(&vesafb_defined, &minfo->fbcon); | |
| /* And put it into "current" var. Do NOT program hardware yet, or we'll not take over | |
| * vgacon correctly. fbcon_startup will call fb_set_par for us, WITHOUT check_var, | |
| * and unfortunately it will do it BEFORE vgacon contents is saved, so it won't work | |
| * anyway. But we at least tried... */ | |
| minfo->fbcon.var = vesafb_defined; | |
| err = -EINVAL; | |
| printk(KERN_INFO "matroxfb: %dx%dx%dbpp (virtual: %dx%d)\n", | |
| vesafb_defined.xres, vesafb_defined.yres, vesafb_defined.bits_per_pixel, | |
| vesafb_defined.xres_virtual, vesafb_defined.yres_virtual); | |
| printk(KERN_INFO "matroxfb: framebuffer at 0x%lX, mapped to 0x%p, size %d\n", | |
| minfo->video.base, vaddr_va(minfo->video.vbase), minfo->video.len); | |
| /* We do not have to set currcon to 0... register_framebuffer do it for us on first console | |
| * and we do not want currcon == 0 for subsequent framebuffers */ | |
| minfo->fbcon.device = &minfo->pcidev->dev; | |
| if (register_framebuffer(&minfo->fbcon) < 0) { | |
| goto failVideoIO; | |
| } | |
| fb_info(&minfo->fbcon, "%s frame buffer device\n", minfo->fbcon.fix.id); | |
| /* there is no console on this fb... but we have to initialize hardware | |
| * until someone tells me what is proper thing to do */ | |
| if (!minfo->initialized) { | |
| fb_info(&minfo->fbcon, "initializing hardware\n"); | |
| /* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var | |
| * already before, so register_framebuffer works correctly. */ | |
| vesafb_defined.activate |= FB_ACTIVATE_FORCE; | |
| fb_set_var(&minfo->fbcon, &vesafb_defined); | |
| } | |
| return 0; | |
| failVideoIO:; | |
| matroxfb_g450_shutdown(minfo); | |
| mga_iounmap(minfo->video.vbase); | |
| failCtrlIO:; | |
| mga_iounmap(minfo->mmio.vbase); | |
| failVideoMR:; | |
| release_mem_region(video_base_phys, minfo->video.len_maximum); | |
| failCtrlMR:; | |
| release_mem_region(ctrlptr_phys, 16384); | |
| fail:; | |
| return err; | |
| } | |
| static LIST_HEAD(matroxfb_list); | |
| static LIST_HEAD(matroxfb_driver_list); | |
| #define matroxfb_l(x) list_entry(x, struct matrox_fb_info, next_fb) | |
| #define matroxfb_driver_l(x) list_entry(x, struct matroxfb_driver, node) | |
| int matroxfb_register_driver(struct matroxfb_driver* drv) { | |
| struct matrox_fb_info* minfo; | |
| list_add(&drv->node, &matroxfb_driver_list); | |
| for (minfo = matroxfb_l(matroxfb_list.next); | |
| minfo != matroxfb_l(&matroxfb_list); | |
| minfo = matroxfb_l(minfo->next_fb.next)) { | |
| void* p; | |
| if (minfo->drivers_count == MATROXFB_MAX_FB_DRIVERS) | |
| continue; | |
| p = drv->probe(minfo); | |
| if (p) { | |
| minfo->drivers_data[minfo->drivers_count] = p; | |
| minfo->drivers[minfo->drivers_count++] = drv; | |
| } | |
| } | |
| return 0; | |
| } | |
| void matroxfb_unregister_driver(struct matroxfb_driver* drv) { | |
| struct matrox_fb_info* minfo; | |
| list_del(&drv->node); | |
| for (minfo = matroxfb_l(matroxfb_list.next); | |
| minfo != matroxfb_l(&matroxfb_list); | |
| minfo = matroxfb_l(minfo->next_fb.next)) { | |
| int i; | |
| for (i = 0; i < minfo->drivers_count; ) { | |
| if (minfo->drivers[i] == drv) { | |
| if (drv && drv->remove) | |
| drv->remove(minfo, minfo->drivers_data[i]); | |
| minfo->drivers[i] = minfo->drivers[--minfo->drivers_count]; | |
| minfo->drivers_data[i] = minfo->drivers_data[minfo->drivers_count]; | |
| } else | |
| i++; | |
| } | |
| } | |
| } | |
| static void matroxfb_register_device(struct matrox_fb_info* minfo) { | |
| struct matroxfb_driver* drv; | |
| int i = 0; | |
| list_add(&minfo->next_fb, &matroxfb_list); | |
| for (drv = matroxfb_driver_l(matroxfb_driver_list.next); | |
| drv != matroxfb_driver_l(&matroxfb_driver_list); | |
| drv = matroxfb_driver_l(drv->node.next)) { | |
| if (drv && drv->probe) { | |
| void *p = drv->probe(minfo); | |
| if (p) { | |
| minfo->drivers_data[i] = p; | |
| minfo->drivers[i++] = drv; | |
| if (i == MATROXFB_MAX_FB_DRIVERS) | |
| break; | |
| } | |
| } | |
| } | |
| minfo->drivers_count = i; | |
| } | |
| static void matroxfb_unregister_device(struct matrox_fb_info* minfo) { | |
| int i; | |
| list_del(&minfo->next_fb); | |
| for (i = 0; i < minfo->drivers_count; i++) { | |
| struct matroxfb_driver* drv = minfo->drivers[i]; | |
| if (drv && drv->remove) | |
| drv->remove(minfo, minfo->drivers_data[i]); | |
| } | |
| } | |
| static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dummy) { | |
| struct board* b; | |
| u_int16_t svid; | |
| u_int16_t sid; | |
| struct matrox_fb_info* minfo; | |
| int err; | |
| u_int32_t cmd; | |
| DBG(__func__) | |
| svid = pdev->subsystem_vendor; | |
| sid = pdev->subsystem_device; | |
| for (b = dev_list; b->vendor; b++) { | |
| if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < pdev->revision)) continue; | |
| if (b->svid) | |
| if ((b->svid != svid) || (b->sid != sid)) continue; | |
| break; | |
| } | |
| /* not match... */ | |
| if (!b->vendor) | |
| return -ENODEV; | |
| if (dev > 0) { | |
| /* not requested one... */ | |
| dev--; | |
| return -ENODEV; | |
| } | |
| pci_read_config_dword(pdev, PCI_COMMAND, &cmd); | |
| if (pci_enable_device(pdev)) { | |
| return -1; | |
| } | |
| minfo = kzalloc(sizeof(*minfo), GFP_KERNEL); | |
| if (!minfo) | |
| return -1; | |
| minfo->pcidev = pdev; | |
| minfo->dead = 0; | |
| minfo->usecount = 0; | |
| minfo->userusecount = 0; | |
| pci_set_drvdata(pdev, minfo); | |
| /* DEVFLAGS */ | |
| minfo->devflags.memtype = memtype; | |
| if (memtype != -1) | |
| noinit = 0; | |
| if (cmd & PCI_COMMAND_MEMORY) { | |
| minfo->devflags.novga = novga; | |
| minfo->devflags.nobios = nobios; | |
| minfo->devflags.noinit = noinit; | |
| /* subsequent heads always needs initialization and must not enable BIOS */ | |
| novga = 1; | |
| nobios = 1; | |
| noinit = 0; | |
| } else { | |
| minfo->devflags.novga = 1; | |
| minfo->devflags.nobios = 1; | |
| minfo->devflags.noinit = 0; | |
| } | |
| minfo->devflags.nopciretry = no_pci_retry; | |
| minfo->devflags.mga_24bpp_fix = inv24; | |
| minfo->devflags.precise_width = option_precise_width; | |
| minfo->devflags.sgram = sgram; | |
| minfo->capable.cross4MB = cross4MB; | |
| spin_lock_init(&minfo->lock.DAC); | |
| spin_lock_init(&minfo->lock.accel); | |
| init_rwsem(&minfo->crtc2.lock); | |
| init_rwsem(&minfo->altout.lock); | |
| mutex_init(&minfo->fbcon.mm_lock); | |
| minfo->irq_flags = 0; | |
| init_waitqueue_head(&minfo->crtc1.vsync.wait); | |
| init_waitqueue_head(&minfo->crtc2.vsync.wait); | |
| minfo->crtc1.panpos = -1; | |
| err = initMatrox2(minfo, b); | |
| if (!err) { | |
| matroxfb_register_device(minfo); | |
| return 0; | |
| } | |
| kfree(minfo); | |
| return -1; | |
| } | |
| static void pci_remove_matrox(struct pci_dev* pdev) { | |
| struct matrox_fb_info* minfo; | |
| minfo = pci_get_drvdata(pdev); | |
| matroxfb_remove(minfo, 1); | |
| } | |
| static struct pci_device_id matroxfb_devices[] = { | |
| #ifdef CONFIG_FB_MATROX_MILLENIUM | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL_2, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL_2_AGP, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| #endif | |
| #ifdef CONFIG_FB_MATROX_MYSTIQUE | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| #endif | |
| #ifdef CONFIG_FB_MATROX_G | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_MM, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G100_AGP, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G550, | |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, | |
| #endif | |
| {0, 0, | |
| 0, 0, 0, 0, 0} | |
| }; | |
| MODULE_DEVICE_TABLE(pci, matroxfb_devices); | |
| static struct pci_driver matroxfb_driver = { | |
| .name = "matroxfb", | |
| .id_table = matroxfb_devices, | |
| .probe = matroxfb_probe, | |
| .remove = pci_remove_matrox, | |
| }; | |
| /* **************************** init-time only **************************** */ | |
| #define RSResolution(X) ((X) & 0x0F) | |
| #define RS640x400 1 | |
| #define RS640x480 2 | |
| #define RS800x600 3 | |
| #define RS1024x768 4 | |
| #define RS1280x1024 5 | |
| #define RS1600x1200 6 | |
| #define RS768x576 7 | |
| #define RS960x720 8 | |
| #define RS1152x864 9 | |
| #define RS1408x1056 10 | |
| #define RS640x350 11 | |
| #define RS1056x344 12 /* 132 x 43 text */ | |
| #define RS1056x400 13 /* 132 x 50 text */ | |
| #define RS1056x480 14 /* 132 x 60 text */ | |
| #define RSNoxNo 15 | |
| /* 10-FF */ | |
| static struct { int xres, yres, left, right, upper, lower, hslen, vslen, vfreq; } timmings[] __initdata = { | |
| { 640, 400, 48, 16, 39, 8, 96, 2, 70 }, | |
| { 640, 480, 48, 16, 33, 10, 96, 2, 60 }, | |
| { 800, 600, 144, 24, 28, 8, 112, 6, 60 }, | |
| { 1024, 768, 160, 32, 30, 4, 128, 4, 60 }, | |
| { 1280, 1024, 224, 32, 32, 4, 136, 4, 60 }, | |
| { 1600, 1200, 272, 48, 32, 5, 152, 5, 60 }, | |
| { 768, 576, 144, 16, 28, 6, 112, 4, 60 }, | |
| { 960, 720, 144, 24, 28, 8, 112, 4, 60 }, | |
| { 1152, 864, 192, 32, 30, 4, 128, 4, 60 }, | |
| { 1408, 1056, 256, 40, 32, 5, 144, 5, 60 }, | |
| { 640, 350, 48, 16, 39, 8, 96, 2, 70 }, | |
| { 1056, 344, 96, 24, 59, 44, 160, 2, 70 }, | |
| { 1056, 400, 96, 24, 39, 8, 160, 2, 70 }, | |
| { 1056, 480, 96, 24, 36, 12, 160, 3, 60 }, | |
| { 0, 0, ~0, ~0, ~0, ~0, 0, 0, 0 } | |
| }; | |
| #define RSCreate(X,Y) ((X) | ((Y) << 8)) | |
| static struct { unsigned int vesa; unsigned int info; } *RSptr, vesamap[] __initdata = { | |
| /* default must be first */ | |
| { ~0, RSCreate(RSNoxNo, RS8bpp ) }, | |
| { 0x101, RSCreate(RS640x480, RS8bpp ) }, | |
| { 0x100, RSCreate(RS640x400, RS8bpp ) }, | |
| { 0x180, RSCreate(RS768x576, RS8bpp ) }, | |
| { 0x103, RSCreate(RS800x600, RS8bpp ) }, | |
| { 0x188, RSCreate(RS960x720, RS8bpp ) }, | |
| { 0x105, RSCreate(RS1024x768, RS8bpp ) }, | |
| { 0x190, RSCreate(RS1152x864, RS8bpp ) }, | |
| { 0x107, RSCreate(RS1280x1024, RS8bpp ) }, | |
| { 0x198, RSCreate(RS1408x1056, RS8bpp ) }, | |
| { 0x11C, RSCreate(RS1600x1200, RS8bpp ) }, | |
| { 0x110, RSCreate(RS640x480, RS15bpp) }, | |
| { 0x181, RSCreate(RS768x576, RS15bpp) }, | |
| { 0x113, RSCreate(RS800x600, RS15bpp) }, | |
| { 0x189, RSCreate(RS960x720, RS15bpp) }, | |
| { 0x116, RSCreate(RS1024x768, RS15bpp) }, | |
| { 0x191, RSCreate(RS1152x864, RS15bpp) }, | |
| { 0x119, RSCreate(RS1280x1024, RS15bpp) }, | |
| { 0x199, RSCreate(RS1408x1056, RS15bpp) }, | |
| { 0x11D, RSCreate(RS1600x1200, RS15bpp) }, | |
| { 0x111, RSCreate(RS640x480, RS16bpp) }, | |
| { 0x182, RSCreate(RS768x576, RS16bpp) }, | |
| { 0x114, RSCreate(RS800x600, RS16bpp) }, | |
| { 0x18A, RSCreate(RS960x720, RS16bpp) }, | |
| { 0x117, RSCreate(RS1024x768, RS16bpp) }, | |
| { 0x192, RSCreate(RS1152x864, RS16bpp) }, | |
| { 0x11A, RSCreate(RS1280x1024, RS16bpp) }, | |
| { 0x19A, RSCreate(RS1408x1056, RS16bpp) }, | |
| { 0x11E, RSCreate(RS1600x1200, RS16bpp) }, | |
| { 0x1B2, RSCreate(RS640x480, RS24bpp) }, | |
| { 0x184, RSCreate(RS768x576, RS24bpp) }, | |
| { 0x1B5, RSCreate(RS800x600, RS24bpp) }, | |
| { 0x18C, RSCreate(RS960x720, RS24bpp) }, | |
| { 0x1B8, RSCreate(RS1024x768, RS24bpp) }, | |
| { 0x194, RSCreate(RS1152x864, RS24bpp) }, | |
| { 0x1BB, RSCreate(RS1280x1024, RS24bpp) }, | |
| { 0x19C, RSCreate(RS1408x1056, RS24bpp) }, | |
| { 0x1BF, RSCreate(RS1600x1200, RS24bpp) }, | |
| { 0x112, RSCreate(RS640x480, RS32bpp) }, | |
| { 0x183, RSCreate(RS768x576, RS32bpp) }, | |
| { 0x115, RSCreate(RS800x600, RS32bpp) }, | |
| { 0x18B, RSCreate(RS960x720, RS32bpp) }, | |
| { 0x118, RSCreate(RS1024x768, RS32bpp) }, | |
| { 0x193, RSCreate(RS1152x864, RS32bpp) }, | |
| { 0x11B, RSCreate(RS1280x1024, RS32bpp) }, | |
| { 0x19B, RSCreate(RS1408x1056, RS32bpp) }, | |
| { 0x11F, RSCreate(RS1600x1200, RS32bpp) }, | |
| { 0x010, RSCreate(RS640x350, RS4bpp ) }, | |
| { 0x012, RSCreate(RS640x480, RS4bpp ) }, | |
| { 0x102, RSCreate(RS800x600, RS4bpp ) }, | |
| { 0x104, RSCreate(RS1024x768, RS4bpp ) }, | |
| { 0x106, RSCreate(RS1280x1024, RS4bpp ) }, | |
| { 0, 0 }}; | |
| static void __init matroxfb_init_params(void) { | |
| /* fh from kHz to Hz */ | |
| if (fh < 1000) | |
| fh *= 1000; /* 1kHz minimum */ | |
| /* maxclk */ | |
| if (maxclk < 1000) maxclk *= 1000; /* kHz -> Hz, MHz -> kHz */ | |
| if (maxclk < 1000000) maxclk *= 1000; /* kHz -> Hz, 1MHz minimum */ | |
| /* fix VESA number */ | |
| if (vesa != ~0) | |
| vesa &= 0x1DFF; /* mask out clearscreen, acceleration and so on */ | |
| /* static settings */ | |
| for (RSptr = vesamap; RSptr->vesa; RSptr++) { | |
| if (RSptr->vesa == vesa) break; | |
| } | |
| if (!RSptr->vesa) { | |
| printk(KERN_ERR "Invalid vesa mode 0x%04X\n", vesa); | |
| RSptr = vesamap; | |
| } | |
| { | |
| int res = RSResolution(RSptr->info)-1; | |
| if (left == ~0) | |
| left = timmings[res].left; | |
| if (!xres) | |
| xres = timmings[res].xres; | |
| if (right == ~0) | |
| right = timmings[res].right; | |
| if (!hslen) | |
| hslen = timmings[res].hslen; | |
| if (upper == ~0) | |
| upper = timmings[res].upper; | |
| if (!yres) | |
| yres = timmings[res].yres; | |
| if (lower == ~0) | |
| lower = timmings[res].lower; | |
| if (!vslen) | |
| vslen = timmings[res].vslen; | |
| if (!(fv||fh||maxclk||pixclock)) | |
| fv = timmings[res].vfreq; | |
| if (depth == -1) | |
| depth = RSDepth(RSptr->info); | |
| } | |
| } | |
| static int __init matrox_init(void) { | |
| int err; | |
| matroxfb_init_params(); | |
| err = pci_register_driver(&matroxfb_driver); | |
| dev = -1; /* accept all new devices... */ | |
| return err; | |
| } | |
| /* **************************** exit-time only **************************** */ | |
| static void __exit matrox_done(void) { | |
| pci_unregister_driver(&matroxfb_driver); | |
| } | |
| #ifndef MODULE | |
| /* ************************* init in-kernel code ************************** */ | |
| static int __init matroxfb_setup(char *options) { | |
| char *this_opt; | |
| DBG(__func__) | |
| if (!options || !*options) | |
| return 0; | |
| while ((this_opt = strsep(&options, ",")) != NULL) { | |
| if (!*this_opt) continue; | |
| dprintk("matroxfb_setup: option %s\n", this_opt); | |
| if (!strncmp(this_opt, "dev:", 4)) | |
| dev = simple_strtoul(this_opt+4, NULL, 0); | |
| else if (!strncmp(this_opt, "depth:", 6)) { | |
| switch (simple_strtoul(this_opt+6, NULL, 0)) { | |
| case 0: depth = RSText; break; | |
| case 4: depth = RS4bpp; break; | |
| case 8: depth = RS8bpp; break; | |
| case 15:depth = RS15bpp; break; | |
| case 16:depth = RS16bpp; break; | |
| case 24:depth = RS24bpp; break; | |
| case 32:depth = RS32bpp; break; | |
| default: | |
| printk(KERN_ERR "matroxfb: unsupported color depth\n"); | |
| } | |
| } else if (!strncmp(this_opt, "xres:", 5)) | |
| xres = simple_strtoul(this_opt+5, NULL, 0); | |
| else if (!strncmp(this_opt, "yres:", 5)) | |
| yres = simple_strtoul(this_opt+5, NULL, 0); | |
| else if (!strncmp(this_opt, "vslen:", 6)) | |
| vslen = simple_strtoul(this_opt+6, NULL, 0); | |
| else if (!strncmp(this_opt, "hslen:", 6)) | |
| hslen = simple_strtoul(this_opt+6, NULL, 0); | |
| else if (!strncmp(this_opt, "left:", 5)) | |
| left = simple_strtoul(this_opt+5, NULL, 0); | |
| else if (!strncmp(this_opt, "right:", 6)) | |
| right = simple_strtoul(this_opt+6, NULL, 0); | |
| else if (!strncmp(this_opt, "upper:", 6)) | |
| upper = simple_strtoul(this_opt+6, NULL, 0); | |
| else if (!strncmp(this_opt, "lower:", 6)) | |
| lower = simple_strtoul(this_opt+6, NULL, 0); | |
| else if (!strncmp(this_opt, "pixclock:", 9)) | |
| pixclock = simple_strtoul(this_opt+9, NULL, 0); | |
| else if (!strncmp(this_opt, "sync:", 5)) | |
| sync = simple_strtoul(this_opt+5, NULL, 0); | |
| else if (!strncmp(this_opt, "vesa:", 5)) | |
| vesa = simple_strtoul(this_opt+5, NULL, 0); | |
| else if (!strncmp(this_opt, "maxclk:", 7)) | |
| maxclk = simple_strtoul(this_opt+7, NULL, 0); | |
| else if (!strncmp(this_opt, "fh:", 3)) | |
| fh = simple_strtoul(this_opt+3, NULL, 0); | |
| else if (!strncmp(this_opt, "fv:", 3)) | |
| fv = simple_strtoul(this_opt+3, NULL, 0); | |
| else if (!strncmp(this_opt, "mem:", 4)) | |
| mem = simple_strtoul(this_opt+4, NULL, 0); | |
| else if (!strncmp(this_opt, "mode:", 5)) | |
| strlcpy(videomode, this_opt+5, sizeof(videomode)); | |
| else if (!strncmp(this_opt, "outputs:", 8)) | |
| strlcpy(outputs, this_opt+8, sizeof(outputs)); | |
| else if (!strncmp(this_opt, "dfp:", 4)) { | |
| dfp_type = simple_strtoul(this_opt+4, NULL, 0); | |
| dfp = 1; | |
| } | |
| #ifdef CONFIG_PPC_PMAC | |
| else if (!strncmp(this_opt, "vmode:", 6)) { | |
| unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0); | |
| if (vmode > 0 && vmode <= VMODE_MAX) | |
| default_vmode = vmode; | |
| } else if (!strncmp(this_opt, "cmode:", 6)) { | |
| unsigned int cmode = simple_strtoul(this_opt+6, NULL, 0); | |
| switch (cmode) { | |
| case 0: | |
| case 8: | |
| default_cmode = CMODE_8; | |
| break; | |
| case 15: | |
| case 16: | |
| default_cmode = CMODE_16; | |
| break; | |
| case 24: | |
| case 32: | |
| default_cmode = CMODE_32; | |
| break; | |
| } | |
| } | |
| #endif | |
| else if (!strcmp(this_opt, "disabled")) /* nodisabled does not exist */ | |
| disabled = 1; | |
| else if (!strcmp(this_opt, "enabled")) /* noenabled does not exist */ | |
| disabled = 0; | |
| else if (!strcmp(this_opt, "sgram")) /* nosgram == sdram */ | |
| sgram = 1; | |
| else if (!strcmp(this_opt, "sdram")) | |
| sgram = 0; | |
| else if (!strncmp(this_opt, "memtype:", 8)) | |
| memtype = simple_strtoul(this_opt+8, NULL, 0); | |
| else { | |
| int value = 1; | |
| if (!strncmp(this_opt, "no", 2)) { | |
| value = 0; | |
| this_opt += 2; | |
| } | |
| if (! strcmp(this_opt, "inverse")) | |
| inverse = value; | |
| else if (!strcmp(this_opt, "accel")) | |
| noaccel = !value; | |
| else if (!strcmp(this_opt, "pan")) | |
| nopan = !value; | |
| else if (!strcmp(this_opt, "pciretry")) | |
| no_pci_retry = !value; | |
| else if (!strcmp(this_opt, "vga")) | |
| novga = !value; | |
| else if (!strcmp(this_opt, "bios")) | |
| nobios = !value; | |
| else if (!strcmp(this_opt, "init")) | |
| noinit = !value; | |
| #ifdef CONFIG_MTRR | |
| else if (!strcmp(this_opt, "mtrr")) | |
| mtrr = value; | |
| #endif | |
| else if (!strcmp(this_opt, "inv24")) | |
| inv24 = value; | |
| else if (!strcmp(this_opt, "cross4MB")) | |
| cross4MB = value; | |
| else if (!strcmp(this_opt, "grayscale")) | |
| grayscale = value; | |
| else if (!strcmp(this_opt, "dfp")) | |
| dfp = value; | |
| else { | |
| strlcpy(videomode, this_opt, sizeof(videomode)); | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static int __initdata initialized = 0; | |
| static int __init matroxfb_init(void) | |
| { | |
| char *option = NULL; | |
| int err = 0; | |
| DBG(__func__) | |
| if (fb_get_options("matroxfb", &option)) | |
| return -ENODEV; | |
| matroxfb_setup(option); | |
| if (disabled) | |
| return -ENXIO; | |
| if (!initialized) { | |
| initialized = 1; | |
| err = matrox_init(); | |
| } | |
| hotplug = 1; | |
| /* never return failure, user can hotplug matrox later... */ | |
| return err; | |
| } | |
| module_init(matroxfb_init); | |
| #else | |
| /* *************************** init module code **************************** */ | |
| MODULE_AUTHOR("(c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz>"); | |
| MODULE_DESCRIPTION("Accelerated FBDev driver for Matrox Millennium/Mystique/G100/G200/G400/G450/G550"); | |
| MODULE_LICENSE("GPL"); | |
| module_param(mem, int, 0); | |
| MODULE_PARM_DESC(mem, "Size of available memory in MB, KB or B (2,4,8,12,16MB, default=autodetect)"); | |
| module_param(disabled, int, 0); | |
| MODULE_PARM_DESC(disabled, "Disabled (0 or 1=disabled) (default=0)"); | |
| module_param(noaccel, int, 0); | |
| MODULE_PARM_DESC(noaccel, "Do not use accelerating engine (0 or 1=disabled) (default=0)"); | |
| module_param(nopan, int, 0); | |
| MODULE_PARM_DESC(nopan, "Disable pan on startup (0 or 1=disabled) (default=0)"); | |
| module_param(no_pci_retry, int, 0); | |
| MODULE_PARM_DESC(no_pci_retry, "PCI retries enabled (0 or 1=disabled) (default=0)"); | |
| module_param(novga, int, 0); | |
| MODULE_PARM_DESC(novga, "VGA I/O (0x3C0-0x3DF) disabled (0 or 1=disabled) (default=0)"); | |
| module_param(nobios, int, 0); | |
| MODULE_PARM_DESC(nobios, "Disables ROM BIOS (0 or 1=disabled) (default=do not change BIOS state)"); | |
| module_param(noinit, int, 0); | |
| MODULE_PARM_DESC(noinit, "Disables W/SG/SD-RAM and bus interface initialization (0 or 1=do not initialize) (default=0)"); | |
| module_param(memtype, int, 0); | |
| MODULE_PARM_DESC(memtype, "Memory type for G200/G400 (see Documentation/fb/matroxfb.txt for explanation) (default=3 for G200, 0 for G400)"); | |
| #ifdef CONFIG_MTRR | |
| module_param(mtrr, int, 0); | |
| MODULE_PARM_DESC(mtrr, "This speeds up video memory accesses (0=disabled or 1) (default=1)"); | |
| #endif | |
| module_param(sgram, int, 0); | |
| MODULE_PARM_DESC(sgram, "Indicates that G100/G200/G400 has SGRAM memory (0=SDRAM, 1=SGRAM) (default=0)"); | |
| module_param(inv24, int, 0); | |
| MODULE_PARM_DESC(inv24, "Inverts clock polarity for 24bpp and loop frequency > 100MHz (default=do not invert polarity)"); | |
| module_param(inverse, int, 0); | |
| MODULE_PARM_DESC(inverse, "Inverse (0 or 1) (default=0)"); | |
| module_param(dev, int, 0); | |
| MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=all working)"); | |
| module_param(vesa, int, 0); | |
| MODULE_PARM_DESC(vesa, "Startup videomode (0x000-0x1FF) (default=0x101)"); | |
| module_param(xres, int, 0); | |
| MODULE_PARM_DESC(xres, "Horizontal resolution (px), overrides xres from vesa (default=vesa)"); | |
| module_param(yres, int, 0); | |
| MODULE_PARM_DESC(yres, "Vertical resolution (scans), overrides yres from vesa (default=vesa)"); | |
| module_param(upper, int, 0); | |
| MODULE_PARM_DESC(upper, "Upper blank space (scans), overrides upper from vesa (default=vesa)"); | |
| module_param(lower, int, 0); | |
| MODULE_PARM_DESC(lower, "Lower blank space (scans), overrides lower from vesa (default=vesa)"); | |
| module_param(vslen, int, 0); | |
| MODULE_PARM_DESC(vslen, "Vertical sync length (scans), overrides lower from vesa (default=vesa)"); | |
| module_param(left, int, 0); | |
| MODULE_PARM_DESC(left, "Left blank space (px), overrides left from vesa (default=vesa)"); | |
| module_param(right, int, 0); | |
| MODULE_PARM_DESC(right, "Right blank space (px), overrides right from vesa (default=vesa)"); | |
| module_param(hslen, int, 0); | |
| MODULE_PARM_DESC(hslen, "Horizontal sync length (px), overrides hslen from vesa (default=vesa)"); | |
| module_param(pixclock, int, 0); | |
| MODULE_PARM_DESC(pixclock, "Pixelclock (ns), overrides pixclock from vesa (default=vesa)"); | |
| module_param(sync, int, 0); | |
| MODULE_PARM_DESC(sync, "Sync polarity, overrides sync from vesa (default=vesa)"); | |
| module_param(depth, int, 0); | |
| MODULE_PARM_DESC(depth, "Color depth (0=text,8,15,16,24,32) (default=vesa)"); | |
| module_param(maxclk, int, 0); | |
| MODULE_PARM_DESC(maxclk, "Startup maximal clock, 0-999MHz, 1000-999999kHz, 1000000-INF Hz"); | |
| module_param(fh, int, 0); | |
| MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz"); | |
| module_param(fv, int, 0); | |
| MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n" | |
| "You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\""); | |
| module_param(grayscale, int, 0); | |
| MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)"); | |
| module_param(cross4MB, int, 0); | |
| MODULE_PARM_DESC(cross4MB, "Specifies that 4MB boundary can be in middle of line. (default=autodetected)"); | |
| module_param(dfp, int, 0); | |
| MODULE_PARM_DESC(dfp, "Specifies whether to use digital flat panel interface of G200/G400 (0 or 1) (default=0)"); | |
| module_param(dfp_type, int, 0); | |
| MODULE_PARM_DESC(dfp_type, "Specifies DFP interface type (0 to 255) (default=read from hardware)"); | |
| module_param_string(outputs, outputs, sizeof(outputs), 0); | |
| MODULE_PARM_DESC(outputs, "Specifies which CRTC is mapped to which output (string of up to three letters, consisting of 0 (disabled), 1 (CRTC1), 2 (CRTC2)) (default=111 for Gx50, 101 for G200/G400 with DFP, and 100 for all other devices)"); | |
| #ifdef CONFIG_PPC_PMAC | |
| module_param_named(vmode, default_vmode, int, 0); | |
| MODULE_PARM_DESC(vmode, "Specify the vmode mode number that should be used (640x480 default)"); | |
| module_param_named(cmode, default_cmode, int, 0); | |
| MODULE_PARM_DESC(cmode, "Specify the video depth that should be used (8bit default)"); | |
| #endif | |
| int __init init_module(void){ | |
| DBG(__func__) | |
| if (disabled) | |
| return -ENXIO; | |
| if (depth == 0) | |
| depth = RSText; | |
| else if (depth == 4) | |
| depth = RS4bpp; | |
| else if (depth == 8) | |
| depth = RS8bpp; | |
| else if (depth == 15) | |
| depth = RS15bpp; | |
| else if (depth == 16) | |
| depth = RS16bpp; | |
| else if (depth == 24) | |
| depth = RS24bpp; | |
| else if (depth == 32) | |
| depth = RS32bpp; | |
| else if (depth != -1) { | |
| printk(KERN_ERR "matroxfb: depth %d is not supported, using default\n", depth); | |
| depth = -1; | |
| } | |
| matrox_init(); | |
| /* never return failure; user can hotplug matrox later... */ | |
| return 0; | |
| } | |
| #endif /* MODULE */ | |
| module_exit(matrox_done); | |
| EXPORT_SYMBOL(matroxfb_register_driver); | |
| EXPORT_SYMBOL(matroxfb_unregister_driver); | |
| EXPORT_SYMBOL(matroxfb_wait_for_sync); | |
| EXPORT_SYMBOL(matroxfb_enable_irq); | |
| /* | |
| * Overrides for Emacs so that we follow Linus's tabbing style. | |
| * --------------------------------------------------------------------------- | |
| * Local variables: | |
| * c-basic-offset: 8 | |
| * End: | |
| */ | |