| /* | 
 |  * raid5.c : Multiple Devices driver for Linux | 
 |  *	   Copyright (C) 1996, 1997 Ingo Molnar, Miguel de Icaza, Gadi Oxman | 
 |  *	   Copyright (C) 1999, 2000 Ingo Molnar | 
 |  * | 
 |  * RAID-5 management functions. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2, or (at your option) | 
 |  * any later version. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * (for example /usr/src/linux/COPYING); if not, write to the Free | 
 |  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 |  | 
 | #include <linux/config.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/raid/raid5.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/bitops.h> | 
 | #include <asm/atomic.h> | 
 |  | 
 | #include <linux/raid/bitmap.h> | 
 |  | 
 | /* | 
 |  * Stripe cache | 
 |  */ | 
 |  | 
 | #define NR_STRIPES		256 | 
 | #define STRIPE_SIZE		PAGE_SIZE | 
 | #define STRIPE_SHIFT		(PAGE_SHIFT - 9) | 
 | #define STRIPE_SECTORS		(STRIPE_SIZE>>9) | 
 | #define	IO_THRESHOLD		1 | 
 | #define NR_HASH			(PAGE_SIZE / sizeof(struct hlist_head)) | 
 | #define HASH_MASK		(NR_HASH - 1) | 
 |  | 
 | #define stripe_hash(conf, sect)	(&((conf)->stripe_hashtbl[((sect) >> STRIPE_SHIFT) & HASH_MASK])) | 
 |  | 
 | /* bio's attached to a stripe+device for I/O are linked together in bi_sector | 
 |  * order without overlap.  There may be several bio's per stripe+device, and | 
 |  * a bio could span several devices. | 
 |  * When walking this list for a particular stripe+device, we must never proceed | 
 |  * beyond a bio that extends past this device, as the next bio might no longer | 
 |  * be valid. | 
 |  * This macro is used to determine the 'next' bio in the list, given the sector | 
 |  * of the current stripe+device | 
 |  */ | 
 | #define r5_next_bio(bio, sect) ( ( (bio)->bi_sector + ((bio)->bi_size>>9) < sect + STRIPE_SECTORS) ? (bio)->bi_next : NULL) | 
 | /* | 
 |  * The following can be used to debug the driver | 
 |  */ | 
 | #define RAID5_DEBUG	0 | 
 | #define RAID5_PARANOIA	1 | 
 | #if RAID5_PARANOIA && defined(CONFIG_SMP) | 
 | # define CHECK_DEVLOCK() assert_spin_locked(&conf->device_lock) | 
 | #else | 
 | # define CHECK_DEVLOCK() | 
 | #endif | 
 |  | 
 | #define PRINTK(x...) ((void)(RAID5_DEBUG && printk(x))) | 
 | #if RAID5_DEBUG | 
 | #define inline | 
 | #define __inline__ | 
 | #endif | 
 |  | 
 | static void print_raid5_conf (raid5_conf_t *conf); | 
 |  | 
 | static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh) | 
 | { | 
 | 	if (atomic_dec_and_test(&sh->count)) { | 
 | 		if (!list_empty(&sh->lru)) | 
 | 			BUG(); | 
 | 		if (atomic_read(&conf->active_stripes)==0) | 
 | 			BUG(); | 
 | 		if (test_bit(STRIPE_HANDLE, &sh->state)) { | 
 | 			if (test_bit(STRIPE_DELAYED, &sh->state)) | 
 | 				list_add_tail(&sh->lru, &conf->delayed_list); | 
 | 			else if (test_bit(STRIPE_BIT_DELAY, &sh->state) && | 
 | 				 conf->seq_write == sh->bm_seq) | 
 | 				list_add_tail(&sh->lru, &conf->bitmap_list); | 
 | 			else { | 
 | 				clear_bit(STRIPE_BIT_DELAY, &sh->state); | 
 | 				list_add_tail(&sh->lru, &conf->handle_list); | 
 | 			} | 
 | 			md_wakeup_thread(conf->mddev->thread); | 
 | 		} else { | 
 | 			if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { | 
 | 				atomic_dec(&conf->preread_active_stripes); | 
 | 				if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) | 
 | 					md_wakeup_thread(conf->mddev->thread); | 
 | 			} | 
 | 			list_add_tail(&sh->lru, &conf->inactive_list); | 
 | 			atomic_dec(&conf->active_stripes); | 
 | 			if (!conf->inactive_blocked || | 
 | 			    atomic_read(&conf->active_stripes) < (conf->max_nr_stripes*3/4)) | 
 | 				wake_up(&conf->wait_for_stripe); | 
 | 		} | 
 | 	} | 
 | } | 
 | static void release_stripe(struct stripe_head *sh) | 
 | { | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	unsigned long flags; | 
 | 	 | 
 | 	spin_lock_irqsave(&conf->device_lock, flags); | 
 | 	__release_stripe(conf, sh); | 
 | 	spin_unlock_irqrestore(&conf->device_lock, flags); | 
 | } | 
 |  | 
 | static inline void remove_hash(struct stripe_head *sh) | 
 | { | 
 | 	PRINTK("remove_hash(), stripe %llu\n", (unsigned long long)sh->sector); | 
 |  | 
 | 	hlist_del_init(&sh->hash); | 
 | } | 
 |  | 
 | static void insert_hash(raid5_conf_t *conf, struct stripe_head *sh) | 
 | { | 
 | 	struct hlist_head *hp = stripe_hash(conf, sh->sector); | 
 |  | 
 | 	PRINTK("insert_hash(), stripe %llu\n", (unsigned long long)sh->sector); | 
 |  | 
 | 	CHECK_DEVLOCK(); | 
 | 	hlist_add_head(&sh->hash, hp); | 
 | } | 
 |  | 
 |  | 
 | /* find an idle stripe, make sure it is unhashed, and return it. */ | 
 | static struct stripe_head *get_free_stripe(raid5_conf_t *conf) | 
 | { | 
 | 	struct stripe_head *sh = NULL; | 
 | 	struct list_head *first; | 
 |  | 
 | 	CHECK_DEVLOCK(); | 
 | 	if (list_empty(&conf->inactive_list)) | 
 | 		goto out; | 
 | 	first = conf->inactive_list.next; | 
 | 	sh = list_entry(first, struct stripe_head, lru); | 
 | 	list_del_init(first); | 
 | 	remove_hash(sh); | 
 | 	atomic_inc(&conf->active_stripes); | 
 | out: | 
 | 	return sh; | 
 | } | 
 |  | 
 | static void shrink_buffers(struct stripe_head *sh, int num) | 
 | { | 
 | 	struct page *p; | 
 | 	int i; | 
 |  | 
 | 	for (i=0; i<num ; i++) { | 
 | 		p = sh->dev[i].page; | 
 | 		if (!p) | 
 | 			continue; | 
 | 		sh->dev[i].page = NULL; | 
 | 		put_page(p); | 
 | 	} | 
 | } | 
 |  | 
 | static int grow_buffers(struct stripe_head *sh, int num) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i=0; i<num; i++) { | 
 | 		struct page *page; | 
 |  | 
 | 		if (!(page = alloc_page(GFP_KERNEL))) { | 
 | 			return 1; | 
 | 		} | 
 | 		sh->dev[i].page = page; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void raid5_build_block (struct stripe_head *sh, int i); | 
 |  | 
 | static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx) | 
 | { | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int disks = conf->raid_disks, i; | 
 |  | 
 | 	if (atomic_read(&sh->count) != 0) | 
 | 		BUG(); | 
 | 	if (test_bit(STRIPE_HANDLE, &sh->state)) | 
 | 		BUG(); | 
 | 	 | 
 | 	CHECK_DEVLOCK(); | 
 | 	PRINTK("init_stripe called, stripe %llu\n",  | 
 | 		(unsigned long long)sh->sector); | 
 |  | 
 | 	remove_hash(sh); | 
 | 	 | 
 | 	sh->sector = sector; | 
 | 	sh->pd_idx = pd_idx; | 
 | 	sh->state = 0; | 
 |  | 
 | 	for (i=disks; i--; ) { | 
 | 		struct r5dev *dev = &sh->dev[i]; | 
 |  | 
 | 		if (dev->toread || dev->towrite || dev->written || | 
 | 		    test_bit(R5_LOCKED, &dev->flags)) { | 
 | 			printk("sector=%llx i=%d %p %p %p %d\n", | 
 | 			       (unsigned long long)sh->sector, i, dev->toread, | 
 | 			       dev->towrite, dev->written, | 
 | 			       test_bit(R5_LOCKED, &dev->flags)); | 
 | 			BUG(); | 
 | 		} | 
 | 		dev->flags = 0; | 
 | 		raid5_build_block(sh, i); | 
 | 	} | 
 | 	insert_hash(conf, sh); | 
 | } | 
 |  | 
 | static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector) | 
 | { | 
 | 	struct stripe_head *sh; | 
 | 	struct hlist_node *hn; | 
 |  | 
 | 	CHECK_DEVLOCK(); | 
 | 	PRINTK("__find_stripe, sector %llu\n", (unsigned long long)sector); | 
 | 	hlist_for_each_entry(sh, hn, stripe_hash(conf, sector), hash) | 
 | 		if (sh->sector == sector) | 
 | 			return sh; | 
 | 	PRINTK("__stripe %llu not in cache\n", (unsigned long long)sector); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void unplug_slaves(mddev_t *mddev); | 
 | static void raid5_unplug_device(request_queue_t *q); | 
 |  | 
 | static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector, | 
 | 					     int pd_idx, int noblock)  | 
 | { | 
 | 	struct stripe_head *sh; | 
 |  | 
 | 	PRINTK("get_stripe, sector %llu\n", (unsigned long long)sector); | 
 |  | 
 | 	spin_lock_irq(&conf->device_lock); | 
 |  | 
 | 	do { | 
 | 		wait_event_lock_irq(conf->wait_for_stripe, | 
 | 				    conf->quiesce == 0, | 
 | 				    conf->device_lock, /* nothing */); | 
 | 		sh = __find_stripe(conf, sector); | 
 | 		if (!sh) { | 
 | 			if (!conf->inactive_blocked) | 
 | 				sh = get_free_stripe(conf); | 
 | 			if (noblock && sh == NULL) | 
 | 				break; | 
 | 			if (!sh) { | 
 | 				conf->inactive_blocked = 1; | 
 | 				wait_event_lock_irq(conf->wait_for_stripe, | 
 | 						    !list_empty(&conf->inactive_list) && | 
 | 						    (atomic_read(&conf->active_stripes) | 
 | 						     < (conf->max_nr_stripes *3/4) | 
 | 						     || !conf->inactive_blocked), | 
 | 						    conf->device_lock, | 
 | 						    unplug_slaves(conf->mddev); | 
 | 					); | 
 | 				conf->inactive_blocked = 0; | 
 | 			} else | 
 | 				init_stripe(sh, sector, pd_idx); | 
 | 		} else { | 
 | 			if (atomic_read(&sh->count)) { | 
 | 				if (!list_empty(&sh->lru)) | 
 | 					BUG(); | 
 | 			} else { | 
 | 				if (!test_bit(STRIPE_HANDLE, &sh->state)) | 
 | 					atomic_inc(&conf->active_stripes); | 
 | 				if (list_empty(&sh->lru)) | 
 | 					BUG(); | 
 | 				list_del_init(&sh->lru); | 
 | 			} | 
 | 		} | 
 | 	} while (sh == NULL); | 
 |  | 
 | 	if (sh) | 
 | 		atomic_inc(&sh->count); | 
 |  | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | 	return sh; | 
 | } | 
 |  | 
 | static int grow_one_stripe(raid5_conf_t *conf) | 
 | { | 
 | 	struct stripe_head *sh; | 
 | 	sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL); | 
 | 	if (!sh) | 
 | 		return 0; | 
 | 	memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev)); | 
 | 	sh->raid_conf = conf; | 
 | 	spin_lock_init(&sh->lock); | 
 |  | 
 | 	if (grow_buffers(sh, conf->raid_disks)) { | 
 | 		shrink_buffers(sh, conf->raid_disks); | 
 | 		kmem_cache_free(conf->slab_cache, sh); | 
 | 		return 0; | 
 | 	} | 
 | 	/* we just created an active stripe so... */ | 
 | 	atomic_set(&sh->count, 1); | 
 | 	atomic_inc(&conf->active_stripes); | 
 | 	INIT_LIST_HEAD(&sh->lru); | 
 | 	release_stripe(sh); | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int grow_stripes(raid5_conf_t *conf, int num) | 
 | { | 
 | 	kmem_cache_t *sc; | 
 | 	int devs = conf->raid_disks; | 
 |  | 
 | 	sprintf(conf->cache_name, "raid5/%s", mdname(conf->mddev)); | 
 |  | 
 | 	sc = kmem_cache_create(conf->cache_name,  | 
 | 			       sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev), | 
 | 			       0, 0, NULL, NULL); | 
 | 	if (!sc) | 
 | 		return 1; | 
 | 	conf->slab_cache = sc; | 
 | 	while (num--) { | 
 | 		if (!grow_one_stripe(conf)) | 
 | 			return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int drop_one_stripe(raid5_conf_t *conf) | 
 | { | 
 | 	struct stripe_head *sh; | 
 |  | 
 | 	spin_lock_irq(&conf->device_lock); | 
 | 	sh = get_free_stripe(conf); | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | 	if (!sh) | 
 | 		return 0; | 
 | 	if (atomic_read(&sh->count)) | 
 | 		BUG(); | 
 | 	shrink_buffers(sh, conf->raid_disks); | 
 | 	kmem_cache_free(conf->slab_cache, sh); | 
 | 	atomic_dec(&conf->active_stripes); | 
 | 	return 1; | 
 | } | 
 |  | 
 | static void shrink_stripes(raid5_conf_t *conf) | 
 | { | 
 | 	while (drop_one_stripe(conf)) | 
 | 		; | 
 |  | 
 | 	kmem_cache_destroy(conf->slab_cache); | 
 | 	conf->slab_cache = NULL; | 
 | } | 
 |  | 
 | static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done, | 
 | 				   int error) | 
 | { | 
 |  	struct stripe_head *sh = bi->bi_private; | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int disks = conf->raid_disks, i; | 
 | 	int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags); | 
 |  | 
 | 	if (bi->bi_size) | 
 | 		return 1; | 
 |  | 
 | 	for (i=0 ; i<disks; i++) | 
 | 		if (bi == &sh->dev[i].req) | 
 | 			break; | 
 |  | 
 | 	PRINTK("end_read_request %llu/%d, count: %d, uptodate %d.\n",  | 
 | 		(unsigned long long)sh->sector, i, atomic_read(&sh->count),  | 
 | 		uptodate); | 
 | 	if (i == disks) { | 
 | 		BUG(); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (uptodate) { | 
 | #if 0 | 
 | 		struct bio *bio; | 
 | 		unsigned long flags; | 
 | 		spin_lock_irqsave(&conf->device_lock, flags); | 
 | 		/* we can return a buffer if we bypassed the cache or | 
 | 		 * if the top buffer is not in highmem.  If there are | 
 | 		 * multiple buffers, leave the extra work to | 
 | 		 * handle_stripe | 
 | 		 */ | 
 | 		buffer = sh->bh_read[i]; | 
 | 		if (buffer && | 
 | 		    (!PageHighMem(buffer->b_page) | 
 | 		     || buffer->b_page == bh->b_page ) | 
 | 			) { | 
 | 			sh->bh_read[i] = buffer->b_reqnext; | 
 | 			buffer->b_reqnext = NULL; | 
 | 		} else | 
 | 			buffer = NULL; | 
 | 		spin_unlock_irqrestore(&conf->device_lock, flags); | 
 | 		if (sh->bh_page[i]==bh->b_page) | 
 | 			set_buffer_uptodate(bh); | 
 | 		if (buffer) { | 
 | 			if (buffer->b_page != bh->b_page) | 
 | 				memcpy(buffer->b_data, bh->b_data, bh->b_size); | 
 | 			buffer->b_end_io(buffer, 1); | 
 | 		} | 
 | #else | 
 | 		set_bit(R5_UPTODATE, &sh->dev[i].flags); | 
 | #endif | 
 | 		if (test_bit(R5_ReadError, &sh->dev[i].flags)) { | 
 | 			printk(KERN_INFO "raid5: read error corrected!!\n"); | 
 | 			clear_bit(R5_ReadError, &sh->dev[i].flags); | 
 | 			clear_bit(R5_ReWrite, &sh->dev[i].flags); | 
 | 		} | 
 | 		if (atomic_read(&conf->disks[i].rdev->read_errors)) | 
 | 			atomic_set(&conf->disks[i].rdev->read_errors, 0); | 
 | 	} else { | 
 | 		int retry = 0; | 
 | 		clear_bit(R5_UPTODATE, &sh->dev[i].flags); | 
 | 		atomic_inc(&conf->disks[i].rdev->read_errors); | 
 | 		if (conf->mddev->degraded) | 
 | 			printk(KERN_WARNING "raid5: read error not correctable.\n"); | 
 | 		else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) | 
 | 			/* Oh, no!!! */ | 
 | 			printk(KERN_WARNING "raid5: read error NOT corrected!!\n"); | 
 | 		else if (atomic_read(&conf->disks[i].rdev->read_errors) | 
 | 			 > conf->max_nr_stripes) | 
 | 			printk(KERN_WARNING | 
 | 			       "raid5: Too many read errors, failing device.\n"); | 
 | 		else | 
 | 			retry = 1; | 
 | 		if (retry) | 
 | 			set_bit(R5_ReadError, &sh->dev[i].flags); | 
 | 		else { | 
 | 			clear_bit(R5_ReadError, &sh->dev[i].flags); | 
 | 			clear_bit(R5_ReWrite, &sh->dev[i].flags); | 
 | 			md_error(conf->mddev, conf->disks[i].rdev); | 
 | 		} | 
 | 	} | 
 | 	rdev_dec_pending(conf->disks[i].rdev, conf->mddev); | 
 | #if 0 | 
 | 	/* must restore b_page before unlocking buffer... */ | 
 | 	if (sh->bh_page[i] != bh->b_page) { | 
 | 		bh->b_page = sh->bh_page[i]; | 
 | 		bh->b_data = page_address(bh->b_page); | 
 | 		clear_buffer_uptodate(bh); | 
 | 	} | 
 | #endif | 
 | 	clear_bit(R5_LOCKED, &sh->dev[i].flags); | 
 | 	set_bit(STRIPE_HANDLE, &sh->state); | 
 | 	release_stripe(sh); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done, | 
 | 				    int error) | 
 | { | 
 |  	struct stripe_head *sh = bi->bi_private; | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int disks = conf->raid_disks, i; | 
 | 	unsigned long flags; | 
 | 	int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags); | 
 |  | 
 | 	if (bi->bi_size) | 
 | 		return 1; | 
 |  | 
 | 	for (i=0 ; i<disks; i++) | 
 | 		if (bi == &sh->dev[i].req) | 
 | 			break; | 
 |  | 
 | 	PRINTK("end_write_request %llu/%d, count %d, uptodate: %d.\n",  | 
 | 		(unsigned long long)sh->sector, i, atomic_read(&sh->count), | 
 | 		uptodate); | 
 | 	if (i == disks) { | 
 | 		BUG(); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&conf->device_lock, flags); | 
 | 	if (!uptodate) | 
 | 		md_error(conf->mddev, conf->disks[i].rdev); | 
 |  | 
 | 	rdev_dec_pending(conf->disks[i].rdev, conf->mddev); | 
 | 	 | 
 | 	clear_bit(R5_LOCKED, &sh->dev[i].flags); | 
 | 	set_bit(STRIPE_HANDLE, &sh->state); | 
 | 	__release_stripe(conf, sh); | 
 | 	spin_unlock_irqrestore(&conf->device_lock, flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static sector_t compute_blocknr(struct stripe_head *sh, int i); | 
 | 	 | 
 | static void raid5_build_block (struct stripe_head *sh, int i) | 
 | { | 
 | 	struct r5dev *dev = &sh->dev[i]; | 
 |  | 
 | 	bio_init(&dev->req); | 
 | 	dev->req.bi_io_vec = &dev->vec; | 
 | 	dev->req.bi_vcnt++; | 
 | 	dev->req.bi_max_vecs++; | 
 | 	dev->vec.bv_page = dev->page; | 
 | 	dev->vec.bv_len = STRIPE_SIZE; | 
 | 	dev->vec.bv_offset = 0; | 
 |  | 
 | 	dev->req.bi_sector = sh->sector; | 
 | 	dev->req.bi_private = sh; | 
 |  | 
 | 	dev->flags = 0; | 
 | 	if (i != sh->pd_idx) | 
 | 		dev->sector = compute_blocknr(sh, i); | 
 | } | 
 |  | 
 | static void error(mddev_t *mddev, mdk_rdev_t *rdev) | 
 | { | 
 | 	char b[BDEVNAME_SIZE]; | 
 | 	raid5_conf_t *conf = (raid5_conf_t *) mddev->private; | 
 | 	PRINTK("raid5: error called\n"); | 
 |  | 
 | 	if (!test_bit(Faulty, &rdev->flags)) { | 
 | 		mddev->sb_dirty = 1; | 
 | 		if (test_bit(In_sync, &rdev->flags)) { | 
 | 			conf->working_disks--; | 
 | 			mddev->degraded++; | 
 | 			conf->failed_disks++; | 
 | 			clear_bit(In_sync, &rdev->flags); | 
 | 			/* | 
 | 			 * if recovery was running, make sure it aborts. | 
 | 			 */ | 
 | 			set_bit(MD_RECOVERY_ERR, &mddev->recovery); | 
 | 		} | 
 | 		set_bit(Faulty, &rdev->flags); | 
 | 		printk (KERN_ALERT | 
 | 			"raid5: Disk failure on %s, disabling device." | 
 | 			" Operation continuing on %d devices\n", | 
 | 			bdevname(rdev->bdev,b), conf->working_disks); | 
 | 	} | 
 | }	 | 
 |  | 
 | /* | 
 |  * Input: a 'big' sector number, | 
 |  * Output: index of the data and parity disk, and the sector # in them. | 
 |  */ | 
 | static sector_t raid5_compute_sector(sector_t r_sector, unsigned int raid_disks, | 
 | 			unsigned int data_disks, unsigned int * dd_idx, | 
 | 			unsigned int * pd_idx, raid5_conf_t *conf) | 
 | { | 
 | 	long stripe; | 
 | 	unsigned long chunk_number; | 
 | 	unsigned int chunk_offset; | 
 | 	sector_t new_sector; | 
 | 	int sectors_per_chunk = conf->chunk_size >> 9; | 
 |  | 
 | 	/* First compute the information on this sector */ | 
 |  | 
 | 	/* | 
 | 	 * Compute the chunk number and the sector offset inside the chunk | 
 | 	 */ | 
 | 	chunk_offset = sector_div(r_sector, sectors_per_chunk); | 
 | 	chunk_number = r_sector; | 
 | 	BUG_ON(r_sector != chunk_number); | 
 |  | 
 | 	/* | 
 | 	 * Compute the stripe number | 
 | 	 */ | 
 | 	stripe = chunk_number / data_disks; | 
 |  | 
 | 	/* | 
 | 	 * Compute the data disk and parity disk indexes inside the stripe | 
 | 	 */ | 
 | 	*dd_idx = chunk_number % data_disks; | 
 |  | 
 | 	/* | 
 | 	 * Select the parity disk based on the user selected algorithm. | 
 | 	 */ | 
 | 	if (conf->level == 4) | 
 | 		*pd_idx = data_disks; | 
 | 	else switch (conf->algorithm) { | 
 | 		case ALGORITHM_LEFT_ASYMMETRIC: | 
 | 			*pd_idx = data_disks - stripe % raid_disks; | 
 | 			if (*dd_idx >= *pd_idx) | 
 | 				(*dd_idx)++; | 
 | 			break; | 
 | 		case ALGORITHM_RIGHT_ASYMMETRIC: | 
 | 			*pd_idx = stripe % raid_disks; | 
 | 			if (*dd_idx >= *pd_idx) | 
 | 				(*dd_idx)++; | 
 | 			break; | 
 | 		case ALGORITHM_LEFT_SYMMETRIC: | 
 | 			*pd_idx = data_disks - stripe % raid_disks; | 
 | 			*dd_idx = (*pd_idx + 1 + *dd_idx) % raid_disks; | 
 | 			break; | 
 | 		case ALGORITHM_RIGHT_SYMMETRIC: | 
 | 			*pd_idx = stripe % raid_disks; | 
 | 			*dd_idx = (*pd_idx + 1 + *dd_idx) % raid_disks; | 
 | 			break; | 
 | 		default: | 
 | 			printk(KERN_ERR "raid5: unsupported algorithm %d\n", | 
 | 				conf->algorithm); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Finally, compute the new sector number | 
 | 	 */ | 
 | 	new_sector = (sector_t)stripe * sectors_per_chunk + chunk_offset; | 
 | 	return new_sector; | 
 | } | 
 |  | 
 |  | 
 | static sector_t compute_blocknr(struct stripe_head *sh, int i) | 
 | { | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int raid_disks = conf->raid_disks, data_disks = raid_disks - 1; | 
 | 	sector_t new_sector = sh->sector, check; | 
 | 	int sectors_per_chunk = conf->chunk_size >> 9; | 
 | 	sector_t stripe; | 
 | 	int chunk_offset; | 
 | 	int chunk_number, dummy1, dummy2, dd_idx = i; | 
 | 	sector_t r_sector; | 
 |  | 
 | 	chunk_offset = sector_div(new_sector, sectors_per_chunk); | 
 | 	stripe = new_sector; | 
 | 	BUG_ON(new_sector != stripe); | 
 |  | 
 | 	 | 
 | 	switch (conf->algorithm) { | 
 | 		case ALGORITHM_LEFT_ASYMMETRIC: | 
 | 		case ALGORITHM_RIGHT_ASYMMETRIC: | 
 | 			if (i > sh->pd_idx) | 
 | 				i--; | 
 | 			break; | 
 | 		case ALGORITHM_LEFT_SYMMETRIC: | 
 | 		case ALGORITHM_RIGHT_SYMMETRIC: | 
 | 			if (i < sh->pd_idx) | 
 | 				i += raid_disks; | 
 | 			i -= (sh->pd_idx + 1); | 
 | 			break; | 
 | 		default: | 
 | 			printk(KERN_ERR "raid5: unsupported algorithm %d\n", | 
 | 				conf->algorithm); | 
 | 	} | 
 |  | 
 | 	chunk_number = stripe * data_disks + i; | 
 | 	r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset; | 
 |  | 
 | 	check = raid5_compute_sector (r_sector, raid_disks, data_disks, &dummy1, &dummy2, conf); | 
 | 	if (check != sh->sector || dummy1 != dd_idx || dummy2 != sh->pd_idx) { | 
 | 		printk(KERN_ERR "compute_blocknr: map not correct\n"); | 
 | 		return 0; | 
 | 	} | 
 | 	return r_sector; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* | 
 |  * Copy data between a page in the stripe cache, and a bio. | 
 |  * There are no alignment or size guarantees between the page or the | 
 |  * bio except that there is some overlap. | 
 |  * All iovecs in the bio must be considered. | 
 |  */ | 
 | static void copy_data(int frombio, struct bio *bio, | 
 | 		     struct page *page, | 
 | 		     sector_t sector) | 
 | { | 
 | 	char *pa = page_address(page); | 
 | 	struct bio_vec *bvl; | 
 | 	int i; | 
 | 	int page_offset; | 
 |  | 
 | 	if (bio->bi_sector >= sector) | 
 | 		page_offset = (signed)(bio->bi_sector - sector) * 512; | 
 | 	else | 
 | 		page_offset = (signed)(sector - bio->bi_sector) * -512; | 
 | 	bio_for_each_segment(bvl, bio, i) { | 
 | 		int len = bio_iovec_idx(bio,i)->bv_len; | 
 | 		int clen; | 
 | 		int b_offset = 0; | 
 |  | 
 | 		if (page_offset < 0) { | 
 | 			b_offset = -page_offset; | 
 | 			page_offset += b_offset; | 
 | 			len -= b_offset; | 
 | 		} | 
 |  | 
 | 		if (len > 0 && page_offset + len > STRIPE_SIZE) | 
 | 			clen = STRIPE_SIZE - page_offset; | 
 | 		else clen = len; | 
 | 			 | 
 | 		if (clen > 0) { | 
 | 			char *ba = __bio_kmap_atomic(bio, i, KM_USER0); | 
 | 			if (frombio) | 
 | 				memcpy(pa+page_offset, ba+b_offset, clen); | 
 | 			else | 
 | 				memcpy(ba+b_offset, pa+page_offset, clen); | 
 | 			__bio_kunmap_atomic(ba, KM_USER0); | 
 | 		} | 
 | 		if (clen < len) /* hit end of page */ | 
 | 			break; | 
 | 		page_offset +=  len; | 
 | 	} | 
 | } | 
 |  | 
 | #define check_xor() 	do { 						\ | 
 | 			   if (count == MAX_XOR_BLOCKS) {		\ | 
 | 				xor_block(count, STRIPE_SIZE, ptr);	\ | 
 | 				count = 1;				\ | 
 | 			   }						\ | 
 | 			} while(0) | 
 |  | 
 |  | 
 | static void compute_block(struct stripe_head *sh, int dd_idx) | 
 | { | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int i, count, disks = conf->raid_disks; | 
 | 	void *ptr[MAX_XOR_BLOCKS], *p; | 
 |  | 
 | 	PRINTK("compute_block, stripe %llu, idx %d\n",  | 
 | 		(unsigned long long)sh->sector, dd_idx); | 
 |  | 
 | 	ptr[0] = page_address(sh->dev[dd_idx].page); | 
 | 	memset(ptr[0], 0, STRIPE_SIZE); | 
 | 	count = 1; | 
 | 	for (i = disks ; i--; ) { | 
 | 		if (i == dd_idx) | 
 | 			continue; | 
 | 		p = page_address(sh->dev[i].page); | 
 | 		if (test_bit(R5_UPTODATE, &sh->dev[i].flags)) | 
 | 			ptr[count++] = p; | 
 | 		else | 
 | 			printk(KERN_ERR "compute_block() %d, stripe %llu, %d" | 
 | 				" not present\n", dd_idx, | 
 | 				(unsigned long long)sh->sector, i); | 
 |  | 
 | 		check_xor(); | 
 | 	} | 
 | 	if (count != 1) | 
 | 		xor_block(count, STRIPE_SIZE, ptr); | 
 | 	set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags); | 
 | } | 
 |  | 
 | static void compute_parity(struct stripe_head *sh, int method) | 
 | { | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int i, pd_idx = sh->pd_idx, disks = conf->raid_disks, count; | 
 | 	void *ptr[MAX_XOR_BLOCKS]; | 
 | 	struct bio *chosen; | 
 |  | 
 | 	PRINTK("compute_parity, stripe %llu, method %d\n", | 
 | 		(unsigned long long)sh->sector, method); | 
 |  | 
 | 	count = 1; | 
 | 	ptr[0] = page_address(sh->dev[pd_idx].page); | 
 | 	switch(method) { | 
 | 	case READ_MODIFY_WRITE: | 
 | 		if (!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags)) | 
 | 			BUG(); | 
 | 		for (i=disks ; i-- ;) { | 
 | 			if (i==pd_idx) | 
 | 				continue; | 
 | 			if (sh->dev[i].towrite && | 
 | 			    test_bit(R5_UPTODATE, &sh->dev[i].flags)) { | 
 | 				ptr[count++] = page_address(sh->dev[i].page); | 
 | 				chosen = sh->dev[i].towrite; | 
 | 				sh->dev[i].towrite = NULL; | 
 |  | 
 | 				if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) | 
 | 					wake_up(&conf->wait_for_overlap); | 
 |  | 
 | 				if (sh->dev[i].written) BUG(); | 
 | 				sh->dev[i].written = chosen; | 
 | 				check_xor(); | 
 | 			} | 
 | 		} | 
 | 		break; | 
 | 	case RECONSTRUCT_WRITE: | 
 | 		memset(ptr[0], 0, STRIPE_SIZE); | 
 | 		for (i= disks; i-- ;) | 
 | 			if (i!=pd_idx && sh->dev[i].towrite) { | 
 | 				chosen = sh->dev[i].towrite; | 
 | 				sh->dev[i].towrite = NULL; | 
 |  | 
 | 				if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) | 
 | 					wake_up(&conf->wait_for_overlap); | 
 |  | 
 | 				if (sh->dev[i].written) BUG(); | 
 | 				sh->dev[i].written = chosen; | 
 | 			} | 
 | 		break; | 
 | 	case CHECK_PARITY: | 
 | 		break; | 
 | 	} | 
 | 	if (count>1) { | 
 | 		xor_block(count, STRIPE_SIZE, ptr); | 
 | 		count = 1; | 
 | 	} | 
 | 	 | 
 | 	for (i = disks; i--;) | 
 | 		if (sh->dev[i].written) { | 
 | 			sector_t sector = sh->dev[i].sector; | 
 | 			struct bio *wbi = sh->dev[i].written; | 
 | 			while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) { | 
 | 				copy_data(1, wbi, sh->dev[i].page, sector); | 
 | 				wbi = r5_next_bio(wbi, sector); | 
 | 			} | 
 |  | 
 | 			set_bit(R5_LOCKED, &sh->dev[i].flags); | 
 | 			set_bit(R5_UPTODATE, &sh->dev[i].flags); | 
 | 		} | 
 |  | 
 | 	switch(method) { | 
 | 	case RECONSTRUCT_WRITE: | 
 | 	case CHECK_PARITY: | 
 | 		for (i=disks; i--;) | 
 | 			if (i != pd_idx) { | 
 | 				ptr[count++] = page_address(sh->dev[i].page); | 
 | 				check_xor(); | 
 | 			} | 
 | 		break; | 
 | 	case READ_MODIFY_WRITE: | 
 | 		for (i = disks; i--;) | 
 | 			if (sh->dev[i].written) { | 
 | 				ptr[count++] = page_address(sh->dev[i].page); | 
 | 				check_xor(); | 
 | 			} | 
 | 	} | 
 | 	if (count != 1) | 
 | 		xor_block(count, STRIPE_SIZE, ptr); | 
 | 	 | 
 | 	if (method != CHECK_PARITY) { | 
 | 		set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags); | 
 | 		set_bit(R5_LOCKED,   &sh->dev[pd_idx].flags); | 
 | 	} else | 
 | 		clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Each stripe/dev can have one or more bion attached. | 
 |  * toread/towrite point to the first in a chain.  | 
 |  * The bi_next chain must be in order. | 
 |  */ | 
 | static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, int forwrite) | 
 | { | 
 | 	struct bio **bip; | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int firstwrite=0; | 
 |  | 
 | 	PRINTK("adding bh b#%llu to stripe s#%llu\n", | 
 | 		(unsigned long long)bi->bi_sector, | 
 | 		(unsigned long long)sh->sector); | 
 |  | 
 |  | 
 | 	spin_lock(&sh->lock); | 
 | 	spin_lock_irq(&conf->device_lock); | 
 | 	if (forwrite) { | 
 | 		bip = &sh->dev[dd_idx].towrite; | 
 | 		if (*bip == NULL && sh->dev[dd_idx].written == NULL) | 
 | 			firstwrite = 1; | 
 | 	} else | 
 | 		bip = &sh->dev[dd_idx].toread; | 
 | 	while (*bip && (*bip)->bi_sector < bi->bi_sector) { | 
 | 		if ((*bip)->bi_sector + ((*bip)->bi_size >> 9) > bi->bi_sector) | 
 | 			goto overlap; | 
 | 		bip = & (*bip)->bi_next; | 
 | 	} | 
 | 	if (*bip && (*bip)->bi_sector < bi->bi_sector + ((bi->bi_size)>>9)) | 
 | 		goto overlap; | 
 |  | 
 | 	if (*bip && bi->bi_next && (*bip) != bi->bi_next) | 
 | 		BUG(); | 
 | 	if (*bip) | 
 | 		bi->bi_next = *bip; | 
 | 	*bip = bi; | 
 | 	bi->bi_phys_segments ++; | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | 	spin_unlock(&sh->lock); | 
 |  | 
 | 	PRINTK("added bi b#%llu to stripe s#%llu, disk %d.\n", | 
 | 		(unsigned long long)bi->bi_sector, | 
 | 		(unsigned long long)sh->sector, dd_idx); | 
 |  | 
 | 	if (conf->mddev->bitmap && firstwrite) { | 
 | 		sh->bm_seq = conf->seq_write; | 
 | 		bitmap_startwrite(conf->mddev->bitmap, sh->sector, | 
 | 				  STRIPE_SECTORS, 0); | 
 | 		set_bit(STRIPE_BIT_DELAY, &sh->state); | 
 | 	} | 
 |  | 
 | 	if (forwrite) { | 
 | 		/* check if page is covered */ | 
 | 		sector_t sector = sh->dev[dd_idx].sector; | 
 | 		for (bi=sh->dev[dd_idx].towrite; | 
 | 		     sector < sh->dev[dd_idx].sector + STRIPE_SECTORS && | 
 | 			     bi && bi->bi_sector <= sector; | 
 | 		     bi = r5_next_bio(bi, sh->dev[dd_idx].sector)) { | 
 | 			if (bi->bi_sector + (bi->bi_size>>9) >= sector) | 
 | 				sector = bi->bi_sector + (bi->bi_size>>9); | 
 | 		} | 
 | 		if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS) | 
 | 			set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags); | 
 | 	} | 
 | 	return 1; | 
 |  | 
 |  overlap: | 
 | 	set_bit(R5_Overlap, &sh->dev[dd_idx].flags); | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | 	spin_unlock(&sh->lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * handle_stripe - do things to a stripe. | 
 |  * | 
 |  * We lock the stripe and then examine the state of various bits | 
 |  * to see what needs to be done. | 
 |  * Possible results: | 
 |  *    return some read request which now have data | 
 |  *    return some write requests which are safely on disc | 
 |  *    schedule a read on some buffers | 
 |  *    schedule a write of some buffers | 
 |  *    return confirmation of parity correctness | 
 |  * | 
 |  * Parity calculations are done inside the stripe lock | 
 |  * buffers are taken off read_list or write_list, and bh_cache buffers | 
 |  * get BH_Lock set before the stripe lock is released. | 
 |  * | 
 |  */ | 
 |   | 
 | static void handle_stripe(struct stripe_head *sh) | 
 | { | 
 | 	raid5_conf_t *conf = sh->raid_conf; | 
 | 	int disks = conf->raid_disks; | 
 | 	struct bio *return_bi= NULL; | 
 | 	struct bio *bi; | 
 | 	int i; | 
 | 	int syncing; | 
 | 	int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0; | 
 | 	int non_overwrite = 0; | 
 | 	int failed_num=0; | 
 | 	struct r5dev *dev; | 
 |  | 
 | 	PRINTK("handling stripe %llu, cnt=%d, pd_idx=%d\n", | 
 | 		(unsigned long long)sh->sector, atomic_read(&sh->count), | 
 | 		sh->pd_idx); | 
 |  | 
 | 	spin_lock(&sh->lock); | 
 | 	clear_bit(STRIPE_HANDLE, &sh->state); | 
 | 	clear_bit(STRIPE_DELAYED, &sh->state); | 
 |  | 
 | 	syncing = test_bit(STRIPE_SYNCING, &sh->state); | 
 | 	/* Now to look around and see what can be done */ | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	for (i=disks; i--; ) { | 
 | 		mdk_rdev_t *rdev; | 
 | 		dev = &sh->dev[i]; | 
 | 		clear_bit(R5_Insync, &dev->flags); | 
 |  | 
 | 		PRINTK("check %d: state 0x%lx read %p write %p written %p\n", | 
 | 			i, dev->flags, dev->toread, dev->towrite, dev->written); | 
 | 		/* maybe we can reply to a read */ | 
 | 		if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) { | 
 | 			struct bio *rbi, *rbi2; | 
 | 			PRINTK("Return read for disc %d\n", i); | 
 | 			spin_lock_irq(&conf->device_lock); | 
 | 			rbi = dev->toread; | 
 | 			dev->toread = NULL; | 
 | 			if (test_and_clear_bit(R5_Overlap, &dev->flags)) | 
 | 				wake_up(&conf->wait_for_overlap); | 
 | 			spin_unlock_irq(&conf->device_lock); | 
 | 			while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) { | 
 | 				copy_data(0, rbi, dev->page, dev->sector); | 
 | 				rbi2 = r5_next_bio(rbi, dev->sector); | 
 | 				spin_lock_irq(&conf->device_lock); | 
 | 				if (--rbi->bi_phys_segments == 0) { | 
 | 					rbi->bi_next = return_bi; | 
 | 					return_bi = rbi; | 
 | 				} | 
 | 				spin_unlock_irq(&conf->device_lock); | 
 | 				rbi = rbi2; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* now count some things */ | 
 | 		if (test_bit(R5_LOCKED, &dev->flags)) locked++; | 
 | 		if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++; | 
 |  | 
 | 		 | 
 | 		if (dev->toread) to_read++; | 
 | 		if (dev->towrite) { | 
 | 			to_write++; | 
 | 			if (!test_bit(R5_OVERWRITE, &dev->flags)) | 
 | 				non_overwrite++; | 
 | 		} | 
 | 		if (dev->written) written++; | 
 | 		rdev = rcu_dereference(conf->disks[i].rdev); | 
 | 		if (!rdev || !test_bit(In_sync, &rdev->flags)) { | 
 | 			/* The ReadError flag will just be confusing now */ | 
 | 			clear_bit(R5_ReadError, &dev->flags); | 
 | 			clear_bit(R5_ReWrite, &dev->flags); | 
 | 		} | 
 | 		if (!rdev || !test_bit(In_sync, &rdev->flags) | 
 | 		    || test_bit(R5_ReadError, &dev->flags)) { | 
 | 			failed++; | 
 | 			failed_num = i; | 
 | 		} else | 
 | 			set_bit(R5_Insync, &dev->flags); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | 	PRINTK("locked=%d uptodate=%d to_read=%d" | 
 | 		" to_write=%d failed=%d failed_num=%d\n", | 
 | 		locked, uptodate, to_read, to_write, failed, failed_num); | 
 | 	/* check if the array has lost two devices and, if so, some requests might | 
 | 	 * need to be failed | 
 | 	 */ | 
 | 	if (failed > 1 && to_read+to_write+written) { | 
 | 		for (i=disks; i--; ) { | 
 | 			int bitmap_end = 0; | 
 |  | 
 | 			if (test_bit(R5_ReadError, &sh->dev[i].flags)) { | 
 | 				mdk_rdev_t *rdev; | 
 | 				rcu_read_lock(); | 
 | 				rdev = rcu_dereference(conf->disks[i].rdev); | 
 | 				if (rdev && test_bit(In_sync, &rdev->flags)) | 
 | 					/* multiple read failures in one stripe */ | 
 | 					md_error(conf->mddev, rdev); | 
 | 				rcu_read_unlock(); | 
 | 			} | 
 |  | 
 | 			spin_lock_irq(&conf->device_lock); | 
 | 			/* fail all writes first */ | 
 | 			bi = sh->dev[i].towrite; | 
 | 			sh->dev[i].towrite = NULL; | 
 | 			if (bi) { to_write--; bitmap_end = 1; } | 
 |  | 
 | 			if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) | 
 | 				wake_up(&conf->wait_for_overlap); | 
 |  | 
 | 			while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ | 
 | 				struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); | 
 | 				clear_bit(BIO_UPTODATE, &bi->bi_flags); | 
 | 				if (--bi->bi_phys_segments == 0) { | 
 | 					md_write_end(conf->mddev); | 
 | 					bi->bi_next = return_bi; | 
 | 					return_bi = bi; | 
 | 				} | 
 | 				bi = nextbi; | 
 | 			} | 
 | 			/* and fail all 'written' */ | 
 | 			bi = sh->dev[i].written; | 
 | 			sh->dev[i].written = NULL; | 
 | 			if (bi) bitmap_end = 1; | 
 | 			while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) { | 
 | 				struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); | 
 | 				clear_bit(BIO_UPTODATE, &bi->bi_flags); | 
 | 				if (--bi->bi_phys_segments == 0) { | 
 | 					md_write_end(conf->mddev); | 
 | 					bi->bi_next = return_bi; | 
 | 					return_bi = bi; | 
 | 				} | 
 | 				bi = bi2; | 
 | 			} | 
 |  | 
 | 			/* fail any reads if this device is non-operational */ | 
 | 			if (!test_bit(R5_Insync, &sh->dev[i].flags) || | 
 | 			    test_bit(R5_ReadError, &sh->dev[i].flags)) { | 
 | 				bi = sh->dev[i].toread; | 
 | 				sh->dev[i].toread = NULL; | 
 | 				if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) | 
 | 					wake_up(&conf->wait_for_overlap); | 
 | 				if (bi) to_read--; | 
 | 				while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ | 
 | 					struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); | 
 | 					clear_bit(BIO_UPTODATE, &bi->bi_flags); | 
 | 					if (--bi->bi_phys_segments == 0) { | 
 | 						bi->bi_next = return_bi; | 
 | 						return_bi = bi; | 
 | 					} | 
 | 					bi = nextbi; | 
 | 				} | 
 | 			} | 
 | 			spin_unlock_irq(&conf->device_lock); | 
 | 			if (bitmap_end) | 
 | 				bitmap_endwrite(conf->mddev->bitmap, sh->sector, | 
 | 						STRIPE_SECTORS, 0, 0); | 
 | 		} | 
 | 	} | 
 | 	if (failed > 1 && syncing) { | 
 | 		md_done_sync(conf->mddev, STRIPE_SECTORS,0); | 
 | 		clear_bit(STRIPE_SYNCING, &sh->state); | 
 | 		syncing = 0; | 
 | 	} | 
 |  | 
 | 	/* might be able to return some write requests if the parity block | 
 | 	 * is safe, or on a failed drive | 
 | 	 */ | 
 | 	dev = &sh->dev[sh->pd_idx]; | 
 | 	if ( written && | 
 | 	     ( (test_bit(R5_Insync, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) && | 
 | 		test_bit(R5_UPTODATE, &dev->flags)) | 
 | 	       || (failed == 1 && failed_num == sh->pd_idx)) | 
 | 	    ) { | 
 | 	    /* any written block on an uptodate or failed drive can be returned. | 
 | 	     * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but  | 
 | 	     * never LOCKED, so we don't need to test 'failed' directly. | 
 | 	     */ | 
 | 	    for (i=disks; i--; ) | 
 | 		if (sh->dev[i].written) { | 
 | 		    dev = &sh->dev[i]; | 
 | 		    if (!test_bit(R5_LOCKED, &dev->flags) && | 
 | 			 test_bit(R5_UPTODATE, &dev->flags) ) { | 
 | 			/* We can return any write requests */ | 
 | 			    struct bio *wbi, *wbi2; | 
 | 			    int bitmap_end = 0; | 
 | 			    PRINTK("Return write for disc %d\n", i); | 
 | 			    spin_lock_irq(&conf->device_lock); | 
 | 			    wbi = dev->written; | 
 | 			    dev->written = NULL; | 
 | 			    while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { | 
 | 				    wbi2 = r5_next_bio(wbi, dev->sector); | 
 | 				    if (--wbi->bi_phys_segments == 0) { | 
 | 					    md_write_end(conf->mddev); | 
 | 					    wbi->bi_next = return_bi; | 
 | 					    return_bi = wbi; | 
 | 				    } | 
 | 				    wbi = wbi2; | 
 | 			    } | 
 | 			    if (dev->towrite == NULL) | 
 | 				    bitmap_end = 1; | 
 | 			    spin_unlock_irq(&conf->device_lock); | 
 | 			    if (bitmap_end) | 
 | 				    bitmap_endwrite(conf->mddev->bitmap, sh->sector, | 
 | 						    STRIPE_SECTORS, | 
 | 						    !test_bit(STRIPE_DEGRADED, &sh->state), 0); | 
 | 		    } | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Now we might consider reading some blocks, either to check/generate | 
 | 	 * parity, or to satisfy requests | 
 | 	 * or to load a block that is being partially written. | 
 | 	 */ | 
 | 	if (to_read || non_overwrite || (syncing && (uptodate < disks))) { | 
 | 		for (i=disks; i--;) { | 
 | 			dev = &sh->dev[i]; | 
 | 			if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && | 
 | 			    (dev->toread || | 
 | 			     (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || | 
 | 			     syncing || | 
 | 			     (failed && (sh->dev[failed_num].toread || | 
 | 					 (sh->dev[failed_num].towrite && !test_bit(R5_OVERWRITE, &sh->dev[failed_num].flags)))) | 
 | 				    ) | 
 | 				) { | 
 | 				/* we would like to get this block, possibly | 
 | 				 * by computing it, but we might not be able to | 
 | 				 */ | 
 | 				if (uptodate == disks-1) { | 
 | 					PRINTK("Computing block %d\n", i); | 
 | 					compute_block(sh, i); | 
 | 					uptodate++; | 
 | 				} else if (test_bit(R5_Insync, &dev->flags)) { | 
 | 					set_bit(R5_LOCKED, &dev->flags); | 
 | 					set_bit(R5_Wantread, &dev->flags); | 
 | #if 0 | 
 | 					/* if I am just reading this block and we don't have | 
 | 					   a failed drive, or any pending writes then sidestep the cache */ | 
 | 					if (sh->bh_read[i] && !sh->bh_read[i]->b_reqnext && | 
 | 					    ! syncing && !failed && !to_write) { | 
 | 						sh->bh_cache[i]->b_page =  sh->bh_read[i]->b_page; | 
 | 						sh->bh_cache[i]->b_data =  sh->bh_read[i]->b_data; | 
 | 					} | 
 | #endif | 
 | 					locked++; | 
 | 					PRINTK("Reading block %d (sync=%d)\n",  | 
 | 						i, syncing); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 		set_bit(STRIPE_HANDLE, &sh->state); | 
 | 	} | 
 |  | 
 | 	/* now to consider writing and what else, if anything should be read */ | 
 | 	if (to_write) { | 
 | 		int rmw=0, rcw=0; | 
 | 		for (i=disks ; i--;) { | 
 | 			/* would I have to read this buffer for read_modify_write */ | 
 | 			dev = &sh->dev[i]; | 
 | 			if ((dev->towrite || i == sh->pd_idx) && | 
 | 			    (!test_bit(R5_LOCKED, &dev->flags)  | 
 | #if 0 | 
 | || sh->bh_page[i]!=bh->b_page | 
 | #endif | 
 | 				    ) && | 
 | 			    !test_bit(R5_UPTODATE, &dev->flags)) { | 
 | 				if (test_bit(R5_Insync, &dev->flags) | 
 | /*				    && !(!mddev->insync && i == sh->pd_idx) */ | 
 | 					) | 
 | 					rmw++; | 
 | 				else rmw += 2*disks;  /* cannot read it */ | 
 | 			} | 
 | 			/* Would I have to read this buffer for reconstruct_write */ | 
 | 			if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && | 
 | 			    (!test_bit(R5_LOCKED, &dev->flags)  | 
 | #if 0 | 
 | || sh->bh_page[i] != bh->b_page | 
 | #endif | 
 | 				    ) && | 
 | 			    !test_bit(R5_UPTODATE, &dev->flags)) { | 
 | 				if (test_bit(R5_Insync, &dev->flags)) rcw++; | 
 | 				else rcw += 2*disks; | 
 | 			} | 
 | 		} | 
 | 		PRINTK("for sector %llu, rmw=%d rcw=%d\n",  | 
 | 			(unsigned long long)sh->sector, rmw, rcw); | 
 | 		set_bit(STRIPE_HANDLE, &sh->state); | 
 | 		if (rmw < rcw && rmw > 0) | 
 | 			/* prefer read-modify-write, but need to get some data */ | 
 | 			for (i=disks; i--;) { | 
 | 				dev = &sh->dev[i]; | 
 | 				if ((dev->towrite || i == sh->pd_idx) && | 
 | 				    !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && | 
 | 				    test_bit(R5_Insync, &dev->flags)) { | 
 | 					if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) | 
 | 					{ | 
 | 						PRINTK("Read_old block %d for r-m-w\n", i); | 
 | 						set_bit(R5_LOCKED, &dev->flags); | 
 | 						set_bit(R5_Wantread, &dev->flags); | 
 | 						locked++; | 
 | 					} else { | 
 | 						set_bit(STRIPE_DELAYED, &sh->state); | 
 | 						set_bit(STRIPE_HANDLE, &sh->state); | 
 | 					} | 
 | 				} | 
 | 			} | 
 | 		if (rcw <= rmw && rcw > 0) | 
 | 			/* want reconstruct write, but need to get some data */ | 
 | 			for (i=disks; i--;) { | 
 | 				dev = &sh->dev[i]; | 
 | 				if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && | 
 | 				    !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && | 
 | 				    test_bit(R5_Insync, &dev->flags)) { | 
 | 					if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) | 
 | 					{ | 
 | 						PRINTK("Read_old block %d for Reconstruct\n", i); | 
 | 						set_bit(R5_LOCKED, &dev->flags); | 
 | 						set_bit(R5_Wantread, &dev->flags); | 
 | 						locked++; | 
 | 					} else { | 
 | 						set_bit(STRIPE_DELAYED, &sh->state); | 
 | 						set_bit(STRIPE_HANDLE, &sh->state); | 
 | 					} | 
 | 				} | 
 | 			} | 
 | 		/* now if nothing is locked, and if we have enough data, we can start a write request */ | 
 | 		if (locked == 0 && (rcw == 0 ||rmw == 0) && | 
 | 		    !test_bit(STRIPE_BIT_DELAY, &sh->state)) { | 
 | 			PRINTK("Computing parity...\n"); | 
 | 			compute_parity(sh, rcw==0 ? RECONSTRUCT_WRITE : READ_MODIFY_WRITE); | 
 | 			/* now every locked buffer is ready to be written */ | 
 | 			for (i=disks; i--;) | 
 | 				if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { | 
 | 					PRINTK("Writing block %d\n", i); | 
 | 					locked++; | 
 | 					set_bit(R5_Wantwrite, &sh->dev[i].flags); | 
 | 					if (!test_bit(R5_Insync, &sh->dev[i].flags) | 
 | 					    || (i==sh->pd_idx && failed == 0)) | 
 | 						set_bit(STRIPE_INSYNC, &sh->state); | 
 | 				} | 
 | 			if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { | 
 | 				atomic_dec(&conf->preread_active_stripes); | 
 | 				if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) | 
 | 					md_wakeup_thread(conf->mddev->thread); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* maybe we need to check and possibly fix the parity for this stripe | 
 | 	 * Any reads will already have been scheduled, so we just see if enough data | 
 | 	 * is available | 
 | 	 */ | 
 | 	if (syncing && locked == 0 && | 
 | 	    !test_bit(STRIPE_INSYNC, &sh->state)) { | 
 | 		set_bit(STRIPE_HANDLE, &sh->state); | 
 | 		if (failed == 0) { | 
 | 			char *pagea; | 
 | 			if (uptodate != disks) | 
 | 				BUG(); | 
 | 			compute_parity(sh, CHECK_PARITY); | 
 | 			uptodate--; | 
 | 			pagea = page_address(sh->dev[sh->pd_idx].page); | 
 | 			if ((*(u32*)pagea) == 0 && | 
 | 			    !memcmp(pagea, pagea+4, STRIPE_SIZE-4)) { | 
 | 				/* parity is correct (on disc, not in buffer any more) */ | 
 | 				set_bit(STRIPE_INSYNC, &sh->state); | 
 | 			} else { | 
 | 				conf->mddev->resync_mismatches += STRIPE_SECTORS; | 
 | 				if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) | 
 | 					/* don't try to repair!! */ | 
 | 					set_bit(STRIPE_INSYNC, &sh->state); | 
 | 				else { | 
 | 					compute_block(sh, sh->pd_idx); | 
 | 					uptodate++; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 		if (!test_bit(STRIPE_INSYNC, &sh->state)) { | 
 | 			/* either failed parity check, or recovery is happening */ | 
 | 			if (failed==0) | 
 | 				failed_num = sh->pd_idx; | 
 | 			dev = &sh->dev[failed_num]; | 
 | 			BUG_ON(!test_bit(R5_UPTODATE, &dev->flags)); | 
 | 			BUG_ON(uptodate != disks); | 
 |  | 
 | 			set_bit(R5_LOCKED, &dev->flags); | 
 | 			set_bit(R5_Wantwrite, &dev->flags); | 
 | 			clear_bit(STRIPE_DEGRADED, &sh->state); | 
 | 			locked++; | 
 | 			set_bit(STRIPE_INSYNC, &sh->state); | 
 | 		} | 
 | 	} | 
 | 	if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { | 
 | 		md_done_sync(conf->mddev, STRIPE_SECTORS,1); | 
 | 		clear_bit(STRIPE_SYNCING, &sh->state); | 
 | 	} | 
 |  | 
 | 	/* If the failed drive is just a ReadError, then we might need to progress | 
 | 	 * the repair/check process | 
 | 	 */ | 
 | 	if (failed == 1 && ! conf->mddev->ro && | 
 | 	    test_bit(R5_ReadError, &sh->dev[failed_num].flags) | 
 | 	    && !test_bit(R5_LOCKED, &sh->dev[failed_num].flags) | 
 | 	    && test_bit(R5_UPTODATE, &sh->dev[failed_num].flags) | 
 | 		) { | 
 | 		dev = &sh->dev[failed_num]; | 
 | 		if (!test_bit(R5_ReWrite, &dev->flags)) { | 
 | 			set_bit(R5_Wantwrite, &dev->flags); | 
 | 			set_bit(R5_ReWrite, &dev->flags); | 
 | 			set_bit(R5_LOCKED, &dev->flags); | 
 | 		} else { | 
 | 			/* let's read it back */ | 
 | 			set_bit(R5_Wantread, &dev->flags); | 
 | 			set_bit(R5_LOCKED, &dev->flags); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_unlock(&sh->lock); | 
 |  | 
 | 	while ((bi=return_bi)) { | 
 | 		int bytes = bi->bi_size; | 
 |  | 
 | 		return_bi = bi->bi_next; | 
 | 		bi->bi_next = NULL; | 
 | 		bi->bi_size = 0; | 
 | 		bi->bi_end_io(bi, bytes, 0); | 
 | 	} | 
 | 	for (i=disks; i-- ;) { | 
 | 		int rw; | 
 | 		struct bio *bi; | 
 | 		mdk_rdev_t *rdev; | 
 | 		if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) | 
 | 			rw = 1; | 
 | 		else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) | 
 | 			rw = 0; | 
 | 		else | 
 | 			continue; | 
 |   | 
 | 		bi = &sh->dev[i].req; | 
 |   | 
 | 		bi->bi_rw = rw; | 
 | 		if (rw) | 
 | 			bi->bi_end_io = raid5_end_write_request; | 
 | 		else | 
 | 			bi->bi_end_io = raid5_end_read_request; | 
 |   | 
 | 		rcu_read_lock(); | 
 | 		rdev = rcu_dereference(conf->disks[i].rdev); | 
 | 		if (rdev && test_bit(Faulty, &rdev->flags)) | 
 | 			rdev = NULL; | 
 | 		if (rdev) | 
 | 			atomic_inc(&rdev->nr_pending); | 
 | 		rcu_read_unlock(); | 
 |   | 
 | 		if (rdev) { | 
 | 			if (syncing) | 
 | 				md_sync_acct(rdev->bdev, STRIPE_SECTORS); | 
 |  | 
 | 			bi->bi_bdev = rdev->bdev; | 
 | 			PRINTK("for %llu schedule op %ld on disc %d\n", | 
 | 				(unsigned long long)sh->sector, bi->bi_rw, i); | 
 | 			atomic_inc(&sh->count); | 
 | 			bi->bi_sector = sh->sector + rdev->data_offset; | 
 | 			bi->bi_flags = 1 << BIO_UPTODATE; | 
 | 			bi->bi_vcnt = 1;	 | 
 | 			bi->bi_max_vecs = 1; | 
 | 			bi->bi_idx = 0; | 
 | 			bi->bi_io_vec = &sh->dev[i].vec; | 
 | 			bi->bi_io_vec[0].bv_len = STRIPE_SIZE; | 
 | 			bi->bi_io_vec[0].bv_offset = 0; | 
 | 			bi->bi_size = STRIPE_SIZE; | 
 | 			bi->bi_next = NULL; | 
 | 			if (rw == WRITE && | 
 | 			    test_bit(R5_ReWrite, &sh->dev[i].flags)) | 
 | 				atomic_add(STRIPE_SECTORS, &rdev->corrected_errors); | 
 | 			generic_make_request(bi); | 
 | 		} else { | 
 | 			if (rw == 1) | 
 | 				set_bit(STRIPE_DEGRADED, &sh->state); | 
 | 			PRINTK("skip op %ld on disc %d for sector %llu\n", | 
 | 				bi->bi_rw, i, (unsigned long long)sh->sector); | 
 | 			clear_bit(R5_LOCKED, &sh->dev[i].flags); | 
 | 			set_bit(STRIPE_HANDLE, &sh->state); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void raid5_activate_delayed(raid5_conf_t *conf) | 
 | { | 
 | 	if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) { | 
 | 		while (!list_empty(&conf->delayed_list)) { | 
 | 			struct list_head *l = conf->delayed_list.next; | 
 | 			struct stripe_head *sh; | 
 | 			sh = list_entry(l, struct stripe_head, lru); | 
 | 			list_del_init(l); | 
 | 			clear_bit(STRIPE_DELAYED, &sh->state); | 
 | 			if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) | 
 | 				atomic_inc(&conf->preread_active_stripes); | 
 | 			list_add_tail(&sh->lru, &conf->handle_list); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void activate_bit_delay(raid5_conf_t *conf) | 
 | { | 
 | 	/* device_lock is held */ | 
 | 	struct list_head head; | 
 | 	list_add(&head, &conf->bitmap_list); | 
 | 	list_del_init(&conf->bitmap_list); | 
 | 	while (!list_empty(&head)) { | 
 | 		struct stripe_head *sh = list_entry(head.next, struct stripe_head, lru); | 
 | 		list_del_init(&sh->lru); | 
 | 		atomic_inc(&sh->count); | 
 | 		__release_stripe(conf, sh); | 
 | 	} | 
 | } | 
 |  | 
 | static void unplug_slaves(mddev_t *mddev) | 
 | { | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	int i; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	for (i=0; i<mddev->raid_disks; i++) { | 
 | 		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev); | 
 | 		if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) { | 
 | 			request_queue_t *r_queue = bdev_get_queue(rdev->bdev); | 
 |  | 
 | 			atomic_inc(&rdev->nr_pending); | 
 | 			rcu_read_unlock(); | 
 |  | 
 | 			if (r_queue->unplug_fn) | 
 | 				r_queue->unplug_fn(r_queue); | 
 |  | 
 | 			rdev_dec_pending(rdev, mddev); | 
 | 			rcu_read_lock(); | 
 | 		} | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | } | 
 |  | 
 | static void raid5_unplug_device(request_queue_t *q) | 
 | { | 
 | 	mddev_t *mddev = q->queuedata; | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&conf->device_lock, flags); | 
 |  | 
 | 	if (blk_remove_plug(q)) { | 
 | 		conf->seq_flush++; | 
 | 		raid5_activate_delayed(conf); | 
 | 	} | 
 | 	md_wakeup_thread(mddev->thread); | 
 |  | 
 | 	spin_unlock_irqrestore(&conf->device_lock, flags); | 
 |  | 
 | 	unplug_slaves(mddev); | 
 | } | 
 |  | 
 | static int raid5_issue_flush(request_queue_t *q, struct gendisk *disk, | 
 | 			     sector_t *error_sector) | 
 | { | 
 | 	mddev_t *mddev = q->queuedata; | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	int i, ret = 0; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	for (i=0; i<mddev->raid_disks && ret == 0; i++) { | 
 | 		mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev); | 
 | 		if (rdev && !test_bit(Faulty, &rdev->flags)) { | 
 | 			struct block_device *bdev = rdev->bdev; | 
 | 			request_queue_t *r_queue = bdev_get_queue(bdev); | 
 |  | 
 | 			if (!r_queue->issue_flush_fn) | 
 | 				ret = -EOPNOTSUPP; | 
 | 			else { | 
 | 				atomic_inc(&rdev->nr_pending); | 
 | 				rcu_read_unlock(); | 
 | 				ret = r_queue->issue_flush_fn(r_queue, bdev->bd_disk, | 
 | 							      error_sector); | 
 | 				rdev_dec_pending(rdev, mddev); | 
 | 				rcu_read_lock(); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline void raid5_plug_device(raid5_conf_t *conf) | 
 | { | 
 | 	spin_lock_irq(&conf->device_lock); | 
 | 	blk_plug_device(conf->mddev->queue); | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | } | 
 |  | 
 | static int make_request (request_queue_t *q, struct bio * bi) | 
 | { | 
 | 	mddev_t *mddev = q->queuedata; | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	const unsigned int raid_disks = conf->raid_disks; | 
 | 	const unsigned int data_disks = raid_disks - 1; | 
 | 	unsigned int dd_idx, pd_idx; | 
 | 	sector_t new_sector; | 
 | 	sector_t logical_sector, last_sector; | 
 | 	struct stripe_head *sh; | 
 | 	const int rw = bio_data_dir(bi); | 
 |  | 
 | 	if (unlikely(bio_barrier(bi))) { | 
 | 		bio_endio(bi, bi->bi_size, -EOPNOTSUPP); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	md_write_start(mddev, bi); | 
 |  | 
 | 	disk_stat_inc(mddev->gendisk, ios[rw]); | 
 | 	disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bi)); | 
 |  | 
 | 	logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1); | 
 | 	last_sector = bi->bi_sector + (bi->bi_size>>9); | 
 | 	bi->bi_next = NULL; | 
 | 	bi->bi_phys_segments = 1;	/* over-loaded to count active stripes */ | 
 |  | 
 | 	for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) { | 
 | 		DEFINE_WAIT(w); | 
 | 		 | 
 | 		new_sector = raid5_compute_sector(logical_sector, | 
 | 						  raid_disks, data_disks, &dd_idx, &pd_idx, conf); | 
 |  | 
 | 		PRINTK("raid5: make_request, sector %llu logical %llu\n", | 
 | 			(unsigned long long)new_sector,  | 
 | 			(unsigned long long)logical_sector); | 
 |  | 
 | 	retry: | 
 | 		prepare_to_wait(&conf->wait_for_overlap, &w, TASK_UNINTERRUPTIBLE); | 
 | 		sh = get_active_stripe(conf, new_sector, pd_idx, (bi->bi_rw&RWA_MASK)); | 
 | 		if (sh) { | 
 | 			if (!add_stripe_bio(sh, bi, dd_idx, (bi->bi_rw&RW_MASK))) { | 
 | 				/* Add failed due to overlap.  Flush everything | 
 | 				 * and wait a while | 
 | 				 */ | 
 | 				raid5_unplug_device(mddev->queue); | 
 | 				release_stripe(sh); | 
 | 				schedule(); | 
 | 				goto retry; | 
 | 			} | 
 | 			finish_wait(&conf->wait_for_overlap, &w); | 
 | 			raid5_plug_device(conf); | 
 | 			handle_stripe(sh); | 
 | 			release_stripe(sh); | 
 |  | 
 | 		} else { | 
 | 			/* cannot get stripe for read-ahead, just give-up */ | 
 | 			clear_bit(BIO_UPTODATE, &bi->bi_flags); | 
 | 			finish_wait(&conf->wait_for_overlap, &w); | 
 | 			break; | 
 | 		} | 
 | 			 | 
 | 	} | 
 | 	spin_lock_irq(&conf->device_lock); | 
 | 	if (--bi->bi_phys_segments == 0) { | 
 | 		int bytes = bi->bi_size; | 
 |  | 
 | 		if ( bio_data_dir(bi) == WRITE ) | 
 | 			md_write_end(mddev); | 
 | 		bi->bi_size = 0; | 
 | 		bi->bi_end_io(bi, bytes, 0); | 
 | 	} | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* FIXME go_faster isn't used */ | 
 | static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster) | 
 | { | 
 | 	raid5_conf_t *conf = (raid5_conf_t *) mddev->private; | 
 | 	struct stripe_head *sh; | 
 | 	int sectors_per_chunk = conf->chunk_size >> 9; | 
 | 	sector_t x; | 
 | 	unsigned long stripe; | 
 | 	int chunk_offset; | 
 | 	int dd_idx, pd_idx; | 
 | 	sector_t first_sector; | 
 | 	int raid_disks = conf->raid_disks; | 
 | 	int data_disks = raid_disks-1; | 
 | 	sector_t max_sector = mddev->size << 1; | 
 | 	int sync_blocks; | 
 |  | 
 | 	if (sector_nr >= max_sector) { | 
 | 		/* just being told to finish up .. nothing much to do */ | 
 | 		unplug_slaves(mddev); | 
 |  | 
 | 		if (mddev->curr_resync < max_sector) /* aborted */ | 
 | 			bitmap_end_sync(mddev->bitmap, mddev->curr_resync, | 
 | 					&sync_blocks, 1); | 
 | 		else /* compelted sync */ | 
 | 			conf->fullsync = 0; | 
 | 		bitmap_close_sync(mddev->bitmap); | 
 |  | 
 | 		return 0; | 
 | 	} | 
 | 	/* if there is 1 or more failed drives and we are trying | 
 | 	 * to resync, then assert that we are finished, because there is | 
 | 	 * nothing we can do. | 
 | 	 */ | 
 | 	if (mddev->degraded >= 1 && test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { | 
 | 		sector_t rv = (mddev->size << 1) - sector_nr; | 
 | 		*skipped = 1; | 
 | 		return rv; | 
 | 	} | 
 | 	if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) && | 
 | 	    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) && | 
 | 	    !conf->fullsync && sync_blocks >= STRIPE_SECTORS) { | 
 | 		/* we can skip this block, and probably more */ | 
 | 		sync_blocks /= STRIPE_SECTORS; | 
 | 		*skipped = 1; | 
 | 		return sync_blocks * STRIPE_SECTORS; /* keep things rounded to whole stripes */ | 
 | 	} | 
 |  | 
 | 	x = sector_nr; | 
 | 	chunk_offset = sector_div(x, sectors_per_chunk); | 
 | 	stripe = x; | 
 | 	BUG_ON(x != stripe); | 
 |  | 
 | 	first_sector = raid5_compute_sector((sector_t)stripe*data_disks*sectors_per_chunk | 
 | 		+ chunk_offset, raid_disks, data_disks, &dd_idx, &pd_idx, conf); | 
 | 	sh = get_active_stripe(conf, sector_nr, pd_idx, 1); | 
 | 	if (sh == NULL) { | 
 | 		sh = get_active_stripe(conf, sector_nr, pd_idx, 0); | 
 | 		/* make sure we don't swamp the stripe cache if someone else | 
 | 		 * is trying to get access  | 
 | 		 */ | 
 | 		schedule_timeout_uninterruptible(1); | 
 | 	} | 
 | 	bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 0); | 
 | 	spin_lock(&sh->lock);	 | 
 | 	set_bit(STRIPE_SYNCING, &sh->state); | 
 | 	clear_bit(STRIPE_INSYNC, &sh->state); | 
 | 	spin_unlock(&sh->lock); | 
 |  | 
 | 	handle_stripe(sh); | 
 | 	release_stripe(sh); | 
 |  | 
 | 	return STRIPE_SECTORS; | 
 | } | 
 |  | 
 | /* | 
 |  * This is our raid5 kernel thread. | 
 |  * | 
 |  * We scan the hash table for stripes which can be handled now. | 
 |  * During the scan, completed stripes are saved for us by the interrupt | 
 |  * handler, so that they will not have to wait for our next wakeup. | 
 |  */ | 
 | static void raid5d (mddev_t *mddev) | 
 | { | 
 | 	struct stripe_head *sh; | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	int handled; | 
 |  | 
 | 	PRINTK("+++ raid5d active\n"); | 
 |  | 
 | 	md_check_recovery(mddev); | 
 |  | 
 | 	handled = 0; | 
 | 	spin_lock_irq(&conf->device_lock); | 
 | 	while (1) { | 
 | 		struct list_head *first; | 
 |  | 
 | 		if (conf->seq_flush - conf->seq_write > 0) { | 
 | 			int seq = conf->seq_flush; | 
 | 			spin_unlock_irq(&conf->device_lock); | 
 | 			bitmap_unplug(mddev->bitmap); | 
 | 			spin_lock_irq(&conf->device_lock); | 
 | 			conf->seq_write = seq; | 
 | 			activate_bit_delay(conf); | 
 | 		} | 
 |  | 
 | 		if (list_empty(&conf->handle_list) && | 
 | 		    atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD && | 
 | 		    !blk_queue_plugged(mddev->queue) && | 
 | 		    !list_empty(&conf->delayed_list)) | 
 | 			raid5_activate_delayed(conf); | 
 |  | 
 | 		if (list_empty(&conf->handle_list)) | 
 | 			break; | 
 |  | 
 | 		first = conf->handle_list.next; | 
 | 		sh = list_entry(first, struct stripe_head, lru); | 
 |  | 
 | 		list_del_init(first); | 
 | 		atomic_inc(&sh->count); | 
 | 		if (atomic_read(&sh->count)!= 1) | 
 | 			BUG(); | 
 | 		spin_unlock_irq(&conf->device_lock); | 
 | 		 | 
 | 		handled++; | 
 | 		handle_stripe(sh); | 
 | 		release_stripe(sh); | 
 |  | 
 | 		spin_lock_irq(&conf->device_lock); | 
 | 	} | 
 | 	PRINTK("%d stripes handled\n", handled); | 
 |  | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 |  | 
 | 	unplug_slaves(mddev); | 
 |  | 
 | 	PRINTK("--- raid5d inactive\n"); | 
 | } | 
 |  | 
 | static ssize_t | 
 | raid5_show_stripe_cache_size(mddev_t *mddev, char *page) | 
 | { | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	if (conf) | 
 | 		return sprintf(page, "%d\n", conf->max_nr_stripes); | 
 | 	else | 
 | 		return 0; | 
 | } | 
 |  | 
 | static ssize_t | 
 | raid5_store_stripe_cache_size(mddev_t *mddev, const char *page, size_t len) | 
 | { | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	char *end; | 
 | 	int new; | 
 | 	if (len >= PAGE_SIZE) | 
 | 		return -EINVAL; | 
 | 	if (!conf) | 
 | 		return -ENODEV; | 
 |  | 
 | 	new = simple_strtoul(page, &end, 10); | 
 | 	if (!*page || (*end && *end != '\n') ) | 
 | 		return -EINVAL; | 
 | 	if (new <= 16 || new > 32768) | 
 | 		return -EINVAL; | 
 | 	while (new < conf->max_nr_stripes) { | 
 | 		if (drop_one_stripe(conf)) | 
 | 			conf->max_nr_stripes--; | 
 | 		else | 
 | 			break; | 
 | 	} | 
 | 	while (new > conf->max_nr_stripes) { | 
 | 		if (grow_one_stripe(conf)) | 
 | 			conf->max_nr_stripes++; | 
 | 		else break; | 
 | 	} | 
 | 	return len; | 
 | } | 
 |  | 
 | static struct md_sysfs_entry | 
 | raid5_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR, | 
 | 				raid5_show_stripe_cache_size, | 
 | 				raid5_store_stripe_cache_size); | 
 |  | 
 | static ssize_t | 
 | stripe_cache_active_show(mddev_t *mddev, char *page) | 
 | { | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 | 	if (conf) | 
 | 		return sprintf(page, "%d\n", atomic_read(&conf->active_stripes)); | 
 | 	else | 
 | 		return 0; | 
 | } | 
 |  | 
 | static struct md_sysfs_entry | 
 | raid5_stripecache_active = __ATTR_RO(stripe_cache_active); | 
 |  | 
 | static struct attribute *raid5_attrs[] =  { | 
 | 	&raid5_stripecache_size.attr, | 
 | 	&raid5_stripecache_active.attr, | 
 | 	NULL, | 
 | }; | 
 | static struct attribute_group raid5_attrs_group = { | 
 | 	.name = NULL, | 
 | 	.attrs = raid5_attrs, | 
 | }; | 
 |  | 
 | static int run(mddev_t *mddev) | 
 | { | 
 | 	raid5_conf_t *conf; | 
 | 	int raid_disk, memory; | 
 | 	mdk_rdev_t *rdev; | 
 | 	struct disk_info *disk; | 
 | 	struct list_head *tmp; | 
 |  | 
 | 	if (mddev->level != 5 && mddev->level != 4) { | 
 | 		printk(KERN_ERR "raid5: %s: raid level not set to 4/5 (%d)\n", | 
 | 		       mdname(mddev), mddev->level); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	mddev->private = kzalloc(sizeof (raid5_conf_t) | 
 | 				 + mddev->raid_disks * sizeof(struct disk_info), | 
 | 				 GFP_KERNEL); | 
 | 	if ((conf = mddev->private) == NULL) | 
 | 		goto abort; | 
 |  | 
 | 	conf->mddev = mddev; | 
 |  | 
 | 	if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL) | 
 | 		goto abort; | 
 |  | 
 | 	spin_lock_init(&conf->device_lock); | 
 | 	init_waitqueue_head(&conf->wait_for_stripe); | 
 | 	init_waitqueue_head(&conf->wait_for_overlap); | 
 | 	INIT_LIST_HEAD(&conf->handle_list); | 
 | 	INIT_LIST_HEAD(&conf->delayed_list); | 
 | 	INIT_LIST_HEAD(&conf->bitmap_list); | 
 | 	INIT_LIST_HEAD(&conf->inactive_list); | 
 | 	atomic_set(&conf->active_stripes, 0); | 
 | 	atomic_set(&conf->preread_active_stripes, 0); | 
 |  | 
 | 	PRINTK("raid5: run(%s) called.\n", mdname(mddev)); | 
 |  | 
 | 	ITERATE_RDEV(mddev,rdev,tmp) { | 
 | 		raid_disk = rdev->raid_disk; | 
 | 		if (raid_disk >= mddev->raid_disks | 
 | 		    || raid_disk < 0) | 
 | 			continue; | 
 | 		disk = conf->disks + raid_disk; | 
 |  | 
 | 		disk->rdev = rdev; | 
 |  | 
 | 		if (test_bit(In_sync, &rdev->flags)) { | 
 | 			char b[BDEVNAME_SIZE]; | 
 | 			printk(KERN_INFO "raid5: device %s operational as raid" | 
 | 				" disk %d\n", bdevname(rdev->bdev,b), | 
 | 				raid_disk); | 
 | 			conf->working_disks++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	conf->raid_disks = mddev->raid_disks; | 
 | 	/* | 
 | 	 * 0 for a fully functional array, 1 for a degraded array. | 
 | 	 */ | 
 | 	mddev->degraded = conf->failed_disks = conf->raid_disks - conf->working_disks; | 
 | 	conf->mddev = mddev; | 
 | 	conf->chunk_size = mddev->chunk_size; | 
 | 	conf->level = mddev->level; | 
 | 	conf->algorithm = mddev->layout; | 
 | 	conf->max_nr_stripes = NR_STRIPES; | 
 |  | 
 | 	/* device size must be a multiple of chunk size */ | 
 | 	mddev->size &= ~(mddev->chunk_size/1024 -1); | 
 | 	mddev->resync_max_sectors = mddev->size << 1; | 
 |  | 
 | 	if (!conf->chunk_size || conf->chunk_size % 4) { | 
 | 		printk(KERN_ERR "raid5: invalid chunk size %d for %s\n", | 
 | 			conf->chunk_size, mdname(mddev)); | 
 | 		goto abort; | 
 | 	} | 
 | 	if (conf->algorithm > ALGORITHM_RIGHT_SYMMETRIC) { | 
 | 		printk(KERN_ERR  | 
 | 			"raid5: unsupported parity algorithm %d for %s\n", | 
 | 			conf->algorithm, mdname(mddev)); | 
 | 		goto abort; | 
 | 	} | 
 | 	if (mddev->degraded > 1) { | 
 | 		printk(KERN_ERR "raid5: not enough operational devices for %s" | 
 | 			" (%d/%d failed)\n", | 
 | 			mdname(mddev), conf->failed_disks, conf->raid_disks); | 
 | 		goto abort; | 
 | 	} | 
 |  | 
 | 	if (mddev->degraded == 1 && | 
 | 	    mddev->recovery_cp != MaxSector) { | 
 | 		if (mddev->ok_start_degraded) | 
 | 			printk(KERN_WARNING | 
 | 			       "raid5: starting dirty degraded array: %s" | 
 | 			       "- data corruption possible.\n", | 
 | 			       mdname(mddev)); | 
 | 		else { | 
 | 			printk(KERN_ERR | 
 | 			       "raid5: cannot start dirty degraded array for %s\n", | 
 | 			       mdname(mddev)); | 
 | 			goto abort; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	{ | 
 | 		mddev->thread = md_register_thread(raid5d, mddev, "%s_raid5"); | 
 | 		if (!mddev->thread) { | 
 | 			printk(KERN_ERR  | 
 | 				"raid5: couldn't allocate thread for %s\n", | 
 | 				mdname(mddev)); | 
 | 			goto abort; | 
 | 		} | 
 | 	} | 
 | 	memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + | 
 | 		 conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; | 
 | 	if (grow_stripes(conf, conf->max_nr_stripes)) { | 
 | 		printk(KERN_ERR  | 
 | 			"raid5: couldn't allocate %dkB for buffers\n", memory); | 
 | 		shrink_stripes(conf); | 
 | 		md_unregister_thread(mddev->thread); | 
 | 		goto abort; | 
 | 	} else | 
 | 		printk(KERN_INFO "raid5: allocated %dkB for %s\n", | 
 | 			memory, mdname(mddev)); | 
 |  | 
 | 	if (mddev->degraded == 0) | 
 | 		printk("raid5: raid level %d set %s active with %d out of %d" | 
 | 			" devices, algorithm %d\n", conf->level, mdname(mddev),  | 
 | 			mddev->raid_disks-mddev->degraded, mddev->raid_disks, | 
 | 			conf->algorithm); | 
 | 	else | 
 | 		printk(KERN_ALERT "raid5: raid level %d set %s active with %d" | 
 | 			" out of %d devices, algorithm %d\n", conf->level, | 
 | 			mdname(mddev), mddev->raid_disks - mddev->degraded, | 
 | 			mddev->raid_disks, conf->algorithm); | 
 |  | 
 | 	print_raid5_conf(conf); | 
 |  | 
 | 	/* read-ahead size must cover two whole stripes, which is | 
 | 	 * 2 * (n-1) * chunksize where 'n' is the number of raid devices | 
 | 	 */ | 
 | 	{ | 
 | 		int stripe = (mddev->raid_disks-1) * mddev->chunk_size | 
 | 			/ PAGE_SIZE; | 
 | 		if (mddev->queue->backing_dev_info.ra_pages < 2 * stripe) | 
 | 			mddev->queue->backing_dev_info.ra_pages = 2 * stripe; | 
 | 	} | 
 |  | 
 | 	/* Ok, everything is just fine now */ | 
 | 	sysfs_create_group(&mddev->kobj, &raid5_attrs_group); | 
 |  | 
 | 	mddev->queue->unplug_fn = raid5_unplug_device; | 
 | 	mddev->queue->issue_flush_fn = raid5_issue_flush; | 
 |  | 
 | 	mddev->array_size =  mddev->size * (mddev->raid_disks - 1); | 
 | 	return 0; | 
 | abort: | 
 | 	if (conf) { | 
 | 		print_raid5_conf(conf); | 
 | 		kfree(conf->stripe_hashtbl); | 
 | 		kfree(conf); | 
 | 	} | 
 | 	mddev->private = NULL; | 
 | 	printk(KERN_ALERT "raid5: failed to run raid set %s\n", mdname(mddev)); | 
 | 	return -EIO; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | static int stop(mddev_t *mddev) | 
 | { | 
 | 	raid5_conf_t *conf = (raid5_conf_t *) mddev->private; | 
 |  | 
 | 	md_unregister_thread(mddev->thread); | 
 | 	mddev->thread = NULL; | 
 | 	shrink_stripes(conf); | 
 | 	kfree(conf->stripe_hashtbl); | 
 | 	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/ | 
 | 	sysfs_remove_group(&mddev->kobj, &raid5_attrs_group); | 
 | 	kfree(conf); | 
 | 	mddev->private = NULL; | 
 | 	return 0; | 
 | } | 
 |  | 
 | #if RAID5_DEBUG | 
 | static void print_sh (struct stripe_head *sh) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	printk("sh %llu, pd_idx %d, state %ld.\n", | 
 | 		(unsigned long long)sh->sector, sh->pd_idx, sh->state); | 
 | 	printk("sh %llu,  count %d.\n", | 
 | 		(unsigned long long)sh->sector, atomic_read(&sh->count)); | 
 | 	printk("sh %llu, ", (unsigned long long)sh->sector); | 
 | 	for (i = 0; i < sh->raid_conf->raid_disks; i++) { | 
 | 		printk("(cache%d: %p %ld) ",  | 
 | 			i, sh->dev[i].page, sh->dev[i].flags); | 
 | 	} | 
 | 	printk("\n"); | 
 | } | 
 |  | 
 | static void printall (raid5_conf_t *conf) | 
 | { | 
 | 	struct stripe_head *sh; | 
 | 	struct hlist_node *hn; | 
 | 	int i; | 
 |  | 
 | 	spin_lock_irq(&conf->device_lock); | 
 | 	for (i = 0; i < NR_HASH; i++) { | 
 | 		hlist_for_each_entry(sh, hn, &conf->stripe_hashtbl[i], hash) { | 
 | 			if (sh->raid_conf != conf) | 
 | 				continue; | 
 | 			print_sh(sh); | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irq(&conf->device_lock); | 
 | } | 
 | #endif | 
 |  | 
 | static void status (struct seq_file *seq, mddev_t *mddev) | 
 | { | 
 | 	raid5_conf_t *conf = (raid5_conf_t *) mddev->private; | 
 | 	int i; | 
 |  | 
 | 	seq_printf (seq, " level %d, %dk chunk, algorithm %d", mddev->level, mddev->chunk_size >> 10, mddev->layout); | 
 | 	seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->working_disks); | 
 | 	for (i = 0; i < conf->raid_disks; i++) | 
 | 		seq_printf (seq, "%s", | 
 | 			       conf->disks[i].rdev && | 
 | 			       test_bit(In_sync, &conf->disks[i].rdev->flags) ? "U" : "_"); | 
 | 	seq_printf (seq, "]"); | 
 | #if RAID5_DEBUG | 
 | #define D(x) \ | 
 | 	seq_printf (seq, "<"#x":%d>", atomic_read(&conf->x)) | 
 | 	printall(conf); | 
 | #endif | 
 | } | 
 |  | 
 | static void print_raid5_conf (raid5_conf_t *conf) | 
 | { | 
 | 	int i; | 
 | 	struct disk_info *tmp; | 
 |  | 
 | 	printk("RAID5 conf printout:\n"); | 
 | 	if (!conf) { | 
 | 		printk("(conf==NULL)\n"); | 
 | 		return; | 
 | 	} | 
 | 	printk(" --- rd:%d wd:%d fd:%d\n", conf->raid_disks, | 
 | 		 conf->working_disks, conf->failed_disks); | 
 |  | 
 | 	for (i = 0; i < conf->raid_disks; i++) { | 
 | 		char b[BDEVNAME_SIZE]; | 
 | 		tmp = conf->disks + i; | 
 | 		if (tmp->rdev) | 
 | 		printk(" disk %d, o:%d, dev:%s\n", | 
 | 			i, !test_bit(Faulty, &tmp->rdev->flags), | 
 | 			bdevname(tmp->rdev->bdev,b)); | 
 | 	} | 
 | } | 
 |  | 
 | static int raid5_spare_active(mddev_t *mddev) | 
 | { | 
 | 	int i; | 
 | 	raid5_conf_t *conf = mddev->private; | 
 | 	struct disk_info *tmp; | 
 |  | 
 | 	for (i = 0; i < conf->raid_disks; i++) { | 
 | 		tmp = conf->disks + i; | 
 | 		if (tmp->rdev | 
 | 		    && !test_bit(Faulty, &tmp->rdev->flags) | 
 | 		    && !test_bit(In_sync, &tmp->rdev->flags)) { | 
 | 			mddev->degraded--; | 
 | 			conf->failed_disks--; | 
 | 			conf->working_disks++; | 
 | 			set_bit(In_sync, &tmp->rdev->flags); | 
 | 		} | 
 | 	} | 
 | 	print_raid5_conf(conf); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int raid5_remove_disk(mddev_t *mddev, int number) | 
 | { | 
 | 	raid5_conf_t *conf = mddev->private; | 
 | 	int err = 0; | 
 | 	mdk_rdev_t *rdev; | 
 | 	struct disk_info *p = conf->disks + number; | 
 |  | 
 | 	print_raid5_conf(conf); | 
 | 	rdev = p->rdev; | 
 | 	if (rdev) { | 
 | 		if (test_bit(In_sync, &rdev->flags) || | 
 | 		    atomic_read(&rdev->nr_pending)) { | 
 | 			err = -EBUSY; | 
 | 			goto abort; | 
 | 		} | 
 | 		p->rdev = NULL; | 
 | 		synchronize_rcu(); | 
 | 		if (atomic_read(&rdev->nr_pending)) { | 
 | 			/* lost the race, try later */ | 
 | 			err = -EBUSY; | 
 | 			p->rdev = rdev; | 
 | 		} | 
 | 	} | 
 | abort: | 
 |  | 
 | 	print_raid5_conf(conf); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int raid5_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) | 
 | { | 
 | 	raid5_conf_t *conf = mddev->private; | 
 | 	int found = 0; | 
 | 	int disk; | 
 | 	struct disk_info *p; | 
 |  | 
 | 	if (mddev->degraded > 1) | 
 | 		/* no point adding a device */ | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * find the disk ... | 
 | 	 */ | 
 | 	for (disk=0; disk < mddev->raid_disks; disk++) | 
 | 		if ((p=conf->disks + disk)->rdev == NULL) { | 
 | 			clear_bit(In_sync, &rdev->flags); | 
 | 			rdev->raid_disk = disk; | 
 | 			found = 1; | 
 | 			if (rdev->saved_raid_disk != disk) | 
 | 				conf->fullsync = 1; | 
 | 			rcu_assign_pointer(p->rdev, rdev); | 
 | 			break; | 
 | 		} | 
 | 	print_raid5_conf(conf); | 
 | 	return found; | 
 | } | 
 |  | 
 | static int raid5_resize(mddev_t *mddev, sector_t sectors) | 
 | { | 
 | 	/* no resync is happening, and there is enough space | 
 | 	 * on all devices, so we can resize. | 
 | 	 * We need to make sure resync covers any new space. | 
 | 	 * If the array is shrinking we should possibly wait until | 
 | 	 * any io in the removed space completes, but it hardly seems | 
 | 	 * worth it. | 
 | 	 */ | 
 | 	sectors &= ~((sector_t)mddev->chunk_size/512 - 1); | 
 | 	mddev->array_size = (sectors * (mddev->raid_disks-1))>>1; | 
 | 	set_capacity(mddev->gendisk, mddev->array_size << 1); | 
 | 	mddev->changed = 1; | 
 | 	if (sectors/2  > mddev->size && mddev->recovery_cp == MaxSector) { | 
 | 		mddev->recovery_cp = mddev->size << 1; | 
 | 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); | 
 | 	} | 
 | 	mddev->size = sectors /2; | 
 | 	mddev->resync_max_sectors = sectors; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void raid5_quiesce(mddev_t *mddev, int state) | 
 | { | 
 | 	raid5_conf_t *conf = mddev_to_conf(mddev); | 
 |  | 
 | 	switch(state) { | 
 | 	case 1: /* stop all writes */ | 
 | 		spin_lock_irq(&conf->device_lock); | 
 | 		conf->quiesce = 1; | 
 | 		wait_event_lock_irq(conf->wait_for_stripe, | 
 | 				    atomic_read(&conf->active_stripes) == 0, | 
 | 				    conf->device_lock, /* nothing */); | 
 | 		spin_unlock_irq(&conf->device_lock); | 
 | 		break; | 
 |  | 
 | 	case 0: /* re-enable writes */ | 
 | 		spin_lock_irq(&conf->device_lock); | 
 | 		conf->quiesce = 0; | 
 | 		wake_up(&conf->wait_for_stripe); | 
 | 		spin_unlock_irq(&conf->device_lock); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static struct mdk_personality raid5_personality = | 
 | { | 
 | 	.name		= "raid5", | 
 | 	.level		= 5, | 
 | 	.owner		= THIS_MODULE, | 
 | 	.make_request	= make_request, | 
 | 	.run		= run, | 
 | 	.stop		= stop, | 
 | 	.status		= status, | 
 | 	.error_handler	= error, | 
 | 	.hot_add_disk	= raid5_add_disk, | 
 | 	.hot_remove_disk= raid5_remove_disk, | 
 | 	.spare_active	= raid5_spare_active, | 
 | 	.sync_request	= sync_request, | 
 | 	.resize		= raid5_resize, | 
 | 	.quiesce	= raid5_quiesce, | 
 | }; | 
 |  | 
 | static struct mdk_personality raid4_personality = | 
 | { | 
 | 	.name		= "raid4", | 
 | 	.level		= 4, | 
 | 	.owner		= THIS_MODULE, | 
 | 	.make_request	= make_request, | 
 | 	.run		= run, | 
 | 	.stop		= stop, | 
 | 	.status		= status, | 
 | 	.error_handler	= error, | 
 | 	.hot_add_disk	= raid5_add_disk, | 
 | 	.hot_remove_disk= raid5_remove_disk, | 
 | 	.spare_active	= raid5_spare_active, | 
 | 	.sync_request	= sync_request, | 
 | 	.resize		= raid5_resize, | 
 | 	.quiesce	= raid5_quiesce, | 
 | }; | 
 |  | 
 | static int __init raid5_init(void) | 
 | { | 
 | 	register_md_personality(&raid5_personality); | 
 | 	register_md_personality(&raid4_personality); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void raid5_exit(void) | 
 | { | 
 | 	unregister_md_personality(&raid5_personality); | 
 | 	unregister_md_personality(&raid4_personality); | 
 | } | 
 |  | 
 | module_init(raid5_init); | 
 | module_exit(raid5_exit); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("md-personality-4"); /* RAID5 */ | 
 | MODULE_ALIAS("md-raid5"); | 
 | MODULE_ALIAS("md-raid4"); | 
 | MODULE_ALIAS("md-level-5"); | 
 | MODULE_ALIAS("md-level-4"); |