| /* | |
| * raid1.c : Multiple Devices driver for Linux | |
| * | |
| * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat | |
| * | |
| * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman | |
| * | |
| * RAID-1 management functions. | |
| * | |
| * Better read-balancing code written by Mika Kuoppala <miku@iki.fi>, 2000 | |
| * | |
| * Fixes to reconstruction by Jakob Østergaard" <jakob@ostenfeld.dk> | |
| * Various fixes by Neil Brown <neilb@cse.unsw.edu.au> | |
| * | |
| * Changes by Peter T. Breuer <ptb@it.uc3m.es> 31/1/2003 to support | |
| * bitmapped intelligence in resync: | |
| * | |
| * - bitmap marked during normal i/o | |
| * - bitmap used to skip nondirty blocks during sync | |
| * | |
| * Additions to bitmap code, (C) 2003-2004 Paul Clements, SteelEye Technology: | |
| * - persistent bitmap code | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * (for example /usr/src/linux/COPYING); if not, write to the Free | |
| * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/ratelimit.h> | |
| #include "md.h" | |
| #include "raid1.h" | |
| #include "bitmap.h" | |
| #define DEBUG 0 | |
| #define PRINTK(x...) do { if (DEBUG) printk(x); } while (0) | |
| /* | |
| * Number of guaranteed r1bios in case of extreme VM load: | |
| */ | |
| #define NR_RAID1_BIOS 256 | |
| static void allow_barrier(conf_t *conf); | |
| static void lower_barrier(conf_t *conf); | |
| static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) | |
| { | |
| struct pool_info *pi = data; | |
| int size = offsetof(r1bio_t, bios[pi->raid_disks]); | |
| /* allocate a r1bio with room for raid_disks entries in the bios array */ | |
| return kzalloc(size, gfp_flags); | |
| } | |
| static void r1bio_pool_free(void *r1_bio, void *data) | |
| { | |
| kfree(r1_bio); | |
| } | |
| #define RESYNC_BLOCK_SIZE (64*1024) | |
| //#define RESYNC_BLOCK_SIZE PAGE_SIZE | |
| #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) | |
| #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE) | |
| #define RESYNC_WINDOW (2048*1024) | |
| static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data) | |
| { | |
| struct pool_info *pi = data; | |
| struct page *page; | |
| r1bio_t *r1_bio; | |
| struct bio *bio; | |
| int i, j; | |
| r1_bio = r1bio_pool_alloc(gfp_flags, pi); | |
| if (!r1_bio) | |
| return NULL; | |
| /* | |
| * Allocate bios : 1 for reading, n-1 for writing | |
| */ | |
| for (j = pi->raid_disks ; j-- ; ) { | |
| bio = bio_kmalloc(gfp_flags, RESYNC_PAGES); | |
| if (!bio) | |
| goto out_free_bio; | |
| r1_bio->bios[j] = bio; | |
| } | |
| /* | |
| * Allocate RESYNC_PAGES data pages and attach them to | |
| * the first bio. | |
| * If this is a user-requested check/repair, allocate | |
| * RESYNC_PAGES for each bio. | |
| */ | |
| if (test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery)) | |
| j = pi->raid_disks; | |
| else | |
| j = 1; | |
| while(j--) { | |
| bio = r1_bio->bios[j]; | |
| for (i = 0; i < RESYNC_PAGES; i++) { | |
| page = alloc_page(gfp_flags); | |
| if (unlikely(!page)) | |
| goto out_free_pages; | |
| bio->bi_io_vec[i].bv_page = page; | |
| bio->bi_vcnt = i+1; | |
| } | |
| } | |
| /* If not user-requests, copy the page pointers to all bios */ | |
| if (!test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery)) { | |
| for (i=0; i<RESYNC_PAGES ; i++) | |
| for (j=1; j<pi->raid_disks; j++) | |
| r1_bio->bios[j]->bi_io_vec[i].bv_page = | |
| r1_bio->bios[0]->bi_io_vec[i].bv_page; | |
| } | |
| r1_bio->master_bio = NULL; | |
| return r1_bio; | |
| out_free_pages: | |
| for (j=0 ; j < pi->raid_disks; j++) | |
| for (i=0; i < r1_bio->bios[j]->bi_vcnt ; i++) | |
| put_page(r1_bio->bios[j]->bi_io_vec[i].bv_page); | |
| j = -1; | |
| out_free_bio: | |
| while ( ++j < pi->raid_disks ) | |
| bio_put(r1_bio->bios[j]); | |
| r1bio_pool_free(r1_bio, data); | |
| return NULL; | |
| } | |
| static void r1buf_pool_free(void *__r1_bio, void *data) | |
| { | |
| struct pool_info *pi = data; | |
| int i,j; | |
| r1bio_t *r1bio = __r1_bio; | |
| for (i = 0; i < RESYNC_PAGES; i++) | |
| for (j = pi->raid_disks; j-- ;) { | |
| if (j == 0 || | |
| r1bio->bios[j]->bi_io_vec[i].bv_page != | |
| r1bio->bios[0]->bi_io_vec[i].bv_page) | |
| safe_put_page(r1bio->bios[j]->bi_io_vec[i].bv_page); | |
| } | |
| for (i=0 ; i < pi->raid_disks; i++) | |
| bio_put(r1bio->bios[i]); | |
| r1bio_pool_free(r1bio, data); | |
| } | |
| static void put_all_bios(conf_t *conf, r1bio_t *r1_bio) | |
| { | |
| int i; | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| struct bio **bio = r1_bio->bios + i; | |
| if (!BIO_SPECIAL(*bio)) | |
| bio_put(*bio); | |
| *bio = NULL; | |
| } | |
| } | |
| static void free_r1bio(r1bio_t *r1_bio) | |
| { | |
| conf_t *conf = r1_bio->mddev->private; | |
| put_all_bios(conf, r1_bio); | |
| mempool_free(r1_bio, conf->r1bio_pool); | |
| } | |
| static void put_buf(r1bio_t *r1_bio) | |
| { | |
| conf_t *conf = r1_bio->mddev->private; | |
| int i; | |
| for (i=0; i<conf->raid_disks; i++) { | |
| struct bio *bio = r1_bio->bios[i]; | |
| if (bio->bi_end_io) | |
| rdev_dec_pending(conf->mirrors[i].rdev, r1_bio->mddev); | |
| } | |
| mempool_free(r1_bio, conf->r1buf_pool); | |
| lower_barrier(conf); | |
| } | |
| static void reschedule_retry(r1bio_t *r1_bio) | |
| { | |
| unsigned long flags; | |
| mddev_t *mddev = r1_bio->mddev; | |
| conf_t *conf = mddev->private; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| list_add(&r1_bio->retry_list, &conf->retry_list); | |
| conf->nr_queued ++; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| wake_up(&conf->wait_barrier); | |
| md_wakeup_thread(mddev->thread); | |
| } | |
| /* | |
| * raid_end_bio_io() is called when we have finished servicing a mirrored | |
| * operation and are ready to return a success/failure code to the buffer | |
| * cache layer. | |
| */ | |
| static void call_bio_endio(r1bio_t *r1_bio) | |
| { | |
| struct bio *bio = r1_bio->master_bio; | |
| int done; | |
| conf_t *conf = r1_bio->mddev->private; | |
| if (bio->bi_phys_segments) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| bio->bi_phys_segments--; | |
| done = (bio->bi_phys_segments == 0); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| } else | |
| done = 1; | |
| if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) | |
| clear_bit(BIO_UPTODATE, &bio->bi_flags); | |
| if (done) { | |
| bio_endio(bio, 0); | |
| /* | |
| * Wake up any possible resync thread that waits for the device | |
| * to go idle. | |
| */ | |
| allow_barrier(conf); | |
| } | |
| } | |
| static void raid_end_bio_io(r1bio_t *r1_bio) | |
| { | |
| struct bio *bio = r1_bio->master_bio; | |
| /* if nobody has done the final endio yet, do it now */ | |
| if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { | |
| PRINTK(KERN_DEBUG "raid1: sync end %s on sectors %llu-%llu\n", | |
| (bio_data_dir(bio) == WRITE) ? "write" : "read", | |
| (unsigned long long) bio->bi_sector, | |
| (unsigned long long) bio->bi_sector + | |
| (bio->bi_size >> 9) - 1); | |
| call_bio_endio(r1_bio); | |
| } | |
| free_r1bio(r1_bio); | |
| } | |
| /* | |
| * Update disk head position estimator based on IRQ completion info. | |
| */ | |
| static inline void update_head_pos(int disk, r1bio_t *r1_bio) | |
| { | |
| conf_t *conf = r1_bio->mddev->private; | |
| conf->mirrors[disk].head_position = | |
| r1_bio->sector + (r1_bio->sectors); | |
| } | |
| static void raid1_end_read_request(struct bio *bio, int error) | |
| { | |
| int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); | |
| r1bio_t *r1_bio = bio->bi_private; | |
| int mirror; | |
| conf_t *conf = r1_bio->mddev->private; | |
| mirror = r1_bio->read_disk; | |
| /* | |
| * this branch is our 'one mirror IO has finished' event handler: | |
| */ | |
| update_head_pos(mirror, r1_bio); | |
| if (uptodate) | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| else { | |
| /* If all other devices have failed, we want to return | |
| * the error upwards rather than fail the last device. | |
| * Here we redefine "uptodate" to mean "Don't want to retry" | |
| */ | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (r1_bio->mddev->degraded == conf->raid_disks || | |
| (r1_bio->mddev->degraded == conf->raid_disks-1 && | |
| !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags))) | |
| uptodate = 1; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| } | |
| if (uptodate) | |
| raid_end_bio_io(r1_bio); | |
| else { | |
| /* | |
| * oops, read error: | |
| */ | |
| char b[BDEVNAME_SIZE]; | |
| printk_ratelimited( | |
| KERN_ERR "md/raid1:%s: %s: " | |
| "rescheduling sector %llu\n", | |
| mdname(conf->mddev), | |
| bdevname(conf->mirrors[mirror].rdev->bdev, | |
| b), | |
| (unsigned long long)r1_bio->sector); | |
| set_bit(R1BIO_ReadError, &r1_bio->state); | |
| reschedule_retry(r1_bio); | |
| } | |
| rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev); | |
| } | |
| static void close_write(r1bio_t *r1_bio) | |
| { | |
| /* it really is the end of this request */ | |
| if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { | |
| /* free extra copy of the data pages */ | |
| int i = r1_bio->behind_page_count; | |
| while (i--) | |
| safe_put_page(r1_bio->behind_bvecs[i].bv_page); | |
| kfree(r1_bio->behind_bvecs); | |
| r1_bio->behind_bvecs = NULL; | |
| } | |
| /* clear the bitmap if all writes complete successfully */ | |
| bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector, | |
| r1_bio->sectors, | |
| !test_bit(R1BIO_Degraded, &r1_bio->state), | |
| test_bit(R1BIO_BehindIO, &r1_bio->state)); | |
| md_write_end(r1_bio->mddev); | |
| } | |
| static void r1_bio_write_done(r1bio_t *r1_bio) | |
| { | |
| if (!atomic_dec_and_test(&r1_bio->remaining)) | |
| return; | |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| reschedule_retry(r1_bio); | |
| else { | |
| close_write(r1_bio); | |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state)) | |
| reschedule_retry(r1_bio); | |
| else | |
| raid_end_bio_io(r1_bio); | |
| } | |
| } | |
| static void raid1_end_write_request(struct bio *bio, int error) | |
| { | |
| int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); | |
| r1bio_t *r1_bio = bio->bi_private; | |
| int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state); | |
| conf_t *conf = r1_bio->mddev->private; | |
| struct bio *to_put = NULL; | |
| for (mirror = 0; mirror < conf->raid_disks; mirror++) | |
| if (r1_bio->bios[mirror] == bio) | |
| break; | |
| /* | |
| * 'one mirror IO has finished' event handler: | |
| */ | |
| if (!uptodate) { | |
| set_bit(WriteErrorSeen, | |
| &conf->mirrors[mirror].rdev->flags); | |
| set_bit(R1BIO_WriteError, &r1_bio->state); | |
| } else { | |
| /* | |
| * Set R1BIO_Uptodate in our master bio, so that we | |
| * will return a good error code for to the higher | |
| * levels even if IO on some other mirrored buffer | |
| * fails. | |
| * | |
| * The 'master' represents the composite IO operation | |
| * to user-side. So if something waits for IO, then it | |
| * will wait for the 'master' bio. | |
| */ | |
| sector_t first_bad; | |
| int bad_sectors; | |
| r1_bio->bios[mirror] = NULL; | |
| to_put = bio; | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| /* Maybe we can clear some bad blocks. */ | |
| if (is_badblock(conf->mirrors[mirror].rdev, | |
| r1_bio->sector, r1_bio->sectors, | |
| &first_bad, &bad_sectors)) { | |
| r1_bio->bios[mirror] = IO_MADE_GOOD; | |
| set_bit(R1BIO_MadeGood, &r1_bio->state); | |
| } | |
| } | |
| update_head_pos(mirror, r1_bio); | |
| if (behind) { | |
| if (test_bit(WriteMostly, &conf->mirrors[mirror].rdev->flags)) | |
| atomic_dec(&r1_bio->behind_remaining); | |
| /* | |
| * In behind mode, we ACK the master bio once the I/O | |
| * has safely reached all non-writemostly | |
| * disks. Setting the Returned bit ensures that this | |
| * gets done only once -- we don't ever want to return | |
| * -EIO here, instead we'll wait | |
| */ | |
| if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && | |
| test_bit(R1BIO_Uptodate, &r1_bio->state)) { | |
| /* Maybe we can return now */ | |
| if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { | |
| struct bio *mbio = r1_bio->master_bio; | |
| PRINTK(KERN_DEBUG "raid1: behind end write sectors %llu-%llu\n", | |
| (unsigned long long) mbio->bi_sector, | |
| (unsigned long long) mbio->bi_sector + | |
| (mbio->bi_size >> 9) - 1); | |
| call_bio_endio(r1_bio); | |
| } | |
| } | |
| } | |
| if (r1_bio->bios[mirror] == NULL) | |
| rdev_dec_pending(conf->mirrors[mirror].rdev, | |
| conf->mddev); | |
| /* | |
| * Let's see if all mirrored write operations have finished | |
| * already. | |
| */ | |
| r1_bio_write_done(r1_bio); | |
| if (to_put) | |
| bio_put(to_put); | |
| } | |
| /* | |
| * This routine returns the disk from which the requested read should | |
| * be done. There is a per-array 'next expected sequential IO' sector | |
| * number - if this matches on the next IO then we use the last disk. | |
| * There is also a per-disk 'last know head position' sector that is | |
| * maintained from IRQ contexts, both the normal and the resync IO | |
| * completion handlers update this position correctly. If there is no | |
| * perfect sequential match then we pick the disk whose head is closest. | |
| * | |
| * If there are 2 mirrors in the same 2 devices, performance degrades | |
| * because position is mirror, not device based. | |
| * | |
| * The rdev for the device selected will have nr_pending incremented. | |
| */ | |
| static int read_balance(conf_t *conf, r1bio_t *r1_bio, int *max_sectors) | |
| { | |
| const sector_t this_sector = r1_bio->sector; | |
| int sectors; | |
| int best_good_sectors; | |
| int start_disk; | |
| int best_disk; | |
| int i; | |
| sector_t best_dist; | |
| mdk_rdev_t *rdev; | |
| int choose_first; | |
| rcu_read_lock(); | |
| /* | |
| * Check if we can balance. We can balance on the whole | |
| * device if no resync is going on, or below the resync window. | |
| * We take the first readable disk when above the resync window. | |
| */ | |
| retry: | |
| sectors = r1_bio->sectors; | |
| best_disk = -1; | |
| best_dist = MaxSector; | |
| best_good_sectors = 0; | |
| if (conf->mddev->recovery_cp < MaxSector && | |
| (this_sector + sectors >= conf->next_resync)) { | |
| choose_first = 1; | |
| start_disk = 0; | |
| } else { | |
| choose_first = 0; | |
| start_disk = conf->last_used; | |
| } | |
| for (i = 0 ; i < conf->raid_disks ; i++) { | |
| sector_t dist; | |
| sector_t first_bad; | |
| int bad_sectors; | |
| int disk = start_disk + i; | |
| if (disk >= conf->raid_disks) | |
| disk -= conf->raid_disks; | |
| rdev = rcu_dereference(conf->mirrors[disk].rdev); | |
| if (r1_bio->bios[disk] == IO_BLOCKED | |
| || rdev == NULL | |
| || test_bit(Faulty, &rdev->flags)) | |
| continue; | |
| if (!test_bit(In_sync, &rdev->flags) && | |
| rdev->recovery_offset < this_sector + sectors) | |
| continue; | |
| if (test_bit(WriteMostly, &rdev->flags)) { | |
| /* Don't balance among write-mostly, just | |
| * use the first as a last resort */ | |
| if (best_disk < 0) | |
| best_disk = disk; | |
| continue; | |
| } | |
| /* This is a reasonable device to use. It might | |
| * even be best. | |
| */ | |
| if (is_badblock(rdev, this_sector, sectors, | |
| &first_bad, &bad_sectors)) { | |
| if (best_dist < MaxSector) | |
| /* already have a better device */ | |
| continue; | |
| if (first_bad <= this_sector) { | |
| /* cannot read here. If this is the 'primary' | |
| * device, then we must not read beyond | |
| * bad_sectors from another device.. | |
| */ | |
| bad_sectors -= (this_sector - first_bad); | |
| if (choose_first && sectors > bad_sectors) | |
| sectors = bad_sectors; | |
| if (best_good_sectors > sectors) | |
| best_good_sectors = sectors; | |
| } else { | |
| sector_t good_sectors = first_bad - this_sector; | |
| if (good_sectors > best_good_sectors) { | |
| best_good_sectors = good_sectors; | |
| best_disk = disk; | |
| } | |
| if (choose_first) | |
| break; | |
| } | |
| continue; | |
| } else | |
| best_good_sectors = sectors; | |
| dist = abs(this_sector - conf->mirrors[disk].head_position); | |
| if (choose_first | |
| /* Don't change to another disk for sequential reads */ | |
| || conf->next_seq_sect == this_sector | |
| || dist == 0 | |
| /* If device is idle, use it */ | |
| || atomic_read(&rdev->nr_pending) == 0) { | |
| best_disk = disk; | |
| break; | |
| } | |
| if (dist < best_dist) { | |
| best_dist = dist; | |
| best_disk = disk; | |
| } | |
| } | |
| if (best_disk >= 0) { | |
| rdev = rcu_dereference(conf->mirrors[best_disk].rdev); | |
| if (!rdev) | |
| goto retry; | |
| atomic_inc(&rdev->nr_pending); | |
| if (test_bit(Faulty, &rdev->flags)) { | |
| /* cannot risk returning a device that failed | |
| * before we inc'ed nr_pending | |
| */ | |
| rdev_dec_pending(rdev, conf->mddev); | |
| goto retry; | |
| } | |
| sectors = best_good_sectors; | |
| conf->next_seq_sect = this_sector + sectors; | |
| conf->last_used = best_disk; | |
| } | |
| rcu_read_unlock(); | |
| *max_sectors = sectors; | |
| return best_disk; | |
| } | |
| int md_raid1_congested(mddev_t *mddev, int bits) | |
| { | |
| conf_t *conf = mddev->private; | |
| int i, ret = 0; | |
| rcu_read_lock(); | |
| for (i = 0; i < mddev->raid_disks; i++) { | |
| mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); | |
| if (rdev && !test_bit(Faulty, &rdev->flags)) { | |
| struct request_queue *q = bdev_get_queue(rdev->bdev); | |
| BUG_ON(!q); | |
| /* Note the '|| 1' - when read_balance prefers | |
| * non-congested targets, it can be removed | |
| */ | |
| if ((bits & (1<<BDI_async_congested)) || 1) | |
| ret |= bdi_congested(&q->backing_dev_info, bits); | |
| else | |
| ret &= bdi_congested(&q->backing_dev_info, bits); | |
| } | |
| } | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(md_raid1_congested); | |
| static int raid1_congested(void *data, int bits) | |
| { | |
| mddev_t *mddev = data; | |
| return mddev_congested(mddev, bits) || | |
| md_raid1_congested(mddev, bits); | |
| } | |
| static void flush_pending_writes(conf_t *conf) | |
| { | |
| /* Any writes that have been queued but are awaiting | |
| * bitmap updates get flushed here. | |
| */ | |
| spin_lock_irq(&conf->device_lock); | |
| if (conf->pending_bio_list.head) { | |
| struct bio *bio; | |
| bio = bio_list_get(&conf->pending_bio_list); | |
| spin_unlock_irq(&conf->device_lock); | |
| /* flush any pending bitmap writes to | |
| * disk before proceeding w/ I/O */ | |
| bitmap_unplug(conf->mddev->bitmap); | |
| while (bio) { /* submit pending writes */ | |
| struct bio *next = bio->bi_next; | |
| bio->bi_next = NULL; | |
| generic_make_request(bio); | |
| bio = next; | |
| } | |
| } else | |
| spin_unlock_irq(&conf->device_lock); | |
| } | |
| /* Barriers.... | |
| * Sometimes we need to suspend IO while we do something else, | |
| * either some resync/recovery, or reconfigure the array. | |
| * To do this we raise a 'barrier'. | |
| * The 'barrier' is a counter that can be raised multiple times | |
| * to count how many activities are happening which preclude | |
| * normal IO. | |
| * We can only raise the barrier if there is no pending IO. | |
| * i.e. if nr_pending == 0. | |
| * We choose only to raise the barrier if no-one is waiting for the | |
| * barrier to go down. This means that as soon as an IO request | |
| * is ready, no other operations which require a barrier will start | |
| * until the IO request has had a chance. | |
| * | |
| * So: regular IO calls 'wait_barrier'. When that returns there | |
| * is no backgroup IO happening, It must arrange to call | |
| * allow_barrier when it has finished its IO. | |
| * backgroup IO calls must call raise_barrier. Once that returns | |
| * there is no normal IO happeing. It must arrange to call | |
| * lower_barrier when the particular background IO completes. | |
| */ | |
| #define RESYNC_DEPTH 32 | |
| static void raise_barrier(conf_t *conf) | |
| { | |
| spin_lock_irq(&conf->resync_lock); | |
| /* Wait until no block IO is waiting */ | |
| wait_event_lock_irq(conf->wait_barrier, !conf->nr_waiting, | |
| conf->resync_lock, ); | |
| /* block any new IO from starting */ | |
| conf->barrier++; | |
| /* Now wait for all pending IO to complete */ | |
| wait_event_lock_irq(conf->wait_barrier, | |
| !conf->nr_pending && conf->barrier < RESYNC_DEPTH, | |
| conf->resync_lock, ); | |
| spin_unlock_irq(&conf->resync_lock); | |
| } | |
| static void lower_barrier(conf_t *conf) | |
| { | |
| unsigned long flags; | |
| BUG_ON(conf->barrier <= 0); | |
| spin_lock_irqsave(&conf->resync_lock, flags); | |
| conf->barrier--; | |
| spin_unlock_irqrestore(&conf->resync_lock, flags); | |
| wake_up(&conf->wait_barrier); | |
| } | |
| static void wait_barrier(conf_t *conf) | |
| { | |
| spin_lock_irq(&conf->resync_lock); | |
| if (conf->barrier) { | |
| conf->nr_waiting++; | |
| wait_event_lock_irq(conf->wait_barrier, !conf->barrier, | |
| conf->resync_lock, | |
| ); | |
| conf->nr_waiting--; | |
| } | |
| conf->nr_pending++; | |
| spin_unlock_irq(&conf->resync_lock); | |
| } | |
| static void allow_barrier(conf_t *conf) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->resync_lock, flags); | |
| conf->nr_pending--; | |
| spin_unlock_irqrestore(&conf->resync_lock, flags); | |
| wake_up(&conf->wait_barrier); | |
| } | |
| static void freeze_array(conf_t *conf) | |
| { | |
| /* stop syncio and normal IO and wait for everything to | |
| * go quite. | |
| * We increment barrier and nr_waiting, and then | |
| * wait until nr_pending match nr_queued+1 | |
| * This is called in the context of one normal IO request | |
| * that has failed. Thus any sync request that might be pending | |
| * will be blocked by nr_pending, and we need to wait for | |
| * pending IO requests to complete or be queued for re-try. | |
| * Thus the number queued (nr_queued) plus this request (1) | |
| * must match the number of pending IOs (nr_pending) before | |
| * we continue. | |
| */ | |
| spin_lock_irq(&conf->resync_lock); | |
| conf->barrier++; | |
| conf->nr_waiting++; | |
| wait_event_lock_irq(conf->wait_barrier, | |
| conf->nr_pending == conf->nr_queued+1, | |
| conf->resync_lock, | |
| flush_pending_writes(conf)); | |
| spin_unlock_irq(&conf->resync_lock); | |
| } | |
| static void unfreeze_array(conf_t *conf) | |
| { | |
| /* reverse the effect of the freeze */ | |
| spin_lock_irq(&conf->resync_lock); | |
| conf->barrier--; | |
| conf->nr_waiting--; | |
| wake_up(&conf->wait_barrier); | |
| spin_unlock_irq(&conf->resync_lock); | |
| } | |
| /* duplicate the data pages for behind I/O | |
| */ | |
| static void alloc_behind_pages(struct bio *bio, r1bio_t *r1_bio) | |
| { | |
| int i; | |
| struct bio_vec *bvec; | |
| struct bio_vec *bvecs = kzalloc(bio->bi_vcnt * sizeof(struct bio_vec), | |
| GFP_NOIO); | |
| if (unlikely(!bvecs)) | |
| return; | |
| bio_for_each_segment(bvec, bio, i) { | |
| bvecs[i] = *bvec; | |
| bvecs[i].bv_page = alloc_page(GFP_NOIO); | |
| if (unlikely(!bvecs[i].bv_page)) | |
| goto do_sync_io; | |
| memcpy(kmap(bvecs[i].bv_page) + bvec->bv_offset, | |
| kmap(bvec->bv_page) + bvec->bv_offset, bvec->bv_len); | |
| kunmap(bvecs[i].bv_page); | |
| kunmap(bvec->bv_page); | |
| } | |
| r1_bio->behind_bvecs = bvecs; | |
| r1_bio->behind_page_count = bio->bi_vcnt; | |
| set_bit(R1BIO_BehindIO, &r1_bio->state); | |
| return; | |
| do_sync_io: | |
| for (i = 0; i < bio->bi_vcnt; i++) | |
| if (bvecs[i].bv_page) | |
| put_page(bvecs[i].bv_page); | |
| kfree(bvecs); | |
| PRINTK("%dB behind alloc failed, doing sync I/O\n", bio->bi_size); | |
| } | |
| static int make_request(mddev_t *mddev, struct bio * bio) | |
| { | |
| conf_t *conf = mddev->private; | |
| mirror_info_t *mirror; | |
| r1bio_t *r1_bio; | |
| struct bio *read_bio; | |
| int i, disks; | |
| struct bitmap *bitmap; | |
| unsigned long flags; | |
| const int rw = bio_data_dir(bio); | |
| const unsigned long do_sync = (bio->bi_rw & REQ_SYNC); | |
| const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA)); | |
| mdk_rdev_t *blocked_rdev; | |
| int plugged; | |
| int first_clone; | |
| int sectors_handled; | |
| int max_sectors; | |
| /* | |
| * Register the new request and wait if the reconstruction | |
| * thread has put up a bar for new requests. | |
| * Continue immediately if no resync is active currently. | |
| */ | |
| md_write_start(mddev, bio); /* wait on superblock update early */ | |
| if (bio_data_dir(bio) == WRITE && | |
| bio->bi_sector + bio->bi_size/512 > mddev->suspend_lo && | |
| bio->bi_sector < mddev->suspend_hi) { | |
| /* As the suspend_* range is controlled by | |
| * userspace, we want an interruptible | |
| * wait. | |
| */ | |
| DEFINE_WAIT(w); | |
| for (;;) { | |
| flush_signals(current); | |
| prepare_to_wait(&conf->wait_barrier, | |
| &w, TASK_INTERRUPTIBLE); | |
| if (bio->bi_sector + bio->bi_size/512 <= mddev->suspend_lo || | |
| bio->bi_sector >= mddev->suspend_hi) | |
| break; | |
| schedule(); | |
| } | |
| finish_wait(&conf->wait_barrier, &w); | |
| } | |
| wait_barrier(conf); | |
| bitmap = mddev->bitmap; | |
| /* | |
| * make_request() can abort the operation when READA is being | |
| * used and no empty request is available. | |
| * | |
| */ | |
| r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); | |
| r1_bio->master_bio = bio; | |
| r1_bio->sectors = bio->bi_size >> 9; | |
| r1_bio->state = 0; | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = bio->bi_sector; | |
| /* We might need to issue multiple reads to different | |
| * devices if there are bad blocks around, so we keep | |
| * track of the number of reads in bio->bi_phys_segments. | |
| * If this is 0, there is only one r1_bio and no locking | |
| * will be needed when requests complete. If it is | |
| * non-zero, then it is the number of not-completed requests. | |
| */ | |
| bio->bi_phys_segments = 0; | |
| clear_bit(BIO_SEG_VALID, &bio->bi_flags); | |
| if (rw == READ) { | |
| /* | |
| * read balancing logic: | |
| */ | |
| int rdisk; | |
| read_again: | |
| rdisk = read_balance(conf, r1_bio, &max_sectors); | |
| if (rdisk < 0) { | |
| /* couldn't find anywhere to read from */ | |
| raid_end_bio_io(r1_bio); | |
| return 0; | |
| } | |
| mirror = conf->mirrors + rdisk; | |
| if (test_bit(WriteMostly, &mirror->rdev->flags) && | |
| bitmap) { | |
| /* Reading from a write-mostly device must | |
| * take care not to over-take any writes | |
| * that are 'behind' | |
| */ | |
| wait_event(bitmap->behind_wait, | |
| atomic_read(&bitmap->behind_writes) == 0); | |
| } | |
| r1_bio->read_disk = rdisk; | |
| read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev); | |
| md_trim_bio(read_bio, r1_bio->sector - bio->bi_sector, | |
| max_sectors); | |
| r1_bio->bios[rdisk] = read_bio; | |
| read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset; | |
| read_bio->bi_bdev = mirror->rdev->bdev; | |
| read_bio->bi_end_io = raid1_end_read_request; | |
| read_bio->bi_rw = READ | do_sync; | |
| read_bio->bi_private = r1_bio; | |
| if (max_sectors < r1_bio->sectors) { | |
| /* could not read all from this device, so we will | |
| * need another r1_bio. | |
| */ | |
| sectors_handled = (r1_bio->sector + max_sectors | |
| - bio->bi_sector); | |
| r1_bio->sectors = max_sectors; | |
| spin_lock_irq(&conf->device_lock); | |
| if (bio->bi_phys_segments == 0) | |
| bio->bi_phys_segments = 2; | |
| else | |
| bio->bi_phys_segments++; | |
| spin_unlock_irq(&conf->device_lock); | |
| /* Cannot call generic_make_request directly | |
| * as that will be queued in __make_request | |
| * and subsequent mempool_alloc might block waiting | |
| * for it. So hand bio over to raid1d. | |
| */ | |
| reschedule_retry(r1_bio); | |
| r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); | |
| r1_bio->master_bio = bio; | |
| r1_bio->sectors = (bio->bi_size >> 9) - sectors_handled; | |
| r1_bio->state = 0; | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = bio->bi_sector + sectors_handled; | |
| goto read_again; | |
| } else | |
| generic_make_request(read_bio); | |
| return 0; | |
| } | |
| /* | |
| * WRITE: | |
| */ | |
| /* first select target devices under rcu_lock and | |
| * inc refcount on their rdev. Record them by setting | |
| * bios[x] to bio | |
| * If there are known/acknowledged bad blocks on any device on | |
| * which we have seen a write error, we want to avoid writing those | |
| * blocks. | |
| * This potentially requires several writes to write around | |
| * the bad blocks. Each set of writes gets it's own r1bio | |
| * with a set of bios attached. | |
| */ | |
| plugged = mddev_check_plugged(mddev); | |
| disks = conf->raid_disks; | |
| retry_write: | |
| blocked_rdev = NULL; | |
| rcu_read_lock(); | |
| max_sectors = r1_bio->sectors; | |
| for (i = 0; i < disks; i++) { | |
| mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); | |
| if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { | |
| atomic_inc(&rdev->nr_pending); | |
| blocked_rdev = rdev; | |
| break; | |
| } | |
| r1_bio->bios[i] = NULL; | |
| if (!rdev || test_bit(Faulty, &rdev->flags)) { | |
| set_bit(R1BIO_Degraded, &r1_bio->state); | |
| continue; | |
| } | |
| atomic_inc(&rdev->nr_pending); | |
| if (test_bit(WriteErrorSeen, &rdev->flags)) { | |
| sector_t first_bad; | |
| int bad_sectors; | |
| int is_bad; | |
| is_bad = is_badblock(rdev, r1_bio->sector, | |
| max_sectors, | |
| &first_bad, &bad_sectors); | |
| if (is_bad < 0) { | |
| /* mustn't write here until the bad block is | |
| * acknowledged*/ | |
| set_bit(BlockedBadBlocks, &rdev->flags); | |
| blocked_rdev = rdev; | |
| break; | |
| } | |
| if (is_bad && first_bad <= r1_bio->sector) { | |
| /* Cannot write here at all */ | |
| bad_sectors -= (r1_bio->sector - first_bad); | |
| if (bad_sectors < max_sectors) | |
| /* mustn't write more than bad_sectors | |
| * to other devices yet | |
| */ | |
| max_sectors = bad_sectors; | |
| rdev_dec_pending(rdev, mddev); | |
| /* We don't set R1BIO_Degraded as that | |
| * only applies if the disk is | |
| * missing, so it might be re-added, | |
| * and we want to know to recover this | |
| * chunk. | |
| * In this case the device is here, | |
| * and the fact that this chunk is not | |
| * in-sync is recorded in the bad | |
| * block log | |
| */ | |
| continue; | |
| } | |
| if (is_bad) { | |
| int good_sectors = first_bad - r1_bio->sector; | |
| if (good_sectors < max_sectors) | |
| max_sectors = good_sectors; | |
| } | |
| } | |
| r1_bio->bios[i] = bio; | |
| } | |
| rcu_read_unlock(); | |
| if (unlikely(blocked_rdev)) { | |
| /* Wait for this device to become unblocked */ | |
| int j; | |
| for (j = 0; j < i; j++) | |
| if (r1_bio->bios[j]) | |
| rdev_dec_pending(conf->mirrors[j].rdev, mddev); | |
| r1_bio->state = 0; | |
| allow_barrier(conf); | |
| md_wait_for_blocked_rdev(blocked_rdev, mddev); | |
| wait_barrier(conf); | |
| goto retry_write; | |
| } | |
| if (max_sectors < r1_bio->sectors) { | |
| /* We are splitting this write into multiple parts, so | |
| * we need to prepare for allocating another r1_bio. | |
| */ | |
| r1_bio->sectors = max_sectors; | |
| spin_lock_irq(&conf->device_lock); | |
| if (bio->bi_phys_segments == 0) | |
| bio->bi_phys_segments = 2; | |
| else | |
| bio->bi_phys_segments++; | |
| spin_unlock_irq(&conf->device_lock); | |
| } | |
| sectors_handled = r1_bio->sector + max_sectors - bio->bi_sector; | |
| atomic_set(&r1_bio->remaining, 1); | |
| atomic_set(&r1_bio->behind_remaining, 0); | |
| first_clone = 1; | |
| for (i = 0; i < disks; i++) { | |
| struct bio *mbio; | |
| if (!r1_bio->bios[i]) | |
| continue; | |
| mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); | |
| md_trim_bio(mbio, r1_bio->sector - bio->bi_sector, max_sectors); | |
| if (first_clone) { | |
| /* do behind I/O ? | |
| * Not if there are too many, or cannot | |
| * allocate memory, or a reader on WriteMostly | |
| * is waiting for behind writes to flush */ | |
| if (bitmap && | |
| (atomic_read(&bitmap->behind_writes) | |
| < mddev->bitmap_info.max_write_behind) && | |
| !waitqueue_active(&bitmap->behind_wait)) | |
| alloc_behind_pages(mbio, r1_bio); | |
| bitmap_startwrite(bitmap, r1_bio->sector, | |
| r1_bio->sectors, | |
| test_bit(R1BIO_BehindIO, | |
| &r1_bio->state)); | |
| first_clone = 0; | |
| } | |
| if (r1_bio->behind_bvecs) { | |
| struct bio_vec *bvec; | |
| int j; | |
| /* Yes, I really want the '__' version so that | |
| * we clear any unused pointer in the io_vec, rather | |
| * than leave them unchanged. This is important | |
| * because when we come to free the pages, we won't | |
| * know the original bi_idx, so we just free | |
| * them all | |
| */ | |
| __bio_for_each_segment(bvec, mbio, j, 0) | |
| bvec->bv_page = r1_bio->behind_bvecs[j].bv_page; | |
| if (test_bit(WriteMostly, &conf->mirrors[i].rdev->flags)) | |
| atomic_inc(&r1_bio->behind_remaining); | |
| } | |
| r1_bio->bios[i] = mbio; | |
| mbio->bi_sector = (r1_bio->sector + | |
| conf->mirrors[i].rdev->data_offset); | |
| mbio->bi_bdev = conf->mirrors[i].rdev->bdev; | |
| mbio->bi_end_io = raid1_end_write_request; | |
| mbio->bi_rw = WRITE | do_flush_fua | do_sync; | |
| mbio->bi_private = r1_bio; | |
| atomic_inc(&r1_bio->remaining); | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| bio_list_add(&conf->pending_bio_list, mbio); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| } | |
| /* Mustn't call r1_bio_write_done before this next test, | |
| * as it could result in the bio being freed. | |
| */ | |
| if (sectors_handled < (bio->bi_size >> 9)) { | |
| r1_bio_write_done(r1_bio); | |
| /* We need another r1_bio. It has already been counted | |
| * in bio->bi_phys_segments | |
| */ | |
| r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); | |
| r1_bio->master_bio = bio; | |
| r1_bio->sectors = (bio->bi_size >> 9) - sectors_handled; | |
| r1_bio->state = 0; | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = bio->bi_sector + sectors_handled; | |
| goto retry_write; | |
| } | |
| r1_bio_write_done(r1_bio); | |
| /* In case raid1d snuck in to freeze_array */ | |
| wake_up(&conf->wait_barrier); | |
| if (do_sync || !bitmap || !plugged) | |
| md_wakeup_thread(mddev->thread); | |
| return 0; | |
| } | |
| static void status(struct seq_file *seq, mddev_t *mddev) | |
| { | |
| conf_t *conf = mddev->private; | |
| int i; | |
| seq_printf(seq, " [%d/%d] [", conf->raid_disks, | |
| conf->raid_disks - mddev->degraded); | |
| rcu_read_lock(); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); | |
| seq_printf(seq, "%s", | |
| rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); | |
| } | |
| rcu_read_unlock(); | |
| seq_printf(seq, "]"); | |
| } | |
| static void error(mddev_t *mddev, mdk_rdev_t *rdev) | |
| { | |
| char b[BDEVNAME_SIZE]; | |
| conf_t *conf = mddev->private; | |
| /* | |
| * If it is not operational, then we have already marked it as dead | |
| * else if it is the last working disks, ignore the error, let the | |
| * next level up know. | |
| * else mark the drive as failed | |
| */ | |
| if (test_bit(In_sync, &rdev->flags) | |
| && (conf->raid_disks - mddev->degraded) == 1) { | |
| /* | |
| * Don't fail the drive, act as though we were just a | |
| * normal single drive. | |
| * However don't try a recovery from this drive as | |
| * it is very likely to fail. | |
| */ | |
| conf->recovery_disabled = mddev->recovery_disabled; | |
| return; | |
| } | |
| set_bit(Blocked, &rdev->flags); | |
| if (test_and_clear_bit(In_sync, &rdev->flags)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| mddev->degraded++; | |
| set_bit(Faulty, &rdev->flags); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| /* | |
| * if recovery is running, make sure it aborts. | |
| */ | |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); | |
| } else | |
| set_bit(Faulty, &rdev->flags); | |
| set_bit(MD_CHANGE_DEVS, &mddev->flags); | |
| printk(KERN_ALERT | |
| "md/raid1:%s: Disk failure on %s, disabling device.\n" | |
| "md/raid1:%s: Operation continuing on %d devices.\n", | |
| mdname(mddev), bdevname(rdev->bdev, b), | |
| mdname(mddev), conf->raid_disks - mddev->degraded); | |
| } | |
| static void print_conf(conf_t *conf) | |
| { | |
| int i; | |
| printk(KERN_DEBUG "RAID1 conf printout:\n"); | |
| if (!conf) { | |
| printk(KERN_DEBUG "(!conf)\n"); | |
| return; | |
| } | |
| printk(KERN_DEBUG " --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded, | |
| conf->raid_disks); | |
| rcu_read_lock(); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| char b[BDEVNAME_SIZE]; | |
| mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev); | |
| if (rdev) | |
| printk(KERN_DEBUG " disk %d, wo:%d, o:%d, dev:%s\n", | |
| i, !test_bit(In_sync, &rdev->flags), | |
| !test_bit(Faulty, &rdev->flags), | |
| bdevname(rdev->bdev,b)); | |
| } | |
| rcu_read_unlock(); | |
| } | |
| static void close_sync(conf_t *conf) | |
| { | |
| wait_barrier(conf); | |
| allow_barrier(conf); | |
| mempool_destroy(conf->r1buf_pool); | |
| conf->r1buf_pool = NULL; | |
| } | |
| static int raid1_spare_active(mddev_t *mddev) | |
| { | |
| int i; | |
| conf_t *conf = mddev->private; | |
| int count = 0; | |
| unsigned long flags; | |
| /* | |
| * Find all failed disks within the RAID1 configuration | |
| * and mark them readable. | |
| * Called under mddev lock, so rcu protection not needed. | |
| */ | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| mdk_rdev_t *rdev = conf->mirrors[i].rdev; | |
| if (rdev | |
| && !test_bit(Faulty, &rdev->flags) | |
| && !test_and_set_bit(In_sync, &rdev->flags)) { | |
| count++; | |
| sysfs_notify_dirent_safe(rdev->sysfs_state); | |
| } | |
| } | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| mddev->degraded -= count; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| print_conf(conf); | |
| return count; | |
| } | |
| static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) | |
| { | |
| conf_t *conf = mddev->private; | |
| int err = -EEXIST; | |
| int mirror = 0; | |
| mirror_info_t *p; | |
| int first = 0; | |
| int last = mddev->raid_disks - 1; | |
| if (mddev->recovery_disabled == conf->recovery_disabled) | |
| return -EBUSY; | |
| if (rdev->raid_disk >= 0) | |
| first = last = rdev->raid_disk; | |
| for (mirror = first; mirror <= last; mirror++) | |
| if ( !(p=conf->mirrors+mirror)->rdev) { | |
| disk_stack_limits(mddev->gendisk, rdev->bdev, | |
| rdev->data_offset << 9); | |
| /* as we don't honour merge_bvec_fn, we must | |
| * never risk violating it, so limit | |
| * ->max_segments to one lying with a single | |
| * page, as a one page request is never in | |
| * violation. | |
| */ | |
| if (rdev->bdev->bd_disk->queue->merge_bvec_fn) { | |
| blk_queue_max_segments(mddev->queue, 1); | |
| blk_queue_segment_boundary(mddev->queue, | |
| PAGE_CACHE_SIZE - 1); | |
| } | |
| p->head_position = 0; | |
| rdev->raid_disk = mirror; | |
| err = 0; | |
| /* As all devices are equivalent, we don't need a full recovery | |
| * if this was recently any drive of the array | |
| */ | |
| if (rdev->saved_raid_disk < 0) | |
| conf->fullsync = 1; | |
| rcu_assign_pointer(p->rdev, rdev); | |
| break; | |
| } | |
| md_integrity_add_rdev(rdev, mddev); | |
| print_conf(conf); | |
| return err; | |
| } | |
| static int raid1_remove_disk(mddev_t *mddev, int number) | |
| { | |
| conf_t *conf = mddev->private; | |
| int err = 0; | |
| mdk_rdev_t *rdev; | |
| mirror_info_t *p = conf->mirrors+ number; | |
| print_conf(conf); | |
| rdev = p->rdev; | |
| if (rdev) { | |
| if (test_bit(In_sync, &rdev->flags) || | |
| atomic_read(&rdev->nr_pending)) { | |
| err = -EBUSY; | |
| goto abort; | |
| } | |
| /* Only remove non-faulty devices if recovery | |
| * is not possible. | |
| */ | |
| if (!test_bit(Faulty, &rdev->flags) && | |
| mddev->recovery_disabled != conf->recovery_disabled && | |
| mddev->degraded < conf->raid_disks) { | |
| err = -EBUSY; | |
| goto abort; | |
| } | |
| p->rdev = NULL; | |
| synchronize_rcu(); | |
| if (atomic_read(&rdev->nr_pending)) { | |
| /* lost the race, try later */ | |
| err = -EBUSY; | |
| p->rdev = rdev; | |
| goto abort; | |
| } | |
| err = md_integrity_register(mddev); | |
| } | |
| abort: | |
| print_conf(conf); | |
| return err; | |
| } | |
| static void end_sync_read(struct bio *bio, int error) | |
| { | |
| r1bio_t *r1_bio = bio->bi_private; | |
| int i; | |
| for (i=r1_bio->mddev->raid_disks; i--; ) | |
| if (r1_bio->bios[i] == bio) | |
| break; | |
| BUG_ON(i < 0); | |
| update_head_pos(i, r1_bio); | |
| /* | |
| * we have read a block, now it needs to be re-written, | |
| * or re-read if the read failed. | |
| * We don't do much here, just schedule handling by raid1d | |
| */ | |
| if (test_bit(BIO_UPTODATE, &bio->bi_flags)) | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| if (atomic_dec_and_test(&r1_bio->remaining)) | |
| reschedule_retry(r1_bio); | |
| } | |
| static void end_sync_write(struct bio *bio, int error) | |
| { | |
| int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); | |
| r1bio_t *r1_bio = bio->bi_private; | |
| mddev_t *mddev = r1_bio->mddev; | |
| conf_t *conf = mddev->private; | |
| int i; | |
| int mirror=0; | |
| sector_t first_bad; | |
| int bad_sectors; | |
| for (i = 0; i < conf->raid_disks; i++) | |
| if (r1_bio->bios[i] == bio) { | |
| mirror = i; | |
| break; | |
| } | |
| if (!uptodate) { | |
| sector_t sync_blocks = 0; | |
| sector_t s = r1_bio->sector; | |
| long sectors_to_go = r1_bio->sectors; | |
| /* make sure these bits doesn't get cleared. */ | |
| do { | |
| bitmap_end_sync(mddev->bitmap, s, | |
| &sync_blocks, 1); | |
| s += sync_blocks; | |
| sectors_to_go -= sync_blocks; | |
| } while (sectors_to_go > 0); | |
| set_bit(WriteErrorSeen, | |
| &conf->mirrors[mirror].rdev->flags); | |
| set_bit(R1BIO_WriteError, &r1_bio->state); | |
| } else if (is_badblock(conf->mirrors[mirror].rdev, | |
| r1_bio->sector, | |
| r1_bio->sectors, | |
| &first_bad, &bad_sectors) && | |
| !is_badblock(conf->mirrors[r1_bio->read_disk].rdev, | |
| r1_bio->sector, | |
| r1_bio->sectors, | |
| &first_bad, &bad_sectors) | |
| ) | |
| set_bit(R1BIO_MadeGood, &r1_bio->state); | |
| update_head_pos(mirror, r1_bio); | |
| if (atomic_dec_and_test(&r1_bio->remaining)) { | |
| int s = r1_bio->sectors; | |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state) || | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| reschedule_retry(r1_bio); | |
| else { | |
| put_buf(r1_bio); | |
| md_done_sync(mddev, s, uptodate); | |
| } | |
| } | |
| } | |
| static int r1_sync_page_io(mdk_rdev_t *rdev, sector_t sector, | |
| int sectors, struct page *page, int rw) | |
| { | |
| if (sync_page_io(rdev, sector, sectors << 9, page, rw, false)) | |
| /* success */ | |
| return 1; | |
| if (rw == WRITE) | |
| set_bit(WriteErrorSeen, &rdev->flags); | |
| /* need to record an error - either for the block or the device */ | |
| if (!rdev_set_badblocks(rdev, sector, sectors, 0)) | |
| md_error(rdev->mddev, rdev); | |
| return 0; | |
| } | |
| static int fix_sync_read_error(r1bio_t *r1_bio) | |
| { | |
| /* Try some synchronous reads of other devices to get | |
| * good data, much like with normal read errors. Only | |
| * read into the pages we already have so we don't | |
| * need to re-issue the read request. | |
| * We don't need to freeze the array, because being in an | |
| * active sync request, there is no normal IO, and | |
| * no overlapping syncs. | |
| * We don't need to check is_badblock() again as we | |
| * made sure that anything with a bad block in range | |
| * will have bi_end_io clear. | |
| */ | |
| mddev_t *mddev = r1_bio->mddev; | |
| conf_t *conf = mddev->private; | |
| struct bio *bio = r1_bio->bios[r1_bio->read_disk]; | |
| sector_t sect = r1_bio->sector; | |
| int sectors = r1_bio->sectors; | |
| int idx = 0; | |
| while(sectors) { | |
| int s = sectors; | |
| int d = r1_bio->read_disk; | |
| int success = 0; | |
| mdk_rdev_t *rdev; | |
| int start; | |
| if (s > (PAGE_SIZE>>9)) | |
| s = PAGE_SIZE >> 9; | |
| do { | |
| if (r1_bio->bios[d]->bi_end_io == end_sync_read) { | |
| /* No rcu protection needed here devices | |
| * can only be removed when no resync is | |
| * active, and resync is currently active | |
| */ | |
| rdev = conf->mirrors[d].rdev; | |
| if (sync_page_io(rdev, sect, s<<9, | |
| bio->bi_io_vec[idx].bv_page, | |
| READ, false)) { | |
| success = 1; | |
| break; | |
| } | |
| } | |
| d++; | |
| if (d == conf->raid_disks) | |
| d = 0; | |
| } while (!success && d != r1_bio->read_disk); | |
| if (!success) { | |
| char b[BDEVNAME_SIZE]; | |
| int abort = 0; | |
| /* Cannot read from anywhere, this block is lost. | |
| * Record a bad block on each device. If that doesn't | |
| * work just disable and interrupt the recovery. | |
| * Don't fail devices as that won't really help. | |
| */ | |
| printk(KERN_ALERT "md/raid1:%s: %s: unrecoverable I/O read error" | |
| " for block %llu\n", | |
| mdname(mddev), | |
| bdevname(bio->bi_bdev, b), | |
| (unsigned long long)r1_bio->sector); | |
| for (d = 0; d < conf->raid_disks; d++) { | |
| rdev = conf->mirrors[d].rdev; | |
| if (!rdev || test_bit(Faulty, &rdev->flags)) | |
| continue; | |
| if (!rdev_set_badblocks(rdev, sect, s, 0)) | |
| abort = 1; | |
| } | |
| if (abort) { | |
| mddev->recovery_disabled = 1; | |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); | |
| md_done_sync(mddev, r1_bio->sectors, 0); | |
| put_buf(r1_bio); | |
| return 0; | |
| } | |
| /* Try next page */ | |
| sectors -= s; | |
| sect += s; | |
| idx++; | |
| continue; | |
| } | |
| start = d; | |
| /* write it back and re-read */ | |
| while (d != r1_bio->read_disk) { | |
| if (d == 0) | |
| d = conf->raid_disks; | |
| d--; | |
| if (r1_bio->bios[d]->bi_end_io != end_sync_read) | |
| continue; | |
| rdev = conf->mirrors[d].rdev; | |
| if (r1_sync_page_io(rdev, sect, s, | |
| bio->bi_io_vec[idx].bv_page, | |
| WRITE) == 0) { | |
| r1_bio->bios[d]->bi_end_io = NULL; | |
| rdev_dec_pending(rdev, mddev); | |
| } | |
| } | |
| d = start; | |
| while (d != r1_bio->read_disk) { | |
| if (d == 0) | |
| d = conf->raid_disks; | |
| d--; | |
| if (r1_bio->bios[d]->bi_end_io != end_sync_read) | |
| continue; | |
| rdev = conf->mirrors[d].rdev; | |
| if (r1_sync_page_io(rdev, sect, s, | |
| bio->bi_io_vec[idx].bv_page, | |
| READ) != 0) | |
| atomic_add(s, &rdev->corrected_errors); | |
| } | |
| sectors -= s; | |
| sect += s; | |
| idx ++; | |
| } | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| set_bit(BIO_UPTODATE, &bio->bi_flags); | |
| return 1; | |
| } | |
| static int process_checks(r1bio_t *r1_bio) | |
| { | |
| /* We have read all readable devices. If we haven't | |
| * got the block, then there is no hope left. | |
| * If we have, then we want to do a comparison | |
| * and skip the write if everything is the same. | |
| * If any blocks failed to read, then we need to | |
| * attempt an over-write | |
| */ | |
| mddev_t *mddev = r1_bio->mddev; | |
| conf_t *conf = mddev->private; | |
| int primary; | |
| int i; | |
| for (primary = 0; primary < conf->raid_disks; primary++) | |
| if (r1_bio->bios[primary]->bi_end_io == end_sync_read && | |
| test_bit(BIO_UPTODATE, &r1_bio->bios[primary]->bi_flags)) { | |
| r1_bio->bios[primary]->bi_end_io = NULL; | |
| rdev_dec_pending(conf->mirrors[primary].rdev, mddev); | |
| break; | |
| } | |
| r1_bio->read_disk = primary; | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| int j; | |
| int vcnt = r1_bio->sectors >> (PAGE_SHIFT- 9); | |
| struct bio *pbio = r1_bio->bios[primary]; | |
| struct bio *sbio = r1_bio->bios[i]; | |
| int size; | |
| if (r1_bio->bios[i]->bi_end_io != end_sync_read) | |
| continue; | |
| if (test_bit(BIO_UPTODATE, &sbio->bi_flags)) { | |
| for (j = vcnt; j-- ; ) { | |
| struct page *p, *s; | |
| p = pbio->bi_io_vec[j].bv_page; | |
| s = sbio->bi_io_vec[j].bv_page; | |
| if (memcmp(page_address(p), | |
| page_address(s), | |
| PAGE_SIZE)) | |
| break; | |
| } | |
| } else | |
| j = 0; | |
| if (j >= 0) | |
| mddev->resync_mismatches += r1_bio->sectors; | |
| if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery) | |
| && test_bit(BIO_UPTODATE, &sbio->bi_flags))) { | |
| /* No need to write to this device. */ | |
| sbio->bi_end_io = NULL; | |
| rdev_dec_pending(conf->mirrors[i].rdev, mddev); | |
| continue; | |
| } | |
| /* fixup the bio for reuse */ | |
| sbio->bi_vcnt = vcnt; | |
| sbio->bi_size = r1_bio->sectors << 9; | |
| sbio->bi_idx = 0; | |
| sbio->bi_phys_segments = 0; | |
| sbio->bi_flags &= ~(BIO_POOL_MASK - 1); | |
| sbio->bi_flags |= 1 << BIO_UPTODATE; | |
| sbio->bi_next = NULL; | |
| sbio->bi_sector = r1_bio->sector + | |
| conf->mirrors[i].rdev->data_offset; | |
| sbio->bi_bdev = conf->mirrors[i].rdev->bdev; | |
| size = sbio->bi_size; | |
| for (j = 0; j < vcnt ; j++) { | |
| struct bio_vec *bi; | |
| bi = &sbio->bi_io_vec[j]; | |
| bi->bv_offset = 0; | |
| if (size > PAGE_SIZE) | |
| bi->bv_len = PAGE_SIZE; | |
| else | |
| bi->bv_len = size; | |
| size -= PAGE_SIZE; | |
| memcpy(page_address(bi->bv_page), | |
| page_address(pbio->bi_io_vec[j].bv_page), | |
| PAGE_SIZE); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) | |
| { | |
| conf_t *conf = mddev->private; | |
| int i; | |
| int disks = conf->raid_disks; | |
| struct bio *bio, *wbio; | |
| bio = r1_bio->bios[r1_bio->read_disk]; | |
| if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) | |
| /* ouch - failed to read all of that. */ | |
| if (!fix_sync_read_error(r1_bio)) | |
| return; | |
| if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) | |
| if (process_checks(r1_bio) < 0) | |
| return; | |
| /* | |
| * schedule writes | |
| */ | |
| atomic_set(&r1_bio->remaining, 1); | |
| for (i = 0; i < disks ; i++) { | |
| wbio = r1_bio->bios[i]; | |
| if (wbio->bi_end_io == NULL || | |
| (wbio->bi_end_io == end_sync_read && | |
| (i == r1_bio->read_disk || | |
| !test_bit(MD_RECOVERY_SYNC, &mddev->recovery)))) | |
| continue; | |
| wbio->bi_rw = WRITE; | |
| wbio->bi_end_io = end_sync_write; | |
| atomic_inc(&r1_bio->remaining); | |
| md_sync_acct(conf->mirrors[i].rdev->bdev, wbio->bi_size >> 9); | |
| generic_make_request(wbio); | |
| } | |
| if (atomic_dec_and_test(&r1_bio->remaining)) { | |
| /* if we're here, all write(s) have completed, so clean up */ | |
| md_done_sync(mddev, r1_bio->sectors, 1); | |
| put_buf(r1_bio); | |
| } | |
| } | |
| /* | |
| * This is a kernel thread which: | |
| * | |
| * 1. Retries failed read operations on working mirrors. | |
| * 2. Updates the raid superblock when problems encounter. | |
| * 3. Performs writes following reads for array synchronising. | |
| */ | |
| static void fix_read_error(conf_t *conf, int read_disk, | |
| sector_t sect, int sectors) | |
| { | |
| mddev_t *mddev = conf->mddev; | |
| while(sectors) { | |
| int s = sectors; | |
| int d = read_disk; | |
| int success = 0; | |
| int start; | |
| mdk_rdev_t *rdev; | |
| if (s > (PAGE_SIZE>>9)) | |
| s = PAGE_SIZE >> 9; | |
| do { | |
| /* Note: no rcu protection needed here | |
| * as this is synchronous in the raid1d thread | |
| * which is the thread that might remove | |
| * a device. If raid1d ever becomes multi-threaded.... | |
| */ | |
| sector_t first_bad; | |
| int bad_sectors; | |
| rdev = conf->mirrors[d].rdev; | |
| if (rdev && | |
| test_bit(In_sync, &rdev->flags) && | |
| is_badblock(rdev, sect, s, | |
| &first_bad, &bad_sectors) == 0 && | |
| sync_page_io(rdev, sect, s<<9, | |
| conf->tmppage, READ, false)) | |
| success = 1; | |
| else { | |
| d++; | |
| if (d == conf->raid_disks) | |
| d = 0; | |
| } | |
| } while (!success && d != read_disk); | |
| if (!success) { | |
| /* Cannot read from anywhere - mark it bad */ | |
| mdk_rdev_t *rdev = conf->mirrors[read_disk].rdev; | |
| if (!rdev_set_badblocks(rdev, sect, s, 0)) | |
| md_error(mddev, rdev); | |
| break; | |
| } | |
| /* write it back and re-read */ | |
| start = d; | |
| while (d != read_disk) { | |
| if (d==0) | |
| d = conf->raid_disks; | |
| d--; | |
| rdev = conf->mirrors[d].rdev; | |
| if (rdev && | |
| test_bit(In_sync, &rdev->flags)) | |
| r1_sync_page_io(rdev, sect, s, | |
| conf->tmppage, WRITE); | |
| } | |
| d = start; | |
| while (d != read_disk) { | |
| char b[BDEVNAME_SIZE]; | |
| if (d==0) | |
| d = conf->raid_disks; | |
| d--; | |
| rdev = conf->mirrors[d].rdev; | |
| if (rdev && | |
| test_bit(In_sync, &rdev->flags)) { | |
| if (r1_sync_page_io(rdev, sect, s, | |
| conf->tmppage, READ)) { | |
| atomic_add(s, &rdev->corrected_errors); | |
| printk(KERN_INFO | |
| "md/raid1:%s: read error corrected " | |
| "(%d sectors at %llu on %s)\n", | |
| mdname(mddev), s, | |
| (unsigned long long)(sect + | |
| rdev->data_offset), | |
| bdevname(rdev->bdev, b)); | |
| } | |
| } | |
| } | |
| sectors -= s; | |
| sect += s; | |
| } | |
| } | |
| static void bi_complete(struct bio *bio, int error) | |
| { | |
| complete((struct completion *)bio->bi_private); | |
| } | |
| static int submit_bio_wait(int rw, struct bio *bio) | |
| { | |
| struct completion event; | |
| rw |= REQ_SYNC; | |
| init_completion(&event); | |
| bio->bi_private = &event; | |
| bio->bi_end_io = bi_complete; | |
| submit_bio(rw, bio); | |
| wait_for_completion(&event); | |
| return test_bit(BIO_UPTODATE, &bio->bi_flags); | |
| } | |
| static int narrow_write_error(r1bio_t *r1_bio, int i) | |
| { | |
| mddev_t *mddev = r1_bio->mddev; | |
| conf_t *conf = mddev->private; | |
| mdk_rdev_t *rdev = conf->mirrors[i].rdev; | |
| int vcnt, idx; | |
| struct bio_vec *vec; | |
| /* bio has the data to be written to device 'i' where | |
| * we just recently had a write error. | |
| * We repeatedly clone the bio and trim down to one block, | |
| * then try the write. Where the write fails we record | |
| * a bad block. | |
| * It is conceivable that the bio doesn't exactly align with | |
| * blocks. We must handle this somehow. | |
| * | |
| * We currently own a reference on the rdev. | |
| */ | |
| int block_sectors; | |
| sector_t sector; | |
| int sectors; | |
| int sect_to_write = r1_bio->sectors; | |
| int ok = 1; | |
| if (rdev->badblocks.shift < 0) | |
| return 0; | |
| block_sectors = 1 << rdev->badblocks.shift; | |
| sector = r1_bio->sector; | |
| sectors = ((sector + block_sectors) | |
| & ~(sector_t)(block_sectors - 1)) | |
| - sector; | |
| if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { | |
| vcnt = r1_bio->behind_page_count; | |
| vec = r1_bio->behind_bvecs; | |
| idx = 0; | |
| while (vec[idx].bv_page == NULL) | |
| idx++; | |
| } else { | |
| vcnt = r1_bio->master_bio->bi_vcnt; | |
| vec = r1_bio->master_bio->bi_io_vec; | |
| idx = r1_bio->master_bio->bi_idx; | |
| } | |
| while (sect_to_write) { | |
| struct bio *wbio; | |
| if (sectors > sect_to_write) | |
| sectors = sect_to_write; | |
| /* Write at 'sector' for 'sectors'*/ | |
| wbio = bio_alloc_mddev(GFP_NOIO, vcnt, mddev); | |
| memcpy(wbio->bi_io_vec, vec, vcnt * sizeof(struct bio_vec)); | |
| wbio->bi_sector = r1_bio->sector; | |
| wbio->bi_rw = WRITE; | |
| wbio->bi_vcnt = vcnt; | |
| wbio->bi_size = r1_bio->sectors << 9; | |
| wbio->bi_idx = idx; | |
| md_trim_bio(wbio, sector - r1_bio->sector, sectors); | |
| wbio->bi_sector += rdev->data_offset; | |
| wbio->bi_bdev = rdev->bdev; | |
| if (submit_bio_wait(WRITE, wbio) == 0) | |
| /* failure! */ | |
| ok = rdev_set_badblocks(rdev, sector, | |
| sectors, 0) | |
| && ok; | |
| bio_put(wbio); | |
| sect_to_write -= sectors; | |
| sector += sectors; | |
| sectors = block_sectors; | |
| } | |
| return ok; | |
| } | |
| static void handle_sync_write_finished(conf_t *conf, r1bio_t *r1_bio) | |
| { | |
| int m; | |
| int s = r1_bio->sectors; | |
| for (m = 0; m < conf->raid_disks ; m++) { | |
| mdk_rdev_t *rdev = conf->mirrors[m].rdev; | |
| struct bio *bio = r1_bio->bios[m]; | |
| if (bio->bi_end_io == NULL) | |
| continue; | |
| if (test_bit(BIO_UPTODATE, &bio->bi_flags) && | |
| test_bit(R1BIO_MadeGood, &r1_bio->state)) { | |
| rdev_clear_badblocks(rdev, r1_bio->sector, s); | |
| } | |
| if (!test_bit(BIO_UPTODATE, &bio->bi_flags) && | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) { | |
| if (!rdev_set_badblocks(rdev, r1_bio->sector, s, 0)) | |
| md_error(conf->mddev, rdev); | |
| } | |
| } | |
| put_buf(r1_bio); | |
| md_done_sync(conf->mddev, s, 1); | |
| } | |
| static void handle_write_finished(conf_t *conf, r1bio_t *r1_bio) | |
| { | |
| int m; | |
| for (m = 0; m < conf->raid_disks ; m++) | |
| if (r1_bio->bios[m] == IO_MADE_GOOD) { | |
| mdk_rdev_t *rdev = conf->mirrors[m].rdev; | |
| rdev_clear_badblocks(rdev, | |
| r1_bio->sector, | |
| r1_bio->sectors); | |
| rdev_dec_pending(rdev, conf->mddev); | |
| } else if (r1_bio->bios[m] != NULL) { | |
| /* This drive got a write error. We need to | |
| * narrow down and record precise write | |
| * errors. | |
| */ | |
| if (!narrow_write_error(r1_bio, m)) { | |
| md_error(conf->mddev, | |
| conf->mirrors[m].rdev); | |
| /* an I/O failed, we can't clear the bitmap */ | |
| set_bit(R1BIO_Degraded, &r1_bio->state); | |
| } | |
| rdev_dec_pending(conf->mirrors[m].rdev, | |
| conf->mddev); | |
| } | |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| close_write(r1_bio); | |
| raid_end_bio_io(r1_bio); | |
| } | |
| static void handle_read_error(conf_t *conf, r1bio_t *r1_bio) | |
| { | |
| int disk; | |
| int max_sectors; | |
| mddev_t *mddev = conf->mddev; | |
| struct bio *bio; | |
| char b[BDEVNAME_SIZE]; | |
| mdk_rdev_t *rdev; | |
| clear_bit(R1BIO_ReadError, &r1_bio->state); | |
| /* we got a read error. Maybe the drive is bad. Maybe just | |
| * the block and we can fix it. | |
| * We freeze all other IO, and try reading the block from | |
| * other devices. When we find one, we re-write | |
| * and check it that fixes the read error. | |
| * This is all done synchronously while the array is | |
| * frozen | |
| */ | |
| if (mddev->ro == 0) { | |
| freeze_array(conf); | |
| fix_read_error(conf, r1_bio->read_disk, | |
| r1_bio->sector, r1_bio->sectors); | |
| unfreeze_array(conf); | |
| } else | |
| md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev); | |
| bio = r1_bio->bios[r1_bio->read_disk]; | |
| bdevname(bio->bi_bdev, b); | |
| read_more: | |
| disk = read_balance(conf, r1_bio, &max_sectors); | |
| if (disk == -1) { | |
| printk(KERN_ALERT "md/raid1:%s: %s: unrecoverable I/O" | |
| " read error for block %llu\n", | |
| mdname(mddev), b, (unsigned long long)r1_bio->sector); | |
| raid_end_bio_io(r1_bio); | |
| } else { | |
| const unsigned long do_sync | |
| = r1_bio->master_bio->bi_rw & REQ_SYNC; | |
| if (bio) { | |
| r1_bio->bios[r1_bio->read_disk] = | |
| mddev->ro ? IO_BLOCKED : NULL; | |
| bio_put(bio); | |
| } | |
| r1_bio->read_disk = disk; | |
| bio = bio_clone_mddev(r1_bio->master_bio, GFP_NOIO, mddev); | |
| md_trim_bio(bio, r1_bio->sector - bio->bi_sector, max_sectors); | |
| r1_bio->bios[r1_bio->read_disk] = bio; | |
| rdev = conf->mirrors[disk].rdev; | |
| printk_ratelimited(KERN_ERR | |
| "md/raid1:%s: redirecting sector %llu" | |
| " to other mirror: %s\n", | |
| mdname(mddev), | |
| (unsigned long long)r1_bio->sector, | |
| bdevname(rdev->bdev, b)); | |
| bio->bi_sector = r1_bio->sector + rdev->data_offset; | |
| bio->bi_bdev = rdev->bdev; | |
| bio->bi_end_io = raid1_end_read_request; | |
| bio->bi_rw = READ | do_sync; | |
| bio->bi_private = r1_bio; | |
| if (max_sectors < r1_bio->sectors) { | |
| /* Drat - have to split this up more */ | |
| struct bio *mbio = r1_bio->master_bio; | |
| int sectors_handled = (r1_bio->sector + max_sectors | |
| - mbio->bi_sector); | |
| r1_bio->sectors = max_sectors; | |
| spin_lock_irq(&conf->device_lock); | |
| if (mbio->bi_phys_segments == 0) | |
| mbio->bi_phys_segments = 2; | |
| else | |
| mbio->bi_phys_segments++; | |
| spin_unlock_irq(&conf->device_lock); | |
| generic_make_request(bio); | |
| bio = NULL; | |
| r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); | |
| r1_bio->master_bio = mbio; | |
| r1_bio->sectors = (mbio->bi_size >> 9) | |
| - sectors_handled; | |
| r1_bio->state = 0; | |
| set_bit(R1BIO_ReadError, &r1_bio->state); | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = mbio->bi_sector + sectors_handled; | |
| goto read_more; | |
| } else | |
| generic_make_request(bio); | |
| } | |
| } | |
| static void raid1d(mddev_t *mddev) | |
| { | |
| r1bio_t *r1_bio; | |
| unsigned long flags; | |
| conf_t *conf = mddev->private; | |
| struct list_head *head = &conf->retry_list; | |
| struct blk_plug plug; | |
| md_check_recovery(mddev); | |
| blk_start_plug(&plug); | |
| for (;;) { | |
| if (atomic_read(&mddev->plug_cnt) == 0) | |
| flush_pending_writes(conf); | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (list_empty(head)) { | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| break; | |
| } | |
| r1_bio = list_entry(head->prev, r1bio_t, retry_list); | |
| list_del(head->prev); | |
| conf->nr_queued--; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| mddev = r1_bio->mddev; | |
| conf = mddev->private; | |
| if (test_bit(R1BIO_IsSync, &r1_bio->state)) { | |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state) || | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| handle_sync_write_finished(conf, r1_bio); | |
| else | |
| sync_request_write(mddev, r1_bio); | |
| } else if (test_bit(R1BIO_MadeGood, &r1_bio->state) || | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| handle_write_finished(conf, r1_bio); | |
| else if (test_bit(R1BIO_ReadError, &r1_bio->state)) | |
| handle_read_error(conf, r1_bio); | |
| else | |
| /* just a partial read to be scheduled from separate | |
| * context | |
| */ | |
| generic_make_request(r1_bio->bios[r1_bio->read_disk]); | |
| cond_resched(); | |
| if (mddev->flags & ~(1<<MD_CHANGE_PENDING)) | |
| md_check_recovery(mddev); | |
| } | |
| blk_finish_plug(&plug); | |
| } | |
| static int init_resync(conf_t *conf) | |
| { | |
| int buffs; | |
| buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE; | |
| BUG_ON(conf->r1buf_pool); | |
| conf->r1buf_pool = mempool_create(buffs, r1buf_pool_alloc, r1buf_pool_free, | |
| conf->poolinfo); | |
| if (!conf->r1buf_pool) | |
| return -ENOMEM; | |
| conf->next_resync = 0; | |
| return 0; | |
| } | |
| /* | |
| * perform a "sync" on one "block" | |
| * | |
| * We need to make sure that no normal I/O request - particularly write | |
| * requests - conflict with active sync requests. | |
| * | |
| * This is achieved by tracking pending requests and a 'barrier' concept | |
| * that can be installed to exclude normal IO requests. | |
| */ | |
| static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, int go_faster) | |
| { | |
| conf_t *conf = mddev->private; | |
| r1bio_t *r1_bio; | |
| struct bio *bio; | |
| sector_t max_sector, nr_sectors; | |
| int disk = -1; | |
| int i; | |
| int wonly = -1; | |
| int write_targets = 0, read_targets = 0; | |
| sector_t sync_blocks; | |
| int still_degraded = 0; | |
| int good_sectors = RESYNC_SECTORS; | |
| int min_bad = 0; /* number of sectors that are bad in all devices */ | |
| if (!conf->r1buf_pool) | |
| if (init_resync(conf)) | |
| return 0; | |
| max_sector = mddev->dev_sectors; | |
| if (sector_nr >= max_sector) { | |
| /* If we aborted, we need to abort the | |
| * sync on the 'current' bitmap chunk (there will | |
| * only be one in raid1 resync. | |
| * We can find the current addess in mddev->curr_resync | |
| */ | |
| if (mddev->curr_resync < max_sector) /* aborted */ | |
| bitmap_end_sync(mddev->bitmap, mddev->curr_resync, | |
| &sync_blocks, 1); | |
| else /* completed sync */ | |
| conf->fullsync = 0; | |
| bitmap_close_sync(mddev->bitmap); | |
| close_sync(conf); | |
| return 0; | |
| } | |
| if (mddev->bitmap == NULL && | |
| mddev->recovery_cp == MaxSector && | |
| !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) && | |
| conf->fullsync == 0) { | |
| *skipped = 1; | |
| return max_sector - sector_nr; | |
| } | |
| /* before building a request, check if we can skip these blocks.. | |
| * This call the bitmap_start_sync doesn't actually record anything | |
| */ | |
| if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) && | |
| !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { | |
| /* We can skip this block, and probably several more */ | |
| *skipped = 1; | |
| return sync_blocks; | |
| } | |
| /* | |
| * If there is non-resync activity waiting for a turn, | |
| * and resync is going fast enough, | |
| * then let it though before starting on this new sync request. | |
| */ | |
| if (!go_faster && conf->nr_waiting) | |
| msleep_interruptible(1000); | |
| bitmap_cond_end_sync(mddev->bitmap, sector_nr); | |
| r1_bio = mempool_alloc(conf->r1buf_pool, GFP_NOIO); | |
| raise_barrier(conf); | |
| conf->next_resync = sector_nr; | |
| rcu_read_lock(); | |
| /* | |
| * If we get a correctably read error during resync or recovery, | |
| * we might want to read from a different device. So we | |
| * flag all drives that could conceivably be read from for READ, | |
| * and any others (which will be non-In_sync devices) for WRITE. | |
| * If a read fails, we try reading from something else for which READ | |
| * is OK. | |
| */ | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = sector_nr; | |
| r1_bio->state = 0; | |
| set_bit(R1BIO_IsSync, &r1_bio->state); | |
| for (i=0; i < conf->raid_disks; i++) { | |
| mdk_rdev_t *rdev; | |
| bio = r1_bio->bios[i]; | |
| /* take from bio_init */ | |
| bio->bi_next = NULL; | |
| bio->bi_flags &= ~(BIO_POOL_MASK-1); | |
| bio->bi_flags |= 1 << BIO_UPTODATE; | |
| bio->bi_comp_cpu = -1; | |
| bio->bi_rw = READ; | |
| bio->bi_vcnt = 0; | |
| bio->bi_idx = 0; | |
| bio->bi_phys_segments = 0; | |
| bio->bi_size = 0; | |
| bio->bi_end_io = NULL; | |
| bio->bi_private = NULL; | |
| rdev = rcu_dereference(conf->mirrors[i].rdev); | |
| if (rdev == NULL || | |
| test_bit(Faulty, &rdev->flags)) { | |
| still_degraded = 1; | |
| } else if (!test_bit(In_sync, &rdev->flags)) { | |
| bio->bi_rw = WRITE; | |
| bio->bi_end_io = end_sync_write; | |
| write_targets ++; | |
| } else { | |
| /* may need to read from here */ | |
| sector_t first_bad = MaxSector; | |
| int bad_sectors; | |
| if (is_badblock(rdev, sector_nr, good_sectors, | |
| &first_bad, &bad_sectors)) { | |
| if (first_bad > sector_nr) | |
| good_sectors = first_bad - sector_nr; | |
| else { | |
| bad_sectors -= (sector_nr - first_bad); | |
| if (min_bad == 0 || | |
| min_bad > bad_sectors) | |
| min_bad = bad_sectors; | |
| } | |
| } | |
| if (sector_nr < first_bad) { | |
| if (test_bit(WriteMostly, &rdev->flags)) { | |
| if (wonly < 0) | |
| wonly = i; | |
| } else { | |
| if (disk < 0) | |
| disk = i; | |
| } | |
| bio->bi_rw = READ; | |
| bio->bi_end_io = end_sync_read; | |
| read_targets++; | |
| } | |
| } | |
| if (bio->bi_end_io) { | |
| atomic_inc(&rdev->nr_pending); | |
| bio->bi_sector = sector_nr + rdev->data_offset; | |
| bio->bi_bdev = rdev->bdev; | |
| bio->bi_private = r1_bio; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| if (disk < 0) | |
| disk = wonly; | |
| r1_bio->read_disk = disk; | |
| if (read_targets == 0 && min_bad > 0) { | |
| /* These sectors are bad on all InSync devices, so we | |
| * need to mark them bad on all write targets | |
| */ | |
| int ok = 1; | |
| for (i = 0 ; i < conf->raid_disks ; i++) | |
| if (r1_bio->bios[i]->bi_end_io == end_sync_write) { | |
| mdk_rdev_t *rdev = | |
| rcu_dereference(conf->mirrors[i].rdev); | |
| ok = rdev_set_badblocks(rdev, sector_nr, | |
| min_bad, 0 | |
| ) && ok; | |
| } | |
| set_bit(MD_CHANGE_DEVS, &mddev->flags); | |
| *skipped = 1; | |
| put_buf(r1_bio); | |
| if (!ok) { | |
| /* Cannot record the badblocks, so need to | |
| * abort the resync. | |
| * If there are multiple read targets, could just | |
| * fail the really bad ones ??? | |
| */ | |
| conf->recovery_disabled = mddev->recovery_disabled; | |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); | |
| return 0; | |
| } else | |
| return min_bad; | |
| } | |
| if (min_bad > 0 && min_bad < good_sectors) { | |
| /* only resync enough to reach the next bad->good | |
| * transition */ | |
| good_sectors = min_bad; | |
| } | |
| if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && read_targets > 0) | |
| /* extra read targets are also write targets */ | |
| write_targets += read_targets-1; | |
| if (write_targets == 0 || read_targets == 0) { | |
| /* There is nowhere to write, so all non-sync | |
| * drives must be failed - so we are finished | |
| */ | |
| sector_t rv = max_sector - sector_nr; | |
| *skipped = 1; | |
| put_buf(r1_bio); | |
| return rv; | |
| } | |
| if (max_sector > mddev->resync_max) | |
| max_sector = mddev->resync_max; /* Don't do IO beyond here */ | |
| if (max_sector > sector_nr + good_sectors) | |
| max_sector = sector_nr + good_sectors; | |
| nr_sectors = 0; | |
| sync_blocks = 0; | |
| do { | |
| struct page *page; | |
| int len = PAGE_SIZE; | |
| if (sector_nr + (len>>9) > max_sector) | |
| len = (max_sector - sector_nr) << 9; | |
| if (len == 0) | |
| break; | |
| if (sync_blocks == 0) { | |
| if (!bitmap_start_sync(mddev->bitmap, sector_nr, | |
| &sync_blocks, still_degraded) && | |
| !conf->fullsync && | |
| !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) | |
| break; | |
| BUG_ON(sync_blocks < (PAGE_SIZE>>9)); | |
| if ((len >> 9) > sync_blocks) | |
| len = sync_blocks<<9; | |
| } | |
| for (i=0 ; i < conf->raid_disks; i++) { | |
| bio = r1_bio->bios[i]; | |
| if (bio->bi_end_io) { | |
| page = bio->bi_io_vec[bio->bi_vcnt].bv_page; | |
| if (bio_add_page(bio, page, len, 0) == 0) { | |
| /* stop here */ | |
| bio->bi_io_vec[bio->bi_vcnt].bv_page = page; | |
| while (i > 0) { | |
| i--; | |
| bio = r1_bio->bios[i]; | |
| if (bio->bi_end_io==NULL) | |
| continue; | |
| /* remove last page from this bio */ | |
| bio->bi_vcnt--; | |
| bio->bi_size -= len; | |
| bio->bi_flags &= ~(1<< BIO_SEG_VALID); | |
| } | |
| goto bio_full; | |
| } | |
| } | |
| } | |
| nr_sectors += len>>9; | |
| sector_nr += len>>9; | |
| sync_blocks -= (len>>9); | |
| } while (r1_bio->bios[disk]->bi_vcnt < RESYNC_PAGES); | |
| bio_full: | |
| r1_bio->sectors = nr_sectors; | |
| /* For a user-requested sync, we read all readable devices and do a | |
| * compare | |
| */ | |
| if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { | |
| atomic_set(&r1_bio->remaining, read_targets); | |
| for (i=0; i<conf->raid_disks; i++) { | |
| bio = r1_bio->bios[i]; | |
| if (bio->bi_end_io == end_sync_read) { | |
| md_sync_acct(bio->bi_bdev, nr_sectors); | |
| generic_make_request(bio); | |
| } | |
| } | |
| } else { | |
| atomic_set(&r1_bio->remaining, 1); | |
| bio = r1_bio->bios[r1_bio->read_disk]; | |
| md_sync_acct(bio->bi_bdev, nr_sectors); | |
| generic_make_request(bio); | |
| } | |
| return nr_sectors; | |
| } | |
| static sector_t raid1_size(mddev_t *mddev, sector_t sectors, int raid_disks) | |
| { | |
| if (sectors) | |
| return sectors; | |
| return mddev->dev_sectors; | |
| } | |
| static conf_t *setup_conf(mddev_t *mddev) | |
| { | |
| conf_t *conf; | |
| int i; | |
| mirror_info_t *disk; | |
| mdk_rdev_t *rdev; | |
| int err = -ENOMEM; | |
| conf = kzalloc(sizeof(conf_t), GFP_KERNEL); | |
| if (!conf) | |
| goto abort; | |
| conf->mirrors = kzalloc(sizeof(struct mirror_info)*mddev->raid_disks, | |
| GFP_KERNEL); | |
| if (!conf->mirrors) | |
| goto abort; | |
| conf->tmppage = alloc_page(GFP_KERNEL); | |
| if (!conf->tmppage) | |
| goto abort; | |
| conf->poolinfo = kzalloc(sizeof(*conf->poolinfo), GFP_KERNEL); | |
| if (!conf->poolinfo) | |
| goto abort; | |
| conf->poolinfo->raid_disks = mddev->raid_disks; | |
| conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc, | |
| r1bio_pool_free, | |
| conf->poolinfo); | |
| if (!conf->r1bio_pool) | |
| goto abort; | |
| conf->poolinfo->mddev = mddev; | |
| spin_lock_init(&conf->device_lock); | |
| list_for_each_entry(rdev, &mddev->disks, same_set) { | |
| int disk_idx = rdev->raid_disk; | |
| if (disk_idx >= mddev->raid_disks | |
| || disk_idx < 0) | |
| continue; | |
| disk = conf->mirrors + disk_idx; | |
| disk->rdev = rdev; | |
| disk->head_position = 0; | |
| } | |
| conf->raid_disks = mddev->raid_disks; | |
| conf->mddev = mddev; | |
| INIT_LIST_HEAD(&conf->retry_list); | |
| spin_lock_init(&conf->resync_lock); | |
| init_waitqueue_head(&conf->wait_barrier); | |
| bio_list_init(&conf->pending_bio_list); | |
| conf->last_used = -1; | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| disk = conf->mirrors + i; | |
| if (!disk->rdev || | |
| !test_bit(In_sync, &disk->rdev->flags)) { | |
| disk->head_position = 0; | |
| if (disk->rdev) | |
| conf->fullsync = 1; | |
| } else if (conf->last_used < 0) | |
| /* | |
| * The first working device is used as a | |
| * starting point to read balancing. | |
| */ | |
| conf->last_used = i; | |
| } | |
| err = -EIO; | |
| if (conf->last_used < 0) { | |
| printk(KERN_ERR "md/raid1:%s: no operational mirrors\n", | |
| mdname(mddev)); | |
| goto abort; | |
| } | |
| err = -ENOMEM; | |
| conf->thread = md_register_thread(raid1d, mddev, NULL); | |
| if (!conf->thread) { | |
| printk(KERN_ERR | |
| "md/raid1:%s: couldn't allocate thread\n", | |
| mdname(mddev)); | |
| goto abort; | |
| } | |
| return conf; | |
| abort: | |
| if (conf) { | |
| if (conf->r1bio_pool) | |
| mempool_destroy(conf->r1bio_pool); | |
| kfree(conf->mirrors); | |
| safe_put_page(conf->tmppage); | |
| kfree(conf->poolinfo); | |
| kfree(conf); | |
| } | |
| return ERR_PTR(err); | |
| } | |
| static int run(mddev_t *mddev) | |
| { | |
| conf_t *conf; | |
| int i; | |
| mdk_rdev_t *rdev; | |
| if (mddev->level != 1) { | |
| printk(KERN_ERR "md/raid1:%s: raid level not set to mirroring (%d)\n", | |
| mdname(mddev), mddev->level); | |
| return -EIO; | |
| } | |
| if (mddev->reshape_position != MaxSector) { | |
| printk(KERN_ERR "md/raid1:%s: reshape_position set but not supported\n", | |
| mdname(mddev)); | |
| return -EIO; | |
| } | |
| /* | |
| * copy the already verified devices into our private RAID1 | |
| * bookkeeping area. [whatever we allocate in run(), | |
| * should be freed in stop()] | |
| */ | |
| if (mddev->private == NULL) | |
| conf = setup_conf(mddev); | |
| else | |
| conf = mddev->private; | |
| if (IS_ERR(conf)) | |
| return PTR_ERR(conf); | |
| list_for_each_entry(rdev, &mddev->disks, same_set) { | |
| if (!mddev->gendisk) | |
| continue; | |
| disk_stack_limits(mddev->gendisk, rdev->bdev, | |
| rdev->data_offset << 9); | |
| /* as we don't honour merge_bvec_fn, we must never risk | |
| * violating it, so limit ->max_segments to 1 lying within | |
| * a single page, as a one page request is never in violation. | |
| */ | |
| if (rdev->bdev->bd_disk->queue->merge_bvec_fn) { | |
| blk_queue_max_segments(mddev->queue, 1); | |
| blk_queue_segment_boundary(mddev->queue, | |
| PAGE_CACHE_SIZE - 1); | |
| } | |
| } | |
| mddev->degraded = 0; | |
| for (i=0; i < conf->raid_disks; i++) | |
| if (conf->mirrors[i].rdev == NULL || | |
| !test_bit(In_sync, &conf->mirrors[i].rdev->flags) || | |
| test_bit(Faulty, &conf->mirrors[i].rdev->flags)) | |
| mddev->degraded++; | |
| if (conf->raid_disks - mddev->degraded == 1) | |
| mddev->recovery_cp = MaxSector; | |
| if (mddev->recovery_cp != MaxSector) | |
| printk(KERN_NOTICE "md/raid1:%s: not clean" | |
| " -- starting background reconstruction\n", | |
| mdname(mddev)); | |
| printk(KERN_INFO | |
| "md/raid1:%s: active with %d out of %d mirrors\n", | |
| mdname(mddev), mddev->raid_disks - mddev->degraded, | |
| mddev->raid_disks); | |
| /* | |
| * Ok, everything is just fine now | |
| */ | |
| mddev->thread = conf->thread; | |
| conf->thread = NULL; | |
| mddev->private = conf; | |
| md_set_array_sectors(mddev, raid1_size(mddev, 0, 0)); | |
| if (mddev->queue) { | |
| mddev->queue->backing_dev_info.congested_fn = raid1_congested; | |
| mddev->queue->backing_dev_info.congested_data = mddev; | |
| } | |
| return md_integrity_register(mddev); | |
| } | |
| static int stop(mddev_t *mddev) | |
| { | |
| conf_t *conf = mddev->private; | |
| struct bitmap *bitmap = mddev->bitmap; | |
| /* wait for behind writes to complete */ | |
| if (bitmap && atomic_read(&bitmap->behind_writes) > 0) { | |
| printk(KERN_INFO "md/raid1:%s: behind writes in progress - waiting to stop.\n", | |
| mdname(mddev)); | |
| /* need to kick something here to make sure I/O goes? */ | |
| wait_event(bitmap->behind_wait, | |
| atomic_read(&bitmap->behind_writes) == 0); | |
| } | |
| raise_barrier(conf); | |
| lower_barrier(conf); | |
| md_unregister_thread(mddev->thread); | |
| mddev->thread = NULL; | |
| if (conf->r1bio_pool) | |
| mempool_destroy(conf->r1bio_pool); | |
| kfree(conf->mirrors); | |
| kfree(conf->poolinfo); | |
| kfree(conf); | |
| mddev->private = NULL; | |
| return 0; | |
| } | |
| static int raid1_resize(mddev_t *mddev, sector_t sectors) | |
| { | |
| /* no resync is happening, and there is enough space | |
| * on all devices, so we can resize. | |
| * We need to make sure resync covers any new space. | |
| * If the array is shrinking we should possibly wait until | |
| * any io in the removed space completes, but it hardly seems | |
| * worth it. | |
| */ | |
| md_set_array_sectors(mddev, raid1_size(mddev, sectors, 0)); | |
| if (mddev->array_sectors > raid1_size(mddev, sectors, 0)) | |
| return -EINVAL; | |
| set_capacity(mddev->gendisk, mddev->array_sectors); | |
| revalidate_disk(mddev->gendisk); | |
| if (sectors > mddev->dev_sectors && | |
| mddev->recovery_cp > mddev->dev_sectors) { | |
| mddev->recovery_cp = mddev->dev_sectors; | |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); | |
| } | |
| mddev->dev_sectors = sectors; | |
| mddev->resync_max_sectors = sectors; | |
| return 0; | |
| } | |
| static int raid1_reshape(mddev_t *mddev) | |
| { | |
| /* We need to: | |
| * 1/ resize the r1bio_pool | |
| * 2/ resize conf->mirrors | |
| * | |
| * We allocate a new r1bio_pool if we can. | |
| * Then raise a device barrier and wait until all IO stops. | |
| * Then resize conf->mirrors and swap in the new r1bio pool. | |
| * | |
| * At the same time, we "pack" the devices so that all the missing | |
| * devices have the higher raid_disk numbers. | |
| */ | |
| mempool_t *newpool, *oldpool; | |
| struct pool_info *newpoolinfo; | |
| mirror_info_t *newmirrors; | |
| conf_t *conf = mddev->private; | |
| int cnt, raid_disks; | |
| unsigned long flags; | |
| int d, d2, err; | |
| /* Cannot change chunk_size, layout, or level */ | |
| if (mddev->chunk_sectors != mddev->new_chunk_sectors || | |
| mddev->layout != mddev->new_layout || | |
| mddev->level != mddev->new_level) { | |
| mddev->new_chunk_sectors = mddev->chunk_sectors; | |
| mddev->new_layout = mddev->layout; | |
| mddev->new_level = mddev->level; | |
| return -EINVAL; | |
| } | |
| err = md_allow_write(mddev); | |
| if (err) | |
| return err; | |
| raid_disks = mddev->raid_disks + mddev->delta_disks; | |
| if (raid_disks < conf->raid_disks) { | |
| cnt=0; | |
| for (d= 0; d < conf->raid_disks; d++) | |
| if (conf->mirrors[d].rdev) | |
| cnt++; | |
| if (cnt > raid_disks) | |
| return -EBUSY; | |
| } | |
| newpoolinfo = kmalloc(sizeof(*newpoolinfo), GFP_KERNEL); | |
| if (!newpoolinfo) | |
| return -ENOMEM; | |
| newpoolinfo->mddev = mddev; | |
| newpoolinfo->raid_disks = raid_disks; | |
| newpool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc, | |
| r1bio_pool_free, newpoolinfo); | |
| if (!newpool) { | |
| kfree(newpoolinfo); | |
| return -ENOMEM; | |
| } | |
| newmirrors = kzalloc(sizeof(struct mirror_info) * raid_disks, GFP_KERNEL); | |
| if (!newmirrors) { | |
| kfree(newpoolinfo); | |
| mempool_destroy(newpool); | |
| return -ENOMEM; | |
| } | |
| raise_barrier(conf); | |
| /* ok, everything is stopped */ | |
| oldpool = conf->r1bio_pool; | |
| conf->r1bio_pool = newpool; | |
| for (d = d2 = 0; d < conf->raid_disks; d++) { | |
| mdk_rdev_t *rdev = conf->mirrors[d].rdev; | |
| if (rdev && rdev->raid_disk != d2) { | |
| sysfs_unlink_rdev(mddev, rdev); | |
| rdev->raid_disk = d2; | |
| sysfs_unlink_rdev(mddev, rdev); | |
| if (sysfs_link_rdev(mddev, rdev)) | |
| printk(KERN_WARNING | |
| "md/raid1:%s: cannot register rd%d\n", | |
| mdname(mddev), rdev->raid_disk); | |
| } | |
| if (rdev) | |
| newmirrors[d2++].rdev = rdev; | |
| } | |
| kfree(conf->mirrors); | |
| conf->mirrors = newmirrors; | |
| kfree(conf->poolinfo); | |
| conf->poolinfo = newpoolinfo; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| mddev->degraded += (raid_disks - conf->raid_disks); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| conf->raid_disks = mddev->raid_disks = raid_disks; | |
| mddev->delta_disks = 0; | |
| conf->last_used = 0; /* just make sure it is in-range */ | |
| lower_barrier(conf); | |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); | |
| md_wakeup_thread(mddev->thread); | |
| mempool_destroy(oldpool); | |
| return 0; | |
| } | |
| static void raid1_quiesce(mddev_t *mddev, int state) | |
| { | |
| conf_t *conf = mddev->private; | |
| switch(state) { | |
| case 2: /* wake for suspend */ | |
| wake_up(&conf->wait_barrier); | |
| break; | |
| case 1: | |
| raise_barrier(conf); | |
| break; | |
| case 0: | |
| lower_barrier(conf); | |
| break; | |
| } | |
| } | |
| static void *raid1_takeover(mddev_t *mddev) | |
| { | |
| /* raid1 can take over: | |
| * raid5 with 2 devices, any layout or chunk size | |
| */ | |
| if (mddev->level == 5 && mddev->raid_disks == 2) { | |
| conf_t *conf; | |
| mddev->new_level = 1; | |
| mddev->new_layout = 0; | |
| mddev->new_chunk_sectors = 0; | |
| conf = setup_conf(mddev); | |
| if (!IS_ERR(conf)) | |
| conf->barrier = 1; | |
| return conf; | |
| } | |
| return ERR_PTR(-EINVAL); | |
| } | |
| static struct mdk_personality raid1_personality = | |
| { | |
| .name = "raid1", | |
| .level = 1, | |
| .owner = THIS_MODULE, | |
| .make_request = make_request, | |
| .run = run, | |
| .stop = stop, | |
| .status = status, | |
| .error_handler = error, | |
| .hot_add_disk = raid1_add_disk, | |
| .hot_remove_disk= raid1_remove_disk, | |
| .spare_active = raid1_spare_active, | |
| .sync_request = sync_request, | |
| .resize = raid1_resize, | |
| .size = raid1_size, | |
| .check_reshape = raid1_reshape, | |
| .quiesce = raid1_quiesce, | |
| .takeover = raid1_takeover, | |
| }; | |
| static int __init raid_init(void) | |
| { | |
| return register_md_personality(&raid1_personality); | |
| } | |
| static void raid_exit(void) | |
| { | |
| unregister_md_personality(&raid1_personality); | |
| } | |
| module_init(raid_init); | |
| module_exit(raid_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("RAID1 (mirroring) personality for MD"); | |
| MODULE_ALIAS("md-personality-3"); /* RAID1 */ | |
| MODULE_ALIAS("md-raid1"); | |
| MODULE_ALIAS("md-level-1"); |