|  | /* | 
|  | * NEC NL8048HL11 Panel driver | 
|  | * | 
|  | * Copyright (C) 2010 Texas Instruments Inc. | 
|  | * Author: Erik Gilling <konkers@android.com> | 
|  | * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/of_gpio.h> | 
|  |  | 
|  | #include "../dss/omapdss.h" | 
|  |  | 
|  | struct panel_drv_data { | 
|  | struct omap_dss_device	dssdev; | 
|  | struct omap_dss_device *in; | 
|  |  | 
|  | struct videomode vm; | 
|  |  | 
|  | int res_gpio; | 
|  | int qvga_gpio; | 
|  |  | 
|  | struct spi_device *spi; | 
|  | }; | 
|  |  | 
|  | #define LCD_XRES		800 | 
|  | #define LCD_YRES		480 | 
|  | /* | 
|  | * NEC PIX Clock Ratings | 
|  | * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz | 
|  | */ | 
|  | #define LCD_PIXEL_CLOCK		23800000 | 
|  |  | 
|  | static const struct { | 
|  | unsigned char addr; | 
|  | unsigned char dat; | 
|  | } nec_8048_init_seq[] = { | 
|  | { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 }, | 
|  | { 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 }, | 
|  | { 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 },	{ 24, 0x25 }, | 
|  | { 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F }, | 
|  | { 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F },	{ 38, 0x0F }, | 
|  | { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 },	{ 43, 0x0F }, | 
|  | { 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F },	{ 48, 0x0F }, | 
|  | { 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 }, | 
|  | { 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },	{ 86, 0x14 }, | 
|  | { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 },	{ 93, 0x0C }, | 
|  | { 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, | 
|  | { 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 }, | 
|  | { 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 }, | 
|  | { 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 }, | 
|  | { 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC }, | 
|  | { 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, | 
|  | { 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 }, | 
|  | { 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 }, | 
|  | }; | 
|  |  | 
|  | static const struct videomode nec_8048_panel_vm = { | 
|  | .hactive	= LCD_XRES, | 
|  | .vactive	= LCD_YRES, | 
|  | .pixelclock	= LCD_PIXEL_CLOCK, | 
|  | .hfront_porch	= 6, | 
|  | .hsync_len	= 1, | 
|  | .hback_porch	= 4, | 
|  | .vfront_porch	= 3, | 
|  | .vsync_len	= 1, | 
|  | .vback_porch	= 4, | 
|  |  | 
|  | .flags		= DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | | 
|  | DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_POSEDGE | | 
|  | DISPLAY_FLAGS_PIXDATA_POSEDGE, | 
|  | }; | 
|  |  | 
|  | #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) | 
|  |  | 
|  | static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr, | 
|  | unsigned char reg_data) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned int cmd = 0, data = 0; | 
|  |  | 
|  | cmd = 0x0000 | reg_addr; /* register address write */ | 
|  | data = 0x0100 | reg_data; /* register data write */ | 
|  | data = (cmd << 16) | data; | 
|  |  | 
|  | ret = spi_write(spi, (unsigned char *)&data, 4); | 
|  | if (ret) | 
|  | pr_err("error in spi_write %x\n", data); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int init_nec_8048_wvga_lcd(struct spi_device *spi) | 
|  | { | 
|  | unsigned int i; | 
|  | /* Initialization Sequence */ | 
|  | /* nec_8048_spi_send(spi, REG, VAL) */ | 
|  | for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++) | 
|  | nec_8048_spi_send(spi, nec_8048_init_seq[i].addr, | 
|  | nec_8048_init_seq[i].dat); | 
|  | udelay(20); | 
|  | nec_8048_spi_send(spi, nec_8048_init_seq[i].addr, | 
|  | nec_8048_init_seq[i].dat); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int nec_8048_connect(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  | struct omap_dss_device *in = ddata->in; | 
|  | int r; | 
|  |  | 
|  | if (omapdss_device_is_connected(dssdev)) | 
|  | return 0; | 
|  |  | 
|  | r = in->ops.dpi->connect(in, dssdev); | 
|  | if (r) | 
|  | return r; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void nec_8048_disconnect(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  | struct omap_dss_device *in = ddata->in; | 
|  |  | 
|  | if (!omapdss_device_is_connected(dssdev)) | 
|  | return; | 
|  |  | 
|  | in->ops.dpi->disconnect(in, dssdev); | 
|  | } | 
|  |  | 
|  | static int nec_8048_enable(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  | struct omap_dss_device *in = ddata->in; | 
|  | int r; | 
|  |  | 
|  | if (!omapdss_device_is_connected(dssdev)) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (omapdss_device_is_enabled(dssdev)) | 
|  | return 0; | 
|  |  | 
|  | in->ops.dpi->set_timings(in, &ddata->vm); | 
|  |  | 
|  | r = in->ops.dpi->enable(in); | 
|  | if (r) | 
|  | return r; | 
|  |  | 
|  | if (gpio_is_valid(ddata->res_gpio)) | 
|  | gpio_set_value_cansleep(ddata->res_gpio, 1); | 
|  |  | 
|  | dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void nec_8048_disable(struct omap_dss_device *dssdev) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  | struct omap_dss_device *in = ddata->in; | 
|  |  | 
|  | if (!omapdss_device_is_enabled(dssdev)) | 
|  | return; | 
|  |  | 
|  | if (gpio_is_valid(ddata->res_gpio)) | 
|  | gpio_set_value_cansleep(ddata->res_gpio, 0); | 
|  |  | 
|  | in->ops.dpi->disable(in); | 
|  |  | 
|  | dssdev->state = OMAP_DSS_DISPLAY_DISABLED; | 
|  | } | 
|  |  | 
|  | static void nec_8048_set_timings(struct omap_dss_device *dssdev, | 
|  | struct videomode *vm) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  | struct omap_dss_device *in = ddata->in; | 
|  |  | 
|  | ddata->vm = *vm; | 
|  | dssdev->panel.vm = *vm; | 
|  |  | 
|  | in->ops.dpi->set_timings(in, vm); | 
|  | } | 
|  |  | 
|  | static void nec_8048_get_timings(struct omap_dss_device *dssdev, | 
|  | struct videomode *vm) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  |  | 
|  | *vm = ddata->vm; | 
|  | } | 
|  |  | 
|  | static int nec_8048_check_timings(struct omap_dss_device *dssdev, | 
|  | struct videomode *vm) | 
|  | { | 
|  | struct panel_drv_data *ddata = to_panel_data(dssdev); | 
|  | struct omap_dss_device *in = ddata->in; | 
|  |  | 
|  | return in->ops.dpi->check_timings(in, vm); | 
|  | } | 
|  |  | 
|  | static struct omap_dss_driver nec_8048_ops = { | 
|  | .connect	= nec_8048_connect, | 
|  | .disconnect	= nec_8048_disconnect, | 
|  |  | 
|  | .enable		= nec_8048_enable, | 
|  | .disable	= nec_8048_disable, | 
|  |  | 
|  | .set_timings	= nec_8048_set_timings, | 
|  | .get_timings	= nec_8048_get_timings, | 
|  | .check_timings	= nec_8048_check_timings, | 
|  | }; | 
|  |  | 
|  | static int nec_8048_probe_of(struct spi_device *spi) | 
|  | { | 
|  | struct device_node *node = spi->dev.of_node; | 
|  | struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); | 
|  | struct omap_dss_device *in; | 
|  | int gpio; | 
|  |  | 
|  | gpio = of_get_named_gpio(node, "reset-gpios", 0); | 
|  | if (!gpio_is_valid(gpio)) { | 
|  | dev_err(&spi->dev, "failed to parse enable gpio\n"); | 
|  | return gpio; | 
|  | } | 
|  | ddata->res_gpio = gpio; | 
|  |  | 
|  | /* XXX the panel spec doesn't mention any QVGA pin?? */ | 
|  | ddata->qvga_gpio = -ENOENT; | 
|  |  | 
|  | in = omapdss_of_find_source_for_first_ep(node); | 
|  | if (IS_ERR(in)) { | 
|  | dev_err(&spi->dev, "failed to find video source\n"); | 
|  | return PTR_ERR(in); | 
|  | } | 
|  |  | 
|  | ddata->in = in; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int nec_8048_probe(struct spi_device *spi) | 
|  | { | 
|  | struct panel_drv_data *ddata; | 
|  | struct omap_dss_device *dssdev; | 
|  | int r; | 
|  |  | 
|  | dev_dbg(&spi->dev, "%s\n", __func__); | 
|  |  | 
|  | spi->mode = SPI_MODE_0; | 
|  | spi->bits_per_word = 32; | 
|  |  | 
|  | r = spi_setup(spi); | 
|  | if (r < 0) { | 
|  | dev_err(&spi->dev, "spi_setup failed: %d\n", r); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | init_nec_8048_wvga_lcd(spi); | 
|  |  | 
|  | ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); | 
|  | if (ddata == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dev_set_drvdata(&spi->dev, ddata); | 
|  |  | 
|  | ddata->spi = spi; | 
|  |  | 
|  | if (!spi->dev.of_node) | 
|  | return -ENODEV; | 
|  |  | 
|  | r = nec_8048_probe_of(spi); | 
|  | if (r) | 
|  | return r; | 
|  |  | 
|  | if (gpio_is_valid(ddata->qvga_gpio)) { | 
|  | r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio, | 
|  | GPIOF_OUT_INIT_HIGH, "lcd QVGA"); | 
|  | if (r) | 
|  | goto err_gpio; | 
|  | } | 
|  |  | 
|  | if (gpio_is_valid(ddata->res_gpio)) { | 
|  | r = devm_gpio_request_one(&spi->dev, ddata->res_gpio, | 
|  | GPIOF_OUT_INIT_LOW, "lcd RES"); | 
|  | if (r) | 
|  | goto err_gpio; | 
|  | } | 
|  |  | 
|  | ddata->vm = nec_8048_panel_vm; | 
|  |  | 
|  | dssdev = &ddata->dssdev; | 
|  | dssdev->dev = &spi->dev; | 
|  | dssdev->driver = &nec_8048_ops; | 
|  | dssdev->type = OMAP_DISPLAY_TYPE_DPI; | 
|  | dssdev->owner = THIS_MODULE; | 
|  | dssdev->panel.vm = ddata->vm; | 
|  |  | 
|  | r = omapdss_register_display(dssdev); | 
|  | if (r) { | 
|  | dev_err(&spi->dev, "Failed to register panel\n"); | 
|  | goto err_reg; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_reg: | 
|  | err_gpio: | 
|  | omap_dss_put_device(ddata->in); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static int nec_8048_remove(struct spi_device *spi) | 
|  | { | 
|  | struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); | 
|  | struct omap_dss_device *dssdev = &ddata->dssdev; | 
|  | struct omap_dss_device *in = ddata->in; | 
|  |  | 
|  | dev_dbg(&ddata->spi->dev, "%s\n", __func__); | 
|  |  | 
|  | omapdss_unregister_display(dssdev); | 
|  |  | 
|  | nec_8048_disable(dssdev); | 
|  | nec_8048_disconnect(dssdev); | 
|  |  | 
|  | omap_dss_put_device(in); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int nec_8048_suspend(struct device *dev) | 
|  | { | 
|  | struct spi_device *spi = to_spi_device(dev); | 
|  |  | 
|  | nec_8048_spi_send(spi, 2, 0x01); | 
|  | mdelay(40); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int nec_8048_resume(struct device *dev) | 
|  | { | 
|  | struct spi_device *spi = to_spi_device(dev); | 
|  |  | 
|  | /* reinitialize the panel */ | 
|  | spi_setup(spi); | 
|  | nec_8048_spi_send(spi, 2, 0x00); | 
|  | init_nec_8048_wvga_lcd(spi); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend, | 
|  | nec_8048_resume); | 
|  | #define NEC_8048_PM_OPS (&nec_8048_pm_ops) | 
|  | #else | 
|  | #define NEC_8048_PM_OPS NULL | 
|  | #endif | 
|  |  | 
|  | static const struct of_device_id nec_8048_of_match[] = { | 
|  | { .compatible = "omapdss,nec,nl8048hl11", }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(of, nec_8048_of_match); | 
|  |  | 
|  | static struct spi_driver nec_8048_driver = { | 
|  | .driver = { | 
|  | .name	= "panel-nec-nl8048hl11", | 
|  | .pm	= NEC_8048_PM_OPS, | 
|  | .of_match_table = nec_8048_of_match, | 
|  | .suppress_bind_attrs = true, | 
|  | }, | 
|  | .probe	= nec_8048_probe, | 
|  | .remove	= nec_8048_remove, | 
|  | }; | 
|  |  | 
|  | module_spi_driver(nec_8048_driver); | 
|  |  | 
|  | MODULE_ALIAS("spi:nec,nl8048hl11"); | 
|  | MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); | 
|  | MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); | 
|  | MODULE_LICENSE("GPL"); |