| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Driver for USB Attached SCSI devices - Unusual Devices File |
| * |
| * (c) 2013 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Based on the same file for the usb-storage driver, which is: |
| * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) |
| * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. |
| */ |
| |
| /* |
| * IMPORTANT NOTE: This file must be included in another file which defines |
| * a UNUSUAL_DEV macro before this file is included. |
| */ |
| |
| /* |
| * If you edit this file, please try to keep it sorted first by VendorID, |
| * then by ProductID. |
| * |
| * If you want to add an entry for this file, be sure to include the |
| * following information: |
| * - a patch that adds the entry for your device, including your |
| * email address right above the entry (plus maybe a brief |
| * explanation of the reason for the entry), |
| * - lsusb -v output for the device |
| * Send your submission to Hans de Goede <hdegoede@redhat.com> |
| * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org> |
| */ |
| |
| /* |
| * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI |
| * commands in UAS mode. Observed with the 1.28 firmware; are there others? |
| */ |
| UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128, |
| "Apricorn", |
| "", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_IGNORE_UAS), |
| |
| /* Reported-by: David Webb <djw@noc.ac.uk> */ |
| UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, |
| "Seagate", |
| "Expansion Desk", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_NO_REPORT_LUNS), |
| |
| /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */ |
| UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, |
| "Initio Corporation", |
| "INIC-3069", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_NO_ATA_1X | US_FL_IGNORE_RESIDUE), |
| |
| /* Reported-by: Tom Arild Naess <tanaess@gmail.com> */ |
| UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999, |
| "JMicron", |
| "JMS539", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_NO_REPORT_OPCODES), |
| |
| /* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */ |
| UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, |
| "JMicron", |
| "JMS567", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES), |
| |
| /* Reported-by: David Kozub <zub@linux.fjfi.cvut.cz> */ |
| UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, |
| "JMicron", |
| "JMS567", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_BROKEN_FUA), |
| |
| /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ |
| UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, |
| "VIA", |
| "VL711", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_NO_ATA_1X), |
| |
| /* Reported-by: Icenowy Zheng <icenowy@aosc.io> */ |
| UNUSUAL_DEV(0x2537, 0x1068, 0x0000, 0x9999, |
| "Norelsys", |
| "NS1068X", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_IGNORE_UAS), |
| |
| /* Reported-by: Takeo Nakayama <javhera@gmx.com> */ |
| UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999, |
| "JMicron", |
| "JMS566", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_NO_REPORT_OPCODES), |
| |
| /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ |
| UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999, |
| "Hitachi", |
| "External HDD", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_IGNORE_UAS), |
| |
| /* Reported-by: Richard Henderson <rth@redhat.com> */ |
| UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999, |
| "SimpleTech", |
| "External HDD", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_NO_REPORT_OPCODES), |
| |
| /* "G-DRIVE" external HDD hangs on write without these. |
| * Patch submitted by Alexander Kappner <agk@godking.net> |
| */ |
| UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999, |
| "SimpleTech", |
| "External HDD", |
| USB_SC_DEVICE, USB_PR_DEVICE, NULL, |
| US_FL_ALWAYS_SYNC), |
