| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Garmin GPS driver |
| * |
| * Copyright (C) 2006-2011 Hermann Kneissel herkne@gmx.de |
| * |
| * The latest version of the driver can be found at |
| * http://sourceforge.net/projects/garmin-gps/ |
| * |
| * This driver has been derived from v2.1 of the visor driver. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/timer.h> |
| #include <linux/tty.h> |
| #include <linux/tty_driver.h> |
| #include <linux/tty_flip.h> |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| #include <linux/uaccess.h> |
| #include <linux/atomic.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| |
| /* the mode to be set when the port ist opened */ |
| static int initial_mode = 1; |
| |
| #define GARMIN_VENDOR_ID 0x091E |
| |
| /* |
| * Version Information |
| */ |
| |
| #define VERSION_MAJOR 0 |
| #define VERSION_MINOR 36 |
| |
| #define _STR(s) #s |
| #define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b) |
| #define DRIVER_VERSION _DRIVER_VERSION(VERSION_MAJOR, VERSION_MINOR) |
| #define DRIVER_AUTHOR "hermann kneissel" |
| #define DRIVER_DESC "garmin gps driver" |
| |
| /* error codes returned by the driver */ |
| #define EINVPKT 1000 /* invalid packet structure */ |
| |
| |
| /* size of the header of a packet using the usb protocol */ |
| #define GARMIN_PKTHDR_LENGTH 12 |
| |
| /* max. possible size of a packet using the serial protocol */ |
| #define MAX_SERIAL_PKT_SIZ (3 + 255 + 3) |
| |
| /* max. possible size of a packet with worst case stuffing */ |
| #define MAX_SERIAL_PKT_SIZ_STUFFED (MAX_SERIAL_PKT_SIZ + 256) |
| |
| /* size of a buffer able to hold a complete (no stuffing) packet |
| * (the document protocol does not contain packets with a larger |
| * size, but in theory a packet may be 64k+12 bytes - if in |
| * later protocol versions larger packet sizes occur, this value |
| * should be increased accordingly, so the input buffer is always |
| * large enough the store a complete packet inclusive header) */ |
| #define GPS_IN_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ) |
| |
| /* size of a buffer able to hold a complete (incl. stuffing) packet */ |
| #define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED) |
| |
| /* where to place the packet id of a serial packet, so we can |
| * prepend the usb-packet header without the need to move the |
| * packets data */ |
| #define GSP_INITIAL_OFFSET (GARMIN_PKTHDR_LENGTH-2) |
| |
| /* max. size of incoming private packets (header+1 param) */ |
| #define PRIVPKTSIZ (GARMIN_PKTHDR_LENGTH+4) |
| |
| #define GARMIN_LAYERID_TRANSPORT 0 |
| #define GARMIN_LAYERID_APPL 20 |
| /* our own layer-id to use for some control mechanisms */ |
| #define GARMIN_LAYERID_PRIVATE 0x01106E4B |
| |
| #define GARMIN_PKTID_PVT_DATA 51 |
| #define GARMIN_PKTID_L001_COMMAND_DATA 10 |
| |
| #define CMND_ABORT_TRANSFER 0 |
| |
| /* packet ids used in private layer */ |
| #define PRIV_PKTID_SET_DEBUG 1 |
| #define PRIV_PKTID_SET_MODE 2 |
| #define PRIV_PKTID_INFO_REQ 3 |
| #define PRIV_PKTID_INFO_RESP 4 |
| #define PRIV_PKTID_RESET_REQ 5 |
| #define PRIV_PKTID_SET_DEF_MODE 6 |
| |
| |
| #define ETX 0x03 |
| #define DLE 0x10 |
| #define ACK 0x06 |
| #define NAK 0x15 |
| |
| /* structure used to queue incoming packets */ |
| struct garmin_packet { |
| struct list_head list; |
| int seq; |
| /* the real size of the data array, always > 0 */ |
| int size; |
| __u8 data[1]; |
| }; |
| |
| /* structure used to keep the current state of the driver */ |
| struct garmin_data { |
| __u8 state; |
| __u16 flags; |
| __u8 mode; |
| __u8 count; |
| __u8 pkt_id; |
| __u32 serial_num; |
| struct timer_list timer; |
| struct usb_serial_port *port; |
| int seq_counter; |
| int insize; |
| int outsize; |
| __u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */ |
| __u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */ |
| __u8 privpkt[4*6]; |
| spinlock_t lock; |
| struct list_head pktlist; |
| struct usb_anchor write_urbs; |
| }; |
| |
| |
| #define STATE_NEW 0 |
| #define STATE_INITIAL_DELAY 1 |
| #define STATE_TIMEOUT 2 |
| #define STATE_SESSION_REQ1 3 |
| #define STATE_SESSION_REQ2 4 |
| #define STATE_ACTIVE 5 |
| |
| #define STATE_RESET 8 |
| #define STATE_DISCONNECTED 9 |
| #define STATE_WAIT_TTY_ACK 10 |
| #define STATE_GSP_WAIT_DATA 11 |
| |
| #define MODE_NATIVE 0 |
| #define MODE_GARMIN_SERIAL 1 |
| |
| /* Flags used in garmin_data.flags: */ |
| #define FLAGS_SESSION_REPLY_MASK 0x00C0 |
| #define FLAGS_SESSION_REPLY1_SEEN 0x0080 |
| #define FLAGS_SESSION_REPLY2_SEEN 0x0040 |
| #define FLAGS_BULK_IN_ACTIVE 0x0020 |
| #define FLAGS_BULK_IN_RESTART 0x0010 |
| #define FLAGS_THROTTLED 0x0008 |
| #define APP_REQ_SEEN 0x0004 |
| #define APP_RESP_SEEN 0x0002 |
| #define CLEAR_HALT_REQUIRED 0x0001 |
| |
| #define FLAGS_QUEUING 0x0100 |
| #define FLAGS_DROP_DATA 0x0800 |
| |
| #define FLAGS_GSP_SKIP 0x1000 |
| #define FLAGS_GSP_DLESEEN 0x2000 |
| |
| |
| |
| |
| |
| |
| /* function prototypes */ |
| static int gsp_next_packet(struct garmin_data *garmin_data_p); |
| static int garmin_write_bulk(struct usb_serial_port *port, |
| const unsigned char *buf, int count, |
| int dismiss_ack); |
| |
| /* some special packets to be send or received */ |
| static unsigned char const GARMIN_START_SESSION_REQ[] |
| = { 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0 }; |
| static unsigned char const GARMIN_START_SESSION_REPLY[] |
| = { 0, 0, 0, 0, 6, 0, 0, 0, 4, 0, 0, 0 }; |
| static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[] |
| = { 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 }; |
| static unsigned char const GARMIN_APP_LAYER_REPLY[] |
| = { 0x14, 0, 0, 0 }; |
| static unsigned char const GARMIN_START_PVT_REQ[] |
| = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 49, 0 }; |
| static unsigned char const GARMIN_STOP_PVT_REQ[] |
| = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 50, 0 }; |
| static unsigned char const GARMIN_STOP_TRANSFER_REQ[] |
| = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 0, 0 }; |
| static unsigned char const GARMIN_STOP_TRANSFER_REQ_V2[] |
| = { 20, 0, 0, 0, 10, 0, 0, 0, 1, 0, 0, 0, 0 }; |
| static unsigned char const PRIVATE_REQ[] |
| = { 0x4B, 0x6E, 0x10, 0x01, 0xFF, 0, 0, 0, 0xFF, 0, 0, 0 }; |
| |
| |
| |
| static const struct usb_device_id id_table[] = { |
| /* the same device id seems to be used by all |
| usb enabled GPS devices */ |
| { USB_DEVICE(GARMIN_VENDOR_ID, 3) }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| |
| static inline int getLayerId(const __u8 *usbPacket) |
| { |
| return __le32_to_cpup((__le32 *)(usbPacket)); |
| } |
| |
| static inline int getPacketId(const __u8 *usbPacket) |
| { |
| return __le32_to_cpup((__le32 *)(usbPacket+4)); |
| } |
| |
| static inline int getDataLength(const __u8 *usbPacket) |
| { |
| return __le32_to_cpup((__le32 *)(usbPacket+8)); |
| } |
| |
| |
| /* |
| * check if the usb-packet in buf contains an abort-transfer command. |
| * (if yes, all queued data will be dropped) |
| */ |
| static inline int isAbortTrfCmnd(const unsigned char *buf) |
| { |
| if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ, |
| sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 || |
| memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, |
| sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0) |
| return 1; |
| else |
| return 0; |
| } |
| |
| |
| |
| static void send_to_tty(struct usb_serial_port *port, |
| char *data, unsigned int actual_length) |
| { |
| if (actual_length) { |
| usb_serial_debug_data(&port->dev, __func__, actual_length, data); |
| tty_insert_flip_string(&port->port, data, actual_length); |
| tty_flip_buffer_push(&port->port); |
| } |
| } |
| |
| |
| /****************************************************************************** |
| * packet queue handling |
| ******************************************************************************/ |
| |
| /* |
| * queue a received (usb-)packet for later processing |
| */ |
| static int pkt_add(struct garmin_data *garmin_data_p, |
| unsigned char *data, unsigned int data_length) |
| { |
| int state = 0; |
| int result = 0; |
| unsigned long flags; |
| struct garmin_packet *pkt; |
| |
| /* process only packets containing data ... */ |
| if (data_length) { |
| pkt = kmalloc(sizeof(struct garmin_packet)+data_length, |
| GFP_ATOMIC); |
| if (!pkt) |
| return 0; |
| |
| pkt->size = data_length; |
| memcpy(pkt->data, data, data_length); |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= FLAGS_QUEUING; |
| result = list_empty(&garmin_data_p->pktlist); |
| pkt->seq = garmin_data_p->seq_counter++; |
| list_add_tail(&pkt->list, &garmin_data_p->pktlist); |
| state = garmin_data_p->state; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| dev_dbg(&garmin_data_p->port->dev, |
| "%s - added: pkt: %d - %d bytes\n", __func__, |
| pkt->seq, data_length); |
| |
| /* in serial mode, if someone is waiting for data from |
| the device, convert and send the next packet to tty. */ |
| if (result && (state == STATE_GSP_WAIT_DATA)) |
| gsp_next_packet(garmin_data_p); |
| } |
| return result; |
| } |
| |
| |
| /* get the next pending packet */ |
| static struct garmin_packet *pkt_pop(struct garmin_data *garmin_data_p) |
| { |
| unsigned long flags; |
| struct garmin_packet *result = NULL; |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| if (!list_empty(&garmin_data_p->pktlist)) { |
| result = (struct garmin_packet *)garmin_data_p->pktlist.next; |
| list_del(&result->list); |
| } |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| return result; |
| } |
| |
| |
| /* free up all queued data */ |
| static void pkt_clear(struct garmin_data *garmin_data_p) |
| { |
| unsigned long flags; |
| struct garmin_packet *result = NULL; |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| while (!list_empty(&garmin_data_p->pktlist)) { |
| result = (struct garmin_packet *)garmin_data_p->pktlist.next; |
| list_del(&result->list); |
| kfree(result); |
| } |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| } |
| |
| |
| /****************************************************************************** |
| * garmin serial protocol handling handling |
| ******************************************************************************/ |
| |
| /* send an ack packet back to the tty */ |
| static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) |
| { |
| __u8 pkt[10]; |
| __u8 cksum = 0; |
| __u8 *ptr = pkt; |
| unsigned l = 0; |
| |
| dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__, |
| pkt_id); |
| |
| *ptr++ = DLE; |
| *ptr++ = ACK; |
| cksum += ACK; |
| |
| *ptr++ = 2; |
| cksum += 2; |
| |
| *ptr++ = pkt_id; |
| cksum += pkt_id; |
| |
| if (pkt_id == DLE) |
| *ptr++ = DLE; |
| |
| *ptr++ = 0; |
| *ptr++ = (-cksum) & 0xFF; |
| *ptr++ = DLE; |
| *ptr++ = ETX; |
| |
| l = ptr-pkt; |
| |
| send_to_tty(garmin_data_p->port, pkt, l); |
| return 0; |
| } |
| |
| |
| |
| /* |
| * called for a complete packet received from tty layer |
| * |
| * the complete packet (pktid ... cksum) is in garmin_data_p->inbuf starting |
| * at GSP_INITIAL_OFFSET. |
| * |
| * count - number of bytes in the input buffer including space reserved for |
| * the usb header: GSP_INITIAL_OFFSET + number of bytes in packet |
| * (including pkt-id, data-length a. cksum) |
| */ |
| static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) |
| { |
| struct device *dev = &garmin_data_p->port->dev; |
| unsigned long flags; |
| const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; |
| __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; |
| int cksum = 0; |
| int n = 0; |
| int pktid = recpkt[0]; |
| int size = recpkt[1]; |
| |
| usb_serial_debug_data(&garmin_data_p->port->dev, __func__, |
| count-GSP_INITIAL_OFFSET, recpkt); |
| |
| if (size != (count-GSP_INITIAL_OFFSET-3)) { |
| dev_dbg(dev, "%s - invalid size, expected %d bytes, got %d\n", |
| __func__, size, (count-GSP_INITIAL_OFFSET-3)); |
| return -EINVPKT; |
| } |
| |
| cksum += *recpkt++; |
| cksum += *recpkt++; |
| |
| /* sanity check, remove after test ... */ |
| if ((__u8 *)&(usbdata[3]) != recpkt) { |
| dev_dbg(dev, "%s - ptr mismatch %p - %p\n", __func__, |
| &(usbdata[4]), recpkt); |
| return -EINVPKT; |
| } |
| |
| while (n < size) { |
| cksum += *recpkt++; |
| n++; |
| } |
| |
| if (((cksum + *recpkt) & 0xff) != 0) { |
| dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n", |
| __func__, -cksum & 0xff, *recpkt); |
| return -EINVPKT; |
| } |
| |
| usbdata[0] = __cpu_to_le32(GARMIN_LAYERID_APPL); |
| usbdata[1] = __cpu_to_le32(pktid); |
| usbdata[2] = __cpu_to_le32(size); |
| |
| garmin_write_bulk(garmin_data_p->port, garmin_data_p->inbuffer, |
| GARMIN_PKTHDR_LENGTH+size, 0); |
| |
| /* if this was an abort-transfer command, flush all |
| queued data. */ |
| if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= FLAGS_DROP_DATA; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| pkt_clear(garmin_data_p); |
| } |
| |
| return count; |
| } |
| |
| |
| |
| /* |
| * Called for data received from tty |
| * |
| * buf contains the data read, it may span more than one packet or even |
| * incomplete packets |
| * |
| * input record should be a serial-record, but it may not be complete. |
| * Copy it into our local buffer, until an etx is seen (or an error |
| * occurs). |
| * Once the record is complete, convert into a usb packet and send it |
| * to the bulk pipe, send an ack back to the tty. |
| * |
| * If the input is an ack, just send the last queued packet to the |
| * tty layer. |
| * |
| * if the input is an abort command, drop all queued data. |
| */ |
| |
| static int gsp_receive(struct garmin_data *garmin_data_p, |
| const unsigned char *buf, int count) |
| { |
| struct device *dev = &garmin_data_p->port->dev; |
| unsigned long flags; |
| int offs = 0; |
| int ack_or_nak_seen = 0; |
| __u8 *dest; |
| int size; |
| /* dleSeen: set if last byte read was a DLE */ |
| int dleSeen; |
| /* skip: if set, skip incoming data until possible start of |
| * new packet |
| */ |
| int skip; |
| __u8 data; |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| dest = garmin_data_p->inbuffer; |
| size = garmin_data_p->insize; |
| dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN; |
| skip = garmin_data_p->flags & FLAGS_GSP_SKIP; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| /* dev_dbg(dev, "%s - dle=%d skip=%d size=%d count=%d\n", |
| __func__, dleSeen, skip, size, count); */ |
| |
| if (size == 0) |
| size = GSP_INITIAL_OFFSET; |
| |
| while (offs < count) { |
| |
| data = *(buf+offs); |
| offs++; |
| |
| if (data == DLE) { |
| if (skip) { /* start of a new pkt */ |
| skip = 0; |
| size = GSP_INITIAL_OFFSET; |
| dleSeen = 1; |
| } else if (dleSeen) { |
| dest[size++] = data; |
| dleSeen = 0; |
| } else { |
| dleSeen = 1; |
| } |
| } else if (data == ETX) { |
| if (dleSeen) { |
| /* packet complete */ |
| |
| data = dest[GSP_INITIAL_OFFSET]; |
| |
| if (data == ACK) { |
| ack_or_nak_seen = ACK; |
| dev_dbg(dev, "ACK packet complete.\n"); |
| } else if (data == NAK) { |
| ack_or_nak_seen = NAK; |
| dev_dbg(dev, "NAK packet complete.\n"); |
| } else { |
| dev_dbg(dev, "packet complete - id=0x%X.\n", |
| data); |
| gsp_rec_packet(garmin_data_p, size); |
| } |
| |
| skip = 1; |
| size = GSP_INITIAL_OFFSET; |
| dleSeen = 0; |
| } else { |
| dest[size++] = data; |
| } |
| } else if (!skip) { |
| |
| if (dleSeen) { |
| size = GSP_INITIAL_OFFSET; |
| dleSeen = 0; |
| } |
| |
| dest[size++] = data; |
| } |
| |
| if (size >= GPS_IN_BUFSIZ) { |
| dev_dbg(dev, "%s - packet too large.\n", __func__); |
| skip = 1; |
| size = GSP_INITIAL_OFFSET; |
| dleSeen = 0; |
| } |
| } |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| |
| garmin_data_p->insize = size; |
| |
| /* copy flags back to structure */ |
| if (skip) |
| garmin_data_p->flags |= FLAGS_GSP_SKIP; |
| else |
| garmin_data_p->flags &= ~FLAGS_GSP_SKIP; |
| |
| if (dleSeen) |
| garmin_data_p->flags |= FLAGS_GSP_DLESEEN; |
| else |
| garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN; |
| |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| if (ack_or_nak_seen) { |
| if (gsp_next_packet(garmin_data_p) > 0) |
| garmin_data_p->state = STATE_ACTIVE; |
| else |
| garmin_data_p->state = STATE_GSP_WAIT_DATA; |
| } |
| return count; |
| } |
| |
| |
| |
| /* |
| * Sends a usb packet to the tty |
| * |
| * Assumes, that all packages and at an usb-packet boundary. |
| * |
| * return <0 on error, 0 if packet is incomplete or > 0 if packet was sent |
| */ |
| static int gsp_send(struct garmin_data *garmin_data_p, |
| const unsigned char *buf, int count) |
| { |
| struct device *dev = &garmin_data_p->port->dev; |
| const unsigned char *src; |
| unsigned char *dst; |
| int pktid = 0; |
| int datalen = 0; |
| int cksum = 0; |
| int i = 0; |
| int k; |
| |
| dev_dbg(dev, "%s - state %d - %d bytes.\n", __func__, |
| garmin_data_p->state, count); |
| |
| k = garmin_data_p->outsize; |
| if ((k+count) > GPS_OUT_BUFSIZ) { |
| dev_dbg(dev, "packet too large\n"); |
| garmin_data_p->outsize = 0; |
| return -4; |
| } |
| |
| memcpy(garmin_data_p->outbuffer+k, buf, count); |
| k += count; |
| garmin_data_p->outsize = k; |
| |
| if (k >= GARMIN_PKTHDR_LENGTH) { |
| pktid = getPacketId(garmin_data_p->outbuffer); |
| datalen = getDataLength(garmin_data_p->outbuffer); |
| i = GARMIN_PKTHDR_LENGTH + datalen; |
| if (k < i) |
| return 0; |
| } else { |
| return 0; |
| } |
| |
| dev_dbg(dev, "%s - %d bytes in buffer, %d bytes in pkt.\n", __func__, k, i); |
| |
| /* garmin_data_p->outbuffer now contains a complete packet */ |
| |
| usb_serial_debug_data(&garmin_data_p->port->dev, __func__, k, |
| garmin_data_p->outbuffer); |
| |
| garmin_data_p->outsize = 0; |
| |
| if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) { |
| dev_dbg(dev, "not an application packet (%d)\n", |
| getLayerId(garmin_data_p->outbuffer)); |
| return -1; |
| } |
| |
| if (pktid > 255) { |
| dev_dbg(dev, "packet-id %d too large\n", pktid); |
| return -2; |
| } |
| |
| if (datalen > 255) { |
| dev_dbg(dev, "packet-size %d too large\n", datalen); |
| return -3; |
| } |
| |
| /* the serial protocol should be able to handle this packet */ |
| |
| k = 0; |
| src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; |
| for (i = 0; i < datalen; i++) { |
| if (*src++ == DLE) |
| k++; |
| } |
| |
| src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; |
| if (k > (GARMIN_PKTHDR_LENGTH-2)) { |
| /* can't add stuffing DLEs in place, move data to end |
| of buffer ... */ |
| dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen; |
| memcpy(dst, src, datalen); |
| src = dst; |
| } |
| |
| dst = garmin_data_p->outbuffer; |
| |
| *dst++ = DLE; |
| *dst++ = pktid; |
| cksum += pktid; |
| *dst++ = datalen; |
| cksum += datalen; |
| if (datalen == DLE) |
| *dst++ = DLE; |
| |
| for (i = 0; i < datalen; i++) { |
| __u8 c = *src++; |
| *dst++ = c; |
| cksum += c; |
| if (c == DLE) |
| *dst++ = DLE; |
| } |
| |
| cksum = -cksum & 0xFF; |
| *dst++ = cksum; |
| if (cksum == DLE) |
| *dst++ = DLE; |
| *dst++ = DLE; |
| *dst++ = ETX; |
| |
| i = dst-garmin_data_p->outbuffer; |
| |
| send_to_tty(garmin_data_p->port, garmin_data_p->outbuffer, i); |
| |
| garmin_data_p->pkt_id = pktid; |
| garmin_data_p->state = STATE_WAIT_TTY_ACK; |
| |
| return i; |
| } |
| |
| |
| /* |
| * Process the next pending data packet - if there is one |
| */ |
| static int gsp_next_packet(struct garmin_data *garmin_data_p) |
| { |
| int result = 0; |
| struct garmin_packet *pkt = NULL; |
| |
| while ((pkt = pkt_pop(garmin_data_p)) != NULL) { |
| dev_dbg(&garmin_data_p->port->dev, "%s - next pkt: %d\n", __func__, pkt->seq); |
| result = gsp_send(garmin_data_p, pkt->data, pkt->size); |
| if (result > 0) { |
| kfree(pkt); |
| return result; |
| } |
| kfree(pkt); |
| } |
| return result; |
| } |
| |
| |
| |
| /****************************************************************************** |
| * garmin native mode |
| ******************************************************************************/ |
| |
| |
| /* |
| * Called for data received from tty |
| * |
| * The input data is expected to be in garmin usb-packet format. |
| * |
| * buf contains the data read, it may span more than one packet |
| * or even incomplete packets |
| */ |
| static int nat_receive(struct garmin_data *garmin_data_p, |
| const unsigned char *buf, int count) |
| { |
| unsigned long flags; |
| __u8 *dest; |
| int offs = 0; |
| int result = count; |
| int len; |
| |
| while (offs < count) { |
| /* if buffer contains header, copy rest of data */ |
| if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) |
| len = GARMIN_PKTHDR_LENGTH |
| +getDataLength(garmin_data_p->inbuffer); |
| else |
| len = GARMIN_PKTHDR_LENGTH; |
| |
| if (len >= GPS_IN_BUFSIZ) { |
| /* seems to be an invalid packet, ignore rest |
| of input */ |
| dev_dbg(&garmin_data_p->port->dev, |
| "%s - packet size too large: %d\n", |
| __func__, len); |
| garmin_data_p->insize = 0; |
| count = 0; |
| result = -EINVPKT; |
| } else { |
| len -= garmin_data_p->insize; |
| if (len > (count-offs)) |
| len = (count-offs); |
| if (len > 0) { |
| dest = garmin_data_p->inbuffer |
| + garmin_data_p->insize; |
| memcpy(dest, buf+offs, len); |
| garmin_data_p->insize += len; |
| offs += len; |
| } |
| } |
| |
| /* do we have a complete packet ? */ |
| if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) { |
| len = GARMIN_PKTHDR_LENGTH+ |
| getDataLength(garmin_data_p->inbuffer); |
| if (garmin_data_p->insize >= len) { |
| garmin_write_bulk(garmin_data_p->port, |
| garmin_data_p->inbuffer, |
| len, 0); |
| garmin_data_p->insize = 0; |
| |
| /* if this was an abort-transfer command, |
| flush all queued data. */ |
| if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { |
| spin_lock_irqsave(&garmin_data_p->lock, |
| flags); |
| garmin_data_p->flags |= FLAGS_DROP_DATA; |
| spin_unlock_irqrestore( |
| &garmin_data_p->lock, flags); |
| pkt_clear(garmin_data_p); |
| } |
| } |
| } |
| } |
| return result; |
| } |
| |
| |
| /****************************************************************************** |
| * private packets |
| ******************************************************************************/ |
| |
| static void priv_status_resp(struct usb_serial_port *port) |
| { |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| __le32 *pkt = (__le32 *)garmin_data_p->privpkt; |
| |
| pkt[0] = __cpu_to_le32(GARMIN_LAYERID_PRIVATE); |
| pkt[1] = __cpu_to_le32(PRIV_PKTID_INFO_RESP); |
| pkt[2] = __cpu_to_le32(12); |
| pkt[3] = __cpu_to_le32(VERSION_MAJOR << 16 | VERSION_MINOR); |
| pkt[4] = __cpu_to_le32(garmin_data_p->mode); |
| pkt[5] = __cpu_to_le32(garmin_data_p->serial_num); |
| |
| send_to_tty(port, (__u8 *)pkt, 6 * 4); |
| } |
| |
| |
| /****************************************************************************** |
| * Garmin specific driver functions |
| ******************************************************************************/ |
| |
| static int process_resetdev_request(struct usb_serial_port *port) |
| { |
| unsigned long flags; |
| int status; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED); |
| garmin_data_p->state = STATE_RESET; |
| garmin_data_p->serial_num = 0; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| usb_kill_urb(port->interrupt_in_urb); |
| dev_dbg(&port->dev, "%s - usb_reset_device\n", __func__); |
| status = usb_reset_device(port->serial->dev); |
| if (status) |
| dev_dbg(&port->dev, "%s - usb_reset_device failed: %d\n", |
| __func__, status); |
| return status; |
| } |
| |
| |
| |
| /* |
| * clear all cached data |
| */ |
| static int garmin_clear(struct garmin_data *garmin_data_p) |
| { |
| unsigned long flags; |
| |
| /* flush all queued data */ |
| pkt_clear(garmin_data_p); |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->insize = 0; |
| garmin_data_p->outsize = 0; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| return 0; |
| } |
| |
| |
| static int garmin_init_session(struct usb_serial_port *port) |
| { |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| int status; |
| int i; |
| |
| usb_kill_urb(port->interrupt_in_urb); |
| |
| status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); |
| if (status) { |
| dev_err(&port->dev, "failed to submit interrupt urb: %d\n", |
| status); |
| return status; |
| } |
| |
| /* |
| * using the initialization method from gpsbabel. See comments in |
| * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles() |
| */ |
| dev_dbg(&port->dev, "%s - starting session ...\n", __func__); |
| garmin_data_p->state = STATE_ACTIVE; |
| |
| for (i = 0; i < 3; i++) { |
| status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ, |
| sizeof(GARMIN_START_SESSION_REQ), 0); |
| if (status < 0) |
| goto err_kill_urbs; |
| } |
| |
| return 0; |
| |
| err_kill_urbs: |
| usb_kill_anchored_urbs(&garmin_data_p->write_urbs); |
| usb_kill_urb(port->interrupt_in_urb); |
| |
| return status; |
| } |
| |
| |
| |
| static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port) |
| { |
| unsigned long flags; |
| int status = 0; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->mode = initial_mode; |
| garmin_data_p->count = 0; |
| garmin_data_p->flags &= FLAGS_SESSION_REPLY1_SEEN; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| /* shutdown any bulk reads that might be going on */ |
| usb_kill_urb(port->read_urb); |
| |
| if (garmin_data_p->state == STATE_RESET) |
| status = garmin_init_session(port); |
| |
| garmin_data_p->state = STATE_ACTIVE; |
| return status; |
| } |
| |
| |
| static void garmin_close(struct usb_serial_port *port) |
| { |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| |
| dev_dbg(&port->dev, "%s - mode=%d state=%d flags=0x%X\n", |
| __func__, garmin_data_p->mode, garmin_data_p->state, |
| garmin_data_p->flags); |
| |
| garmin_clear(garmin_data_p); |
| |
| /* shutdown our urbs */ |
| usb_kill_urb(port->read_urb); |
| usb_kill_anchored_urbs(&garmin_data_p->write_urbs); |
| |
| /* keep reset state so we know that we must start a new session */ |
| if (garmin_data_p->state != STATE_RESET) |
| garmin_data_p->state = STATE_DISCONNECTED; |
| } |
| |
| |
| static void garmin_write_bulk_callback(struct urb *urb) |
| { |
| struct usb_serial_port *port = urb->context; |
| |
| if (port) { |
| struct garmin_data *garmin_data_p = |
| usb_get_serial_port_data(port); |
| |
| if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) { |
| |
| if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { |
| gsp_send_ack(garmin_data_p, |
| ((__u8 *)urb->transfer_buffer)[4]); |
| } |
| } |
| usb_serial_port_softint(port); |
| } |
| |
| /* Ignore errors that resulted from garmin_write_bulk with |
| dismiss_ack = 1 */ |
| |
| /* free up the transfer buffer, as usb_free_urb() does not do this */ |
| kfree(urb->transfer_buffer); |
| } |
| |
| |
| static int garmin_write_bulk(struct usb_serial_port *port, |
| const unsigned char *buf, int count, |
| int dismiss_ack) |
| { |
| unsigned long flags; |
| struct usb_serial *serial = port->serial; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| struct urb *urb; |
| unsigned char *buffer; |
| int status; |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags &= ~FLAGS_DROP_DATA; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| buffer = kmalloc(count, GFP_ATOMIC); |
| if (!buffer) |
| return -ENOMEM; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) { |
| kfree(buffer); |
| return -ENOMEM; |
| } |
| |
| memcpy(buffer, buf, count); |
| |
| usb_serial_debug_data(&port->dev, __func__, count, buffer); |
| |
| usb_fill_bulk_urb(urb, serial->dev, |
| usb_sndbulkpipe(serial->dev, |
| port->bulk_out_endpointAddress), |
| buffer, count, |
| garmin_write_bulk_callback, |
| dismiss_ack ? NULL : port); |
| urb->transfer_flags |= URB_ZERO_PACKET; |
| |
| if (getLayerId(buffer) == GARMIN_LAYERID_APPL) { |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= APP_REQ_SEEN; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { |
| pkt_clear(garmin_data_p); |
| garmin_data_p->state = STATE_GSP_WAIT_DATA; |
| } |
| } |
| |
| /* send it down the pipe */ |
| usb_anchor_urb(urb, &garmin_data_p->write_urbs); |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status) { |
| dev_err(&port->dev, |
| "%s - usb_submit_urb(write bulk) failed with status = %d\n", |
| __func__, status); |
| count = status; |
| usb_unanchor_urb(urb); |
| kfree(buffer); |
| } |
| |
| /* we are done with this urb, so let the host driver |
| * really free it when it is finished with it */ |
| usb_free_urb(urb); |
| |
| return count; |
| } |
| |
| static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, |
| const unsigned char *buf, int count) |
| { |
| struct device *dev = &port->dev; |
| int pktid, pktsiz, len; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; |
| |
| usb_serial_debug_data(dev, __func__, count, buf); |
| |
| if (garmin_data_p->state == STATE_RESET) |
| return -EIO; |
| |
| /* check for our private packets */ |
| if (count >= GARMIN_PKTHDR_LENGTH) { |
| len = PRIVPKTSIZ; |
| if (count < len) |
| len = count; |
| |
| memcpy(garmin_data_p->privpkt, buf, len); |
| |
| pktsiz = getDataLength(garmin_data_p->privpkt); |
| pktid = getPacketId(garmin_data_p->privpkt); |
| |
| if (count == (GARMIN_PKTHDR_LENGTH + pktsiz) && |
| getLayerId(garmin_data_p->privpkt) == |
| GARMIN_LAYERID_PRIVATE) { |
| |
| dev_dbg(dev, "%s - processing private request %d\n", |
| __func__, pktid); |
| |
| /* drop all unfinished transfers */ |
| garmin_clear(garmin_data_p); |
| |
| switch (pktid) { |
| case PRIV_PKTID_SET_MODE: |
| if (pktsiz != 4) |
| return -EINVPKT; |
| garmin_data_p->mode = __le32_to_cpu(privpkt[3]); |
| dev_dbg(dev, "%s - mode set to %d\n", |
| __func__, garmin_data_p->mode); |
| break; |
| |
| case PRIV_PKTID_INFO_REQ: |
| priv_status_resp(port); |
| break; |
| |
| case PRIV_PKTID_RESET_REQ: |
| process_resetdev_request(port); |
| break; |
| |
| case PRIV_PKTID_SET_DEF_MODE: |
| if (pktsiz != 4) |
| return -EINVPKT; |
| initial_mode = __le32_to_cpu(privpkt[3]); |
| dev_dbg(dev, "%s - initial_mode set to %d\n", |
| __func__, |
| garmin_data_p->mode); |
| break; |
| } |
| return count; |
| } |
| } |
| |
| if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { |
| return gsp_receive(garmin_data_p, buf, count); |
| } else { /* MODE_NATIVE */ |
| return nat_receive(garmin_data_p, buf, count); |
| } |
| } |
| |
| |
| static int garmin_write_room(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| /* |
| * Report back the bytes currently available in the output buffer. |
| */ |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| return GPS_OUT_BUFSIZ-garmin_data_p->outsize; |
| } |
| |
| |
| static void garmin_read_process(struct garmin_data *garmin_data_p, |
| unsigned char *data, unsigned data_length, |
| int bulk_data) |
| { |
| unsigned long flags; |
| |
| if (garmin_data_p->flags & FLAGS_DROP_DATA) { |
| /* abort-transfer cmd is active */ |
| dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__); |
| } else if (garmin_data_p->state != STATE_DISCONNECTED && |
| garmin_data_p->state != STATE_RESET) { |
| |
| /* if throttling is active or postprecessing is required |
| put the received data in the input queue, otherwise |
| send it directly to the tty port */ |
| if (garmin_data_p->flags & FLAGS_QUEUING) { |
| pkt_add(garmin_data_p, data, data_length); |
| } else if (bulk_data || |
| getLayerId(data) == GARMIN_LAYERID_APPL) { |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= APP_RESP_SEEN; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { |
| pkt_add(garmin_data_p, data, data_length); |
| } else { |
| send_to_tty(garmin_data_p->port, data, |
| data_length); |
| } |
| } |
| /* ignore system layer packets ... */ |
| } |
| } |
| |
| |
| static void garmin_read_bulk_callback(struct urb *urb) |
| { |
| unsigned long flags; |
| struct usb_serial_port *port = urb->context; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| unsigned char *data = urb->transfer_buffer; |
| int status = urb->status; |
| int retval; |
| |
| if (status) { |
| dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", |
| __func__, status); |
| return; |
| } |
| |
| usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); |
| |
| garmin_read_process(garmin_data_p, data, urb->actual_length, 1); |
| |
| if (urb->actual_length == 0 && |
| (garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) { |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| if (retval) |
| dev_err(&port->dev, |
| "%s - failed resubmitting read urb, error %d\n", |
| __func__, retval); |
| } else if (urb->actual_length > 0) { |
| /* Continue trying to read until nothing more is received */ |
| if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) { |
| retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| if (retval) |
| dev_err(&port->dev, |
| "%s - failed resubmitting read urb, error %d\n", |
| __func__, retval); |
| } |
| } else { |
| dev_dbg(&port->dev, "%s - end of bulk data\n", __func__); |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| } |
| } |
| |
| |
| static void garmin_read_int_callback(struct urb *urb) |
| { |
| unsigned long flags; |
| int retval; |
| struct usb_serial_port *port = urb->context; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| unsigned char *data = urb->transfer_buffer; |
| int status = urb->status; |
| |
| switch (status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", |
| __func__, status); |
| return; |
| default: |
| dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", |
| __func__, status); |
| return; |
| } |
| |
| usb_serial_debug_data(&port->dev, __func__, urb->actual_length, |
| urb->transfer_buffer); |
| |
| if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && |
| memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, |
| sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) { |
| |
| dev_dbg(&port->dev, "%s - bulk data available.\n", __func__); |
| |
| if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) { |
| |
| /* bulk data available */ |
| retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
| if (retval) { |
| dev_err(&port->dev, |
| "%s - failed submitting read urb, error %d\n", |
| __func__, retval); |
| } else { |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE; |
| spin_unlock_irqrestore(&garmin_data_p->lock, |
| flags); |
| } |
| } else { |
| /* bulk-in transfer still active */ |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= FLAGS_BULK_IN_RESTART; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| } |
| |
| } else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY)) |
| && memcmp(data, GARMIN_START_SESSION_REPLY, |
| sizeof(GARMIN_START_SESSION_REPLY)) == 0) { |
| |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| |
| /* save the serial number */ |
| garmin_data_p->serial_num = __le32_to_cpup( |
| (__le32 *)(data+GARMIN_PKTHDR_LENGTH)); |
| |
| dev_dbg(&port->dev, "%s - start-of-session reply seen - serial %u.\n", |
| __func__, garmin_data_p->serial_num); |
| } |
| |
| garmin_read_process(garmin_data_p, data, urb->actual_length, 0); |
| |
| retval = usb_submit_urb(urb, GFP_ATOMIC); |
| if (retval) |
| dev_err(&urb->dev->dev, |
| "%s - Error %d submitting interrupt urb\n", |
| __func__, retval); |
| } |
| |
| |
| /* |
| * Sends the next queued packt to the tty port (garmin native mode only) |
| * and then sets a timer to call itself again until all queued data |
| * is sent. |
| */ |
| static int garmin_flush_queue(struct garmin_data *garmin_data_p) |
| { |
| unsigned long flags; |
| struct garmin_packet *pkt; |
| |
| if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) { |
| pkt = pkt_pop(garmin_data_p); |
| if (pkt != NULL) { |
| send_to_tty(garmin_data_p->port, pkt->data, pkt->size); |
| kfree(pkt); |
| mod_timer(&garmin_data_p->timer, (1)+jiffies); |
| |
| } else { |
| spin_lock_irqsave(&garmin_data_p->lock, flags); |
| garmin_data_p->flags &= ~FLAGS_QUEUING; |
| spin_unlock_irqrestore(&garmin_data_p->lock, flags); |
| } |
| } |
| return 0; |
| } |
| |
| |
| static void garmin_throttle(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| |
| /* set flag, data received will be put into a queue |
| for later processing */ |
| spin_lock_irq(&garmin_data_p->lock); |
| garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED; |
| spin_unlock_irq(&garmin_data_p->lock); |
| } |
| |
| |
| static void garmin_unthrottle(struct tty_struct *tty) |
| { |
| struct usb_serial_port *port = tty->driver_data; |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| int status; |
| |
| spin_lock_irq(&garmin_data_p->lock); |
| garmin_data_p->flags &= ~FLAGS_THROTTLED; |
| spin_unlock_irq(&garmin_data_p->lock); |
| |
| /* in native mode send queued data to tty, in |
| serial mode nothing needs to be done here */ |
| if (garmin_data_p->mode == MODE_NATIVE) |
| garmin_flush_queue(garmin_data_p); |
| |
| if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) { |
| status = usb_submit_urb(port->read_urb, GFP_KERNEL); |
| if (status) |
| dev_err(&port->dev, |
| "%s - failed resubmitting read urb, error %d\n", |
| __func__, status); |
| } |
| } |
| |
| /* |
| * The timer is currently only used to send queued packets to |
| * the tty in cases where the protocol provides no own handshaking |
| * to initiate the transfer. |
| */ |
| static void timeout_handler(struct timer_list *t) |
| { |
| struct garmin_data *garmin_data_p = from_timer(garmin_data_p, t, timer); |
| |
| /* send the next queued packet to the tty port */ |
| if (garmin_data_p->mode == MODE_NATIVE) |
| if (garmin_data_p->flags & FLAGS_QUEUING) |
| garmin_flush_queue(garmin_data_p); |
| } |
| |
| |
| |
| static int garmin_port_probe(struct usb_serial_port *port) |
| { |
| int status; |
| struct garmin_data *garmin_data_p; |
| |
| garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); |
| if (!garmin_data_p) |
| return -ENOMEM; |
| |
| timer_setup(&garmin_data_p->timer, timeout_handler, 0); |
| spin_lock_init(&garmin_data_p->lock); |
| INIT_LIST_HEAD(&garmin_data_p->pktlist); |
| garmin_data_p->port = port; |
| garmin_data_p->state = 0; |
| garmin_data_p->flags = 0; |
| garmin_data_p->count = 0; |
| init_usb_anchor(&garmin_data_p->write_urbs); |
| usb_set_serial_port_data(port, garmin_data_p); |
| |
| status = garmin_init_session(port); |
| if (status) |
| goto err_free; |
| |
| return 0; |
| err_free: |
| kfree(garmin_data_p); |
| |
| return status; |
| } |
| |
| |
| static int garmin_port_remove(struct usb_serial_port *port) |
| { |
| struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); |
| |
| usb_kill_anchored_urbs(&garmin_data_p->write_urbs); |
| usb_kill_urb(port->interrupt_in_urb); |
| del_timer_sync(&garmin_data_p->timer); |
| kfree(garmin_data_p); |
| return 0; |
| } |
| |
| |
| /* All of the device info needed */ |
| static struct usb_serial_driver garmin_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "garmin_gps", |
| }, |
| .description = "Garmin GPS usb/tty", |
| .id_table = id_table, |
| .num_ports = 1, |
| .open = garmin_open, |
| .close = garmin_close, |
| .throttle = garmin_throttle, |
| .unthrottle = garmin_unthrottle, |
| .port_probe = garmin_port_probe, |
| .port_remove = garmin_port_remove, |
| .write = garmin_write, |
| .write_room = garmin_write_room, |
| .write_bulk_callback = garmin_write_bulk_callback, |
| .read_bulk_callback = garmin_read_bulk_callback, |
| .read_int_callback = garmin_read_int_callback, |
| }; |
| |
| static struct usb_serial_driver * const serial_drivers[] = { |
| &garmin_device, NULL |
| }; |
| |
| module_usb_serial_driver(serial_drivers, id_table); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(initial_mode, int, S_IRUGO); |
| MODULE_PARM_DESC(initial_mode, "Initial mode"); |