| /* |
| * Rockchip IO Voltage Domain driver |
| * |
| * Copyright 2014 MundoReader S.L. |
| * Copyright 2014 Google, Inc. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define MAX_SUPPLIES 16 |
| |
| /* |
| * The max voltage for 1.8V and 3.3V come from the Rockchip datasheet under |
| * "Recommended Operating Conditions" for "Digital GPIO". When the typical |
| * is 3.3V the max is 3.6V. When the typical is 1.8V the max is 1.98V. |
| * |
| * They are used like this: |
| * - If the voltage on a rail is above the "1.8" voltage (1.98V) we'll tell the |
| * SoC we're at 3.3. |
| * - If the voltage on a rail is above the "3.3" voltage (3.6V) we'll consider |
| * that to be an error. |
| */ |
| #define MAX_VOLTAGE_1_8 1980000 |
| #define MAX_VOLTAGE_3_3 3600000 |
| |
| #define PX30_IO_VSEL 0x180 |
| #define PX30_IO_VSEL_VCCIO6_SRC BIT(0) |
| #define PX30_IO_VSEL_VCCIO6_SUPPLY_NUM 1 |
| |
| #define RK3288_SOC_CON2 0x24c |
| #define RK3288_SOC_CON2_FLASH0 BIT(7) |
| #define RK3288_SOC_FLASH_SUPPLY_NUM 2 |
| |
| #define RK3328_SOC_CON4 0x410 |
| #define RK3328_SOC_CON4_VCCIO2 BIT(7) |
| #define RK3328_SOC_VCCIO2_SUPPLY_NUM 1 |
| |
| #define RK3368_SOC_CON15 0x43c |
| #define RK3368_SOC_CON15_FLASH0 BIT(14) |
| #define RK3368_SOC_FLASH_SUPPLY_NUM 2 |
| |
| #define RK3399_PMUGRF_CON0 0x180 |
| #define RK3399_PMUGRF_CON0_VSEL BIT(8) |
| #define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9 |
| |
| struct rockchip_iodomain; |
| |
| /** |
| * @supplies: voltage settings matching the register bits. |
| */ |
| struct rockchip_iodomain_soc_data { |
| int grf_offset; |
| const char *supply_names[MAX_SUPPLIES]; |
| void (*init)(struct rockchip_iodomain *iod); |
| }; |
| |
| struct rockchip_iodomain_supply { |
| struct rockchip_iodomain *iod; |
| struct regulator *reg; |
| struct notifier_block nb; |
| int idx; |
| }; |
| |
| struct rockchip_iodomain { |
| struct device *dev; |
| struct regmap *grf; |
| const struct rockchip_iodomain_soc_data *soc_data; |
| struct rockchip_iodomain_supply supplies[MAX_SUPPLIES]; |
| }; |
| |
| static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply, |
| int uV) |
| { |
| struct rockchip_iodomain *iod = supply->iod; |
| u32 val; |
| int ret; |
| |
| /* set value bit */ |
| val = (uV > MAX_VOLTAGE_1_8) ? 0 : 1; |
| val <<= supply->idx; |
| |
| /* apply hiword-mask */ |
| val |= (BIT(supply->idx) << 16); |
| |
| ret = regmap_write(iod->grf, iod->soc_data->grf_offset, val); |
| if (ret) |
| dev_err(iod->dev, "Couldn't write to GRF\n"); |
| |
| return ret; |
| } |
| |
| static int rockchip_iodomain_notify(struct notifier_block *nb, |
| unsigned long event, |
| void *data) |
| { |
| struct rockchip_iodomain_supply *supply = |
| container_of(nb, struct rockchip_iodomain_supply, nb); |
| int uV; |
| int ret; |
| |
| /* |
| * According to Rockchip it's important to keep the SoC IO domain |
| * higher than (or equal to) the external voltage. That means we need |
| * to change it before external voltage changes happen in the case |
| * of an increase. |
| * |
| * Note that in the "pre" change we pick the max possible voltage that |
| * the regulator might end up at (the client requests a range and we |
| * don't know for certain the exact voltage). Right now we rely on the |
| * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients |
| * request something like a max of 3.6V when they really want 3.3V. |
| * We could attempt to come up with better rules if this fails. |
| */ |
| if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) { |
| struct pre_voltage_change_data *pvc_data = data; |
| |
| uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV); |
| } else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE | |
| REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) { |
| uV = (unsigned long)data; |
| } else { |
| return NOTIFY_OK; |
| } |
| |
| dev_dbg(supply->iod->dev, "Setting to %d\n", uV); |
| |
| if (uV > MAX_VOLTAGE_3_3) { |
| dev_err(supply->iod->dev, "Voltage too high: %d\n", uV); |
| |
| if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) |
| return NOTIFY_BAD; |
| } |
| |
| ret = rockchip_iodomain_write(supply, uV); |
| if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) |
| return NOTIFY_BAD; |
| |
| dev_dbg(supply->iod->dev, "Setting to %d done\n", uV); |
| return NOTIFY_OK; |
| } |
| |
| static void px30_iodomain_init(struct rockchip_iodomain *iod) |
| { |
| int ret; |
| u32 val; |
| |
| /* if no VCCIO0 supply we should leave things alone */ |
| if (!iod->supplies[PX30_IO_VSEL_VCCIO6_SUPPLY_NUM].reg) |
| return; |
| |
| /* |
| * set vccio0 iodomain to also use this framework |
| * instead of a special gpio. |
| */ |
| val = PX30_IO_VSEL_VCCIO6_SRC | (PX30_IO_VSEL_VCCIO6_SRC << 16); |
| ret = regmap_write(iod->grf, PX30_IO_VSEL, val); |
| if (ret < 0) |
| dev_warn(iod->dev, "couldn't update vccio0 ctrl\n"); |
| } |
| |
| static void rk3288_iodomain_init(struct rockchip_iodomain *iod) |
| { |
| int ret; |
| u32 val; |
| |
| /* if no flash supply we should leave things alone */ |
| if (!iod->supplies[RK3288_SOC_FLASH_SUPPLY_NUM].reg) |
| return; |
| |
| /* |
| * set flash0 iodomain to also use this framework |
| * instead of a special gpio. |
| */ |
| val = RK3288_SOC_CON2_FLASH0 | (RK3288_SOC_CON2_FLASH0 << 16); |
| ret = regmap_write(iod->grf, RK3288_SOC_CON2, val); |
| if (ret < 0) |
| dev_warn(iod->dev, "couldn't update flash0 ctrl\n"); |
| } |
| |
| static void rk3328_iodomain_init(struct rockchip_iodomain *iod) |
| { |
| int ret; |
| u32 val; |
| |
| /* if no vccio2 supply we should leave things alone */ |
| if (!iod->supplies[RK3328_SOC_VCCIO2_SUPPLY_NUM].reg) |
| return; |
| |
| /* |
| * set vccio2 iodomain to also use this framework |
| * instead of a special gpio. |
| */ |
| val = RK3328_SOC_CON4_VCCIO2 | (RK3328_SOC_CON4_VCCIO2 << 16); |
| ret = regmap_write(iod->grf, RK3328_SOC_CON4, val); |
| if (ret < 0) |
| dev_warn(iod->dev, "couldn't update vccio2 vsel ctrl\n"); |
| } |
| |
| static void rk3368_iodomain_init(struct rockchip_iodomain *iod) |
| { |
| int ret; |
| u32 val; |
| |
| /* if no flash supply we should leave things alone */ |
| if (!iod->supplies[RK3368_SOC_FLASH_SUPPLY_NUM].reg) |
| return; |
| |
| /* |
| * set flash0 iodomain to also use this framework |
| * instead of a special gpio. |
| */ |
| val = RK3368_SOC_CON15_FLASH0 | (RK3368_SOC_CON15_FLASH0 << 16); |
| ret = regmap_write(iod->grf, RK3368_SOC_CON15, val); |
| if (ret < 0) |
| dev_warn(iod->dev, "couldn't update flash0 ctrl\n"); |
| } |
| |
| static void rk3399_pmu_iodomain_init(struct rockchip_iodomain *iod) |
| { |
| int ret; |
| u32 val; |
| |
| /* if no pmu io supply we should leave things alone */ |
| if (!iod->supplies[RK3399_PMUGRF_VSEL_SUPPLY_NUM].reg) |
| return; |
| |
| /* |
| * set pmu io iodomain to also use this framework |
| * instead of a special gpio. |
| */ |
| val = RK3399_PMUGRF_CON0_VSEL | (RK3399_PMUGRF_CON0_VSEL << 16); |
| ret = regmap_write(iod->grf, RK3399_PMUGRF_CON0, val); |
| if (ret < 0) |
| dev_warn(iod->dev, "couldn't update pmu io iodomain ctrl\n"); |
| } |
| |
| static const struct rockchip_iodomain_soc_data soc_data_px30 = { |
| .grf_offset = 0x180, |
| .supply_names = { |
| NULL, |
| "vccio6", |
| "vccio1", |
| "vccio2", |
| "vccio3", |
| "vccio4", |
| "vccio5", |
| "vccio-oscgpi", |
| }, |
| .init = px30_iodomain_init, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_px30_pmu = { |
| .grf_offset = 0x100, |
| .supply_names = { |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "pmuio1", |
| "pmuio2", |
| }, |
| }; |
| |
| /* |
| * On the rk3188 the io-domains are handled by a shared register with the |
| * lower 8 bits being still being continuing drive-strength settings. |
| */ |
| static const struct rockchip_iodomain_soc_data soc_data_rk3188 = { |
| .grf_offset = 0x104, |
| .supply_names = { |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "ap0", |
| "ap1", |
| "cif", |
| "flash", |
| "vccio0", |
| "vccio1", |
| "lcdc0", |
| "lcdc1", |
| }, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3228 = { |
| .grf_offset = 0x418, |
| .supply_names = { |
| "vccio1", |
| "vccio2", |
| "vccio3", |
| "vccio4", |
| }, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3288 = { |
| .grf_offset = 0x380, |
| .supply_names = { |
| "lcdc", /* LCDC_VDD */ |
| "dvp", /* DVPIO_VDD */ |
| "flash0", /* FLASH0_VDD (emmc) */ |
| "flash1", /* FLASH1_VDD (sdio1) */ |
| "wifi", /* APIO3_VDD (sdio0) */ |
| "bb", /* APIO5_VDD */ |
| "audio", /* APIO4_VDD */ |
| "sdcard", /* SDMMC0_VDD (sdmmc) */ |
| "gpio30", /* APIO1_VDD */ |
| "gpio1830", /* APIO2_VDD */ |
| }, |
| .init = rk3288_iodomain_init, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3328 = { |
| .grf_offset = 0x410, |
| .supply_names = { |
| "vccio1", |
| "vccio2", |
| "vccio3", |
| "vccio4", |
| "vccio5", |
| "vccio6", |
| "pmuio", |
| }, |
| .init = rk3328_iodomain_init, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3368 = { |
| .grf_offset = 0x900, |
| .supply_names = { |
| NULL, /* reserved */ |
| "dvp", /* DVPIO_VDD */ |
| "flash0", /* FLASH0_VDD (emmc) */ |
| "wifi", /* APIO2_VDD (sdio0) */ |
| NULL, |
| "audio", /* APIO3_VDD */ |
| "sdcard", /* SDMMC0_VDD (sdmmc) */ |
| "gpio30", /* APIO1_VDD */ |
| "gpio1830", /* APIO4_VDD (gpujtag) */ |
| }, |
| .init = rk3368_iodomain_init, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3368_pmu = { |
| .grf_offset = 0x100, |
| .supply_names = { |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "pmu", /*PMU IO domain*/ |
| "vop", /*LCDC IO domain*/ |
| }, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3399 = { |
| .grf_offset = 0xe640, |
| .supply_names = { |
| "bt656", /* APIO2_VDD */ |
| "audio", /* APIO5_VDD */ |
| "sdmmc", /* SDMMC0_VDD */ |
| "gpio1830", /* APIO4_VDD */ |
| }, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = { |
| .grf_offset = 0x180, |
| .supply_names = { |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "pmu1830", /* PMUIO2_VDD */ |
| }, |
| .init = rk3399_pmu_iodomain_init, |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rv1108 = { |
| .grf_offset = 0x404, |
| .supply_names = { |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "vccio1", |
| "vccio2", |
| "vccio3", |
| "vccio5", |
| "vccio6", |
| }, |
| |
| }; |
| |
| static const struct rockchip_iodomain_soc_data soc_data_rv1108_pmu = { |
| .grf_offset = 0x104, |
| .supply_names = { |
| "pmu", |
| }, |
| }; |
| |
| static const struct of_device_id rockchip_iodomain_match[] = { |
| { |
| .compatible = "rockchip,px30-io-voltage-domain", |
| .data = (void *)&soc_data_px30 |
| }, |
| { |
| .compatible = "rockchip,px30-pmu-io-voltage-domain", |
| .data = (void *)&soc_data_px30_pmu |
| }, |
| { |
| .compatible = "rockchip,rk3188-io-voltage-domain", |
| .data = &soc_data_rk3188 |
| }, |
| { |
| .compatible = "rockchip,rk3228-io-voltage-domain", |
| .data = &soc_data_rk3228 |
| }, |
| { |
| .compatible = "rockchip,rk3288-io-voltage-domain", |
| .data = &soc_data_rk3288 |
| }, |
| { |
| .compatible = "rockchip,rk3328-io-voltage-domain", |
| .data = &soc_data_rk3328 |
| }, |
| { |
| .compatible = "rockchip,rk3368-io-voltage-domain", |
| .data = &soc_data_rk3368 |
| }, |
| { |
| .compatible = "rockchip,rk3368-pmu-io-voltage-domain", |
| .data = &soc_data_rk3368_pmu |
| }, |
| { |
| .compatible = "rockchip,rk3399-io-voltage-domain", |
| .data = &soc_data_rk3399 |
| }, |
| { |
| .compatible = "rockchip,rk3399-pmu-io-voltage-domain", |
| .data = &soc_data_rk3399_pmu |
| }, |
| { |
| .compatible = "rockchip,rv1108-io-voltage-domain", |
| .data = &soc_data_rv1108 |
| }, |
| { |
| .compatible = "rockchip,rv1108-pmu-io-voltage-domain", |
| .data = &soc_data_rv1108_pmu |
| }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, rockchip_iodomain_match); |
| |
| static int rockchip_iodomain_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const struct of_device_id *match; |
| struct rockchip_iodomain *iod; |
| struct device *parent; |
| int i, ret = 0; |
| |
| if (!np) |
| return -ENODEV; |
| |
| iod = devm_kzalloc(&pdev->dev, sizeof(*iod), GFP_KERNEL); |
| if (!iod) |
| return -ENOMEM; |
| |
| iod->dev = &pdev->dev; |
| platform_set_drvdata(pdev, iod); |
| |
| match = of_match_node(rockchip_iodomain_match, np); |
| iod->soc_data = match->data; |
| |
| parent = pdev->dev.parent; |
| if (parent && parent->of_node) { |
| iod->grf = syscon_node_to_regmap(parent->of_node); |
| } else { |
| dev_dbg(&pdev->dev, "falling back to old binding\n"); |
| iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); |
| } |
| |
| if (IS_ERR(iod->grf)) { |
| dev_err(&pdev->dev, "couldn't find grf regmap\n"); |
| return PTR_ERR(iod->grf); |
| } |
| |
| for (i = 0; i < MAX_SUPPLIES; i++) { |
| const char *supply_name = iod->soc_data->supply_names[i]; |
| struct rockchip_iodomain_supply *supply = &iod->supplies[i]; |
| struct regulator *reg; |
| int uV; |
| |
| if (!supply_name) |
| continue; |
| |
| reg = devm_regulator_get_optional(iod->dev, supply_name); |
| if (IS_ERR(reg)) { |
| ret = PTR_ERR(reg); |
| |
| /* If a supply wasn't specified, that's OK */ |
| if (ret == -ENODEV) |
| continue; |
| else if (ret != -EPROBE_DEFER) |
| dev_err(iod->dev, "couldn't get regulator %s\n", |
| supply_name); |
| goto unreg_notify; |
| } |
| |
| /* set initial correct value */ |
| uV = regulator_get_voltage(reg); |
| |
| /* must be a regulator we can get the voltage of */ |
| if (uV < 0) { |
| dev_err(iod->dev, "Can't determine voltage: %s\n", |
| supply_name); |
| goto unreg_notify; |
| } |
| |
| if (uV > MAX_VOLTAGE_3_3) { |
| dev_crit(iod->dev, |
| "%d uV is too high. May damage SoC!\n", |
| uV); |
| ret = -EINVAL; |
| goto unreg_notify; |
| } |
| |
| /* setup our supply */ |
| supply->idx = i; |
| supply->iod = iod; |
| supply->reg = reg; |
| supply->nb.notifier_call = rockchip_iodomain_notify; |
| |
| ret = rockchip_iodomain_write(supply, uV); |
| if (ret) { |
| supply->reg = NULL; |
| goto unreg_notify; |
| } |
| |
| /* register regulator notifier */ |
| ret = regulator_register_notifier(reg, &supply->nb); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "regulator notifier request failed\n"); |
| supply->reg = NULL; |
| goto unreg_notify; |
| } |
| } |
| |
| if (iod->soc_data->init) |
| iod->soc_data->init(iod); |
| |
| return 0; |
| |
| unreg_notify: |
| for (i = MAX_SUPPLIES - 1; i >= 0; i--) { |
| struct rockchip_iodomain_supply *io_supply = &iod->supplies[i]; |
| |
| if (io_supply->reg) |
| regulator_unregister_notifier(io_supply->reg, |
| &io_supply->nb); |
| } |
| |
| return ret; |
| } |
| |
| static int rockchip_iodomain_remove(struct platform_device *pdev) |
| { |
| struct rockchip_iodomain *iod = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = MAX_SUPPLIES - 1; i >= 0; i--) { |
| struct rockchip_iodomain_supply *io_supply = &iod->supplies[i]; |
| |
| if (io_supply->reg) |
| regulator_unregister_notifier(io_supply->reg, |
| &io_supply->nb); |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver rockchip_iodomain_driver = { |
| .probe = rockchip_iodomain_probe, |
| .remove = rockchip_iodomain_remove, |
| .driver = { |
| .name = "rockchip-iodomain", |
| .of_match_table = rockchip_iodomain_match, |
| }, |
| }; |
| |
| module_platform_driver(rockchip_iodomain_driver); |
| |
| MODULE_DESCRIPTION("Rockchip IO-domain driver"); |
| MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); |
| MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>"); |
| MODULE_LICENSE("GPL v2"); |