| /* |
| * OMAP Secure API infrastructure. |
| * |
| * Copyright (C) 2011 Texas Instruments, Inc. |
| * Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> |
| * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> |
| * |
| * |
| * This program is free software,you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/memblock.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/memblock.h> |
| |
| #include "omap-secure.h" |
| |
| static phys_addr_t omap_secure_memblock_base; |
| |
| /** |
| * omap_sec_dispatcher: Routine to dispatch low power secure |
| * service routines |
| * @idx: The HAL API index |
| * @flag: The flag indicating criticality of operation |
| * @nargs: Number of valid arguments out of four. |
| * @arg1, arg2, arg3 args4: Parameters passed to secure API |
| * |
| * Return the non-zero error value on failure. |
| */ |
| u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, |
| u32 arg3, u32 arg4) |
| { |
| u32 ret; |
| u32 param[5]; |
| |
| param[0] = nargs; |
| param[1] = arg1; |
| param[2] = arg2; |
| param[3] = arg3; |
| param[4] = arg4; |
| |
| /* |
| * Secure API needs physical address |
| * pointer for the parameters |
| */ |
| flush_cache_all(); |
| outer_clean_range(__pa(param), __pa(param + 5)); |
| ret = omap_smc2(idx, flag, __pa(param)); |
| |
| return ret; |
| } |
| |
| /* Allocate the memory to save secure ram */ |
| int __init omap_secure_ram_reserve_memblock(void) |
| { |
| u32 size = OMAP_SECURE_RAM_STORAGE; |
| |
| size = ALIGN(size, SECTION_SIZE); |
| omap_secure_memblock_base = arm_memblock_steal(size, SECTION_SIZE); |
| |
| return 0; |
| } |
| |
| phys_addr_t omap_secure_ram_mempool_base(void) |
| { |
| return omap_secure_memblock_base; |
| } |
| |
| #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) |
| u32 omap3_save_secure_ram(void __iomem *addr, int size) |
| { |
| u32 ret; |
| u32 param[5]; |
| |
| if (size != OMAP3_SAVE_SECURE_RAM_SZ) |
| return OMAP3_SAVE_SECURE_RAM_SZ; |
| |
| param[0] = 4; /* Number of arguments */ |
| param[1] = __pa(addr); /* Physical address for saving */ |
| param[2] = 0; |
| param[3] = 1; |
| param[4] = 1; |
| |
| ret = save_secure_ram_context(__pa(param)); |
| |
| return ret; |
| } |
| #endif |
| |
| /** |
| * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls |
| * @idx: The PPA API index |
| * @process: Process ID |
| * @flag: The flag indicating criticality of operation |
| * @nargs: Number of valid arguments out of four. |
| * @arg1, arg2, arg3 args4: Parameters passed to secure API |
| * |
| * Return the non-zero error value on failure. |
| * |
| * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because |
| * it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1 |
| */ |
| u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs, |
| u32 arg1, u32 arg2, u32 arg3, u32 arg4) |
| { |
| u32 ret; |
| u32 param[5]; |
| |
| param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */ |
| param[1] = arg1; |
| param[2] = arg2; |
| param[3] = arg3; |
| param[4] = arg4; |
| |
| /* |
| * Secure API needs physical address |
| * pointer for the parameters |
| */ |
| local_irq_disable(); |
| local_fiq_disable(); |
| flush_cache_all(); |
| outer_clean_range(__pa(param), __pa(param + 5)); |
| ret = omap_smc3(idx, process, flag, __pa(param)); |
| flush_cache_all(); |
| local_fiq_enable(); |
| local_irq_enable(); |
| |
| return ret; |
| } |
| |
| /** |
| * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register |
| * @set_bits: bits to set in ACR |
| * @clr_bits: bits to clear in ACR |
| * |
| * Return the non-zero error value on failure. |
| */ |
| u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits) |
| { |
| u32 acr; |
| |
| /* Read ACR */ |
| asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); |
| acr &= ~clear_bits; |
| acr |= set_bits; |
| |
| return rx51_secure_dispatcher(RX51_PPA_WRITE_ACR, |
| 0, |
| FLAG_START_CRITICAL, |
| 1, acr, 0, 0, 0); |
| } |
| |
| /** |
| * rx51_secure_rng_call: Routine for HW random generator |
| */ |
| u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag) |
| { |
| return rx51_secure_dispatcher(RX51_PPA_HWRNG, |
| 0, |
| NO_FLAG, |
| 3, ptr, count, flag, 0); |
| } |