| /* | |
| * linux/kernel/printk.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * Modified to make sys_syslog() more flexible: added commands to | |
| * return the last 4k of kernel messages, regardless of whether | |
| * they've been read or not. Added option to suppress kernel printk's | |
| * to the console. Added hook for sending the console messages | |
| * elsewhere, in preparation for a serial line console (someday). | |
| * Ted Ts'o, 2/11/93. | |
| * Modified for sysctl support, 1/8/97, Chris Horn. | |
| * Fixed SMP synchronization, 08/08/99, Manfred Spraul | |
| * manfred@colorfullife.com | |
| * Rewrote bits to get rid of console_lock | |
| * 01Mar01 Andrew Morton | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/tty.h> | |
| #include <linux/tty_driver.h> | |
| #include <linux/console.h> | |
| #include <linux/init.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/nmi.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/interrupt.h> /* For in_interrupt() */ | |
| #include <linux/delay.h> | |
| #include <linux/smp.h> | |
| #include <linux/security.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/memblock.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/kexec.h> | |
| #include <linux/kdb.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/kmsg_dump.h> | |
| #include <linux/syslog.h> | |
| #include <linux/cpu.h> | |
| #include <linux/notifier.h> | |
| #include <linux/rculist.h> | |
| #include <linux/poll.h> | |
| #include <asm/uaccess.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/printk.h> | |
| /* | |
| * Architectures can override it: | |
| */ | |
| void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...) | |
| { | |
| } | |
| /* printk's without a loglevel use this.. */ | |
| #define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL | |
| /* We show everything that is MORE important than this.. */ | |
| #define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */ | |
| #define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */ | |
| DECLARE_WAIT_QUEUE_HEAD(log_wait); | |
| int console_printk[4] = { | |
| DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */ | |
| DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */ | |
| MINIMUM_CONSOLE_LOGLEVEL, /* minimum_console_loglevel */ | |
| DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */ | |
| }; | |
| /* | |
| * Low level drivers may need that to know if they can schedule in | |
| * their unblank() callback or not. So let's export it. | |
| */ | |
| int oops_in_progress; | |
| EXPORT_SYMBOL(oops_in_progress); | |
| /* | |
| * console_sem protects the console_drivers list, and also | |
| * provides serialisation for access to the entire console | |
| * driver system. | |
| */ | |
| static DEFINE_SEMAPHORE(console_sem); | |
| struct console *console_drivers; | |
| EXPORT_SYMBOL_GPL(console_drivers); | |
| /* | |
| * This is used for debugging the mess that is the VT code by | |
| * keeping track if we have the console semaphore held. It's | |
| * definitely not the perfect debug tool (we don't know if _WE_ | |
| * hold it are racing, but it helps tracking those weird code | |
| * path in the console code where we end up in places I want | |
| * locked without the console sempahore held | |
| */ | |
| static int console_locked, console_suspended; | |
| /* | |
| * If exclusive_console is non-NULL then only this console is to be printed to. | |
| */ | |
| static struct console *exclusive_console; | |
| /* | |
| * Array of consoles built from command line options (console=) | |
| */ | |
| struct console_cmdline | |
| { | |
| char name[8]; /* Name of the driver */ | |
| int index; /* Minor dev. to use */ | |
| char *options; /* Options for the driver */ | |
| #ifdef CONFIG_A11Y_BRAILLE_CONSOLE | |
| char *brl_options; /* Options for braille driver */ | |
| #endif | |
| }; | |
| #define MAX_CMDLINECONSOLES 8 | |
| static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; | |
| static int selected_console = -1; | |
| static int preferred_console = -1; | |
| int console_set_on_cmdline; | |
| EXPORT_SYMBOL(console_set_on_cmdline); | |
| /* Flag: console code may call schedule() */ | |
| static int console_may_schedule; | |
| /* | |
| * The printk log buffer consists of a chain of concatenated variable | |
| * length records. Every record starts with a record header, containing | |
| * the overall length of the record. | |
| * | |
| * The heads to the first and last entry in the buffer, as well as the | |
| * sequence numbers of these both entries are maintained when messages | |
| * are stored.. | |
| * | |
| * If the heads indicate available messages, the length in the header | |
| * tells the start next message. A length == 0 for the next message | |
| * indicates a wrap-around to the beginning of the buffer. | |
| * | |
| * Every record carries the monotonic timestamp in microseconds, as well as | |
| * the standard userspace syslog level and syslog facility. The usual | |
| * kernel messages use LOG_KERN; userspace-injected messages always carry | |
| * a matching syslog facility, by default LOG_USER. The origin of every | |
| * message can be reliably determined that way. | |
| * | |
| * The human readable log message directly follows the message header. The | |
| * length of the message text is stored in the header, the stored message | |
| * is not terminated. | |
| * | |
| * Optionally, a message can carry a dictionary of properties (key/value pairs), | |
| * to provide userspace with a machine-readable message context. | |
| * | |
| * Examples for well-defined, commonly used property names are: | |
| * DEVICE=b12:8 device identifier | |
| * b12:8 block dev_t | |
| * c127:3 char dev_t | |
| * n8 netdev ifindex | |
| * +sound:card0 subsystem:devname | |
| * SUBSYSTEM=pci driver-core subsystem name | |
| * | |
| * Valid characters in property names are [a-zA-Z0-9.-_]. The plain text value | |
| * follows directly after a '=' character. Every property is terminated by | |
| * a '\0' character. The last property is not terminated. | |
| * | |
| * Example of a message structure: | |
| * 0000 ff 8f 00 00 00 00 00 00 monotonic time in nsec | |
| * 0008 34 00 record is 52 bytes long | |
| * 000a 0b 00 text is 11 bytes long | |
| * 000c 1f 00 dictionary is 23 bytes long | |
| * 000e 03 00 LOG_KERN (facility) LOG_ERR (level) | |
| * 0010 69 74 27 73 20 61 20 6c "it's a l" | |
| * 69 6e 65 "ine" | |
| * 001b 44 45 56 49 43 "DEVIC" | |
| * 45 3d 62 38 3a 32 00 44 "E=b8:2\0D" | |
| * 52 49 56 45 52 3d 62 75 "RIVER=bu" | |
| * 67 "g" | |
| * 0032 00 00 00 padding to next message header | |
| * | |
| * The 'struct log' buffer header must never be directly exported to | |
| * userspace, it is a kernel-private implementation detail that might | |
| * need to be changed in the future, when the requirements change. | |
| * | |
| * /dev/kmsg exports the structured data in the following line format: | |
| * "level,sequnum,timestamp;<message text>\n" | |
| * | |
| * The optional key/value pairs are attached as continuation lines starting | |
| * with a space character and terminated by a newline. All possible | |
| * non-prinatable characters are escaped in the "\xff" notation. | |
| * | |
| * Users of the export format should ignore possible additional values | |
| * separated by ',', and find the message after the ';' character. | |
| */ | |
| struct log { | |
| u64 ts_nsec; /* timestamp in nanoseconds */ | |
| u16 len; /* length of entire record */ | |
| u16 text_len; /* length of text buffer */ | |
| u16 dict_len; /* length of dictionary buffer */ | |
| u16 level; /* syslog level + facility */ | |
| }; | |
| /* | |
| * The logbuf_lock protects kmsg buffer, indices, counters. It is also | |
| * used in interesting ways to provide interlocking in console_unlock(); | |
| */ | |
| static DEFINE_RAW_SPINLOCK(logbuf_lock); | |
| /* the next printk record to read by syslog(READ) or /proc/kmsg */ | |
| static u64 syslog_seq; | |
| static u32 syslog_idx; | |
| /* index and sequence number of the first record stored in the buffer */ | |
| static u64 log_first_seq; | |
| static u32 log_first_idx; | |
| /* index and sequence number of the next record to store in the buffer */ | |
| static u64 log_next_seq; | |
| #ifdef CONFIG_PRINTK | |
| static u32 log_next_idx; | |
| /* the next printk record to read after the last 'clear' command */ | |
| static u64 clear_seq; | |
| static u32 clear_idx; | |
| #define LOG_LINE_MAX 1024 | |
| /* record buffer */ | |
| #if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) | |
| #define LOG_ALIGN 4 | |
| #else | |
| #define LOG_ALIGN 8 | |
| #endif | |
| #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) | |
| static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN); | |
| static char *log_buf = __log_buf; | |
| static u32 log_buf_len = __LOG_BUF_LEN; | |
| /* cpu currently holding logbuf_lock */ | |
| static volatile unsigned int logbuf_cpu = UINT_MAX; | |
| /* human readable text of the record */ | |
| static char *log_text(const struct log *msg) | |
| { | |
| return (char *)msg + sizeof(struct log); | |
| } | |
| /* optional key/value pair dictionary attached to the record */ | |
| static char *log_dict(const struct log *msg) | |
| { | |
| return (char *)msg + sizeof(struct log) + msg->text_len; | |
| } | |
| /* get record by index; idx must point to valid msg */ | |
| static struct log *log_from_idx(u32 idx) | |
| { | |
| struct log *msg = (struct log *)(log_buf + idx); | |
| /* | |
| * A length == 0 record is the end of buffer marker. Wrap around and | |
| * read the message at the start of the buffer. | |
| */ | |
| if (!msg->len) | |
| return (struct log *)log_buf; | |
| return msg; | |
| } | |
| /* get next record; idx must point to valid msg */ | |
| static u32 log_next(u32 idx) | |
| { | |
| struct log *msg = (struct log *)(log_buf + idx); | |
| /* length == 0 indicates the end of the buffer; wrap */ | |
| /* | |
| * A length == 0 record is the end of buffer marker. Wrap around and | |
| * read the message at the start of the buffer as *this* one, and | |
| * return the one after that. | |
| */ | |
| if (!msg->len) { | |
| msg = (struct log *)log_buf; | |
| return msg->len; | |
| } | |
| return idx + msg->len; | |
| } | |
| /* insert record into the buffer, discard old ones, update heads */ | |
| static void log_store(int facility, int level, | |
| const char *dict, u16 dict_len, | |
| const char *text, u16 text_len) | |
| { | |
| struct log *msg; | |
| u32 size, pad_len; | |
| /* number of '\0' padding bytes to next message */ | |
| size = sizeof(struct log) + text_len + dict_len; | |
| pad_len = (-size) & (LOG_ALIGN - 1); | |
| size += pad_len; | |
| while (log_first_seq < log_next_seq) { | |
| u32 free; | |
| if (log_next_idx > log_first_idx) | |
| free = max(log_buf_len - log_next_idx, log_first_idx); | |
| else | |
| free = log_first_idx - log_next_idx; | |
| if (free > size + sizeof(struct log)) | |
| break; | |
| /* drop old messages until we have enough contiuous space */ | |
| log_first_idx = log_next(log_first_idx); | |
| log_first_seq++; | |
| } | |
| if (log_next_idx + size + sizeof(struct log) >= log_buf_len) { | |
| /* | |
| * This message + an additional empty header does not fit | |
| * at the end of the buffer. Add an empty header with len == 0 | |
| * to signify a wrap around. | |
| */ | |
| memset(log_buf + log_next_idx, 0, sizeof(struct log)); | |
| log_next_idx = 0; | |
| } | |
| /* fill message */ | |
| msg = (struct log *)(log_buf + log_next_idx); | |
| memcpy(log_text(msg), text, text_len); | |
| msg->text_len = text_len; | |
| memcpy(log_dict(msg), dict, dict_len); | |
| msg->dict_len = dict_len; | |
| msg->level = (facility << 3) | (level & 7); | |
| msg->ts_nsec = local_clock(); | |
| memset(log_dict(msg) + dict_len, 0, pad_len); | |
| msg->len = sizeof(struct log) + text_len + dict_len + pad_len; | |
| /* insert message */ | |
| log_next_idx += msg->len; | |
| log_next_seq++; | |
| } | |
| /* /dev/kmsg - userspace message inject/listen interface */ | |
| struct devkmsg_user { | |
| u64 seq; | |
| u32 idx; | |
| struct mutex lock; | |
| char buf[8192]; | |
| }; | |
| static ssize_t devkmsg_writev(struct kiocb *iocb, const struct iovec *iv, | |
| unsigned long count, loff_t pos) | |
| { | |
| char *buf, *line; | |
| int i; | |
| int level = default_message_loglevel; | |
| int facility = 1; /* LOG_USER */ | |
| size_t len = iov_length(iv, count); | |
| ssize_t ret = len; | |
| if (len > LOG_LINE_MAX) | |
| return -EINVAL; | |
| buf = kmalloc(len+1, GFP_KERNEL); | |
| if (buf == NULL) | |
| return -ENOMEM; | |
| line = buf; | |
| for (i = 0; i < count; i++) { | |
| if (copy_from_user(line, iv[i].iov_base, iv[i].iov_len)) | |
| goto out; | |
| line += iv[i].iov_len; | |
| } | |
| /* | |
| * Extract and skip the syslog prefix <[0-9]*>. Coming from userspace | |
| * the decimal value represents 32bit, the lower 3 bit are the log | |
| * level, the rest are the log facility. | |
| * | |
| * If no prefix or no userspace facility is specified, we | |
| * enforce LOG_USER, to be able to reliably distinguish | |
| * kernel-generated messages from userspace-injected ones. | |
| */ | |
| line = buf; | |
| if (line[0] == '<') { | |
| char *endp = NULL; | |
| i = simple_strtoul(line+1, &endp, 10); | |
| if (endp && endp[0] == '>') { | |
| level = i & 7; | |
| if (i >> 3) | |
| facility = i >> 3; | |
| endp++; | |
| len -= endp - line; | |
| line = endp; | |
| } | |
| } | |
| line[len] = '\0'; | |
| printk_emit(facility, level, NULL, 0, "%s", line); | |
| out: | |
| kfree(buf); | |
| return ret; | |
| } | |
| static ssize_t devkmsg_read(struct file *file, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct devkmsg_user *user = file->private_data; | |
| struct log *msg; | |
| u64 ts_usec; | |
| size_t i; | |
| size_t len; | |
| ssize_t ret; | |
| if (!user) | |
| return -EBADF; | |
| mutex_lock(&user->lock); | |
| raw_spin_lock(&logbuf_lock); | |
| while (user->seq == log_next_seq) { | |
| if (file->f_flags & O_NONBLOCK) { | |
| ret = -EAGAIN; | |
| raw_spin_unlock(&logbuf_lock); | |
| goto out; | |
| } | |
| raw_spin_unlock(&logbuf_lock); | |
| ret = wait_event_interruptible(log_wait, | |
| user->seq != log_next_seq); | |
| if (ret) | |
| goto out; | |
| raw_spin_lock(&logbuf_lock); | |
| } | |
| if (user->seq < log_first_seq) { | |
| /* our last seen message is gone, return error and reset */ | |
| user->idx = log_first_idx; | |
| user->seq = log_first_seq; | |
| ret = -EPIPE; | |
| raw_spin_unlock(&logbuf_lock); | |
| goto out; | |
| } | |
| msg = log_from_idx(user->idx); | |
| ts_usec = msg->ts_nsec; | |
| do_div(ts_usec, 1000); | |
| len = sprintf(user->buf, "%u,%llu,%llu;", | |
| msg->level, user->seq, ts_usec); | |
| /* escape non-printable characters */ | |
| for (i = 0; i < msg->text_len; i++) { | |
| unsigned char c = log_text(msg)[i]; | |
| if (c < ' ' || c >= 128) | |
| len += sprintf(user->buf + len, "\\x%02x", c); | |
| else | |
| user->buf[len++] = c; | |
| } | |
| user->buf[len++] = '\n'; | |
| if (msg->dict_len) { | |
| bool line = true; | |
| for (i = 0; i < msg->dict_len; i++) { | |
| unsigned char c = log_dict(msg)[i]; | |
| if (line) { | |
| user->buf[len++] = ' '; | |
| line = false; | |
| } | |
| if (c == '\0') { | |
| user->buf[len++] = '\n'; | |
| line = true; | |
| continue; | |
| } | |
| if (c < ' ' || c >= 128) { | |
| len += sprintf(user->buf + len, "\\x%02x", c); | |
| continue; | |
| } | |
| user->buf[len++] = c; | |
| } | |
| user->buf[len++] = '\n'; | |
| } | |
| user->idx = log_next(user->idx); | |
| user->seq++; | |
| raw_spin_unlock(&logbuf_lock); | |
| if (len > count) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (copy_to_user(buf, user->buf, len)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| ret = len; | |
| out: | |
| mutex_unlock(&user->lock); | |
| return ret; | |
| } | |
| static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) | |
| { | |
| struct devkmsg_user *user = file->private_data; | |
| loff_t ret = 0; | |
| if (!user) | |
| return -EBADF; | |
| if (offset) | |
| return -ESPIPE; | |
| raw_spin_lock(&logbuf_lock); | |
| switch (whence) { | |
| case SEEK_SET: | |
| /* the first record */ | |
| user->idx = log_first_idx; | |
| user->seq = log_first_seq; | |
| break; | |
| case SEEK_DATA: | |
| /* | |
| * The first record after the last SYSLOG_ACTION_CLEAR, | |
| * like issued by 'dmesg -c'. Reading /dev/kmsg itself | |
| * changes no global state, and does not clear anything. | |
| */ | |
| user->idx = clear_idx; | |
| user->seq = clear_seq; | |
| break; | |
| case SEEK_END: | |
| /* after the last record */ | |
| user->idx = log_next_idx; | |
| user->seq = log_next_seq; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| raw_spin_unlock(&logbuf_lock); | |
| return ret; | |
| } | |
| static unsigned int devkmsg_poll(struct file *file, poll_table *wait) | |
| { | |
| struct devkmsg_user *user = file->private_data; | |
| int ret = 0; | |
| if (!user) | |
| return POLLERR|POLLNVAL; | |
| poll_wait(file, &log_wait, wait); | |
| raw_spin_lock(&logbuf_lock); | |
| if (user->seq < log_next_seq) { | |
| /* return error when data has vanished underneath us */ | |
| if (user->seq < log_first_seq) | |
| ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI; | |
| ret = POLLIN|POLLRDNORM; | |
| } | |
| raw_spin_unlock(&logbuf_lock); | |
| return ret; | |
| } | |
| static int devkmsg_open(struct inode *inode, struct file *file) | |
| { | |
| struct devkmsg_user *user; | |
| int err; | |
| /* write-only does not need any file context */ | |
| if ((file->f_flags & O_ACCMODE) == O_WRONLY) | |
| return 0; | |
| err = security_syslog(SYSLOG_ACTION_READ_ALL); | |
| if (err) | |
| return err; | |
| user = kmalloc(sizeof(struct devkmsg_user), GFP_KERNEL); | |
| if (!user) | |
| return -ENOMEM; | |
| mutex_init(&user->lock); | |
| raw_spin_lock(&logbuf_lock); | |
| user->idx = log_first_idx; | |
| user->seq = log_first_seq; | |
| raw_spin_unlock(&logbuf_lock); | |
| file->private_data = user; | |
| return 0; | |
| } | |
| static int devkmsg_release(struct inode *inode, struct file *file) | |
| { | |
| struct devkmsg_user *user = file->private_data; | |
| if (!user) | |
| return 0; | |
| mutex_destroy(&user->lock); | |
| kfree(user); | |
| return 0; | |
| } | |
| const struct file_operations kmsg_fops = { | |
| .open = devkmsg_open, | |
| .read = devkmsg_read, | |
| .aio_write = devkmsg_writev, | |
| .llseek = devkmsg_llseek, | |
| .poll = devkmsg_poll, | |
| .release = devkmsg_release, | |
| }; | |
| #ifdef CONFIG_KEXEC | |
| /* | |
| * This appends the listed symbols to /proc/vmcoreinfo | |
| * | |
| * /proc/vmcoreinfo is used by various utiilties, like crash and makedumpfile to | |
| * obtain access to symbols that are otherwise very difficult to locate. These | |
| * symbols are specifically used so that utilities can access and extract the | |
| * dmesg log from a vmcore file after a crash. | |
| */ | |
| void log_buf_kexec_setup(void) | |
| { | |
| VMCOREINFO_SYMBOL(log_buf); | |
| VMCOREINFO_SYMBOL(log_buf_len); | |
| VMCOREINFO_SYMBOL(log_first_idx); | |
| VMCOREINFO_SYMBOL(log_next_idx); | |
| } | |
| #endif | |
| /* requested log_buf_len from kernel cmdline */ | |
| static unsigned long __initdata new_log_buf_len; | |
| /* save requested log_buf_len since it's too early to process it */ | |
| static int __init log_buf_len_setup(char *str) | |
| { | |
| unsigned size = memparse(str, &str); | |
| if (size) | |
| size = roundup_pow_of_two(size); | |
| if (size > log_buf_len) | |
| new_log_buf_len = size; | |
| return 0; | |
| } | |
| early_param("log_buf_len", log_buf_len_setup); | |
| void __init setup_log_buf(int early) | |
| { | |
| unsigned long flags; | |
| char *new_log_buf; | |
| int free; | |
| if (!new_log_buf_len) | |
| return; | |
| if (early) { | |
| unsigned long mem; | |
| mem = memblock_alloc(new_log_buf_len, PAGE_SIZE); | |
| if (!mem) | |
| return; | |
| new_log_buf = __va(mem); | |
| } else { | |
| new_log_buf = alloc_bootmem_nopanic(new_log_buf_len); | |
| } | |
| if (unlikely(!new_log_buf)) { | |
| pr_err("log_buf_len: %ld bytes not available\n", | |
| new_log_buf_len); | |
| return; | |
| } | |
| raw_spin_lock_irqsave(&logbuf_lock, flags); | |
| log_buf_len = new_log_buf_len; | |
| log_buf = new_log_buf; | |
| new_log_buf_len = 0; | |
| free = __LOG_BUF_LEN - log_next_idx; | |
| memcpy(log_buf, __log_buf, __LOG_BUF_LEN); | |
| raw_spin_unlock_irqrestore(&logbuf_lock, flags); | |
| pr_info("log_buf_len: %d\n", log_buf_len); | |
| pr_info("early log buf free: %d(%d%%)\n", | |
| free, (free * 100) / __LOG_BUF_LEN); | |
| } | |
| #ifdef CONFIG_BOOT_PRINTK_DELAY | |
| static int boot_delay; /* msecs delay after each printk during bootup */ | |
| static unsigned long long loops_per_msec; /* based on boot_delay */ | |
| static int __init boot_delay_setup(char *str) | |
| { | |
| unsigned long lpj; | |
| lpj = preset_lpj ? preset_lpj : 1000000; /* some guess */ | |
| loops_per_msec = (unsigned long long)lpj / 1000 * HZ; | |
| get_option(&str, &boot_delay); | |
| if (boot_delay > 10 * 1000) | |
| boot_delay = 0; | |
| pr_debug("boot_delay: %u, preset_lpj: %ld, lpj: %lu, " | |
| "HZ: %d, loops_per_msec: %llu\n", | |
| boot_delay, preset_lpj, lpj, HZ, loops_per_msec); | |
| return 1; | |
| } | |
| __setup("boot_delay=", boot_delay_setup); | |
| static void boot_delay_msec(void) | |
| { | |
| unsigned long long k; | |
| unsigned long timeout; | |
| if (boot_delay == 0 || system_state != SYSTEM_BOOTING) | |
| return; | |
| k = (unsigned long long)loops_per_msec * boot_delay; | |
| timeout = jiffies + msecs_to_jiffies(boot_delay); | |
| while (k) { | |
| k--; | |
| cpu_relax(); | |
| /* | |
| * use (volatile) jiffies to prevent | |
| * compiler reduction; loop termination via jiffies | |
| * is secondary and may or may not happen. | |
| */ | |
| if (time_after(jiffies, timeout)) | |
| break; | |
| touch_nmi_watchdog(); | |
| } | |
| } | |
| #else | |
| static inline void boot_delay_msec(void) | |
| { | |
| } | |
| #endif | |
| #ifdef CONFIG_SECURITY_DMESG_RESTRICT | |
| int dmesg_restrict = 1; | |
| #else | |
| int dmesg_restrict; | |
| #endif | |
| static int syslog_action_restricted(int type) | |
| { | |
| if (dmesg_restrict) | |
| return 1; | |
| /* Unless restricted, we allow "read all" and "get buffer size" for everybody */ | |
| return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER; | |
| } | |
| static int check_syslog_permissions(int type, bool from_file) | |
| { | |
| /* | |
| * If this is from /proc/kmsg and we've already opened it, then we've | |
| * already done the capabilities checks at open time. | |
| */ | |
| if (from_file && type != SYSLOG_ACTION_OPEN) | |
| return 0; | |
| if (syslog_action_restricted(type)) { | |
| if (capable(CAP_SYSLOG)) | |
| return 0; | |
| /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */ | |
| if (capable(CAP_SYS_ADMIN)) { | |
| printk_once(KERN_WARNING "%s (%d): " | |
| "Attempt to access syslog with CAP_SYS_ADMIN " | |
| "but no CAP_SYSLOG (deprecated).\n", | |
| current->comm, task_pid_nr(current)); | |
| return 0; | |
| } | |
| return -EPERM; | |
| } | |
| return 0; | |
| } | |
| #if defined(CONFIG_PRINTK_TIME) | |
| static bool printk_time = 1; | |
| #else | |
| static bool printk_time; | |
| #endif | |
| module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR); | |
| static size_t print_prefix(const struct log *msg, bool syslog, char *buf) | |
| { | |
| size_t len = 0; | |
| if (syslog) { | |
| if (buf) { | |
| len += sprintf(buf, "<%u>", msg->level); | |
| } else { | |
| len += 3; | |
| if (msg->level > 9) | |
| len++; | |
| if (msg->level > 99) | |
| len++; | |
| } | |
| } | |
| if (printk_time) { | |
| if (buf) { | |
| unsigned long long ts = msg->ts_nsec; | |
| unsigned long rem_nsec = do_div(ts, 1000000000); | |
| len += sprintf(buf + len, "[%5lu.%06lu] ", | |
| (unsigned long) ts, rem_nsec / 1000); | |
| } else { | |
| len += 15; | |
| } | |
| } | |
| return len; | |
| } | |
| static size_t msg_print_text(const struct log *msg, bool syslog, | |
| char *buf, size_t size) | |
| { | |
| const char *text = log_text(msg); | |
| size_t text_size = msg->text_len; | |
| size_t len = 0; | |
| do { | |
| const char *next = memchr(text, '\n', text_size); | |
| size_t text_len; | |
| if (next) { | |
| text_len = next - text; | |
| next++; | |
| text_size -= next - text; | |
| } else { | |
| text_len = text_size; | |
| } | |
| if (buf) { | |
| if (print_prefix(msg, syslog, NULL) + | |
| text_len + 1>= size - len) | |
| break; | |
| len += print_prefix(msg, syslog, buf + len); | |
| memcpy(buf + len, text, text_len); | |
| len += text_len; | |
| buf[len++] = '\n'; | |
| } else { | |
| /* SYSLOG_ACTION_* buffer size only calculation */ | |
| len += print_prefix(msg, syslog, NULL); | |
| len += text_len + 1; | |
| } | |
| text = next; | |
| } while (text); | |
| return len; | |
| } | |
| static int syslog_print(char __user *buf, int size) | |
| { | |
| char *text; | |
| struct log *msg; | |
| int len; | |
| text = kmalloc(LOG_LINE_MAX, GFP_KERNEL); | |
| if (!text) | |
| return -ENOMEM; | |
| raw_spin_lock_irq(&logbuf_lock); | |
| if (syslog_seq < log_first_seq) { | |
| /* messages are gone, move to first one */ | |
| syslog_seq = log_first_seq; | |
| syslog_idx = log_first_idx; | |
| } | |
| msg = log_from_idx(syslog_idx); | |
| len = msg_print_text(msg, true, text, LOG_LINE_MAX); | |
| syslog_idx = log_next(syslog_idx); | |
| syslog_seq++; | |
| raw_spin_unlock_irq(&logbuf_lock); | |
| if (len > 0 && copy_to_user(buf, text, len)) | |
| len = -EFAULT; | |
| kfree(text); | |
| return len; | |
| } | |
| static int syslog_print_all(char __user *buf, int size, bool clear) | |
| { | |
| char *text; | |
| int len = 0; | |
| text = kmalloc(LOG_LINE_MAX, GFP_KERNEL); | |
| if (!text) | |
| return -ENOMEM; | |
| raw_spin_lock_irq(&logbuf_lock); | |
| if (buf) { | |
| u64 next_seq; | |
| u64 seq; | |
| u32 idx; | |
| if (clear_seq < log_first_seq) { | |
| /* messages are gone, move to first available one */ | |
| clear_seq = log_first_seq; | |
| clear_idx = log_first_idx; | |
| } | |
| /* | |
| * Find first record that fits, including all following records, | |
| * into the user-provided buffer for this dump. | |
| */ | |
| seq = clear_seq; | |
| idx = clear_idx; | |
| while (seq < log_next_seq) { | |
| struct log *msg = log_from_idx(idx); | |
| len += msg_print_text(msg, true, NULL, 0); | |
| idx = log_next(idx); | |
| seq++; | |
| } | |
| seq = clear_seq; | |
| idx = clear_idx; | |
| while (len > size && seq < log_next_seq) { | |
| struct log *msg = log_from_idx(idx); | |
| len -= msg_print_text(msg, true, NULL, 0); | |
| idx = log_next(idx); | |
| seq++; | |
| } | |
| /* last message in this dump */ | |
| next_seq = log_next_seq; | |
| len = 0; | |
| while (len >= 0 && seq < next_seq) { | |
| struct log *msg = log_from_idx(idx); | |
| int textlen; | |
| textlen = msg_print_text(msg, true, text, LOG_LINE_MAX); | |
| if (textlen < 0) { | |
| len = textlen; | |
| break; | |
| } | |
| idx = log_next(idx); | |
| seq++; | |
| raw_spin_unlock_irq(&logbuf_lock); | |
| if (copy_to_user(buf + len, text, textlen)) | |
| len = -EFAULT; | |
| else | |
| len += textlen; | |
| raw_spin_lock_irq(&logbuf_lock); | |
| if (seq < log_first_seq) { | |
| /* messages are gone, move to next one */ | |
| seq = log_first_seq; | |
| idx = log_first_idx; | |
| } | |
| } | |
| } | |
| if (clear) { | |
| clear_seq = log_next_seq; | |
| clear_idx = log_next_idx; | |
| } | |
| raw_spin_unlock_irq(&logbuf_lock); | |
| kfree(text); | |
| return len; | |
| } | |
| int do_syslog(int type, char __user *buf, int len, bool from_file) | |
| { | |
| bool clear = false; | |
| static int saved_console_loglevel = -1; | |
| int error; | |
| error = check_syslog_permissions(type, from_file); | |
| if (error) | |
| goto out; | |
| error = security_syslog(type); | |
| if (error) | |
| return error; | |
| switch (type) { | |
| case SYSLOG_ACTION_CLOSE: /* Close log */ | |
| break; | |
| case SYSLOG_ACTION_OPEN: /* Open log */ | |
| break; | |
| case SYSLOG_ACTION_READ: /* Read from log */ | |
| error = -EINVAL; | |
| if (!buf || len < 0) | |
| goto out; | |
| error = 0; | |
| if (!len) | |
| goto out; | |
| if (!access_ok(VERIFY_WRITE, buf, len)) { | |
| error = -EFAULT; | |
| goto out; | |
| } | |
| error = wait_event_interruptible(log_wait, | |
| syslog_seq != log_next_seq); | |
| if (error) | |
| goto out; | |
| error = syslog_print(buf, len); | |
| break; | |
| /* Read/clear last kernel messages */ | |
| case SYSLOG_ACTION_READ_CLEAR: | |
| clear = true; | |
| /* FALL THRU */ | |
| /* Read last kernel messages */ | |
| case SYSLOG_ACTION_READ_ALL: | |
| error = -EINVAL; | |
| if (!buf || len < 0) | |
| goto out; | |
| error = 0; | |
| if (!len) | |
| goto out; | |
| if (!access_ok(VERIFY_WRITE, buf, len)) { | |
| error = -EFAULT; | |
| goto out; | |
| } | |
| error = syslog_print_all(buf, len, clear); | |
| break; | |
| /* Clear ring buffer */ | |
| case SYSLOG_ACTION_CLEAR: | |
| syslog_print_all(NULL, 0, true); | |
| /* Disable logging to console */ | |
| case SYSLOG_ACTION_CONSOLE_OFF: | |
| if (saved_console_loglevel == -1) | |
| saved_console_loglevel = console_loglevel; | |
| console_loglevel = minimum_console_loglevel; | |
| break; | |
| /* Enable logging to console */ | |
| case SYSLOG_ACTION_CONSOLE_ON: | |
| if (saved_console_loglevel != -1) { | |
| console_loglevel = saved_console_loglevel; | |
| saved_console_loglevel = -1; | |
| } | |
| break; | |
| /* Set level of messages printed to console */ | |
| case SYSLOG_ACTION_CONSOLE_LEVEL: | |
| error = -EINVAL; | |
| if (len < 1 || len > 8) | |
| goto out; | |
| if (len < minimum_console_loglevel) | |
| len = minimum_console_loglevel; | |
| console_loglevel = len; | |
| /* Implicitly re-enable logging to console */ | |
| saved_console_loglevel = -1; | |
| error = 0; | |
| break; | |
| /* Number of chars in the log buffer */ | |
| case SYSLOG_ACTION_SIZE_UNREAD: | |
| raw_spin_lock_irq(&logbuf_lock); | |
| if (syslog_seq < log_first_seq) { | |
| /* messages are gone, move to first one */ | |
| syslog_seq = log_first_seq; | |
| syslog_idx = log_first_idx; | |
| } | |
| if (from_file) { | |
| /* | |
| * Short-cut for poll(/"proc/kmsg") which simply checks | |
| * for pending data, not the size; return the count of | |
| * records, not the length. | |
| */ | |
| error = log_next_idx - syslog_idx; | |
| } else { | |
| u64 seq; | |
| u32 idx; | |
| error = 0; | |
| seq = syslog_seq; | |
| idx = syslog_idx; | |
| while (seq < log_next_seq) { | |
| struct log *msg = log_from_idx(idx); | |
| error += msg_print_text(msg, true, NULL, 0); | |
| idx = log_next(idx); | |
| seq++; | |
| } | |
| } | |
| raw_spin_unlock_irq(&logbuf_lock); | |
| break; | |
| /* Size of the log buffer */ | |
| case SYSLOG_ACTION_SIZE_BUFFER: | |
| error = log_buf_len; | |
| break; | |
| default: | |
| error = -EINVAL; | |
| break; | |
| } | |
| out: | |
| return error; | |
| } | |
| SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) | |
| { | |
| return do_syslog(type, buf, len, SYSLOG_FROM_CALL); | |
| } | |
| #ifdef CONFIG_KGDB_KDB | |
| /* kdb dmesg command needs access to the syslog buffer. do_syslog() | |
| * uses locks so it cannot be used during debugging. Just tell kdb | |
| * where the start and end of the physical and logical logs are. This | |
| * is equivalent to do_syslog(3). | |
| */ | |
| void kdb_syslog_data(char *syslog_data[4]) | |
| { | |
| syslog_data[0] = log_buf; | |
| syslog_data[1] = log_buf + log_buf_len; | |
| syslog_data[2] = log_buf + log_first_idx; | |
| syslog_data[3] = log_buf + log_next_idx; | |
| } | |
| #endif /* CONFIG_KGDB_KDB */ | |
| static bool __read_mostly ignore_loglevel; | |
| static int __init ignore_loglevel_setup(char *str) | |
| { | |
| ignore_loglevel = 1; | |
| printk(KERN_INFO "debug: ignoring loglevel setting.\n"); | |
| return 0; | |
| } | |
| early_param("ignore_loglevel", ignore_loglevel_setup); | |
| module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR); | |
| MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting, to" | |
| "print all kernel messages to the console."); | |
| /* | |
| * Call the console drivers, asking them to write out | |
| * log_buf[start] to log_buf[end - 1]. | |
| * The console_lock must be held. | |
| */ | |
| static void call_console_drivers(int level, const char *text, size_t len) | |
| { | |
| struct console *con; | |
| trace_console(text, 0, len, len); | |
| if (level >= console_loglevel && !ignore_loglevel) | |
| return; | |
| if (!console_drivers) | |
| return; | |
| for_each_console(con) { | |
| if (exclusive_console && con != exclusive_console) | |
| continue; | |
| if (!(con->flags & CON_ENABLED)) | |
| continue; | |
| if (!con->write) | |
| continue; | |
| if (!cpu_online(smp_processor_id()) && | |
| !(con->flags & CON_ANYTIME)) | |
| continue; | |
| con->write(con, text, len); | |
| } | |
| } | |
| /* | |
| * Zap console related locks when oopsing. Only zap at most once | |
| * every 10 seconds, to leave time for slow consoles to print a | |
| * full oops. | |
| */ | |
| static void zap_locks(void) | |
| { | |
| static unsigned long oops_timestamp; | |
| if (time_after_eq(jiffies, oops_timestamp) && | |
| !time_after(jiffies, oops_timestamp + 30 * HZ)) | |
| return; | |
| oops_timestamp = jiffies; | |
| debug_locks_off(); | |
| /* If a crash is occurring, make sure we can't deadlock */ | |
| raw_spin_lock_init(&logbuf_lock); | |
| /* And make sure that we print immediately */ | |
| sema_init(&console_sem, 1); | |
| } | |
| /* Check if we have any console registered that can be called early in boot. */ | |
| static int have_callable_console(void) | |
| { | |
| struct console *con; | |
| for_each_console(con) | |
| if (con->flags & CON_ANYTIME) | |
| return 1; | |
| return 0; | |
| } | |
| /* | |
| * Can we actually use the console at this time on this cpu? | |
| * | |
| * Console drivers may assume that per-cpu resources have | |
| * been allocated. So unless they're explicitly marked as | |
| * being able to cope (CON_ANYTIME) don't call them until | |
| * this CPU is officially up. | |
| */ | |
| static inline int can_use_console(unsigned int cpu) | |
| { | |
| return cpu_online(cpu) || have_callable_console(); | |
| } | |
| /* | |
| * Try to get console ownership to actually show the kernel | |
| * messages from a 'printk'. Return true (and with the | |
| * console_lock held, and 'console_locked' set) if it | |
| * is successful, false otherwise. | |
| * | |
| * This gets called with the 'logbuf_lock' spinlock held and | |
| * interrupts disabled. It should return with 'lockbuf_lock' | |
| * released but interrupts still disabled. | |
| */ | |
| static int console_trylock_for_printk(unsigned int cpu) | |
| __releases(&logbuf_lock) | |
| { | |
| int retval = 0, wake = 0; | |
| if (console_trylock()) { | |
| retval = 1; | |
| /* | |
| * If we can't use the console, we need to release | |
| * the console semaphore by hand to avoid flushing | |
| * the buffer. We need to hold the console semaphore | |
| * in order to do this test safely. | |
| */ | |
| if (!can_use_console(cpu)) { | |
| console_locked = 0; | |
| wake = 1; | |
| retval = 0; | |
| } | |
| } | |
| logbuf_cpu = UINT_MAX; | |
| if (wake) | |
| up(&console_sem); | |
| raw_spin_unlock(&logbuf_lock); | |
| return retval; | |
| } | |
| int printk_delay_msec __read_mostly; | |
| static inline void printk_delay(void) | |
| { | |
| if (unlikely(printk_delay_msec)) { | |
| int m = printk_delay_msec; | |
| while (m--) { | |
| mdelay(1); | |
| touch_nmi_watchdog(); | |
| } | |
| } | |
| } | |
| asmlinkage int vprintk_emit(int facility, int level, | |
| const char *dict, size_t dictlen, | |
| const char *fmt, va_list args) | |
| { | |
| static int recursion_bug; | |
| static char cont_buf[LOG_LINE_MAX]; | |
| static size_t cont_len; | |
| static int cont_level; | |
| static struct task_struct *cont_task; | |
| static char textbuf[LOG_LINE_MAX]; | |
| char *text = textbuf; | |
| size_t text_len; | |
| unsigned long flags; | |
| int this_cpu; | |
| bool newline = false; | |
| bool prefix = false; | |
| int printed_len = 0; | |
| boot_delay_msec(); | |
| printk_delay(); | |
| /* This stops the holder of console_sem just where we want him */ | |
| local_irq_save(flags); | |
| this_cpu = smp_processor_id(); | |
| /* | |
| * Ouch, printk recursed into itself! | |
| */ | |
| if (unlikely(logbuf_cpu == this_cpu)) { | |
| /* | |
| * If a crash is occurring during printk() on this CPU, | |
| * then try to get the crash message out but make sure | |
| * we can't deadlock. Otherwise just return to avoid the | |
| * recursion and return - but flag the recursion so that | |
| * it can be printed at the next appropriate moment: | |
| */ | |
| if (!oops_in_progress && !lockdep_recursing(current)) { | |
| recursion_bug = 1; | |
| goto out_restore_irqs; | |
| } | |
| zap_locks(); | |
| } | |
| lockdep_off(); | |
| raw_spin_lock(&logbuf_lock); | |
| logbuf_cpu = this_cpu; | |
| if (recursion_bug) { | |
| static const char recursion_msg[] = | |
| "BUG: recent printk recursion!"; | |
| recursion_bug = 0; | |
| printed_len += strlen(recursion_msg); | |
| /* emit KERN_CRIT message */ | |
| log_store(0, 2, NULL, 0, recursion_msg, printed_len); | |
| } | |
| /* | |
| * The printf needs to come first; we need the syslog | |
| * prefix which might be passed-in as a parameter. | |
| */ | |
| text_len = vscnprintf(text, sizeof(textbuf), fmt, args); | |
| /* mark and strip a trailing newline */ | |
| if (text_len && text[text_len-1] == '\n') { | |
| text_len--; | |
| newline = true; | |
| } | |
| /* strip syslog prefix and extract log level or control flags */ | |
| if (text[0] == '<' && text[1] && text[2] == '>') { | |
| switch (text[1]) { | |
| case '0' ... '7': | |
| if (level == -1) | |
| level = text[1] - '0'; | |
| case 'd': /* KERN_DEFAULT */ | |
| prefix = true; | |
| case 'c': /* KERN_CONT */ | |
| text += 3; | |
| text_len -= 3; | |
| } | |
| } | |
| if (level == -1) | |
| level = default_message_loglevel; | |
| if (dict) { | |
| prefix = true; | |
| newline = true; | |
| } | |
| if (!newline) { | |
| if (cont_len && (prefix || cont_task != current)) { | |
| /* | |
| * Flush earlier buffer, which is either from a | |
| * different thread, or when we got a new prefix. | |
| */ | |
| log_store(facility, cont_level, NULL, 0, cont_buf, cont_len); | |
| cont_len = 0; | |
| } | |
| if (!cont_len) { | |
| cont_level = level; | |
| cont_task = current; | |
| } | |
| /* buffer or append to earlier buffer from the same thread */ | |
| if (cont_len + text_len > sizeof(cont_buf)) | |
| text_len = sizeof(cont_buf) - cont_len; | |
| memcpy(cont_buf + cont_len, text, text_len); | |
| cont_len += text_len; | |
| } else { | |
| if (cont_len && cont_task == current) { | |
| if (prefix) { | |
| /* | |
| * New prefix from the same thread; flush. We | |
| * either got no earlier newline, or we race | |
| * with an interrupt. | |
| */ | |
| log_store(facility, cont_level, | |
| NULL, 0, cont_buf, cont_len); | |
| cont_len = 0; | |
| } | |
| /* append to the earlier buffer and flush */ | |
| if (cont_len + text_len > sizeof(cont_buf)) | |
| text_len = sizeof(cont_buf) - cont_len; | |
| memcpy(cont_buf + cont_len, text, text_len); | |
| cont_len += text_len; | |
| log_store(facility, cont_level, | |
| NULL, 0, cont_buf, cont_len); | |
| cont_len = 0; | |
| cont_task = NULL; | |
| printed_len = cont_len; | |
| } else { | |
| /* ordinary single and terminated line */ | |
| log_store(facility, level, | |
| dict, dictlen, text, text_len); | |
| printed_len = text_len; | |
| } | |
| } | |
| /* | |
| * Try to acquire and then immediately release the console semaphore. | |
| * The release will print out buffers and wake up /dev/kmsg and syslog() | |
| * users. | |
| * | |
| * The console_trylock_for_printk() function will release 'logbuf_lock' | |
| * regardless of whether it actually gets the console semaphore or not. | |
| */ | |
| if (console_trylock_for_printk(this_cpu)) | |
| console_unlock(); | |
| lockdep_on(); | |
| out_restore_irqs: | |
| local_irq_restore(flags); | |
| return printed_len; | |
| } | |
| EXPORT_SYMBOL(vprintk_emit); | |
| asmlinkage int vprintk(const char *fmt, va_list args) | |
| { | |
| return vprintk_emit(0, -1, NULL, 0, fmt, args); | |
| } | |
| EXPORT_SYMBOL(vprintk); | |
| asmlinkage int printk_emit(int facility, int level, | |
| const char *dict, size_t dictlen, | |
| const char *fmt, ...) | |
| { | |
| va_list args; | |
| int r; | |
| va_start(args, fmt); | |
| r = vprintk_emit(facility, level, dict, dictlen, fmt, args); | |
| va_end(args); | |
| return r; | |
| } | |
| EXPORT_SYMBOL(printk_emit); | |
| /** | |
| * printk - print a kernel message | |
| * @fmt: format string | |
| * | |
| * This is printk(). It can be called from any context. We want it to work. | |
| * | |
| * We try to grab the console_lock. If we succeed, it's easy - we log the | |
| * output and call the console drivers. If we fail to get the semaphore, we | |
| * place the output into the log buffer and return. The current holder of | |
| * the console_sem will notice the new output in console_unlock(); and will | |
| * send it to the consoles before releasing the lock. | |
| * | |
| * One effect of this deferred printing is that code which calls printk() and | |
| * then changes console_loglevel may break. This is because console_loglevel | |
| * is inspected when the actual printing occurs. | |
| * | |
| * See also: | |
| * printf(3) | |
| * | |
| * See the vsnprintf() documentation for format string extensions over C99. | |
| */ | |
| asmlinkage int printk(const char *fmt, ...) | |
| { | |
| va_list args; | |
| int r; | |
| #ifdef CONFIG_KGDB_KDB | |
| if (unlikely(kdb_trap_printk)) { | |
| va_start(args, fmt); | |
| r = vkdb_printf(fmt, args); | |
| va_end(args); | |
| return r; | |
| } | |
| #endif | |
| va_start(args, fmt); | |
| r = vprintk_emit(0, -1, NULL, 0, fmt, args); | |
| va_end(args); | |
| return r; | |
| } | |
| EXPORT_SYMBOL(printk); | |
| #else | |
| #define LOG_LINE_MAX 0 | |
| static struct log *log_from_idx(u32 idx) { return NULL; } | |
| static u32 log_next(u32 idx) { return 0; } | |
| static void call_console_drivers(int level, const char *text, size_t len) {} | |
| static size_t msg_print_text(const struct log *msg, bool syslog, | |
| char *buf, size_t size) { return 0; } | |
| #endif /* CONFIG_PRINTK */ | |
| static int __add_preferred_console(char *name, int idx, char *options, | |
| char *brl_options) | |
| { | |
| struct console_cmdline *c; | |
| int i; | |
| /* | |
| * See if this tty is not yet registered, and | |
| * if we have a slot free. | |
| */ | |
| for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) | |
| if (strcmp(console_cmdline[i].name, name) == 0 && | |
| console_cmdline[i].index == idx) { | |
| if (!brl_options) | |
| selected_console = i; | |
| return 0; | |
| } | |
| if (i == MAX_CMDLINECONSOLES) | |
| return -E2BIG; | |
| if (!brl_options) | |
| selected_console = i; | |
| c = &console_cmdline[i]; | |
| strlcpy(c->name, name, sizeof(c->name)); | |
| c->options = options; | |
| #ifdef CONFIG_A11Y_BRAILLE_CONSOLE | |
| c->brl_options = brl_options; | |
| #endif | |
| c->index = idx; | |
| return 0; | |
| } | |
| /* | |
| * Set up a list of consoles. Called from init/main.c | |
| */ | |
| static int __init console_setup(char *str) | |
| { | |
| char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */ | |
| char *s, *options, *brl_options = NULL; | |
| int idx; | |
| #ifdef CONFIG_A11Y_BRAILLE_CONSOLE | |
| if (!memcmp(str, "brl,", 4)) { | |
| brl_options = ""; | |
| str += 4; | |
| } else if (!memcmp(str, "brl=", 4)) { | |
| brl_options = str + 4; | |
| str = strchr(brl_options, ','); | |
| if (!str) { | |
| printk(KERN_ERR "need port name after brl=\n"); | |
| return 1; | |
| } | |
| *(str++) = 0; | |
| } | |
| #endif | |
| /* | |
| * Decode str into name, index, options. | |
| */ | |
| if (str[0] >= '0' && str[0] <= '9') { | |
| strcpy(buf, "ttyS"); | |
| strncpy(buf + 4, str, sizeof(buf) - 5); | |
| } else { | |
| strncpy(buf, str, sizeof(buf) - 1); | |
| } | |
| buf[sizeof(buf) - 1] = 0; | |
| if ((options = strchr(str, ',')) != NULL) | |
| *(options++) = 0; | |
| #ifdef __sparc__ | |
| if (!strcmp(str, "ttya")) | |
| strcpy(buf, "ttyS0"); | |
| if (!strcmp(str, "ttyb")) | |
| strcpy(buf, "ttyS1"); | |
| #endif | |
| for (s = buf; *s; s++) | |
| if ((*s >= '0' && *s <= '9') || *s == ',') | |
| break; | |
| idx = simple_strtoul(s, NULL, 10); | |
| *s = 0; | |
| __add_preferred_console(buf, idx, options, brl_options); | |
| console_set_on_cmdline = 1; | |
| return 1; | |
| } | |
| __setup("console=", console_setup); | |
| /** | |
| * add_preferred_console - add a device to the list of preferred consoles. | |
| * @name: device name | |
| * @idx: device index | |
| * @options: options for this console | |
| * | |
| * The last preferred console added will be used for kernel messages | |
| * and stdin/out/err for init. Normally this is used by console_setup | |
| * above to handle user-supplied console arguments; however it can also | |
| * be used by arch-specific code either to override the user or more | |
| * commonly to provide a default console (ie from PROM variables) when | |
| * the user has not supplied one. | |
| */ | |
| int add_preferred_console(char *name, int idx, char *options) | |
| { | |
| return __add_preferred_console(name, idx, options, NULL); | |
| } | |
| int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options) | |
| { | |
| struct console_cmdline *c; | |
| int i; | |
| for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) | |
| if (strcmp(console_cmdline[i].name, name) == 0 && | |
| console_cmdline[i].index == idx) { | |
| c = &console_cmdline[i]; | |
| strlcpy(c->name, name_new, sizeof(c->name)); | |
| c->name[sizeof(c->name) - 1] = 0; | |
| c->options = options; | |
| c->index = idx_new; | |
| return i; | |
| } | |
| /* not found */ | |
| return -1; | |
| } | |
| bool console_suspend_enabled = 1; | |
| EXPORT_SYMBOL(console_suspend_enabled); | |
| static int __init console_suspend_disable(char *str) | |
| { | |
| console_suspend_enabled = 0; | |
| return 1; | |
| } | |
| __setup("no_console_suspend", console_suspend_disable); | |
| module_param_named(console_suspend, console_suspend_enabled, | |
| bool, S_IRUGO | S_IWUSR); | |
| MODULE_PARM_DESC(console_suspend, "suspend console during suspend" | |
| " and hibernate operations"); | |
| /** | |
| * suspend_console - suspend the console subsystem | |
| * | |
| * This disables printk() while we go into suspend states | |
| */ | |
| void suspend_console(void) | |
| { | |
| if (!console_suspend_enabled) | |
| return; | |
| printk("Suspending console(s) (use no_console_suspend to debug)\n"); | |
| console_lock(); | |
| console_suspended = 1; | |
| up(&console_sem); | |
| } | |
| void resume_console(void) | |
| { | |
| if (!console_suspend_enabled) | |
| return; | |
| down(&console_sem); | |
| console_suspended = 0; | |
| console_unlock(); | |
| } | |
| /** | |
| * console_cpu_notify - print deferred console messages after CPU hotplug | |
| * @self: notifier struct | |
| * @action: CPU hotplug event | |
| * @hcpu: unused | |
| * | |
| * If printk() is called from a CPU that is not online yet, the messages | |
| * will be spooled but will not show up on the console. This function is | |
| * called when a new CPU comes online (or fails to come up), and ensures | |
| * that any such output gets printed. | |
| */ | |
| static int __cpuinit console_cpu_notify(struct notifier_block *self, | |
| unsigned long action, void *hcpu) | |
| { | |
| switch (action) { | |
| case CPU_ONLINE: | |
| case CPU_DEAD: | |
| case CPU_DYING: | |
| case CPU_DOWN_FAILED: | |
| case CPU_UP_CANCELED: | |
| console_lock(); | |
| console_unlock(); | |
| } | |
| return NOTIFY_OK; | |
| } | |
| /** | |
| * console_lock - lock the console system for exclusive use. | |
| * | |
| * Acquires a lock which guarantees that the caller has | |
| * exclusive access to the console system and the console_drivers list. | |
| * | |
| * Can sleep, returns nothing. | |
| */ | |
| void console_lock(void) | |
| { | |
| BUG_ON(in_interrupt()); | |
| down(&console_sem); | |
| if (console_suspended) | |
| return; | |
| console_locked = 1; | |
| console_may_schedule = 1; | |
| } | |
| EXPORT_SYMBOL(console_lock); | |
| /** | |
| * console_trylock - try to lock the console system for exclusive use. | |
| * | |
| * Tried to acquire a lock which guarantees that the caller has | |
| * exclusive access to the console system and the console_drivers list. | |
| * | |
| * returns 1 on success, and 0 on failure to acquire the lock. | |
| */ | |
| int console_trylock(void) | |
| { | |
| if (down_trylock(&console_sem)) | |
| return 0; | |
| if (console_suspended) { | |
| up(&console_sem); | |
| return 0; | |
| } | |
| console_locked = 1; | |
| console_may_schedule = 0; | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(console_trylock); | |
| int is_console_locked(void) | |
| { | |
| return console_locked; | |
| } | |
| /* | |
| * Delayed printk version, for scheduler-internal messages: | |
| */ | |
| #define PRINTK_BUF_SIZE 512 | |
| #define PRINTK_PENDING_WAKEUP 0x01 | |
| #define PRINTK_PENDING_SCHED 0x02 | |
| static DEFINE_PER_CPU(int, printk_pending); | |
| static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf); | |
| void printk_tick(void) | |
| { | |
| if (__this_cpu_read(printk_pending)) { | |
| int pending = __this_cpu_xchg(printk_pending, 0); | |
| if (pending & PRINTK_PENDING_SCHED) { | |
| char *buf = __get_cpu_var(printk_sched_buf); | |
| printk(KERN_WARNING "[sched_delayed] %s", buf); | |
| } | |
| if (pending & PRINTK_PENDING_WAKEUP) | |
| wake_up_interruptible(&log_wait); | |
| } | |
| } | |
| int printk_needs_cpu(int cpu) | |
| { | |
| if (cpu_is_offline(cpu)) | |
| printk_tick(); | |
| return __this_cpu_read(printk_pending); | |
| } | |
| void wake_up_klogd(void) | |
| { | |
| if (waitqueue_active(&log_wait)) | |
| this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP); | |
| } | |
| /* the next printk record to write to the console */ | |
| static u64 console_seq; | |
| static u32 console_idx; | |
| /** | |
| * console_unlock - unlock the console system | |
| * | |
| * Releases the console_lock which the caller holds on the console system | |
| * and the console driver list. | |
| * | |
| * While the console_lock was held, console output may have been buffered | |
| * by printk(). If this is the case, console_unlock(); emits | |
| * the output prior to releasing the lock. | |
| * | |
| * If there is output waiting, we wake /dev/kmsg and syslog() users. | |
| * | |
| * console_unlock(); may be called from any context. | |
| */ | |
| void console_unlock(void) | |
| { | |
| static u64 seen_seq; | |
| unsigned long flags; | |
| bool wake_klogd = false; | |
| bool retry; | |
| if (console_suspended) { | |
| up(&console_sem); | |
| return; | |
| } | |
| console_may_schedule = 0; | |
| again: | |
| for (;;) { | |
| struct log *msg; | |
| static char text[LOG_LINE_MAX]; | |
| size_t len; | |
| int level; | |
| raw_spin_lock_irqsave(&logbuf_lock, flags); | |
| if (seen_seq != log_next_seq) { | |
| wake_klogd = true; | |
| seen_seq = log_next_seq; | |
| } | |
| if (console_seq < log_first_seq) { | |
| /* messages are gone, move to first one */ | |
| console_seq = log_first_seq; | |
| console_idx = log_first_idx; | |
| } | |
| if (console_seq == log_next_seq) | |
| break; | |
| msg = log_from_idx(console_idx); | |
| level = msg->level & 7; | |
| len = msg_print_text(msg, false, text, sizeof(text)); | |
| console_idx = log_next(console_idx); | |
| console_seq++; | |
| raw_spin_unlock(&logbuf_lock); | |
| stop_critical_timings(); /* don't trace print latency */ | |
| call_console_drivers(level, text, len); | |
| start_critical_timings(); | |
| local_irq_restore(flags); | |
| } | |
| console_locked = 0; | |
| /* Release the exclusive_console once it is used */ | |
| if (unlikely(exclusive_console)) | |
| exclusive_console = NULL; | |
| raw_spin_unlock(&logbuf_lock); | |
| up(&console_sem); | |
| /* | |
| * Someone could have filled up the buffer again, so re-check if there's | |
| * something to flush. In case we cannot trylock the console_sem again, | |
| * there's a new owner and the console_unlock() from them will do the | |
| * flush, no worries. | |
| */ | |
| raw_spin_lock(&logbuf_lock); | |
| retry = console_seq != log_next_seq; | |
| raw_spin_unlock_irqrestore(&logbuf_lock, flags); | |
| if (retry && console_trylock()) | |
| goto again; | |
| if (wake_klogd) | |
| wake_up_klogd(); | |
| } | |
| EXPORT_SYMBOL(console_unlock); | |
| /** | |
| * console_conditional_schedule - yield the CPU if required | |
| * | |
| * If the console code is currently allowed to sleep, and | |
| * if this CPU should yield the CPU to another task, do | |
| * so here. | |
| * | |
| * Must be called within console_lock();. | |
| */ | |
| void __sched console_conditional_schedule(void) | |
| { | |
| if (console_may_schedule) | |
| cond_resched(); | |
| } | |
| EXPORT_SYMBOL(console_conditional_schedule); | |
| void console_unblank(void) | |
| { | |
| struct console *c; | |
| /* | |
| * console_unblank can no longer be called in interrupt context unless | |
| * oops_in_progress is set to 1.. | |
| */ | |
| if (oops_in_progress) { | |
| if (down_trylock(&console_sem) != 0) | |
| return; | |
| } else | |
| console_lock(); | |
| console_locked = 1; | |
| console_may_schedule = 0; | |
| for_each_console(c) | |
| if ((c->flags & CON_ENABLED) && c->unblank) | |
| c->unblank(); | |
| console_unlock(); | |
| } | |
| /* | |
| * Return the console tty driver structure and its associated index | |
| */ | |
| struct tty_driver *console_device(int *index) | |
| { | |
| struct console *c; | |
| struct tty_driver *driver = NULL; | |
| console_lock(); | |
| for_each_console(c) { | |
| if (!c->device) | |
| continue; | |
| driver = c->device(c, index); | |
| if (driver) | |
| break; | |
| } | |
| console_unlock(); | |
| return driver; | |
| } | |
| /* | |
| * Prevent further output on the passed console device so that (for example) | |
| * serial drivers can disable console output before suspending a port, and can | |
| * re-enable output afterwards. | |
| */ | |
| void console_stop(struct console *console) | |
| { | |
| console_lock(); | |
| console->flags &= ~CON_ENABLED; | |
| console_unlock(); | |
| } | |
| EXPORT_SYMBOL(console_stop); | |
| void console_start(struct console *console) | |
| { | |
| console_lock(); | |
| console->flags |= CON_ENABLED; | |
| console_unlock(); | |
| } | |
| EXPORT_SYMBOL(console_start); | |
| static int __read_mostly keep_bootcon; | |
| static int __init keep_bootcon_setup(char *str) | |
| { | |
| keep_bootcon = 1; | |
| printk(KERN_INFO "debug: skip boot console de-registration.\n"); | |
| return 0; | |
| } | |
| early_param("keep_bootcon", keep_bootcon_setup); | |
| /* | |
| * The console driver calls this routine during kernel initialization | |
| * to register the console printing procedure with printk() and to | |
| * print any messages that were printed by the kernel before the | |
| * console driver was initialized. | |
| * | |
| * This can happen pretty early during the boot process (because of | |
| * early_printk) - sometimes before setup_arch() completes - be careful | |
| * of what kernel features are used - they may not be initialised yet. | |
| * | |
| * There are two types of consoles - bootconsoles (early_printk) and | |
| * "real" consoles (everything which is not a bootconsole) which are | |
| * handled differently. | |
| * - Any number of bootconsoles can be registered at any time. | |
| * - As soon as a "real" console is registered, all bootconsoles | |
| * will be unregistered automatically. | |
| * - Once a "real" console is registered, any attempt to register a | |
| * bootconsoles will be rejected | |
| */ | |
| void register_console(struct console *newcon) | |
| { | |
| int i; | |
| unsigned long flags; | |
| struct console *bcon = NULL; | |
| /* | |
| * before we register a new CON_BOOT console, make sure we don't | |
| * already have a valid console | |
| */ | |
| if (console_drivers && newcon->flags & CON_BOOT) { | |
| /* find the last or real console */ | |
| for_each_console(bcon) { | |
| if (!(bcon->flags & CON_BOOT)) { | |
| printk(KERN_INFO "Too late to register bootconsole %s%d\n", | |
| newcon->name, newcon->index); | |
| return; | |
| } | |
| } | |
| } | |
| if (console_drivers && console_drivers->flags & CON_BOOT) | |
| bcon = console_drivers; | |
| if (preferred_console < 0 || bcon || !console_drivers) | |
| preferred_console = selected_console; | |
| if (newcon->early_setup) | |
| newcon->early_setup(); | |
| /* | |
| * See if we want to use this console driver. If we | |
| * didn't select a console we take the first one | |
| * that registers here. | |
| */ | |
| if (preferred_console < 0) { | |
| if (newcon->index < 0) | |
| newcon->index = 0; | |
| if (newcon->setup == NULL || | |
| newcon->setup(newcon, NULL) == 0) { | |
| newcon->flags |= CON_ENABLED; | |
| if (newcon->device) { | |
| newcon->flags |= CON_CONSDEV; | |
| preferred_console = 0; | |
| } | |
| } | |
| } | |
| /* | |
| * See if this console matches one we selected on | |
| * the command line. | |
| */ | |
| for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; | |
| i++) { | |
| if (strcmp(console_cmdline[i].name, newcon->name) != 0) | |
| continue; | |
| if (newcon->index >= 0 && | |
| newcon->index != console_cmdline[i].index) | |
| continue; | |
| if (newcon->index < 0) | |
| newcon->index = console_cmdline[i].index; | |
| #ifdef CONFIG_A11Y_BRAILLE_CONSOLE | |
| if (console_cmdline[i].brl_options) { | |
| newcon->flags |= CON_BRL; | |
| braille_register_console(newcon, | |
| console_cmdline[i].index, | |
| console_cmdline[i].options, | |
| console_cmdline[i].brl_options); | |
| return; | |
| } | |
| #endif | |
| if (newcon->setup && | |
| newcon->setup(newcon, console_cmdline[i].options) != 0) | |
| break; | |
| newcon->flags |= CON_ENABLED; | |
| newcon->index = console_cmdline[i].index; | |
| if (i == selected_console) { | |
| newcon->flags |= CON_CONSDEV; | |
| preferred_console = selected_console; | |
| } | |
| break; | |
| } | |
| if (!(newcon->flags & CON_ENABLED)) | |
| return; | |
| /* | |
| * If we have a bootconsole, and are switching to a real console, | |
| * don't print everything out again, since when the boot console, and | |
| * the real console are the same physical device, it's annoying to | |
| * see the beginning boot messages twice | |
| */ | |
| if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) | |
| newcon->flags &= ~CON_PRINTBUFFER; | |
| /* | |
| * Put this console in the list - keep the | |
| * preferred driver at the head of the list. | |
| */ | |
| console_lock(); | |
| if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) { | |
| newcon->next = console_drivers; | |
| console_drivers = newcon; | |
| if (newcon->next) | |
| newcon->next->flags &= ~CON_CONSDEV; | |
| } else { | |
| newcon->next = console_drivers->next; | |
| console_drivers->next = newcon; | |
| } | |
| if (newcon->flags & CON_PRINTBUFFER) { | |
| /* | |
| * console_unlock(); will print out the buffered messages | |
| * for us. | |
| */ | |
| raw_spin_lock_irqsave(&logbuf_lock, flags); | |
| console_seq = syslog_seq; | |
| console_idx = syslog_idx; | |
| raw_spin_unlock_irqrestore(&logbuf_lock, flags); | |
| /* | |
| * We're about to replay the log buffer. Only do this to the | |
| * just-registered console to avoid excessive message spam to | |
| * the already-registered consoles. | |
| */ | |
| exclusive_console = newcon; | |
| } | |
| console_unlock(); | |
| console_sysfs_notify(); | |
| /* | |
| * By unregistering the bootconsoles after we enable the real console | |
| * we get the "console xxx enabled" message on all the consoles - | |
| * boot consoles, real consoles, etc - this is to ensure that end | |
| * users know there might be something in the kernel's log buffer that | |
| * went to the bootconsole (that they do not see on the real console) | |
| */ | |
| if (bcon && | |
| ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) && | |
| !keep_bootcon) { | |
| /* we need to iterate through twice, to make sure we print | |
| * everything out, before we unregister the console(s) | |
| */ | |
| printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n", | |
| newcon->name, newcon->index); | |
| for_each_console(bcon) | |
| if (bcon->flags & CON_BOOT) | |
| unregister_console(bcon); | |
| } else { | |
| printk(KERN_INFO "%sconsole [%s%d] enabled\n", | |
| (newcon->flags & CON_BOOT) ? "boot" : "" , | |
| newcon->name, newcon->index); | |
| } | |
| } | |
| EXPORT_SYMBOL(register_console); | |
| int unregister_console(struct console *console) | |
| { | |
| struct console *a, *b; | |
| int res = 1; | |
| #ifdef CONFIG_A11Y_BRAILLE_CONSOLE | |
| if (console->flags & CON_BRL) | |
| return braille_unregister_console(console); | |
| #endif | |
| console_lock(); | |
| if (console_drivers == console) { | |
| console_drivers=console->next; | |
| res = 0; | |
| } else if (console_drivers) { | |
| for (a=console_drivers->next, b=console_drivers ; | |
| a; b=a, a=b->next) { | |
| if (a == console) { | |
| b->next = a->next; | |
| res = 0; | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * If this isn't the last console and it has CON_CONSDEV set, we | |
| * need to set it on the next preferred console. | |
| */ | |
| if (console_drivers != NULL && console->flags & CON_CONSDEV) | |
| console_drivers->flags |= CON_CONSDEV; | |
| console_unlock(); | |
| console_sysfs_notify(); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(unregister_console); | |
| static int __init printk_late_init(void) | |
| { | |
| struct console *con; | |
| for_each_console(con) { | |
| if (!keep_bootcon && con->flags & CON_BOOT) { | |
| printk(KERN_INFO "turn off boot console %s%d\n", | |
| con->name, con->index); | |
| unregister_console(con); | |
| } | |
| } | |
| hotcpu_notifier(console_cpu_notify, 0); | |
| return 0; | |
| } | |
| late_initcall(printk_late_init); | |
| #if defined CONFIG_PRINTK | |
| int printk_sched(const char *fmt, ...) | |
| { | |
| unsigned long flags; | |
| va_list args; | |
| char *buf; | |
| int r; | |
| local_irq_save(flags); | |
| buf = __get_cpu_var(printk_sched_buf); | |
| va_start(args, fmt); | |
| r = vsnprintf(buf, PRINTK_BUF_SIZE, fmt, args); | |
| va_end(args); | |
| __this_cpu_or(printk_pending, PRINTK_PENDING_SCHED); | |
| local_irq_restore(flags); | |
| return r; | |
| } | |
| /* | |
| * printk rate limiting, lifted from the networking subsystem. | |
| * | |
| * This enforces a rate limit: not more than 10 kernel messages | |
| * every 5s to make a denial-of-service attack impossible. | |
| */ | |
| DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); | |
| int __printk_ratelimit(const char *func) | |
| { | |
| return ___ratelimit(&printk_ratelimit_state, func); | |
| } | |
| EXPORT_SYMBOL(__printk_ratelimit); | |
| /** | |
| * printk_timed_ratelimit - caller-controlled printk ratelimiting | |
| * @caller_jiffies: pointer to caller's state | |
| * @interval_msecs: minimum interval between prints | |
| * | |
| * printk_timed_ratelimit() returns true if more than @interval_msecs | |
| * milliseconds have elapsed since the last time printk_timed_ratelimit() | |
| * returned true. | |
| */ | |
| bool printk_timed_ratelimit(unsigned long *caller_jiffies, | |
| unsigned int interval_msecs) | |
| { | |
| if (*caller_jiffies == 0 | |
| || !time_in_range(jiffies, *caller_jiffies, | |
| *caller_jiffies | |
| + msecs_to_jiffies(interval_msecs))) { | |
| *caller_jiffies = jiffies; | |
| return true; | |
| } | |
| return false; | |
| } | |
| EXPORT_SYMBOL(printk_timed_ratelimit); | |
| static DEFINE_SPINLOCK(dump_list_lock); | |
| static LIST_HEAD(dump_list); | |
| /** | |
| * kmsg_dump_register - register a kernel log dumper. | |
| * @dumper: pointer to the kmsg_dumper structure | |
| * | |
| * Adds a kernel log dumper to the system. The dump callback in the | |
| * structure will be called when the kernel oopses or panics and must be | |
| * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise. | |
| */ | |
| int kmsg_dump_register(struct kmsg_dumper *dumper) | |
| { | |
| unsigned long flags; | |
| int err = -EBUSY; | |
| /* The dump callback needs to be set */ | |
| if (!dumper->dump) | |
| return -EINVAL; | |
| spin_lock_irqsave(&dump_list_lock, flags); | |
| /* Don't allow registering multiple times */ | |
| if (!dumper->registered) { | |
| dumper->registered = 1; | |
| list_add_tail_rcu(&dumper->list, &dump_list); | |
| err = 0; | |
| } | |
| spin_unlock_irqrestore(&dump_list_lock, flags); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(kmsg_dump_register); | |
| /** | |
| * kmsg_dump_unregister - unregister a kmsg dumper. | |
| * @dumper: pointer to the kmsg_dumper structure | |
| * | |
| * Removes a dump device from the system. Returns zero on success and | |
| * %-EINVAL otherwise. | |
| */ | |
| int kmsg_dump_unregister(struct kmsg_dumper *dumper) | |
| { | |
| unsigned long flags; | |
| int err = -EINVAL; | |
| spin_lock_irqsave(&dump_list_lock, flags); | |
| if (dumper->registered) { | |
| dumper->registered = 0; | |
| list_del_rcu(&dumper->list); | |
| err = 0; | |
| } | |
| spin_unlock_irqrestore(&dump_list_lock, flags); | |
| synchronize_rcu(); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(kmsg_dump_unregister); | |
| static bool always_kmsg_dump; | |
| module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR); | |
| /** | |
| * kmsg_dump - dump kernel log to kernel message dumpers. | |
| * @reason: the reason (oops, panic etc) for dumping | |
| * | |
| * Iterate through each of the dump devices and call the oops/panic | |
| * callbacks with the log buffer. | |
| */ | |
| void kmsg_dump(enum kmsg_dump_reason reason) | |
| { | |
| u64 idx; | |
| struct kmsg_dumper *dumper; | |
| const char *s1, *s2; | |
| unsigned long l1, l2; | |
| unsigned long flags; | |
| if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump) | |
| return; | |
| /* Theoretically, the log could move on after we do this, but | |
| there's not a lot we can do about that. The new messages | |
| will overwrite the start of what we dump. */ | |
| raw_spin_lock_irqsave(&logbuf_lock, flags); | |
| if (syslog_seq < log_first_seq) | |
| idx = syslog_idx; | |
| else | |
| idx = log_first_idx; | |
| if (idx > log_next_idx) { | |
| s1 = log_buf; | |
| l1 = log_next_idx; | |
| s2 = log_buf + idx; | |
| l2 = log_buf_len - idx; | |
| } else { | |
| s1 = ""; | |
| l1 = 0; | |
| s2 = log_buf + idx; | |
| l2 = log_next_idx - idx; | |
| } | |
| raw_spin_unlock_irqrestore(&logbuf_lock, flags); | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(dumper, &dump_list, list) | |
| dumper->dump(dumper, reason, s1, l1, s2, l2); | |
| rcu_read_unlock(); | |
| } | |
| #endif |