| /* | 
 |  * ipmi_msghandler.c | 
 |  * | 
 |  * Incoming and outgoing message routing for an IPMI interface. | 
 |  * | 
 |  * Author: MontaVista Software, Inc. | 
 |  *         Corey Minyard <minyard@mvista.com> | 
 |  *         source@mvista.com | 
 |  * | 
 |  * Copyright 2002 MontaVista Software Inc. | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify it | 
 |  *  under the terms of the GNU General Public License as published by the | 
 |  *  Free Software Foundation; either version 2 of the License, or (at your | 
 |  *  option) any later version. | 
 |  * | 
 |  * | 
 |  *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | 
 |  *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | 
 |  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. | 
 |  *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | 
 |  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, | 
 |  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS | 
 |  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | 
 |  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | 
 |  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
 |  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License along | 
 |  *  with this program; if not, write to the Free Software Foundation, Inc., | 
 |  *  675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 | #include <linux/config.h> | 
 | #include <linux/module.h> | 
 | #include <linux/errno.h> | 
 | #include <asm/system.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/ipmi.h> | 
 | #include <linux/ipmi_smi.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/init.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/rcupdate.h> | 
 |  | 
 | #define PFX "IPMI message handler: " | 
 |  | 
 | #define IPMI_DRIVER_VERSION "39.0" | 
 |  | 
 | static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); | 
 | static int ipmi_init_msghandler(void); | 
 |  | 
 | static int initialized = 0; | 
 |  | 
 | #ifdef CONFIG_PROC_FS | 
 | struct proc_dir_entry *proc_ipmi_root = NULL; | 
 | EXPORT_SYMBOL(proc_ipmi_root); | 
 | #endif /* CONFIG_PROC_FS */ | 
 |  | 
 | #define MAX_EVENTS_IN_QUEUE	25 | 
 |  | 
 | /* Don't let a message sit in a queue forever, always time it with at lest | 
 |    the max message timer.  This is in milliseconds. */ | 
 | #define MAX_MSG_TIMEOUT		60000 | 
 |  | 
 |  | 
 | /* | 
 |  * The main "user" data structure. | 
 |  */ | 
 | struct ipmi_user | 
 | { | 
 | 	struct list_head link; | 
 |  | 
 | 	/* Set to "0" when the user is destroyed. */ | 
 | 	int valid; | 
 |  | 
 | 	struct kref refcount; | 
 |  | 
 | 	/* The upper layer that handles receive messages. */ | 
 | 	struct ipmi_user_hndl *handler; | 
 | 	void             *handler_data; | 
 |  | 
 | 	/* The interface this user is bound to. */ | 
 | 	ipmi_smi_t intf; | 
 |  | 
 | 	/* Does this interface receive IPMI events? */ | 
 | 	int gets_events; | 
 | }; | 
 |  | 
 | struct cmd_rcvr | 
 | { | 
 | 	struct list_head link; | 
 |  | 
 | 	ipmi_user_t   user; | 
 | 	unsigned char netfn; | 
 | 	unsigned char cmd; | 
 |  | 
 | 	/* | 
 | 	 * This is used to form a linked lised during mass deletion. | 
 | 	 * Since this is in an RCU list, we cannot use the link above | 
 | 	 * or change any data until the RCU period completes.  So we | 
 | 	 * use this next variable during mass deletion so we can have | 
 | 	 * a list and don't have to wait and restart the search on | 
 | 	 * every individual deletion of a command. */ | 
 | 	struct cmd_rcvr *next; | 
 | }; | 
 |  | 
 | struct seq_table | 
 | { | 
 | 	unsigned int         inuse : 1; | 
 | 	unsigned int         broadcast : 1; | 
 |  | 
 | 	unsigned long        timeout; | 
 | 	unsigned long        orig_timeout; | 
 | 	unsigned int         retries_left; | 
 |  | 
 | 	/* To verify on an incoming send message response that this is | 
 |            the message that the response is for, we keep a sequence id | 
 |            and increment it every time we send a message. */ | 
 | 	long                 seqid; | 
 |  | 
 | 	/* This is held so we can properly respond to the message on a | 
 |            timeout, and it is used to hold the temporary data for | 
 |            retransmission, too. */ | 
 | 	struct ipmi_recv_msg *recv_msg; | 
 | }; | 
 |  | 
 | /* Store the information in a msgid (long) to allow us to find a | 
 |    sequence table entry from the msgid. */ | 
 | #define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff)) | 
 |  | 
 | #define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \ | 
 | 	do {								\ | 
 | 		seq = ((msgid >> 26) & 0x3f);				\ | 
 | 		seqid = (msgid & 0x3fffff);				\ | 
 |         } while (0) | 
 |  | 
 | #define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff) | 
 |  | 
 | struct ipmi_channel | 
 | { | 
 | 	unsigned char medium; | 
 | 	unsigned char protocol; | 
 |  | 
 | 	/* My slave address.  This is initialized to IPMI_BMC_SLAVE_ADDR, | 
 | 	   but may be changed by the user. */ | 
 | 	unsigned char address; | 
 |  | 
 | 	/* My LUN.  This should generally stay the SMS LUN, but just in | 
 | 	   case... */ | 
 | 	unsigned char lun; | 
 | }; | 
 |  | 
 | #ifdef CONFIG_PROC_FS | 
 | struct ipmi_proc_entry | 
 | { | 
 | 	char                   *name; | 
 | 	struct ipmi_proc_entry *next; | 
 | }; | 
 | #endif | 
 |  | 
 | struct bmc_device | 
 | { | 
 | 	struct platform_device *dev; | 
 | 	struct ipmi_device_id  id; | 
 | 	unsigned char          guid[16]; | 
 | 	int                    guid_set; | 
 |  | 
 | 	struct kref	       refcount; | 
 |  | 
 | 	/* bmc device attributes */ | 
 | 	struct device_attribute device_id_attr; | 
 | 	struct device_attribute provides_dev_sdrs_attr; | 
 | 	struct device_attribute revision_attr; | 
 | 	struct device_attribute firmware_rev_attr; | 
 | 	struct device_attribute version_attr; | 
 | 	struct device_attribute add_dev_support_attr; | 
 | 	struct device_attribute manufacturer_id_attr; | 
 | 	struct device_attribute product_id_attr; | 
 | 	struct device_attribute guid_attr; | 
 | 	struct device_attribute aux_firmware_rev_attr; | 
 | }; | 
 |  | 
 | #define IPMI_IPMB_NUM_SEQ	64 | 
 | #define IPMI_MAX_CHANNELS       16 | 
 | struct ipmi_smi | 
 | { | 
 | 	/* What interface number are we? */ | 
 | 	int intf_num; | 
 |  | 
 | 	struct kref refcount; | 
 |  | 
 | 	/* The list of upper layers that are using me.  seq_lock | 
 | 	 * protects this. */ | 
 | 	struct list_head users; | 
 |  | 
 | 	/* Used for wake ups at startup. */ | 
 | 	wait_queue_head_t waitq; | 
 |  | 
 | 	struct bmc_device *bmc; | 
 | 	char *my_dev_name; | 
 |  | 
 | 	/* This is the lower-layer's sender routine. */ | 
 | 	struct ipmi_smi_handlers *handlers; | 
 | 	void                     *send_info; | 
 |  | 
 | #ifdef CONFIG_PROC_FS | 
 | 	/* A list of proc entries for this interface.  This does not | 
 | 	   need a lock, only one thread creates it and only one thread | 
 | 	   destroys it. */ | 
 | 	spinlock_t             proc_entry_lock; | 
 | 	struct ipmi_proc_entry *proc_entries; | 
 | #endif | 
 |  | 
 | 	/* Driver-model device for the system interface. */ | 
 | 	struct device          *si_dev; | 
 |  | 
 | 	/* A table of sequence numbers for this interface.  We use the | 
 |            sequence numbers for IPMB messages that go out of the | 
 |            interface to match them up with their responses.  A routine | 
 |            is called periodically to time the items in this list. */ | 
 | 	spinlock_t       seq_lock; | 
 | 	struct seq_table seq_table[IPMI_IPMB_NUM_SEQ]; | 
 | 	int curr_seq; | 
 |  | 
 | 	/* Messages that were delayed for some reason (out of memory, | 
 |            for instance), will go in here to be processed later in a | 
 |            periodic timer interrupt. */ | 
 | 	spinlock_t       waiting_msgs_lock; | 
 | 	struct list_head waiting_msgs; | 
 |  | 
 | 	/* The list of command receivers that are registered for commands | 
 | 	   on this interface. */ | 
 | 	struct mutex     cmd_rcvrs_mutex; | 
 | 	struct list_head cmd_rcvrs; | 
 |  | 
 | 	/* Events that were queues because no one was there to receive | 
 |            them. */ | 
 | 	spinlock_t       events_lock; /* For dealing with event stuff. */ | 
 | 	struct list_head waiting_events; | 
 | 	unsigned int     waiting_events_count; /* How many events in queue? */ | 
 |  | 
 | 	/* The event receiver for my BMC, only really used at panic | 
 | 	   shutdown as a place to store this. */ | 
 | 	unsigned char event_receiver; | 
 | 	unsigned char event_receiver_lun; | 
 | 	unsigned char local_sel_device; | 
 | 	unsigned char local_event_generator; | 
 |  | 
 | 	/* A cheap hack, if this is non-null and a message to an | 
 | 	   interface comes in with a NULL user, call this routine with | 
 | 	   it.  Note that the message will still be freed by the | 
 | 	   caller.  This only works on the system interface. */ | 
 | 	void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg); | 
 |  | 
 | 	/* When we are scanning the channels for an SMI, this will | 
 | 	   tell which channel we are scanning. */ | 
 | 	int curr_channel; | 
 |  | 
 | 	/* Channel information */ | 
 | 	struct ipmi_channel channels[IPMI_MAX_CHANNELS]; | 
 |  | 
 | 	/* Proc FS stuff. */ | 
 | 	struct proc_dir_entry *proc_dir; | 
 | 	char                  proc_dir_name[10]; | 
 |  | 
 | 	spinlock_t   counter_lock; /* For making counters atomic. */ | 
 |  | 
 | 	/* Commands we got that were invalid. */ | 
 | 	unsigned int sent_invalid_commands; | 
 |  | 
 | 	/* Commands we sent to the MC. */ | 
 | 	unsigned int sent_local_commands; | 
 | 	/* Responses from the MC that were delivered to a user. */ | 
 | 	unsigned int handled_local_responses; | 
 | 	/* Responses from the MC that were not delivered to a user. */ | 
 | 	unsigned int unhandled_local_responses; | 
 |  | 
 | 	/* Commands we sent out to the IPMB bus. */ | 
 | 	unsigned int sent_ipmb_commands; | 
 | 	/* Commands sent on the IPMB that had errors on the SEND CMD */ | 
 | 	unsigned int sent_ipmb_command_errs; | 
 | 	/* Each retransmit increments this count. */ | 
 | 	unsigned int retransmitted_ipmb_commands; | 
 | 	/* When a message times out (runs out of retransmits) this is | 
 |            incremented. */ | 
 | 	unsigned int timed_out_ipmb_commands; | 
 |  | 
 | 	/* This is like above, but for broadcasts.  Broadcasts are | 
 |            *not* included in the above count (they are expected to | 
 |            time out). */ | 
 | 	unsigned int timed_out_ipmb_broadcasts; | 
 |  | 
 | 	/* Responses I have sent to the IPMB bus. */ | 
 | 	unsigned int sent_ipmb_responses; | 
 |  | 
 | 	/* The response was delivered to the user. */ | 
 | 	unsigned int handled_ipmb_responses; | 
 | 	/* The response had invalid data in it. */ | 
 | 	unsigned int invalid_ipmb_responses; | 
 | 	/* The response didn't have anyone waiting for it. */ | 
 | 	unsigned int unhandled_ipmb_responses; | 
 |  | 
 | 	/* Commands we sent out to the IPMB bus. */ | 
 | 	unsigned int sent_lan_commands; | 
 | 	/* Commands sent on the IPMB that had errors on the SEND CMD */ | 
 | 	unsigned int sent_lan_command_errs; | 
 | 	/* Each retransmit increments this count. */ | 
 | 	unsigned int retransmitted_lan_commands; | 
 | 	/* When a message times out (runs out of retransmits) this is | 
 |            incremented. */ | 
 | 	unsigned int timed_out_lan_commands; | 
 |  | 
 | 	/* Responses I have sent to the IPMB bus. */ | 
 | 	unsigned int sent_lan_responses; | 
 |  | 
 | 	/* The response was delivered to the user. */ | 
 | 	unsigned int handled_lan_responses; | 
 | 	/* The response had invalid data in it. */ | 
 | 	unsigned int invalid_lan_responses; | 
 | 	/* The response didn't have anyone waiting for it. */ | 
 | 	unsigned int unhandled_lan_responses; | 
 |  | 
 | 	/* The command was delivered to the user. */ | 
 | 	unsigned int handled_commands; | 
 | 	/* The command had invalid data in it. */ | 
 | 	unsigned int invalid_commands; | 
 | 	/* The command didn't have anyone waiting for it. */ | 
 | 	unsigned int unhandled_commands; | 
 |  | 
 | 	/* Invalid data in an event. */ | 
 | 	unsigned int invalid_events; | 
 | 	/* Events that were received with the proper format. */ | 
 | 	unsigned int events; | 
 | }; | 
 | #define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev) | 
 |  | 
 | /* Used to mark an interface entry that cannot be used but is not a | 
 |  * free entry, either, primarily used at creation and deletion time so | 
 |  * a slot doesn't get reused too quickly. */ | 
 | #define IPMI_INVALID_INTERFACE_ENTRY ((ipmi_smi_t) ((long) 1)) | 
 | #define IPMI_INVALID_INTERFACE(i) (((i) == NULL) \ | 
 | 				   || (i == IPMI_INVALID_INTERFACE_ENTRY)) | 
 |  | 
 | /** | 
 |  * The driver model view of the IPMI messaging driver. | 
 |  */ | 
 | static struct device_driver ipmidriver = { | 
 | 	.name = "ipmi", | 
 | 	.bus = &platform_bus_type | 
 | }; | 
 | static DEFINE_MUTEX(ipmidriver_mutex); | 
 |  | 
 | #define MAX_IPMI_INTERFACES 4 | 
 | static ipmi_smi_t ipmi_interfaces[MAX_IPMI_INTERFACES]; | 
 |  | 
 | /* Directly protects the ipmi_interfaces data structure. */ | 
 | static DEFINE_SPINLOCK(interfaces_lock); | 
 |  | 
 | /* List of watchers that want to know when smi's are added and | 
 |    deleted. */ | 
 | static struct list_head smi_watchers = LIST_HEAD_INIT(smi_watchers); | 
 | static DECLARE_RWSEM(smi_watchers_sem); | 
 |  | 
 |  | 
 | static void free_recv_msg_list(struct list_head *q) | 
 | { | 
 | 	struct ipmi_recv_msg *msg, *msg2; | 
 |  | 
 | 	list_for_each_entry_safe(msg, msg2, q, link) { | 
 | 		list_del(&msg->link); | 
 | 		ipmi_free_recv_msg(msg); | 
 | 	} | 
 | } | 
 |  | 
 | static void clean_up_interface_data(ipmi_smi_t intf) | 
 | { | 
 | 	int              i; | 
 | 	struct cmd_rcvr  *rcvr, *rcvr2; | 
 | 	struct list_head list; | 
 |  | 
 | 	free_recv_msg_list(&intf->waiting_msgs); | 
 | 	free_recv_msg_list(&intf->waiting_events); | 
 |  | 
 | 	/* Wholesale remove all the entries from the list in the | 
 | 	 * interface and wait for RCU to know that none are in use. */ | 
 | 	mutex_lock(&intf->cmd_rcvrs_mutex); | 
 | 	list_add_rcu(&list, &intf->cmd_rcvrs); | 
 | 	list_del_rcu(&intf->cmd_rcvrs); | 
 | 	mutex_unlock(&intf->cmd_rcvrs_mutex); | 
 | 	synchronize_rcu(); | 
 |  | 
 | 	list_for_each_entry_safe(rcvr, rcvr2, &list, link) | 
 | 		kfree(rcvr); | 
 |  | 
 | 	for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { | 
 | 		if ((intf->seq_table[i].inuse) | 
 | 		    && (intf->seq_table[i].recv_msg)) | 
 | 		{ | 
 | 			ipmi_free_recv_msg(intf->seq_table[i].recv_msg); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void intf_free(struct kref *ref) | 
 | { | 
 | 	ipmi_smi_t intf = container_of(ref, struct ipmi_smi, refcount); | 
 |  | 
 | 	clean_up_interface_data(intf); | 
 | 	kfree(intf); | 
 | } | 
 |  | 
 | int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) | 
 | { | 
 | 	int           i; | 
 | 	unsigned long flags; | 
 |  | 
 | 	down_write(&smi_watchers_sem); | 
 | 	list_add(&(watcher->link), &smi_watchers); | 
 | 	up_write(&smi_watchers_sem); | 
 | 	spin_lock_irqsave(&interfaces_lock, flags); | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		ipmi_smi_t intf = ipmi_interfaces[i]; | 
 | 		if (IPMI_INVALID_INTERFACE(intf)) | 
 | 			continue; | 
 | 		spin_unlock_irqrestore(&interfaces_lock, flags); | 
 | 		watcher->new_smi(i, intf->si_dev); | 
 | 		spin_lock_irqsave(&interfaces_lock, flags); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&interfaces_lock, flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) | 
 | { | 
 | 	down_write(&smi_watchers_sem); | 
 | 	list_del(&(watcher->link)); | 
 | 	up_write(&smi_watchers_sem); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | call_smi_watchers(int i, struct device *dev) | 
 | { | 
 | 	struct ipmi_smi_watcher *w; | 
 |  | 
 | 	down_read(&smi_watchers_sem); | 
 | 	list_for_each_entry(w, &smi_watchers, link) { | 
 | 		if (try_module_get(w->owner)) { | 
 | 			w->new_smi(i, dev); | 
 | 			module_put(w->owner); | 
 | 		} | 
 | 	} | 
 | 	up_read(&smi_watchers_sem); | 
 | } | 
 |  | 
 | static int | 
 | ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) | 
 | { | 
 | 	if (addr1->addr_type != addr2->addr_type) | 
 | 		return 0; | 
 |  | 
 | 	if (addr1->channel != addr2->channel) | 
 | 		return 0; | 
 |  | 
 | 	if (addr1->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { | 
 | 		struct ipmi_system_interface_addr *smi_addr1 | 
 | 		    = (struct ipmi_system_interface_addr *) addr1; | 
 | 		struct ipmi_system_interface_addr *smi_addr2 | 
 | 		    = (struct ipmi_system_interface_addr *) addr2; | 
 | 		return (smi_addr1->lun == smi_addr2->lun); | 
 | 	} | 
 |  | 
 | 	if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE) | 
 | 	    || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) | 
 | 	{ | 
 | 		struct ipmi_ipmb_addr *ipmb_addr1 | 
 | 		    = (struct ipmi_ipmb_addr *) addr1; | 
 | 		struct ipmi_ipmb_addr *ipmb_addr2 | 
 | 		    = (struct ipmi_ipmb_addr *) addr2; | 
 |  | 
 | 		return ((ipmb_addr1->slave_addr == ipmb_addr2->slave_addr) | 
 | 			&& (ipmb_addr1->lun == ipmb_addr2->lun)); | 
 | 	} | 
 |  | 
 | 	if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) { | 
 | 		struct ipmi_lan_addr *lan_addr1 | 
 | 			= (struct ipmi_lan_addr *) addr1; | 
 | 		struct ipmi_lan_addr *lan_addr2 | 
 | 		    = (struct ipmi_lan_addr *) addr2; | 
 |  | 
 | 		return ((lan_addr1->remote_SWID == lan_addr2->remote_SWID) | 
 | 			&& (lan_addr1->local_SWID == lan_addr2->local_SWID) | 
 | 			&& (lan_addr1->session_handle | 
 | 			    == lan_addr2->session_handle) | 
 | 			&& (lan_addr1->lun == lan_addr2->lun)); | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | int ipmi_validate_addr(struct ipmi_addr *addr, int len) | 
 | { | 
 | 	if (len < sizeof(struct ipmi_system_interface_addr)) { | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { | 
 | 		if (addr->channel != IPMI_BMC_CHANNEL) | 
 | 			return -EINVAL; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if ((addr->channel == IPMI_BMC_CHANNEL) | 
 | 	    || (addr->channel >= IPMI_MAX_CHANNELS) | 
 | 	    || (addr->channel < 0)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) | 
 | 	    || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) | 
 | 	{ | 
 | 		if (len < sizeof(struct ipmi_ipmb_addr)) { | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { | 
 | 		if (len < sizeof(struct ipmi_lan_addr)) { | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | unsigned int ipmi_addr_length(int addr_type) | 
 | { | 
 | 	if (addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
 | 		return sizeof(struct ipmi_system_interface_addr); | 
 |  | 
 | 	if ((addr_type == IPMI_IPMB_ADDR_TYPE) | 
 | 	    || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) | 
 | 	{ | 
 | 		return sizeof(struct ipmi_ipmb_addr); | 
 | 	} | 
 |  | 
 | 	if (addr_type == IPMI_LAN_ADDR_TYPE) | 
 | 		return sizeof(struct ipmi_lan_addr); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void deliver_response(struct ipmi_recv_msg *msg) | 
 | { | 
 | 	if (!msg->user) { | 
 | 		ipmi_smi_t    intf = msg->user_msg_data; | 
 | 		unsigned long flags; | 
 |  | 
 | 		/* Special handling for NULL users. */ | 
 | 		if (intf->null_user_handler) { | 
 | 			intf->null_user_handler(intf, msg); | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->handled_local_responses++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		} else { | 
 | 			/* No handler, so give up. */ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->unhandled_local_responses++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		} | 
 | 		ipmi_free_recv_msg(msg); | 
 | 	} else { | 
 | 		ipmi_user_t user = msg->user; | 
 | 		user->handler->ipmi_recv_hndl(msg, user->handler_data); | 
 | 	} | 
 | } | 
 |  | 
 | /* Find the next sequence number not being used and add the given | 
 |    message with the given timeout to the sequence table.  This must be | 
 |    called with the interface's seq_lock held. */ | 
 | static int intf_next_seq(ipmi_smi_t           intf, | 
 | 			 struct ipmi_recv_msg *recv_msg, | 
 | 			 unsigned long        timeout, | 
 | 			 int                  retries, | 
 | 			 int                  broadcast, | 
 | 			 unsigned char        *seq, | 
 | 			 long                 *seqid) | 
 | { | 
 | 	int          rv = 0; | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = intf->curr_seq; | 
 | 	     (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; | 
 | 	     i = (i+1)%IPMI_IPMB_NUM_SEQ) | 
 | 	{ | 
 | 		if (!intf->seq_table[i].inuse) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (!intf->seq_table[i].inuse) { | 
 | 		intf->seq_table[i].recv_msg = recv_msg; | 
 |  | 
 | 		/* Start with the maximum timeout, when the send response | 
 | 		   comes in we will start the real timer. */ | 
 | 		intf->seq_table[i].timeout = MAX_MSG_TIMEOUT; | 
 | 		intf->seq_table[i].orig_timeout = timeout; | 
 | 		intf->seq_table[i].retries_left = retries; | 
 | 		intf->seq_table[i].broadcast = broadcast; | 
 | 		intf->seq_table[i].inuse = 1; | 
 | 		intf->seq_table[i].seqid = NEXT_SEQID(intf->seq_table[i].seqid); | 
 | 		*seq = i; | 
 | 		*seqid = intf->seq_table[i].seqid; | 
 | 		intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; | 
 | 	} else { | 
 | 		rv = -EAGAIN; | 
 | 	} | 
 | 	 | 
 | 	return rv; | 
 | } | 
 |  | 
 | /* Return the receive message for the given sequence number and | 
 |    release the sequence number so it can be reused.  Some other data | 
 |    is passed in to be sure the message matches up correctly (to help | 
 |    guard against message coming in after their timeout and the | 
 |    sequence number being reused). */ | 
 | static int intf_find_seq(ipmi_smi_t           intf, | 
 | 			 unsigned char        seq, | 
 | 			 short                channel, | 
 | 			 unsigned char        cmd, | 
 | 			 unsigned char        netfn, | 
 | 			 struct ipmi_addr     *addr, | 
 | 			 struct ipmi_recv_msg **recv_msg) | 
 | { | 
 | 	int           rv = -ENODEV; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (seq >= IPMI_IPMB_NUM_SEQ) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_irqsave(&(intf->seq_lock), flags); | 
 | 	if (intf->seq_table[seq].inuse) { | 
 | 		struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg; | 
 |  | 
 | 		if ((msg->addr.channel == channel) | 
 | 		    && (msg->msg.cmd == cmd) | 
 | 		    && (msg->msg.netfn == netfn) | 
 | 		    && (ipmi_addr_equal(addr, &(msg->addr)))) | 
 | 		{ | 
 | 			*recv_msg = msg; | 
 | 			intf->seq_table[seq].inuse = 0; | 
 | 			rv = 0; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 |  | 
 | /* Start the timer for a specific sequence table entry. */ | 
 | static int intf_start_seq_timer(ipmi_smi_t intf, | 
 | 				long       msgid) | 
 | { | 
 | 	int           rv = -ENODEV; | 
 | 	unsigned long flags; | 
 | 	unsigned char seq; | 
 | 	unsigned long seqid; | 
 |  | 
 |  | 
 | 	GET_SEQ_FROM_MSGID(msgid, seq, seqid); | 
 |  | 
 | 	spin_lock_irqsave(&(intf->seq_lock), flags); | 
 | 	/* We do this verification because the user can be deleted | 
 |            while a message is outstanding. */ | 
 | 	if ((intf->seq_table[seq].inuse) | 
 | 	    && (intf->seq_table[seq].seqid == seqid)) | 
 | 	{ | 
 | 		struct seq_table *ent = &(intf->seq_table[seq]); | 
 | 		ent->timeout = ent->orig_timeout; | 
 | 		rv = 0; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | /* Got an error for the send message for a specific sequence number. */ | 
 | static int intf_err_seq(ipmi_smi_t   intf, | 
 | 			long         msgid, | 
 | 			unsigned int err) | 
 | { | 
 | 	int                  rv = -ENODEV; | 
 | 	unsigned long        flags; | 
 | 	unsigned char        seq; | 
 | 	unsigned long        seqid; | 
 | 	struct ipmi_recv_msg *msg = NULL; | 
 |  | 
 |  | 
 | 	GET_SEQ_FROM_MSGID(msgid, seq, seqid); | 
 |  | 
 | 	spin_lock_irqsave(&(intf->seq_lock), flags); | 
 | 	/* We do this verification because the user can be deleted | 
 |            while a message is outstanding. */ | 
 | 	if ((intf->seq_table[seq].inuse) | 
 | 	    && (intf->seq_table[seq].seqid == seqid)) | 
 | 	{ | 
 | 		struct seq_table *ent = &(intf->seq_table[seq]); | 
 |  | 
 | 		ent->inuse = 0; | 
 | 		msg = ent->recv_msg; | 
 | 		rv = 0; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
 |  | 
 | 	if (msg) { | 
 | 		msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
 | 		msg->msg_data[0] = err; | 
 | 		msg->msg.netfn |= 1; /* Convert to a response. */ | 
 | 		msg->msg.data_len = 1; | 
 | 		msg->msg.data = msg->msg_data; | 
 | 		deliver_response(msg); | 
 | 	} | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 |  | 
 | int ipmi_create_user(unsigned int          if_num, | 
 | 		     struct ipmi_user_hndl *handler, | 
 | 		     void                  *handler_data, | 
 | 		     ipmi_user_t           *user) | 
 | { | 
 | 	unsigned long flags; | 
 | 	ipmi_user_t   new_user; | 
 | 	int           rv = 0; | 
 | 	ipmi_smi_t    intf; | 
 |  | 
 | 	/* There is no module usecount here, because it's not | 
 |            required.  Since this can only be used by and called from | 
 |            other modules, they will implicitly use this module, and | 
 |            thus this can't be removed unless the other modules are | 
 |            removed. */ | 
 |  | 
 | 	if (handler == NULL) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Make sure the driver is actually initialized, this handles | 
 | 	   problems with initialization order. */ | 
 | 	if (!initialized) { | 
 | 		rv = ipmi_init_msghandler(); | 
 | 		if (rv) | 
 | 			return rv; | 
 |  | 
 | 		/* The init code doesn't return an error if it was turned | 
 | 		   off, but it won't initialize.  Check that. */ | 
 | 		if (!initialized) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	new_user = kmalloc(sizeof(*new_user), GFP_KERNEL); | 
 | 	if (!new_user) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock_irqsave(&interfaces_lock, flags); | 
 | 	intf = ipmi_interfaces[if_num]; | 
 | 	if ((if_num >= MAX_IPMI_INTERFACES) || IPMI_INVALID_INTERFACE(intf)) { | 
 | 		spin_unlock_irqrestore(&interfaces_lock, flags); | 
 | 		rv = -EINVAL; | 
 | 		goto out_kfree; | 
 | 	} | 
 |  | 
 | 	/* Note that each existing user holds a refcount to the interface. */ | 
 | 	kref_get(&intf->refcount); | 
 | 	spin_unlock_irqrestore(&interfaces_lock, flags); | 
 |  | 
 | 	kref_init(&new_user->refcount); | 
 | 	new_user->handler = handler; | 
 | 	new_user->handler_data = handler_data; | 
 | 	new_user->intf = intf; | 
 | 	new_user->gets_events = 0; | 
 |  | 
 | 	if (!try_module_get(intf->handlers->owner)) { | 
 | 		rv = -ENODEV; | 
 | 		goto out_kref; | 
 | 	} | 
 |  | 
 | 	if (intf->handlers->inc_usecount) { | 
 | 		rv = intf->handlers->inc_usecount(intf->send_info); | 
 | 		if (rv) { | 
 | 			module_put(intf->handlers->owner); | 
 | 			goto out_kref; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	new_user->valid = 1; | 
 | 	spin_lock_irqsave(&intf->seq_lock, flags); | 
 | 	list_add_rcu(&new_user->link, &intf->users); | 
 | 	spin_unlock_irqrestore(&intf->seq_lock, flags); | 
 | 	*user = new_user; | 
 | 	return 0; | 
 |  | 
 | out_kref: | 
 | 	kref_put(&intf->refcount, intf_free); | 
 | out_kfree: | 
 | 	kfree(new_user); | 
 | 	return rv; | 
 | } | 
 |  | 
 | static void free_user(struct kref *ref) | 
 | { | 
 | 	ipmi_user_t user = container_of(ref, struct ipmi_user, refcount); | 
 | 	kfree(user); | 
 | } | 
 |  | 
 | int ipmi_destroy_user(ipmi_user_t user) | 
 | { | 
 | 	ipmi_smi_t       intf = user->intf; | 
 | 	int              i; | 
 | 	unsigned long    flags; | 
 | 	struct cmd_rcvr  *rcvr; | 
 | 	struct cmd_rcvr  *rcvrs = NULL; | 
 |  | 
 | 	user->valid = 0; | 
 |  | 
 | 	/* Remove the user from the interface's sequence table. */ | 
 | 	spin_lock_irqsave(&intf->seq_lock, flags); | 
 | 	list_del_rcu(&user->link); | 
 |  | 
 | 	for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { | 
 | 		if (intf->seq_table[i].inuse | 
 | 		    && (intf->seq_table[i].recv_msg->user == user)) | 
 | 		{ | 
 | 			intf->seq_table[i].inuse = 0; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&intf->seq_lock, flags); | 
 |  | 
 | 	/* | 
 | 	 * Remove the user from the command receiver's table.  First | 
 | 	 * we build a list of everything (not using the standard link, | 
 | 	 * since other things may be using it till we do | 
 | 	 * synchronize_rcu()) then free everything in that list. | 
 | 	 */ | 
 | 	mutex_lock(&intf->cmd_rcvrs_mutex); | 
 | 	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { | 
 | 		if (rcvr->user == user) { | 
 | 			list_del_rcu(&rcvr->link); | 
 | 			rcvr->next = rcvrs; | 
 | 			rcvrs = rcvr; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&intf->cmd_rcvrs_mutex); | 
 | 	synchronize_rcu(); | 
 | 	while (rcvrs) { | 
 | 		rcvr = rcvrs; | 
 | 		rcvrs = rcvr->next; | 
 | 		kfree(rcvr); | 
 | 	} | 
 |  | 
 | 	module_put(intf->handlers->owner); | 
 | 	if (intf->handlers->dec_usecount) | 
 | 		intf->handlers->dec_usecount(intf->send_info); | 
 |  | 
 | 	kref_put(&intf->refcount, intf_free); | 
 |  | 
 | 	kref_put(&user->refcount, free_user); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void ipmi_get_version(ipmi_user_t   user, | 
 | 		      unsigned char *major, | 
 | 		      unsigned char *minor) | 
 | { | 
 | 	*major = ipmi_version_major(&user->intf->bmc->id); | 
 | 	*minor = ipmi_version_minor(&user->intf->bmc->id); | 
 | } | 
 |  | 
 | int ipmi_set_my_address(ipmi_user_t   user, | 
 | 			unsigned int  channel, | 
 | 			unsigned char address) | 
 | { | 
 | 	if (channel >= IPMI_MAX_CHANNELS) | 
 | 		return -EINVAL; | 
 | 	user->intf->channels[channel].address = address; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ipmi_get_my_address(ipmi_user_t   user, | 
 | 			unsigned int  channel, | 
 | 			unsigned char *address) | 
 | { | 
 | 	if (channel >= IPMI_MAX_CHANNELS) | 
 | 		return -EINVAL; | 
 | 	*address = user->intf->channels[channel].address; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ipmi_set_my_LUN(ipmi_user_t   user, | 
 | 		    unsigned int  channel, | 
 | 		    unsigned char LUN) | 
 | { | 
 | 	if (channel >= IPMI_MAX_CHANNELS) | 
 | 		return -EINVAL; | 
 | 	user->intf->channels[channel].lun = LUN & 0x3; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ipmi_get_my_LUN(ipmi_user_t   user, | 
 | 		    unsigned int  channel, | 
 | 		    unsigned char *address) | 
 | { | 
 | 	if (channel >= IPMI_MAX_CHANNELS) | 
 | 		return -EINVAL; | 
 | 	*address = user->intf->channels[channel].lun; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ipmi_set_gets_events(ipmi_user_t user, int val) | 
 | { | 
 | 	unsigned long        flags; | 
 | 	ipmi_smi_t           intf = user->intf; | 
 | 	struct ipmi_recv_msg *msg, *msg2; | 
 | 	struct list_head     msgs; | 
 |  | 
 | 	INIT_LIST_HEAD(&msgs); | 
 |  | 
 | 	spin_lock_irqsave(&intf->events_lock, flags); | 
 | 	user->gets_events = val; | 
 |  | 
 | 	if (val) { | 
 | 		/* Deliver any queued events. */ | 
 | 		list_for_each_entry_safe(msg, msg2, &intf->waiting_events, | 
 | 					 link) { | 
 | 			list_del(&msg->link); | 
 | 			list_add_tail(&msg->link, &msgs); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Hold the events lock while doing this to preserve order. */ | 
 | 	list_for_each_entry_safe(msg, msg2, &msgs, link) { | 
 | 		msg->user = user; | 
 | 		kref_get(&user->refcount); | 
 | 		deliver_response(msg); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&intf->events_lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t    intf, | 
 | 				      unsigned char netfn, | 
 | 				      unsigned char cmd) | 
 | { | 
 | 	struct cmd_rcvr *rcvr; | 
 |  | 
 | 	list_for_each_entry_rcu(rcvr, &intf->cmd_rcvrs, link) { | 
 | 		if ((rcvr->netfn == netfn) && (rcvr->cmd == cmd)) | 
 | 			return rcvr; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | int ipmi_register_for_cmd(ipmi_user_t   user, | 
 | 			  unsigned char netfn, | 
 | 			  unsigned char cmd) | 
 | { | 
 | 	ipmi_smi_t      intf = user->intf; | 
 | 	struct cmd_rcvr *rcvr; | 
 | 	struct cmd_rcvr *entry; | 
 | 	int             rv = 0; | 
 |  | 
 |  | 
 | 	rcvr = kmalloc(sizeof(*rcvr), GFP_KERNEL); | 
 | 	if (!rcvr) | 
 | 		return -ENOMEM; | 
 | 	rcvr->cmd = cmd; | 
 | 	rcvr->netfn = netfn; | 
 | 	rcvr->user = user; | 
 |  | 
 | 	mutex_lock(&intf->cmd_rcvrs_mutex); | 
 | 	/* Make sure the command/netfn is not already registered. */ | 
 | 	entry = find_cmd_rcvr(intf, netfn, cmd); | 
 | 	if (entry) { | 
 | 		rv = -EBUSY; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	list_add_rcu(&rcvr->link, &intf->cmd_rcvrs); | 
 |  | 
 |  out_unlock: | 
 | 	mutex_unlock(&intf->cmd_rcvrs_mutex); | 
 | 	if (rv) | 
 | 		kfree(rcvr); | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | int ipmi_unregister_for_cmd(ipmi_user_t   user, | 
 | 			    unsigned char netfn, | 
 | 			    unsigned char cmd) | 
 | { | 
 | 	ipmi_smi_t      intf = user->intf; | 
 | 	struct cmd_rcvr *rcvr; | 
 |  | 
 | 	mutex_lock(&intf->cmd_rcvrs_mutex); | 
 | 	/* Make sure the command/netfn is not already registered. */ | 
 | 	rcvr = find_cmd_rcvr(intf, netfn, cmd); | 
 | 	if ((rcvr) && (rcvr->user == user)) { | 
 | 		list_del_rcu(&rcvr->link); | 
 | 		mutex_unlock(&intf->cmd_rcvrs_mutex); | 
 | 		synchronize_rcu(); | 
 | 		kfree(rcvr); | 
 | 		return 0; | 
 | 	} else { | 
 | 		mutex_unlock(&intf->cmd_rcvrs_mutex); | 
 | 		return -ENOENT; | 
 | 	} | 
 | } | 
 |  | 
 | void ipmi_user_set_run_to_completion(ipmi_user_t user, int val) | 
 | { | 
 | 	ipmi_smi_t intf = user->intf; | 
 | 	intf->handlers->set_run_to_completion(intf->send_info, val); | 
 | } | 
 |  | 
 | static unsigned char | 
 | ipmb_checksum(unsigned char *data, int size) | 
 | { | 
 | 	unsigned char csum = 0; | 
 | 	 | 
 | 	for (; size > 0; size--, data++) | 
 | 		csum += *data; | 
 |  | 
 | 	return -csum; | 
 | } | 
 |  | 
 | static inline void format_ipmb_msg(struct ipmi_smi_msg   *smi_msg, | 
 | 				   struct kernel_ipmi_msg *msg, | 
 | 				   struct ipmi_ipmb_addr *ipmb_addr, | 
 | 				   long                  msgid, | 
 | 				   unsigned char         ipmb_seq, | 
 | 				   int                   broadcast, | 
 | 				   unsigned char         source_address, | 
 | 				   unsigned char         source_lun) | 
 | { | 
 | 	int i = broadcast; | 
 |  | 
 | 	/* Format the IPMB header data. */ | 
 | 	smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | 
 | 	smi_msg->data[1] = IPMI_SEND_MSG_CMD; | 
 | 	smi_msg->data[2] = ipmb_addr->channel; | 
 | 	if (broadcast) | 
 | 		smi_msg->data[3] = 0; | 
 | 	smi_msg->data[i+3] = ipmb_addr->slave_addr; | 
 | 	smi_msg->data[i+4] = (msg->netfn << 2) | (ipmb_addr->lun & 0x3); | 
 | 	smi_msg->data[i+5] = ipmb_checksum(&(smi_msg->data[i+3]), 2); | 
 | 	smi_msg->data[i+6] = source_address; | 
 | 	smi_msg->data[i+7] = (ipmb_seq << 2) | source_lun; | 
 | 	smi_msg->data[i+8] = msg->cmd; | 
 |  | 
 | 	/* Now tack on the data to the message. */ | 
 | 	if (msg->data_len > 0) | 
 | 		memcpy(&(smi_msg->data[i+9]), msg->data, | 
 | 		       msg->data_len); | 
 | 	smi_msg->data_size = msg->data_len + 9; | 
 |  | 
 | 	/* Now calculate the checksum and tack it on. */ | 
 | 	smi_msg->data[i+smi_msg->data_size] | 
 | 		= ipmb_checksum(&(smi_msg->data[i+6]), | 
 | 				smi_msg->data_size-6); | 
 |  | 
 | 	/* Add on the checksum size and the offset from the | 
 | 	   broadcast. */ | 
 | 	smi_msg->data_size += 1 + i; | 
 |  | 
 | 	smi_msg->msgid = msgid; | 
 | } | 
 |  | 
 | static inline void format_lan_msg(struct ipmi_smi_msg   *smi_msg, | 
 | 				  struct kernel_ipmi_msg *msg, | 
 | 				  struct ipmi_lan_addr  *lan_addr, | 
 | 				  long                  msgid, | 
 | 				  unsigned char         ipmb_seq, | 
 | 				  unsigned char         source_lun) | 
 | { | 
 | 	/* Format the IPMB header data. */ | 
 | 	smi_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | 
 | 	smi_msg->data[1] = IPMI_SEND_MSG_CMD; | 
 | 	smi_msg->data[2] = lan_addr->channel; | 
 | 	smi_msg->data[3] = lan_addr->session_handle; | 
 | 	smi_msg->data[4] = lan_addr->remote_SWID; | 
 | 	smi_msg->data[5] = (msg->netfn << 2) | (lan_addr->lun & 0x3); | 
 | 	smi_msg->data[6] = ipmb_checksum(&(smi_msg->data[4]), 2); | 
 | 	smi_msg->data[7] = lan_addr->local_SWID; | 
 | 	smi_msg->data[8] = (ipmb_seq << 2) | source_lun; | 
 | 	smi_msg->data[9] = msg->cmd; | 
 |  | 
 | 	/* Now tack on the data to the message. */ | 
 | 	if (msg->data_len > 0) | 
 | 		memcpy(&(smi_msg->data[10]), msg->data, | 
 | 		       msg->data_len); | 
 | 	smi_msg->data_size = msg->data_len + 10; | 
 |  | 
 | 	/* Now calculate the checksum and tack it on. */ | 
 | 	smi_msg->data[smi_msg->data_size] | 
 | 		= ipmb_checksum(&(smi_msg->data[7]), | 
 | 				smi_msg->data_size-7); | 
 |  | 
 | 	/* Add on the checksum size and the offset from the | 
 | 	   broadcast. */ | 
 | 	smi_msg->data_size += 1; | 
 |  | 
 | 	smi_msg->msgid = msgid; | 
 | } | 
 |  | 
 | /* Separate from ipmi_request so that the user does not have to be | 
 |    supplied in certain circumstances (mainly at panic time).  If | 
 |    messages are supplied, they will be freed, even if an error | 
 |    occurs. */ | 
 | static int i_ipmi_request(ipmi_user_t          user, | 
 | 			  ipmi_smi_t           intf, | 
 | 			  struct ipmi_addr     *addr, | 
 | 			  long                 msgid, | 
 | 			  struct kernel_ipmi_msg *msg, | 
 | 			  void                 *user_msg_data, | 
 | 			  void                 *supplied_smi, | 
 | 			  struct ipmi_recv_msg *supplied_recv, | 
 | 			  int                  priority, | 
 | 			  unsigned char        source_address, | 
 | 			  unsigned char        source_lun, | 
 | 			  int                  retries, | 
 | 			  unsigned int         retry_time_ms) | 
 | { | 
 | 	int                  rv = 0; | 
 | 	struct ipmi_smi_msg  *smi_msg; | 
 | 	struct ipmi_recv_msg *recv_msg; | 
 | 	unsigned long        flags; | 
 |  | 
 |  | 
 | 	if (supplied_recv) { | 
 | 		recv_msg = supplied_recv; | 
 | 	} else { | 
 | 		recv_msg = ipmi_alloc_recv_msg(); | 
 | 		if (recv_msg == NULL) { | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 | 	recv_msg->user_msg_data = user_msg_data; | 
 |  | 
 | 	if (supplied_smi) { | 
 | 		smi_msg = (struct ipmi_smi_msg *) supplied_smi; | 
 | 	} else { | 
 | 		smi_msg = ipmi_alloc_smi_msg(); | 
 | 		if (smi_msg == NULL) { | 
 | 			ipmi_free_recv_msg(recv_msg); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	recv_msg->user = user; | 
 | 	if (user) | 
 | 		kref_get(&user->refcount); | 
 | 	recv_msg->msgid = msgid; | 
 | 	/* Store the message to send in the receive message so timeout | 
 | 	   responses can get the proper response data. */ | 
 | 	recv_msg->msg = *msg; | 
 |  | 
 | 	if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { | 
 | 		struct ipmi_system_interface_addr *smi_addr; | 
 |  | 
 | 		if (msg->netfn & 1) { | 
 | 			/* Responses are not allowed to the SMI. */ | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		smi_addr = (struct ipmi_system_interface_addr *) addr; | 
 | 		if (smi_addr->lun > 3) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		memcpy(&recv_msg->addr, smi_addr, sizeof(*smi_addr)); | 
 |  | 
 | 		if ((msg->netfn == IPMI_NETFN_APP_REQUEST) | 
 | 		    && ((msg->cmd == IPMI_SEND_MSG_CMD) | 
 | 			|| (msg->cmd == IPMI_GET_MSG_CMD) | 
 | 			|| (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) | 
 | 		{ | 
 | 			/* We don't let the user do these, since we manage | 
 | 			   the sequence numbers. */ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EMSGSIZE; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		smi_msg->data[0] = (msg->netfn << 2) | (smi_addr->lun & 0x3); | 
 | 		smi_msg->data[1] = msg->cmd; | 
 | 		smi_msg->msgid = msgid; | 
 | 		smi_msg->user_data = recv_msg; | 
 | 		if (msg->data_len > 0) | 
 | 			memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); | 
 | 		smi_msg->data_size = msg->data_len + 2; | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->sent_local_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 	} else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) | 
 | 		   || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) | 
 | 	{ | 
 | 		struct ipmi_ipmb_addr *ipmb_addr; | 
 | 		unsigned char         ipmb_seq; | 
 | 		long                  seqid; | 
 | 		int                   broadcast = 0; | 
 |  | 
 | 		if (addr->channel >= IPMI_MAX_CHANNELS) { | 
 | 		        spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		if (intf->channels[addr->channel].medium | 
 | 		    != IPMI_CHANNEL_MEDIUM_IPMB) | 
 | 		{ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		if (retries < 0) { | 
 | 		    if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) | 
 | 			retries = 0; /* Don't retry broadcasts. */ | 
 | 		    else | 
 | 			retries = 4; | 
 | 		} | 
 | 		if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) { | 
 | 		    /* Broadcasts add a zero at the beginning of the | 
 | 		       message, but otherwise is the same as an IPMB | 
 | 		       address. */ | 
 | 		    addr->addr_type = IPMI_IPMB_ADDR_TYPE; | 
 | 		    broadcast = 1; | 
 | 		} | 
 |  | 
 |  | 
 | 		/* Default to 1 second retries. */ | 
 | 		if (retry_time_ms == 0) | 
 | 		    retry_time_ms = 1000; | 
 |  | 
 | 		/* 9 for the header and 1 for the checksum, plus | 
 |                    possibly one for the broadcast. */ | 
 | 		if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EMSGSIZE; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		ipmb_addr = (struct ipmi_ipmb_addr *) addr; | 
 | 		if (ipmb_addr->lun > 3) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr)); | 
 |  | 
 | 		if (recv_msg->msg.netfn & 0x1) { | 
 | 			/* It's a response, so use the user's sequence | 
 |                            from msgid. */ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_ipmb_responses++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid, | 
 | 					msgid, broadcast, | 
 | 					source_address, source_lun); | 
 |  | 
 | 			/* Save the receive message so we can use it | 
 | 			   to deliver the response. */ | 
 | 			smi_msg->user_data = recv_msg; | 
 | 		} else { | 
 | 			/* It's a command, so get a sequence for it. */ | 
 |  | 
 | 			spin_lock_irqsave(&(intf->seq_lock), flags); | 
 |  | 
 | 			spin_lock(&intf->counter_lock); | 
 | 			intf->sent_ipmb_commands++; | 
 | 			spin_unlock(&intf->counter_lock); | 
 |  | 
 | 			/* Create a sequence number with a 1 second | 
 |                            timeout and 4 retries. */ | 
 | 			rv = intf_next_seq(intf, | 
 | 					   recv_msg, | 
 | 					   retry_time_ms, | 
 | 					   retries, | 
 | 					   broadcast, | 
 | 					   &ipmb_seq, | 
 | 					   &seqid); | 
 | 			if (rv) { | 
 | 				/* We have used up all the sequence numbers, | 
 | 				   probably, so abort. */ | 
 | 				spin_unlock_irqrestore(&(intf->seq_lock), | 
 | 						       flags); | 
 | 				goto out_err; | 
 | 			} | 
 |  | 
 | 			/* Store the sequence number in the message, | 
 |                            so that when the send message response | 
 |                            comes back we can start the timer. */ | 
 | 			format_ipmb_msg(smi_msg, msg, ipmb_addr, | 
 | 					STORE_SEQ_IN_MSGID(ipmb_seq, seqid), | 
 | 					ipmb_seq, broadcast, | 
 | 					source_address, source_lun); | 
 |  | 
 | 			/* Copy the message into the recv message data, so we | 
 | 			   can retransmit it later if necessary. */ | 
 | 			memcpy(recv_msg->msg_data, smi_msg->data, | 
 | 			       smi_msg->data_size); | 
 | 			recv_msg->msg.data = recv_msg->msg_data; | 
 | 			recv_msg->msg.data_len = smi_msg->data_size; | 
 |  | 
 | 			/* We don't unlock until here, because we need | 
 |                            to copy the completed message into the | 
 |                            recv_msg before we release the lock. | 
 |                            Otherwise, race conditions may bite us.  I | 
 |                            know that's pretty paranoid, but I prefer | 
 |                            to be correct. */ | 
 | 			spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
 | 		} | 
 | 	} else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { | 
 | 		struct ipmi_lan_addr  *lan_addr; | 
 | 		unsigned char         ipmb_seq; | 
 | 		long                  seqid; | 
 |  | 
 | 		if (addr->channel >= IPMI_MAX_CHANNELS) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		if ((intf->channels[addr->channel].medium | 
 | 		    != IPMI_CHANNEL_MEDIUM_8023LAN) | 
 | 		    && (intf->channels[addr->channel].medium | 
 | 			!= IPMI_CHANNEL_MEDIUM_ASYNC)) | 
 | 		{ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		retries = 4; | 
 |  | 
 | 		/* Default to 1 second retries. */ | 
 | 		if (retry_time_ms == 0) | 
 | 		    retry_time_ms = 1000; | 
 |  | 
 | 		/* 11 for the header and 1 for the checksum. */ | 
 | 		if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EMSGSIZE; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		lan_addr = (struct ipmi_lan_addr *) addr; | 
 | 		if (lan_addr->lun > 3) { | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_invalid_commands++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			rv = -EINVAL; | 
 | 			goto out_err; | 
 | 		} | 
 |  | 
 | 		memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr)); | 
 |  | 
 | 		if (recv_msg->msg.netfn & 0x1) { | 
 | 			/* It's a response, so use the user's sequence | 
 |                            from msgid. */ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			intf->sent_lan_responses++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			format_lan_msg(smi_msg, msg, lan_addr, msgid, | 
 | 				       msgid, source_lun); | 
 |  | 
 | 			/* Save the receive message so we can use it | 
 | 			   to deliver the response. */ | 
 | 			smi_msg->user_data = recv_msg; | 
 | 		} else { | 
 | 			/* It's a command, so get a sequence for it. */ | 
 |  | 
 | 			spin_lock_irqsave(&(intf->seq_lock), flags); | 
 |  | 
 | 			spin_lock(&intf->counter_lock); | 
 | 			intf->sent_lan_commands++; | 
 | 			spin_unlock(&intf->counter_lock); | 
 |  | 
 | 			/* Create a sequence number with a 1 second | 
 |                            timeout and 4 retries. */ | 
 | 			rv = intf_next_seq(intf, | 
 | 					   recv_msg, | 
 | 					   retry_time_ms, | 
 | 					   retries, | 
 | 					   0, | 
 | 					   &ipmb_seq, | 
 | 					   &seqid); | 
 | 			if (rv) { | 
 | 				/* We have used up all the sequence numbers, | 
 | 				   probably, so abort. */ | 
 | 				spin_unlock_irqrestore(&(intf->seq_lock), | 
 | 						       flags); | 
 | 				goto out_err; | 
 | 			} | 
 |  | 
 | 			/* Store the sequence number in the message, | 
 |                            so that when the send message response | 
 |                            comes back we can start the timer. */ | 
 | 			format_lan_msg(smi_msg, msg, lan_addr, | 
 | 				       STORE_SEQ_IN_MSGID(ipmb_seq, seqid), | 
 | 				       ipmb_seq, source_lun); | 
 |  | 
 | 			/* Copy the message into the recv message data, so we | 
 | 			   can retransmit it later if necessary. */ | 
 | 			memcpy(recv_msg->msg_data, smi_msg->data, | 
 | 			       smi_msg->data_size); | 
 | 			recv_msg->msg.data = recv_msg->msg_data; | 
 | 			recv_msg->msg.data_len = smi_msg->data_size; | 
 |  | 
 | 			/* We don't unlock until here, because we need | 
 |                            to copy the completed message into the | 
 |                            recv_msg before we release the lock. | 
 |                            Otherwise, race conditions may bite us.  I | 
 |                            know that's pretty paranoid, but I prefer | 
 |                            to be correct. */ | 
 | 			spin_unlock_irqrestore(&(intf->seq_lock), flags); | 
 | 		} | 
 | 	} else { | 
 | 	    /* Unknown address type. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->sent_invalid_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		rv = -EINVAL; | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | #ifdef DEBUG_MSGING | 
 | 	{ | 
 | 		int m; | 
 | 		for (m = 0; m < smi_msg->data_size; m++) | 
 | 			printk(" %2.2x", smi_msg->data[m]); | 
 | 		printk("\n"); | 
 | 	} | 
 | #endif | 
 | 	intf->handlers->sender(intf->send_info, smi_msg, priority); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  out_err: | 
 | 	ipmi_free_smi_msg(smi_msg); | 
 | 	ipmi_free_recv_msg(recv_msg); | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int check_addr(ipmi_smi_t       intf, | 
 | 		      struct ipmi_addr *addr, | 
 | 		      unsigned char    *saddr, | 
 | 		      unsigned char    *lun) | 
 | { | 
 | 	if (addr->channel >= IPMI_MAX_CHANNELS) | 
 | 		return -EINVAL; | 
 | 	*lun = intf->channels[addr->channel].lun; | 
 | 	*saddr = intf->channels[addr->channel].address; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int ipmi_request_settime(ipmi_user_t      user, | 
 | 			 struct ipmi_addr *addr, | 
 | 			 long             msgid, | 
 | 			 struct kernel_ipmi_msg  *msg, | 
 | 			 void             *user_msg_data, | 
 | 			 int              priority, | 
 | 			 int              retries, | 
 | 			 unsigned int     retry_time_ms) | 
 | { | 
 | 	unsigned char saddr, lun; | 
 | 	int           rv; | 
 |  | 
 | 	if (!user) | 
 | 		return -EINVAL; | 
 | 	rv = check_addr(user->intf, addr, &saddr, &lun); | 
 | 	if (rv) | 
 | 		return rv; | 
 | 	return i_ipmi_request(user, | 
 | 			      user->intf, | 
 | 			      addr, | 
 | 			      msgid, | 
 | 			      msg, | 
 | 			      user_msg_data, | 
 | 			      NULL, NULL, | 
 | 			      priority, | 
 | 			      saddr, | 
 | 			      lun, | 
 | 			      retries, | 
 | 			      retry_time_ms); | 
 | } | 
 |  | 
 | int ipmi_request_supply_msgs(ipmi_user_t          user, | 
 | 			     struct ipmi_addr     *addr, | 
 | 			     long                 msgid, | 
 | 			     struct kernel_ipmi_msg *msg, | 
 | 			     void                 *user_msg_data, | 
 | 			     void                 *supplied_smi, | 
 | 			     struct ipmi_recv_msg *supplied_recv, | 
 | 			     int                  priority) | 
 | { | 
 | 	unsigned char saddr, lun; | 
 | 	int           rv; | 
 |  | 
 | 	if (!user) | 
 | 		return -EINVAL; | 
 | 	rv = check_addr(user->intf, addr, &saddr, &lun); | 
 | 	if (rv) | 
 | 		return rv; | 
 | 	return i_ipmi_request(user, | 
 | 			      user->intf, | 
 | 			      addr, | 
 | 			      msgid, | 
 | 			      msg, | 
 | 			      user_msg_data, | 
 | 			      supplied_smi, | 
 | 			      supplied_recv, | 
 | 			      priority, | 
 | 			      saddr, | 
 | 			      lun, | 
 | 			      -1, 0); | 
 | } | 
 |  | 
 | static int ipmb_file_read_proc(char *page, char **start, off_t off, | 
 | 			       int count, int *eof, void *data) | 
 | { | 
 | 	char       *out = (char *) page; | 
 | 	ipmi_smi_t intf = data; | 
 | 	int        i; | 
 | 	int        rv = 0; | 
 |  | 
 | 	for (i = 0; i < IPMI_MAX_CHANNELS; i++) | 
 | 		rv += sprintf(out+rv, "%x ", intf->channels[i].address); | 
 | 	out[rv-1] = '\n'; /* Replace the final space with a newline */ | 
 | 	out[rv] = '\0'; | 
 | 	rv++; | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int version_file_read_proc(char *page, char **start, off_t off, | 
 | 				  int count, int *eof, void *data) | 
 | { | 
 | 	char       *out = (char *) page; | 
 | 	ipmi_smi_t intf = data; | 
 |  | 
 | 	return sprintf(out, "%d.%d\n", | 
 | 		       ipmi_version_major(&intf->bmc->id), | 
 | 		       ipmi_version_minor(&intf->bmc->id)); | 
 | } | 
 |  | 
 | static int stat_file_read_proc(char *page, char **start, off_t off, | 
 | 			       int count, int *eof, void *data) | 
 | { | 
 | 	char       *out = (char *) page; | 
 | 	ipmi_smi_t intf = data; | 
 |  | 
 | 	out += sprintf(out, "sent_invalid_commands:       %d\n", | 
 | 		       intf->sent_invalid_commands); | 
 | 	out += sprintf(out, "sent_local_commands:         %d\n", | 
 | 		       intf->sent_local_commands); | 
 | 	out += sprintf(out, "handled_local_responses:     %d\n", | 
 | 		       intf->handled_local_responses); | 
 | 	out += sprintf(out, "unhandled_local_responses:   %d\n", | 
 | 		       intf->unhandled_local_responses); | 
 | 	out += sprintf(out, "sent_ipmb_commands:          %d\n", | 
 | 		       intf->sent_ipmb_commands); | 
 | 	out += sprintf(out, "sent_ipmb_command_errs:      %d\n", | 
 | 		       intf->sent_ipmb_command_errs); | 
 | 	out += sprintf(out, "retransmitted_ipmb_commands: %d\n", | 
 | 		       intf->retransmitted_ipmb_commands); | 
 | 	out += sprintf(out, "timed_out_ipmb_commands:     %d\n", | 
 | 		       intf->timed_out_ipmb_commands); | 
 | 	out += sprintf(out, "timed_out_ipmb_broadcasts:   %d\n", | 
 | 		       intf->timed_out_ipmb_broadcasts); | 
 | 	out += sprintf(out, "sent_ipmb_responses:         %d\n", | 
 | 		       intf->sent_ipmb_responses); | 
 | 	out += sprintf(out, "handled_ipmb_responses:      %d\n", | 
 | 		       intf->handled_ipmb_responses); | 
 | 	out += sprintf(out, "invalid_ipmb_responses:      %d\n", | 
 | 		       intf->invalid_ipmb_responses); | 
 | 	out += sprintf(out, "unhandled_ipmb_responses:    %d\n", | 
 | 		       intf->unhandled_ipmb_responses); | 
 | 	out += sprintf(out, "sent_lan_commands:           %d\n", | 
 | 		       intf->sent_lan_commands); | 
 | 	out += sprintf(out, "sent_lan_command_errs:       %d\n", | 
 | 		       intf->sent_lan_command_errs); | 
 | 	out += sprintf(out, "retransmitted_lan_commands:  %d\n", | 
 | 		       intf->retransmitted_lan_commands); | 
 | 	out += sprintf(out, "timed_out_lan_commands:      %d\n", | 
 | 		       intf->timed_out_lan_commands); | 
 | 	out += sprintf(out, "sent_lan_responses:          %d\n", | 
 | 		       intf->sent_lan_responses); | 
 | 	out += sprintf(out, "handled_lan_responses:       %d\n", | 
 | 		       intf->handled_lan_responses); | 
 | 	out += sprintf(out, "invalid_lan_responses:       %d\n", | 
 | 		       intf->invalid_lan_responses); | 
 | 	out += sprintf(out, "unhandled_lan_responses:     %d\n", | 
 | 		       intf->unhandled_lan_responses); | 
 | 	out += sprintf(out, "handled_commands:            %d\n", | 
 | 		       intf->handled_commands); | 
 | 	out += sprintf(out, "invalid_commands:            %d\n", | 
 | 		       intf->invalid_commands); | 
 | 	out += sprintf(out, "unhandled_commands:          %d\n", | 
 | 		       intf->unhandled_commands); | 
 | 	out += sprintf(out, "invalid_events:              %d\n", | 
 | 		       intf->invalid_events); | 
 | 	out += sprintf(out, "events:                      %d\n", | 
 | 		       intf->events); | 
 |  | 
 | 	return (out - ((char *) page)); | 
 | } | 
 |  | 
 | int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, | 
 | 			    read_proc_t *read_proc, write_proc_t *write_proc, | 
 | 			    void *data, struct module *owner) | 
 | { | 
 | 	int                    rv = 0; | 
 | #ifdef CONFIG_PROC_FS | 
 | 	struct proc_dir_entry  *file; | 
 | 	struct ipmi_proc_entry *entry; | 
 |  | 
 | 	/* Create a list element. */ | 
 | 	entry = kmalloc(sizeof(*entry), GFP_KERNEL); | 
 | 	if (!entry) | 
 | 		return -ENOMEM; | 
 | 	entry->name = kmalloc(strlen(name)+1, GFP_KERNEL); | 
 | 	if (!entry->name) { | 
 | 		kfree(entry); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	strcpy(entry->name, name); | 
 |  | 
 | 	file = create_proc_entry(name, 0, smi->proc_dir); | 
 | 	if (!file) { | 
 | 		kfree(entry->name); | 
 | 		kfree(entry); | 
 | 		rv = -ENOMEM; | 
 | 	} else { | 
 | 		file->nlink = 1; | 
 | 		file->data = data; | 
 | 		file->read_proc = read_proc; | 
 | 		file->write_proc = write_proc; | 
 | 		file->owner = owner; | 
 |  | 
 | 		spin_lock(&smi->proc_entry_lock); | 
 | 		/* Stick it on the list. */ | 
 | 		entry->next = smi->proc_entries; | 
 | 		smi->proc_entries = entry; | 
 | 		spin_unlock(&smi->proc_entry_lock); | 
 | 	} | 
 | #endif /* CONFIG_PROC_FS */ | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int add_proc_entries(ipmi_smi_t smi, int num) | 
 | { | 
 | 	int rv = 0; | 
 |  | 
 | #ifdef CONFIG_PROC_FS | 
 | 	sprintf(smi->proc_dir_name, "%d", num); | 
 | 	smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root); | 
 | 	if (!smi->proc_dir) | 
 | 		rv = -ENOMEM; | 
 | 	else { | 
 | 		smi->proc_dir->owner = THIS_MODULE; | 
 | 	} | 
 |  | 
 | 	if (rv == 0) | 
 | 		rv = ipmi_smi_add_proc_entry(smi, "stats", | 
 | 					     stat_file_read_proc, NULL, | 
 | 					     smi, THIS_MODULE); | 
 |  | 
 | 	if (rv == 0) | 
 | 		rv = ipmi_smi_add_proc_entry(smi, "ipmb", | 
 | 					     ipmb_file_read_proc, NULL, | 
 | 					     smi, THIS_MODULE); | 
 |  | 
 | 	if (rv == 0) | 
 | 		rv = ipmi_smi_add_proc_entry(smi, "version", | 
 | 					     version_file_read_proc, NULL, | 
 | 					     smi, THIS_MODULE); | 
 | #endif /* CONFIG_PROC_FS */ | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | static void remove_proc_entries(ipmi_smi_t smi) | 
 | { | 
 | #ifdef CONFIG_PROC_FS | 
 | 	struct ipmi_proc_entry *entry; | 
 |  | 
 | 	spin_lock(&smi->proc_entry_lock); | 
 | 	while (smi->proc_entries) { | 
 | 		entry = smi->proc_entries; | 
 | 		smi->proc_entries = entry->next; | 
 |  | 
 | 		remove_proc_entry(entry->name, smi->proc_dir); | 
 | 		kfree(entry->name); | 
 | 		kfree(entry); | 
 | 	} | 
 | 	spin_unlock(&smi->proc_entry_lock); | 
 | 	remove_proc_entry(smi->proc_dir_name, proc_ipmi_root); | 
 | #endif /* CONFIG_PROC_FS */ | 
 | } | 
 |  | 
 | static int __find_bmc_guid(struct device *dev, void *data) | 
 | { | 
 | 	unsigned char *id = data; | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 | 	return memcmp(bmc->guid, id, 16) == 0; | 
 | } | 
 |  | 
 | static struct bmc_device *ipmi_find_bmc_guid(struct device_driver *drv, | 
 | 					     unsigned char *guid) | 
 | { | 
 | 	struct device *dev; | 
 |  | 
 | 	dev = driver_find_device(drv, NULL, guid, __find_bmc_guid); | 
 | 	if (dev) | 
 | 		return dev_get_drvdata(dev); | 
 | 	else | 
 | 		return NULL; | 
 | } | 
 |  | 
 | struct prod_dev_id { | 
 | 	unsigned int  product_id; | 
 | 	unsigned char device_id; | 
 | }; | 
 |  | 
 | static int __find_bmc_prod_dev_id(struct device *dev, void *data) | 
 | { | 
 | 	struct prod_dev_id *id = data; | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return (bmc->id.product_id == id->product_id | 
 | 		&& bmc->id.product_id == id->product_id | 
 | 		&& bmc->id.device_id == id->device_id); | 
 | } | 
 |  | 
 | static struct bmc_device *ipmi_find_bmc_prod_dev_id( | 
 | 	struct device_driver *drv, | 
 | 	unsigned char product_id, unsigned char device_id) | 
 | { | 
 | 	struct prod_dev_id id = { | 
 | 		.product_id = product_id, | 
 | 		.device_id = device_id, | 
 | 	}; | 
 | 	struct device *dev; | 
 |  | 
 | 	dev = driver_find_device(drv, NULL, &id, __find_bmc_prod_dev_id); | 
 | 	if (dev) | 
 | 		return dev_get_drvdata(dev); | 
 | 	else | 
 | 		return NULL; | 
 | } | 
 |  | 
 | static ssize_t device_id_show(struct device *dev, | 
 | 			      struct device_attribute *attr, | 
 | 			      char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 10, "%u\n", bmc->id.device_id); | 
 | } | 
 |  | 
 | static ssize_t provides_dev_sdrs_show(struct device *dev, | 
 | 				      struct device_attribute *attr, | 
 | 				      char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 10, "%u\n", | 
 | 			bmc->id.device_revision && 0x80 >> 7); | 
 | } | 
 |  | 
 | static ssize_t revision_show(struct device *dev, struct device_attribute *attr, | 
 | 			     char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 20, "%u\n", | 
 | 			bmc->id.device_revision && 0x0F); | 
 | } | 
 |  | 
 | static ssize_t firmware_rev_show(struct device *dev, | 
 | 				 struct device_attribute *attr, | 
 | 				 char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 20, "%u.%x\n", bmc->id.firmware_revision_1, | 
 | 			bmc->id.firmware_revision_2); | 
 | } | 
 |  | 
 | static ssize_t ipmi_version_show(struct device *dev, | 
 | 				 struct device_attribute *attr, | 
 | 				 char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 20, "%u.%u\n", | 
 | 			ipmi_version_major(&bmc->id), | 
 | 			ipmi_version_minor(&bmc->id)); | 
 | } | 
 |  | 
 | static ssize_t add_dev_support_show(struct device *dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 10, "0x%02x\n", | 
 | 			bmc->id.additional_device_support); | 
 | } | 
 |  | 
 | static ssize_t manufacturer_id_show(struct device *dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 20, "0x%6.6x\n", bmc->id.manufacturer_id); | 
 | } | 
 |  | 
 | static ssize_t product_id_show(struct device *dev, | 
 | 			       struct device_attribute *attr, | 
 | 			       char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 10, "0x%4.4x\n", bmc->id.product_id); | 
 | } | 
 |  | 
 | static ssize_t aux_firmware_rev_show(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 21, "0x%02x 0x%02x 0x%02x 0x%02x\n", | 
 | 			bmc->id.aux_firmware_revision[3], | 
 | 			bmc->id.aux_firmware_revision[2], | 
 | 			bmc->id.aux_firmware_revision[1], | 
 | 			bmc->id.aux_firmware_revision[0]); | 
 | } | 
 |  | 
 | static ssize_t guid_show(struct device *dev, struct device_attribute *attr, | 
 | 			 char *buf) | 
 | { | 
 | 	struct bmc_device *bmc = dev_get_drvdata(dev); | 
 |  | 
 | 	return snprintf(buf, 100, "%Lx%Lx\n", | 
 | 			(long long) bmc->guid[0], | 
 | 			(long long) bmc->guid[8]); | 
 | } | 
 |  | 
 | static void | 
 | cleanup_bmc_device(struct kref *ref) | 
 | { | 
 | 	struct bmc_device *bmc; | 
 |  | 
 | 	bmc = container_of(ref, struct bmc_device, refcount); | 
 |  | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->device_id_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->provides_dev_sdrs_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->revision_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->firmware_rev_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->version_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->add_dev_support_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->manufacturer_id_attr); | 
 | 	device_remove_file(&bmc->dev->dev, | 
 | 			   &bmc->product_id_attr); | 
 | 	if (bmc->id.aux_firmware_revision_set) | 
 | 		device_remove_file(&bmc->dev->dev, | 
 | 				   &bmc->aux_firmware_rev_attr); | 
 | 	if (bmc->guid_set) | 
 | 		device_remove_file(&bmc->dev->dev, | 
 | 				   &bmc->guid_attr); | 
 | 	platform_device_unregister(bmc->dev); | 
 | 	kfree(bmc); | 
 | } | 
 |  | 
 | static void ipmi_bmc_unregister(ipmi_smi_t intf) | 
 | { | 
 | 	struct bmc_device *bmc = intf->bmc; | 
 |  | 
 | 	sysfs_remove_link(&intf->si_dev->kobj, "bmc"); | 
 | 	if (intf->my_dev_name) { | 
 | 		sysfs_remove_link(&bmc->dev->dev.kobj, intf->my_dev_name); | 
 | 		kfree(intf->my_dev_name); | 
 | 		intf->my_dev_name = NULL; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&ipmidriver_mutex); | 
 | 	kref_put(&bmc->refcount, cleanup_bmc_device); | 
 | 	mutex_unlock(&ipmidriver_mutex); | 
 | } | 
 |  | 
 | static int ipmi_bmc_register(ipmi_smi_t intf) | 
 | { | 
 | 	int               rv; | 
 | 	struct bmc_device *bmc = intf->bmc; | 
 | 	struct bmc_device *old_bmc; | 
 | 	int               size; | 
 | 	char              dummy[1]; | 
 |  | 
 | 	mutex_lock(&ipmidriver_mutex); | 
 |  | 
 | 	/* | 
 | 	 * Try to find if there is an bmc_device struct | 
 | 	 * representing the interfaced BMC already | 
 | 	 */ | 
 | 	if (bmc->guid_set) | 
 | 		old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); | 
 | 	else | 
 | 		old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, | 
 | 						    bmc->id.product_id, | 
 | 						    bmc->id.device_id); | 
 |  | 
 | 	/* | 
 | 	 * If there is already an bmc_device, free the new one, | 
 | 	 * otherwise register the new BMC device | 
 | 	 */ | 
 | 	if (old_bmc) { | 
 | 		kfree(bmc); | 
 | 		intf->bmc = old_bmc; | 
 | 		bmc = old_bmc; | 
 |  | 
 | 		kref_get(&bmc->refcount); | 
 | 		mutex_unlock(&ipmidriver_mutex); | 
 |  | 
 | 		printk(KERN_INFO | 
 | 		       "ipmi: interfacing existing BMC (man_id: 0x%6.6x," | 
 | 		       " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", | 
 | 		       bmc->id.manufacturer_id, | 
 | 		       bmc->id.product_id, | 
 | 		       bmc->id.device_id); | 
 | 	} else { | 
 | 		bmc->dev = platform_device_alloc("ipmi_bmc", | 
 | 						 bmc->id.device_id); | 
 | 		if (!bmc->dev) { | 
 | 			printk(KERN_ERR | 
 | 			       "ipmi_msghandler:" | 
 | 			       " Unable to allocate platform device\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 		bmc->dev->dev.driver = &ipmidriver; | 
 | 		dev_set_drvdata(&bmc->dev->dev, bmc); | 
 | 		kref_init(&bmc->refcount); | 
 |  | 
 | 		rv = platform_device_register(bmc->dev); | 
 | 		mutex_unlock(&ipmidriver_mutex); | 
 | 		if (rv) { | 
 | 			printk(KERN_ERR | 
 | 			       "ipmi_msghandler:" | 
 | 			       " Unable to register bmc device: %d\n", | 
 | 			       rv); | 
 | 			/* Don't go to out_err, you can only do that if | 
 | 			   the device is registered already. */ | 
 | 			return rv; | 
 | 		} | 
 |  | 
 | 		bmc->device_id_attr.attr.name = "device_id"; | 
 | 		bmc->device_id_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->device_id_attr.attr.mode = S_IRUGO; | 
 | 		bmc->device_id_attr.show = device_id_show; | 
 |  | 
 | 		bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs"; | 
 | 		bmc->provides_dev_sdrs_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO; | 
 | 		bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show; | 
 |  | 
 |  | 
 | 		bmc->revision_attr.attr.name = "revision"; | 
 | 		bmc->revision_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->revision_attr.attr.mode = S_IRUGO; | 
 | 		bmc->revision_attr.show = revision_show; | 
 |  | 
 | 		bmc->firmware_rev_attr.attr.name = "firmware_revision"; | 
 | 		bmc->firmware_rev_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->firmware_rev_attr.attr.mode = S_IRUGO; | 
 | 		bmc->firmware_rev_attr.show = firmware_rev_show; | 
 |  | 
 | 		bmc->version_attr.attr.name = "ipmi_version"; | 
 | 		bmc->version_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->version_attr.attr.mode = S_IRUGO; | 
 | 		bmc->version_attr.show = ipmi_version_show; | 
 |  | 
 | 		bmc->add_dev_support_attr.attr.name | 
 | 			= "additional_device_support"; | 
 | 		bmc->add_dev_support_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->add_dev_support_attr.attr.mode = S_IRUGO; | 
 | 		bmc->add_dev_support_attr.show = add_dev_support_show; | 
 |  | 
 | 		bmc->manufacturer_id_attr.attr.name = "manufacturer_id"; | 
 | 		bmc->manufacturer_id_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->manufacturer_id_attr.attr.mode = S_IRUGO; | 
 | 		bmc->manufacturer_id_attr.show = manufacturer_id_show; | 
 |  | 
 | 		bmc->product_id_attr.attr.name = "product_id"; | 
 | 		bmc->product_id_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->product_id_attr.attr.mode = S_IRUGO; | 
 | 		bmc->product_id_attr.show = product_id_show; | 
 |  | 
 | 		bmc->guid_attr.attr.name = "guid"; | 
 | 		bmc->guid_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->guid_attr.attr.mode = S_IRUGO; | 
 | 		bmc->guid_attr.show = guid_show; | 
 |  | 
 | 		bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision"; | 
 | 		bmc->aux_firmware_rev_attr.attr.owner = THIS_MODULE; | 
 | 		bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO; | 
 | 		bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show; | 
 |  | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->device_id_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->provides_dev_sdrs_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->revision_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->firmware_rev_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->version_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->add_dev_support_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->manufacturer_id_attr); | 
 | 		device_create_file(&bmc->dev->dev, | 
 | 				   &bmc->product_id_attr); | 
 | 		if (bmc->id.aux_firmware_revision_set) | 
 | 			device_create_file(&bmc->dev->dev, | 
 | 					   &bmc->aux_firmware_rev_attr); | 
 | 		if (bmc->guid_set) | 
 | 			device_create_file(&bmc->dev->dev, | 
 | 					   &bmc->guid_attr); | 
 |  | 
 | 		printk(KERN_INFO | 
 | 		       "ipmi: Found new BMC (man_id: 0x%6.6x, " | 
 | 		       " prod_id: 0x%4.4x, dev_id: 0x%2.2x)\n", | 
 | 		       bmc->id.manufacturer_id, | 
 | 		       bmc->id.product_id, | 
 | 		       bmc->id.device_id); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * create symlink from system interface device to bmc device | 
 | 	 * and back. | 
 | 	 */ | 
 | 	rv = sysfs_create_link(&intf->si_dev->kobj, | 
 | 			       &bmc->dev->dev.kobj, "bmc"); | 
 | 	if (rv) { | 
 | 		printk(KERN_ERR | 
 | 		       "ipmi_msghandler: Unable to create bmc symlink: %d\n", | 
 | 		       rv); | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | 	size = snprintf(dummy, 0, "ipmi%d", intf->intf_num); | 
 | 	intf->my_dev_name = kmalloc(size+1, GFP_KERNEL); | 
 | 	if (!intf->my_dev_name) { | 
 | 		rv = -ENOMEM; | 
 | 		printk(KERN_ERR | 
 | 		       "ipmi_msghandler: allocate link from BMC: %d\n", | 
 | 		       rv); | 
 | 		goto out_err; | 
 | 	} | 
 | 	snprintf(intf->my_dev_name, size+1, "ipmi%d", intf->intf_num); | 
 |  | 
 | 	rv = sysfs_create_link(&bmc->dev->dev.kobj, &intf->si_dev->kobj, | 
 | 			       intf->my_dev_name); | 
 | 	if (rv) { | 
 | 		kfree(intf->my_dev_name); | 
 | 		intf->my_dev_name = NULL; | 
 | 		printk(KERN_ERR | 
 | 		       "ipmi_msghandler:" | 
 | 		       " Unable to create symlink to bmc: %d\n", | 
 | 		       rv); | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_err: | 
 | 	ipmi_bmc_unregister(intf); | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int | 
 | send_guid_cmd(ipmi_smi_t intf, int chan) | 
 | { | 
 | 	struct kernel_ipmi_msg            msg; | 
 | 	struct ipmi_system_interface_addr si; | 
 |  | 
 | 	si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
 | 	si.channel = IPMI_BMC_CHANNEL; | 
 | 	si.lun = 0; | 
 |  | 
 | 	msg.netfn = IPMI_NETFN_APP_REQUEST; | 
 | 	msg.cmd = IPMI_GET_DEVICE_GUID_CMD; | 
 | 	msg.data = NULL; | 
 | 	msg.data_len = 0; | 
 | 	return i_ipmi_request(NULL, | 
 | 			      intf, | 
 | 			      (struct ipmi_addr *) &si, | 
 | 			      0, | 
 | 			      &msg, | 
 | 			      intf, | 
 | 			      NULL, | 
 | 			      NULL, | 
 | 			      0, | 
 | 			      intf->channels[0].address, | 
 | 			      intf->channels[0].lun, | 
 | 			      -1, 0); | 
 | } | 
 |  | 
 | static void | 
 | guid_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
 | { | 
 | 	if ((msg->addr.addr_type != IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
 | 	    || (msg->msg.netfn != IPMI_NETFN_APP_RESPONSE) | 
 | 	    || (msg->msg.cmd != IPMI_GET_DEVICE_GUID_CMD)) | 
 | 		/* Not for me */ | 
 | 		return; | 
 |  | 
 | 	if (msg->msg.data[0] != 0) { | 
 | 		/* Error from getting the GUID, the BMC doesn't have one. */ | 
 | 		intf->bmc->guid_set = 0; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (msg->msg.data_len < 17) { | 
 | 		intf->bmc->guid_set = 0; | 
 | 		printk(KERN_WARNING PFX | 
 | 		       "guid_handler: The GUID response from the BMC was too" | 
 | 		       " short, it was %d but should have been 17.  Assuming" | 
 | 		       " GUID is not available.\n", | 
 | 		       msg->msg.data_len); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	memcpy(intf->bmc->guid, msg->msg.data, 16); | 
 | 	intf->bmc->guid_set = 1; | 
 |  out: | 
 | 	wake_up(&intf->waitq); | 
 | } | 
 |  | 
 | static void | 
 | get_guid(ipmi_smi_t intf) | 
 | { | 
 | 	int rv; | 
 |  | 
 | 	intf->bmc->guid_set = 0x2; | 
 | 	intf->null_user_handler = guid_handler; | 
 | 	rv = send_guid_cmd(intf, 0); | 
 | 	if (rv) | 
 | 		/* Send failed, no GUID available. */ | 
 | 		intf->bmc->guid_set = 0; | 
 | 	wait_event(intf->waitq, intf->bmc->guid_set != 2); | 
 | 	intf->null_user_handler = NULL; | 
 | } | 
 |  | 
 | static int | 
 | send_channel_info_cmd(ipmi_smi_t intf, int chan) | 
 | { | 
 | 	struct kernel_ipmi_msg            msg; | 
 | 	unsigned char                     data[1]; | 
 | 	struct ipmi_system_interface_addr si; | 
 |  | 
 | 	si.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
 | 	si.channel = IPMI_BMC_CHANNEL; | 
 | 	si.lun = 0; | 
 |  | 
 | 	msg.netfn = IPMI_NETFN_APP_REQUEST; | 
 | 	msg.cmd = IPMI_GET_CHANNEL_INFO_CMD; | 
 | 	msg.data = data; | 
 | 	msg.data_len = 1; | 
 | 	data[0] = chan; | 
 | 	return i_ipmi_request(NULL, | 
 | 			      intf, | 
 | 			      (struct ipmi_addr *) &si, | 
 | 			      0, | 
 | 			      &msg, | 
 | 			      intf, | 
 | 			      NULL, | 
 | 			      NULL, | 
 | 			      0, | 
 | 			      intf->channels[0].address, | 
 | 			      intf->channels[0].lun, | 
 | 			      -1, 0); | 
 | } | 
 |  | 
 | static void | 
 | channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
 | { | 
 | 	int rv = 0; | 
 | 	int chan; | 
 |  | 
 | 	if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
 | 	    && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) | 
 | 	    && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) | 
 | 	{ | 
 | 		/* It's the one we want */ | 
 | 		if (msg->msg.data[0] != 0) { | 
 | 			/* Got an error from the channel, just go on. */ | 
 |  | 
 | 			if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) { | 
 | 				/* If the MC does not support this | 
 | 				   command, that is legal.  We just | 
 | 				   assume it has one IPMB at channel | 
 | 				   zero. */ | 
 | 				intf->channels[0].medium | 
 | 					= IPMI_CHANNEL_MEDIUM_IPMB; | 
 | 				intf->channels[0].protocol | 
 | 					= IPMI_CHANNEL_PROTOCOL_IPMB; | 
 | 				rv = -ENOSYS; | 
 |  | 
 | 				intf->curr_channel = IPMI_MAX_CHANNELS; | 
 | 				wake_up(&intf->waitq); | 
 | 				goto out; | 
 | 			} | 
 | 			goto next_channel; | 
 | 		} | 
 | 		if (msg->msg.data_len < 4) { | 
 | 			/* Message not big enough, just go on. */ | 
 | 			goto next_channel; | 
 | 		} | 
 | 		chan = intf->curr_channel; | 
 | 		intf->channels[chan].medium = msg->msg.data[2] & 0x7f; | 
 | 		intf->channels[chan].protocol = msg->msg.data[3] & 0x1f; | 
 |  | 
 | 	next_channel: | 
 | 		intf->curr_channel++; | 
 | 		if (intf->curr_channel >= IPMI_MAX_CHANNELS) | 
 | 			wake_up(&intf->waitq); | 
 | 		else | 
 | 			rv = send_channel_info_cmd(intf, intf->curr_channel); | 
 |  | 
 | 		if (rv) { | 
 | 			/* Got an error somehow, just give up. */ | 
 | 			intf->curr_channel = IPMI_MAX_CHANNELS; | 
 | 			wake_up(&intf->waitq); | 
 |  | 
 | 			printk(KERN_WARNING PFX | 
 | 			       "Error sending channel information: %d\n", | 
 | 			       rv); | 
 | 		} | 
 | 	} | 
 |  out: | 
 | 	return; | 
 | } | 
 |  | 
 | int ipmi_register_smi(struct ipmi_smi_handlers *handlers, | 
 | 		      void		       *send_info, | 
 | 		      struct ipmi_device_id    *device_id, | 
 | 		      struct device            *si_dev, | 
 | 		      unsigned char            slave_addr) | 
 | { | 
 | 	int              i, j; | 
 | 	int              rv; | 
 | 	ipmi_smi_t       intf; | 
 | 	unsigned long    flags; | 
 | 	int              version_major; | 
 | 	int              version_minor; | 
 |  | 
 | 	version_major = ipmi_version_major(device_id); | 
 | 	version_minor = ipmi_version_minor(device_id); | 
 |  | 
 | 	/* Make sure the driver is actually initialized, this handles | 
 | 	   problems with initialization order. */ | 
 | 	if (!initialized) { | 
 | 		rv = ipmi_init_msghandler(); | 
 | 		if (rv) | 
 | 			return rv; | 
 | 		/* The init code doesn't return an error if it was turned | 
 | 		   off, but it won't initialize.  Check that. */ | 
 | 		if (!initialized) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	intf = kmalloc(sizeof(*intf), GFP_KERNEL); | 
 | 	if (!intf) | 
 | 		return -ENOMEM; | 
 | 	memset(intf, 0, sizeof(*intf)); | 
 | 	intf->bmc = kzalloc(sizeof(*intf->bmc), GFP_KERNEL); | 
 | 	if (!intf->bmc) { | 
 | 		kfree(intf); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	intf->intf_num = -1; | 
 | 	kref_init(&intf->refcount); | 
 | 	intf->bmc->id = *device_id; | 
 | 	intf->si_dev = si_dev; | 
 | 	for (j = 0; j < IPMI_MAX_CHANNELS; j++) { | 
 | 		intf->channels[j].address = IPMI_BMC_SLAVE_ADDR; | 
 | 		intf->channels[j].lun = 2; | 
 | 	} | 
 | 	if (slave_addr != 0) | 
 | 		intf->channels[0].address = slave_addr; | 
 | 	INIT_LIST_HEAD(&intf->users); | 
 | 	intf->handlers = handlers; | 
 | 	intf->send_info = send_info; | 
 | 	spin_lock_init(&intf->seq_lock); | 
 | 	for (j = 0; j < IPMI_IPMB_NUM_SEQ; j++) { | 
 | 		intf->seq_table[j].inuse = 0; | 
 | 		intf->seq_table[j].seqid = 0; | 
 | 	} | 
 | 	intf->curr_seq = 0; | 
 | #ifdef CONFIG_PROC_FS | 
 | 	spin_lock_init(&intf->proc_entry_lock); | 
 | #endif | 
 | 	spin_lock_init(&intf->waiting_msgs_lock); | 
 | 	INIT_LIST_HEAD(&intf->waiting_msgs); | 
 | 	spin_lock_init(&intf->events_lock); | 
 | 	INIT_LIST_HEAD(&intf->waiting_events); | 
 | 	intf->waiting_events_count = 0; | 
 | 	mutex_init(&intf->cmd_rcvrs_mutex); | 
 | 	INIT_LIST_HEAD(&intf->cmd_rcvrs); | 
 | 	init_waitqueue_head(&intf->waitq); | 
 |  | 
 | 	spin_lock_init(&intf->counter_lock); | 
 | 	intf->proc_dir = NULL; | 
 |  | 
 | 	rv = -ENOMEM; | 
 | 	spin_lock_irqsave(&interfaces_lock, flags); | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		if (ipmi_interfaces[i] == NULL) { | 
 | 			intf->intf_num = i; | 
 | 			/* Reserve the entry till we are done. */ | 
 | 			ipmi_interfaces[i] = IPMI_INVALID_INTERFACE_ENTRY; | 
 | 			rv = 0; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&interfaces_lock, flags); | 
 | 	if (rv) | 
 | 		goto out; | 
 |  | 
 | 	rv = handlers->start_processing(send_info, intf); | 
 | 	if (rv) | 
 | 		goto out; | 
 |  | 
 | 	get_guid(intf); | 
 |  | 
 | 	if ((version_major > 1) | 
 | 	    || ((version_major == 1) && (version_minor >= 5))) | 
 | 	{ | 
 | 		/* Start scanning the channels to see what is | 
 | 		   available. */ | 
 | 		intf->null_user_handler = channel_handler; | 
 | 		intf->curr_channel = 0; | 
 | 		rv = send_channel_info_cmd(intf, 0); | 
 | 		if (rv) | 
 | 			goto out; | 
 |  | 
 | 		/* Wait for the channel info to be read. */ | 
 | 		wait_event(intf->waitq, | 
 | 			   intf->curr_channel >= IPMI_MAX_CHANNELS); | 
 | 		intf->null_user_handler = NULL; | 
 | 	} else { | 
 | 		/* Assume a single IPMB channel at zero. */ | 
 | 		intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; | 
 | 		intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; | 
 | 	} | 
 |  | 
 | 	if (rv == 0) | 
 | 		rv = add_proc_entries(intf, i); | 
 |  | 
 | 	rv = ipmi_bmc_register(intf); | 
 |  | 
 |  out: | 
 | 	if (rv) { | 
 | 		if (intf->proc_dir) | 
 | 			remove_proc_entries(intf); | 
 | 		kref_put(&intf->refcount, intf_free); | 
 | 		if (i < MAX_IPMI_INTERFACES) { | 
 | 			spin_lock_irqsave(&interfaces_lock, flags); | 
 | 			ipmi_interfaces[i] = NULL; | 
 | 			spin_unlock_irqrestore(&interfaces_lock, flags); | 
 | 		} | 
 | 	} else { | 
 | 		spin_lock_irqsave(&interfaces_lock, flags); | 
 | 		ipmi_interfaces[i] = intf; | 
 | 		spin_unlock_irqrestore(&interfaces_lock, flags); | 
 | 		call_smi_watchers(i, intf->si_dev); | 
 | 	} | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | int ipmi_unregister_smi(ipmi_smi_t intf) | 
 | { | 
 | 	int                     i; | 
 | 	struct ipmi_smi_watcher *w; | 
 | 	unsigned long           flags; | 
 |  | 
 | 	ipmi_bmc_unregister(intf); | 
 |  | 
 | 	spin_lock_irqsave(&interfaces_lock, flags); | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		if (ipmi_interfaces[i] == intf) { | 
 | 			/* Set the interface number reserved until we | 
 | 			 * are done. */ | 
 | 			ipmi_interfaces[i] = IPMI_INVALID_INTERFACE_ENTRY; | 
 | 			intf->intf_num = -1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&interfaces_lock,flags); | 
 |  | 
 | 	if (i == MAX_IPMI_INTERFACES) | 
 | 		return -ENODEV; | 
 |  | 
 | 	remove_proc_entries(intf); | 
 |  | 
 | 	/* Call all the watcher interfaces to tell them that | 
 | 	   an interface is gone. */ | 
 | 	down_read(&smi_watchers_sem); | 
 | 	list_for_each_entry(w, &smi_watchers, link) | 
 | 		w->smi_gone(i); | 
 | 	up_read(&smi_watchers_sem); | 
 |  | 
 | 	/* Allow the entry to be reused now. */ | 
 | 	spin_lock_irqsave(&interfaces_lock, flags); | 
 | 	ipmi_interfaces[i] = NULL; | 
 | 	spin_unlock_irqrestore(&interfaces_lock,flags); | 
 |  | 
 | 	kref_put(&intf->refcount, intf_free); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int handle_ipmb_get_msg_rsp(ipmi_smi_t          intf, | 
 | 				   struct ipmi_smi_msg *msg) | 
 | { | 
 | 	struct ipmi_ipmb_addr ipmb_addr; | 
 | 	struct ipmi_recv_msg  *recv_msg; | 
 | 	unsigned long         flags; | 
 |  | 
 | 	 | 
 | 	/* This is 11, not 10, because the response must contain a | 
 | 	 * completion code. */ | 
 | 	if (msg->rsp_size < 11) { | 
 | 		/* Message not big enough, just ignore it. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->invalid_ipmb_responses++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (msg->rsp[2] != 0) { | 
 | 		/* An error getting the response, just ignore it. */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; | 
 | 	ipmb_addr.slave_addr = msg->rsp[6]; | 
 | 	ipmb_addr.channel = msg->rsp[3] & 0x0f; | 
 | 	ipmb_addr.lun = msg->rsp[7] & 3; | 
 |  | 
 | 	/* It's a response from a remote entity.  Look up the sequence | 
 | 	   number and handle the response. */ | 
 | 	if (intf_find_seq(intf, | 
 | 			  msg->rsp[7] >> 2, | 
 | 			  msg->rsp[3] & 0x0f, | 
 | 			  msg->rsp[8], | 
 | 			  (msg->rsp[4] >> 2) & (~1), | 
 | 			  (struct ipmi_addr *) &(ipmb_addr), | 
 | 			  &recv_msg)) | 
 | 	{ | 
 | 		/* We were unable to find the sequence number, | 
 | 		   so just nuke the message. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->unhandled_ipmb_responses++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	memcpy(recv_msg->msg_data, | 
 | 	       &(msg->rsp[9]), | 
 | 	       msg->rsp_size - 9); | 
 | 	/* THe other fields matched, so no need to set them, except | 
 |            for netfn, which needs to be the response that was | 
 |            returned, not the request value. */ | 
 | 	recv_msg->msg.netfn = msg->rsp[4] >> 2; | 
 | 	recv_msg->msg.data = recv_msg->msg_data; | 
 | 	recv_msg->msg.data_len = msg->rsp_size - 10; | 
 | 	recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
 | 	spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 	intf->handled_ipmb_responses++; | 
 | 	spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 	deliver_response(recv_msg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int handle_ipmb_get_msg_cmd(ipmi_smi_t          intf, | 
 | 				   struct ipmi_smi_msg *msg) | 
 | { | 
 | 	struct cmd_rcvr          *rcvr; | 
 | 	int                      rv = 0; | 
 | 	unsigned char            netfn; | 
 | 	unsigned char            cmd; | 
 | 	ipmi_user_t              user = NULL; | 
 | 	struct ipmi_ipmb_addr    *ipmb_addr; | 
 | 	struct ipmi_recv_msg     *recv_msg; | 
 | 	unsigned long            flags; | 
 |  | 
 | 	if (msg->rsp_size < 10) { | 
 | 		/* Message not big enough, just ignore it. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->invalid_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (msg->rsp[2] != 0) { | 
 | 		/* An error getting the response, just ignore it. */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	netfn = msg->rsp[4] >> 2; | 
 | 	cmd = msg->rsp[8]; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	rcvr = find_cmd_rcvr(intf, netfn, cmd); | 
 | 	if (rcvr) { | 
 | 		user = rcvr->user; | 
 | 		kref_get(&user->refcount); | 
 | 	} else | 
 | 		user = NULL; | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (user == NULL) { | 
 | 		/* We didn't find a user, deliver an error response. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->unhandled_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 |  | 
 | 		msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); | 
 | 		msg->data[1] = IPMI_SEND_MSG_CMD; | 
 | 		msg->data[2] = msg->rsp[3]; | 
 | 		msg->data[3] = msg->rsp[6]; | 
 |                 msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); | 
 | 		msg->data[5] = ipmb_checksum(&(msg->data[3]), 2); | 
 | 		msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address; | 
 |                 /* rqseq/lun */ | 
 |                 msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); | 
 | 		msg->data[8] = msg->rsp[8]; /* cmd */ | 
 | 		msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE; | 
 | 		msg->data[10] = ipmb_checksum(&(msg->data[6]), 4); | 
 | 		msg->data_size = 11; | 
 |  | 
 | #ifdef DEBUG_MSGING | 
 | 	{ | 
 | 		int m; | 
 | 		printk("Invalid command:"); | 
 | 		for (m = 0; m < msg->data_size; m++) | 
 | 			printk(" %2.2x", msg->data[m]); | 
 | 		printk("\n"); | 
 | 	} | 
 | #endif | 
 | 		intf->handlers->sender(intf->send_info, msg, 0); | 
 |  | 
 | 		rv = -1; /* We used the message, so return the value that | 
 | 			    causes it to not be freed or queued. */ | 
 | 	} else { | 
 | 		/* Deliver the message to the user. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->handled_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 |  | 
 | 		recv_msg = ipmi_alloc_recv_msg(); | 
 | 		if (!recv_msg) { | 
 | 			/* We couldn't allocate memory for the | 
 |                            message, so requeue it for handling | 
 |                            later. */ | 
 | 			rv = 1; | 
 | 			kref_put(&user->refcount, free_user); | 
 | 		} else { | 
 | 			/* Extract the source address from the data. */ | 
 | 			ipmb_addr = (struct ipmi_ipmb_addr *) &recv_msg->addr; | 
 | 			ipmb_addr->addr_type = IPMI_IPMB_ADDR_TYPE; | 
 | 			ipmb_addr->slave_addr = msg->rsp[6]; | 
 | 			ipmb_addr->lun = msg->rsp[7] & 3; | 
 | 			ipmb_addr->channel = msg->rsp[3] & 0xf; | 
 |  | 
 | 			/* Extract the rest of the message information | 
 | 			   from the IPMB header.*/ | 
 | 			recv_msg->user = user; | 
 | 			recv_msg->recv_type = IPMI_CMD_RECV_TYPE; | 
 | 			recv_msg->msgid = msg->rsp[7] >> 2; | 
 | 			recv_msg->msg.netfn = msg->rsp[4] >> 2; | 
 | 			recv_msg->msg.cmd = msg->rsp[8]; | 
 | 			recv_msg->msg.data = recv_msg->msg_data; | 
 |  | 
 | 			/* We chop off 10, not 9 bytes because the checksum | 
 | 			   at the end also needs to be removed. */ | 
 | 			recv_msg->msg.data_len = msg->rsp_size - 10; | 
 | 			memcpy(recv_msg->msg_data, | 
 | 			       &(msg->rsp[9]), | 
 | 			       msg->rsp_size - 10); | 
 | 			deliver_response(recv_msg); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int handle_lan_get_msg_rsp(ipmi_smi_t          intf, | 
 | 				  struct ipmi_smi_msg *msg) | 
 | { | 
 | 	struct ipmi_lan_addr  lan_addr; | 
 | 	struct ipmi_recv_msg  *recv_msg; | 
 | 	unsigned long         flags; | 
 |  | 
 |  | 
 | 	/* This is 13, not 12, because the response must contain a | 
 | 	 * completion code. */ | 
 | 	if (msg->rsp_size < 13) { | 
 | 		/* Message not big enough, just ignore it. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->invalid_lan_responses++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (msg->rsp[2] != 0) { | 
 | 		/* An error getting the response, just ignore it. */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	lan_addr.addr_type = IPMI_LAN_ADDR_TYPE; | 
 | 	lan_addr.session_handle = msg->rsp[4]; | 
 | 	lan_addr.remote_SWID = msg->rsp[8]; | 
 | 	lan_addr.local_SWID = msg->rsp[5]; | 
 | 	lan_addr.channel = msg->rsp[3] & 0x0f; | 
 | 	lan_addr.privilege = msg->rsp[3] >> 4; | 
 | 	lan_addr.lun = msg->rsp[9] & 3; | 
 |  | 
 | 	/* It's a response from a remote entity.  Look up the sequence | 
 | 	   number and handle the response. */ | 
 | 	if (intf_find_seq(intf, | 
 | 			  msg->rsp[9] >> 2, | 
 | 			  msg->rsp[3] & 0x0f, | 
 | 			  msg->rsp[10], | 
 | 			  (msg->rsp[6] >> 2) & (~1), | 
 | 			  (struct ipmi_addr *) &(lan_addr), | 
 | 			  &recv_msg)) | 
 | 	{ | 
 | 		/* We were unable to find the sequence number, | 
 | 		   so just nuke the message. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->unhandled_lan_responses++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	memcpy(recv_msg->msg_data, | 
 | 	       &(msg->rsp[11]), | 
 | 	       msg->rsp_size - 11); | 
 | 	/* The other fields matched, so no need to set them, except | 
 |            for netfn, which needs to be the response that was | 
 |            returned, not the request value. */ | 
 | 	recv_msg->msg.netfn = msg->rsp[6] >> 2; | 
 | 	recv_msg->msg.data = recv_msg->msg_data; | 
 | 	recv_msg->msg.data_len = msg->rsp_size - 12; | 
 | 	recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
 | 	spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 	intf->handled_lan_responses++; | 
 | 	spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 	deliver_response(recv_msg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int handle_lan_get_msg_cmd(ipmi_smi_t          intf, | 
 | 				  struct ipmi_smi_msg *msg) | 
 | { | 
 | 	struct cmd_rcvr          *rcvr; | 
 | 	int                      rv = 0; | 
 | 	unsigned char            netfn; | 
 | 	unsigned char            cmd; | 
 | 	ipmi_user_t              user = NULL; | 
 | 	struct ipmi_lan_addr     *lan_addr; | 
 | 	struct ipmi_recv_msg     *recv_msg; | 
 | 	unsigned long            flags; | 
 |  | 
 | 	if (msg->rsp_size < 12) { | 
 | 		/* Message not big enough, just ignore it. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->invalid_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (msg->rsp[2] != 0) { | 
 | 		/* An error getting the response, just ignore it. */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	netfn = msg->rsp[6] >> 2; | 
 | 	cmd = msg->rsp[10]; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	rcvr = find_cmd_rcvr(intf, netfn, cmd); | 
 | 	if (rcvr) { | 
 | 		user = rcvr->user; | 
 | 		kref_get(&user->refcount); | 
 | 	} else | 
 | 		user = NULL; | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (user == NULL) { | 
 | 		/* We didn't find a user, just give up. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->unhandled_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 |  | 
 | 		rv = 0; /* Don't do anything with these messages, just | 
 | 			   allow them to be freed. */ | 
 | 	} else { | 
 | 		/* Deliver the message to the user. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->handled_commands++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 |  | 
 | 		recv_msg = ipmi_alloc_recv_msg(); | 
 | 		if (!recv_msg) { | 
 | 			/* We couldn't allocate memory for the | 
 |                            message, so requeue it for handling | 
 |                            later. */ | 
 | 			rv = 1; | 
 | 			kref_put(&user->refcount, free_user); | 
 | 		} else { | 
 | 			/* Extract the source address from the data. */ | 
 | 			lan_addr = (struct ipmi_lan_addr *) &recv_msg->addr; | 
 | 			lan_addr->addr_type = IPMI_LAN_ADDR_TYPE; | 
 | 			lan_addr->session_handle = msg->rsp[4]; | 
 | 			lan_addr->remote_SWID = msg->rsp[8]; | 
 | 			lan_addr->local_SWID = msg->rsp[5]; | 
 | 			lan_addr->lun = msg->rsp[9] & 3; | 
 | 			lan_addr->channel = msg->rsp[3] & 0xf; | 
 | 			lan_addr->privilege = msg->rsp[3] >> 4; | 
 |  | 
 | 			/* Extract the rest of the message information | 
 | 			   from the IPMB header.*/ | 
 | 			recv_msg->user = user; | 
 | 			recv_msg->recv_type = IPMI_CMD_RECV_TYPE; | 
 | 			recv_msg->msgid = msg->rsp[9] >> 2; | 
 | 			recv_msg->msg.netfn = msg->rsp[6] >> 2; | 
 | 			recv_msg->msg.cmd = msg->rsp[10]; | 
 | 			recv_msg->msg.data = recv_msg->msg_data; | 
 |  | 
 | 			/* We chop off 12, not 11 bytes because the checksum | 
 | 			   at the end also needs to be removed. */ | 
 | 			recv_msg->msg.data_len = msg->rsp_size - 12; | 
 | 			memcpy(recv_msg->msg_data, | 
 | 			       &(msg->rsp[11]), | 
 | 			       msg->rsp_size - 12); | 
 | 			deliver_response(recv_msg); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, | 
 | 				     struct ipmi_smi_msg  *msg) | 
 | { | 
 | 	struct ipmi_system_interface_addr *smi_addr; | 
 | 	 | 
 | 	recv_msg->msgid = 0; | 
 | 	smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr); | 
 | 	smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
 | 	smi_addr->channel = IPMI_BMC_CHANNEL; | 
 | 	smi_addr->lun = msg->rsp[0] & 3; | 
 | 	recv_msg->recv_type = IPMI_ASYNC_EVENT_RECV_TYPE; | 
 | 	recv_msg->msg.netfn = msg->rsp[0] >> 2; | 
 | 	recv_msg->msg.cmd = msg->rsp[1]; | 
 | 	memcpy(recv_msg->msg_data, &(msg->rsp[3]), msg->rsp_size - 3); | 
 | 	recv_msg->msg.data = recv_msg->msg_data; | 
 | 	recv_msg->msg.data_len = msg->rsp_size - 3; | 
 | } | 
 |  | 
 | static int handle_read_event_rsp(ipmi_smi_t          intf, | 
 | 				 struct ipmi_smi_msg *msg) | 
 | { | 
 | 	struct ipmi_recv_msg *recv_msg, *recv_msg2; | 
 | 	struct list_head     msgs; | 
 | 	ipmi_user_t          user; | 
 | 	int                  rv = 0; | 
 | 	int                  deliver_count = 0; | 
 | 	unsigned long        flags; | 
 |  | 
 | 	if (msg->rsp_size < 19) { | 
 | 		/* Message is too small to be an IPMB event. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->invalid_events++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (msg->rsp[2] != 0) { | 
 | 		/* An error getting the event, just ignore it. */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	INIT_LIST_HEAD(&msgs); | 
 |  | 
 | 	spin_lock_irqsave(&intf->events_lock, flags); | 
 |  | 
 | 	spin_lock(&intf->counter_lock); | 
 | 	intf->events++; | 
 | 	spin_unlock(&intf->counter_lock); | 
 |  | 
 | 	/* Allocate and fill in one message for every user that is getting | 
 | 	   events. */ | 
 | 	rcu_read_lock(); | 
 | 	list_for_each_entry_rcu(user, &intf->users, link) { | 
 | 		if (!user->gets_events) | 
 | 			continue; | 
 |  | 
 | 		recv_msg = ipmi_alloc_recv_msg(); | 
 | 		if (!recv_msg) { | 
 | 			rcu_read_unlock(); | 
 | 			list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, | 
 | 						 link) { | 
 | 				list_del(&recv_msg->link); | 
 | 				ipmi_free_recv_msg(recv_msg); | 
 | 			} | 
 | 			/* We couldn't allocate memory for the | 
 |                            message, so requeue it for handling | 
 |                            later. */ | 
 | 			rv = 1; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		deliver_count++; | 
 |  | 
 | 		copy_event_into_recv_msg(recv_msg, msg); | 
 | 		recv_msg->user = user; | 
 | 		kref_get(&user->refcount); | 
 | 		list_add_tail(&(recv_msg->link), &msgs); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (deliver_count) { | 
 | 		/* Now deliver all the messages. */ | 
 | 		list_for_each_entry_safe(recv_msg, recv_msg2, &msgs, link) { | 
 | 			list_del(&recv_msg->link); | 
 | 			deliver_response(recv_msg); | 
 | 		} | 
 | 	} else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) { | 
 | 		/* No one to receive the message, put it in queue if there's | 
 | 		   not already too many things in the queue. */ | 
 | 		recv_msg = ipmi_alloc_recv_msg(); | 
 | 		if (!recv_msg) { | 
 | 			/* We couldn't allocate memory for the | 
 |                            message, so requeue it for handling | 
 |                            later. */ | 
 | 			rv = 1; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		copy_event_into_recv_msg(recv_msg, msg); | 
 | 		list_add_tail(&(recv_msg->link), &(intf->waiting_events)); | 
 | 	} else { | 
 | 		/* There's too many things in the queue, discard this | 
 | 		   message. */ | 
 | 		printk(KERN_WARNING PFX "Event queue full, discarding an" | 
 | 		       " incoming event\n"); | 
 | 	} | 
 |  | 
 |  out: | 
 | 	spin_unlock_irqrestore(&(intf->events_lock), flags); | 
 |  | 
 | 	return rv; | 
 | } | 
 |  | 
 | static int handle_bmc_rsp(ipmi_smi_t          intf, | 
 | 			  struct ipmi_smi_msg *msg) | 
 | { | 
 | 	struct ipmi_recv_msg *recv_msg; | 
 | 	unsigned long        flags; | 
 | 	struct ipmi_user     *user; | 
 |  | 
 | 	recv_msg = (struct ipmi_recv_msg *) msg->user_data; | 
 | 	if (recv_msg == NULL) | 
 | 	{ | 
 | 		printk(KERN_WARNING"IPMI message received with no owner. This\n" | 
 | 			"could be because of a malformed message, or\n" | 
 | 			"because of a hardware error.  Contact your\n" | 
 | 			"hardware vender for assistance\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	user = recv_msg->user; | 
 | 	/* Make sure the user still exists. */ | 
 | 	if (user && !user->valid) { | 
 | 		/* The user for the message went away, so give up. */ | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->unhandled_local_responses++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		ipmi_free_recv_msg(recv_msg); | 
 | 	} else { | 
 | 		struct ipmi_system_interface_addr *smi_addr; | 
 |  | 
 | 		spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 		intf->handled_local_responses++; | 
 | 		spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 		recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
 | 		recv_msg->msgid = msg->msgid; | 
 | 		smi_addr = ((struct ipmi_system_interface_addr *) | 
 | 			    &(recv_msg->addr)); | 
 | 		smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
 | 		smi_addr->channel = IPMI_BMC_CHANNEL; | 
 | 		smi_addr->lun = msg->rsp[0] & 3; | 
 | 		recv_msg->msg.netfn = msg->rsp[0] >> 2; | 
 | 		recv_msg->msg.cmd = msg->rsp[1]; | 
 | 		memcpy(recv_msg->msg_data, | 
 | 		       &(msg->rsp[2]), | 
 | 		       msg->rsp_size - 2); | 
 | 		recv_msg->msg.data = recv_msg->msg_data; | 
 | 		recv_msg->msg.data_len = msg->rsp_size - 2; | 
 | 		deliver_response(recv_msg); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Handle a new message.  Return 1 if the message should be requeued, | 
 |    0 if the message should be freed, or -1 if the message should not | 
 |    be freed or requeued. */ | 
 | static int handle_new_recv_msg(ipmi_smi_t          intf, | 
 | 			       struct ipmi_smi_msg *msg) | 
 | { | 
 | 	int requeue; | 
 | 	int chan; | 
 |  | 
 | #ifdef DEBUG_MSGING | 
 | 	int m; | 
 | 	printk("Recv:"); | 
 | 	for (m = 0; m < msg->rsp_size; m++) | 
 | 		printk(" %2.2x", msg->rsp[m]); | 
 | 	printk("\n"); | 
 | #endif | 
 | 	if (msg->rsp_size < 2) { | 
 | 		/* Message is too small to be correct. */ | 
 | 		printk(KERN_WARNING PFX "BMC returned to small a message" | 
 | 		       " for netfn %x cmd %x, got %d bytes\n", | 
 | 		       (msg->data[0] >> 2) | 1, msg->data[1], msg->rsp_size); | 
 |  | 
 | 		/* Generate an error response for the message. */ | 
 | 		msg->rsp[0] = msg->data[0] | (1 << 2); | 
 | 		msg->rsp[1] = msg->data[1]; | 
 | 		msg->rsp[2] = IPMI_ERR_UNSPECIFIED; | 
 | 		msg->rsp_size = 3; | 
 | 	} else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */ | 
 | 		   || (msg->rsp[1] != msg->data[1]))		  /* Command */ | 
 | 	{ | 
 | 		/* The response is not even marginally correct. */ | 
 | 		printk(KERN_WARNING PFX "BMC returned incorrect response," | 
 | 		       " expected netfn %x cmd %x, got netfn %x cmd %x\n", | 
 | 		       (msg->data[0] >> 2) | 1, msg->data[1], | 
 | 		       msg->rsp[0] >> 2, msg->rsp[1]); | 
 |  | 
 | 		/* Generate an error response for the message. */ | 
 | 		msg->rsp[0] = msg->data[0] | (1 << 2); | 
 | 		msg->rsp[1] = msg->data[1]; | 
 | 		msg->rsp[2] = IPMI_ERR_UNSPECIFIED; | 
 | 		msg->rsp_size = 3; | 
 | 	} | 
 |  | 
 | 	if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) | 
 | 	    && (msg->rsp[1] == IPMI_SEND_MSG_CMD) | 
 | 	    && (msg->user_data != NULL)) | 
 | 	{ | 
 | 		/* It's a response to a response we sent.  For this we | 
 | 		   deliver a send message response to the user. */ | 
 | 		struct ipmi_recv_msg     *recv_msg = msg->user_data; | 
 |  | 
 | 		requeue = 0; | 
 | 		if (msg->rsp_size < 2) | 
 | 			/* Message is too small to be correct. */ | 
 | 			goto out; | 
 |  | 
 | 		chan = msg->data[2] & 0x0f; | 
 | 		if (chan >= IPMI_MAX_CHANNELS) | 
 | 			/* Invalid channel number */ | 
 | 			goto out; | 
 |  | 
 | 		if (!recv_msg) | 
 | 			goto out; | 
 |  | 
 | 		/* Make sure the user still exists. */ | 
 | 		if (!recv_msg->user || !recv_msg->user->valid) | 
 | 			goto out; | 
 |  | 
 | 		recv_msg->recv_type = IPMI_RESPONSE_RESPONSE_TYPE; | 
 | 		recv_msg->msg.data = recv_msg->msg_data; | 
 | 		recv_msg->msg.data_len = 1; | 
 | 		recv_msg->msg_data[0] = msg->rsp[2]; | 
 | 		deliver_response(recv_msg); | 
 | 	} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) | 
 | 		   && (msg->rsp[1] == IPMI_GET_MSG_CMD)) | 
 | 	{ | 
 | 		/* It's from the receive queue. */ | 
 | 		chan = msg->rsp[3] & 0xf; | 
 | 		if (chan >= IPMI_MAX_CHANNELS) { | 
 | 			/* Invalid channel number */ | 
 | 			requeue = 0; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		switch (intf->channels[chan].medium) { | 
 | 		case IPMI_CHANNEL_MEDIUM_IPMB: | 
 | 			if (msg->rsp[4] & 0x04) { | 
 | 				/* It's a response, so find the | 
 | 				   requesting message and send it up. */ | 
 | 				requeue = handle_ipmb_get_msg_rsp(intf, msg); | 
 | 			} else { | 
 | 				/* It's a command to the SMS from some other | 
 | 				   entity.  Handle that. */ | 
 | 				requeue = handle_ipmb_get_msg_cmd(intf, msg); | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case IPMI_CHANNEL_MEDIUM_8023LAN: | 
 | 		case IPMI_CHANNEL_MEDIUM_ASYNC: | 
 | 			if (msg->rsp[6] & 0x04) { | 
 | 				/* It's a response, so find the | 
 | 				   requesting message and send it up. */ | 
 | 				requeue = handle_lan_get_msg_rsp(intf, msg); | 
 | 			} else { | 
 | 				/* It's a command to the SMS from some other | 
 | 				   entity.  Handle that. */ | 
 | 				requeue = handle_lan_get_msg_cmd(intf, msg); | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			/* We don't handle the channel type, so just | 
 | 			 * free the message. */ | 
 | 			requeue = 0; | 
 | 		} | 
 |  | 
 | 	} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) | 
 | 		   && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) | 
 | 	{ | 
 | 		/* It's an asyncronous event. */ | 
 | 		requeue = handle_read_event_rsp(intf, msg); | 
 | 	} else { | 
 | 		/* It's a response from the local BMC. */ | 
 | 		requeue = handle_bmc_rsp(intf, msg); | 
 | 	} | 
 |  | 
 |  out: | 
 | 	return requeue; | 
 | } | 
 |  | 
 | /* Handle a new message from the lower layer. */ | 
 | void ipmi_smi_msg_received(ipmi_smi_t          intf, | 
 | 			   struct ipmi_smi_msg *msg) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int           rv; | 
 |  | 
 |  | 
 | 	if ((msg->data_size >= 2) | 
 | 	    && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2)) | 
 | 	    && (msg->data[1] == IPMI_SEND_MSG_CMD) | 
 | 	    && (msg->user_data == NULL)) | 
 | 	{ | 
 | 		/* This is the local response to a command send, start | 
 |                    the timer for these.  The user_data will not be | 
 |                    NULL if this is a response send, and we will let | 
 |                    response sends just go through. */ | 
 |  | 
 | 		/* Check for errors, if we get certain errors (ones | 
 |                    that mean basically we can try again later), we | 
 |                    ignore them and start the timer.  Otherwise we | 
 |                    report the error immediately. */ | 
 | 		if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) | 
 | 		    && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) | 
 | 		    && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)) | 
 | 		{ | 
 | 			int chan = msg->rsp[3] & 0xf; | 
 |  | 
 | 			/* Got an error sending the message, handle it. */ | 
 | 			spin_lock_irqsave(&intf->counter_lock, flags); | 
 | 			if (chan >= IPMI_MAX_CHANNELS) | 
 | 				; /* This shouldn't happen */ | 
 | 			else if ((intf->channels[chan].medium | 
 | 				  == IPMI_CHANNEL_MEDIUM_8023LAN) | 
 | 				 || (intf->channels[chan].medium | 
 | 				     == IPMI_CHANNEL_MEDIUM_ASYNC)) | 
 | 				intf->sent_lan_command_errs++; | 
 | 			else | 
 | 				intf->sent_ipmb_command_errs++; | 
 | 			spin_unlock_irqrestore(&intf->counter_lock, flags); | 
 | 			intf_err_seq(intf, msg->msgid, msg->rsp[2]); | 
 | 		} else { | 
 | 			/* The message was sent, start the timer. */ | 
 | 			intf_start_seq_timer(intf, msg->msgid); | 
 | 		} | 
 |  | 
 | 		ipmi_free_smi_msg(msg); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* To preserve message order, if the list is not empty, we | 
 |            tack this message onto the end of the list. */ | 
 | 	spin_lock_irqsave(&intf->waiting_msgs_lock, flags); | 
 | 	if (!list_empty(&intf->waiting_msgs)) { | 
 | 		list_add_tail(&msg->link, &intf->waiting_msgs); | 
 | 		spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
 | 		goto out; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
 | 		 | 
 | 	rv = handle_new_recv_msg(intf, msg); | 
 | 	if (rv > 0) { | 
 | 		/* Could not handle the message now, just add it to a | 
 |                    list to handle later. */ | 
 | 		spin_lock_irqsave(&intf->waiting_msgs_lock, flags); | 
 | 		list_add_tail(&msg->link, &intf->waiting_msgs); | 
 | 		spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
 | 	} else if (rv == 0) { | 
 | 		ipmi_free_smi_msg(msg); | 
 | 	} | 
 |  | 
 |  out: | 
 | 	return; | 
 | } | 
 |  | 
 | void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) | 
 | { | 
 | 	ipmi_user_t user; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	list_for_each_entry_rcu(user, &intf->users, link) { | 
 | 		if (!user->handler->ipmi_watchdog_pretimeout) | 
 | 			continue; | 
 |  | 
 | 		user->handler->ipmi_watchdog_pretimeout(user->handler_data); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | } | 
 |  | 
 | static void | 
 | handle_msg_timeout(struct ipmi_recv_msg *msg) | 
 | { | 
 | 	msg->recv_type = IPMI_RESPONSE_RECV_TYPE; | 
 | 	msg->msg_data[0] = IPMI_TIMEOUT_COMPLETION_CODE; | 
 | 	msg->msg.netfn |= 1; /* Convert to a response. */ | 
 | 	msg->msg.data_len = 1; | 
 | 	msg->msg.data = msg->msg_data; | 
 | 	deliver_response(msg); | 
 | } | 
 |  | 
 | static struct ipmi_smi_msg * | 
 | smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, | 
 | 		  unsigned char seq, long seqid) | 
 | { | 
 | 	struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg(); | 
 | 	if (!smi_msg) | 
 | 		/* If we can't allocate the message, then just return, we | 
 | 		   get 4 retries, so this should be ok. */ | 
 | 		return NULL; | 
 |  | 
 | 	memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len); | 
 | 	smi_msg->data_size = recv_msg->msg.data_len; | 
 | 	smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid); | 
 | 		 | 
 | #ifdef DEBUG_MSGING | 
 | 	{ | 
 | 		int m; | 
 | 		printk("Resend: "); | 
 | 		for (m = 0; m < smi_msg->data_size; m++) | 
 | 			printk(" %2.2x", smi_msg->data[m]); | 
 | 		printk("\n"); | 
 | 	} | 
 | #endif | 
 | 	return smi_msg; | 
 | } | 
 |  | 
 | static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, | 
 | 			      struct list_head *timeouts, long timeout_period, | 
 | 			      int slot, unsigned long *flags) | 
 | { | 
 | 	struct ipmi_recv_msg *msg; | 
 |  | 
 | 	if (!ent->inuse) | 
 | 		return; | 
 |  | 
 | 	ent->timeout -= timeout_period; | 
 | 	if (ent->timeout > 0) | 
 | 		return; | 
 |  | 
 | 	if (ent->retries_left == 0) { | 
 | 		/* The message has used all its retries. */ | 
 | 		ent->inuse = 0; | 
 | 		msg = ent->recv_msg; | 
 | 		list_add_tail(&msg->link, timeouts); | 
 | 		spin_lock(&intf->counter_lock); | 
 | 		if (ent->broadcast) | 
 | 			intf->timed_out_ipmb_broadcasts++; | 
 | 		else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) | 
 | 			intf->timed_out_lan_commands++; | 
 | 		else | 
 | 			intf->timed_out_ipmb_commands++; | 
 | 		spin_unlock(&intf->counter_lock); | 
 | 	} else { | 
 | 		struct ipmi_smi_msg *smi_msg; | 
 | 		/* More retries, send again. */ | 
 |  | 
 | 		/* Start with the max timer, set to normal | 
 | 		   timer after the message is sent. */ | 
 | 		ent->timeout = MAX_MSG_TIMEOUT; | 
 | 		ent->retries_left--; | 
 | 		spin_lock(&intf->counter_lock); | 
 | 		if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) | 
 | 			intf->retransmitted_lan_commands++; | 
 | 		else | 
 | 			intf->retransmitted_ipmb_commands++; | 
 | 		spin_unlock(&intf->counter_lock); | 
 |  | 
 | 		smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot, | 
 | 					    ent->seqid); | 
 | 		if (!smi_msg) | 
 | 			return; | 
 |  | 
 | 		spin_unlock_irqrestore(&intf->seq_lock, *flags); | 
 | 		/* Send the new message.  We send with a zero | 
 | 		 * priority.  It timed out, I doubt time is | 
 | 		 * that critical now, and high priority | 
 | 		 * messages are really only for messages to the | 
 | 		 * local MC, which don't get resent. */ | 
 | 		intf->handlers->sender(intf->send_info, | 
 | 				       smi_msg, 0); | 
 | 		spin_lock_irqsave(&intf->seq_lock, *flags); | 
 | 	} | 
 | } | 
 |  | 
 | static void ipmi_timeout_handler(long timeout_period) | 
 | { | 
 | 	ipmi_smi_t           intf; | 
 | 	struct list_head     timeouts; | 
 | 	struct ipmi_recv_msg *msg, *msg2; | 
 | 	struct ipmi_smi_msg  *smi_msg, *smi_msg2; | 
 | 	unsigned long        flags; | 
 | 	int                  i, j; | 
 |  | 
 | 	INIT_LIST_HEAD(&timeouts); | 
 |  | 
 | 	spin_lock(&interfaces_lock); | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		intf = ipmi_interfaces[i]; | 
 | 		if (IPMI_INVALID_INTERFACE(intf)) | 
 | 			continue; | 
 | 		kref_get(&intf->refcount); | 
 | 		spin_unlock(&interfaces_lock); | 
 |  | 
 | 		/* See if any waiting messages need to be processed. */ | 
 | 		spin_lock_irqsave(&intf->waiting_msgs_lock, flags); | 
 | 		list_for_each_entry_safe(smi_msg, smi_msg2, | 
 | 					 &intf->waiting_msgs, link) { | 
 | 			if (!handle_new_recv_msg(intf, smi_msg)) { | 
 | 				list_del(&smi_msg->link); | 
 | 				ipmi_free_smi_msg(smi_msg); | 
 | 			} else { | 
 | 				/* To preserve message order, quit if we | 
 | 				   can't handle a message. */ | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); | 
 |  | 
 | 		/* Go through the seq table and find any messages that | 
 | 		   have timed out, putting them in the timeouts | 
 | 		   list. */ | 
 | 		spin_lock_irqsave(&intf->seq_lock, flags); | 
 | 		for (j = 0; j < IPMI_IPMB_NUM_SEQ; j++) | 
 | 			check_msg_timeout(intf, &(intf->seq_table[j]), | 
 | 					  &timeouts, timeout_period, j, | 
 | 					  &flags); | 
 | 		spin_unlock_irqrestore(&intf->seq_lock, flags); | 
 |  | 
 | 		list_for_each_entry_safe(msg, msg2, &timeouts, link) | 
 | 			handle_msg_timeout(msg); | 
 |  | 
 | 		kref_put(&intf->refcount, intf_free); | 
 | 		spin_lock(&interfaces_lock); | 
 | 	} | 
 | 	spin_unlock(&interfaces_lock); | 
 | } | 
 |  | 
 | static void ipmi_request_event(void) | 
 | { | 
 | 	ipmi_smi_t intf; | 
 | 	int        i; | 
 |  | 
 | 	spin_lock(&interfaces_lock); | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		intf = ipmi_interfaces[i]; | 
 | 		if (IPMI_INVALID_INTERFACE(intf)) | 
 | 			continue; | 
 |  | 
 | 		intf->handlers->request_events(intf->send_info); | 
 | 	} | 
 | 	spin_unlock(&interfaces_lock); | 
 | } | 
 |  | 
 | static struct timer_list ipmi_timer; | 
 |  | 
 | /* Call every ~100 ms. */ | 
 | #define IPMI_TIMEOUT_TIME	100 | 
 |  | 
 | /* How many jiffies does it take to get to the timeout time. */ | 
 | #define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000) | 
 |  | 
 | /* Request events from the queue every second (this is the number of | 
 |    IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the | 
 |    future, IPMI will add a way to know immediately if an event is in | 
 |    the queue and this silliness can go away. */ | 
 | #define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME)) | 
 |  | 
 | static atomic_t stop_operation; | 
 | static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME; | 
 |  | 
 | static void ipmi_timeout(unsigned long data) | 
 | { | 
 | 	if (atomic_read(&stop_operation)) | 
 | 		return; | 
 |  | 
 | 	ticks_to_req_ev--; | 
 | 	if (ticks_to_req_ev == 0) { | 
 | 		ipmi_request_event(); | 
 | 		ticks_to_req_ev = IPMI_REQUEST_EV_TIME; | 
 | 	} | 
 |  | 
 | 	ipmi_timeout_handler(IPMI_TIMEOUT_TIME); | 
 |  | 
 | 	mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); | 
 | } | 
 |  | 
 |  | 
 | static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); | 
 | static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); | 
 |  | 
 | /* FIXME - convert these to slabs. */ | 
 | static void free_smi_msg(struct ipmi_smi_msg *msg) | 
 | { | 
 | 	atomic_dec(&smi_msg_inuse_count); | 
 | 	kfree(msg); | 
 | } | 
 |  | 
 | struct ipmi_smi_msg *ipmi_alloc_smi_msg(void) | 
 | { | 
 | 	struct ipmi_smi_msg *rv; | 
 | 	rv = kmalloc(sizeof(struct ipmi_smi_msg), GFP_ATOMIC); | 
 | 	if (rv) { | 
 | 		rv->done = free_smi_msg; | 
 | 		rv->user_data = NULL; | 
 | 		atomic_inc(&smi_msg_inuse_count); | 
 | 	} | 
 | 	return rv; | 
 | } | 
 |  | 
 | static void free_recv_msg(struct ipmi_recv_msg *msg) | 
 | { | 
 | 	atomic_dec(&recv_msg_inuse_count); | 
 | 	kfree(msg); | 
 | } | 
 |  | 
 | struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) | 
 | { | 
 | 	struct ipmi_recv_msg *rv; | 
 |  | 
 | 	rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC); | 
 | 	if (rv) { | 
 | 		rv->done = free_recv_msg; | 
 | 		atomic_inc(&recv_msg_inuse_count); | 
 | 	} | 
 | 	return rv; | 
 | } | 
 |  | 
 | void ipmi_free_recv_msg(struct ipmi_recv_msg *msg) | 
 | { | 
 | 	if (msg->user) | 
 | 		kref_put(&msg->user->refcount, free_user); | 
 | 	msg->done(msg); | 
 | } | 
 |  | 
 | #ifdef CONFIG_IPMI_PANIC_EVENT | 
 |  | 
 | static void dummy_smi_done_handler(struct ipmi_smi_msg *msg) | 
 | { | 
 | } | 
 |  | 
 | static void dummy_recv_done_handler(struct ipmi_recv_msg *msg) | 
 | { | 
 | } | 
 |  | 
 | #ifdef CONFIG_IPMI_PANIC_STRING | 
 | static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
 | { | 
 | 	if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
 | 	    && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE) | 
 | 	    && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD) | 
 | 	    && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) | 
 | 	{ | 
 | 		/* A get event receiver command, save it. */ | 
 | 		intf->event_receiver = msg->msg.data[1]; | 
 | 		intf->event_receiver_lun = msg->msg.data[2] & 0x3; | 
 | 	} | 
 | } | 
 |  | 
 | static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) | 
 | { | 
 | 	if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) | 
 | 	    && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) | 
 | 	    && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD) | 
 | 	    && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) | 
 | 	{ | 
 | 		/* A get device id command, save if we are an event | 
 | 		   receiver or generator. */ | 
 | 		intf->local_sel_device = (msg->msg.data[6] >> 2) & 1; | 
 | 		intf->local_event_generator = (msg->msg.data[6] >> 5) & 1; | 
 | 	} | 
 | } | 
 | #endif | 
 |  | 
 | static void send_panic_events(char *str) | 
 | { | 
 | 	struct kernel_ipmi_msg            msg; | 
 | 	ipmi_smi_t                        intf; | 
 | 	unsigned char                     data[16]; | 
 | 	int                               i; | 
 | 	struct ipmi_system_interface_addr *si; | 
 | 	struct ipmi_addr                  addr; | 
 | 	struct ipmi_smi_msg               smi_msg; | 
 | 	struct ipmi_recv_msg              recv_msg; | 
 |  | 
 | 	si = (struct ipmi_system_interface_addr *) &addr; | 
 | 	si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
 | 	si->channel = IPMI_BMC_CHANNEL; | 
 | 	si->lun = 0; | 
 |  | 
 | 	/* Fill in an event telling that we have failed. */ | 
 | 	msg.netfn = 0x04; /* Sensor or Event. */ | 
 | 	msg.cmd = 2; /* Platform event command. */ | 
 | 	msg.data = data; | 
 | 	msg.data_len = 8; | 
 | 	data[0] = 0x41; /* Kernel generator ID, IPMI table 5-4 */ | 
 | 	data[1] = 0x03; /* This is for IPMI 1.0. */ | 
 | 	data[2] = 0x20; /* OS Critical Stop, IPMI table 36-3 */ | 
 | 	data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ | 
 | 	data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ | 
 |  | 
 | 	/* Put a few breadcrumbs in.  Hopefully later we can add more things | 
 | 	   to make the panic events more useful. */ | 
 | 	if (str) { | 
 | 		data[3] = str[0]; | 
 | 		data[6] = str[1]; | 
 | 		data[7] = str[2]; | 
 | 	} | 
 |  | 
 | 	smi_msg.done = dummy_smi_done_handler; | 
 | 	recv_msg.done = dummy_recv_done_handler; | 
 |  | 
 | 	/* For every registered interface, send the event. */ | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		intf = ipmi_interfaces[i]; | 
 | 		if (IPMI_INVALID_INTERFACE(intf)) | 
 | 			continue; | 
 |  | 
 | 		/* Send the event announcing the panic. */ | 
 | 		intf->handlers->set_run_to_completion(intf->send_info, 1); | 
 | 		i_ipmi_request(NULL, | 
 | 			       intf, | 
 | 			       &addr, | 
 | 			       0, | 
 | 			       &msg, | 
 | 			       intf, | 
 | 			       &smi_msg, | 
 | 			       &recv_msg, | 
 | 			       0, | 
 | 			       intf->channels[0].address, | 
 | 			       intf->channels[0].lun, | 
 | 			       0, 1); /* Don't retry, and don't wait. */ | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_IPMI_PANIC_STRING | 
 | 	/* On every interface, dump a bunch of OEM event holding the | 
 | 	   string. */ | 
 | 	if (!str)  | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		char                  *p = str; | 
 | 		struct ipmi_ipmb_addr *ipmb; | 
 | 		int                   j; | 
 |  | 
 | 		intf = ipmi_interfaces[i]; | 
 | 		if (IPMI_INVALID_INTERFACE(intf)) | 
 | 			continue; | 
 |  | 
 | 		/* First job here is to figure out where to send the | 
 | 		   OEM events.  There's no way in IPMI to send OEM | 
 | 		   events using an event send command, so we have to | 
 | 		   find the SEL to put them in and stick them in | 
 | 		   there. */ | 
 |  | 
 | 		/* Get capabilities from the get device id. */ | 
 | 		intf->local_sel_device = 0; | 
 | 		intf->local_event_generator = 0; | 
 | 		intf->event_receiver = 0; | 
 |  | 
 | 		/* Request the device info from the local MC. */ | 
 | 		msg.netfn = IPMI_NETFN_APP_REQUEST; | 
 | 		msg.cmd = IPMI_GET_DEVICE_ID_CMD; | 
 | 		msg.data = NULL; | 
 | 		msg.data_len = 0; | 
 | 		intf->null_user_handler = device_id_fetcher; | 
 | 		i_ipmi_request(NULL, | 
 | 			       intf, | 
 | 			       &addr, | 
 | 			       0, | 
 | 			       &msg, | 
 | 			       intf, | 
 | 			       &smi_msg, | 
 | 			       &recv_msg, | 
 | 			       0, | 
 | 			       intf->channels[0].address, | 
 | 			       intf->channels[0].lun, | 
 | 			       0, 1); /* Don't retry, and don't wait. */ | 
 |  | 
 | 		if (intf->local_event_generator) { | 
 | 			/* Request the event receiver from the local MC. */ | 
 | 			msg.netfn = IPMI_NETFN_SENSOR_EVENT_REQUEST; | 
 | 			msg.cmd = IPMI_GET_EVENT_RECEIVER_CMD; | 
 | 			msg.data = NULL; | 
 | 			msg.data_len = 0; | 
 | 			intf->null_user_handler = event_receiver_fetcher; | 
 | 			i_ipmi_request(NULL, | 
 | 				       intf, | 
 | 				       &addr, | 
 | 				       0, | 
 | 				       &msg, | 
 | 				       intf, | 
 | 				       &smi_msg, | 
 | 				       &recv_msg, | 
 | 				       0, | 
 | 				       intf->channels[0].address, | 
 | 				       intf->channels[0].lun, | 
 | 				       0, 1); /* no retry, and no wait. */ | 
 | 		} | 
 | 		intf->null_user_handler = NULL; | 
 |  | 
 | 		/* Validate the event receiver.  The low bit must not | 
 | 		   be 1 (it must be a valid IPMB address), it cannot | 
 | 		   be zero, and it must not be my address. */ | 
 |                 if (((intf->event_receiver & 1) == 0) | 
 | 		    && (intf->event_receiver != 0) | 
 | 		    && (intf->event_receiver != intf->channels[0].address)) | 
 | 		{ | 
 | 			/* The event receiver is valid, send an IPMB | 
 | 			   message. */ | 
 | 			ipmb = (struct ipmi_ipmb_addr *) &addr; | 
 | 			ipmb->addr_type = IPMI_IPMB_ADDR_TYPE; | 
 | 			ipmb->channel = 0; /* FIXME - is this right? */ | 
 | 			ipmb->lun = intf->event_receiver_lun; | 
 | 			ipmb->slave_addr = intf->event_receiver; | 
 | 		} else if (intf->local_sel_device) { | 
 | 			/* The event receiver was not valid (or was | 
 | 			   me), but I am an SEL device, just dump it | 
 | 			   in my SEL. */ | 
 | 			si = (struct ipmi_system_interface_addr *) &addr; | 
 | 			si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; | 
 | 			si->channel = IPMI_BMC_CHANNEL; | 
 | 			si->lun = 0; | 
 | 		} else | 
 | 			continue; /* No where to send the event. */ | 
 |  | 
 | 		 | 
 | 		msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */ | 
 | 		msg.cmd = IPMI_ADD_SEL_ENTRY_CMD; | 
 | 		msg.data = data; | 
 | 		msg.data_len = 16; | 
 |  | 
 | 		j = 0; | 
 | 		while (*p) { | 
 | 			int size = strlen(p); | 
 |  | 
 | 			if (size > 11) | 
 | 				size = 11; | 
 | 			data[0] = 0; | 
 | 			data[1] = 0; | 
 | 			data[2] = 0xf0; /* OEM event without timestamp. */ | 
 | 			data[3] = intf->channels[0].address; | 
 | 			data[4] = j++; /* sequence # */ | 
 | 			/* Always give 11 bytes, so strncpy will fill | 
 | 			   it with zeroes for me. */ | 
 | 			strncpy(data+5, p, 11); | 
 | 			p += size; | 
 |  | 
 | 			i_ipmi_request(NULL, | 
 | 				       intf, | 
 | 				       &addr, | 
 | 				       0, | 
 | 				       &msg, | 
 | 				       intf, | 
 | 				       &smi_msg, | 
 | 				       &recv_msg, | 
 | 				       0, | 
 | 				       intf->channels[0].address, | 
 | 				       intf->channels[0].lun, | 
 | 				       0, 1); /* no retry, and no wait. */ | 
 | 		} | 
 | 	}	 | 
 | #endif /* CONFIG_IPMI_PANIC_STRING */ | 
 | } | 
 | #endif /* CONFIG_IPMI_PANIC_EVENT */ | 
 |  | 
 | static int has_paniced = 0; | 
 |  | 
 | static int panic_event(struct notifier_block *this, | 
 | 		       unsigned long         event, | 
 |                        void                  *ptr) | 
 | { | 
 | 	int        i; | 
 | 	ipmi_smi_t intf; | 
 |  | 
 | 	if (has_paniced) | 
 | 		return NOTIFY_DONE; | 
 | 	has_paniced = 1; | 
 |  | 
 | 	/* For every registered interface, set it to run to completion. */ | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) { | 
 | 		intf = ipmi_interfaces[i]; | 
 | 		if (IPMI_INVALID_INTERFACE(intf)) | 
 | 			continue; | 
 |  | 
 | 		intf->handlers->set_run_to_completion(intf->send_info, 1); | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_IPMI_PANIC_EVENT | 
 | 	send_panic_events(ptr); | 
 | #endif | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | static struct notifier_block panic_block = { | 
 | 	.notifier_call	= panic_event, | 
 | 	.next		= NULL, | 
 | 	.priority	= 200	/* priority: INT_MAX >= x >= 0 */ | 
 | }; | 
 |  | 
 | static int ipmi_init_msghandler(void) | 
 | { | 
 | 	int i; | 
 | 	int rv; | 
 |  | 
 | 	if (initialized) | 
 | 		return 0; | 
 |  | 
 | 	rv = driver_register(&ipmidriver); | 
 | 	if (rv) { | 
 | 		printk(KERN_ERR PFX "Could not register IPMI driver\n"); | 
 | 		return rv; | 
 | 	} | 
 |  | 
 | 	printk(KERN_INFO "ipmi message handler version " | 
 | 	       IPMI_DRIVER_VERSION "\n"); | 
 |  | 
 | 	for (i = 0; i < MAX_IPMI_INTERFACES; i++) | 
 | 		ipmi_interfaces[i] = NULL; | 
 |  | 
 | #ifdef CONFIG_PROC_FS | 
 | 	proc_ipmi_root = proc_mkdir("ipmi", NULL); | 
 | 	if (!proc_ipmi_root) { | 
 | 	    printk(KERN_ERR PFX "Unable to create IPMI proc dir"); | 
 | 	    return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	proc_ipmi_root->owner = THIS_MODULE; | 
 | #endif /* CONFIG_PROC_FS */ | 
 |  | 
 | 	init_timer(&ipmi_timer); | 
 | 	ipmi_timer.data = 0; | 
 | 	ipmi_timer.function = ipmi_timeout; | 
 | 	ipmi_timer.expires = jiffies + IPMI_TIMEOUT_JIFFIES; | 
 | 	add_timer(&ipmi_timer); | 
 |  | 
 | 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block); | 
 |  | 
 | 	initialized = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static __init int ipmi_init_msghandler_mod(void) | 
 | { | 
 | 	ipmi_init_msghandler(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static __exit void cleanup_ipmi(void) | 
 | { | 
 | 	int count; | 
 |  | 
 | 	if (!initialized) | 
 | 		return; | 
 |  | 
 | 	atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block); | 
 |  | 
 | 	/* This can't be called if any interfaces exist, so no worry about | 
 | 	   shutting down the interfaces. */ | 
 |  | 
 | 	/* Tell the timer to stop, then wait for it to stop.  This avoids | 
 | 	   problems with race conditions removing the timer here. */ | 
 | 	atomic_inc(&stop_operation); | 
 | 	del_timer_sync(&ipmi_timer); | 
 |  | 
 | #ifdef CONFIG_PROC_FS | 
 | 	remove_proc_entry(proc_ipmi_root->name, &proc_root); | 
 | #endif /* CONFIG_PROC_FS */ | 
 |  | 
 | 	driver_unregister(&ipmidriver); | 
 |  | 
 | 	initialized = 0; | 
 |  | 
 | 	/* Check for buffer leaks. */ | 
 | 	count = atomic_read(&smi_msg_inuse_count); | 
 | 	if (count != 0) | 
 | 		printk(KERN_WARNING PFX "SMI message count %d at exit\n", | 
 | 		       count); | 
 | 	count = atomic_read(&recv_msg_inuse_count); | 
 | 	if (count != 0) | 
 | 		printk(KERN_WARNING PFX "recv message count %d at exit\n", | 
 | 		       count); | 
 | } | 
 | module_exit(cleanup_ipmi); | 
 |  | 
 | module_init(ipmi_init_msghandler_mod); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); | 
 | MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI interface."); | 
 | MODULE_VERSION(IPMI_DRIVER_VERSION); | 
 |  | 
 | EXPORT_SYMBOL(ipmi_create_user); | 
 | EXPORT_SYMBOL(ipmi_destroy_user); | 
 | EXPORT_SYMBOL(ipmi_get_version); | 
 | EXPORT_SYMBOL(ipmi_request_settime); | 
 | EXPORT_SYMBOL(ipmi_request_supply_msgs); | 
 | EXPORT_SYMBOL(ipmi_register_smi); | 
 | EXPORT_SYMBOL(ipmi_unregister_smi); | 
 | EXPORT_SYMBOL(ipmi_register_for_cmd); | 
 | EXPORT_SYMBOL(ipmi_unregister_for_cmd); | 
 | EXPORT_SYMBOL(ipmi_smi_msg_received); | 
 | EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); | 
 | EXPORT_SYMBOL(ipmi_alloc_smi_msg); | 
 | EXPORT_SYMBOL(ipmi_addr_length); | 
 | EXPORT_SYMBOL(ipmi_validate_addr); | 
 | EXPORT_SYMBOL(ipmi_set_gets_events); | 
 | EXPORT_SYMBOL(ipmi_smi_watcher_register); | 
 | EXPORT_SYMBOL(ipmi_smi_watcher_unregister); | 
 | EXPORT_SYMBOL(ipmi_set_my_address); | 
 | EXPORT_SYMBOL(ipmi_get_my_address); | 
 | EXPORT_SYMBOL(ipmi_set_my_LUN); | 
 | EXPORT_SYMBOL(ipmi_get_my_LUN); | 
 | EXPORT_SYMBOL(ipmi_smi_add_proc_entry); | 
 | EXPORT_SYMBOL(ipmi_user_set_run_to_completion); | 
 | EXPORT_SYMBOL(ipmi_free_recv_msg); |