| /* | |
| * linux/arch/arm/kernel/arch_timer.c | |
| * | |
| * Copyright (C) 2011 ARM Ltd. | |
| * All Rights Reserved | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/smp.h> | |
| #include <linux/cpu.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/io.h> | |
| #include <asm/cputype.h> | |
| #include <asm/localtimer.h> | |
| #include <asm/arch_timer.h> | |
| #include <asm/system_info.h> | |
| #include <asm/sched_clock.h> | |
| static unsigned long arch_timer_rate; | |
| static int arch_timer_ppi; | |
| static int arch_timer_ppi2; | |
| static struct clock_event_device __percpu **arch_timer_evt; | |
| extern void init_current_timer_delay(unsigned long freq); | |
| /* | |
| * Architected system timer support. | |
| */ | |
| #define ARCH_TIMER_CTRL_ENABLE (1 << 0) | |
| #define ARCH_TIMER_CTRL_IT_MASK (1 << 1) | |
| #define ARCH_TIMER_CTRL_IT_STAT (1 << 2) | |
| #define ARCH_TIMER_REG_CTRL 0 | |
| #define ARCH_TIMER_REG_FREQ 1 | |
| #define ARCH_TIMER_REG_TVAL 2 | |
| static void arch_timer_reg_write(int reg, u32 val) | |
| { | |
| switch (reg) { | |
| case ARCH_TIMER_REG_CTRL: | |
| asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); | |
| break; | |
| case ARCH_TIMER_REG_TVAL: | |
| asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); | |
| break; | |
| } | |
| isb(); | |
| } | |
| static u32 arch_timer_reg_read(int reg) | |
| { | |
| u32 val; | |
| switch (reg) { | |
| case ARCH_TIMER_REG_CTRL: | |
| asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); | |
| break; | |
| case ARCH_TIMER_REG_FREQ: | |
| asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); | |
| break; | |
| case ARCH_TIMER_REG_TVAL: | |
| asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return val; | |
| } | |
| static irqreturn_t arch_timer_handler(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = *(struct clock_event_device **)dev_id; | |
| unsigned long ctrl; | |
| ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); | |
| if (ctrl & ARCH_TIMER_CTRL_IT_STAT) { | |
| ctrl |= ARCH_TIMER_CTRL_IT_MASK; | |
| arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| return IRQ_NONE; | |
| } | |
| static void arch_timer_disable(void) | |
| { | |
| unsigned long ctrl; | |
| ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); | |
| ctrl &= ~ARCH_TIMER_CTRL_ENABLE; | |
| arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); | |
| } | |
| static void arch_timer_set_mode(enum clock_event_mode mode, | |
| struct clock_event_device *clk) | |
| { | |
| switch (mode) { | |
| case CLOCK_EVT_MODE_UNUSED: | |
| case CLOCK_EVT_MODE_SHUTDOWN: | |
| arch_timer_disable(); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static int arch_timer_set_next_event(unsigned long evt, | |
| struct clock_event_device *unused) | |
| { | |
| unsigned long ctrl; | |
| ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); | |
| ctrl |= ARCH_TIMER_CTRL_ENABLE; | |
| ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; | |
| arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt); | |
| arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); | |
| return 0; | |
| } | |
| static int __cpuinit arch_timer_setup(struct clock_event_device *clk) | |
| { | |
| /* Be safe... */ | |
| arch_timer_disable(); | |
| clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; | |
| clk->name = "arch_sys_timer"; | |
| clk->rating = 450; | |
| clk->set_mode = arch_timer_set_mode; | |
| clk->set_next_event = arch_timer_set_next_event; | |
| clk->irq = arch_timer_ppi; | |
| clockevents_config_and_register(clk, arch_timer_rate, | |
| 0xf, 0x7fffffff); | |
| *__this_cpu_ptr(arch_timer_evt) = clk; | |
| enable_percpu_irq(clk->irq, 0); | |
| if (arch_timer_ppi2) | |
| enable_percpu_irq(arch_timer_ppi2, 0); | |
| return 0; | |
| } | |
| /* Is the optional system timer available? */ | |
| static int local_timer_is_architected(void) | |
| { | |
| return (cpu_architecture() >= CPU_ARCH_ARMv7) && | |
| ((read_cpuid_ext(CPUID_EXT_PFR1) >> 16) & 0xf) == 1; | |
| } | |
| static int arch_timer_available(void) | |
| { | |
| unsigned long freq; | |
| if (!local_timer_is_architected()) | |
| return -ENXIO; | |
| if (arch_timer_rate == 0) { | |
| arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0); | |
| freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ); | |
| /* Check the timer frequency. */ | |
| if (freq == 0) { | |
| pr_warn("Architected timer frequency not available\n"); | |
| return -EINVAL; | |
| } | |
| arch_timer_rate = freq; | |
| } | |
| pr_info_once("Architected local timer running at %lu.%02luMHz.\n", | |
| arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100); | |
| return 0; | |
| } | |
| static inline cycle_t arch_counter_get_cntpct(void) | |
| { | |
| u32 cvall, cvalh; | |
| asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); | |
| return ((cycle_t) cvalh << 32) | cvall; | |
| } | |
| static inline cycle_t arch_counter_get_cntvct(void) | |
| { | |
| u32 cvall, cvalh; | |
| asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); | |
| return ((cycle_t) cvalh << 32) | cvall; | |
| } | |
| static u32 notrace arch_counter_get_cntvct32(void) | |
| { | |
| cycle_t cntvct = arch_counter_get_cntvct(); | |
| /* | |
| * The sched_clock infrastructure only knows about counters | |
| * with at most 32bits. Forget about the upper 24 bits for the | |
| * time being... | |
| */ | |
| return (u32)(cntvct & (u32)~0); | |
| } | |
| static cycle_t arch_counter_read(struct clocksource *cs) | |
| { | |
| return arch_counter_get_cntpct(); | |
| } | |
| int read_current_timer(unsigned long *timer_val) | |
| { | |
| if (!arch_timer_rate) | |
| return -ENXIO; | |
| *timer_val = arch_counter_get_cntpct(); | |
| return 0; | |
| } | |
| static struct clocksource clocksource_counter = { | |
| .name = "arch_sys_counter", | |
| .rating = 400, | |
| .read = arch_counter_read, | |
| .mask = CLOCKSOURCE_MASK(56), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| }; | |
| static void __cpuinit arch_timer_stop(struct clock_event_device *clk) | |
| { | |
| pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n", | |
| clk->irq, smp_processor_id()); | |
| disable_percpu_irq(clk->irq); | |
| if (arch_timer_ppi2) | |
| disable_percpu_irq(arch_timer_ppi2); | |
| arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk); | |
| } | |
| static struct local_timer_ops arch_timer_ops __cpuinitdata = { | |
| .setup = arch_timer_setup, | |
| .stop = arch_timer_stop, | |
| }; | |
| static struct clock_event_device arch_timer_global_evt; | |
| static int __init arch_timer_register(void) | |
| { | |
| int err; | |
| err = arch_timer_available(); | |
| if (err) | |
| return err; | |
| arch_timer_evt = alloc_percpu(struct clock_event_device *); | |
| if (!arch_timer_evt) | |
| return -ENOMEM; | |
| clocksource_register_hz(&clocksource_counter, arch_timer_rate); | |
| err = request_percpu_irq(arch_timer_ppi, arch_timer_handler, | |
| "arch_timer", arch_timer_evt); | |
| if (err) { | |
| pr_err("arch_timer: can't register interrupt %d (%d)\n", | |
| arch_timer_ppi, err); | |
| goto out_free; | |
| } | |
| if (arch_timer_ppi2) { | |
| err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler, | |
| "arch_timer", arch_timer_evt); | |
| if (err) { | |
| pr_err("arch_timer: can't register interrupt %d (%d)\n", | |
| arch_timer_ppi2, err); | |
| arch_timer_ppi2 = 0; | |
| goto out_free_irq; | |
| } | |
| } | |
| err = local_timer_register(&arch_timer_ops); | |
| if (err) { | |
| /* | |
| * We couldn't register as a local timer (could be | |
| * because we're on a UP platform, or because some | |
| * other local timer is already present...). Try as a | |
| * global timer instead. | |
| */ | |
| arch_timer_global_evt.cpumask = cpumask_of(0); | |
| err = arch_timer_setup(&arch_timer_global_evt); | |
| } | |
| if (err) | |
| goto out_free_irq; | |
| init_current_timer_delay(arch_timer_rate); | |
| return 0; | |
| out_free_irq: | |
| free_percpu_irq(arch_timer_ppi, arch_timer_evt); | |
| if (arch_timer_ppi2) | |
| free_percpu_irq(arch_timer_ppi2, arch_timer_evt); | |
| out_free: | |
| free_percpu(arch_timer_evt); | |
| return err; | |
| } | |
| static const struct of_device_id arch_timer_of_match[] __initconst = { | |
| { .compatible = "arm,armv7-timer", }, | |
| {}, | |
| }; | |
| int __init arch_timer_of_register(void) | |
| { | |
| struct device_node *np; | |
| u32 freq; | |
| np = of_find_matching_node(NULL, arch_timer_of_match); | |
| if (!np) { | |
| pr_err("arch_timer: can't find DT node\n"); | |
| return -ENODEV; | |
| } | |
| /* Try to determine the frequency from the device tree or CNTFRQ */ | |
| if (!of_property_read_u32(np, "clock-frequency", &freq)) | |
| arch_timer_rate = freq; | |
| arch_timer_ppi = irq_of_parse_and_map(np, 0); | |
| arch_timer_ppi2 = irq_of_parse_and_map(np, 1); | |
| pr_info("arch_timer: found %s irqs %d %d\n", | |
| np->name, arch_timer_ppi, arch_timer_ppi2); | |
| return arch_timer_register(); | |
| } | |
| int __init arch_timer_sched_clock_init(void) | |
| { | |
| int err; | |
| err = arch_timer_available(); | |
| if (err) | |
| return err; | |
| setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate); | |
| return 0; | |
| } |