| /* |
| * wm8804.c -- WM8804 S/PDIF transceiver driver |
| * |
| * Copyright 2010-11 Wolfson Microelectronics plc |
| * |
| * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| #include <sound/soc-dapm.h> |
| |
| #include "wm8804.h" |
| |
| #define WM8804_NUM_SUPPLIES 2 |
| static const char *wm8804_supply_names[WM8804_NUM_SUPPLIES] = { |
| "PVDD", |
| "DVDD" |
| }; |
| |
| static const struct reg_default wm8804_reg_defaults[] = { |
| { 3, 0x21 }, /* R3 - PLL1 */ |
| { 4, 0xFD }, /* R4 - PLL2 */ |
| { 5, 0x36 }, /* R5 - PLL3 */ |
| { 6, 0x07 }, /* R6 - PLL4 */ |
| { 7, 0x16 }, /* R7 - PLL5 */ |
| { 8, 0x18 }, /* R8 - PLL6 */ |
| { 9, 0xFF }, /* R9 - SPDMODE */ |
| { 10, 0x00 }, /* R10 - INTMASK */ |
| { 18, 0x00 }, /* R18 - SPDTX1 */ |
| { 19, 0x00 }, /* R19 - SPDTX2 */ |
| { 20, 0x00 }, /* R20 - SPDTX3 */ |
| { 21, 0x71 }, /* R21 - SPDTX4 */ |
| { 22, 0x0B }, /* R22 - SPDTX5 */ |
| { 23, 0x70 }, /* R23 - GPO0 */ |
| { 24, 0x57 }, /* R24 - GPO1 */ |
| { 26, 0x42 }, /* R26 - GPO2 */ |
| { 27, 0x06 }, /* R27 - AIFTX */ |
| { 28, 0x06 }, /* R28 - AIFRX */ |
| { 29, 0x80 }, /* R29 - SPDRX1 */ |
| { 30, 0x07 }, /* R30 - PWRDN */ |
| }; |
| |
| struct wm8804_priv { |
| struct device *dev; |
| struct regmap *regmap; |
| struct regulator_bulk_data supplies[WM8804_NUM_SUPPLIES]; |
| struct notifier_block disable_nb[WM8804_NUM_SUPPLIES]; |
| int mclk_div; |
| |
| struct gpio_desc *reset; |
| |
| int aif_pwr; |
| }; |
| |
| static int txsrc_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol); |
| |
| static int wm8804_aif_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event); |
| |
| /* |
| * We can't use the same notifier block for more than one supply and |
| * there's no way I can see to get from a callback to the caller |
| * except container_of(). |
| */ |
| #define WM8804_REGULATOR_EVENT(n) \ |
| static int wm8804_regulator_event_##n(struct notifier_block *nb, \ |
| unsigned long event, void *data) \ |
| { \ |
| struct wm8804_priv *wm8804 = container_of(nb, struct wm8804_priv, \ |
| disable_nb[n]); \ |
| if (event & REGULATOR_EVENT_DISABLE) { \ |
| regcache_mark_dirty(wm8804->regmap); \ |
| } \ |
| return 0; \ |
| } |
| |
| WM8804_REGULATOR_EVENT(0) |
| WM8804_REGULATOR_EVENT(1) |
| |
| static const char *txsrc_text[] = { "S/PDIF RX", "AIF" }; |
| static SOC_ENUM_SINGLE_DECL(txsrc, WM8804_SPDTX4, 6, txsrc_text); |
| |
| static const struct snd_kcontrol_new wm8804_tx_source_mux[] = { |
| SOC_DAPM_ENUM_EXT("Input Source", txsrc, |
| snd_soc_dapm_get_enum_double, txsrc_put), |
| }; |
| |
| static const struct snd_soc_dapm_widget wm8804_dapm_widgets[] = { |
| SND_SOC_DAPM_OUTPUT("SPDIF Out"), |
| SND_SOC_DAPM_INPUT("SPDIF In"), |
| |
| SND_SOC_DAPM_PGA("SPDIFTX", WM8804_PWRDN, 2, 1, NULL, 0), |
| SND_SOC_DAPM_PGA("SPDIFRX", WM8804_PWRDN, 1, 1, NULL, 0), |
| |
| SND_SOC_DAPM_MUX("Tx Source", SND_SOC_NOPM, 6, 0, wm8804_tx_source_mux), |
| |
| SND_SOC_DAPM_AIF_OUT_E("AIFTX", NULL, 0, SND_SOC_NOPM, 0, 0, wm8804_aif_event, |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), |
| SND_SOC_DAPM_AIF_IN_E("AIFRX", NULL, 0, SND_SOC_NOPM, 0, 0, wm8804_aif_event, |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), |
| }; |
| |
| static const struct snd_soc_dapm_route wm8804_dapm_routes[] = { |
| { "AIFRX", NULL, "Playback" }, |
| { "Tx Source", "AIF", "AIFRX" }, |
| |
| { "SPDIFRX", NULL, "SPDIF In" }, |
| { "Tx Source", "S/PDIF RX", "SPDIFRX" }, |
| |
| { "SPDIFTX", NULL, "Tx Source" }, |
| { "SPDIF Out", NULL, "SPDIFTX" }, |
| |
| { "AIFTX", NULL, "SPDIFRX" }, |
| { "Capture", NULL, "AIFTX" }, |
| }; |
| |
| static int wm8804_aif_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); |
| struct wm8804_priv *wm8804 = snd_soc_component_get_drvdata(component); |
| |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| /* power up the aif */ |
| if (!wm8804->aif_pwr) |
| snd_soc_component_update_bits(component, WM8804_PWRDN, 0x10, 0x0); |
| wm8804->aif_pwr++; |
| break; |
| case SND_SOC_DAPM_POST_PMD: |
| /* power down only both paths are disabled */ |
| wm8804->aif_pwr--; |
| if (!wm8804->aif_pwr) |
| snd_soc_component_update_bits(component, WM8804_PWRDN, 0x10, 0x10); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int txsrc_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol); |
| struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); |
| struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; |
| unsigned int val = ucontrol->value.enumerated.item[0] << e->shift_l; |
| unsigned int mask = 1 << e->shift_l; |
| unsigned int txpwr; |
| |
| if (val != 0 && val != mask) |
| return -EINVAL; |
| |
| snd_soc_dapm_mutex_lock(dapm); |
| |
| if (snd_soc_component_test_bits(component, e->reg, mask, val)) { |
| /* save the current power state of the transmitter */ |
| txpwr = snd_soc_component_read32(component, WM8804_PWRDN) & 0x4; |
| |
| /* power down the transmitter */ |
| snd_soc_component_update_bits(component, WM8804_PWRDN, 0x4, 0x4); |
| |
| /* set the tx source */ |
| snd_soc_component_update_bits(component, e->reg, mask, val); |
| |
| /* restore the transmitter's configuration */ |
| snd_soc_component_update_bits(component, WM8804_PWRDN, 0x4, txpwr); |
| } |
| |
| snd_soc_dapm_mutex_unlock(dapm); |
| |
| return 0; |
| } |
| |
| static bool wm8804_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case WM8804_RST_DEVID1: |
| case WM8804_DEVID2: |
| case WM8804_DEVREV: |
| case WM8804_INTSTAT: |
| case WM8804_SPDSTAT: |
| case WM8804_RXCHAN1: |
| case WM8804_RXCHAN2: |
| case WM8804_RXCHAN3: |
| case WM8804_RXCHAN4: |
| case WM8804_RXCHAN5: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static int wm8804_soft_reset(struct wm8804_priv *wm8804) |
| { |
| return regmap_write(wm8804->regmap, WM8804_RST_DEVID1, 0x0); |
| } |
| |
| static int wm8804_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_component *component; |
| u16 format, master, bcp, lrp; |
| |
| component = dai->component; |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| format = 0x2; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| format = 0x0; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| format = 0x1; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| case SND_SOC_DAIFMT_DSP_B: |
| format = 0x3; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown dai format\n"); |
| return -EINVAL; |
| } |
| |
| /* set data format */ |
| snd_soc_component_update_bits(component, WM8804_AIFTX, 0x3, format); |
| snd_soc_component_update_bits(component, WM8804_AIFRX, 0x3, format); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| master = 1; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| master = 0; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown master/slave configuration\n"); |
| return -EINVAL; |
| } |
| |
| /* set master/slave mode */ |
| snd_soc_component_update_bits(component, WM8804_AIFRX, 0x40, master << 6); |
| |
| bcp = lrp = 0; |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| bcp = lrp = 1; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| bcp = 1; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| lrp = 1; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown polarity configuration\n"); |
| return -EINVAL; |
| } |
| |
| /* set frame inversion */ |
| snd_soc_component_update_bits(component, WM8804_AIFTX, 0x10 | 0x20, |
| (bcp << 4) | (lrp << 5)); |
| snd_soc_component_update_bits(component, WM8804_AIFRX, 0x10 | 0x20, |
| (bcp << 4) | (lrp << 5)); |
| return 0; |
| } |
| |
| static int wm8804_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component; |
| u16 blen; |
| |
| component = dai->component; |
| |
| switch (params_width(params)) { |
| case 16: |
| blen = 0x0; |
| break; |
| case 20: |
| blen = 0x1; |
| break; |
| case 24: |
| blen = 0x2; |
| break; |
| default: |
| dev_err(dai->dev, "Unsupported word length: %u\n", |
| params_width(params)); |
| return -EINVAL; |
| } |
| |
| /* set word length */ |
| snd_soc_component_update_bits(component, WM8804_AIFTX, 0xc, blen << 2); |
| snd_soc_component_update_bits(component, WM8804_AIFRX, 0xc, blen << 2); |
| |
| return 0; |
| } |
| |
| struct pll_div { |
| u32 prescale:1; |
| u32 mclkdiv:1; |
| u32 freqmode:2; |
| u32 n:4; |
| u32 k:22; |
| }; |
| |
| /* PLL rate to output rate divisions */ |
| static struct { |
| unsigned int div; |
| unsigned int freqmode; |
| unsigned int mclkdiv; |
| } post_table[] = { |
| { 2, 0, 0 }, |
| { 4, 0, 1 }, |
| { 4, 1, 0 }, |
| { 8, 1, 1 }, |
| { 8, 2, 0 }, |
| { 16, 2, 1 }, |
| { 12, 3, 0 }, |
| { 24, 3, 1 } |
| }; |
| |
| #define FIXED_PLL_SIZE ((1ULL << 22) * 10) |
| static int pll_factors(struct pll_div *pll_div, unsigned int target, |
| unsigned int source, unsigned int mclk_div) |
| { |
| u64 Kpart; |
| unsigned long int K, Ndiv, Nmod, tmp; |
| int i; |
| |
| /* |
| * Scale the output frequency up; the PLL should run in the |
| * region of 90-100MHz. |
| */ |
| for (i = 0; i < ARRAY_SIZE(post_table); i++) { |
| tmp = target * post_table[i].div; |
| if ((tmp >= 90000000 && tmp <= 100000000) && |
| (mclk_div == post_table[i].mclkdiv)) { |
| pll_div->freqmode = post_table[i].freqmode; |
| pll_div->mclkdiv = post_table[i].mclkdiv; |
| target *= post_table[i].div; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(post_table)) { |
| pr_err("%s: Unable to scale output frequency: %uHz\n", |
| __func__, target); |
| return -EINVAL; |
| } |
| |
| pll_div->prescale = 0; |
| Ndiv = target / source; |
| if (Ndiv < 5) { |
| source >>= 1; |
| pll_div->prescale = 1; |
| Ndiv = target / source; |
| } |
| |
| if (Ndiv < 5 || Ndiv > 13) { |
| pr_err("%s: WM8804 N value is not within the recommended range: %lu\n", |
| __func__, Ndiv); |
| return -EINVAL; |
| } |
| pll_div->n = Ndiv; |
| |
| Nmod = target % source; |
| Kpart = FIXED_PLL_SIZE * (u64)Nmod; |
| |
| do_div(Kpart, source); |
| |
| K = Kpart & 0xffffffff; |
| if ((K % 10) >= 5) |
| K += 5; |
| K /= 10; |
| pll_div->k = K; |
| |
| return 0; |
| } |
| |
| static int wm8804_set_pll(struct snd_soc_dai *dai, int pll_id, |
| int source, unsigned int freq_in, |
| unsigned int freq_out) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct wm8804_priv *wm8804 = snd_soc_component_get_drvdata(component); |
| bool change; |
| |
| if (!freq_in || !freq_out) { |
| /* disable the PLL */ |
| regmap_update_bits_check(wm8804->regmap, WM8804_PWRDN, |
| 0x1, 0x1, &change); |
| if (change) |
| pm_runtime_put(wm8804->dev); |
| } else { |
| int ret; |
| struct pll_div pll_div; |
| |
| ret = pll_factors(&pll_div, freq_out, freq_in, |
| wm8804->mclk_div); |
| if (ret) |
| return ret; |
| |
| /* power down the PLL before reprogramming it */ |
| regmap_update_bits_check(wm8804->regmap, WM8804_PWRDN, |
| 0x1, 0x1, &change); |
| if (!change) |
| pm_runtime_get_sync(wm8804->dev); |
| |
| /* set PLLN and PRESCALE */ |
| snd_soc_component_update_bits(component, WM8804_PLL4, 0xf | 0x10, |
| pll_div.n | (pll_div.prescale << 4)); |
| /* set mclkdiv and freqmode */ |
| snd_soc_component_update_bits(component, WM8804_PLL5, 0x3 | 0x8, |
| pll_div.freqmode | (pll_div.mclkdiv << 3)); |
| /* set PLLK */ |
| snd_soc_component_write(component, WM8804_PLL1, pll_div.k & 0xff); |
| snd_soc_component_write(component, WM8804_PLL2, (pll_div.k >> 8) & 0xff); |
| snd_soc_component_write(component, WM8804_PLL3, pll_div.k >> 16); |
| |
| /* power up the PLL */ |
| snd_soc_component_update_bits(component, WM8804_PWRDN, 0x1, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int wm8804_set_sysclk(struct snd_soc_dai *dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_component *component; |
| |
| component = dai->component; |
| |
| switch (clk_id) { |
| case WM8804_TX_CLKSRC_MCLK: |
| if ((freq >= 10000000 && freq <= 14400000) |
| || (freq >= 16280000 && freq <= 27000000)) |
| snd_soc_component_update_bits(component, WM8804_PLL6, 0x80, 0x80); |
| else { |
| dev_err(dai->dev, "OSCCLOCK is not within the " |
| "recommended range: %uHz\n", freq); |
| return -EINVAL; |
| } |
| break; |
| case WM8804_TX_CLKSRC_PLL: |
| snd_soc_component_update_bits(component, WM8804_PLL6, 0x80, 0); |
| break; |
| case WM8804_CLKOUT_SRC_CLK1: |
| snd_soc_component_update_bits(component, WM8804_PLL6, 0x8, 0); |
| break; |
| case WM8804_CLKOUT_SRC_OSCCLK: |
| snd_soc_component_update_bits(component, WM8804_PLL6, 0x8, 0x8); |
| break; |
| default: |
| dev_err(dai->dev, "Unknown clock source: %d\n", clk_id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8804_set_clkdiv(struct snd_soc_dai *dai, |
| int div_id, int div) |
| { |
| struct snd_soc_component *component; |
| struct wm8804_priv *wm8804; |
| |
| component = dai->component; |
| switch (div_id) { |
| case WM8804_CLKOUT_DIV: |
| snd_soc_component_update_bits(component, WM8804_PLL5, 0x30, |
| (div & 0x3) << 4); |
| break; |
| case WM8804_MCLK_DIV: |
| wm8804 = snd_soc_component_get_drvdata(component); |
| wm8804->mclk_div = div; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown clock divider: %d\n", div_id); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops wm8804_dai_ops = { |
| .hw_params = wm8804_hw_params, |
| .set_fmt = wm8804_set_fmt, |
| .set_sysclk = wm8804_set_sysclk, |
| .set_clkdiv = wm8804_set_clkdiv, |
| .set_pll = wm8804_set_pll |
| }; |
| |
| #define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE) |
| |
| #define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ |
| SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \ |
| SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000) |
| |
| static struct snd_soc_dai_driver wm8804_dai = { |
| .name = "wm8804-spdif", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM8804_RATES, |
| .formats = WM8804_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM8804_RATES, |
| .formats = WM8804_FORMATS, |
| }, |
| .ops = &wm8804_dai_ops, |
| .symmetric_rates = 1 |
| }; |
| |
| static const struct snd_soc_component_driver soc_component_dev_wm8804 = { |
| .dapm_widgets = wm8804_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm8804_dapm_widgets), |
| .dapm_routes = wm8804_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(wm8804_dapm_routes), |
| .use_pmdown_time = 1, |
| .endianness = 1, |
| .non_legacy_dai_naming = 1, |
| }; |
| |
| const struct regmap_config wm8804_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = WM8804_MAX_REGISTER, |
| .volatile_reg = wm8804_volatile, |
| |
| .cache_type = REGCACHE_RBTREE, |
| .reg_defaults = wm8804_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(wm8804_reg_defaults), |
| }; |
| EXPORT_SYMBOL_GPL(wm8804_regmap_config); |
| |
| int wm8804_probe(struct device *dev, struct regmap *regmap) |
| { |
| struct wm8804_priv *wm8804; |
| unsigned int id1, id2; |
| int i, ret; |
| |
| wm8804 = devm_kzalloc(dev, sizeof(*wm8804), GFP_KERNEL); |
| if (!wm8804) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, wm8804); |
| |
| wm8804->dev = dev; |
| wm8804->regmap = regmap; |
| |
| wm8804->reset = devm_gpiod_get_optional(dev, "wlf,reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(wm8804->reset)) { |
| ret = PTR_ERR(wm8804->reset); |
| dev_err(dev, "Failed to get reset line: %d\n", ret); |
| return ret; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm8804->supplies); i++) |
| wm8804->supplies[i].supply = wm8804_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(wm8804->supplies), |
| wm8804->supplies); |
| if (ret) { |
| dev_err(dev, "Failed to request supplies: %d\n", ret); |
| return ret; |
| } |
| |
| wm8804->disable_nb[0].notifier_call = wm8804_regulator_event_0; |
| wm8804->disable_nb[1].notifier_call = wm8804_regulator_event_1; |
| |
| /* This should really be moved into the regulator core */ |
| for (i = 0; i < ARRAY_SIZE(wm8804->supplies); i++) { |
| struct regulator *regulator = wm8804->supplies[i].consumer; |
| |
| ret = devm_regulator_register_notifier(regulator, |
| &wm8804->disable_nb[i]); |
| if (ret != 0) { |
| dev_err(dev, |
| "Failed to register regulator notifier: %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8804->supplies), |
| wm8804->supplies); |
| if (ret) { |
| dev_err(dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| gpiod_set_value_cansleep(wm8804->reset, 1); |
| |
| ret = regmap_read(regmap, WM8804_RST_DEVID1, &id1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read device ID: %d\n", ret); |
| goto err_reg_enable; |
| } |
| |
| ret = regmap_read(regmap, WM8804_DEVID2, &id2); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read device ID: %d\n", ret); |
| goto err_reg_enable; |
| } |
| |
| id2 = (id2 << 8) | id1; |
| |
| if (id2 != 0x8805) { |
| dev_err(dev, "Invalid device ID: %#x\n", id2); |
| ret = -EINVAL; |
| goto err_reg_enable; |
| } |
| |
| ret = regmap_read(regmap, WM8804_DEVREV, &id1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to read device revision: %d\n", |
| ret); |
| goto err_reg_enable; |
| } |
| dev_info(dev, "revision %c\n", id1 + 'A'); |
| |
| if (!wm8804->reset) { |
| ret = wm8804_soft_reset(wm8804); |
| if (ret < 0) { |
| dev_err(dev, "Failed to issue reset: %d\n", ret); |
| goto err_reg_enable; |
| } |
| } |
| |
| ret = devm_snd_soc_register_component(dev, &soc_component_dev_wm8804, |
| &wm8804_dai, 1); |
| if (ret < 0) { |
| dev_err(dev, "Failed to register CODEC: %d\n", ret); |
| goto err_reg_enable; |
| } |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_idle(dev); |
| |
| return 0; |
| |
| err_reg_enable: |
| regulator_bulk_disable(ARRAY_SIZE(wm8804->supplies), wm8804->supplies); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wm8804_probe); |
| |
| void wm8804_remove(struct device *dev) |
| { |
| pm_runtime_disable(dev); |
| } |
| EXPORT_SYMBOL_GPL(wm8804_remove); |
| |
| #if IS_ENABLED(CONFIG_PM) |
| static int wm8804_runtime_resume(struct device *dev) |
| { |
| struct wm8804_priv *wm8804 = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm8804->supplies), |
| wm8804->supplies); |
| if (ret) { |
| dev_err(wm8804->dev, "Failed to enable supplies: %d\n", ret); |
| return ret; |
| } |
| |
| regcache_sync(wm8804->regmap); |
| |
| /* Power up OSCCLK */ |
| regmap_update_bits(wm8804->regmap, WM8804_PWRDN, 0x8, 0x0); |
| |
| return 0; |
| } |
| |
| static int wm8804_runtime_suspend(struct device *dev) |
| { |
| struct wm8804_priv *wm8804 = dev_get_drvdata(dev); |
| |
| /* Power down OSCCLK */ |
| regmap_update_bits(wm8804->regmap, WM8804_PWRDN, 0x8, 0x8); |
| |
| regulator_bulk_disable(ARRAY_SIZE(wm8804->supplies), |
| wm8804->supplies); |
| |
| return 0; |
| } |
| #endif |
| |
| const struct dev_pm_ops wm8804_pm = { |
| SET_RUNTIME_PM_OPS(wm8804_runtime_suspend, wm8804_runtime_resume, NULL) |
| }; |
| EXPORT_SYMBOL_GPL(wm8804_pm); |
| |
| MODULE_DESCRIPTION("ASoC WM8804 driver"); |
| MODULE_AUTHOR("Dimitris Papastamos <dp@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |