| /* |
| * nau8810.c -- NAU8810 ALSA Soc Audio driver |
| * |
| * Copyright 2016 Nuvoton Technology Corp. |
| * |
| * Author: David Lin <ctlin0@nuvoton.com> |
| * |
| * Based on WM8974.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "nau8810.h" |
| |
| #define NAU_PLL_FREQ_MAX 100000000 |
| #define NAU_PLL_FREQ_MIN 90000000 |
| #define NAU_PLL_REF_MAX 33000000 |
| #define NAU_PLL_REF_MIN 8000000 |
| #define NAU_PLL_OPTOP_MIN 6 |
| |
| |
| static const int nau8810_mclk_scaler[] = { 10, 15, 20, 30, 40, 60, 80, 120 }; |
| |
| static const struct reg_default nau8810_reg_defaults[] = { |
| { NAU8810_REG_POWER1, 0x0000 }, |
| { NAU8810_REG_POWER2, 0x0000 }, |
| { NAU8810_REG_POWER3, 0x0000 }, |
| { NAU8810_REG_IFACE, 0x0050 }, |
| { NAU8810_REG_COMP, 0x0000 }, |
| { NAU8810_REG_CLOCK, 0x0140 }, |
| { NAU8810_REG_SMPLR, 0x0000 }, |
| { NAU8810_REG_DAC, 0x0000 }, |
| { NAU8810_REG_DACGAIN, 0x00FF }, |
| { NAU8810_REG_ADC, 0x0100 }, |
| { NAU8810_REG_ADCGAIN, 0x00FF }, |
| { NAU8810_REG_EQ1, 0x012C }, |
| { NAU8810_REG_EQ2, 0x002C }, |
| { NAU8810_REG_EQ3, 0x002C }, |
| { NAU8810_REG_EQ4, 0x002C }, |
| { NAU8810_REG_EQ5, 0x002C }, |
| { NAU8810_REG_DACLIM1, 0x0032 }, |
| { NAU8810_REG_DACLIM2, 0x0000 }, |
| { NAU8810_REG_NOTCH1, 0x0000 }, |
| { NAU8810_REG_NOTCH2, 0x0000 }, |
| { NAU8810_REG_NOTCH3, 0x0000 }, |
| { NAU8810_REG_NOTCH4, 0x0000 }, |
| { NAU8810_REG_ALC1, 0x0038 }, |
| { NAU8810_REG_ALC2, 0x000B }, |
| { NAU8810_REG_ALC3, 0x0032 }, |
| { NAU8810_REG_NOISEGATE, 0x0000 }, |
| { NAU8810_REG_PLLN, 0x0008 }, |
| { NAU8810_REG_PLLK1, 0x000C }, |
| { NAU8810_REG_PLLK2, 0x0093 }, |
| { NAU8810_REG_PLLK3, 0x00E9 }, |
| { NAU8810_REG_ATTEN, 0x0000 }, |
| { NAU8810_REG_INPUT_SIGNAL, 0x0003 }, |
| { NAU8810_REG_PGAGAIN, 0x0010 }, |
| { NAU8810_REG_ADCBOOST, 0x0100 }, |
| { NAU8810_REG_OUTPUT, 0x0002 }, |
| { NAU8810_REG_SPKMIX, 0x0001 }, |
| { NAU8810_REG_SPKGAIN, 0x0039 }, |
| { NAU8810_REG_MONOMIX, 0x0001 }, |
| { NAU8810_REG_POWER4, 0x0000 }, |
| { NAU8810_REG_TSLOTCTL1, 0x0000 }, |
| { NAU8810_REG_TSLOTCTL2, 0x0020 }, |
| { NAU8810_REG_DEVICE_REVID, 0x0000 }, |
| { NAU8810_REG_I2C_DEVICEID, 0x001A }, |
| { NAU8810_REG_ADDITIONID, 0x00CA }, |
| { NAU8810_REG_RESERVE, 0x0124 }, |
| { NAU8810_REG_OUTCTL, 0x0001 }, |
| { NAU8810_REG_ALC1ENHAN1, 0x0010 }, |
| { NAU8810_REG_ALC1ENHAN2, 0x0000 }, |
| { NAU8810_REG_MISCCTL, 0x0000 }, |
| { NAU8810_REG_OUTTIEOFF, 0x0000 }, |
| { NAU8810_REG_AGCP2POUT, 0x0000 }, |
| { NAU8810_REG_AGCPOUT, 0x0000 }, |
| { NAU8810_REG_AMTCTL, 0x0000 }, |
| { NAU8810_REG_OUTTIEOFFMAN, 0x0000 }, |
| }; |
| |
| static bool nau8810_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case NAU8810_REG_RESET ... NAU8810_REG_SMPLR: |
| case NAU8810_REG_DAC ... NAU8810_REG_DACGAIN: |
| case NAU8810_REG_ADC ... NAU8810_REG_ADCGAIN: |
| case NAU8810_REG_EQ1 ... NAU8810_REG_EQ5: |
| case NAU8810_REG_DACLIM1 ... NAU8810_REG_DACLIM2: |
| case NAU8810_REG_NOTCH1 ... NAU8810_REG_NOTCH4: |
| case NAU8810_REG_ALC1 ... NAU8810_REG_ATTEN: |
| case NAU8810_REG_INPUT_SIGNAL ... NAU8810_REG_PGAGAIN: |
| case NAU8810_REG_ADCBOOST: |
| case NAU8810_REG_OUTPUT ... NAU8810_REG_SPKMIX: |
| case NAU8810_REG_SPKGAIN: |
| case NAU8810_REG_MONOMIX: |
| case NAU8810_REG_POWER4 ... NAU8810_REG_TSLOTCTL2: |
| case NAU8810_REG_DEVICE_REVID ... NAU8810_REG_RESERVE: |
| case NAU8810_REG_OUTCTL ... NAU8810_REG_ALC1ENHAN2: |
| case NAU8810_REG_MISCCTL: |
| case NAU8810_REG_OUTTIEOFF ... NAU8810_REG_OUTTIEOFFMAN: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool nau8810_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case NAU8810_REG_RESET ... NAU8810_REG_SMPLR: |
| case NAU8810_REG_DAC ... NAU8810_REG_DACGAIN: |
| case NAU8810_REG_ADC ... NAU8810_REG_ADCGAIN: |
| case NAU8810_REG_EQ1 ... NAU8810_REG_EQ5: |
| case NAU8810_REG_DACLIM1 ... NAU8810_REG_DACLIM2: |
| case NAU8810_REG_NOTCH1 ... NAU8810_REG_NOTCH4: |
| case NAU8810_REG_ALC1 ... NAU8810_REG_ATTEN: |
| case NAU8810_REG_INPUT_SIGNAL ... NAU8810_REG_PGAGAIN: |
| case NAU8810_REG_ADCBOOST: |
| case NAU8810_REG_OUTPUT ... NAU8810_REG_SPKMIX: |
| case NAU8810_REG_SPKGAIN: |
| case NAU8810_REG_MONOMIX: |
| case NAU8810_REG_POWER4 ... NAU8810_REG_TSLOTCTL2: |
| case NAU8810_REG_OUTCTL ... NAU8810_REG_ALC1ENHAN2: |
| case NAU8810_REG_MISCCTL: |
| case NAU8810_REG_OUTTIEOFF ... NAU8810_REG_OUTTIEOFFMAN: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool nau8810_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case NAU8810_REG_RESET: |
| case NAU8810_REG_DEVICE_REVID ... NAU8810_REG_RESERVE: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /* The EQ parameters get function is to get the 5 band equalizer control. |
| * The regmap raw read can't work here because regmap doesn't provide |
| * value format for value width of 9 bits. Therefore, the driver reads data |
| * from cache and makes value format according to the endianness of |
| * bytes type control element. |
| */ |
| static int nau8810_eq_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| struct soc_bytes_ext *params = (void *)kcontrol->private_value; |
| int i, reg, reg_val; |
| u16 *val; |
| |
| val = (u16 *)ucontrol->value.bytes.data; |
| reg = NAU8810_REG_EQ1; |
| for (i = 0; i < params->max / sizeof(u16); i++) { |
| regmap_read(nau8810->regmap, reg + i, ®_val); |
| /* conversion of 16-bit integers between native CPU format |
| * and big endian format |
| */ |
| reg_val = cpu_to_be16(reg_val); |
| memcpy(val + i, ®_val, sizeof(reg_val)); |
| } |
| |
| return 0; |
| } |
| |
| /* The EQ parameters put function is to make configuration of 5 band equalizer |
| * control. These configuration includes central frequency, equalizer gain, |
| * cut-off frequency, bandwidth control, and equalizer path. |
| * The regmap raw write can't work here because regmap doesn't provide |
| * register and value format for register with address 7 bits and value 9 bits. |
| * Therefore, the driver makes value format according to the endianness of |
| * bytes type control element and writes data to codec. |
| */ |
| static int nau8810_eq_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| struct soc_bytes_ext *params = (void *)kcontrol->private_value; |
| void *data; |
| u16 *val, value; |
| int i, reg, ret; |
| |
| data = kmemdup(ucontrol->value.bytes.data, |
| params->max, GFP_KERNEL | GFP_DMA); |
| if (!data) |
| return -ENOMEM; |
| |
| val = (u16 *)data; |
| reg = NAU8810_REG_EQ1; |
| for (i = 0; i < params->max / sizeof(u16); i++) { |
| /* conversion of 16-bit integers between native CPU format |
| * and big endian format |
| */ |
| value = be16_to_cpu(*(val + i)); |
| ret = regmap_write(nau8810->regmap, reg + i, value); |
| if (ret) { |
| dev_err(component->dev, "EQ configuration fail, register: %x ret: %d\n", |
| reg + i, ret); |
| kfree(data); |
| return ret; |
| } |
| } |
| kfree(data); |
| |
| return 0; |
| } |
| |
| static const char * const nau8810_companding[] = { |
| "Off", "NC", "u-law", "A-law" }; |
| |
| static const struct soc_enum nau8810_companding_adc_enum = |
| SOC_ENUM_SINGLE(NAU8810_REG_COMP, NAU8810_ADCCM_SFT, |
| ARRAY_SIZE(nau8810_companding), nau8810_companding); |
| |
| static const struct soc_enum nau8810_companding_dac_enum = |
| SOC_ENUM_SINGLE(NAU8810_REG_COMP, NAU8810_DACCM_SFT, |
| ARRAY_SIZE(nau8810_companding), nau8810_companding); |
| |
| static const char * const nau8810_deemp[] = { |
| "None", "32kHz", "44.1kHz", "48kHz" }; |
| |
| static const struct soc_enum nau8810_deemp_enum = |
| SOC_ENUM_SINGLE(NAU8810_REG_DAC, NAU8810_DEEMP_SFT, |
| ARRAY_SIZE(nau8810_deemp), nau8810_deemp); |
| |
| static const char * const nau8810_eqmode[] = {"Capture", "Playback" }; |
| |
| static const struct soc_enum nau8810_eqmode_enum = |
| SOC_ENUM_SINGLE(NAU8810_REG_EQ1, NAU8810_EQM_SFT, |
| ARRAY_SIZE(nau8810_eqmode), nau8810_eqmode); |
| |
| static const char * const nau8810_alc[] = {"Normal", "Limiter" }; |
| |
| static const struct soc_enum nau8810_alc_enum = |
| SOC_ENUM_SINGLE(NAU8810_REG_ALC3, NAU8810_ALCM_SFT, |
| ARRAY_SIZE(nau8810_alc), nau8810_alc); |
| |
| static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1); |
| static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0); |
| static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0); |
| |
| static const struct snd_kcontrol_new nau8810_snd_controls[] = { |
| SOC_ENUM("ADC Companding", nau8810_companding_adc_enum), |
| SOC_ENUM("DAC Companding", nau8810_companding_dac_enum), |
| SOC_ENUM("DAC De-emphasis", nau8810_deemp_enum), |
| |
| SOC_ENUM("EQ Function", nau8810_eqmode_enum), |
| SND_SOC_BYTES_EXT("EQ Parameters", 10, |
| nau8810_eq_get, nau8810_eq_put), |
| |
| SOC_SINGLE("DAC Inversion Switch", NAU8810_REG_DAC, |
| NAU8810_DACPL_SFT, 1, 0), |
| SOC_SINGLE_TLV("Playback Volume", NAU8810_REG_DACGAIN, |
| NAU8810_DACGAIN_SFT, 0xff, 0, digital_tlv), |
| |
| SOC_SINGLE("High Pass Filter Switch", NAU8810_REG_ADC, |
| NAU8810_HPFEN_SFT, 1, 0), |
| SOC_SINGLE("High Pass Cut Off", NAU8810_REG_ADC, |
| NAU8810_HPF_SFT, 0x7, 0), |
| |
| SOC_SINGLE("ADC Inversion Switch", NAU8810_REG_ADC, |
| NAU8810_ADCPL_SFT, 1, 0), |
| SOC_SINGLE_TLV("Capture Volume", NAU8810_REG_ADCGAIN, |
| NAU8810_ADCGAIN_SFT, 0xff, 0, digital_tlv), |
| |
| SOC_SINGLE_TLV("EQ1 Volume", NAU8810_REG_EQ1, |
| NAU8810_EQ1GC_SFT, 0x18, 1, eq_tlv), |
| SOC_SINGLE_TLV("EQ2 Volume", NAU8810_REG_EQ2, |
| NAU8810_EQ2GC_SFT, 0x18, 1, eq_tlv), |
| SOC_SINGLE_TLV("EQ3 Volume", NAU8810_REG_EQ3, |
| NAU8810_EQ3GC_SFT, 0x18, 1, eq_tlv), |
| SOC_SINGLE_TLV("EQ4 Volume", NAU8810_REG_EQ4, |
| NAU8810_EQ4GC_SFT, 0x18, 1, eq_tlv), |
| SOC_SINGLE_TLV("EQ5 Volume", NAU8810_REG_EQ5, |
| NAU8810_EQ5GC_SFT, 0x18, 1, eq_tlv), |
| |
| SOC_SINGLE("DAC Limiter Switch", NAU8810_REG_DACLIM1, |
| NAU8810_DACLIMEN_SFT, 1, 0), |
| SOC_SINGLE("DAC Limiter Decay", NAU8810_REG_DACLIM1, |
| NAU8810_DACLIMDCY_SFT, 0xf, 0), |
| SOC_SINGLE("DAC Limiter Attack", NAU8810_REG_DACLIM1, |
| NAU8810_DACLIMATK_SFT, 0xf, 0), |
| SOC_SINGLE("DAC Limiter Threshold", NAU8810_REG_DACLIM2, |
| NAU8810_DACLIMTHL_SFT, 0x7, 0), |
| SOC_SINGLE("DAC Limiter Boost", NAU8810_REG_DACLIM2, |
| NAU8810_DACLIMBST_SFT, 0xf, 0), |
| |
| SOC_ENUM("ALC Mode", nau8810_alc_enum), |
| SOC_SINGLE("ALC Enable Switch", NAU8810_REG_ALC1, |
| NAU8810_ALCEN_SFT, 1, 0), |
| SOC_SINGLE("ALC Max Volume", NAU8810_REG_ALC1, |
| NAU8810_ALCMXGAIN_SFT, 0x7, 0), |
| SOC_SINGLE("ALC Min Volume", NAU8810_REG_ALC1, |
| NAU8810_ALCMINGAIN_SFT, 0x7, 0), |
| SOC_SINGLE("ALC ZC Switch", NAU8810_REG_ALC2, |
| NAU8810_ALCZC_SFT, 1, 0), |
| SOC_SINGLE("ALC Hold", NAU8810_REG_ALC2, |
| NAU8810_ALCHT_SFT, 0xf, 0), |
| SOC_SINGLE("ALC Target", NAU8810_REG_ALC2, |
| NAU8810_ALCSL_SFT, 0xf, 0), |
| SOC_SINGLE("ALC Decay", NAU8810_REG_ALC3, |
| NAU8810_ALCDCY_SFT, 0xf, 0), |
| SOC_SINGLE("ALC Attack", NAU8810_REG_ALC3, |
| NAU8810_ALCATK_SFT, 0xf, 0), |
| SOC_SINGLE("ALC Noise Gate Switch", NAU8810_REG_NOISEGATE, |
| NAU8810_ALCNEN_SFT, 1, 0), |
| SOC_SINGLE("ALC Noise Gate Threshold", NAU8810_REG_NOISEGATE, |
| NAU8810_ALCNTH_SFT, 0x7, 0), |
| |
| SOC_SINGLE("PGA ZC Switch", NAU8810_REG_PGAGAIN, |
| NAU8810_PGAZC_SFT, 1, 0), |
| SOC_SINGLE_TLV("PGA Volume", NAU8810_REG_PGAGAIN, |
| NAU8810_PGAGAIN_SFT, 0x3f, 0, inpga_tlv), |
| |
| SOC_SINGLE("Speaker ZC Switch", NAU8810_REG_SPKGAIN, |
| NAU8810_SPKZC_SFT, 1, 0), |
| SOC_SINGLE("Speaker Mute Switch", NAU8810_REG_SPKGAIN, |
| NAU8810_SPKMT_SFT, 1, 0), |
| SOC_SINGLE_TLV("Speaker Volume", NAU8810_REG_SPKGAIN, |
| NAU8810_SPKGAIN_SFT, 0x3f, 0, spk_tlv), |
| |
| SOC_SINGLE("Capture Boost(+20dB)", NAU8810_REG_ADCBOOST, |
| NAU8810_PGABST_SFT, 1, 0), |
| SOC_SINGLE("Mono Mute Switch", NAU8810_REG_MONOMIX, |
| NAU8810_MOUTMXMT_SFT, 1, 0), |
| |
| SOC_SINGLE("DAC Oversampling Rate(128x) Switch", NAU8810_REG_DAC, |
| NAU8810_DACOS_SFT, 1, 0), |
| SOC_SINGLE("ADC Oversampling Rate(128x) Switch", NAU8810_REG_ADC, |
| NAU8810_ADCOS_SFT, 1, 0), |
| }; |
| |
| /* Speaker Output Mixer */ |
| static const struct snd_kcontrol_new nau8810_speaker_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line Bypass Switch", NAU8810_REG_SPKMIX, |
| NAU8810_BYPSPK_SFT, 1, 0), |
| SOC_DAPM_SINGLE("PCM Playback Switch", NAU8810_REG_SPKMIX, |
| NAU8810_DACSPK_SFT, 1, 0), |
| }; |
| |
| /* Mono Output Mixer */ |
| static const struct snd_kcontrol_new nau8810_mono_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line Bypass Switch", NAU8810_REG_MONOMIX, |
| NAU8810_BYPMOUT_SFT, 1, 0), |
| SOC_DAPM_SINGLE("PCM Playback Switch", NAU8810_REG_MONOMIX, |
| NAU8810_DACMOUT_SFT, 1, 0), |
| }; |
| |
| /* PGA Mute */ |
| static const struct snd_kcontrol_new nau8810_pgaboost_mixer_controls[] = { |
| SOC_DAPM_SINGLE("PGA Mute Switch", NAU8810_REG_PGAGAIN, |
| NAU8810_PGAMT_SFT, 1, 1), |
| SOC_DAPM_SINGLE("PMIC PGA Switch", NAU8810_REG_ADCBOOST, |
| NAU8810_PMICBSTGAIN_SFT, 0x7, 0), |
| }; |
| |
| /* Input PGA */ |
| static const struct snd_kcontrol_new nau8810_inpga[] = { |
| SOC_DAPM_SINGLE("MicN Switch", NAU8810_REG_INPUT_SIGNAL, |
| NAU8810_NMICPGA_SFT, 1, 0), |
| SOC_DAPM_SINGLE("MicP Switch", NAU8810_REG_INPUT_SIGNAL, |
| NAU8810_PMICPGA_SFT, 1, 0), |
| }; |
| |
| /* Loopback Switch */ |
| static const struct snd_kcontrol_new nau8810_loopback = |
| SOC_DAPM_SINGLE("Switch", NAU8810_REG_COMP, |
| NAU8810_ADDAP_SFT, 1, 0); |
| |
| static int check_mclk_select_pll(struct snd_soc_dapm_widget *source, |
| struct snd_soc_dapm_widget *sink) |
| { |
| struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm); |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| unsigned int value; |
| |
| regmap_read(nau8810->regmap, NAU8810_REG_CLOCK, &value); |
| return (value & NAU8810_CLKM_MASK); |
| } |
| |
| static const struct snd_soc_dapm_widget nau8810_dapm_widgets[] = { |
| SND_SOC_DAPM_MIXER("Speaker Mixer", NAU8810_REG_POWER3, |
| NAU8810_SPKMX_EN_SFT, 0, &nau8810_speaker_mixer_controls[0], |
| ARRAY_SIZE(nau8810_speaker_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Mono Mixer", NAU8810_REG_POWER3, |
| NAU8810_MOUTMX_EN_SFT, 0, &nau8810_mono_mixer_controls[0], |
| ARRAY_SIZE(nau8810_mono_mixer_controls)), |
| SND_SOC_DAPM_DAC("DAC", "HiFi Playback", NAU8810_REG_POWER3, |
| NAU8810_DAC_EN_SFT, 0), |
| SND_SOC_DAPM_ADC("ADC", "HiFi Capture", NAU8810_REG_POWER2, |
| NAU8810_ADC_EN_SFT, 0), |
| SND_SOC_DAPM_PGA("SpkN Out", NAU8810_REG_POWER3, |
| NAU8810_NSPK_EN_SFT, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("SpkP Out", NAU8810_REG_POWER3, |
| NAU8810_PSPK_EN_SFT, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Mono Out", NAU8810_REG_POWER3, |
| NAU8810_MOUT_EN_SFT, 0, NULL, 0), |
| |
| SND_SOC_DAPM_MIXER("Input PGA", NAU8810_REG_POWER2, |
| NAU8810_PGA_EN_SFT, 0, nau8810_inpga, |
| ARRAY_SIZE(nau8810_inpga)), |
| SND_SOC_DAPM_MIXER("Input Boost Stage", NAU8810_REG_POWER2, |
| NAU8810_BST_EN_SFT, 0, nau8810_pgaboost_mixer_controls, |
| ARRAY_SIZE(nau8810_pgaboost_mixer_controls)), |
| |
| SND_SOC_DAPM_SUPPLY("Mic Bias", NAU8810_REG_POWER1, |
| NAU8810_MICBIAS_EN_SFT, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("PLL", NAU8810_REG_POWER1, |
| NAU8810_PLL_EN_SFT, 0, NULL, 0), |
| |
| SND_SOC_DAPM_SWITCH("Digital Loopback", SND_SOC_NOPM, 0, 0, |
| &nau8810_loopback), |
| |
| SND_SOC_DAPM_INPUT("MICN"), |
| SND_SOC_DAPM_INPUT("MICP"), |
| SND_SOC_DAPM_OUTPUT("MONOOUT"), |
| SND_SOC_DAPM_OUTPUT("SPKOUTP"), |
| SND_SOC_DAPM_OUTPUT("SPKOUTN"), |
| }; |
| |
| static const struct snd_soc_dapm_route nau8810_dapm_routes[] = { |
| {"DAC", NULL, "PLL", check_mclk_select_pll}, |
| |
| /* Mono output mixer */ |
| {"Mono Mixer", "PCM Playback Switch", "DAC"}, |
| {"Mono Mixer", "Line Bypass Switch", "Input Boost Stage"}, |
| |
| /* Speaker output mixer */ |
| {"Speaker Mixer", "PCM Playback Switch", "DAC"}, |
| {"Speaker Mixer", "Line Bypass Switch", "Input Boost Stage"}, |
| |
| /* Outputs */ |
| {"Mono Out", NULL, "Mono Mixer"}, |
| {"MONOOUT", NULL, "Mono Out"}, |
| {"SpkN Out", NULL, "Speaker Mixer"}, |
| {"SpkP Out", NULL, "Speaker Mixer"}, |
| {"SPKOUTN", NULL, "SpkN Out"}, |
| {"SPKOUTP", NULL, "SpkP Out"}, |
| |
| /* Input Boost Stage */ |
| {"ADC", NULL, "Input Boost Stage"}, |
| {"ADC", NULL, "PLL", check_mclk_select_pll}, |
| {"Input Boost Stage", "PGA Mute Switch", "Input PGA"}, |
| {"Input Boost Stage", "PMIC PGA Switch", "MICP"}, |
| |
| /* Input PGA */ |
| {"Input PGA", NULL, "Mic Bias"}, |
| {"Input PGA", "MicN Switch", "MICN"}, |
| {"Input PGA", "MicP Switch", "MICP"}, |
| |
| /* Digital Looptack */ |
| {"Digital Loopback", "Switch", "ADC"}, |
| {"DAC", NULL, "Digital Loopback"}, |
| }; |
| |
| static int nau8810_set_sysclk(struct snd_soc_dai *dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| |
| nau8810->clk_id = clk_id; |
| nau8810->sysclk = freq; |
| dev_dbg(nau8810->dev, "master sysclk %dHz, source %s\n", |
| freq, clk_id == NAU8810_SCLK_PLL ? "PLL" : "MCLK"); |
| |
| return 0; |
| } |
| |
| static int nau88l0_calc_pll(unsigned int pll_in, |
| unsigned int fs, struct nau8810_pll *pll_param) |
| { |
| u64 f2, f2_max, pll_ratio; |
| int i, scal_sel; |
| |
| if (pll_in > NAU_PLL_REF_MAX || pll_in < NAU_PLL_REF_MIN) |
| return -EINVAL; |
| |
| f2_max = 0; |
| scal_sel = ARRAY_SIZE(nau8810_mclk_scaler); |
| for (i = 0; i < ARRAY_SIZE(nau8810_mclk_scaler); i++) { |
| f2 = 256 * fs * 4 * nau8810_mclk_scaler[i] / 10; |
| if (f2 > NAU_PLL_FREQ_MIN && f2 < NAU_PLL_FREQ_MAX && |
| f2_max < f2) { |
| f2_max = f2; |
| scal_sel = i; |
| } |
| } |
| if (ARRAY_SIZE(nau8810_mclk_scaler) == scal_sel) |
| return -EINVAL; |
| pll_param->mclk_scaler = scal_sel; |
| f2 = f2_max; |
| |
| /* Calculate the PLL 4-bit integer input and the PLL 24-bit fractional |
| * input; round up the 24+4bit. |
| */ |
| pll_ratio = div_u64(f2 << 28, pll_in); |
| pll_param->pre_factor = 0; |
| if (((pll_ratio >> 28) & 0xF) < NAU_PLL_OPTOP_MIN) { |
| pll_ratio <<= 1; |
| pll_param->pre_factor = 1; |
| } |
| pll_param->pll_int = (pll_ratio >> 28) & 0xF; |
| pll_param->pll_frac = ((pll_ratio & 0xFFFFFFF) >> 4); |
| |
| return 0; |
| } |
| |
| static int nau8810_set_pll(struct snd_soc_dai *codec_dai, int pll_id, |
| int source, unsigned int freq_in, unsigned int freq_out) |
| { |
| struct snd_soc_component *component = codec_dai->component; |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| struct regmap *map = nau8810->regmap; |
| struct nau8810_pll *pll_param = &nau8810->pll; |
| int ret, fs; |
| |
| fs = freq_out / 256; |
| ret = nau88l0_calc_pll(freq_in, fs, pll_param); |
| if (ret < 0) { |
| dev_err(nau8810->dev, "Unsupported input clock %d\n", freq_in); |
| return ret; |
| } |
| dev_info(nau8810->dev, "pll_int=%x pll_frac=%x mclk_scaler=%x pre_factor=%x\n", |
| pll_param->pll_int, pll_param->pll_frac, pll_param->mclk_scaler, |
| pll_param->pre_factor); |
| |
| regmap_update_bits(map, NAU8810_REG_PLLN, |
| NAU8810_PLLMCLK_DIV2 | NAU8810_PLLN_MASK, |
| (pll_param->pre_factor ? NAU8810_PLLMCLK_DIV2 : 0) | |
| pll_param->pll_int); |
| regmap_write(map, NAU8810_REG_PLLK1, |
| (pll_param->pll_frac >> NAU8810_PLLK1_SFT) & |
| NAU8810_PLLK1_MASK); |
| regmap_write(map, NAU8810_REG_PLLK2, |
| (pll_param->pll_frac >> NAU8810_PLLK2_SFT) & |
| NAU8810_PLLK2_MASK); |
| regmap_write(map, NAU8810_REG_PLLK3, |
| pll_param->pll_frac & NAU8810_PLLK3_MASK); |
| regmap_update_bits(map, NAU8810_REG_CLOCK, NAU8810_MCLKSEL_MASK, |
| pll_param->mclk_scaler << NAU8810_MCLKSEL_SFT); |
| regmap_update_bits(map, NAU8810_REG_CLOCK, |
| NAU8810_CLKM_MASK, NAU8810_CLKM_PLL); |
| |
| return 0; |
| } |
| |
| static int nau8810_set_dai_fmt(struct snd_soc_dai *codec_dai, |
| unsigned int fmt) |
| { |
| struct snd_soc_component *component = codec_dai->component; |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| u16 ctrl1_val = 0, ctrl2_val = 0; |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| ctrl2_val |= NAU8810_CLKIO_MASTER; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| ctrl1_val |= NAU8810_AIFMT_I2S; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| ctrl1_val |= NAU8810_AIFMT_LEFT; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| ctrl1_val |= NAU8810_AIFMT_PCM_A; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| ctrl1_val |= NAU8810_BCLKP_IB | NAU8810_FSP_IF; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| ctrl1_val |= NAU8810_BCLKP_IB; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| ctrl1_val |= NAU8810_FSP_IF; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_update_bits(nau8810->regmap, NAU8810_REG_IFACE, |
| NAU8810_AIFMT_MASK | NAU8810_FSP_IF | |
| NAU8810_BCLKP_IB, ctrl1_val); |
| regmap_update_bits(nau8810->regmap, NAU8810_REG_CLOCK, |
| NAU8810_CLKIO_MASK, ctrl2_val); |
| |
| return 0; |
| } |
| |
| static int nau8810_mclk_clkdiv(struct nau8810 *nau8810, int rate) |
| { |
| int i, sclk, imclk = rate * 256, div = 0; |
| |
| if (!nau8810->sysclk) { |
| dev_err(nau8810->dev, "Make mclk div configuration fail because of invalid system clock\n"); |
| return -EINVAL; |
| } |
| |
| /* Configure the master clock prescaler div to make system |
| * clock to approximate the internal master clock (IMCLK); |
| * and large or equal to IMCLK. |
| */ |
| for (i = 1; i < ARRAY_SIZE(nau8810_mclk_scaler); i++) { |
| sclk = (nau8810->sysclk * 10) / |
| nau8810_mclk_scaler[i]; |
| if (sclk < imclk) |
| break; |
| div = i; |
| } |
| dev_dbg(nau8810->dev, |
| "master clock prescaler %x for fs %d\n", div, rate); |
| |
| /* master clock from MCLK and disable PLL */ |
| regmap_update_bits(nau8810->regmap, NAU8810_REG_CLOCK, |
| NAU8810_MCLKSEL_MASK, (div << NAU8810_MCLKSEL_SFT)); |
| regmap_update_bits(nau8810->regmap, NAU8810_REG_CLOCK, |
| NAU8810_CLKM_MASK, NAU8810_CLKM_MCLK); |
| |
| return 0; |
| } |
| |
| static int nau8810_pcm_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| int val_len = 0, val_rate = 0, ret = 0; |
| |
| switch (params_width(params)) { |
| case 16: |
| break; |
| case 20: |
| val_len |= NAU8810_WLEN_20; |
| break; |
| case 24: |
| val_len |= NAU8810_WLEN_24; |
| break; |
| case 32: |
| val_len |= NAU8810_WLEN_32; |
| break; |
| } |
| |
| switch (params_rate(params)) { |
| case 8000: |
| val_rate |= NAU8810_SMPLR_8K; |
| break; |
| case 11025: |
| val_rate |= NAU8810_SMPLR_12K; |
| break; |
| case 16000: |
| val_rate |= NAU8810_SMPLR_16K; |
| break; |
| case 22050: |
| val_rate |= NAU8810_SMPLR_24K; |
| break; |
| case 32000: |
| val_rate |= NAU8810_SMPLR_32K; |
| break; |
| case 44100: |
| case 48000: |
| break; |
| } |
| |
| regmap_update_bits(nau8810->regmap, NAU8810_REG_IFACE, |
| NAU8810_WLEN_MASK, val_len); |
| regmap_update_bits(nau8810->regmap, NAU8810_REG_SMPLR, |
| NAU8810_SMPLR_MASK, val_rate); |
| |
| /* If the master clock is from MCLK, provide the runtime FS for driver |
| * to get the master clock prescaler configuration. |
| */ |
| if (nau8810->clk_id == NAU8810_SCLK_MCLK) { |
| ret = nau8810_mclk_clkdiv(nau8810, params_rate(params)); |
| if (ret < 0) |
| dev_err(nau8810->dev, "MCLK div configuration fail\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int nau8810_set_bias_level(struct snd_soc_component *component, |
| enum snd_soc_bias_level level) |
| { |
| struct nau8810 *nau8810 = snd_soc_component_get_drvdata(component); |
| struct regmap *map = nau8810->regmap; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| case SND_SOC_BIAS_PREPARE: |
| regmap_update_bits(map, NAU8810_REG_POWER1, |
| NAU8810_REFIMP_MASK, NAU8810_REFIMP_80K); |
| break; |
| |
| case SND_SOC_BIAS_STANDBY: |
| regmap_update_bits(map, NAU8810_REG_POWER1, |
| NAU8810_IOBUF_EN | NAU8810_ABIAS_EN, |
| NAU8810_IOBUF_EN | NAU8810_ABIAS_EN); |
| |
| if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { |
| regcache_sync(map); |
| regmap_update_bits(map, NAU8810_REG_POWER1, |
| NAU8810_REFIMP_MASK, NAU8810_REFIMP_3K); |
| mdelay(100); |
| } |
| regmap_update_bits(map, NAU8810_REG_POWER1, |
| NAU8810_REFIMP_MASK, NAU8810_REFIMP_300K); |
| break; |
| |
| case SND_SOC_BIAS_OFF: |
| regmap_write(map, NAU8810_REG_POWER1, 0); |
| regmap_write(map, NAU8810_REG_POWER2, 0); |
| regmap_write(map, NAU8810_REG_POWER3, 0); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| |
| #define NAU8810_RATES (SNDRV_PCM_RATE_8000_48000) |
| |
| #define NAU8810_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static const struct snd_soc_dai_ops nau8810_ops = { |
| .hw_params = nau8810_pcm_hw_params, |
| .set_fmt = nau8810_set_dai_fmt, |
| .set_sysclk = nau8810_set_sysclk, |
| .set_pll = nau8810_set_pll, |
| }; |
| |
| static struct snd_soc_dai_driver nau8810_dai = { |
| .name = "nau8810-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 1, |
| .channels_max = 2, /* Only 1 channel of data */ |
| .rates = NAU8810_RATES, |
| .formats = NAU8810_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 1, |
| .channels_max = 2, /* Only 1 channel of data */ |
| .rates = NAU8810_RATES, |
| .formats = NAU8810_FORMATS, |
| }, |
| .ops = &nau8810_ops, |
| .symmetric_rates = 1, |
| }; |
| |
| static const struct regmap_config nau8810_regmap_config = { |
| .reg_bits = 7, |
| .val_bits = 9, |
| |
| .max_register = NAU8810_REG_MAX, |
| .readable_reg = nau8810_readable_reg, |
| .writeable_reg = nau8810_writeable_reg, |
| .volatile_reg = nau8810_volatile_reg, |
| |
| .cache_type = REGCACHE_RBTREE, |
| .reg_defaults = nau8810_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(nau8810_reg_defaults), |
| }; |
| |
| static const struct snd_soc_component_driver nau8810_component_driver = { |
| .set_bias_level = nau8810_set_bias_level, |
| .controls = nau8810_snd_controls, |
| .num_controls = ARRAY_SIZE(nau8810_snd_controls), |
| .dapm_widgets = nau8810_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(nau8810_dapm_widgets), |
| .dapm_routes = nau8810_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(nau8810_dapm_routes), |
| .suspend_bias_off = 1, |
| .idle_bias_on = 1, |
| .use_pmdown_time = 1, |
| .endianness = 1, |
| .non_legacy_dai_naming = 1, |
| }; |
| |
| static int nau8810_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &i2c->dev; |
| struct nau8810 *nau8810 = dev_get_platdata(dev); |
| |
| if (!nau8810) { |
| nau8810 = devm_kzalloc(dev, sizeof(*nau8810), GFP_KERNEL); |
| if (!nau8810) |
| return -ENOMEM; |
| } |
| i2c_set_clientdata(i2c, nau8810); |
| |
| nau8810->regmap = devm_regmap_init_i2c(i2c, &nau8810_regmap_config); |
| if (IS_ERR(nau8810->regmap)) |
| return PTR_ERR(nau8810->regmap); |
| nau8810->dev = dev; |
| |
| regmap_write(nau8810->regmap, NAU8810_REG_RESET, 0x00); |
| |
| return devm_snd_soc_register_component(dev, |
| &nau8810_component_driver, &nau8810_dai, 1); |
| } |
| |
| static const struct i2c_device_id nau8810_i2c_id[] = { |
| { "nau8810", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id nau8810_of_match[] = { |
| { .compatible = "nuvoton,nau8810", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, nau8810_of_match); |
| #endif |
| |
| static struct i2c_driver nau8810_i2c_driver = { |
| .driver = { |
| .name = "nau8810", |
| .of_match_table = of_match_ptr(nau8810_of_match), |
| }, |
| .probe = nau8810_i2c_probe, |
| .id_table = nau8810_i2c_id, |
| }; |
| |
| module_i2c_driver(nau8810_i2c_driver); |
| |
| MODULE_DESCRIPTION("ASoC NAU8810 driver"); |
| MODULE_AUTHOR("David Lin <ctlin0@nuvoton.com>"); |
| MODULE_LICENSE("GPL v2"); |