| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * James P. Ketrenos <ipw2100-admin@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| /* |
| * Please use this file (iwl-3945.h) for driver implementation definitions. |
| * Please use iwl-3945-commands.h for uCode API definitions. |
| * Please use iwl-3945-hw.h for hardware-related definitions. |
| */ |
| |
| #ifndef __iwl_3945_h__ |
| #define __iwl_3945_h__ |
| |
| #include <linux/pci.h> /* for struct pci_device_id */ |
| #include <linux/kernel.h> |
| #include <net/ieee80211_radiotap.h> |
| |
| /*used for rfkill*/ |
| #include <linux/rfkill.h> |
| #include <linux/input.h> |
| |
| /* Hardware specific file defines the PCI IDs table for that hardware module */ |
| extern struct pci_device_id iwl3945_hw_card_ids[]; |
| |
| #define DRV_NAME "iwl3945" |
| #include "iwl-csr.h" |
| #include "iwl-prph.h" |
| #include "iwl-3945-hw.h" |
| #include "iwl-3945-debug.h" |
| #include "iwl-3945-led.h" |
| |
| /* Change firmware file name, using "-" and incrementing number, |
| * *only* when uCode interface or architecture changes so that it |
| * is not compatible with earlier drivers. |
| * This number will also appear in << 8 position of 1st dword of uCode file */ |
| #define IWL3945_UCODE_API "-1" |
| |
| /* Default noise level to report when noise measurement is not available. |
| * This may be because we're: |
| * 1) Not associated (4965, no beacon statistics being sent to driver) |
| * 2) Scanning (noise measurement does not apply to associated channel) |
| * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) |
| * Use default noise value of -127 ... this is below the range of measurable |
| * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. |
| * Also, -127 works better than 0 when averaging frames with/without |
| * noise info (e.g. averaging might be done in app); measured dBm values are |
| * always negative ... using a negative value as the default keeps all |
| * averages within an s8's (used in some apps) range of negative values. */ |
| #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) |
| |
| /* Module parameters accessible from iwl-*.c */ |
| extern int iwl3945_param_hwcrypto; |
| extern int iwl3945_param_queues_num; |
| |
| struct iwl3945_sta_priv { |
| struct iwl3945_rs_sta *rs_sta; |
| }; |
| |
| enum iwl3945_antenna { |
| IWL_ANTENNA_DIVERSITY, |
| IWL_ANTENNA_MAIN, |
| IWL_ANTENNA_AUX |
| }; |
| |
| /* |
| * RTS threshold here is total size [2347] minus 4 FCS bytes |
| * Per spec: |
| * a value of 0 means RTS on all data/management packets |
| * a value > max MSDU size means no RTS |
| * else RTS for data/management frames where MPDU is larger |
| * than RTS value. |
| */ |
| #define IWL_RX_BUF_SIZE 3000U |
| #define DEFAULT_RTS_THRESHOLD 2347U |
| #define MIN_RTS_THRESHOLD 0U |
| #define MAX_RTS_THRESHOLD 2347U |
| #define MAX_MSDU_SIZE 2304U |
| #define MAX_MPDU_SIZE 2346U |
| #define DEFAULT_BEACON_INTERVAL 100U |
| #define DEFAULT_SHORT_RETRY_LIMIT 7U |
| #define DEFAULT_LONG_RETRY_LIMIT 4U |
| |
| struct iwl3945_rx_mem_buffer { |
| dma_addr_t dma_addr; |
| struct sk_buff *skb; |
| struct list_head list; |
| }; |
| |
| /* |
| * Generic queue structure |
| * |
| * Contains common data for Rx and Tx queues |
| */ |
| struct iwl3945_queue { |
| int n_bd; /* number of BDs in this queue */ |
| int write_ptr; /* 1-st empty entry (index) host_w*/ |
| int read_ptr; /* last used entry (index) host_r*/ |
| dma_addr_t dma_addr; /* physical addr for BD's */ |
| int n_window; /* safe queue window */ |
| u32 id; |
| int low_mark; /* low watermark, resume queue if free |
| * space more than this */ |
| int high_mark; /* high watermark, stop queue if free |
| * space less than this */ |
| } __attribute__ ((packed)); |
| |
| int iwl3945_queue_space(const struct iwl3945_queue *q); |
| int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i); |
| |
| #define MAX_NUM_OF_TBS (20) |
| |
| /* One for each TFD */ |
| struct iwl3945_tx_info { |
| struct sk_buff *skb[MAX_NUM_OF_TBS]; |
| }; |
| |
| /** |
| * struct iwl3945_tx_queue - Tx Queue for DMA |
| * @q: generic Rx/Tx queue descriptor |
| * @bd: base of circular buffer of TFDs |
| * @cmd: array of command/Tx buffers |
| * @dma_addr_cmd: physical address of cmd/tx buffer array |
| * @txb: array of per-TFD driver data |
| * @need_update: indicates need to update read/write index |
| * |
| * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame |
| * descriptors) and required locking structures. |
| */ |
| struct iwl3945_tx_queue { |
| struct iwl3945_queue q; |
| struct iwl3945_tfd_frame *bd; |
| struct iwl3945_cmd *cmd; |
| dma_addr_t dma_addr_cmd; |
| struct iwl3945_tx_info *txb; |
| int need_update; |
| int active; |
| }; |
| |
| #define IWL_NUM_SCAN_RATES (2) |
| |
| struct iwl3945_channel_tgd_info { |
| u8 type; |
| s8 max_power; |
| }; |
| |
| struct iwl3945_channel_tgh_info { |
| s64 last_radar_time; |
| }; |
| |
| /* current Tx power values to use, one for each rate for each channel. |
| * requested power is limited by: |
| * -- regulatory EEPROM limits for this channel |
| * -- hardware capabilities (clip-powers) |
| * -- spectrum management |
| * -- user preference (e.g. iwconfig) |
| * when requested power is set, base power index must also be set. */ |
| struct iwl3945_channel_power_info { |
| struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ |
| s8 power_table_index; /* actual (compenst'd) index into gain table */ |
| s8 base_power_index; /* gain index for power at factory temp. */ |
| s8 requested_power; /* power (dBm) requested for this chnl/rate */ |
| }; |
| |
| /* current scan Tx power values to use, one for each scan rate for each |
| * channel. */ |
| struct iwl3945_scan_power_info { |
| struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ |
| s8 power_table_index; /* actual (compenst'd) index into gain table */ |
| s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ |
| }; |
| |
| /* |
| * One for each channel, holds all channel setup data |
| * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant |
| * with one another! |
| */ |
| #define IWL4965_MAX_RATE (33) |
| |
| struct iwl3945_channel_info { |
| struct iwl3945_channel_tgd_info tgd; |
| struct iwl3945_channel_tgh_info tgh; |
| struct iwl3945_eeprom_channel eeprom; /* EEPROM regulatory limit */ |
| struct iwl3945_eeprom_channel fat_eeprom; /* EEPROM regulatory limit for |
| * FAT channel */ |
| |
| u8 channel; /* channel number */ |
| u8 flags; /* flags copied from EEPROM */ |
| s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ |
| s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */ |
| s8 min_power; /* always 0 */ |
| s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ |
| |
| u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ |
| u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ |
| enum ieee80211_band band; |
| |
| /* Radio/DSP gain settings for each "normal" data Tx rate. |
| * These include, in addition to RF and DSP gain, a few fields for |
| * remembering/modifying gain settings (indexes). */ |
| struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE]; |
| |
| /* Radio/DSP gain settings for each scan rate, for directed scans. */ |
| struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; |
| }; |
| |
| struct iwl3945_clip_group { |
| /* maximum power level to prevent clipping for each rate, derived by |
| * us from this band's saturation power in EEPROM */ |
| const s8 clip_powers[IWL_MAX_RATES]; |
| }; |
| |
| #include "iwl-3945-rs.h" |
| |
| #define IWL_TX_FIFO_AC0 0 |
| #define IWL_TX_FIFO_AC1 1 |
| #define IWL_TX_FIFO_AC2 2 |
| #define IWL_TX_FIFO_AC3 3 |
| #define IWL_TX_FIFO_HCCA_1 5 |
| #define IWL_TX_FIFO_HCCA_2 6 |
| #define IWL_TX_FIFO_NONE 7 |
| |
| /* Minimum number of queues. MAX_NUM is defined in hw specific files */ |
| #define IWL_MIN_NUM_QUEUES 4 |
| |
| /* Power management (not Tx power) structures */ |
| |
| struct iwl3945_power_vec_entry { |
| struct iwl3945_powertable_cmd cmd; |
| u8 no_dtim; |
| }; |
| #define IWL_POWER_RANGE_0 (0) |
| #define IWL_POWER_RANGE_1 (1) |
| |
| #define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ |
| #define IWL_POWER_INDEX_3 0x03 |
| #define IWL_POWER_INDEX_5 0x05 |
| #define IWL_POWER_AC 0x06 |
| #define IWL_POWER_BATTERY 0x07 |
| #define IWL_POWER_LIMIT 0x07 |
| #define IWL_POWER_MASK 0x0F |
| #define IWL_POWER_ENABLED 0x10 |
| #define IWL_POWER_LEVEL(x) ((x) & IWL_POWER_MASK) |
| |
| struct iwl3945_power_mgr { |
| spinlock_t lock; |
| struct iwl3945_power_vec_entry pwr_range_0[IWL_POWER_AC]; |
| struct iwl3945_power_vec_entry pwr_range_1[IWL_POWER_AC]; |
| u8 active_index; |
| u32 dtim_val; |
| }; |
| |
| #define IEEE80211_DATA_LEN 2304 |
| #define IEEE80211_4ADDR_LEN 30 |
| #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) |
| #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) |
| |
| struct iwl3945_frame { |
| union { |
| struct ieee80211_hdr frame; |
| struct iwl3945_tx_beacon_cmd beacon; |
| u8 raw[IEEE80211_FRAME_LEN]; |
| u8 cmd[360]; |
| } u; |
| struct list_head list; |
| }; |
| |
| #define SEQ_TO_QUEUE(x) ((x >> 8) & 0xbf) |
| #define QUEUE_TO_SEQ(x) ((x & 0xbf) << 8) |
| #define SEQ_TO_INDEX(x) ((u8)(x & 0xff)) |
| #define INDEX_TO_SEQ(x) ((u8)(x & 0xff)) |
| #define SEQ_HUGE_FRAME (0x4000) |
| #define SEQ_RX_FRAME __constant_cpu_to_le16(0x8000) |
| #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) |
| #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) |
| #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) |
| |
| enum { |
| /* CMD_SIZE_NORMAL = 0, */ |
| CMD_SIZE_HUGE = (1 << 0), |
| /* CMD_SYNC = 0, */ |
| CMD_ASYNC = (1 << 1), |
| /* CMD_NO_SKB = 0, */ |
| CMD_WANT_SKB = (1 << 2), |
| }; |
| |
| struct iwl3945_cmd; |
| struct iwl3945_priv; |
| |
| struct iwl3945_cmd_meta { |
| struct iwl3945_cmd_meta *source; |
| union { |
| struct sk_buff *skb; |
| int (*callback)(struct iwl3945_priv *priv, |
| struct iwl3945_cmd *cmd, struct sk_buff *skb); |
| } __attribute__ ((packed)) u; |
| |
| /* The CMD_SIZE_HUGE flag bit indicates that the command |
| * structure is stored at the end of the shared queue memory. */ |
| u32 flags; |
| |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct iwl3945_cmd |
| * |
| * For allocation of the command and tx queues, this establishes the overall |
| * size of the largest command we send to uCode, except for a scan command |
| * (which is relatively huge; space is allocated separately). |
| */ |
| struct iwl3945_cmd { |
| struct iwl3945_cmd_meta meta; |
| struct iwl3945_cmd_header hdr; |
| union { |
| struct iwl3945_addsta_cmd addsta; |
| struct iwl3945_led_cmd led; |
| u32 flags; |
| u8 val8; |
| u16 val16; |
| u32 val32; |
| struct iwl3945_bt_cmd bt; |
| struct iwl3945_rxon_time_cmd rxon_time; |
| struct iwl3945_powertable_cmd powertable; |
| struct iwl3945_qosparam_cmd qosparam; |
| struct iwl3945_tx_cmd tx; |
| struct iwl3945_tx_beacon_cmd tx_beacon; |
| struct iwl3945_rxon_assoc_cmd rxon_assoc; |
| u8 *indirect; |
| u8 payload[360]; |
| } __attribute__ ((packed)) cmd; |
| } __attribute__ ((packed)); |
| |
| struct iwl3945_host_cmd { |
| u8 id; |
| u16 len; |
| struct iwl3945_cmd_meta meta; |
| const void *data; |
| }; |
| |
| #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl3945_cmd) - \ |
| sizeof(struct iwl3945_cmd_meta)) |
| |
| /* |
| * RX related structures and functions |
| */ |
| #define RX_FREE_BUFFERS 64 |
| #define RX_LOW_WATERMARK 8 |
| |
| #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 |
| #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 |
| #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 |
| |
| /** |
| * struct iwl3945_rx_queue - Rx queue |
| * @processed: Internal index to last handled Rx packet |
| * @read: Shared index to newest available Rx buffer |
| * @write: Shared index to oldest written Rx packet |
| * @free_count: Number of pre-allocated buffers in rx_free |
| * @rx_free: list of free SKBs for use |
| * @rx_used: List of Rx buffers with no SKB |
| * @need_update: flag to indicate we need to update read/write index |
| * |
| * NOTE: rx_free and rx_used are used as a FIFO for iwl3945_rx_mem_buffers |
| */ |
| struct iwl3945_rx_queue { |
| __le32 *bd; |
| dma_addr_t dma_addr; |
| struct iwl3945_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; |
| struct iwl3945_rx_mem_buffer *queue[RX_QUEUE_SIZE]; |
| u32 processed; |
| u32 read; |
| u32 write; |
| u32 free_count; |
| struct list_head rx_free; |
| struct list_head rx_used; |
| int need_update; |
| spinlock_t lock; |
| }; |
| |
| #define IWL_SUPPORTED_RATES_IE_LEN 8 |
| |
| #define SCAN_INTERVAL 100 |
| |
| #define MAX_A_CHANNELS 252 |
| #define MIN_A_CHANNELS 7 |
| |
| #define MAX_B_CHANNELS 14 |
| #define MIN_B_CHANNELS 1 |
| |
| #define STATUS_HCMD_ACTIVE 0 /* host command in progress */ |
| #define STATUS_HCMD_SYNC_ACTIVE 1 /* sync host command in progress */ |
| #define STATUS_INT_ENABLED 2 |
| #define STATUS_RF_KILL_HW 3 |
| #define STATUS_RF_KILL_SW 4 |
| #define STATUS_INIT 5 |
| #define STATUS_ALIVE 6 |
| #define STATUS_READY 7 |
| #define STATUS_TEMPERATURE 8 |
| #define STATUS_GEO_CONFIGURED 9 |
| #define STATUS_EXIT_PENDING 10 |
| #define STATUS_IN_SUSPEND 11 |
| #define STATUS_STATISTICS 12 |
| #define STATUS_SCANNING 13 |
| #define STATUS_SCAN_ABORTING 14 |
| #define STATUS_SCAN_HW 15 |
| #define STATUS_POWER_PMI 16 |
| #define STATUS_FW_ERROR 17 |
| #define STATUS_CONF_PENDING 18 |
| |
| #define MAX_TID_COUNT 9 |
| |
| #define IWL_INVALID_RATE 0xFF |
| #define IWL_INVALID_VALUE -1 |
| |
| struct iwl3945_tid_data { |
| u16 seq_number; |
| }; |
| |
| struct iwl3945_hw_key { |
| enum ieee80211_key_alg alg; |
| int keylen; |
| u8 key[32]; |
| }; |
| |
| union iwl3945_ht_rate_supp { |
| u16 rates; |
| struct { |
| u8 siso_rate; |
| u8 mimo_rate; |
| }; |
| }; |
| |
| union iwl3945_qos_capabity { |
| struct { |
| u8 edca_count:4; /* bit 0-3 */ |
| u8 q_ack:1; /* bit 4 */ |
| u8 queue_request:1; /* bit 5 */ |
| u8 txop_request:1; /* bit 6 */ |
| u8 reserved:1; /* bit 7 */ |
| } q_AP; |
| struct { |
| u8 acvo_APSD:1; /* bit 0 */ |
| u8 acvi_APSD:1; /* bit 1 */ |
| u8 ac_bk_APSD:1; /* bit 2 */ |
| u8 ac_be_APSD:1; /* bit 3 */ |
| u8 q_ack:1; /* bit 4 */ |
| u8 max_len:2; /* bit 5-6 */ |
| u8 more_data_ack:1; /* bit 7 */ |
| } q_STA; |
| u8 val; |
| }; |
| |
| /* QoS structures */ |
| struct iwl3945_qos_info { |
| int qos_enable; |
| int qos_active; |
| union iwl3945_qos_capabity qos_cap; |
| struct iwl3945_qosparam_cmd def_qos_parm; |
| }; |
| |
| #define STA_PS_STATUS_WAKE 0 |
| #define STA_PS_STATUS_SLEEP 1 |
| |
| struct iwl3945_station_entry { |
| struct iwl3945_addsta_cmd sta; |
| struct iwl3945_tid_data tid[MAX_TID_COUNT]; |
| union { |
| struct { |
| u8 rate; |
| u8 flags; |
| } s; |
| u16 rate_n_flags; |
| } current_rate; |
| u8 used; |
| u8 ps_status; |
| struct iwl3945_hw_key keyinfo; |
| }; |
| |
| /* one for each uCode image (inst/data, boot/init/runtime) */ |
| struct fw_desc { |
| void *v_addr; /* access by driver */ |
| dma_addr_t p_addr; /* access by card's busmaster DMA */ |
| u32 len; /* bytes */ |
| }; |
| |
| /* uCode file layout */ |
| struct iwl3945_ucode { |
| __le32 ver; /* major/minor/subminor */ |
| __le32 inst_size; /* bytes of runtime instructions */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of initialization instructions */ |
| __le32 init_data_size; /* bytes of initialization data */ |
| __le32 boot_size; /* bytes of bootstrap instructions */ |
| u8 data[0]; /* data in same order as "size" elements */ |
| }; |
| |
| struct iwl3945_ibss_seq { |
| u8 mac[ETH_ALEN]; |
| u16 seq_num; |
| u16 frag_num; |
| unsigned long packet_time; |
| struct list_head list; |
| }; |
| |
| /** |
| * struct iwl3945_driver_hw_info |
| * @max_txq_num: Max # Tx queues supported |
| * @tx_cmd_len: Size of Tx command (but not including frame itself) |
| * @tx_ant_num: Number of TX antennas |
| * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) |
| * @rx_buf_size: |
| * @max_pkt_size: |
| * @max_rxq_log: Log-base-2 of max_rxq_size |
| * @max_stations: |
| * @bcast_sta_id: |
| * @shared_virt: Pointer to driver/uCode shared Tx Byte Counts and Rx status |
| * @shared_phys: Physical Pointer to Tx Byte Counts and Rx status |
| */ |
| struct iwl3945_driver_hw_info { |
| u16 max_txq_num; |
| u16 tx_cmd_len; |
| u16 tx_ant_num; |
| u16 max_rxq_size; |
| u32 rx_buf_size; |
| u32 max_pkt_size; |
| u16 max_rxq_log; |
| u8 max_stations; |
| u8 bcast_sta_id; |
| void *shared_virt; |
| dma_addr_t shared_phys; |
| }; |
| |
| #define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\ |
| x->u.rx_frame.stats.payload + \ |
| x->u.rx_frame.stats.phy_count)) |
| #define IWL_RX_END(x) ((struct iwl3945_rx_frame_end *)(\ |
| IWL_RX_HDR(x)->payload + \ |
| le16_to_cpu(IWL_RX_HDR(x)->len))) |
| #define IWL_RX_STATS(x) (&x->u.rx_frame.stats) |
| #define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload) |
| |
| |
| /****************************************************************************** |
| * |
| * Functions implemented in iwl-base.c which are forward declared here |
| * for use by iwl-*.c |
| * |
| *****************************************************************************/ |
| struct iwl3945_addsta_cmd; |
| extern int iwl3945_send_add_station(struct iwl3945_priv *priv, |
| struct iwl3945_addsta_cmd *sta, u8 flags); |
| extern u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *bssid, |
| int is_ap, u8 flags); |
| extern int iwl3945_power_init_handle(struct iwl3945_priv *priv); |
| extern int iwl3945_eeprom_init(struct iwl3945_priv *priv); |
| extern int iwl3945_rx_queue_alloc(struct iwl3945_priv *priv); |
| extern void iwl3945_rx_queue_reset(struct iwl3945_priv *priv, |
| struct iwl3945_rx_queue *rxq); |
| extern int iwl3945_calc_db_from_ratio(int sig_ratio); |
| extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); |
| extern int iwl3945_tx_queue_init(struct iwl3945_priv *priv, |
| struct iwl3945_tx_queue *txq, int count, u32 id); |
| extern void iwl3945_rx_replenish(void *data); |
| extern void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq); |
| extern int iwl3945_send_cmd_pdu(struct iwl3945_priv *priv, u8 id, u16 len, |
| const void *data); |
| extern int __must_check iwl3945_send_cmd(struct iwl3945_priv *priv, |
| struct iwl3945_host_cmd *cmd); |
| extern unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv, |
| struct ieee80211_hdr *hdr, |
| const u8 *dest, int left); |
| extern int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, |
| struct iwl3945_rx_queue *q); |
| extern int iwl3945_send_statistics_request(struct iwl3945_priv *priv); |
| extern void iwl3945_set_decrypted_flag(struct iwl3945_priv *priv, struct sk_buff *skb, |
| u32 decrypt_res, |
| struct ieee80211_rx_status *stats); |
| extern const u8 iwl3945_broadcast_addr[ETH_ALEN]; |
| |
| /* |
| * Currently used by iwl-3945-rs... look at restructuring so that it doesn't |
| * call this... todo... fix that. |
| */ |
| extern u8 iwl3945_sync_station(struct iwl3945_priv *priv, int sta_id, |
| u16 tx_rate, u8 flags); |
| |
| /****************************************************************************** |
| * |
| * Functions implemented in iwl-[34]*.c which are forward declared here |
| * for use by iwl-base.c |
| * |
| * NOTE: The implementation of these functions are hardware specific |
| * which is why they are in the hardware specific files (vs. iwl-base.c) |
| * |
| * Naming convention -- |
| * iwl3945_ <-- Its part of iwlwifi (should be changed to iwl3945_) |
| * iwl3945_hw_ <-- Hardware specific (implemented in iwl-XXXX.c by all HW) |
| * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) |
| * iwl3945_bg_ <-- Called from work queue context |
| * iwl3945_mac_ <-- mac80211 callback |
| * |
| ****************************************************************************/ |
| extern void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv); |
| extern void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv); |
| extern void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_nic_init(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv); |
| extern void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv); |
| extern void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_nic_reset(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *tfd, |
| dma_addr_t addr, u16 len); |
| extern int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq); |
| extern int iwl3945_hw_get_temperature(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, |
| struct iwl3945_tx_queue *txq); |
| extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, |
| struct iwl3945_frame *frame, u8 rate); |
| extern int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv); |
| extern void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv, |
| struct iwl3945_cmd *cmd, |
| struct ieee80211_tx_info *info, |
| struct ieee80211_hdr *hdr, |
| int sta_id, int tx_id); |
| extern int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv); |
| extern int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power); |
| extern void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, |
| struct iwl3945_rx_mem_buffer *rxb); |
| extern void iwl3945_disable_events(struct iwl3945_priv *priv); |
| extern int iwl4965_get_temperature(const struct iwl3945_priv *priv); |
| |
| /** |
| * iwl3945_hw_find_station - Find station id for a given BSSID |
| * @bssid: MAC address of station ID to find |
| * |
| * NOTE: This should not be hardware specific but the code has |
| * not yet been merged into a single common layer for managing the |
| * station tables. |
| */ |
| extern u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *bssid); |
| |
| extern int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel); |
| |
| /* |
| * Forward declare iwl-3945.c functions for iwl-base.c |
| */ |
| extern __le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv); |
| extern int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv); |
| extern void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv); |
| extern int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv); |
| extern u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, |
| u16 tx_rate, u8 flags); |
| |
| |
| #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT |
| |
| enum { |
| MEASUREMENT_READY = (1 << 0), |
| MEASUREMENT_ACTIVE = (1 << 1), |
| }; |
| |
| #endif |
| |
| #ifdef CONFIG_IWL3945_RFKILL |
| struct iwl3945_priv; |
| |
| void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv); |
| void iwl3945_rfkill_unregister(struct iwl3945_priv *priv); |
| int iwl3945_rfkill_init(struct iwl3945_priv *priv); |
| #else |
| static inline void iwl3945_rfkill_set_hw_state(struct iwl3945_priv *priv) {} |
| static inline void iwl3945_rfkill_unregister(struct iwl3945_priv *priv) {} |
| static inline int iwl3945_rfkill_init(struct iwl3945_priv *priv) { return 0; } |
| #endif |
| |
| #define IWL_MAX_NUM_QUEUES IWL39_MAX_NUM_QUEUES |
| |
| struct iwl3945_priv { |
| |
| /* ieee device used by generic ieee processing code */ |
| struct ieee80211_hw *hw; |
| struct ieee80211_channel *ieee_channels; |
| struct ieee80211_rate *ieee_rates; |
| struct iwl_3945_cfg *cfg; /* device configuration */ |
| |
| /* temporary frame storage list */ |
| struct list_head free_frames; |
| int frames_count; |
| |
| enum ieee80211_band band; |
| int alloc_rxb_skb; |
| |
| void (*rx_handlers[REPLY_MAX])(struct iwl3945_priv *priv, |
| struct iwl3945_rx_mem_buffer *rxb); |
| |
| struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; |
| |
| #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT |
| /* spectrum measurement report caching */ |
| struct iwl3945_spectrum_notification measure_report; |
| u8 measurement_status; |
| #endif |
| /* ucode beacon time */ |
| u32 ucode_beacon_time; |
| |
| /* we allocate array of iwl3945_channel_info for NIC's valid channels. |
| * Access via channel # using indirect index array */ |
| struct iwl3945_channel_info *channel_info; /* channel info array */ |
| u8 channel_count; /* # of channels */ |
| |
| /* each calibration channel group in the EEPROM has a derived |
| * clip setting for each rate. */ |
| const struct iwl3945_clip_group clip_groups[5]; |
| |
| /* thermal calibration */ |
| s32 temperature; /* degrees Kelvin */ |
| s32 last_temperature; |
| |
| /* Scan related variables */ |
| unsigned long last_scan_jiffies; |
| unsigned long next_scan_jiffies; |
| unsigned long scan_start; |
| unsigned long scan_pass_start; |
| unsigned long scan_start_tsf; |
| int scan_bands; |
| int one_direct_scan; |
| u8 direct_ssid_len; |
| u8 direct_ssid[IW_ESSID_MAX_SIZE]; |
| struct iwl3945_scan_cmd *scan; |
| |
| /* spinlock */ |
| spinlock_t lock; /* protect general shared data */ |
| spinlock_t hcmd_lock; /* protect hcmd */ |
| struct mutex mutex; |
| |
| /* basic pci-network driver stuff */ |
| struct pci_dev *pci_dev; |
| |
| /* pci hardware address support */ |
| void __iomem *hw_base; |
| |
| /* uCode images, save to reload in case of failure */ |
| struct fw_desc ucode_code; /* runtime inst */ |
| struct fw_desc ucode_data; /* runtime data original */ |
| struct fw_desc ucode_data_backup; /* runtime data save/restore */ |
| struct fw_desc ucode_init; /* initialization inst */ |
| struct fw_desc ucode_init_data; /* initialization data */ |
| struct fw_desc ucode_boot; /* bootstrap inst */ |
| |
| |
| struct iwl3945_rxon_time_cmd rxon_timing; |
| |
| /* We declare this const so it can only be |
| * changed via explicit cast within the |
| * routines that actually update the physical |
| * hardware */ |
| const struct iwl3945_rxon_cmd active_rxon; |
| struct iwl3945_rxon_cmd staging_rxon; |
| |
| int error_recovering; |
| struct iwl3945_rxon_cmd recovery_rxon; |
| |
| /* 1st responses from initialize and runtime uCode images. |
| * 4965's initialize alive response contains some calibration data. */ |
| struct iwl3945_init_alive_resp card_alive_init; |
| struct iwl3945_alive_resp card_alive; |
| |
| #ifdef CONFIG_IWL3945_RFKILL |
| struct rfkill *rfkill; |
| #endif |
| |
| #ifdef CONFIG_IWL3945_LEDS |
| struct iwl3945_led led[IWL_LED_TRG_MAX]; |
| unsigned long last_blink_time; |
| u8 last_blink_rate; |
| u8 allow_blinking; |
| unsigned int rxtxpackets; |
| u64 led_tpt; |
| #endif |
| |
| |
| u16 active_rate; |
| u16 active_rate_basic; |
| |
| u8 call_post_assoc_from_beacon; |
| /* Rate scaling data */ |
| s8 data_retry_limit; |
| u8 retry_rate; |
| |
| wait_queue_head_t wait_command_queue; |
| |
| int activity_timer_active; |
| |
| /* Rx and Tx DMA processing queues */ |
| struct iwl3945_rx_queue rxq; |
| struct iwl3945_tx_queue txq[IWL_MAX_NUM_QUEUES]; |
| |
| unsigned long status; |
| |
| int last_rx_rssi; /* From Rx packet statisitics */ |
| int last_rx_noise; /* From beacon statistics */ |
| |
| struct iwl3945_power_mgr power_data; |
| |
| struct iwl3945_notif_statistics statistics; |
| unsigned long last_statistics_time; |
| |
| /* context information */ |
| u8 essid[IW_ESSID_MAX_SIZE]; |
| u8 essid_len; |
| u16 rates_mask; |
| |
| u32 power_mode; |
| u32 antenna; |
| u8 bssid[ETH_ALEN]; |
| u16 rts_threshold; |
| u8 mac_addr[ETH_ALEN]; |
| |
| /*station table variables */ |
| spinlock_t sta_lock; |
| int num_stations; |
| struct iwl3945_station_entry stations[IWL_STATION_COUNT]; |
| |
| /* Indication if ieee80211_ops->open has been called */ |
| u8 is_open; |
| |
| u8 mac80211_registered; |
| |
| /* Rx'd packet timing information */ |
| u32 last_beacon_time; |
| u64 last_tsf; |
| |
| /* eeprom */ |
| struct iwl3945_eeprom eeprom; |
| |
| enum nl80211_iftype iw_mode; |
| |
| struct sk_buff *ibss_beacon; |
| |
| /* Last Rx'd beacon timestamp */ |
| u32 timestamp0; |
| u32 timestamp1; |
| u16 beacon_int; |
| struct iwl3945_driver_hw_info hw_setting; |
| struct ieee80211_vif *vif; |
| |
| /* Current association information needed to configure the |
| * hardware */ |
| u16 assoc_id; |
| u16 assoc_capability; |
| u8 ps_mode; |
| |
| struct iwl3945_qos_info qos_data; |
| |
| struct workqueue_struct *workqueue; |
| |
| struct work_struct up; |
| struct work_struct restart; |
| struct work_struct calibrated_work; |
| struct work_struct scan_completed; |
| struct work_struct rx_replenish; |
| struct work_struct rf_kill; |
| struct work_struct abort_scan; |
| struct work_struct update_link_led; |
| struct work_struct auth_work; |
| struct work_struct report_work; |
| struct work_struct request_scan; |
| struct work_struct beacon_update; |
| struct work_struct set_monitor; |
| |
| struct tasklet_struct irq_tasklet; |
| |
| struct delayed_work init_alive_start; |
| struct delayed_work alive_start; |
| struct delayed_work activity_timer; |
| struct delayed_work thermal_periodic; |
| struct delayed_work gather_stats; |
| struct delayed_work scan_check; |
| |
| #define IWL_DEFAULT_TX_POWER 0x0F |
| s8 user_txpower_limit; |
| s8 max_channel_txpower_limit; |
| |
| #ifdef CONFIG_PM |
| u32 pm_state[16]; |
| #endif |
| |
| #ifdef CONFIG_IWL3945_DEBUG |
| /* debugging info */ |
| u32 framecnt_to_us; |
| atomic_t restrict_refcnt; |
| #endif |
| }; /*iwl3945_priv */ |
| |
| static inline int iwl3945_is_associated(struct iwl3945_priv *priv) |
| { |
| return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; |
| } |
| |
| static inline int is_channel_valid(const struct iwl3945_channel_info *ch_info) |
| { |
| if (ch_info == NULL) |
| return 0; |
| return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; |
| } |
| |
| static inline int is_channel_radar(const struct iwl3945_channel_info *ch_info) |
| { |
| return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; |
| } |
| |
| static inline u8 is_channel_a_band(const struct iwl3945_channel_info *ch_info) |
| { |
| return ch_info->band == IEEE80211_BAND_5GHZ; |
| } |
| |
| static inline u8 is_channel_bg_band(const struct iwl3945_channel_info *ch_info) |
| { |
| return ch_info->band == IEEE80211_BAND_2GHZ; |
| } |
| |
| static inline int is_channel_passive(const struct iwl3945_channel_info *ch) |
| { |
| return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; |
| } |
| |
| static inline int is_channel_ibss(const struct iwl3945_channel_info *ch) |
| { |
| return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; |
| } |
| |
| extern const struct iwl3945_channel_info *iwl3945_get_channel_info( |
| const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel); |
| |
| /* Requires full declaration of iwl3945_priv before including */ |
| #include "iwl-3945-io.h" |
| |
| #endif |