|  | /* | 
|  | * MCP23S08 SPI/I2C GPIO gpio expander driver | 
|  | * | 
|  | * The inputs and outputs of the mcp23s08, mcp23s17, mcp23008 and mcp23017 are | 
|  | * supported. | 
|  | * For the I2C versions of the chips (mcp23008 and mcp23017) generation of | 
|  | * interrupts is also supported. | 
|  | * The hardware of the SPI versions of the chips (mcp23s08 and mcp23s17) is | 
|  | * also capable of generating interrupts, but the linux driver does not | 
|  | * support that yet. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/spi/mcp23s08.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/byteorder.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_device.h> | 
|  |  | 
|  | /** | 
|  | * MCP types supported by driver | 
|  | */ | 
|  | #define MCP_TYPE_S08	0 | 
|  | #define MCP_TYPE_S17	1 | 
|  | #define MCP_TYPE_008	2 | 
|  | #define MCP_TYPE_017	3 | 
|  |  | 
|  | /* Registers are all 8 bits wide. | 
|  | * | 
|  | * The mcp23s17 has twice as many bits, and can be configured to work | 
|  | * with either 16 bit registers or with two adjacent 8 bit banks. | 
|  | */ | 
|  | #define MCP_IODIR	0x00		/* init/reset:  all ones */ | 
|  | #define MCP_IPOL	0x01 | 
|  | #define MCP_GPINTEN	0x02 | 
|  | #define MCP_DEFVAL	0x03 | 
|  | #define MCP_INTCON	0x04 | 
|  | #define MCP_IOCON	0x05 | 
|  | #	define IOCON_MIRROR	(1 << 6) | 
|  | #	define IOCON_SEQOP	(1 << 5) | 
|  | #	define IOCON_HAEN	(1 << 3) | 
|  | #	define IOCON_ODR	(1 << 2) | 
|  | #	define IOCON_INTPOL	(1 << 1) | 
|  | #define MCP_GPPU	0x06 | 
|  | #define MCP_INTF	0x07 | 
|  | #define MCP_INTCAP	0x08 | 
|  | #define MCP_GPIO	0x09 | 
|  | #define MCP_OLAT	0x0a | 
|  |  | 
|  | struct mcp23s08; | 
|  |  | 
|  | struct mcp23s08_ops { | 
|  | int	(*read)(struct mcp23s08 *mcp, unsigned reg); | 
|  | int	(*write)(struct mcp23s08 *mcp, unsigned reg, unsigned val); | 
|  | int	(*read_regs)(struct mcp23s08 *mcp, unsigned reg, | 
|  | u16 *vals, unsigned n); | 
|  | }; | 
|  |  | 
|  | struct mcp23s08 { | 
|  | u8			addr; | 
|  |  | 
|  | u16			cache[11]; | 
|  | u16			irq_rise; | 
|  | u16			irq_fall; | 
|  | int			irq; | 
|  | bool			irq_controller; | 
|  | /* lock protects the cached values */ | 
|  | struct mutex		lock; | 
|  | struct mutex		irq_lock; | 
|  | struct irq_domain	*irq_domain; | 
|  |  | 
|  | struct gpio_chip	chip; | 
|  |  | 
|  | const struct mcp23s08_ops	*ops; | 
|  | void			*data; /* ops specific data */ | 
|  | }; | 
|  |  | 
|  | /* A given spi_device can represent up to eight mcp23sxx chips | 
|  | * sharing the same chipselect but using different addresses | 
|  | * (e.g. chips #0 and #3 might be populated, but not #1 or $2). | 
|  | * Driver data holds all the per-chip data. | 
|  | */ | 
|  | struct mcp23s08_driver_data { | 
|  | unsigned		ngpio; | 
|  | struct mcp23s08		*mcp[8]; | 
|  | struct mcp23s08		chip[]; | 
|  | }; | 
|  |  | 
|  | /* This lock class tells lockdep that GPIO irqs are in a different | 
|  | * category than their parents, so it won't report false recursion. | 
|  | */ | 
|  | static struct lock_class_key gpio_lock_class; | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  |  | 
|  | static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg) | 
|  | { | 
|  | return i2c_smbus_read_byte_data(mcp->data, reg); | 
|  | } | 
|  |  | 
|  | static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) | 
|  | { | 
|  | return i2c_smbus_write_byte_data(mcp->data, reg, val); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) | 
|  | { | 
|  | while (n--) { | 
|  | int ret = mcp23008_read(mcp, reg++); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | *vals++ = ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg) | 
|  | { | 
|  | return i2c_smbus_read_word_data(mcp->data, reg << 1); | 
|  | } | 
|  |  | 
|  | static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) | 
|  | { | 
|  | return i2c_smbus_write_word_data(mcp->data, reg << 1, val); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) | 
|  | { | 
|  | while (n--) { | 
|  | int ret = mcp23017_read(mcp, reg++); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | *vals++ = ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct mcp23s08_ops mcp23008_ops = { | 
|  | .read		= mcp23008_read, | 
|  | .write		= mcp23008_write, | 
|  | .read_regs	= mcp23008_read_regs, | 
|  | }; | 
|  |  | 
|  | static const struct mcp23s08_ops mcp23017_ops = { | 
|  | .read		= mcp23017_read, | 
|  | .write		= mcp23017_write, | 
|  | .read_regs	= mcp23017_read_regs, | 
|  | }; | 
|  |  | 
|  | #endif /* CONFIG_I2C */ | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | #ifdef CONFIG_SPI_MASTER | 
|  |  | 
|  | static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg) | 
|  | { | 
|  | u8	tx[2], rx[1]; | 
|  | int	status; | 
|  |  | 
|  | tx[0] = mcp->addr | 0x01; | 
|  | tx[1] = reg; | 
|  | status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx); | 
|  | return (status < 0) ? status : rx[0]; | 
|  | } | 
|  |  | 
|  | static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) | 
|  | { | 
|  | u8	tx[3]; | 
|  |  | 
|  | tx[0] = mcp->addr; | 
|  | tx[1] = reg; | 
|  | tx[2] = val; | 
|  | return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) | 
|  | { | 
|  | u8	tx[2], *tmp; | 
|  | int	status; | 
|  |  | 
|  | if ((n + reg) > sizeof mcp->cache) | 
|  | return -EINVAL; | 
|  | tx[0] = mcp->addr | 0x01; | 
|  | tx[1] = reg; | 
|  |  | 
|  | tmp = (u8 *)vals; | 
|  | status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n); | 
|  | if (status >= 0) { | 
|  | while (n--) | 
|  | vals[n] = tmp[n]; /* expand to 16bit */ | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg) | 
|  | { | 
|  | u8	tx[2], rx[2]; | 
|  | int	status; | 
|  |  | 
|  | tx[0] = mcp->addr | 0x01; | 
|  | tx[1] = reg << 1; | 
|  | status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx); | 
|  | return (status < 0) ? status : (rx[0] | (rx[1] << 8)); | 
|  | } | 
|  |  | 
|  | static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val) | 
|  | { | 
|  | u8	tx[4]; | 
|  |  | 
|  | tx[0] = mcp->addr; | 
|  | tx[1] = reg << 1; | 
|  | tx[2] = val; | 
|  | tx[3] = val >> 8; | 
|  | return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n) | 
|  | { | 
|  | u8	tx[2]; | 
|  | int	status; | 
|  |  | 
|  | if ((n + reg) > sizeof mcp->cache) | 
|  | return -EINVAL; | 
|  | tx[0] = mcp->addr | 0x01; | 
|  | tx[1] = reg << 1; | 
|  |  | 
|  | status = spi_write_then_read(mcp->data, tx, sizeof tx, | 
|  | (u8 *)vals, n * 2); | 
|  | if (status >= 0) { | 
|  | while (n--) | 
|  | vals[n] = __le16_to_cpu((__le16)vals[n]); | 
|  | } | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static const struct mcp23s08_ops mcp23s08_ops = { | 
|  | .read		= mcp23s08_read, | 
|  | .write		= mcp23s08_write, | 
|  | .read_regs	= mcp23s08_read_regs, | 
|  | }; | 
|  |  | 
|  | static const struct mcp23s08_ops mcp23s17_ops = { | 
|  | .read		= mcp23s17_read, | 
|  | .write		= mcp23s17_write, | 
|  | .read_regs	= mcp23s17_read_regs, | 
|  | }; | 
|  |  | 
|  | #endif /* CONFIG_SPI_MASTER */ | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct mcp23s08	*mcp = container_of(chip, struct mcp23s08, chip); | 
|  | int status; | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  | mcp->cache[MCP_IODIR] |= (1 << offset); | 
|  | status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]); | 
|  | mutex_unlock(&mcp->lock); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int mcp23s08_get(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct mcp23s08	*mcp = container_of(chip, struct mcp23s08, chip); | 
|  | int status; | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  |  | 
|  | /* REVISIT reading this clears any IRQ ... */ | 
|  | status = mcp->ops->read(mcp, MCP_GPIO); | 
|  | if (status < 0) | 
|  | status = 0; | 
|  | else { | 
|  | mcp->cache[MCP_GPIO] = status; | 
|  | status = !!(status & (1 << offset)); | 
|  | } | 
|  | mutex_unlock(&mcp->lock); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, int value) | 
|  | { | 
|  | unsigned olat = mcp->cache[MCP_OLAT]; | 
|  |  | 
|  | if (value) | 
|  | olat |= mask; | 
|  | else | 
|  | olat &= ~mask; | 
|  | mcp->cache[MCP_OLAT] = olat; | 
|  | return mcp->ops->write(mcp, MCP_OLAT, olat); | 
|  | } | 
|  |  | 
|  | static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | struct mcp23s08	*mcp = container_of(chip, struct mcp23s08, chip); | 
|  | unsigned mask = 1 << offset; | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  | __mcp23s08_set(mcp, mask, value); | 
|  | mutex_unlock(&mcp->lock); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | struct mcp23s08	*mcp = container_of(chip, struct mcp23s08, chip); | 
|  | unsigned mask = 1 << offset; | 
|  | int status; | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  | status = __mcp23s08_set(mcp, mask, value); | 
|  | if (status == 0) { | 
|  | mcp->cache[MCP_IODIR] &= ~mask; | 
|  | status = mcp->ops->write(mcp, MCP_IODIR, mcp->cache[MCP_IODIR]); | 
|  | } | 
|  | mutex_unlock(&mcp->lock); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  | static irqreturn_t mcp23s08_irq(int irq, void *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = data; | 
|  | int intcap, intf, i; | 
|  | unsigned int child_irq; | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  | intf = mcp->ops->read(mcp, MCP_INTF); | 
|  | if (intf < 0) { | 
|  | mutex_unlock(&mcp->lock); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | mcp->cache[MCP_INTF] = intf; | 
|  |  | 
|  | intcap = mcp->ops->read(mcp, MCP_INTCAP); | 
|  | if (intcap < 0) { | 
|  | mutex_unlock(&mcp->lock); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | mcp->cache[MCP_INTCAP] = intcap; | 
|  | mutex_unlock(&mcp->lock); | 
|  |  | 
|  |  | 
|  | for (i = 0; i < mcp->chip.ngpio; i++) { | 
|  | if ((BIT(i) & mcp->cache[MCP_INTF]) && | 
|  | ((BIT(i) & intcap & mcp->irq_rise) || | 
|  | (mcp->irq_fall & ~intcap & BIT(i)))) { | 
|  | child_irq = irq_find_mapping(mcp->irq_domain, i); | 
|  | handle_nested_irq(child_irq); | 
|  | } | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int mcp23s08_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct mcp23s08 *mcp = container_of(chip, struct mcp23s08, chip); | 
|  |  | 
|  | return irq_find_mapping(mcp->irq_domain, offset); | 
|  | } | 
|  |  | 
|  | static void mcp23s08_irq_mask(struct irq_data *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  | unsigned int pos = data->hwirq; | 
|  |  | 
|  | mcp->cache[MCP_GPINTEN] &= ~BIT(pos); | 
|  | } | 
|  |  | 
|  | static void mcp23s08_irq_unmask(struct irq_data *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  | unsigned int pos = data->hwirq; | 
|  |  | 
|  | mcp->cache[MCP_GPINTEN] |= BIT(pos); | 
|  | } | 
|  |  | 
|  | static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  | unsigned int pos = data->hwirq; | 
|  | int status = 0; | 
|  |  | 
|  | if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { | 
|  | mcp->cache[MCP_INTCON] &= ~BIT(pos); | 
|  | mcp->irq_rise |= BIT(pos); | 
|  | mcp->irq_fall |= BIT(pos); | 
|  | } else if (type & IRQ_TYPE_EDGE_RISING) { | 
|  | mcp->cache[MCP_INTCON] &= ~BIT(pos); | 
|  | mcp->irq_rise |= BIT(pos); | 
|  | mcp->irq_fall &= ~BIT(pos); | 
|  | } else if (type & IRQ_TYPE_EDGE_FALLING) { | 
|  | mcp->cache[MCP_INTCON] &= ~BIT(pos); | 
|  | mcp->irq_rise &= ~BIT(pos); | 
|  | mcp->irq_fall |= BIT(pos); | 
|  | } else | 
|  | return -EINVAL; | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void mcp23s08_irq_bus_lock(struct irq_data *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  |  | 
|  | mutex_lock(&mcp->irq_lock); | 
|  | } | 
|  |  | 
|  | static void mcp23s08_irq_bus_unlock(struct irq_data *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  | mcp->ops->write(mcp, MCP_GPINTEN, mcp->cache[MCP_GPINTEN]); | 
|  | mcp->ops->write(mcp, MCP_DEFVAL, mcp->cache[MCP_DEFVAL]); | 
|  | mcp->ops->write(mcp, MCP_INTCON, mcp->cache[MCP_INTCON]); | 
|  | mutex_unlock(&mcp->lock); | 
|  | mutex_unlock(&mcp->irq_lock); | 
|  | } | 
|  |  | 
|  | static unsigned int mcp23s08_irq_startup(struct irq_data *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  |  | 
|  | if (gpio_lock_as_irq(&mcp->chip, data->hwirq)) | 
|  | dev_err(mcp->chip.dev, | 
|  | "unable to lock HW IRQ %lu for IRQ usage\n", | 
|  | data->hwirq); | 
|  |  | 
|  | mcp23s08_irq_unmask(data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mcp23s08_irq_shutdown(struct irq_data *data) | 
|  | { | 
|  | struct mcp23s08 *mcp = irq_data_get_irq_chip_data(data); | 
|  |  | 
|  | mcp23s08_irq_mask(data); | 
|  | gpio_unlock_as_irq(&mcp->chip, data->hwirq); | 
|  | } | 
|  |  | 
|  | static struct irq_chip mcp23s08_irq_chip = { | 
|  | .name = "gpio-mcp23xxx", | 
|  | .irq_mask = mcp23s08_irq_mask, | 
|  | .irq_unmask = mcp23s08_irq_unmask, | 
|  | .irq_set_type = mcp23s08_irq_set_type, | 
|  | .irq_bus_lock = mcp23s08_irq_bus_lock, | 
|  | .irq_bus_sync_unlock = mcp23s08_irq_bus_unlock, | 
|  | .irq_startup = mcp23s08_irq_startup, | 
|  | .irq_shutdown = mcp23s08_irq_shutdown, | 
|  | }; | 
|  |  | 
|  | static int mcp23s08_irq_setup(struct mcp23s08 *mcp) | 
|  | { | 
|  | struct gpio_chip *chip = &mcp->chip; | 
|  | int err, irq, j; | 
|  |  | 
|  | mutex_init(&mcp->irq_lock); | 
|  |  | 
|  | mcp->irq_domain = irq_domain_add_linear(chip->of_node, chip->ngpio, | 
|  | &irq_domain_simple_ops, mcp); | 
|  | if (!mcp->irq_domain) | 
|  | return -ENODEV; | 
|  |  | 
|  | err = devm_request_threaded_irq(chip->dev, mcp->irq, NULL, mcp23s08_irq, | 
|  | IRQF_TRIGGER_LOW | IRQF_ONESHOT, | 
|  | dev_name(chip->dev), mcp); | 
|  | if (err != 0) { | 
|  | dev_err(chip->dev, "unable to request IRQ#%d: %d\n", | 
|  | mcp->irq, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | chip->to_irq = mcp23s08_gpio_to_irq; | 
|  |  | 
|  | for (j = 0; j < mcp->chip.ngpio; j++) { | 
|  | irq = irq_create_mapping(mcp->irq_domain, j); | 
|  | irq_set_lockdep_class(irq, &gpio_lock_class); | 
|  | irq_set_chip_data(irq, mcp); | 
|  | irq_set_chip(irq, &mcp23s08_irq_chip); | 
|  | irq_set_nested_thread(irq, true); | 
|  | #ifdef CONFIG_ARM | 
|  | set_irq_flags(irq, IRQF_VALID); | 
|  | #else | 
|  | irq_set_noprobe(irq); | 
|  | #endif | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void mcp23s08_irq_teardown(struct mcp23s08 *mcp) | 
|  | { | 
|  | unsigned int irq, i; | 
|  |  | 
|  | free_irq(mcp->irq, mcp); | 
|  |  | 
|  | for (i = 0; i < mcp->chip.ngpio; i++) { | 
|  | irq = irq_find_mapping(mcp->irq_domain, i); | 
|  | if (irq > 0) | 
|  | irq_dispose_mapping(irq); | 
|  | } | 
|  |  | 
|  | irq_domain_remove(mcp->irq_domain); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  |  | 
|  | #include <linux/seq_file.h> | 
|  |  | 
|  | /* | 
|  | * This shows more info than the generic gpio dump code: | 
|  | * pullups, deglitching, open drain drive. | 
|  | */ | 
|  | static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip) | 
|  | { | 
|  | struct mcp23s08	*mcp; | 
|  | char		bank; | 
|  | int		t; | 
|  | unsigned	mask; | 
|  |  | 
|  | mcp = container_of(chip, struct mcp23s08, chip); | 
|  |  | 
|  | /* NOTE: we only handle one bank for now ... */ | 
|  | bank = '0' + ((mcp->addr >> 1) & 0x7); | 
|  |  | 
|  | mutex_lock(&mcp->lock); | 
|  | t = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache)); | 
|  | if (t < 0) { | 
|  | seq_printf(s, " I/O ERROR %d\n", t); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | for (t = 0, mask = 1; t < chip->ngpio; t++, mask <<= 1) { | 
|  | const char	*label; | 
|  |  | 
|  | label = gpiochip_is_requested(chip, t); | 
|  | if (!label) | 
|  | continue; | 
|  |  | 
|  | seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s", | 
|  | chip->base + t, bank, t, label, | 
|  | (mcp->cache[MCP_IODIR] & mask) ? "in " : "out", | 
|  | (mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo", | 
|  | (mcp->cache[MCP_GPPU] & mask) ? "up" : "  "); | 
|  | /* NOTE:  ignoring the irq-related registers */ | 
|  | seq_printf(s, "\n"); | 
|  | } | 
|  | done: | 
|  | mutex_unlock(&mcp->lock); | 
|  | } | 
|  |  | 
|  | #else | 
|  | #define mcp23s08_dbg_show	NULL | 
|  | #endif | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, | 
|  | void *data, unsigned addr, unsigned type, | 
|  | unsigned base, unsigned pullups) | 
|  | { | 
|  | int status; | 
|  | bool mirror = false; | 
|  |  | 
|  | mutex_init(&mcp->lock); | 
|  |  | 
|  | mcp->data = data; | 
|  | mcp->addr = addr; | 
|  |  | 
|  | mcp->chip.direction_input = mcp23s08_direction_input; | 
|  | mcp->chip.get = mcp23s08_get; | 
|  | mcp->chip.direction_output = mcp23s08_direction_output; | 
|  | mcp->chip.set = mcp23s08_set; | 
|  | mcp->chip.dbg_show = mcp23s08_dbg_show; | 
|  | #ifdef CONFIG_OF | 
|  | mcp->chip.of_gpio_n_cells = 2; | 
|  | mcp->chip.of_node = dev->of_node; | 
|  | #endif | 
|  |  | 
|  | switch (type) { | 
|  | #ifdef CONFIG_SPI_MASTER | 
|  | case MCP_TYPE_S08: | 
|  | mcp->ops = &mcp23s08_ops; | 
|  | mcp->chip.ngpio = 8; | 
|  | mcp->chip.label = "mcp23s08"; | 
|  | break; | 
|  |  | 
|  | case MCP_TYPE_S17: | 
|  | mcp->ops = &mcp23s17_ops; | 
|  | mcp->chip.ngpio = 16; | 
|  | mcp->chip.label = "mcp23s17"; | 
|  | break; | 
|  | #endif /* CONFIG_SPI_MASTER */ | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  | case MCP_TYPE_008: | 
|  | mcp->ops = &mcp23008_ops; | 
|  | mcp->chip.ngpio = 8; | 
|  | mcp->chip.label = "mcp23008"; | 
|  | break; | 
|  |  | 
|  | case MCP_TYPE_017: | 
|  | mcp->ops = &mcp23017_ops; | 
|  | mcp->chip.ngpio = 16; | 
|  | mcp->chip.label = "mcp23017"; | 
|  | break; | 
|  | #endif /* CONFIG_I2C */ | 
|  |  | 
|  | default: | 
|  | dev_err(dev, "invalid device type (%d)\n", type); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mcp->chip.base = base; | 
|  | mcp->chip.can_sleep = true; | 
|  | mcp->chip.dev = dev; | 
|  | mcp->chip.owner = THIS_MODULE; | 
|  |  | 
|  | /* verify MCP_IOCON.SEQOP = 0, so sequential reads work, | 
|  | * and MCP_IOCON.HAEN = 1, so we work with all chips. | 
|  | */ | 
|  |  | 
|  | status = mcp->ops->read(mcp, MCP_IOCON); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  |  | 
|  | mcp->irq_controller = of_property_read_bool(mcp->chip.of_node, | 
|  | "interrupt-controller"); | 
|  | if (mcp->irq && mcp->irq_controller && (type == MCP_TYPE_017)) | 
|  | mirror = of_property_read_bool(mcp->chip.of_node, | 
|  | "microchip,irq-mirror"); | 
|  |  | 
|  | if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror) { | 
|  | /* mcp23s17 has IOCON twice, make sure they are in sync */ | 
|  | status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8)); | 
|  | status |= IOCON_HAEN | (IOCON_HAEN << 8); | 
|  | status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8)); | 
|  | if (mirror) | 
|  | status |= IOCON_MIRROR | (IOCON_MIRROR << 8); | 
|  |  | 
|  | status = mcp->ops->write(mcp, MCP_IOCON, status); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* configure ~100K pullups */ | 
|  | status = mcp->ops->write(mcp, MCP_GPPU, pullups); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  |  | 
|  | status = mcp->ops->read_regs(mcp, 0, mcp->cache, ARRAY_SIZE(mcp->cache)); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  |  | 
|  | /* disable inverter on input */ | 
|  | if (mcp->cache[MCP_IPOL] != 0) { | 
|  | mcp->cache[MCP_IPOL] = 0; | 
|  | status = mcp->ops->write(mcp, MCP_IPOL, 0); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* disable irqs */ | 
|  | if (mcp->cache[MCP_GPINTEN] != 0) { | 
|  | mcp->cache[MCP_GPINTEN] = 0; | 
|  | status = mcp->ops->write(mcp, MCP_GPINTEN, 0); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | status = gpiochip_add(&mcp->chip); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  |  | 
|  | if (mcp->irq && mcp->irq_controller) { | 
|  | status = mcp23s08_irq_setup(mcp); | 
|  | if (status) { | 
|  | mcp23s08_irq_teardown(mcp); | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  | fail: | 
|  | if (status < 0) | 
|  | dev_dbg(dev, "can't setup chip %d, --> %d\n", | 
|  | addr, status); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | #ifdef CONFIG_SPI_MASTER | 
|  | static struct of_device_id mcp23s08_spi_of_match[] = { | 
|  | { | 
|  | .compatible = "microchip,mcp23s08", | 
|  | .data = (void *) MCP_TYPE_S08, | 
|  | }, | 
|  | { | 
|  | .compatible = "microchip,mcp23s17", | 
|  | .data = (void *) MCP_TYPE_S17, | 
|  | }, | 
|  | /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ | 
|  | { | 
|  | .compatible = "mcp,mcp23s08", | 
|  | .data = (void *) MCP_TYPE_S08, | 
|  | }, | 
|  | { | 
|  | .compatible = "mcp,mcp23s17", | 
|  | .data = (void *) MCP_TYPE_S17, | 
|  | }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match); | 
|  | #endif | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  | static struct of_device_id mcp23s08_i2c_of_match[] = { | 
|  | { | 
|  | .compatible = "microchip,mcp23008", | 
|  | .data = (void *) MCP_TYPE_008, | 
|  | }, | 
|  | { | 
|  | .compatible = "microchip,mcp23017", | 
|  | .data = (void *) MCP_TYPE_017, | 
|  | }, | 
|  | /* NOTE: The use of the mcp prefix is deprecated and will be removed. */ | 
|  | { | 
|  | .compatible = "mcp,mcp23008", | 
|  | .data = (void *) MCP_TYPE_008, | 
|  | }, | 
|  | { | 
|  | .compatible = "mcp,mcp23017", | 
|  | .data = (void *) MCP_TYPE_017, | 
|  | }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match); | 
|  | #endif | 
|  | #endif /* CONFIG_OF */ | 
|  |  | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_I2C) | 
|  |  | 
|  | static int mcp230xx_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct mcp23s08_platform_data *pdata; | 
|  | struct mcp23s08 *mcp; | 
|  | int status, base, pullups; | 
|  | const struct of_device_id *match; | 
|  |  | 
|  | match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match), | 
|  | &client->dev); | 
|  | pdata = dev_get_platdata(&client->dev); | 
|  | if (match || !pdata) { | 
|  | base = -1; | 
|  | pullups = 0; | 
|  | client->irq = irq_of_parse_and_map(client->dev.of_node, 0); | 
|  | } else { | 
|  | if (!gpio_is_valid(pdata->base)) { | 
|  | dev_dbg(&client->dev, "invalid platform data\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | base = pdata->base; | 
|  | pullups = pdata->chip[0].pullups; | 
|  | } | 
|  |  | 
|  | mcp = kzalloc(sizeof *mcp, GFP_KERNEL); | 
|  | if (!mcp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mcp->irq = client->irq; | 
|  | status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, | 
|  | id->driver_data, base, pullups); | 
|  | if (status) | 
|  | goto fail; | 
|  |  | 
|  | i2c_set_clientdata(client, mcp); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | kfree(mcp); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int mcp230xx_remove(struct i2c_client *client) | 
|  | { | 
|  | struct mcp23s08 *mcp = i2c_get_clientdata(client); | 
|  | int status; | 
|  |  | 
|  | if (client->irq && mcp->irq_controller) | 
|  | mcp23s08_irq_teardown(mcp); | 
|  |  | 
|  | status = gpiochip_remove(&mcp->chip); | 
|  | if (status == 0) | 
|  | kfree(mcp); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id mcp230xx_id[] = { | 
|  | { "mcp23008", MCP_TYPE_008 }, | 
|  | { "mcp23017", MCP_TYPE_017 }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, mcp230xx_id); | 
|  |  | 
|  | static struct i2c_driver mcp230xx_driver = { | 
|  | .driver = { | 
|  | .name	= "mcp230xx", | 
|  | .owner	= THIS_MODULE, | 
|  | .of_match_table = of_match_ptr(mcp23s08_i2c_of_match), | 
|  | }, | 
|  | .probe		= mcp230xx_probe, | 
|  | .remove		= mcp230xx_remove, | 
|  | .id_table	= mcp230xx_id, | 
|  | }; | 
|  |  | 
|  | static int __init mcp23s08_i2c_init(void) | 
|  | { | 
|  | return i2c_add_driver(&mcp230xx_driver); | 
|  | } | 
|  |  | 
|  | static void mcp23s08_i2c_exit(void) | 
|  | { | 
|  | i2c_del_driver(&mcp230xx_driver); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static int __init mcp23s08_i2c_init(void) { return 0; } | 
|  | static void mcp23s08_i2c_exit(void) { } | 
|  |  | 
|  | #endif /* CONFIG_I2C */ | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | #ifdef CONFIG_SPI_MASTER | 
|  |  | 
|  | static int mcp23s08_probe(struct spi_device *spi) | 
|  | { | 
|  | struct mcp23s08_platform_data	*pdata; | 
|  | unsigned			addr; | 
|  | unsigned			chips = 0; | 
|  | struct mcp23s08_driver_data	*data; | 
|  | int				status, type; | 
|  | unsigned			base = -1, | 
|  | ngpio = 0, | 
|  | pullups[ARRAY_SIZE(pdata->chip)]; | 
|  | const struct			of_device_id *match; | 
|  | u32				spi_present_mask = 0; | 
|  |  | 
|  | match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev); | 
|  | if (match) { | 
|  | type = (int)(uintptr_t)match->data; | 
|  | status = of_property_read_u32(spi->dev.of_node, | 
|  | "microchip,spi-present-mask", &spi_present_mask); | 
|  | if (status) { | 
|  | status = of_property_read_u32(spi->dev.of_node, | 
|  | "mcp,spi-present-mask", &spi_present_mask); | 
|  | if (status) { | 
|  | dev_err(&spi->dev, | 
|  | "DT has no spi-present-mask\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  | if ((spi_present_mask <= 0) || (spi_present_mask >= 256)) { | 
|  | dev_err(&spi->dev, "invalid spi-present-mask\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) | 
|  | pullups[addr] = 0; | 
|  | } else { | 
|  | type = spi_get_device_id(spi)->driver_data; | 
|  | pdata = dev_get_platdata(&spi->dev); | 
|  | if (!pdata || !gpio_is_valid(pdata->base)) { | 
|  | dev_dbg(&spi->dev, | 
|  | "invalid or missing platform data\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { | 
|  | if (!pdata->chip[addr].is_present) | 
|  | continue; | 
|  | chips++; | 
|  | if ((type == MCP_TYPE_S08) && (addr > 3)) { | 
|  | dev_err(&spi->dev, | 
|  | "mcp23s08 only supports address 0..3\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | spi_present_mask |= 1 << addr; | 
|  | pullups[addr] = pdata->chip[addr].pullups; | 
|  | } | 
|  |  | 
|  | if (!chips) | 
|  | return -ENODEV; | 
|  |  | 
|  | base = pdata->base; | 
|  | } | 
|  |  | 
|  | data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08), | 
|  | GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  | spi_set_drvdata(spi, data); | 
|  |  | 
|  | for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { | 
|  | if (!(spi_present_mask & (1 << addr))) | 
|  | continue; | 
|  | chips--; | 
|  | data->mcp[addr] = &data->chip[chips]; | 
|  | status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, | 
|  | 0x40 | (addr << 1), type, base, | 
|  | pullups[addr]); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  |  | 
|  | if (base != -1) | 
|  | base += (type == MCP_TYPE_S17) ? 16 : 8; | 
|  | ngpio += (type == MCP_TYPE_S17) ? 16 : 8; | 
|  | } | 
|  | data->ngpio = ngpio; | 
|  |  | 
|  | /* NOTE:  these chips have a relatively sane IRQ framework, with | 
|  | * per-signal masking and level/edge triggering.  It's not yet | 
|  | * handled here... | 
|  | */ | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) { | 
|  | int tmp; | 
|  |  | 
|  | if (!data->mcp[addr]) | 
|  | continue; | 
|  | tmp = gpiochip_remove(&data->mcp[addr]->chip); | 
|  | if (tmp < 0) | 
|  | dev_err(&spi->dev, "%s --> %d\n", "remove", tmp); | 
|  | } | 
|  | kfree(data); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int mcp23s08_remove(struct spi_device *spi) | 
|  | { | 
|  | struct mcp23s08_driver_data	*data = spi_get_drvdata(spi); | 
|  | unsigned			addr; | 
|  | int				status = 0; | 
|  |  | 
|  | for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) { | 
|  | int tmp; | 
|  |  | 
|  | if (!data->mcp[addr]) | 
|  | continue; | 
|  |  | 
|  | tmp = gpiochip_remove(&data->mcp[addr]->chip); | 
|  | if (tmp < 0) { | 
|  | dev_err(&spi->dev, "%s --> %d\n", "remove", tmp); | 
|  | status = tmp; | 
|  | } | 
|  | } | 
|  | if (status == 0) | 
|  | kfree(data); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static const struct spi_device_id mcp23s08_ids[] = { | 
|  | { "mcp23s08", MCP_TYPE_S08 }, | 
|  | { "mcp23s17", MCP_TYPE_S17 }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(spi, mcp23s08_ids); | 
|  |  | 
|  | static struct spi_driver mcp23s08_driver = { | 
|  | .probe		= mcp23s08_probe, | 
|  | .remove		= mcp23s08_remove, | 
|  | .id_table	= mcp23s08_ids, | 
|  | .driver = { | 
|  | .name	= "mcp23s08", | 
|  | .owner	= THIS_MODULE, | 
|  | .of_match_table = of_match_ptr(mcp23s08_spi_of_match), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init mcp23s08_spi_init(void) | 
|  | { | 
|  | return spi_register_driver(&mcp23s08_driver); | 
|  | } | 
|  |  | 
|  | static void mcp23s08_spi_exit(void) | 
|  | { | 
|  | spi_unregister_driver(&mcp23s08_driver); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static int __init mcp23s08_spi_init(void) { return 0; } | 
|  | static void mcp23s08_spi_exit(void) { } | 
|  |  | 
|  | #endif /* CONFIG_SPI_MASTER */ | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | static int __init mcp23s08_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = mcp23s08_spi_init(); | 
|  | if (ret) | 
|  | goto spi_fail; | 
|  |  | 
|  | ret = mcp23s08_i2c_init(); | 
|  | if (ret) | 
|  | goto i2c_fail; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | i2c_fail: | 
|  | mcp23s08_spi_exit(); | 
|  | spi_fail: | 
|  | return ret; | 
|  | } | 
|  | /* register after spi/i2c postcore initcall and before | 
|  | * subsys initcalls that may rely on these GPIOs | 
|  | */ | 
|  | subsys_initcall(mcp23s08_init); | 
|  |  | 
|  | static void __exit mcp23s08_exit(void) | 
|  | { | 
|  | mcp23s08_spi_exit(); | 
|  | mcp23s08_i2c_exit(); | 
|  | } | 
|  | module_exit(mcp23s08_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |