|  | /* | 
|  | * cpufreq driver for the cell processor | 
|  | * | 
|  | * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 | 
|  | * | 
|  | * Author: Christian Krafft <krafft@de.ibm.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2, or (at your option) | 
|  | * any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/of_platform.h> | 
|  |  | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/cell-regs.h> | 
|  | #include "cbe_cpufreq.h" | 
|  |  | 
|  | static DEFINE_MUTEX(cbe_switch_mutex); | 
|  |  | 
|  |  | 
|  | /* the CBE supports an 8 step frequency scaling */ | 
|  | static struct cpufreq_frequency_table cbe_freqs[] = { | 
|  | {1,	0}, | 
|  | {2,	0}, | 
|  | {3,	0}, | 
|  | {4,	0}, | 
|  | {5,	0}, | 
|  | {6,	0}, | 
|  | {8,	0}, | 
|  | {10,	0}, | 
|  | {0,	CPUFREQ_TABLE_END}, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * hardware specific functions | 
|  | */ | 
|  |  | 
|  | static int set_pmode(unsigned int cpu, unsigned int slow_mode) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | if (cbe_cpufreq_has_pmi) | 
|  | rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); | 
|  | else | 
|  | rc = cbe_cpufreq_set_pmode(cpu, slow_mode); | 
|  |  | 
|  | pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * cpufreq functions | 
|  | */ | 
|  |  | 
|  | static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) | 
|  | { | 
|  | const u32 *max_freqp; | 
|  | u32 max_freq; | 
|  | int i, cur_pmode; | 
|  | struct device_node *cpu; | 
|  |  | 
|  | cpu = of_get_cpu_node(policy->cpu, NULL); | 
|  |  | 
|  | if (!cpu) | 
|  | return -ENODEV; | 
|  |  | 
|  | pr_debug("init cpufreq on CPU %d\n", policy->cpu); | 
|  |  | 
|  | /* | 
|  | * Let's check we can actually get to the CELL regs | 
|  | */ | 
|  | if (!cbe_get_cpu_pmd_regs(policy->cpu) || | 
|  | !cbe_get_cpu_mic_tm_regs(policy->cpu)) { | 
|  | pr_info("invalid CBE regs pointers for cpufreq\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | max_freqp = of_get_property(cpu, "clock-frequency", NULL); | 
|  |  | 
|  | of_node_put(cpu); | 
|  |  | 
|  | if (!max_freqp) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* we need the freq in kHz */ | 
|  | max_freq = *max_freqp / 1000; | 
|  |  | 
|  | pr_debug("max clock-frequency is at %u kHz\n", max_freq); | 
|  | pr_debug("initializing frequency table\n"); | 
|  |  | 
|  | /* initialize frequency table */ | 
|  | for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { | 
|  | cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; | 
|  | pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); | 
|  | } | 
|  |  | 
|  | /* if DEBUG is enabled set_pmode() measures the latency | 
|  | * of a transition */ | 
|  | policy->cpuinfo.transition_latency = 25000; | 
|  |  | 
|  | cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); | 
|  | pr_debug("current pmode is at %d\n",cur_pmode); | 
|  |  | 
|  | policy->cur = cbe_freqs[cur_pmode].frequency; | 
|  |  | 
|  | #ifdef CONFIG_SMP | 
|  | cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu)); | 
|  | #endif | 
|  |  | 
|  | cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu); | 
|  |  | 
|  | /* this ensures that policy->cpuinfo_min | 
|  | * and policy->cpuinfo_max are set correctly */ | 
|  | return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs); | 
|  | } | 
|  |  | 
|  | static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) | 
|  | { | 
|  | cpufreq_frequency_table_put_attr(policy->cpu); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cbe_cpufreq_verify(struct cpufreq_policy *policy) | 
|  | { | 
|  | return cpufreq_frequency_table_verify(policy, cbe_freqs); | 
|  | } | 
|  |  | 
|  | static int cbe_cpufreq_target(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq, | 
|  | unsigned int relation) | 
|  | { | 
|  | int rc; | 
|  | struct cpufreq_freqs freqs; | 
|  | unsigned int cbe_pmode_new; | 
|  |  | 
|  | cpufreq_frequency_table_target(policy, | 
|  | cbe_freqs, | 
|  | target_freq, | 
|  | relation, | 
|  | &cbe_pmode_new); | 
|  |  | 
|  | freqs.old = policy->cur; | 
|  | freqs.new = cbe_freqs[cbe_pmode_new].frequency; | 
|  | freqs.cpu = policy->cpu; | 
|  |  | 
|  | mutex_lock(&cbe_switch_mutex); | 
|  | cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); | 
|  |  | 
|  | pr_debug("setting frequency for cpu %d to %d kHz, " \ | 
|  | "1/%d of max frequency\n", | 
|  | policy->cpu, | 
|  | cbe_freqs[cbe_pmode_new].frequency, | 
|  | cbe_freqs[cbe_pmode_new].index); | 
|  |  | 
|  | rc = set_pmode(policy->cpu, cbe_pmode_new); | 
|  |  | 
|  | cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); | 
|  | mutex_unlock(&cbe_switch_mutex); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static struct cpufreq_driver cbe_cpufreq_driver = { | 
|  | .verify		= cbe_cpufreq_verify, | 
|  | .target		= cbe_cpufreq_target, | 
|  | .init		= cbe_cpufreq_cpu_init, | 
|  | .exit		= cbe_cpufreq_cpu_exit, | 
|  | .name		= "cbe-cpufreq", | 
|  | .owner		= THIS_MODULE, | 
|  | .flags		= CPUFREQ_CONST_LOOPS, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * module init and destoy | 
|  | */ | 
|  |  | 
|  | static int __init cbe_cpufreq_init(void) | 
|  | { | 
|  | if (!machine_is(cell)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return cpufreq_register_driver(&cbe_cpufreq_driver); | 
|  | } | 
|  |  | 
|  | static void __exit cbe_cpufreq_exit(void) | 
|  | { | 
|  | cpufreq_unregister_driver(&cbe_cpufreq_driver); | 
|  | } | 
|  |  | 
|  | module_init(cbe_cpufreq_init); | 
|  | module_exit(cbe_cpufreq_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); |