| /* |
| * ZX Specific Extensions for Synopsys DW Multimedia Card Interface driver |
| * |
| * Copyright (C) 2016, Linaro Ltd. |
| * Copyright (C) 2016, ZTE Corp. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include "dw_mmc.h" |
| #include "dw_mmc-pltfm.h" |
| #include "dw_mmc-zx.h" |
| |
| struct dw_mci_zx_priv_data { |
| struct regmap *sysc_base; |
| }; |
| |
| enum delay_type { |
| DELAY_TYPE_READ, /* read dqs delay */ |
| DELAY_TYPE_CLK, /* clk sample delay */ |
| }; |
| |
| static int dw_mci_zx_emmc_set_delay(struct dw_mci *host, unsigned int delay, |
| enum delay_type dflag) |
| { |
| struct dw_mci_zx_priv_data *priv = host->priv; |
| struct regmap *sysc_base = priv->sysc_base; |
| unsigned int clksel; |
| unsigned int loop = 1000; |
| int ret; |
| |
| if (!sysc_base) |
| return -EINVAL; |
| |
| ret = regmap_update_bits(sysc_base, LB_AON_EMMC_CFG_REG0, |
| PARA_HALF_CLK_MODE | PARA_DLL_BYPASS_MODE | |
| PARA_PHASE_DET_SEL_MASK | |
| PARA_DLL_LOCK_NUM_MASK | |
| DLL_REG_SET | PARA_DLL_START_MASK, |
| PARA_DLL_START(4) | PARA_DLL_LOCK_NUM(4)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(sysc_base, LB_AON_EMMC_CFG_REG1, &clksel); |
| if (ret) |
| return ret; |
| |
| if (dflag == DELAY_TYPE_CLK) { |
| clksel &= ~CLK_SAMP_DELAY_MASK; |
| clksel |= CLK_SAMP_DELAY(delay); |
| } else { |
| clksel &= ~READ_DQS_DELAY_MASK; |
| clksel |= READ_DQS_DELAY(delay); |
| } |
| |
| regmap_write(sysc_base, LB_AON_EMMC_CFG_REG1, clksel); |
| regmap_update_bits(sysc_base, LB_AON_EMMC_CFG_REG0, |
| PARA_DLL_START_MASK | PARA_DLL_LOCK_NUM_MASK | |
| DLL_REG_SET, |
| PARA_DLL_START(4) | PARA_DLL_LOCK_NUM(4) | |
| DLL_REG_SET); |
| |
| do { |
| ret = regmap_read(sysc_base, LB_AON_EMMC_CFG_REG2, &clksel); |
| if (ret) |
| return ret; |
| |
| } while (--loop && !(clksel & ZX_DLL_LOCKED)); |
| |
| if (!loop) { |
| dev_err(host->dev, "Error: %s dll lock fail\n", __func__); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int dw_mci_zx_emmc_execute_tuning(struct dw_mci_slot *slot, u32 opcode) |
| { |
| struct dw_mci *host = slot->host; |
| struct mmc_host *mmc = slot->mmc; |
| int ret, len = 0, start = 0, end = 0, delay, best = 0; |
| |
| for (delay = 1; delay < 128; delay++) { |
| ret = dw_mci_zx_emmc_set_delay(host, delay, DELAY_TYPE_CLK); |
| if (!ret && mmc_send_tuning(mmc, opcode, NULL)) { |
| if (start >= 0) { |
| end = delay - 1; |
| /* check and update longest good range */ |
| if ((end - start) > len) { |
| best = (start + end) >> 1; |
| len = end - start; |
| } |
| } |
| start = -1; |
| end = 0; |
| continue; |
| } |
| if (start < 0) |
| start = delay; |
| } |
| |
| if (start >= 0) { |
| end = delay - 1; |
| if ((end - start) > len) { |
| best = (start + end) >> 1; |
| len = end - start; |
| } |
| } |
| if (best < 0) |
| return -EIO; |
| |
| dev_info(host->dev, "%s best range: start %d end %d\n", __func__, |
| start, end); |
| return dw_mci_zx_emmc_set_delay(host, best, DELAY_TYPE_CLK); |
| } |
| |
| static int dw_mci_zx_prepare_hs400_tuning(struct dw_mci *host, |
| struct mmc_ios *ios) |
| { |
| int ret; |
| |
| /* config phase shift as 90 degree */ |
| ret = dw_mci_zx_emmc_set_delay(host, 32, DELAY_TYPE_READ); |
| if (ret < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int dw_mci_zx_execute_tuning(struct dw_mci_slot *slot, u32 opcode) |
| { |
| struct dw_mci *host = slot->host; |
| |
| if (host->verid == 0x290a) /* only for emmc */ |
| return dw_mci_zx_emmc_execute_tuning(slot, opcode); |
| /* TODO: Add 0x210a dedicated tuning for sd/sdio */ |
| |
| return 0; |
| } |
| |
| static int dw_mci_zx_parse_dt(struct dw_mci *host) |
| { |
| struct device_node *np = host->dev->of_node; |
| struct device_node *node; |
| struct dw_mci_zx_priv_data *priv; |
| struct regmap *sysc_base; |
| int ret; |
| |
| /* syscon is needed only by emmc */ |
| node = of_parse_phandle(np, "zte,aon-syscon", 0); |
| if (node) { |
| sysc_base = syscon_node_to_regmap(node); |
| of_node_put(node); |
| |
| if (IS_ERR(sysc_base)) { |
| ret = PTR_ERR(sysc_base); |
| if (ret != -EPROBE_DEFER) |
| dev_err(host->dev, "Can't get syscon: %d\n", |
| ret); |
| return ret; |
| } |
| } else { |
| return 0; |
| } |
| |
| priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| priv->sysc_base = sysc_base; |
| host->priv = priv; |
| |
| return 0; |
| } |
| |
| static unsigned long zx_dwmmc_caps[3] = { |
| MMC_CAP_CMD23, |
| MMC_CAP_CMD23, |
| MMC_CAP_CMD23, |
| }; |
| |
| static const struct dw_mci_drv_data zx_drv_data = { |
| .caps = zx_dwmmc_caps, |
| .num_caps = ARRAY_SIZE(zx_dwmmc_caps), |
| .execute_tuning = dw_mci_zx_execute_tuning, |
| .prepare_hs400_tuning = dw_mci_zx_prepare_hs400_tuning, |
| .parse_dt = dw_mci_zx_parse_dt, |
| }; |
| |
| static const struct of_device_id dw_mci_zx_match[] = { |
| { .compatible = "zte,zx296718-dw-mshc", .data = &zx_drv_data}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, dw_mci_zx_match); |
| |
| static int dw_mci_zx_probe(struct platform_device *pdev) |
| { |
| const struct dw_mci_drv_data *drv_data; |
| const struct of_device_id *match; |
| |
| match = of_match_node(dw_mci_zx_match, pdev->dev.of_node); |
| drv_data = match->data; |
| |
| return dw_mci_pltfm_register(pdev, drv_data); |
| } |
| |
| static const struct dev_pm_ops dw_mci_zx_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend, |
| dw_mci_runtime_resume, |
| NULL) |
| }; |
| |
| static struct platform_driver dw_mci_zx_pltfm_driver = { |
| .probe = dw_mci_zx_probe, |
| .remove = dw_mci_pltfm_remove, |
| .driver = { |
| .name = "dwmmc_zx", |
| .of_match_table = dw_mci_zx_match, |
| .pm = &dw_mci_zx_dev_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(dw_mci_zx_pltfm_driver); |
| |
| MODULE_DESCRIPTION("ZTE emmc/sd driver"); |
| MODULE_LICENSE("GPL v2"); |