| // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 |
| /****************************************************************************** |
| * |
| * Module Name: utaddress - op_region address range check |
| * |
| * Copyright (C) 2000 - 2019, Intel Corp. |
| * |
| *****************************************************************************/ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acnamesp.h" |
| |
| #define _COMPONENT ACPI_UTILITIES |
| ACPI_MODULE_NAME("utaddress") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_add_address_range |
| * |
| * PARAMETERS: space_id - Address space ID |
| * address - op_region start address |
| * length - op_region length |
| * region_node - op_region namespace node |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Add the Operation Region address range to the global list. |
| * The only supported Space IDs are Memory and I/O. Called when |
| * the op_region address/length operands are fully evaluated. |
| * |
| * MUTEX: Locks the namespace |
| * |
| * NOTE: Because this interface is only called when an op_region argument |
| * list is evaluated, there cannot be any duplicate region_nodes. |
| * Duplicate Address/Length values are allowed, however, so that multiple |
| * address conflicts can be detected. |
| * |
| ******************************************************************************/ |
| acpi_status |
| acpi_ut_add_address_range(acpi_adr_space_type space_id, |
| acpi_physical_address address, |
| u32 length, struct acpi_namespace_node *region_node) |
| { |
| struct acpi_address_range *range_info; |
| |
| ACPI_FUNCTION_TRACE(ut_add_address_range); |
| |
| if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && |
| (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* Allocate/init a new info block, add it to the appropriate list */ |
| |
| range_info = ACPI_ALLOCATE(sizeof(struct acpi_address_range)); |
| if (!range_info) { |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| range_info->start_address = address; |
| range_info->end_address = (address + length - 1); |
| range_info->region_node = region_node; |
| |
| range_info->next = acpi_gbl_address_range_list[space_id]; |
| acpi_gbl_address_range_list[space_id] = range_info; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_NAMES, |
| "\nAdded [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n", |
| acpi_ut_get_node_name(range_info->region_node), |
| ACPI_FORMAT_UINT64(address), |
| ACPI_FORMAT_UINT64(range_info->end_address))); |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_remove_address_range |
| * |
| * PARAMETERS: space_id - Address space ID |
| * region_node - op_region namespace node |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Remove the Operation Region from the global list. The only |
| * supported Space IDs are Memory and I/O. Called when an |
| * op_region is deleted. |
| * |
| * MUTEX: Assumes the namespace is locked |
| * |
| ******************************************************************************/ |
| |
| void |
| acpi_ut_remove_address_range(acpi_adr_space_type space_id, |
| struct acpi_namespace_node *region_node) |
| { |
| struct acpi_address_range *range_info; |
| struct acpi_address_range *prev; |
| |
| ACPI_FUNCTION_TRACE(ut_remove_address_range); |
| |
| if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && |
| (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { |
| return_VOID; |
| } |
| |
| /* Get the appropriate list head and check the list */ |
| |
| range_info = prev = acpi_gbl_address_range_list[space_id]; |
| while (range_info) { |
| if (range_info->region_node == region_node) { |
| if (range_info == prev) { /* Found at list head */ |
| acpi_gbl_address_range_list[space_id] = |
| range_info->next; |
| } else { |
| prev->next = range_info->next; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_NAMES, |
| "\nRemoved [%4.4s] address range: 0x%8.8X%8.8X-0x%8.8X%8.8X\n", |
| acpi_ut_get_node_name(range_info-> |
| region_node), |
| ACPI_FORMAT_UINT64(range_info-> |
| start_address), |
| ACPI_FORMAT_UINT64(range_info-> |
| end_address))); |
| |
| ACPI_FREE(range_info); |
| return_VOID; |
| } |
| |
| prev = range_info; |
| range_info = range_info->next; |
| } |
| |
| return_VOID; |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_check_address_range |
| * |
| * PARAMETERS: space_id - Address space ID |
| * address - Start address |
| * length - Length of address range |
| * warn - TRUE if warning on overlap desired |
| * |
| * RETURN: Count of the number of conflicts detected. Zero is always |
| * returned for Space IDs other than Memory or I/O. |
| * |
| * DESCRIPTION: Check if the input address range overlaps any of the |
| * ASL operation region address ranges. The only supported |
| * Space IDs are Memory and I/O. |
| * |
| * MUTEX: Assumes the namespace is locked. |
| * |
| ******************************************************************************/ |
| |
| u32 |
| acpi_ut_check_address_range(acpi_adr_space_type space_id, |
| acpi_physical_address address, u32 length, u8 warn) |
| { |
| struct acpi_address_range *range_info; |
| acpi_physical_address end_address; |
| char *pathname; |
| u32 overlap_count = 0; |
| |
| ACPI_FUNCTION_TRACE(ut_check_address_range); |
| |
| if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && |
| (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { |
| return_UINT32(0); |
| } |
| |
| range_info = acpi_gbl_address_range_list[space_id]; |
| end_address = address + length - 1; |
| |
| /* Check entire list for all possible conflicts */ |
| |
| while (range_info) { |
| /* |
| * Check if the requested address/length overlaps this |
| * address range. There are four cases to consider: |
| * |
| * 1) Input address/length is contained completely in the |
| * address range |
| * 2) Input address/length overlaps range at the range start |
| * 3) Input address/length overlaps range at the range end |
| * 4) Input address/length completely encompasses the range |
| */ |
| if ((address <= range_info->end_address) && |
| (end_address >= range_info->start_address)) { |
| |
| /* Found an address range overlap */ |
| |
| overlap_count++; |
| if (warn) { /* Optional warning message */ |
| pathname = |
| acpi_ns_get_normalized_pathname(range_info-> |
| region_node, |
| TRUE); |
| |
| ACPI_WARNING((AE_INFO, |
| "%s range 0x%8.8X%8.8X-0x%8.8X%8.8X conflicts with OpRegion 0x%8.8X%8.8X-0x%8.8X%8.8X (%s)", |
| acpi_ut_get_region_name(space_id), |
| ACPI_FORMAT_UINT64(address), |
| ACPI_FORMAT_UINT64(end_address), |
| ACPI_FORMAT_UINT64(range_info-> |
| start_address), |
| ACPI_FORMAT_UINT64(range_info-> |
| end_address), |
| pathname)); |
| ACPI_FREE(pathname); |
| } |
| } |
| |
| range_info = range_info->next; |
| } |
| |
| return_UINT32(overlap_count); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ut_delete_address_lists |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Delete all global address range lists (called during |
| * subsystem shutdown). |
| * |
| ******************************************************************************/ |
| |
| void acpi_ut_delete_address_lists(void) |
| { |
| struct acpi_address_range *next; |
| struct acpi_address_range *range_info; |
| int i; |
| |
| /* Delete all elements in all address range lists */ |
| |
| for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) { |
| next = acpi_gbl_address_range_list[i]; |
| |
| while (next) { |
| range_info = next; |
| next = range_info->next; |
| ACPI_FREE(range_info); |
| } |
| |
| acpi_gbl_address_range_list[i] = NULL; |
| } |
| } |