| /* |
| * pps_gen_parport.c -- kernel parallel port PPS signal generator |
| * |
| * |
| * Copyright (C) 2009 Alexander Gordeev <lasaine@lvk.cs.msu.su> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| |
| /* |
| * TODO: |
| * fix issues when realtime clock is adjusted in a leap |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/time.h> |
| #include <linux/hrtimer.h> |
| #include <linux/parport.h> |
| |
| #define DRVDESC "parallel port PPS signal generator" |
| |
| #define SIGNAL 0 |
| #define NO_SIGNAL PARPORT_CONTROL_STROBE |
| |
| /* module parameters */ |
| |
| #define SEND_DELAY_MAX 100000 |
| |
| static unsigned int send_delay = 30000; |
| MODULE_PARM_DESC(delay, |
| "Delay between setting and dropping the signal (ns)"); |
| module_param_named(delay, send_delay, uint, 0); |
| |
| |
| #define SAFETY_INTERVAL 3000 /* set the hrtimer earlier for safety (ns) */ |
| |
| /* internal per port structure */ |
| struct pps_generator_pp { |
| struct pardevice *pardev; /* parport device */ |
| struct hrtimer timer; |
| long port_write_time; /* calibrated port write time (ns) */ |
| }; |
| |
| static struct pps_generator_pp device = { |
| .pardev = NULL, |
| }; |
| |
| static int attached; |
| |
| /* calibrated time between a hrtimer event and the reaction */ |
| static long hrtimer_error = SAFETY_INTERVAL; |
| |
| /* the kernel hrtimer event */ |
| static enum hrtimer_restart hrtimer_event(struct hrtimer *timer) |
| { |
| struct timespec64 expire_time, ts1, ts2, ts3, dts; |
| struct pps_generator_pp *dev; |
| struct parport *port; |
| long lim, delta; |
| unsigned long flags; |
| |
| /* We have to disable interrupts here. The idea is to prevent |
| * other interrupts on the same processor to introduce random |
| * lags while polling the clock. ktime_get_real_ts64() takes <1us on |
| * most machines while other interrupt handlers can take much |
| * more potentially. |
| * |
| * NB: approx time with blocked interrupts = |
| * send_delay + 3 * SAFETY_INTERVAL |
| */ |
| local_irq_save(flags); |
| |
| /* first of all we get the time stamp... */ |
| ktime_get_real_ts64(&ts1); |
| expire_time = ktime_to_timespec64(hrtimer_get_softexpires(timer)); |
| dev = container_of(timer, struct pps_generator_pp, timer); |
| lim = NSEC_PER_SEC - send_delay - dev->port_write_time; |
| |
| /* check if we are late */ |
| if (expire_time.tv_sec != ts1.tv_sec || ts1.tv_nsec > lim) { |
| local_irq_restore(flags); |
| pr_err("we are late this time %lld.%09ld\n", |
| (s64)ts1.tv_sec, ts1.tv_nsec); |
| goto done; |
| } |
| |
| /* busy loop until the time is right for an assert edge */ |
| do { |
| ktime_get_real_ts64(&ts2); |
| } while (expire_time.tv_sec == ts2.tv_sec && ts2.tv_nsec < lim); |
| |
| /* set the signal */ |
| port = dev->pardev->port; |
| port->ops->write_control(port, SIGNAL); |
| |
| /* busy loop until the time is right for a clear edge */ |
| lim = NSEC_PER_SEC - dev->port_write_time; |
| do { |
| ktime_get_real_ts64(&ts2); |
| } while (expire_time.tv_sec == ts2.tv_sec && ts2.tv_nsec < lim); |
| |
| /* unset the signal */ |
| port->ops->write_control(port, NO_SIGNAL); |
| |
| ktime_get_real_ts64(&ts3); |
| |
| local_irq_restore(flags); |
| |
| /* update calibrated port write time */ |
| dts = timespec64_sub(ts3, ts2); |
| dev->port_write_time = |
| (dev->port_write_time + timespec64_to_ns(&dts)) >> 1; |
| |
| done: |
| /* update calibrated hrtimer error */ |
| dts = timespec64_sub(ts1, expire_time); |
| delta = timespec64_to_ns(&dts); |
| /* If the new error value is bigger then the old, use the new |
| * value, if not then slowly move towards the new value. This |
| * way it should be safe in bad conditions and efficient in |
| * good conditions. |
| */ |
| if (delta >= hrtimer_error) |
| hrtimer_error = delta; |
| else |
| hrtimer_error = (3 * hrtimer_error + delta) >> 2; |
| |
| /* update the hrtimer expire time */ |
| hrtimer_set_expires(timer, |
| ktime_set(expire_time.tv_sec + 1, |
| NSEC_PER_SEC - (send_delay + |
| dev->port_write_time + SAFETY_INTERVAL + |
| 2 * hrtimer_error))); |
| |
| return HRTIMER_RESTART; |
| } |
| |
| /* calibrate port write time */ |
| #define PORT_NTESTS_SHIFT 5 |
| static void calibrate_port(struct pps_generator_pp *dev) |
| { |
| struct parport *port = dev->pardev->port; |
| int i; |
| long acc = 0; |
| |
| for (i = 0; i < (1 << PORT_NTESTS_SHIFT); i++) { |
| struct timespec64 a, b; |
| unsigned long irq_flags; |
| |
| local_irq_save(irq_flags); |
| ktime_get_real_ts64(&a); |
| port->ops->write_control(port, NO_SIGNAL); |
| ktime_get_real_ts64(&b); |
| local_irq_restore(irq_flags); |
| |
| b = timespec64_sub(b, a); |
| acc += timespec64_to_ns(&b); |
| } |
| |
| dev->port_write_time = acc >> PORT_NTESTS_SHIFT; |
| pr_info("port write takes %ldns\n", dev->port_write_time); |
| } |
| |
| static inline ktime_t next_intr_time(struct pps_generator_pp *dev) |
| { |
| struct timespec64 ts; |
| |
| ktime_get_real_ts64(&ts); |
| |
| return ktime_set(ts.tv_sec + |
| ((ts.tv_nsec > 990 * NSEC_PER_MSEC) ? 1 : 0), |
| NSEC_PER_SEC - (send_delay + |
| dev->port_write_time + 3 * SAFETY_INTERVAL)); |
| } |
| |
| static void parport_attach(struct parport *port) |
| { |
| struct pardev_cb pps_cb; |
| |
| if (attached) { |
| /* we already have a port */ |
| return; |
| } |
| |
| memset(&pps_cb, 0, sizeof(pps_cb)); |
| pps_cb.private = &device; |
| pps_cb.flags = PARPORT_FLAG_EXCL; |
| device.pardev = parport_register_dev_model(port, KBUILD_MODNAME, |
| &pps_cb, 0); |
| if (!device.pardev) { |
| pr_err("couldn't register with %s\n", port->name); |
| return; |
| } |
| |
| if (parport_claim_or_block(device.pardev) < 0) { |
| pr_err("couldn't claim %s\n", port->name); |
| goto err_unregister_dev; |
| } |
| |
| pr_info("attached to %s\n", port->name); |
| attached = 1; |
| |
| calibrate_port(&device); |
| |
| hrtimer_init(&device.timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); |
| device.timer.function = hrtimer_event; |
| hrtimer_start(&device.timer, next_intr_time(&device), HRTIMER_MODE_ABS); |
| |
| return; |
| |
| err_unregister_dev: |
| parport_unregister_device(device.pardev); |
| } |
| |
| static void parport_detach(struct parport *port) |
| { |
| if (port->cad != device.pardev) |
| return; /* not our port */ |
| |
| hrtimer_cancel(&device.timer); |
| parport_release(device.pardev); |
| parport_unregister_device(device.pardev); |
| } |
| |
| static struct parport_driver pps_gen_parport_driver = { |
| .name = KBUILD_MODNAME, |
| .match_port = parport_attach, |
| .detach = parport_detach, |
| .devmodel = true, |
| }; |
| |
| /* module staff */ |
| |
| static int __init pps_gen_parport_init(void) |
| { |
| int ret; |
| |
| pr_info(DRVDESC "\n"); |
| |
| if (send_delay > SEND_DELAY_MAX) { |
| pr_err("delay value should be not greater" |
| " then %d\n", SEND_DELAY_MAX); |
| return -EINVAL; |
| } |
| |
| ret = parport_register_driver(&pps_gen_parport_driver); |
| if (ret) { |
| pr_err("unable to register with parport\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit pps_gen_parport_exit(void) |
| { |
| parport_unregister_driver(&pps_gen_parport_driver); |
| pr_info("hrtimer avg error is %ldns\n", hrtimer_error); |
| } |
| |
| module_init(pps_gen_parport_init); |
| module_exit(pps_gen_parport_exit); |
| |
| MODULE_AUTHOR("Alexander Gordeev <lasaine@lvk.cs.msu.su>"); |
| MODULE_DESCRIPTION(DRVDESC); |
| MODULE_LICENSE("GPL"); |