| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Watchdog driver for DA9063 PMICs. |
| * |
| * Copyright(c) 2012 Dialog Semiconductor Ltd. |
| * |
| * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com> |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/watchdog.h> |
| #include <linux/platform_device.h> |
| #include <linux/uaccess.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/mfd/da9063/registers.h> |
| #include <linux/mfd/da9063/core.h> |
| #include <linux/regmap.h> |
| |
| /* |
| * Watchdog selector to timeout in seconds. |
| * 0: WDT disabled; |
| * others: timeout = 2048 ms * 2^(TWDSCALE-1). |
| */ |
| static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 }; |
| #define DA9063_TWDSCALE_DISABLE 0 |
| #define DA9063_TWDSCALE_MIN 1 |
| #define DA9063_TWDSCALE_MAX (ARRAY_SIZE(wdt_timeout) - 1) |
| #define DA9063_WDT_MIN_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MIN] |
| #define DA9063_WDT_MAX_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MAX] |
| #define DA9063_WDG_TIMEOUT wdt_timeout[3] |
| #define DA9063_RESET_PROTECTION_MS 256 |
| |
| static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs) |
| { |
| unsigned int i; |
| |
| for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) { |
| if (wdt_timeout[i] >= secs) |
| return i; |
| } |
| |
| return DA9063_TWDSCALE_MAX; |
| } |
| |
| /* |
| * Return 0 if watchdog is disabled, else non zero. |
| */ |
| static unsigned int da9063_wdt_is_running(struct da9063 *da9063) |
| { |
| unsigned int val; |
| |
| regmap_read(da9063->regmap, DA9063_REG_CONTROL_D, &val); |
| |
| return val & DA9063_TWDSCALE_MASK; |
| } |
| |
| static int da9063_wdt_disable_timer(struct da9063 *da9063) |
| { |
| return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, |
| DA9063_TWDSCALE_MASK, |
| DA9063_TWDSCALE_DISABLE); |
| } |
| |
| static int |
| da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int timeout) |
| { |
| unsigned int regval; |
| int ret; |
| |
| /* |
| * The watchdog triggers a reboot if a timeout value is already |
| * programmed because the timeout value combines two functions |
| * in one: indicating the counter limit and starting the watchdog. |
| * The watchdog must be disabled to be able to change the timeout |
| * value if the watchdog is already running. Then we can set the |
| * new timeout value which enables the watchdog again. |
| */ |
| ret = da9063_wdt_disable_timer(da9063); |
| if (ret) |
| return ret; |
| |
| usleep_range(150, 300); |
| regval = da9063_wdt_timeout_to_sel(timeout); |
| |
| return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, |
| DA9063_TWDSCALE_MASK, regval); |
| } |
| |
| static int da9063_wdt_start(struct watchdog_device *wdd) |
| { |
| struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| int ret; |
| |
| ret = da9063_wdt_update_timeout(da9063, wdd->timeout); |
| if (ret) |
| dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static int da9063_wdt_stop(struct watchdog_device *wdd) |
| { |
| struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| int ret; |
| |
| ret = da9063_wdt_disable_timer(da9063); |
| if (ret) |
| dev_alert(da9063->dev, "Watchdog failed to stop (err = %d)\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static int da9063_wdt_ping(struct watchdog_device *wdd) |
| { |
| struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| int ret; |
| |
| ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, |
| DA9063_WATCHDOG); |
| if (ret) |
| dev_alert(da9063->dev, "Failed to ping the watchdog (err = %d)\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static int da9063_wdt_set_timeout(struct watchdog_device *wdd, |
| unsigned int timeout) |
| { |
| struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| int ret = 0; |
| |
| /* |
| * There are two cases when a set_timeout() will be called: |
| * 1. The watchdog is off and someone wants to set the timeout for the |
| * further use. |
| * 2. The watchdog is already running and a new timeout value should be |
| * set. |
| * |
| * The watchdog can't store a timeout value not equal zero without |
| * enabling the watchdog, so the timeout must be buffered by the driver. |
| */ |
| if (watchdog_active(wdd)) |
| ret = da9063_wdt_update_timeout(da9063, timeout); |
| |
| if (ret) |
| dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n", |
| ret); |
| else |
| wdd->timeout = wdt_timeout[da9063_wdt_timeout_to_sel(timeout)]; |
| |
| return ret; |
| } |
| |
| static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action, |
| void *data) |
| { |
| struct da9063 *da9063 = watchdog_get_drvdata(wdd); |
| int ret; |
| |
| ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, |
| DA9063_SHUTDOWN); |
| if (ret) |
| dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static const struct watchdog_info da9063_watchdog_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| .identity = "DA9063 Watchdog", |
| }; |
| |
| static const struct watchdog_ops da9063_watchdog_ops = { |
| .owner = THIS_MODULE, |
| .start = da9063_wdt_start, |
| .stop = da9063_wdt_stop, |
| .ping = da9063_wdt_ping, |
| .set_timeout = da9063_wdt_set_timeout, |
| .restart = da9063_wdt_restart, |
| }; |
| |
| static int da9063_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct da9063 *da9063; |
| struct watchdog_device *wdd; |
| |
| if (!dev->parent) |
| return -EINVAL; |
| |
| da9063 = dev_get_drvdata(dev->parent); |
| if (!da9063) |
| return -EINVAL; |
| |
| wdd = devm_kzalloc(dev, sizeof(*wdd), GFP_KERNEL); |
| if (!wdd) |
| return -ENOMEM; |
| |
| wdd->info = &da9063_watchdog_info; |
| wdd->ops = &da9063_watchdog_ops; |
| wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT; |
| wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT; |
| wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS; |
| wdd->parent = dev; |
| wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS; |
| |
| watchdog_set_restart_priority(wdd, 128); |
| watchdog_set_drvdata(wdd, da9063); |
| |
| /* Set default timeout, maybe override it with DT value, scale it */ |
| wdd->timeout = DA9063_WDG_TIMEOUT; |
| watchdog_init_timeout(wdd, 0, dev); |
| da9063_wdt_set_timeout(wdd, wdd->timeout); |
| |
| /* Change the timeout to the default value if the watchdog is running */ |
| if (da9063_wdt_is_running(da9063)) { |
| da9063_wdt_update_timeout(da9063, wdd->timeout); |
| set_bit(WDOG_HW_RUNNING, &wdd->status); |
| } |
| |
| return devm_watchdog_register_device(dev, wdd); |
| } |
| |
| static struct platform_driver da9063_wdt_driver = { |
| .probe = da9063_wdt_probe, |
| .driver = { |
| .name = DA9063_DRVNAME_WATCHDOG, |
| }, |
| }; |
| module_platform_driver(da9063_wdt_driver); |
| |
| MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>"); |
| MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG); |