| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Marvell Armada AP806 System Controller |
| * |
| * Copyright (C) 2016 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| */ |
| |
| #define pr_fmt(fmt) "ap806-system-controller: " fmt |
| |
| #include <linux/clk-provider.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #define AP806_SAR_REG 0x400 |
| #define AP806_SAR_CLKFREQ_MODE_MASK 0x1f |
| |
| #define AP806_CLK_NUM 5 |
| |
| static struct clk *ap806_clks[AP806_CLK_NUM]; |
| |
| static struct clk_onecell_data ap806_clk_data = { |
| .clks = ap806_clks, |
| .clk_num = AP806_CLK_NUM, |
| }; |
| |
| static char *ap806_unique_name(struct device *dev, struct device_node *np, |
| char *name) |
| { |
| const __be32 *reg; |
| u64 addr; |
| |
| reg = of_get_property(np, "reg", NULL); |
| addr = of_translate_address(np, reg); |
| return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s", |
| (unsigned long long)addr, name); |
| } |
| |
| static int ap806_syscon_common_probe(struct platform_device *pdev, |
| struct device_node *syscon_node) |
| { |
| unsigned int freq_mode, cpuclk_freq; |
| const char *name, *fixedclk_name; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct regmap *regmap; |
| u32 reg; |
| int ret; |
| |
| regmap = syscon_node_to_regmap(syscon_node); |
| if (IS_ERR(regmap)) { |
| dev_err(dev, "cannot get regmap\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| ret = regmap_read(regmap, AP806_SAR_REG, ®); |
| if (ret) { |
| dev_err(dev, "cannot read from regmap\n"); |
| return ret; |
| } |
| |
| freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK; |
| switch (freq_mode) { |
| case 0x0: |
| case 0x1: |
| cpuclk_freq = 2000; |
| break; |
| case 0x6: |
| case 0x7: |
| cpuclk_freq = 1800; |
| break; |
| case 0x4: |
| case 0xB: |
| case 0xD: |
| cpuclk_freq = 1600; |
| break; |
| case 0x1a: |
| cpuclk_freq = 1400; |
| break; |
| case 0x14: |
| case 0x17: |
| cpuclk_freq = 1300; |
| break; |
| case 0x19: |
| cpuclk_freq = 1200; |
| break; |
| case 0x13: |
| case 0x1d: |
| cpuclk_freq = 1000; |
| break; |
| case 0x1c: |
| cpuclk_freq = 800; |
| break; |
| case 0x1b: |
| cpuclk_freq = 600; |
| break; |
| default: |
| dev_err(dev, "invalid SAR value\n"); |
| return -EINVAL; |
| } |
| |
| /* Convert to hertz */ |
| cpuclk_freq *= 1000 * 1000; |
| |
| /* CPU clocks depend on the Sample At Reset configuration */ |
| name = ap806_unique_name(dev, syscon_node, "cpu-cluster-0"); |
| ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL, |
| 0, cpuclk_freq); |
| if (IS_ERR(ap806_clks[0])) { |
| ret = PTR_ERR(ap806_clks[0]); |
| goto fail0; |
| } |
| |
| name = ap806_unique_name(dev, syscon_node, "cpu-cluster-1"); |
| ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0, |
| cpuclk_freq); |
| if (IS_ERR(ap806_clks[1])) { |
| ret = PTR_ERR(ap806_clks[1]); |
| goto fail1; |
| } |
| |
| /* Fixed clock is always 1200 Mhz */ |
| fixedclk_name = ap806_unique_name(dev, syscon_node, "fixed"); |
| ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL, |
| 0, 1200 * 1000 * 1000); |
| if (IS_ERR(ap806_clks[2])) { |
| ret = PTR_ERR(ap806_clks[2]); |
| goto fail2; |
| } |
| |
| /* MSS Clock is fixed clock divided by 6 */ |
| name = ap806_unique_name(dev, syscon_node, "mss"); |
| ap806_clks[3] = clk_register_fixed_factor(NULL, name, fixedclk_name, |
| 0, 1, 6); |
| if (IS_ERR(ap806_clks[3])) { |
| ret = PTR_ERR(ap806_clks[3]); |
| goto fail3; |
| } |
| |
| /* SDIO(/eMMC) Clock is fixed clock divided by 3 */ |
| name = ap806_unique_name(dev, syscon_node, "sdio"); |
| ap806_clks[4] = clk_register_fixed_factor(NULL, name, |
| fixedclk_name, |
| 0, 1, 3); |
| if (IS_ERR(ap806_clks[4])) { |
| ret = PTR_ERR(ap806_clks[4]); |
| goto fail4; |
| } |
| |
| ret = of_clk_add_provider(np, of_clk_src_onecell_get, &ap806_clk_data); |
| if (ret) |
| goto fail_clk_add; |
| |
| return 0; |
| |
| fail_clk_add: |
| clk_unregister_fixed_factor(ap806_clks[4]); |
| fail4: |
| clk_unregister_fixed_factor(ap806_clks[3]); |
| fail3: |
| clk_unregister_fixed_rate(ap806_clks[2]); |
| fail2: |
| clk_unregister_fixed_rate(ap806_clks[1]); |
| fail1: |
| clk_unregister_fixed_rate(ap806_clks[0]); |
| fail0: |
| return ret; |
| } |
| |
| static int ap806_syscon_legacy_probe(struct platform_device *pdev) |
| { |
| dev_warn(&pdev->dev, FW_WARN "Using legacy device tree binding\n"); |
| dev_warn(&pdev->dev, FW_WARN "Update your device tree:\n"); |
| dev_warn(&pdev->dev, FW_WARN |
| "This binding won't be supported in future kernel\n"); |
| |
| return ap806_syscon_common_probe(pdev, pdev->dev.of_node); |
| |
| } |
| |
| static int ap806_clock_probe(struct platform_device *pdev) |
| { |
| return ap806_syscon_common_probe(pdev, pdev->dev.of_node->parent); |
| } |
| |
| static const struct of_device_id ap806_syscon_legacy_of_match[] = { |
| { .compatible = "marvell,ap806-system-controller", }, |
| { } |
| }; |
| |
| static struct platform_driver ap806_syscon_legacy_driver = { |
| .probe = ap806_syscon_legacy_probe, |
| .driver = { |
| .name = "marvell-ap806-system-controller", |
| .of_match_table = ap806_syscon_legacy_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| builtin_platform_driver(ap806_syscon_legacy_driver); |
| |
| static const struct of_device_id ap806_clock_of_match[] = { |
| { .compatible = "marvell,ap806-clock", }, |
| { } |
| }; |
| |
| static struct platform_driver ap806_clock_driver = { |
| .probe = ap806_clock_probe, |
| .driver = { |
| .name = "marvell-ap806-clock", |
| .of_match_table = ap806_clock_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| builtin_platform_driver(ap806_clock_driver); |