| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Bluetooth HCI UART driver for Intel/AG6xx devices |
| * |
| * Copyright (C) 2016 Intel Corporation |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/skbuff.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/tty.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "hci_uart.h" |
| #include "btintel.h" |
| |
| struct ag6xx_data { |
| struct sk_buff *rx_skb; |
| struct sk_buff_head txq; |
| }; |
| |
| struct pbn_entry { |
| __le32 addr; |
| __le32 plen; |
| __u8 data[0]; |
| } __packed; |
| |
| static int ag6xx_open(struct hci_uart *hu) |
| { |
| struct ag6xx_data *ag6xx; |
| |
| BT_DBG("hu %p", hu); |
| |
| ag6xx = kzalloc(sizeof(*ag6xx), GFP_KERNEL); |
| if (!ag6xx) |
| return -ENOMEM; |
| |
| skb_queue_head_init(&ag6xx->txq); |
| |
| hu->priv = ag6xx; |
| return 0; |
| } |
| |
| static int ag6xx_close(struct hci_uart *hu) |
| { |
| struct ag6xx_data *ag6xx = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| skb_queue_purge(&ag6xx->txq); |
| kfree_skb(ag6xx->rx_skb); |
| kfree(ag6xx); |
| |
| hu->priv = NULL; |
| return 0; |
| } |
| |
| static int ag6xx_flush(struct hci_uart *hu) |
| { |
| struct ag6xx_data *ag6xx = hu->priv; |
| |
| BT_DBG("hu %p", hu); |
| |
| skb_queue_purge(&ag6xx->txq); |
| return 0; |
| } |
| |
| static struct sk_buff *ag6xx_dequeue(struct hci_uart *hu) |
| { |
| struct ag6xx_data *ag6xx = hu->priv; |
| struct sk_buff *skb; |
| |
| skb = skb_dequeue(&ag6xx->txq); |
| if (!skb) |
| return skb; |
| |
| /* Prepend skb with frame type */ |
| memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); |
| return skb; |
| } |
| |
| static int ag6xx_enqueue(struct hci_uart *hu, struct sk_buff *skb) |
| { |
| struct ag6xx_data *ag6xx = hu->priv; |
| |
| skb_queue_tail(&ag6xx->txq, skb); |
| return 0; |
| } |
| |
| static const struct h4_recv_pkt ag6xx_recv_pkts[] = { |
| { H4_RECV_ACL, .recv = hci_recv_frame }, |
| { H4_RECV_SCO, .recv = hci_recv_frame }, |
| { H4_RECV_EVENT, .recv = hci_recv_frame }, |
| }; |
| |
| static int ag6xx_recv(struct hci_uart *hu, const void *data, int count) |
| { |
| struct ag6xx_data *ag6xx = hu->priv; |
| |
| if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) |
| return -EUNATCH; |
| |
| ag6xx->rx_skb = h4_recv_buf(hu->hdev, ag6xx->rx_skb, data, count, |
| ag6xx_recv_pkts, |
| ARRAY_SIZE(ag6xx_recv_pkts)); |
| if (IS_ERR(ag6xx->rx_skb)) { |
| int err = PTR_ERR(ag6xx->rx_skb); |
| bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); |
| ag6xx->rx_skb = NULL; |
| return err; |
| } |
| |
| return count; |
| } |
| |
| static int intel_mem_write(struct hci_dev *hdev, u32 addr, u32 plen, |
| const void *data) |
| { |
| /* Can write a maximum of 247 bytes per HCI command. |
| * HCI cmd Header (3), Intel mem write header (6), data (247). |
| */ |
| while (plen > 0) { |
| struct sk_buff *skb; |
| u8 cmd_param[253], fragment_len = (plen > 247) ? 247 : plen; |
| __le32 leaddr = cpu_to_le32(addr); |
| |
| memcpy(cmd_param, &leaddr, 4); |
| cmd_param[4] = 0; |
| cmd_param[5] = fragment_len; |
| memcpy(cmd_param + 6, data, fragment_len); |
| |
| skb = __hci_cmd_sync(hdev, 0xfc8e, fragment_len + 6, cmd_param, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| kfree_skb(skb); |
| |
| plen -= fragment_len; |
| data += fragment_len; |
| addr += fragment_len; |
| } |
| |
| return 0; |
| } |
| |
| static int ag6xx_setup(struct hci_uart *hu) |
| { |
| struct hci_dev *hdev = hu->hdev; |
| struct sk_buff *skb; |
| struct intel_version ver; |
| const struct firmware *fw; |
| const u8 *fw_ptr; |
| char fwname[64]; |
| bool patched = false; |
| int err; |
| |
| hu->hdev->set_diag = btintel_set_diag; |
| hu->hdev->set_bdaddr = btintel_set_bdaddr; |
| |
| err = btintel_enter_mfg(hdev); |
| if (err) |
| return err; |
| |
| err = btintel_read_version(hdev, &ver); |
| if (err) |
| return err; |
| |
| btintel_version_info(hdev, &ver); |
| |
| /* The hardware platform number has a fixed value of 0x37 and |
| * for now only accept this single value. |
| */ |
| if (ver.hw_platform != 0x37) { |
| bt_dev_err(hdev, "Unsupported Intel hardware platform: 0x%X", |
| ver.hw_platform); |
| return -EINVAL; |
| } |
| |
| /* Only the hardware variant iBT 2.1 (AG6XX) is supported by this |
| * firmware setup method. |
| */ |
| if (ver.hw_variant != 0x0a) { |
| bt_dev_err(hdev, "Unsupported Intel hardware variant: 0x%x", |
| ver.hw_variant); |
| return -EINVAL; |
| } |
| |
| snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bddata", |
| ver.hw_platform, ver.hw_variant); |
| |
| err = request_firmware(&fw, fwname, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to open Intel bddata file: %s (%d)", |
| fwname, err); |
| goto patch; |
| } |
| fw_ptr = fw->data; |
| |
| bt_dev_info(hdev, "Applying bddata (%s)", fwname); |
| |
| skb = __hci_cmd_sync_ev(hdev, 0xfc2f, fw->size, fw->data, |
| HCI_EV_CMD_STATUS, HCI_CMD_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "Applying bddata failed (%ld)", PTR_ERR(skb)); |
| release_firmware(fw); |
| return PTR_ERR(skb); |
| } |
| kfree_skb(skb); |
| |
| release_firmware(fw); |
| |
| patch: |
| /* If there is no applied patch, fw_patch_num is always 0x00. In other |
| * cases, current firmware is already patched. No need to patch it. |
| */ |
| if (ver.fw_patch_num) { |
| bt_dev_info(hdev, "Device is already patched. patch num: %02x", |
| ver.fw_patch_num); |
| patched = true; |
| goto complete; |
| } |
| |
| snprintf(fwname, sizeof(fwname), |
| "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.pbn", |
| ver.hw_platform, ver.hw_variant, ver.hw_revision, |
| ver.fw_variant, ver.fw_revision, ver.fw_build_num, |
| ver.fw_build_ww, ver.fw_build_yy); |
| |
| err = request_firmware(&fw, fwname, &hdev->dev); |
| if (err < 0) { |
| bt_dev_err(hdev, "Failed to open Intel patch file: %s(%d)", |
| fwname, err); |
| goto complete; |
| } |
| fw_ptr = fw->data; |
| |
| bt_dev_info(hdev, "Patching firmware file (%s)", fwname); |
| |
| /* PBN patch file contains a list of binary patches to be applied on top |
| * of the embedded firmware. Each patch entry header contains the target |
| * address and patch size. |
| * |
| * Patch entry: |
| * | addr(le) | patch_len(le) | patch_data | |
| * | 4 Bytes | 4 Bytes | n Bytes | |
| * |
| * PBN file is terminated by a patch entry whose address is 0xffffffff. |
| */ |
| while (fw->size > fw_ptr - fw->data) { |
| struct pbn_entry *pbn = (void *)fw_ptr; |
| u32 addr, plen; |
| |
| if (pbn->addr == 0xffffffff) { |
| bt_dev_info(hdev, "Patching complete"); |
| patched = true; |
| break; |
| } |
| |
| addr = le32_to_cpu(pbn->addr); |
| plen = le32_to_cpu(pbn->plen); |
| |
| if (fw->data + fw->size <= pbn->data + plen) { |
| bt_dev_info(hdev, "Invalid patch len (%d)", plen); |
| break; |
| } |
| |
| bt_dev_info(hdev, "Patching %td/%zu", (fw_ptr - fw->data), |
| fw->size); |
| |
| err = intel_mem_write(hdev, addr, plen, pbn->data); |
| if (err) { |
| bt_dev_err(hdev, "Patching failed"); |
| break; |
| } |
| |
| fw_ptr = pbn->data + plen; |
| } |
| |
| release_firmware(fw); |
| |
| complete: |
| /* Exit manufacturing mode and reset */ |
| err = btintel_exit_mfg(hdev, true, patched); |
| if (err) |
| return err; |
| |
| /* Set the event mask for Intel specific vendor events. This enables |
| * a few extra events that are useful during general operation. |
| */ |
| btintel_set_event_mask_mfg(hdev, false); |
| |
| btintel_check_bdaddr(hdev); |
| return 0; |
| } |
| |
| static const struct hci_uart_proto ag6xx_proto = { |
| .id = HCI_UART_AG6XX, |
| .name = "AG6XX", |
| .manufacturer = 2, |
| .open = ag6xx_open, |
| .close = ag6xx_close, |
| .flush = ag6xx_flush, |
| .setup = ag6xx_setup, |
| .recv = ag6xx_recv, |
| .enqueue = ag6xx_enqueue, |
| .dequeue = ag6xx_dequeue, |
| }; |
| |
| int __init ag6xx_init(void) |
| { |
| return hci_uart_register_proto(&ag6xx_proto); |
| } |
| |
| int __exit ag6xx_deinit(void) |
| { |
| return hci_uart_unregister_proto(&ag6xx_proto); |
| } |