| /* | |
| * mac80211 work implementation | |
| * | |
| * Copyright 2003-2008, Jouni Malinen <j@w1.fi> | |
| * Copyright 2004, Instant802 Networks, Inc. | |
| * Copyright 2005, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2007, Michael Wu <flamingice@sourmilk.net> | |
| * Copyright 2009, Johannes Berg <johannes@sipsolutions.net> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/crc32.h> | |
| #include <linux/slab.h> | |
| #include <net/mac80211.h> | |
| #include <asm/unaligned.h> | |
| #include "ieee80211_i.h" | |
| #include "rate.h" | |
| #define IEEE80211_AUTH_TIMEOUT (HZ / 5) | |
| #define IEEE80211_AUTH_MAX_TRIES 3 | |
| #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) | |
| #define IEEE80211_ASSOC_MAX_TRIES 3 | |
| #define IEEE80211_MAX_PROBE_TRIES 5 | |
| enum work_action { | |
| WORK_ACT_MISMATCH, | |
| WORK_ACT_NONE, | |
| WORK_ACT_TIMEOUT, | |
| WORK_ACT_DONE, | |
| }; | |
| /* utils */ | |
| static inline void ASSERT_WORK_MTX(struct ieee80211_local *local) | |
| { | |
| WARN_ON(!mutex_is_locked(&local->work_mtx)); | |
| } | |
| /* | |
| * We can have multiple work items (and connection probing) | |
| * scheduling this timer, but we need to take care to only | |
| * reschedule it when it should fire _earlier_ than it was | |
| * asked for before, or if it's not pending right now. This | |
| * function ensures that. Note that it then is required to | |
| * run this function for all timeouts after the first one | |
| * has happened -- the work that runs from this timer will | |
| * do that. | |
| */ | |
| static void run_again(struct ieee80211_local *local, | |
| unsigned long timeout) | |
| { | |
| ASSERT_WORK_MTX(local); | |
| if (!timer_pending(&local->work_timer) || | |
| time_before(timeout, local->work_timer.expires)) | |
| mod_timer(&local->work_timer, timeout); | |
| } | |
| static void work_free_rcu(struct rcu_head *head) | |
| { | |
| struct ieee80211_work *wk = | |
| container_of(head, struct ieee80211_work, rcu_head); | |
| kfree(wk); | |
| } | |
| void free_work(struct ieee80211_work *wk) | |
| { | |
| call_rcu(&wk->rcu_head, work_free_rcu); | |
| } | |
| static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len, | |
| struct ieee80211_supported_band *sband, | |
| u32 *rates) | |
| { | |
| int i, j, count; | |
| *rates = 0; | |
| count = 0; | |
| for (i = 0; i < supp_rates_len; i++) { | |
| int rate = (supp_rates[i] & 0x7F) * 5; | |
| for (j = 0; j < sband->n_bitrates; j++) | |
| if (sband->bitrates[j].bitrate == rate) { | |
| *rates |= BIT(j); | |
| count++; | |
| break; | |
| } | |
| } | |
| return count; | |
| } | |
| /* frame sending functions */ | |
| static void ieee80211_add_ht_ie(struct sk_buff *skb, const u8 *ht_info_ie, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_channel *channel, | |
| enum ieee80211_smps_mode smps) | |
| { | |
| struct ieee80211_ht_info *ht_info; | |
| u8 *pos; | |
| u32 flags = channel->flags; | |
| u16 cap = sband->ht_cap.cap; | |
| __le16 tmp; | |
| if (!sband->ht_cap.ht_supported) | |
| return; | |
| if (!ht_info_ie) | |
| return; | |
| if (ht_info_ie[1] < sizeof(struct ieee80211_ht_info)) | |
| return; | |
| ht_info = (struct ieee80211_ht_info *)(ht_info_ie + 2); | |
| /* determine capability flags */ | |
| if (ieee80211_disable_40mhz_24ghz && | |
| sband->band == IEEE80211_BAND_2GHZ) { | |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | |
| cap &= ~IEEE80211_HT_CAP_SGI_40; | |
| } | |
| switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { | |
| case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | |
| if (flags & IEEE80211_CHAN_NO_HT40PLUS) { | |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | |
| cap &= ~IEEE80211_HT_CAP_SGI_40; | |
| } | |
| break; | |
| case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | |
| if (flags & IEEE80211_CHAN_NO_HT40MINUS) { | |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; | |
| cap &= ~IEEE80211_HT_CAP_SGI_40; | |
| } | |
| break; | |
| } | |
| /* set SM PS mode properly */ | |
| cap &= ~IEEE80211_HT_CAP_SM_PS; | |
| switch (smps) { | |
| case IEEE80211_SMPS_AUTOMATIC: | |
| case IEEE80211_SMPS_NUM_MODES: | |
| WARN_ON(1); | |
| case IEEE80211_SMPS_OFF: | |
| cap |= WLAN_HT_CAP_SM_PS_DISABLED << | |
| IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| break; | |
| case IEEE80211_SMPS_STATIC: | |
| cap |= WLAN_HT_CAP_SM_PS_STATIC << | |
| IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| break; | |
| case IEEE80211_SMPS_DYNAMIC: | |
| cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << | |
| IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| break; | |
| } | |
| /* reserve and fill IE */ | |
| pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); | |
| *pos++ = WLAN_EID_HT_CAPABILITY; | |
| *pos++ = sizeof(struct ieee80211_ht_cap); | |
| memset(pos, 0, sizeof(struct ieee80211_ht_cap)); | |
| /* capability flags */ | |
| tmp = cpu_to_le16(cap); | |
| memcpy(pos, &tmp, sizeof(u16)); | |
| pos += sizeof(u16); | |
| /* AMPDU parameters */ | |
| *pos++ = sband->ht_cap.ampdu_factor | | |
| (sband->ht_cap.ampdu_density << | |
| IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT); | |
| /* MCS set */ | |
| memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs)); | |
| pos += sizeof(sband->ht_cap.mcs); | |
| /* extended capabilities */ | |
| pos += sizeof(__le16); | |
| /* BF capabilities */ | |
| pos += sizeof(__le32); | |
| /* antenna selection */ | |
| pos += sizeof(u8); | |
| } | |
| static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_work *wk) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sk_buff *skb; | |
| struct ieee80211_mgmt *mgmt; | |
| u8 *pos, qos_info; | |
| const u8 *ies; | |
| size_t offset = 0, noffset; | |
| int i, len, count, rates_len, supp_rates_len; | |
| u16 capab; | |
| struct ieee80211_supported_band *sband; | |
| u32 rates = 0; | |
| sband = local->hw.wiphy->bands[wk->chan->band]; | |
| if (wk->assoc.supp_rates_len) { | |
| /* | |
| * Get all rates supported by the device and the AP as | |
| * some APs don't like getting a superset of their rates | |
| * in the association request (e.g. D-Link DAP 1353 in | |
| * b-only mode)... | |
| */ | |
| rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates, | |
| wk->assoc.supp_rates_len, | |
| sband, &rates); | |
| } else { | |
| /* | |
| * In case AP not provide any supported rates information | |
| * before association, we send information element(s) with | |
| * all rates that we support. | |
| */ | |
| rates = ~0; | |
| rates_len = sband->n_bitrates; | |
| } | |
| skb = alloc_skb(local->hw.extra_tx_headroom + | |
| sizeof(*mgmt) + /* bit too much but doesn't matter */ | |
| 2 + wk->assoc.ssid_len + /* SSID */ | |
| 4 + rates_len + /* (extended) rates */ | |
| 4 + /* power capability */ | |
| 2 + 2 * sband->n_channels + /* supported channels */ | |
| 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ | |
| wk->ie_len + /* extra IEs */ | |
| 9, /* WMM */ | |
| GFP_KERNEL); | |
| if (!skb) { | |
| printk(KERN_DEBUG "%s: failed to allocate buffer for assoc " | |
| "frame\n", sdata->name); | |
| return; | |
| } | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| capab = WLAN_CAPABILITY_ESS; | |
| if (sband->band == IEEE80211_BAND_2GHZ) { | |
| if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) | |
| capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; | |
| if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)) | |
| capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; | |
| } | |
| if (wk->assoc.capability & WLAN_CAPABILITY_PRIVACY) | |
| capab |= WLAN_CAPABILITY_PRIVACY; | |
| if ((wk->assoc.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && | |
| (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)) | |
| capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; | |
| mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); | |
| memset(mgmt, 0, 24); | |
| memcpy(mgmt->da, wk->filter_ta, ETH_ALEN); | |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | |
| memcpy(mgmt->bssid, wk->filter_ta, ETH_ALEN); | |
| if (!is_zero_ether_addr(wk->assoc.prev_bssid)) { | |
| skb_put(skb, 10); | |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_REASSOC_REQ); | |
| mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); | |
| mgmt->u.reassoc_req.listen_interval = | |
| cpu_to_le16(local->hw.conf.listen_interval); | |
| memcpy(mgmt->u.reassoc_req.current_ap, wk->assoc.prev_bssid, | |
| ETH_ALEN); | |
| } else { | |
| skb_put(skb, 4); | |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_ASSOC_REQ); | |
| mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); | |
| mgmt->u.assoc_req.listen_interval = | |
| cpu_to_le16(local->hw.conf.listen_interval); | |
| } | |
| /* SSID */ | |
| ies = pos = skb_put(skb, 2 + wk->assoc.ssid_len); | |
| *pos++ = WLAN_EID_SSID; | |
| *pos++ = wk->assoc.ssid_len; | |
| memcpy(pos, wk->assoc.ssid, wk->assoc.ssid_len); | |
| /* add all rates which were marked to be used above */ | |
| supp_rates_len = rates_len; | |
| if (supp_rates_len > 8) | |
| supp_rates_len = 8; | |
| len = sband->n_bitrates; | |
| pos = skb_put(skb, supp_rates_len + 2); | |
| *pos++ = WLAN_EID_SUPP_RATES; | |
| *pos++ = supp_rates_len; | |
| count = 0; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| if (BIT(i) & rates) { | |
| int rate = sband->bitrates[i].bitrate; | |
| *pos++ = (u8) (rate / 5); | |
| if (++count == 8) | |
| break; | |
| } | |
| } | |
| if (rates_len > count) { | |
| pos = skb_put(skb, rates_len - count + 2); | |
| *pos++ = WLAN_EID_EXT_SUPP_RATES; | |
| *pos++ = rates_len - count; | |
| for (i++; i < sband->n_bitrates; i++) { | |
| if (BIT(i) & rates) { | |
| int rate = sband->bitrates[i].bitrate; | |
| *pos++ = (u8) (rate / 5); | |
| } | |
| } | |
| } | |
| if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { | |
| /* 1. power capabilities */ | |
| pos = skb_put(skb, 4); | |
| *pos++ = WLAN_EID_PWR_CAPABILITY; | |
| *pos++ = 2; | |
| *pos++ = 0; /* min tx power */ | |
| *pos++ = wk->chan->max_power; /* max tx power */ | |
| /* 2. supported channels */ | |
| /* TODO: get this in reg domain format */ | |
| pos = skb_put(skb, 2 * sband->n_channels + 2); | |
| *pos++ = WLAN_EID_SUPPORTED_CHANNELS; | |
| *pos++ = 2 * sband->n_channels; | |
| for (i = 0; i < sband->n_channels; i++) { | |
| *pos++ = ieee80211_frequency_to_channel( | |
| sband->channels[i].center_freq); | |
| *pos++ = 1; /* one channel in the subband*/ | |
| } | |
| } | |
| /* if present, add any custom IEs that go before HT */ | |
| if (wk->ie_len && wk->ie) { | |
| static const u8 before_ht[] = { | |
| WLAN_EID_SSID, | |
| WLAN_EID_SUPP_RATES, | |
| WLAN_EID_EXT_SUPP_RATES, | |
| WLAN_EID_PWR_CAPABILITY, | |
| WLAN_EID_SUPPORTED_CHANNELS, | |
| WLAN_EID_RSN, | |
| WLAN_EID_QOS_CAPA, | |
| WLAN_EID_RRM_ENABLED_CAPABILITIES, | |
| WLAN_EID_MOBILITY_DOMAIN, | |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, | |
| }; | |
| noffset = ieee80211_ie_split(wk->ie, wk->ie_len, | |
| before_ht, ARRAY_SIZE(before_ht), | |
| offset); | |
| pos = skb_put(skb, noffset - offset); | |
| memcpy(pos, wk->ie + offset, noffset - offset); | |
| offset = noffset; | |
| } | |
| if (wk->assoc.use_11n && wk->assoc.wmm_used && | |
| local->hw.queues >= 4) | |
| ieee80211_add_ht_ie(skb, wk->assoc.ht_information_ie, | |
| sband, wk->chan, wk->assoc.smps); | |
| /* if present, add any custom non-vendor IEs that go after HT */ | |
| if (wk->ie_len && wk->ie) { | |
| noffset = ieee80211_ie_split_vendor(wk->ie, wk->ie_len, | |
| offset); | |
| pos = skb_put(skb, noffset - offset); | |
| memcpy(pos, wk->ie + offset, noffset - offset); | |
| offset = noffset; | |
| } | |
| if (wk->assoc.wmm_used && local->hw.queues >= 4) { | |
| if (wk->assoc.uapsd_used) { | |
| qos_info = local->uapsd_queues; | |
| qos_info |= (local->uapsd_max_sp_len << | |
| IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); | |
| } else { | |
| qos_info = 0; | |
| } | |
| pos = skb_put(skb, 9); | |
| *pos++ = WLAN_EID_VENDOR_SPECIFIC; | |
| *pos++ = 7; /* len */ | |
| *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */ | |
| *pos++ = 0x50; | |
| *pos++ = 0xf2; | |
| *pos++ = 2; /* WME */ | |
| *pos++ = 0; /* WME info */ | |
| *pos++ = 1; /* WME ver */ | |
| *pos++ = qos_info; | |
| } | |
| /* add any remaining custom (i.e. vendor specific here) IEs */ | |
| if (wk->ie_len && wk->ie) { | |
| noffset = wk->ie_len; | |
| pos = skb_put(skb, noffset - offset); | |
| memcpy(pos, wk->ie + offset, noffset - offset); | |
| } | |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | |
| ieee80211_tx_skb(sdata, skb); | |
| } | |
| static void ieee80211_remove_auth_bss(struct ieee80211_local *local, | |
| struct ieee80211_work *wk) | |
| { | |
| struct cfg80211_bss *cbss; | |
| u16 capa_val = WLAN_CAPABILITY_ESS; | |
| if (wk->probe_auth.privacy) | |
| capa_val |= WLAN_CAPABILITY_PRIVACY; | |
| cbss = cfg80211_get_bss(local->hw.wiphy, wk->chan, wk->filter_ta, | |
| wk->probe_auth.ssid, wk->probe_auth.ssid_len, | |
| WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY, | |
| capa_val); | |
| if (!cbss) | |
| return; | |
| cfg80211_unlink_bss(local->hw.wiphy, cbss); | |
| cfg80211_put_bss(cbss); | |
| } | |
| static enum work_action __must_check | |
| ieee80211_direct_probe(struct ieee80211_work *wk) | |
| { | |
| struct ieee80211_sub_if_data *sdata = wk->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| wk->probe_auth.tries++; | |
| if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) { | |
| printk(KERN_DEBUG "%s: direct probe to %pM timed out\n", | |
| sdata->name, wk->filter_ta); | |
| /* | |
| * Most likely AP is not in the range so remove the | |
| * bss struct for that AP. | |
| */ | |
| ieee80211_remove_auth_bss(local, wk); | |
| return WORK_ACT_TIMEOUT; | |
| } | |
| printk(KERN_DEBUG "%s: direct probe to %pM (try %d)\n", | |
| sdata->name, wk->filter_ta, wk->probe_auth.tries); | |
| /* | |
| * Direct probe is sent to broadcast address as some APs | |
| * will not answer to direct packet in unassociated state. | |
| */ | |
| ieee80211_send_probe_req(sdata, NULL, wk->probe_auth.ssid, | |
| wk->probe_auth.ssid_len, NULL, 0); | |
| wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; | |
| run_again(local, wk->timeout); | |
| return WORK_ACT_NONE; | |
| } | |
| static enum work_action __must_check | |
| ieee80211_authenticate(struct ieee80211_work *wk) | |
| { | |
| struct ieee80211_sub_if_data *sdata = wk->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| wk->probe_auth.tries++; | |
| if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) { | |
| printk(KERN_DEBUG "%s: authentication with %pM" | |
| " timed out\n", sdata->name, wk->filter_ta); | |
| /* | |
| * Most likely AP is not in the range so remove the | |
| * bss struct for that AP. | |
| */ | |
| ieee80211_remove_auth_bss(local, wk); | |
| return WORK_ACT_TIMEOUT; | |
| } | |
| printk(KERN_DEBUG "%s: authenticate with %pM (try %d)\n", | |
| sdata->name, wk->filter_ta, wk->probe_auth.tries); | |
| ieee80211_send_auth(sdata, 1, wk->probe_auth.algorithm, wk->ie, | |
| wk->ie_len, wk->filter_ta, NULL, 0, 0); | |
| wk->probe_auth.transaction = 2; | |
| wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; | |
| run_again(local, wk->timeout); | |
| return WORK_ACT_NONE; | |
| } | |
| static enum work_action __must_check | |
| ieee80211_associate(struct ieee80211_work *wk) | |
| { | |
| struct ieee80211_sub_if_data *sdata = wk->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| wk->assoc.tries++; | |
| if (wk->assoc.tries > IEEE80211_ASSOC_MAX_TRIES) { | |
| printk(KERN_DEBUG "%s: association with %pM" | |
| " timed out\n", | |
| sdata->name, wk->filter_ta); | |
| /* | |
| * Most likely AP is not in the range so remove the | |
| * bss struct for that AP. | |
| */ | |
| if (wk->assoc.bss) | |
| cfg80211_unlink_bss(local->hw.wiphy, wk->assoc.bss); | |
| return WORK_ACT_TIMEOUT; | |
| } | |
| printk(KERN_DEBUG "%s: associate with %pM (try %d)\n", | |
| sdata->name, wk->filter_ta, wk->assoc.tries); | |
| ieee80211_send_assoc(sdata, wk); | |
| wk->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; | |
| run_again(local, wk->timeout); | |
| return WORK_ACT_NONE; | |
| } | |
| static enum work_action __must_check | |
| ieee80211_remain_on_channel_timeout(struct ieee80211_work *wk) | |
| { | |
| /* | |
| * First time we run, do nothing -- the generic code will | |
| * have switched to the right channel etc. | |
| */ | |
| if (!wk->started) { | |
| wk->timeout = jiffies + msecs_to_jiffies(wk->remain.duration); | |
| cfg80211_ready_on_channel(wk->sdata->dev, (unsigned long) wk, | |
| wk->chan, wk->chan_type, | |
| wk->remain.duration, GFP_KERNEL); | |
| return WORK_ACT_NONE; | |
| } | |
| return WORK_ACT_TIMEOUT; | |
| } | |
| static void ieee80211_auth_challenge(struct ieee80211_work *wk, | |
| struct ieee80211_mgmt *mgmt, | |
| size_t len) | |
| { | |
| struct ieee80211_sub_if_data *sdata = wk->sdata; | |
| u8 *pos; | |
| struct ieee802_11_elems elems; | |
| pos = mgmt->u.auth.variable; | |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | |
| if (!elems.challenge) | |
| return; | |
| ieee80211_send_auth(sdata, 3, wk->probe_auth.algorithm, | |
| elems.challenge - 2, elems.challenge_len + 2, | |
| wk->filter_ta, wk->probe_auth.key, | |
| wk->probe_auth.key_len, wk->probe_auth.key_idx); | |
| wk->probe_auth.transaction = 4; | |
| } | |
| static enum work_action __must_check | |
| ieee80211_rx_mgmt_auth(struct ieee80211_work *wk, | |
| struct ieee80211_mgmt *mgmt, size_t len) | |
| { | |
| u16 auth_alg, auth_transaction, status_code; | |
| if (wk->type != IEEE80211_WORK_AUTH) | |
| return WORK_ACT_MISMATCH; | |
| if (len < 24 + 6) | |
| return WORK_ACT_NONE; | |
| auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); | |
| auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); | |
| status_code = le16_to_cpu(mgmt->u.auth.status_code); | |
| if (auth_alg != wk->probe_auth.algorithm || | |
| auth_transaction != wk->probe_auth.transaction) | |
| return WORK_ACT_NONE; | |
| if (status_code != WLAN_STATUS_SUCCESS) { | |
| printk(KERN_DEBUG "%s: %pM denied authentication (status %d)\n", | |
| wk->sdata->name, mgmt->sa, status_code); | |
| return WORK_ACT_DONE; | |
| } | |
| switch (wk->probe_auth.algorithm) { | |
| case WLAN_AUTH_OPEN: | |
| case WLAN_AUTH_LEAP: | |
| case WLAN_AUTH_FT: | |
| break; | |
| case WLAN_AUTH_SHARED_KEY: | |
| if (wk->probe_auth.transaction != 4) { | |
| ieee80211_auth_challenge(wk, mgmt, len); | |
| /* need another frame */ | |
| return WORK_ACT_NONE; | |
| } | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return WORK_ACT_NONE; | |
| } | |
| printk(KERN_DEBUG "%s: authenticated\n", wk->sdata->name); | |
| return WORK_ACT_DONE; | |
| } | |
| static enum work_action __must_check | |
| ieee80211_rx_mgmt_assoc_resp(struct ieee80211_work *wk, | |
| struct ieee80211_mgmt *mgmt, size_t len, | |
| bool reassoc) | |
| { | |
| struct ieee80211_sub_if_data *sdata = wk->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| u16 capab_info, status_code, aid; | |
| struct ieee802_11_elems elems; | |
| u8 *pos; | |
| if (wk->type != IEEE80211_WORK_ASSOC) | |
| return WORK_ACT_MISMATCH; | |
| /* | |
| * AssocResp and ReassocResp have identical structure, so process both | |
| * of them in this function. | |
| */ | |
| if (len < 24 + 6) | |
| return WORK_ACT_NONE; | |
| capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); | |
| status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); | |
| aid = le16_to_cpu(mgmt->u.assoc_resp.aid); | |
| printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x " | |
| "status=%d aid=%d)\n", | |
| sdata->name, reassoc ? "Rea" : "A", mgmt->sa, | |
| capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); | |
| pos = mgmt->u.assoc_resp.variable; | |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); | |
| if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && | |
| elems.timeout_int && elems.timeout_int_len == 5 && | |
| elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) { | |
| u32 tu, ms; | |
| tu = get_unaligned_le32(elems.timeout_int + 1); | |
| ms = tu * 1024 / 1000; | |
| printk(KERN_DEBUG "%s: %pM rejected association temporarily; " | |
| "comeback duration %u TU (%u ms)\n", | |
| sdata->name, mgmt->sa, tu, ms); | |
| wk->timeout = jiffies + msecs_to_jiffies(ms); | |
| if (ms > IEEE80211_ASSOC_TIMEOUT) | |
| run_again(local, wk->timeout); | |
| return WORK_ACT_NONE; | |
| } | |
| if (status_code != WLAN_STATUS_SUCCESS) | |
| printk(KERN_DEBUG "%s: %pM denied association (code=%d)\n", | |
| sdata->name, mgmt->sa, status_code); | |
| else | |
| printk(KERN_DEBUG "%s: associated\n", sdata->name); | |
| return WORK_ACT_DONE; | |
| } | |
| static enum work_action __must_check | |
| ieee80211_rx_mgmt_probe_resp(struct ieee80211_work *wk, | |
| struct ieee80211_mgmt *mgmt, size_t len, | |
| struct ieee80211_rx_status *rx_status) | |
| { | |
| struct ieee80211_sub_if_data *sdata = wk->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| size_t baselen; | |
| ASSERT_WORK_MTX(local); | |
| if (wk->type != IEEE80211_WORK_DIRECT_PROBE) | |
| return WORK_ACT_MISMATCH; | |
| if (len < 24 + 12) | |
| return WORK_ACT_NONE; | |
| baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; | |
| if (baselen > len) | |
| return WORK_ACT_NONE; | |
| printk(KERN_DEBUG "%s: direct probe responded\n", sdata->name); | |
| return WORK_ACT_DONE; | |
| } | |
| static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_rx_status *rx_status; | |
| struct ieee80211_mgmt *mgmt; | |
| struct ieee80211_work *wk; | |
| enum work_action rma; | |
| u16 fc; | |
| rx_status = (struct ieee80211_rx_status *) skb->cb; | |
| mgmt = (struct ieee80211_mgmt *) skb->data; | |
| fc = le16_to_cpu(mgmt->frame_control); | |
| mutex_lock(&local->work_mtx); | |
| list_for_each_entry(wk, &local->work_list, list) { | |
| const u8 *bssid = NULL; | |
| switch (wk->type) { | |
| case IEEE80211_WORK_DIRECT_PROBE: | |
| case IEEE80211_WORK_AUTH: | |
| case IEEE80211_WORK_ASSOC: | |
| bssid = wk->filter_ta; | |
| break; | |
| default: | |
| continue; | |
| } | |
| /* | |
| * Before queuing, we already verified mgmt->sa, | |
| * so this is needed just for matching. | |
| */ | |
| if (compare_ether_addr(bssid, mgmt->bssid)) | |
| continue; | |
| switch (fc & IEEE80211_FCTL_STYPE) { | |
| case IEEE80211_STYPE_PROBE_RESP: | |
| rma = ieee80211_rx_mgmt_probe_resp(wk, mgmt, skb->len, | |
| rx_status); | |
| break; | |
| case IEEE80211_STYPE_AUTH: | |
| rma = ieee80211_rx_mgmt_auth(wk, mgmt, skb->len); | |
| break; | |
| case IEEE80211_STYPE_ASSOC_RESP: | |
| rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt, | |
| skb->len, false); | |
| break; | |
| case IEEE80211_STYPE_REASSOC_RESP: | |
| rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt, | |
| skb->len, true); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| rma = WORK_ACT_NONE; | |
| } | |
| /* | |
| * We've either received an unexpected frame, or we have | |
| * multiple work items and need to match the frame to the | |
| * right one. | |
| */ | |
| if (rma == WORK_ACT_MISMATCH) | |
| continue; | |
| /* | |
| * We've processed this frame for that work, so it can't | |
| * belong to another work struct. | |
| * NB: this is also required for correctness for 'rma'! | |
| */ | |
| break; | |
| } | |
| switch (rma) { | |
| case WORK_ACT_MISMATCH: | |
| /* ignore this unmatched frame */ | |
| break; | |
| case WORK_ACT_NONE: | |
| break; | |
| case WORK_ACT_DONE: | |
| list_del_rcu(&wk->list); | |
| break; | |
| default: | |
| WARN(1, "unexpected: %d", rma); | |
| } | |
| mutex_unlock(&local->work_mtx); | |
| if (rma != WORK_ACT_DONE) | |
| goto out; | |
| switch (wk->done(wk, skb)) { | |
| case WORK_DONE_DESTROY: | |
| free_work(wk); | |
| break; | |
| case WORK_DONE_REQUEUE: | |
| synchronize_rcu(); | |
| wk->started = false; /* restart */ | |
| mutex_lock(&local->work_mtx); | |
| list_add_tail(&wk->list, &local->work_list); | |
| mutex_unlock(&local->work_mtx); | |
| } | |
| out: | |
| kfree_skb(skb); | |
| } | |
| static void ieee80211_work_timer(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (void *) data; | |
| if (local->quiescing) | |
| return; | |
| ieee80211_queue_work(&local->hw, &local->work_work); | |
| } | |
| static void ieee80211_work_work(struct work_struct *work) | |
| { | |
| struct ieee80211_local *local = | |
| container_of(work, struct ieee80211_local, work_work); | |
| struct sk_buff *skb; | |
| struct ieee80211_work *wk, *tmp; | |
| LIST_HEAD(free_work); | |
| enum work_action rma; | |
| bool remain_off_channel = false; | |
| if (local->scanning) | |
| return; | |
| /* | |
| * ieee80211_queue_work() should have picked up most cases, | |
| * here we'll pick the the rest. | |
| */ | |
| if (WARN(local->suspended, "work scheduled while going to suspend\n")) | |
| return; | |
| /* first process frames to avoid timing out while a frame is pending */ | |
| while ((skb = skb_dequeue(&local->work_skb_queue))) | |
| ieee80211_work_rx_queued_mgmt(local, skb); | |
| ieee80211_recalc_idle(local); | |
| mutex_lock(&local->work_mtx); | |
| list_for_each_entry_safe(wk, tmp, &local->work_list, list) { | |
| bool started = wk->started; | |
| /* mark work as started if it's on the current off-channel */ | |
| if (!started && local->tmp_channel && | |
| wk->chan == local->tmp_channel && | |
| wk->chan_type == local->tmp_channel_type) { | |
| started = true; | |
| wk->timeout = jiffies; | |
| } | |
| if (!started && !local->tmp_channel) { | |
| /* | |
| * TODO: could optimize this by leaving the | |
| * station vifs in awake mode if they | |
| * happen to be on the same channel as | |
| * the requested channel | |
| */ | |
| ieee80211_offchannel_stop_beaconing(local); | |
| ieee80211_offchannel_stop_station(local); | |
| local->tmp_channel = wk->chan; | |
| local->tmp_channel_type = wk->chan_type; | |
| ieee80211_hw_config(local, 0); | |
| started = true; | |
| wk->timeout = jiffies; | |
| } | |
| /* don't try to work with items that aren't started */ | |
| if (!started) | |
| continue; | |
| if (time_is_after_jiffies(wk->timeout)) { | |
| /* | |
| * This work item isn't supposed to be worked on | |
| * right now, but take care to adjust the timer | |
| * properly. | |
| */ | |
| run_again(local, wk->timeout); | |
| continue; | |
| } | |
| switch (wk->type) { | |
| default: | |
| WARN_ON(1); | |
| /* nothing */ | |
| rma = WORK_ACT_NONE; | |
| break; | |
| case IEEE80211_WORK_ABORT: | |
| rma = WORK_ACT_TIMEOUT; | |
| break; | |
| case IEEE80211_WORK_DIRECT_PROBE: | |
| rma = ieee80211_direct_probe(wk); | |
| break; | |
| case IEEE80211_WORK_AUTH: | |
| rma = ieee80211_authenticate(wk); | |
| break; | |
| case IEEE80211_WORK_ASSOC: | |
| rma = ieee80211_associate(wk); | |
| break; | |
| case IEEE80211_WORK_REMAIN_ON_CHANNEL: | |
| rma = ieee80211_remain_on_channel_timeout(wk); | |
| break; | |
| } | |
| wk->started = started; | |
| switch (rma) { | |
| case WORK_ACT_NONE: | |
| /* might have changed the timeout */ | |
| run_again(local, wk->timeout); | |
| break; | |
| case WORK_ACT_TIMEOUT: | |
| list_del_rcu(&wk->list); | |
| synchronize_rcu(); | |
| list_add(&wk->list, &free_work); | |
| break; | |
| default: | |
| WARN(1, "unexpected: %d", rma); | |
| } | |
| } | |
| list_for_each_entry(wk, &local->work_list, list) { | |
| if (!wk->started) | |
| continue; | |
| if (wk->chan != local->tmp_channel) | |
| continue; | |
| if (wk->chan_type != local->tmp_channel_type) | |
| continue; | |
| remain_off_channel = true; | |
| } | |
| if (!remain_off_channel && local->tmp_channel) { | |
| local->tmp_channel = NULL; | |
| ieee80211_hw_config(local, 0); | |
| ieee80211_offchannel_return(local, true); | |
| /* give connection some time to breathe */ | |
| run_again(local, jiffies + HZ/2); | |
| } | |
| mutex_lock(&local->scan_mtx); | |
| if (list_empty(&local->work_list) && local->scan_req && | |
| !local->scanning) | |
| ieee80211_queue_delayed_work(&local->hw, | |
| &local->scan_work, | |
| round_jiffies_relative(0)); | |
| mutex_unlock(&local->scan_mtx); | |
| mutex_unlock(&local->work_mtx); | |
| ieee80211_recalc_idle(local); | |
| list_for_each_entry_safe(wk, tmp, &free_work, list) { | |
| wk->done(wk, NULL); | |
| list_del(&wk->list); | |
| kfree(wk); | |
| } | |
| } | |
| void ieee80211_add_work(struct ieee80211_work *wk) | |
| { | |
| struct ieee80211_local *local; | |
| if (WARN_ON(!wk->chan)) | |
| return; | |
| if (WARN_ON(!wk->sdata)) | |
| return; | |
| if (WARN_ON(!wk->done)) | |
| return; | |
| if (WARN_ON(!ieee80211_sdata_running(wk->sdata))) | |
| return; | |
| wk->started = false; | |
| local = wk->sdata->local; | |
| mutex_lock(&local->work_mtx); | |
| list_add_tail(&wk->list, &local->work_list); | |
| mutex_unlock(&local->work_mtx); | |
| ieee80211_queue_work(&local->hw, &local->work_work); | |
| } | |
| void ieee80211_work_init(struct ieee80211_local *local) | |
| { | |
| mutex_init(&local->work_mtx); | |
| INIT_LIST_HEAD(&local->work_list); | |
| setup_timer(&local->work_timer, ieee80211_work_timer, | |
| (unsigned long)local); | |
| INIT_WORK(&local->work_work, ieee80211_work_work); | |
| skb_queue_head_init(&local->work_skb_queue); | |
| } | |
| void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_work *wk; | |
| mutex_lock(&local->work_mtx); | |
| list_for_each_entry(wk, &local->work_list, list) { | |
| if (wk->sdata != sdata) | |
| continue; | |
| wk->type = IEEE80211_WORK_ABORT; | |
| wk->started = true; | |
| wk->timeout = jiffies; | |
| } | |
| mutex_unlock(&local->work_mtx); | |
| /* run cleanups etc. */ | |
| ieee80211_work_work(&local->work_work); | |
| mutex_lock(&local->work_mtx); | |
| list_for_each_entry(wk, &local->work_list, list) { | |
| if (wk->sdata != sdata) | |
| continue; | |
| WARN_ON(1); | |
| break; | |
| } | |
| mutex_unlock(&local->work_mtx); | |
| } | |
| ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_mgmt *mgmt; | |
| struct ieee80211_work *wk; | |
| u16 fc; | |
| if (skb->len < 24) | |
| return RX_DROP_MONITOR; | |
| mgmt = (struct ieee80211_mgmt *) skb->data; | |
| fc = le16_to_cpu(mgmt->frame_control); | |
| list_for_each_entry_rcu(wk, &local->work_list, list) { | |
| if (sdata != wk->sdata) | |
| continue; | |
| if (compare_ether_addr(wk->filter_ta, mgmt->sa)) | |
| continue; | |
| if (compare_ether_addr(wk->filter_ta, mgmt->bssid)) | |
| continue; | |
| switch (fc & IEEE80211_FCTL_STYPE) { | |
| case IEEE80211_STYPE_AUTH: | |
| case IEEE80211_STYPE_PROBE_RESP: | |
| case IEEE80211_STYPE_ASSOC_RESP: | |
| case IEEE80211_STYPE_REASSOC_RESP: | |
| skb_queue_tail(&local->work_skb_queue, skb); | |
| ieee80211_queue_work(&local->hw, &local->work_work); | |
| return RX_QUEUED; | |
| } | |
| } | |
| return RX_CONTINUE; | |
| } | |
| static enum work_done_result ieee80211_remain_done(struct ieee80211_work *wk, | |
| struct sk_buff *skb) | |
| { | |
| /* | |
| * We are done serving the remain-on-channel command. | |
| */ | |
| cfg80211_remain_on_channel_expired(wk->sdata->dev, (unsigned long) wk, | |
| wk->chan, wk->chan_type, | |
| GFP_KERNEL); | |
| return WORK_DONE_DESTROY; | |
| } | |
| int ieee80211_wk_remain_on_channel(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_channel *chan, | |
| enum nl80211_channel_type channel_type, | |
| unsigned int duration, u64 *cookie) | |
| { | |
| struct ieee80211_work *wk; | |
| wk = kzalloc(sizeof(*wk), GFP_KERNEL); | |
| if (!wk) | |
| return -ENOMEM; | |
| wk->type = IEEE80211_WORK_REMAIN_ON_CHANNEL; | |
| wk->chan = chan; | |
| wk->chan_type = channel_type; | |
| wk->sdata = sdata; | |
| wk->done = ieee80211_remain_done; | |
| wk->remain.duration = duration; | |
| *cookie = (unsigned long) wk; | |
| ieee80211_add_work(wk); | |
| return 0; | |
| } | |
| int ieee80211_wk_cancel_remain_on_channel(struct ieee80211_sub_if_data *sdata, | |
| u64 cookie) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_work *wk, *tmp; | |
| bool found = false; | |
| mutex_lock(&local->work_mtx); | |
| list_for_each_entry_safe(wk, tmp, &local->work_list, list) { | |
| if ((unsigned long) wk == cookie) { | |
| wk->timeout = jiffies; | |
| found = true; | |
| break; | |
| } | |
| } | |
| mutex_unlock(&local->work_mtx); | |
| if (!found) | |
| return -ENOENT; | |
| ieee80211_queue_work(&local->hw, &local->work_work); | |
| return 0; | |
| } |