| /* | |
| * builtin-stat.c | |
| * | |
| * Builtin stat command: Give a precise performance counters summary | |
| * overview about any workload, CPU or specific PID. | |
| * | |
| * Sample output: | |
| $ perf stat ~/hackbench 10 | |
| Time: 0.104 | |
| Performance counter stats for '/home/mingo/hackbench': | |
| 1255.538611 task clock ticks # 10.143 CPU utilization factor | |
| 54011 context switches # 0.043 M/sec | |
| 385 CPU migrations # 0.000 M/sec | |
| 17755 pagefaults # 0.014 M/sec | |
| 3808323185 CPU cycles # 3033.219 M/sec | |
| 1575111190 instructions # 1254.530 M/sec | |
| 17367895 cache references # 13.833 M/sec | |
| 7674421 cache misses # 6.112 M/sec | |
| Wall-clock time elapsed: 123.786620 msecs | |
| * | |
| * Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com> | |
| * | |
| * Improvements and fixes by: | |
| * | |
| * Arjan van de Ven <arjan@linux.intel.com> | |
| * Yanmin Zhang <yanmin.zhang@intel.com> | |
| * Wu Fengguang <fengguang.wu@intel.com> | |
| * Mike Galbraith <efault@gmx.de> | |
| * Paul Mackerras <paulus@samba.org> | |
| * Jaswinder Singh Rajput <jaswinder@kernel.org> | |
| * | |
| * Released under the GPL v2. (and only v2, not any later version) | |
| */ | |
| #include "perf.h" | |
| #include "builtin.h" | |
| #include "util/util.h" | |
| #include "util/parse-options.h" | |
| #include "util/parse-events.h" | |
| #include "util/event.h" | |
| #include "util/evlist.h" | |
| #include "util/evsel.h" | |
| #include "util/debug.h" | |
| #include "util/header.h" | |
| #include "util/cpumap.h" | |
| #include "util/thread.h" | |
| #include "util/thread_map.h" | |
| #include <sys/prctl.h> | |
| #include <math.h> | |
| #include <locale.h> | |
| #define DEFAULT_SEPARATOR " " | |
| static struct perf_event_attr default_attrs[] = { | |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, | |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES }, | |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, | |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, | |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, | |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, | |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, | |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, | |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES }, | |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, | |
| }; | |
| struct perf_evlist *evsel_list; | |
| static bool system_wide = false; | |
| static int run_idx = 0; | |
| static int run_count = 1; | |
| static bool no_inherit = false; | |
| static bool scale = true; | |
| static bool no_aggr = false; | |
| static pid_t target_pid = -1; | |
| static pid_t target_tid = -1; | |
| static pid_t child_pid = -1; | |
| static bool null_run = false; | |
| static bool big_num = true; | |
| static int big_num_opt = -1; | |
| static const char *cpu_list; | |
| static const char *csv_sep = NULL; | |
| static bool csv_output = false; | |
| static volatile int done = 0; | |
| struct stats | |
| { | |
| double n, mean, M2; | |
| }; | |
| struct perf_stat { | |
| struct stats res_stats[3]; | |
| }; | |
| static int perf_evsel__alloc_stat_priv(struct perf_evsel *evsel) | |
| { | |
| evsel->priv = zalloc(sizeof(struct perf_stat)); | |
| return evsel->priv == NULL ? -ENOMEM : 0; | |
| } | |
| static void perf_evsel__free_stat_priv(struct perf_evsel *evsel) | |
| { | |
| free(evsel->priv); | |
| evsel->priv = NULL; | |
| } | |
| static void update_stats(struct stats *stats, u64 val) | |
| { | |
| double delta; | |
| stats->n++; | |
| delta = val - stats->mean; | |
| stats->mean += delta / stats->n; | |
| stats->M2 += delta*(val - stats->mean); | |
| } | |
| static double avg_stats(struct stats *stats) | |
| { | |
| return stats->mean; | |
| } | |
| /* | |
| * http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance | |
| * | |
| * (\Sum n_i^2) - ((\Sum n_i)^2)/n | |
| * s^2 = ------------------------------- | |
| * n - 1 | |
| * | |
| * http://en.wikipedia.org/wiki/Stddev | |
| * | |
| * The std dev of the mean is related to the std dev by: | |
| * | |
| * s | |
| * s_mean = ------- | |
| * sqrt(n) | |
| * | |
| */ | |
| static double stddev_stats(struct stats *stats) | |
| { | |
| double variance = stats->M2 / (stats->n - 1); | |
| double variance_mean = variance / stats->n; | |
| return sqrt(variance_mean); | |
| } | |
| struct stats runtime_nsecs_stats[MAX_NR_CPUS]; | |
| struct stats runtime_cycles_stats[MAX_NR_CPUS]; | |
| struct stats runtime_branches_stats[MAX_NR_CPUS]; | |
| struct stats walltime_nsecs_stats; | |
| static int create_perf_stat_counter(struct perf_evsel *evsel) | |
| { | |
| struct perf_event_attr *attr = &evsel->attr; | |
| if (scale) | |
| attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | | |
| PERF_FORMAT_TOTAL_TIME_RUNNING; | |
| if (system_wide) | |
| return perf_evsel__open_per_cpu(evsel, evsel_list->cpus, false, false); | |
| attr->inherit = !no_inherit; | |
| if (target_pid == -1 && target_tid == -1) { | |
| attr->disabled = 1; | |
| attr->enable_on_exec = 1; | |
| } | |
| return perf_evsel__open_per_thread(evsel, evsel_list->threads, false, false); | |
| } | |
| /* | |
| * Does the counter have nsecs as a unit? | |
| */ | |
| static inline int nsec_counter(struct perf_evsel *evsel) | |
| { | |
| if (perf_evsel__match(evsel, SOFTWARE, SW_CPU_CLOCK) || | |
| perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK)) | |
| return 1; | |
| return 0; | |
| } | |
| /* | |
| * Read out the results of a single counter: | |
| * aggregate counts across CPUs in system-wide mode | |
| */ | |
| static int read_counter_aggr(struct perf_evsel *counter) | |
| { | |
| struct perf_stat *ps = counter->priv; | |
| u64 *count = counter->counts->aggr.values; | |
| int i; | |
| if (__perf_evsel__read(counter, evsel_list->cpus->nr, | |
| evsel_list->threads->nr, scale) < 0) | |
| return -1; | |
| for (i = 0; i < 3; i++) | |
| update_stats(&ps->res_stats[i], count[i]); | |
| if (verbose) { | |
| fprintf(stderr, "%s: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n", | |
| event_name(counter), count[0], count[1], count[2]); | |
| } | |
| /* | |
| * Save the full runtime - to allow normalization during printout: | |
| */ | |
| if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK)) | |
| update_stats(&runtime_nsecs_stats[0], count[0]); | |
| if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES)) | |
| update_stats(&runtime_cycles_stats[0], count[0]); | |
| if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS)) | |
| update_stats(&runtime_branches_stats[0], count[0]); | |
| return 0; | |
| } | |
| /* | |
| * Read out the results of a single counter: | |
| * do not aggregate counts across CPUs in system-wide mode | |
| */ | |
| static int read_counter(struct perf_evsel *counter) | |
| { | |
| u64 *count; | |
| int cpu; | |
| for (cpu = 0; cpu < evsel_list->cpus->nr; cpu++) { | |
| if (__perf_evsel__read_on_cpu(counter, cpu, 0, scale) < 0) | |
| return -1; | |
| count = counter->counts->cpu[cpu].values; | |
| if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK)) | |
| update_stats(&runtime_nsecs_stats[cpu], count[0]); | |
| if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES)) | |
| update_stats(&runtime_cycles_stats[cpu], count[0]); | |
| if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS)) | |
| update_stats(&runtime_branches_stats[cpu], count[0]); | |
| } | |
| return 0; | |
| } | |
| static int run_perf_stat(int argc __used, const char **argv) | |
| { | |
| unsigned long long t0, t1; | |
| struct perf_evsel *counter; | |
| int status = 0; | |
| int child_ready_pipe[2], go_pipe[2]; | |
| const bool forks = (argc > 0); | |
| char buf; | |
| if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) { | |
| perror("failed to create pipes"); | |
| exit(1); | |
| } | |
| if (forks) { | |
| if ((child_pid = fork()) < 0) | |
| perror("failed to fork"); | |
| if (!child_pid) { | |
| close(child_ready_pipe[0]); | |
| close(go_pipe[1]); | |
| fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC); | |
| /* | |
| * Do a dummy execvp to get the PLT entry resolved, | |
| * so we avoid the resolver overhead on the real | |
| * execvp call. | |
| */ | |
| execvp("", (char **)argv); | |
| /* | |
| * Tell the parent we're ready to go | |
| */ | |
| close(child_ready_pipe[1]); | |
| /* | |
| * Wait until the parent tells us to go. | |
| */ | |
| if (read(go_pipe[0], &buf, 1) == -1) | |
| perror("unable to read pipe"); | |
| execvp(argv[0], (char **)argv); | |
| perror(argv[0]); | |
| exit(-1); | |
| } | |
| if (target_tid == -1 && target_pid == -1 && !system_wide) | |
| evsel_list->threads->map[0] = child_pid; | |
| /* | |
| * Wait for the child to be ready to exec. | |
| */ | |
| close(child_ready_pipe[1]); | |
| close(go_pipe[0]); | |
| if (read(child_ready_pipe[0], &buf, 1) == -1) | |
| perror("unable to read pipe"); | |
| close(child_ready_pipe[0]); | |
| } | |
| list_for_each_entry(counter, &evsel_list->entries, node) { | |
| if (create_perf_stat_counter(counter) < 0) { | |
| if (errno == -EPERM || errno == -EACCES) { | |
| error("You may not have permission to collect %sstats.\n" | |
| "\t Consider tweaking" | |
| " /proc/sys/kernel/perf_event_paranoid or running as root.", | |
| system_wide ? "system-wide " : ""); | |
| } else if (errno == ENOENT) { | |
| error("%s event is not supported. ", event_name(counter)); | |
| } else { | |
| error("open_counter returned with %d (%s). " | |
| "/bin/dmesg may provide additional information.\n", | |
| errno, strerror(errno)); | |
| } | |
| if (child_pid != -1) | |
| kill(child_pid, SIGTERM); | |
| die("Not all events could be opened.\n"); | |
| return -1; | |
| } | |
| } | |
| if (perf_evlist__set_filters(evsel_list)) { | |
| error("failed to set filter with %d (%s)\n", errno, | |
| strerror(errno)); | |
| return -1; | |
| } | |
| /* | |
| * Enable counters and exec the command: | |
| */ | |
| t0 = rdclock(); | |
| if (forks) { | |
| close(go_pipe[1]); | |
| wait(&status); | |
| } else { | |
| while(!done) sleep(1); | |
| } | |
| t1 = rdclock(); | |
| update_stats(&walltime_nsecs_stats, t1 - t0); | |
| if (no_aggr) { | |
| list_for_each_entry(counter, &evsel_list->entries, node) { | |
| read_counter(counter); | |
| perf_evsel__close_fd(counter, evsel_list->cpus->nr, 1); | |
| } | |
| } else { | |
| list_for_each_entry(counter, &evsel_list->entries, node) { | |
| read_counter_aggr(counter); | |
| perf_evsel__close_fd(counter, evsel_list->cpus->nr, | |
| evsel_list->threads->nr); | |
| } | |
| } | |
| return WEXITSTATUS(status); | |
| } | |
| static void print_noise(struct perf_evsel *evsel, double avg) | |
| { | |
| struct perf_stat *ps; | |
| if (run_count == 1) | |
| return; | |
| ps = evsel->priv; | |
| fprintf(stderr, " ( +- %7.3f%% )", | |
| 100 * stddev_stats(&ps->res_stats[0]) / avg); | |
| } | |
| static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg) | |
| { | |
| double msecs = avg / 1e6; | |
| char cpustr[16] = { '\0', }; | |
| const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-24s"; | |
| if (no_aggr) | |
| sprintf(cpustr, "CPU%*d%s", | |
| csv_output ? 0 : -4, | |
| evsel_list->cpus->map[cpu], csv_sep); | |
| fprintf(stderr, fmt, cpustr, msecs, csv_sep, event_name(evsel)); | |
| if (evsel->cgrp) | |
| fprintf(stderr, "%s%s", csv_sep, evsel->cgrp->name); | |
| if (csv_output) | |
| return; | |
| if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK)) | |
| fprintf(stderr, " # %10.3f CPUs ", | |
| avg / avg_stats(&walltime_nsecs_stats)); | |
| } | |
| static void abs_printout(int cpu, struct perf_evsel *evsel, double avg) | |
| { | |
| double total, ratio = 0.0; | |
| char cpustr[16] = { '\0', }; | |
| const char *fmt; | |
| if (csv_output) | |
| fmt = "%s%.0f%s%s"; | |
| else if (big_num) | |
| fmt = "%s%'18.0f%s%-24s"; | |
| else | |
| fmt = "%s%18.0f%s%-24s"; | |
| if (no_aggr) | |
| sprintf(cpustr, "CPU%*d%s", | |
| csv_output ? 0 : -4, | |
| evsel_list->cpus->map[cpu], csv_sep); | |
| else | |
| cpu = 0; | |
| fprintf(stderr, fmt, cpustr, avg, csv_sep, event_name(evsel)); | |
| if (evsel->cgrp) | |
| fprintf(stderr, "%s%s", csv_sep, evsel->cgrp->name); | |
| if (csv_output) | |
| return; | |
| if (perf_evsel__match(evsel, HARDWARE, HW_INSTRUCTIONS)) { | |
| total = avg_stats(&runtime_cycles_stats[cpu]); | |
| if (total) | |
| ratio = avg / total; | |
| fprintf(stderr, " # %10.3f IPC ", ratio); | |
| } else if (perf_evsel__match(evsel, HARDWARE, HW_BRANCH_MISSES) && | |
| runtime_branches_stats[cpu].n != 0) { | |
| total = avg_stats(&runtime_branches_stats[cpu]); | |
| if (total) | |
| ratio = avg * 100 / total; | |
| fprintf(stderr, " # %10.3f %% ", ratio); | |
| } else if (runtime_nsecs_stats[cpu].n != 0) { | |
| total = avg_stats(&runtime_nsecs_stats[cpu]); | |
| if (total) | |
| ratio = 1000.0 * avg / total; | |
| fprintf(stderr, " # %10.3f M/sec", ratio); | |
| } | |
| } | |
| /* | |
| * Print out the results of a single counter: | |
| * aggregated counts in system-wide mode | |
| */ | |
| static void print_counter_aggr(struct perf_evsel *counter) | |
| { | |
| struct perf_stat *ps = counter->priv; | |
| double avg = avg_stats(&ps->res_stats[0]); | |
| int scaled = counter->counts->scaled; | |
| if (scaled == -1) { | |
| fprintf(stderr, "%*s%s%*s", | |
| csv_output ? 0 : 18, | |
| "<not counted>", | |
| csv_sep, | |
| csv_output ? 0 : -24, | |
| event_name(counter)); | |
| if (counter->cgrp) | |
| fprintf(stderr, "%s%s", csv_sep, counter->cgrp->name); | |
| fputc('\n', stderr); | |
| return; | |
| } | |
| if (nsec_counter(counter)) | |
| nsec_printout(-1, counter, avg); | |
| else | |
| abs_printout(-1, counter, avg); | |
| if (csv_output) { | |
| fputc('\n', stderr); | |
| return; | |
| } | |
| print_noise(counter, avg); | |
| if (scaled) { | |
| double avg_enabled, avg_running; | |
| avg_enabled = avg_stats(&ps->res_stats[1]); | |
| avg_running = avg_stats(&ps->res_stats[2]); | |
| fprintf(stderr, " (scaled from %.2f%%)", | |
| 100 * avg_running / avg_enabled); | |
| } | |
| fprintf(stderr, "\n"); | |
| } | |
| /* | |
| * Print out the results of a single counter: | |
| * does not use aggregated count in system-wide | |
| */ | |
| static void print_counter(struct perf_evsel *counter) | |
| { | |
| u64 ena, run, val; | |
| int cpu; | |
| for (cpu = 0; cpu < evsel_list->cpus->nr; cpu++) { | |
| val = counter->counts->cpu[cpu].val; | |
| ena = counter->counts->cpu[cpu].ena; | |
| run = counter->counts->cpu[cpu].run; | |
| if (run == 0 || ena == 0) { | |
| fprintf(stderr, "CPU%*d%s%*s%s%*s", | |
| csv_output ? 0 : -4, | |
| evsel_list->cpus->map[cpu], csv_sep, | |
| csv_output ? 0 : 18, | |
| "<not counted>", csv_sep, | |
| csv_output ? 0 : -24, | |
| event_name(counter)); | |
| if (counter->cgrp) | |
| fprintf(stderr, "%s%s", csv_sep, counter->cgrp->name); | |
| fputc('\n', stderr); | |
| continue; | |
| } | |
| if (nsec_counter(counter)) | |
| nsec_printout(cpu, counter, val); | |
| else | |
| abs_printout(cpu, counter, val); | |
| if (!csv_output) { | |
| print_noise(counter, 1.0); | |
| if (run != ena) { | |
| fprintf(stderr, " (scaled from %.2f%%)", | |
| 100.0 * run / ena); | |
| } | |
| } | |
| fputc('\n', stderr); | |
| } | |
| } | |
| static void print_stat(int argc, const char **argv) | |
| { | |
| struct perf_evsel *counter; | |
| int i; | |
| fflush(stdout); | |
| if (!csv_output) { | |
| fprintf(stderr, "\n"); | |
| fprintf(stderr, " Performance counter stats for "); | |
| if(target_pid == -1 && target_tid == -1) { | |
| fprintf(stderr, "\'%s", argv[0]); | |
| for (i = 1; i < argc; i++) | |
| fprintf(stderr, " %s", argv[i]); | |
| } else if (target_pid != -1) | |
| fprintf(stderr, "process id \'%d", target_pid); | |
| else | |
| fprintf(stderr, "thread id \'%d", target_tid); | |
| fprintf(stderr, "\'"); | |
| if (run_count > 1) | |
| fprintf(stderr, " (%d runs)", run_count); | |
| fprintf(stderr, ":\n\n"); | |
| } | |
| if (no_aggr) { | |
| list_for_each_entry(counter, &evsel_list->entries, node) | |
| print_counter(counter); | |
| } else { | |
| list_for_each_entry(counter, &evsel_list->entries, node) | |
| print_counter_aggr(counter); | |
| } | |
| if (!csv_output) { | |
| fprintf(stderr, "\n"); | |
| fprintf(stderr, " %18.9f seconds time elapsed", | |
| avg_stats(&walltime_nsecs_stats)/1e9); | |
| if (run_count > 1) { | |
| fprintf(stderr, " ( +- %7.3f%% )", | |
| 100*stddev_stats(&walltime_nsecs_stats) / | |
| avg_stats(&walltime_nsecs_stats)); | |
| } | |
| fprintf(stderr, "\n\n"); | |
| } | |
| } | |
| static volatile int signr = -1; | |
| static void skip_signal(int signo) | |
| { | |
| if(child_pid == -1) | |
| done = 1; | |
| signr = signo; | |
| } | |
| static void sig_atexit(void) | |
| { | |
| if (child_pid != -1) | |
| kill(child_pid, SIGTERM); | |
| if (signr == -1) | |
| return; | |
| signal(signr, SIG_DFL); | |
| kill(getpid(), signr); | |
| } | |
| static const char * const stat_usage[] = { | |
| "perf stat [<options>] [<command>]", | |
| NULL | |
| }; | |
| static int stat__set_big_num(const struct option *opt __used, | |
| const char *s __used, int unset) | |
| { | |
| big_num_opt = unset ? 0 : 1; | |
| return 0; | |
| } | |
| static const struct option options[] = { | |
| OPT_CALLBACK('e', "event", &evsel_list, "event", | |
| "event selector. use 'perf list' to list available events", | |
| parse_events), | |
| OPT_CALLBACK(0, "filter", &evsel_list, "filter", | |
| "event filter", parse_filter), | |
| OPT_BOOLEAN('i', "no-inherit", &no_inherit, | |
| "child tasks do not inherit counters"), | |
| OPT_INTEGER('p', "pid", &target_pid, | |
| "stat events on existing process id"), | |
| OPT_INTEGER('t', "tid", &target_tid, | |
| "stat events on existing thread id"), | |
| OPT_BOOLEAN('a', "all-cpus", &system_wide, | |
| "system-wide collection from all CPUs"), | |
| OPT_BOOLEAN('c', "scale", &scale, | |
| "scale/normalize counters"), | |
| OPT_INCR('v', "verbose", &verbose, | |
| "be more verbose (show counter open errors, etc)"), | |
| OPT_INTEGER('r', "repeat", &run_count, | |
| "repeat command and print average + stddev (max: 100)"), | |
| OPT_BOOLEAN('n', "null", &null_run, | |
| "null run - dont start any counters"), | |
| OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, | |
| "print large numbers with thousands\' separators", | |
| stat__set_big_num), | |
| OPT_STRING('C', "cpu", &cpu_list, "cpu", | |
| "list of cpus to monitor in system-wide"), | |
| OPT_BOOLEAN('A', "no-aggr", &no_aggr, | |
| "disable CPU count aggregation"), | |
| OPT_STRING('x', "field-separator", &csv_sep, "separator", | |
| "print counts with custom separator"), | |
| OPT_CALLBACK('G', "cgroup", &evsel_list, "name", | |
| "monitor event in cgroup name only", | |
| parse_cgroups), | |
| OPT_END() | |
| }; | |
| int cmd_stat(int argc, const char **argv, const char *prefix __used) | |
| { | |
| struct perf_evsel *pos; | |
| int status = -ENOMEM; | |
| setlocale(LC_ALL, ""); | |
| evsel_list = perf_evlist__new(NULL, NULL); | |
| if (evsel_list == NULL) | |
| return -ENOMEM; | |
| argc = parse_options(argc, argv, options, stat_usage, | |
| PARSE_OPT_STOP_AT_NON_OPTION); | |
| if (csv_sep) | |
| csv_output = true; | |
| else | |
| csv_sep = DEFAULT_SEPARATOR; | |
| /* | |
| * let the spreadsheet do the pretty-printing | |
| */ | |
| if (csv_output) { | |
| /* User explicitely passed -B? */ | |
| if (big_num_opt == 1) { | |
| fprintf(stderr, "-B option not supported with -x\n"); | |
| usage_with_options(stat_usage, options); | |
| } else /* Nope, so disable big number formatting */ | |
| big_num = false; | |
| } else if (big_num_opt == 0) /* User passed --no-big-num */ | |
| big_num = false; | |
| if (!argc && target_pid == -1 && target_tid == -1) | |
| usage_with_options(stat_usage, options); | |
| if (run_count <= 0) | |
| usage_with_options(stat_usage, options); | |
| /* no_aggr, cgroup are for system-wide only */ | |
| if ((no_aggr || nr_cgroups) && !system_wide) { | |
| fprintf(stderr, "both cgroup and no-aggregation " | |
| "modes only available in system-wide mode\n"); | |
| usage_with_options(stat_usage, options); | |
| } | |
| /* Set attrs and nr_counters if no event is selected and !null_run */ | |
| if (!null_run && !evsel_list->nr_entries) { | |
| size_t c; | |
| for (c = 0; c < ARRAY_SIZE(default_attrs); ++c) { | |
| pos = perf_evsel__new(&default_attrs[c], c); | |
| if (pos == NULL) | |
| goto out; | |
| perf_evlist__add(evsel_list, pos); | |
| } | |
| } | |
| if (target_pid != -1) | |
| target_tid = target_pid; | |
| evsel_list->threads = thread_map__new(target_pid, target_tid); | |
| if (evsel_list->threads == NULL) { | |
| pr_err("Problems finding threads of monitor\n"); | |
| usage_with_options(stat_usage, options); | |
| } | |
| if (system_wide) | |
| evsel_list->cpus = cpu_map__new(cpu_list); | |
| else | |
| evsel_list->cpus = cpu_map__dummy_new(); | |
| if (evsel_list->cpus == NULL) { | |
| perror("failed to parse CPUs map"); | |
| usage_with_options(stat_usage, options); | |
| return -1; | |
| } | |
| list_for_each_entry(pos, &evsel_list->entries, node) { | |
| if (perf_evsel__alloc_stat_priv(pos) < 0 || | |
| perf_evsel__alloc_counts(pos, evsel_list->cpus->nr) < 0 || | |
| perf_evsel__alloc_fd(pos, evsel_list->cpus->nr, evsel_list->threads->nr) < 0) | |
| goto out_free_fd; | |
| } | |
| /* | |
| * We dont want to block the signals - that would cause | |
| * child tasks to inherit that and Ctrl-C would not work. | |
| * What we want is for Ctrl-C to work in the exec()-ed | |
| * task, but being ignored by perf stat itself: | |
| */ | |
| atexit(sig_atexit); | |
| signal(SIGINT, skip_signal); | |
| signal(SIGALRM, skip_signal); | |
| signal(SIGABRT, skip_signal); | |
| status = 0; | |
| for (run_idx = 0; run_idx < run_count; run_idx++) { | |
| if (run_count != 1 && verbose) | |
| fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1); | |
| status = run_perf_stat(argc, argv); | |
| } | |
| if (status != -1) | |
| print_stat(argc, argv); | |
| out_free_fd: | |
| list_for_each_entry(pos, &evsel_list->entries, node) | |
| perf_evsel__free_stat_priv(pos); | |
| perf_evlist__delete_maps(evsel_list); | |
| out: | |
| perf_evlist__delete(evsel_list); | |
| return status; | |
| } |