| /* | |
| * acpi.c - Architecture-Specific Low-Level ACPI Support | |
| * | |
| * Copyright (C) 1999 VA Linux Systems | |
| * Copyright (C) 1999,2000 Walt Drummond <drummond@valinux.com> | |
| * Copyright (C) 2000, 2002-2003 Hewlett-Packard Co. | |
| * David Mosberger-Tang <davidm@hpl.hp.com> | |
| * Copyright (C) 2000 Intel Corp. | |
| * Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com> | |
| * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| * Copyright (C) 2001 Jenna Hall <jenna.s.hall@intel.com> | |
| * Copyright (C) 2001 Takayoshi Kochi <t-kochi@bq.jp.nec.com> | |
| * Copyright (C) 2002 Erich Focht <efocht@ess.nec.de> | |
| * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com> | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/smp.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/irq.h> | |
| #include <linux/acpi.h> | |
| #include <linux/efi.h> | |
| #include <linux/mmzone.h> | |
| #include <linux/nodemask.h> | |
| #include <linux/slab.h> | |
| #include <acpi/processor.h> | |
| #include <asm/io.h> | |
| #include <asm/iosapic.h> | |
| #include <asm/machvec.h> | |
| #include <asm/page.h> | |
| #include <asm/system.h> | |
| #include <asm/numa.h> | |
| #include <asm/sal.h> | |
| #include <asm/cyclone.h> | |
| #include <asm/xen/hypervisor.h> | |
| #define BAD_MADT_ENTRY(entry, end) ( \ | |
| (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ | |
| ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) | |
| #define PREFIX "ACPI: " | |
| u32 acpi_rsdt_forced; | |
| unsigned int acpi_cpei_override; | |
| unsigned int acpi_cpei_phys_cpuid; | |
| unsigned long acpi_wakeup_address = 0; | |
| #ifdef CONFIG_IA64_GENERIC | |
| static unsigned long __init acpi_find_rsdp(void) | |
| { | |
| unsigned long rsdp_phys = 0; | |
| if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) | |
| rsdp_phys = efi.acpi20; | |
| else if (efi.acpi != EFI_INVALID_TABLE_ADDR) | |
| printk(KERN_WARNING PREFIX | |
| "v1.0/r0.71 tables no longer supported\n"); | |
| return rsdp_phys; | |
| } | |
| const char __init * | |
| acpi_get_sysname(void) | |
| { | |
| unsigned long rsdp_phys; | |
| struct acpi_table_rsdp *rsdp; | |
| struct acpi_table_xsdt *xsdt; | |
| struct acpi_table_header *hdr; | |
| #ifdef CONFIG_DMAR | |
| u64 i, nentries; | |
| #endif | |
| rsdp_phys = acpi_find_rsdp(); | |
| if (!rsdp_phys) { | |
| printk(KERN_ERR | |
| "ACPI 2.0 RSDP not found, default to \"dig\"\n"); | |
| return "dig"; | |
| } | |
| rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys); | |
| if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) { | |
| printk(KERN_ERR | |
| "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); | |
| return "dig"; | |
| } | |
| xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address); | |
| hdr = &xsdt->header; | |
| if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) { | |
| printk(KERN_ERR | |
| "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); | |
| return "dig"; | |
| } | |
| if (!strcmp(hdr->oem_id, "HP")) { | |
| return "hpzx1"; | |
| } else if (!strcmp(hdr->oem_id, "SGI")) { | |
| if (!strcmp(hdr->oem_table_id + 4, "UV")) | |
| return "uv"; | |
| else | |
| return "sn2"; | |
| } else if (xen_pv_domain() && !strcmp(hdr->oem_id, "XEN")) { | |
| return "xen"; | |
| } | |
| #ifdef CONFIG_DMAR | |
| /* Look for Intel IOMMU */ | |
| nentries = (hdr->length - sizeof(*hdr)) / | |
| sizeof(xsdt->table_offset_entry[0]); | |
| for (i = 0; i < nentries; i++) { | |
| hdr = __va(xsdt->table_offset_entry[i]); | |
| if (strncmp(hdr->signature, ACPI_SIG_DMAR, | |
| sizeof(ACPI_SIG_DMAR) - 1) == 0) | |
| return "dig_vtd"; | |
| } | |
| #endif | |
| return "dig"; | |
| } | |
| #endif /* CONFIG_IA64_GENERIC */ | |
| #define ACPI_MAX_PLATFORM_INTERRUPTS 256 | |
| /* Array to record platform interrupt vectors for generic interrupt routing. */ | |
| int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = { | |
| [0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1 | |
| }; | |
| enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; | |
| /* | |
| * Interrupt routing API for device drivers. Provides interrupt vector for | |
| * a generic platform event. Currently only CPEI is implemented. | |
| */ | |
| int acpi_request_vector(u32 int_type) | |
| { | |
| int vector = -1; | |
| if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) { | |
| /* corrected platform error interrupt */ | |
| vector = platform_intr_list[int_type]; | |
| } else | |
| printk(KERN_ERR | |
| "acpi_request_vector(): invalid interrupt type\n"); | |
| return vector; | |
| } | |
| char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size) | |
| { | |
| return __va(phys_addr); | |
| } | |
| void __init __acpi_unmap_table(char *map, unsigned long size) | |
| { | |
| } | |
| /* -------------------------------------------------------------------------- | |
| Boot-time Table Parsing | |
| -------------------------------------------------------------------------- */ | |
| static int available_cpus __initdata; | |
| struct acpi_table_madt *acpi_madt __initdata; | |
| static u8 has_8259; | |
| static int __init | |
| acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, | |
| const unsigned long end) | |
| { | |
| struct acpi_madt_local_apic_override *lapic; | |
| lapic = (struct acpi_madt_local_apic_override *)header; | |
| if (BAD_MADT_ENTRY(lapic, end)) | |
| return -EINVAL; | |
| if (lapic->address) { | |
| iounmap(ipi_base_addr); | |
| ipi_base_addr = ioremap(lapic->address, 0); | |
| } | |
| return 0; | |
| } | |
| static int __init | |
| acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end) | |
| { | |
| struct acpi_madt_local_sapic *lsapic; | |
| lsapic = (struct acpi_madt_local_sapic *)header; | |
| /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */ | |
| if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { | |
| #ifdef CONFIG_SMP | |
| smp_boot_data.cpu_phys_id[available_cpus] = | |
| (lsapic->id << 8) | lsapic->eid; | |
| #endif | |
| ++available_cpus; | |
| } | |
| total_cpus++; | |
| return 0; | |
| } | |
| static int __init | |
| acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) | |
| { | |
| struct acpi_madt_local_apic_nmi *lacpi_nmi; | |
| lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header; | |
| if (BAD_MADT_ENTRY(lacpi_nmi, end)) | |
| return -EINVAL; | |
| /* TBD: Support lapic_nmi entries */ | |
| return 0; | |
| } | |
| static int __init | |
| acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end) | |
| { | |
| struct acpi_madt_io_sapic *iosapic; | |
| iosapic = (struct acpi_madt_io_sapic *)header; | |
| if (BAD_MADT_ENTRY(iosapic, end)) | |
| return -EINVAL; | |
| return iosapic_init(iosapic->address, iosapic->global_irq_base); | |
| } | |
| static unsigned int __initdata acpi_madt_rev; | |
| static int __init | |
| acpi_parse_plat_int_src(struct acpi_subtable_header * header, | |
| const unsigned long end) | |
| { | |
| struct acpi_madt_interrupt_source *plintsrc; | |
| int vector; | |
| plintsrc = (struct acpi_madt_interrupt_source *)header; | |
| if (BAD_MADT_ENTRY(plintsrc, end)) | |
| return -EINVAL; | |
| /* | |
| * Get vector assignment for this interrupt, set attributes, | |
| * and program the IOSAPIC routing table. | |
| */ | |
| vector = iosapic_register_platform_intr(plintsrc->type, | |
| plintsrc->global_irq, | |
| plintsrc->io_sapic_vector, | |
| plintsrc->eid, | |
| plintsrc->id, | |
| ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) == | |
| ACPI_MADT_POLARITY_ACTIVE_HIGH) ? | |
| IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, | |
| ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) == | |
| ACPI_MADT_TRIGGER_EDGE) ? | |
| IOSAPIC_EDGE : IOSAPIC_LEVEL); | |
| platform_intr_list[plintsrc->type] = vector; | |
| if (acpi_madt_rev > 1) { | |
| acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE; | |
| } | |
| /* | |
| * Save the physical id, so we can check when its being removed | |
| */ | |
| acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff; | |
| return 0; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| unsigned int can_cpei_retarget(void) | |
| { | |
| extern int cpe_vector; | |
| extern unsigned int force_cpei_retarget; | |
| /* | |
| * Only if CPEI is supported and the override flag | |
| * is present, otherwise return that its re-targettable | |
| * if we are in polling mode. | |
| */ | |
| if (cpe_vector > 0) { | |
| if (acpi_cpei_override || force_cpei_retarget) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| unsigned int is_cpu_cpei_target(unsigned int cpu) | |
| { | |
| unsigned int logical_id; | |
| logical_id = cpu_logical_id(acpi_cpei_phys_cpuid); | |
| if (logical_id == cpu) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| void set_cpei_target_cpu(unsigned int cpu) | |
| { | |
| acpi_cpei_phys_cpuid = cpu_physical_id(cpu); | |
| } | |
| #endif | |
| unsigned int get_cpei_target_cpu(void) | |
| { | |
| return acpi_cpei_phys_cpuid; | |
| } | |
| static int __init | |
| acpi_parse_int_src_ovr(struct acpi_subtable_header * header, | |
| const unsigned long end) | |
| { | |
| struct acpi_madt_interrupt_override *p; | |
| p = (struct acpi_madt_interrupt_override *)header; | |
| if (BAD_MADT_ENTRY(p, end)) | |
| return -EINVAL; | |
| iosapic_override_isa_irq(p->source_irq, p->global_irq, | |
| ((p->inti_flags & ACPI_MADT_POLARITY_MASK) == | |
| ACPI_MADT_POLARITY_ACTIVE_HIGH) ? | |
| IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, | |
| ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) == | |
| ACPI_MADT_TRIGGER_EDGE) ? | |
| IOSAPIC_EDGE : IOSAPIC_LEVEL); | |
| return 0; | |
| } | |
| static int __init | |
| acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) | |
| { | |
| struct acpi_madt_nmi_source *nmi_src; | |
| nmi_src = (struct acpi_madt_nmi_source *)header; | |
| if (BAD_MADT_ENTRY(nmi_src, end)) | |
| return -EINVAL; | |
| /* TBD: Support nimsrc entries */ | |
| return 0; | |
| } | |
| static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) | |
| { | |
| if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { | |
| /* | |
| * Unfortunately ITC_DRIFT is not yet part of the | |
| * official SAL spec, so the ITC_DRIFT bit is not | |
| * set by the BIOS on this hardware. | |
| */ | |
| sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT; | |
| cyclone_setup(); | |
| } | |
| } | |
| static int __init acpi_parse_madt(struct acpi_table_header *table) | |
| { | |
| if (!table) | |
| return -EINVAL; | |
| acpi_madt = (struct acpi_table_madt *)table; | |
| acpi_madt_rev = acpi_madt->header.revision; | |
| /* remember the value for reference after free_initmem() */ | |
| #ifdef CONFIG_ITANIUM | |
| has_8259 = 1; /* Firmware on old Itanium systems is broken */ | |
| #else | |
| has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT; | |
| #endif | |
| iosapic_system_init(has_8259); | |
| /* Get base address of IPI Message Block */ | |
| if (acpi_madt->address) | |
| ipi_base_addr = ioremap(acpi_madt->address, 0); | |
| printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); | |
| acpi_madt_oem_check(acpi_madt->header.oem_id, | |
| acpi_madt->header.oem_table_id); | |
| return 0; | |
| } | |
| #ifdef CONFIG_ACPI_NUMA | |
| #undef SLIT_DEBUG | |
| #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) | |
| static int __initdata srat_num_cpus; /* number of cpus */ | |
| static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; | |
| #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) | |
| #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) | |
| static struct acpi_table_slit __initdata *slit_table; | |
| cpumask_t early_cpu_possible_map = CPU_MASK_NONE; | |
| static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa) | |
| { | |
| int pxm; | |
| pxm = pa->proximity_domain_lo; | |
| if (ia64_platform_is("sn2")) | |
| pxm += pa->proximity_domain_hi[0] << 8; | |
| return pxm; | |
| } | |
| static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma) | |
| { | |
| int pxm; | |
| pxm = ma->proximity_domain; | |
| if (!ia64_platform_is("sn2")) | |
| pxm &= 0xff; | |
| return pxm; | |
| } | |
| /* | |
| * ACPI 2.0 SLIT (System Locality Information Table) | |
| * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf | |
| */ | |
| void __init acpi_numa_slit_init(struct acpi_table_slit *slit) | |
| { | |
| u32 len; | |
| len = sizeof(struct acpi_table_header) + 8 | |
| + slit->locality_count * slit->locality_count; | |
| if (slit->header.length != len) { | |
| printk(KERN_ERR | |
| "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", | |
| len, slit->header.length); | |
| return; | |
| } | |
| slit_table = slit; | |
| } | |
| void __init | |
| acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) | |
| { | |
| int pxm; | |
| if (!(pa->flags & ACPI_SRAT_CPU_ENABLED)) | |
| return; | |
| if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) { | |
| printk_once(KERN_WARNING | |
| "node_cpuid[%ld] is too small, may not be able to use all cpus\n", | |
| ARRAY_SIZE(node_cpuid)); | |
| return; | |
| } | |
| pxm = get_processor_proximity_domain(pa); | |
| /* record this node in proximity bitmap */ | |
| pxm_bit_set(pxm); | |
| node_cpuid[srat_num_cpus].phys_id = | |
| (pa->apic_id << 8) | (pa->local_sapic_eid); | |
| /* nid should be overridden as logical node id later */ | |
| node_cpuid[srat_num_cpus].nid = pxm; | |
| cpu_set(srat_num_cpus, early_cpu_possible_map); | |
| srat_num_cpus++; | |
| } | |
| void __init | |
| acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) | |
| { | |
| unsigned long paddr, size; | |
| int pxm; | |
| struct node_memblk_s *p, *q, *pend; | |
| pxm = get_memory_proximity_domain(ma); | |
| /* fill node memory chunk structure */ | |
| paddr = ma->base_address; | |
| size = ma->length; | |
| /* Ignore disabled entries */ | |
| if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) | |
| return; | |
| /* record this node in proximity bitmap */ | |
| pxm_bit_set(pxm); | |
| /* Insertion sort based on base address */ | |
| pend = &node_memblk[num_node_memblks]; | |
| for (p = &node_memblk[0]; p < pend; p++) { | |
| if (paddr < p->start_paddr) | |
| break; | |
| } | |
| if (p < pend) { | |
| for (q = pend - 1; q >= p; q--) | |
| *(q + 1) = *q; | |
| } | |
| p->start_paddr = paddr; | |
| p->size = size; | |
| p->nid = pxm; | |
| num_node_memblks++; | |
| } | |
| void __init acpi_numa_arch_fixup(void) | |
| { | |
| int i, j, node_from, node_to; | |
| /* If there's no SRAT, fix the phys_id and mark node 0 online */ | |
| if (srat_num_cpus == 0) { | |
| node_set_online(0); | |
| node_cpuid[0].phys_id = hard_smp_processor_id(); | |
| return; | |
| } | |
| /* | |
| * MCD - This can probably be dropped now. No need for pxm ID to node ID | |
| * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES. | |
| */ | |
| nodes_clear(node_online_map); | |
| for (i = 0; i < MAX_PXM_DOMAINS; i++) { | |
| if (pxm_bit_test(i)) { | |
| int nid = acpi_map_pxm_to_node(i); | |
| node_set_online(nid); | |
| } | |
| } | |
| /* set logical node id in memory chunk structure */ | |
| for (i = 0; i < num_node_memblks; i++) | |
| node_memblk[i].nid = pxm_to_node(node_memblk[i].nid); | |
| /* assign memory bank numbers for each chunk on each node */ | |
| for_each_online_node(i) { | |
| int bank; | |
| bank = 0; | |
| for (j = 0; j < num_node_memblks; j++) | |
| if (node_memblk[j].nid == i) | |
| node_memblk[j].bank = bank++; | |
| } | |
| /* set logical node id in cpu structure */ | |
| for_each_possible_early_cpu(i) | |
| node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid); | |
| printk(KERN_INFO "Number of logical nodes in system = %d\n", | |
| num_online_nodes()); | |
| printk(KERN_INFO "Number of memory chunks in system = %d\n", | |
| num_node_memblks); | |
| if (!slit_table) { | |
| for (i = 0; i < MAX_NUMNODES; i++) | |
| for (j = 0; j < MAX_NUMNODES; j++) | |
| node_distance(i, j) = i == j ? LOCAL_DISTANCE : | |
| REMOTE_DISTANCE; | |
| return; | |
| } | |
| memset(numa_slit, -1, sizeof(numa_slit)); | |
| for (i = 0; i < slit_table->locality_count; i++) { | |
| if (!pxm_bit_test(i)) | |
| continue; | |
| node_from = pxm_to_node(i); | |
| for (j = 0; j < slit_table->locality_count; j++) { | |
| if (!pxm_bit_test(j)) | |
| continue; | |
| node_to = pxm_to_node(j); | |
| node_distance(node_from, node_to) = | |
| slit_table->entry[i * slit_table->locality_count + j]; | |
| } | |
| } | |
| #ifdef SLIT_DEBUG | |
| printk("ACPI 2.0 SLIT locality table:\n"); | |
| for_each_online_node(i) { | |
| for_each_online_node(j) | |
| printk("%03d ", node_distance(i, j)); | |
| printk("\n"); | |
| } | |
| #endif | |
| } | |
| #endif /* CONFIG_ACPI_NUMA */ | |
| /* | |
| * success: return IRQ number (>=0) | |
| * failure: return < 0 | |
| */ | |
| int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity) | |
| { | |
| if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) | |
| return gsi; | |
| if (has_8259 && gsi < 16) | |
| return isa_irq_to_vector(gsi); | |
| return iosapic_register_intr(gsi, | |
| (polarity == | |
| ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : | |
| IOSAPIC_POL_LOW, | |
| (triggering == | |
| ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : | |
| IOSAPIC_LEVEL); | |
| } | |
| void acpi_unregister_gsi(u32 gsi) | |
| { | |
| if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM) | |
| return; | |
| if (has_8259 && gsi < 16) | |
| return; | |
| iosapic_unregister_intr(gsi); | |
| } | |
| static int __init acpi_parse_fadt(struct acpi_table_header *table) | |
| { | |
| struct acpi_table_header *fadt_header; | |
| struct acpi_table_fadt *fadt; | |
| if (!table) | |
| return -EINVAL; | |
| fadt_header = (struct acpi_table_header *)table; | |
| if (fadt_header->revision != 3) | |
| return -ENODEV; /* Only deal with ACPI 2.0 FADT */ | |
| fadt = (struct acpi_table_fadt *)fadt_header; | |
| acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, | |
| ACPI_ACTIVE_LOW); | |
| return 0; | |
| } | |
| int __init early_acpi_boot_init(void) | |
| { | |
| int ret; | |
| /* | |
| * do a partial walk of MADT to determine how many CPUs | |
| * we have including offline CPUs | |
| */ | |
| if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { | |
| printk(KERN_ERR PREFIX "Can't find MADT\n"); | |
| return 0; | |
| } | |
| ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, | |
| acpi_parse_lsapic, NR_CPUS); | |
| if (ret < 1) | |
| printk(KERN_ERR PREFIX | |
| "Error parsing MADT - no LAPIC entries\n"); | |
| #ifdef CONFIG_SMP | |
| if (available_cpus == 0) { | |
| printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); | |
| printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); | |
| smp_boot_data.cpu_phys_id[available_cpus] = | |
| hard_smp_processor_id(); | |
| available_cpus = 1; /* We've got at least one of these, no? */ | |
| } | |
| smp_boot_data.cpu_count = available_cpus; | |
| #endif | |
| /* Make boot-up look pretty */ | |
| printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, | |
| total_cpus); | |
| return 0; | |
| } | |
| int __init acpi_boot_init(void) | |
| { | |
| /* | |
| * MADT | |
| * ---- | |
| * Parse the Multiple APIC Description Table (MADT), if exists. | |
| * Note that this table provides platform SMP configuration | |
| * information -- the successor to MPS tables. | |
| */ | |
| if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { | |
| printk(KERN_ERR PREFIX "Can't find MADT\n"); | |
| goto skip_madt; | |
| } | |
| /* Local APIC */ | |
| if (acpi_table_parse_madt | |
| (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0) | |
| printk(KERN_ERR PREFIX | |
| "Error parsing LAPIC address override entry\n"); | |
| if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) | |
| < 0) | |
| printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); | |
| /* I/O APIC */ | |
| if (acpi_table_parse_madt | |
| (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) { | |
| if (!ia64_platform_is("sn2")) | |
| printk(KERN_ERR PREFIX | |
| "Error parsing MADT - no IOSAPIC entries\n"); | |
| } | |
| /* System-Level Interrupt Routing */ | |
| if (acpi_table_parse_madt | |
| (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src, | |
| ACPI_MAX_PLATFORM_INTERRUPTS) < 0) | |
| printk(KERN_ERR PREFIX | |
| "Error parsing platform interrupt source entry\n"); | |
| if (acpi_table_parse_madt | |
| (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0) | |
| printk(KERN_ERR PREFIX | |
| "Error parsing interrupt source overrides entry\n"); | |
| if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0) | |
| printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); | |
| skip_madt: | |
| /* | |
| * FADT says whether a legacy keyboard controller is present. | |
| * The FADT also contains an SCI_INT line, by which the system | |
| * gets interrupts such as power and sleep buttons. If it's not | |
| * on a Legacy interrupt, it needs to be setup. | |
| */ | |
| if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) | |
| printk(KERN_ERR PREFIX "Can't find FADT\n"); | |
| #ifdef CONFIG_ACPI_NUMA | |
| #ifdef CONFIG_SMP | |
| if (srat_num_cpus == 0) { | |
| int cpu, i = 1; | |
| for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) | |
| if (smp_boot_data.cpu_phys_id[cpu] != | |
| hard_smp_processor_id()) | |
| node_cpuid[i++].phys_id = | |
| smp_boot_data.cpu_phys_id[cpu]; | |
| } | |
| #endif | |
| build_cpu_to_node_map(); | |
| #endif | |
| return 0; | |
| } | |
| int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) | |
| { | |
| int tmp; | |
| if (has_8259 && gsi < 16) | |
| *irq = isa_irq_to_vector(gsi); | |
| else { | |
| tmp = gsi_to_irq(gsi); | |
| if (tmp == -1) | |
| return -1; | |
| *irq = tmp; | |
| } | |
| return 0; | |
| } | |
| int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi) | |
| { | |
| if (isa_irq >= 16) | |
| return -1; | |
| *gsi = isa_irq; | |
| return 0; | |
| } | |
| /* | |
| * ACPI based hotplug CPU support | |
| */ | |
| #ifdef CONFIG_ACPI_HOTPLUG_CPU | |
| static | |
| int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) | |
| { | |
| #ifdef CONFIG_ACPI_NUMA | |
| int pxm_id; | |
| int nid; | |
| pxm_id = acpi_get_pxm(handle); | |
| /* | |
| * We don't have cpu-only-node hotadd. But if the system equips | |
| * SRAT table, pxm is already found and node is ready. | |
| * So, just pxm_to_nid(pxm) is OK. | |
| * This code here is for the system which doesn't have full SRAT | |
| * table for possible cpus. | |
| */ | |
| nid = acpi_map_pxm_to_node(pxm_id); | |
| node_cpuid[cpu].phys_id = physid; | |
| node_cpuid[cpu].nid = nid; | |
| #endif | |
| return (0); | |
| } | |
| int additional_cpus __initdata = -1; | |
| static __init int setup_additional_cpus(char *s) | |
| { | |
| if (s) | |
| additional_cpus = simple_strtol(s, NULL, 0); | |
| return 0; | |
| } | |
| early_param("additional_cpus", setup_additional_cpus); | |
| /* | |
| * cpu_possible_map should be static, it cannot change as CPUs | |
| * are onlined, or offlined. The reason is per-cpu data-structures | |
| * are allocated by some modules at init time, and dont expect to | |
| * do this dynamically on cpu arrival/departure. | |
| * cpu_present_map on the other hand can change dynamically. | |
| * In case when cpu_hotplug is not compiled, then we resort to current | |
| * behaviour, which is cpu_possible == cpu_present. | |
| * - Ashok Raj | |
| * | |
| * Three ways to find out the number of additional hotplug CPUs: | |
| * - If the BIOS specified disabled CPUs in ACPI/mptables use that. | |
| * - The user can overwrite it with additional_cpus=NUM | |
| * - Otherwise don't reserve additional CPUs. | |
| */ | |
| __init void prefill_possible_map(void) | |
| { | |
| int i; | |
| int possible, disabled_cpus; | |
| disabled_cpus = total_cpus - available_cpus; | |
| if (additional_cpus == -1) { | |
| if (disabled_cpus > 0) | |
| additional_cpus = disabled_cpus; | |
| else | |
| additional_cpus = 0; | |
| } | |
| possible = available_cpus + additional_cpus; | |
| if (possible > nr_cpu_ids) | |
| possible = nr_cpu_ids; | |
| printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", | |
| possible, max((possible - available_cpus), 0)); | |
| for (i = 0; i < possible; i++) | |
| set_cpu_possible(i, true); | |
| } | |
| int acpi_map_lsapic(acpi_handle handle, int *pcpu) | |
| { | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| union acpi_object *obj; | |
| struct acpi_madt_local_sapic *lsapic; | |
| cpumask_t tmp_map; | |
| int cpu, physid; | |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) | |
| return -EINVAL; | |
| if (!buffer.length || !buffer.pointer) | |
| return -EINVAL; | |
| obj = buffer.pointer; | |
| if (obj->type != ACPI_TYPE_BUFFER) | |
| { | |
| kfree(buffer.pointer); | |
| return -EINVAL; | |
| } | |
| lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer; | |
| if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) || | |
| (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))) { | |
| kfree(buffer.pointer); | |
| return -EINVAL; | |
| } | |
| physid = ((lsapic->id << 8) | (lsapic->eid)); | |
| kfree(buffer.pointer); | |
| buffer.length = ACPI_ALLOCATE_BUFFER; | |
| buffer.pointer = NULL; | |
| cpumask_complement(&tmp_map, cpu_present_mask); | |
| cpu = cpumask_first(&tmp_map); | |
| if (cpu >= nr_cpu_ids) | |
| return -EINVAL; | |
| acpi_map_cpu2node(handle, cpu, physid); | |
| cpu_set(cpu, cpu_present_map); | |
| ia64_cpu_to_sapicid[cpu] = physid; | |
| acpi_processor_set_pdc(handle); | |
| *pcpu = cpu; | |
| return (0); | |
| } | |
| EXPORT_SYMBOL(acpi_map_lsapic); | |
| int acpi_unmap_lsapic(int cpu) | |
| { | |
| ia64_cpu_to_sapicid[cpu] = -1; | |
| cpu_clear(cpu, cpu_present_map); | |
| #ifdef CONFIG_ACPI_NUMA | |
| /* NUMA specific cleanup's */ | |
| #endif | |
| return (0); | |
| } | |
| EXPORT_SYMBOL(acpi_unmap_lsapic); | |
| #endif /* CONFIG_ACPI_HOTPLUG_CPU */ | |
| #ifdef CONFIG_ACPI_NUMA | |
| static acpi_status __devinit | |
| acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) | |
| { | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| union acpi_object *obj; | |
| struct acpi_madt_io_sapic *iosapic; | |
| unsigned int gsi_base; | |
| int pxm, node; | |
| /* Only care about objects w/ a method that returns the MADT */ | |
| if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) | |
| return AE_OK; | |
| if (!buffer.length || !buffer.pointer) | |
| return AE_OK; | |
| obj = buffer.pointer; | |
| if (obj->type != ACPI_TYPE_BUFFER || | |
| obj->buffer.length < sizeof(*iosapic)) { | |
| kfree(buffer.pointer); | |
| return AE_OK; | |
| } | |
| iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer; | |
| if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) { | |
| kfree(buffer.pointer); | |
| return AE_OK; | |
| } | |
| gsi_base = iosapic->global_irq_base; | |
| kfree(buffer.pointer); | |
| /* | |
| * OK, it's an IOSAPIC MADT entry, look for a _PXM value to tell | |
| * us which node to associate this with. | |
| */ | |
| pxm = acpi_get_pxm(handle); | |
| if (pxm < 0) | |
| return AE_OK; | |
| node = pxm_to_node(pxm); | |
| if (node >= MAX_NUMNODES || !node_online(node) || | |
| cpumask_empty(cpumask_of_node(node))) | |
| return AE_OK; | |
| /* We know a gsi to node mapping! */ | |
| map_iosapic_to_node(gsi_base, node); | |
| return AE_OK; | |
| } | |
| static int __init | |
| acpi_map_iosapics (void) | |
| { | |
| acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); | |
| return 0; | |
| } | |
| fs_initcall(acpi_map_iosapics); | |
| #endif /* CONFIG_ACPI_NUMA */ | |
| int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) | |
| { | |
| int err; | |
| if ((err = iosapic_init(phys_addr, gsi_base))) | |
| return err; | |
| #ifdef CONFIG_ACPI_NUMA | |
| acpi_map_iosapic(handle, 0, NULL, NULL); | |
| #endif /* CONFIG_ACPI_NUMA */ | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(acpi_register_ioapic); | |
| int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) | |
| { | |
| return iosapic_remove(gsi_base); | |
| } | |
| EXPORT_SYMBOL(acpi_unregister_ioapic); | |
| /* | |
| * acpi_save_state_mem() - save kernel state | |
| * | |
| * TBD when when IA64 starts to support suspend... | |
| */ | |
| int acpi_save_state_mem(void) { return 0; } | |
| /* | |
| * acpi_restore_state() | |
| */ | |
| void acpi_restore_state_mem(void) {} | |
| /* | |
| * do_suspend_lowlevel() | |
| */ | |
| void do_suspend_lowlevel(void) {} |