| /* |
| * drivers/net/ibm_emac/ibm_emac_core.c |
| * |
| * Driver for PowerPC 4xx on-chip ethernet controller. |
| * |
| * Copyright (c) 2004, 2005 Zultys Technologies. |
| * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| * |
| * Based on original work by |
| * Matt Porter <mporter@kernel.crashing.org> |
| * (c) 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org> |
| * Armin Kuster <akuster@mvista.com> |
| * Johnnie Peters <jpeters@mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/crc32.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/uaccess.h> |
| #include <asm/ocp.h> |
| |
| #include "ibm_emac_core.h" |
| #include "ibm_emac_debug.h" |
| |
| /* |
| * Lack of dma_unmap_???? calls is intentional. |
| * |
| * API-correct usage requires additional support state information to be |
| * maintained for every RX and TX buffer descriptor (BD). Unfortunately, due to |
| * EMAC design (e.g. TX buffer passed from network stack can be split into |
| * several BDs, dma_map_single/dma_map_page can be used to map particular BD), |
| * maintaining such information will add additional overhead. |
| * Current DMA API implementation for 4xx processors only ensures cache coherency |
| * and dma_unmap_???? routines are empty and are likely to stay this way. |
| * I decided to omit dma_unmap_??? calls because I don't want to add additional |
| * complexity just for the sake of following some abstract API, when it doesn't |
| * add any real benefit to the driver. I understand that this decision maybe |
| * controversial, but I really tried to make code API-correct and efficient |
| * at the same time and didn't come up with code I liked :(. --ebs |
| */ |
| |
| #define DRV_NAME "emac" |
| #define DRV_VERSION "3.54" |
| #define DRV_DESC "PPC 4xx OCP EMAC driver" |
| |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_AUTHOR |
| ("Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>"); |
| MODULE_LICENSE("GPL"); |
| |
| /* minimum number of free TX descriptors required to wake up TX process */ |
| #define EMAC_TX_WAKEUP_THRESH (NUM_TX_BUFF / 4) |
| |
| /* If packet size is less than this number, we allocate small skb and copy packet |
| * contents into it instead of just sending original big skb up |
| */ |
| #define EMAC_RX_COPY_THRESH CONFIG_IBM_EMAC_RX_COPY_THRESHOLD |
| |
| /* Since multiple EMACs share MDIO lines in various ways, we need |
| * to avoid re-using the same PHY ID in cases where the arch didn't |
| * setup precise phy_map entries |
| */ |
| static u32 busy_phy_map; |
| |
| #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \ |
| (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)) |
| /* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us |
| * with PHY RX clock problem. |
| * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which |
| * also allows controlling each EMAC clock |
| */ |
| static inline void EMAC_RX_CLK_TX(int idx) |
| { |
| unsigned long flags; |
| local_irq_save(flags); |
| |
| #if defined(CONFIG_405EP) |
| mtdcr(0xf3, mfdcr(0xf3) | (1 << idx)); |
| #else /* CONFIG_440EP || CONFIG_440GR */ |
| SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx)); |
| #endif |
| |
| local_irq_restore(flags); |
| } |
| |
| static inline void EMAC_RX_CLK_DEFAULT(int idx) |
| { |
| unsigned long flags; |
| local_irq_save(flags); |
| |
| #if defined(CONFIG_405EP) |
| mtdcr(0xf3, mfdcr(0xf3) & ~(1 << idx)); |
| #else /* CONFIG_440EP */ |
| SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~(0x08000000 >> idx)); |
| #endif |
| |
| local_irq_restore(flags); |
| } |
| #else |
| #define EMAC_RX_CLK_TX(idx) ((void)0) |
| #define EMAC_RX_CLK_DEFAULT(idx) ((void)0) |
| #endif |
| |
| #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && defined(CONFIG_440GX) |
| /* We can switch Ethernet clock to the internal source through SDR0_MFR[ECS], |
| * unfortunately this is less flexible than 440EP case, because it's a global |
| * setting for all EMACs, therefore we do this clock trick only during probe. |
| */ |
| #define EMAC_CLK_INTERNAL SDR_WRITE(DCRN_SDR_MFR, \ |
| SDR_READ(DCRN_SDR_MFR) | 0x08000000) |
| #define EMAC_CLK_EXTERNAL SDR_WRITE(DCRN_SDR_MFR, \ |
| SDR_READ(DCRN_SDR_MFR) & ~0x08000000) |
| #else |
| #define EMAC_CLK_INTERNAL ((void)0) |
| #define EMAC_CLK_EXTERNAL ((void)0) |
| #endif |
| |
| /* I don't want to litter system log with timeout errors |
| * when we have brain-damaged PHY. |
| */ |
| static inline void emac_report_timeout_error(struct ocp_enet_private *dev, |
| const char *error) |
| { |
| #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) |
| DBG("%d: %s" NL, dev->def->index, error); |
| #else |
| if (net_ratelimit()) |
| printk(KERN_ERR "emac%d: %s\n", dev->def->index, error); |
| #endif |
| } |
| |
| /* PHY polling intervals */ |
| #define PHY_POLL_LINK_ON HZ |
| #define PHY_POLL_LINK_OFF (HZ / 5) |
| |
| /* Graceful stop timeouts in us. |
| * We should allow up to 1 frame time (full-duplex, ignoring collisions) |
| */ |
| #define STOP_TIMEOUT_10 1230 |
| #define STOP_TIMEOUT_100 124 |
| #define STOP_TIMEOUT_1000 13 |
| #define STOP_TIMEOUT_1000_JUMBO 73 |
| |
| /* Please, keep in sync with struct ibm_emac_stats/ibm_emac_error_stats */ |
| static const char emac_stats_keys[EMAC_ETHTOOL_STATS_COUNT][ETH_GSTRING_LEN] = { |
| "rx_packets", "rx_bytes", "tx_packets", "tx_bytes", "rx_packets_csum", |
| "tx_packets_csum", "tx_undo", "rx_dropped_stack", "rx_dropped_oom", |
| "rx_dropped_error", "rx_dropped_resize", "rx_dropped_mtu", |
| "rx_stopped", "rx_bd_errors", "rx_bd_overrun", "rx_bd_bad_packet", |
| "rx_bd_runt_packet", "rx_bd_short_event", "rx_bd_alignment_error", |
| "rx_bd_bad_fcs", "rx_bd_packet_too_long", "rx_bd_out_of_range", |
| "rx_bd_in_range", "rx_parity", "rx_fifo_overrun", "rx_overrun", |
| "rx_bad_packet", "rx_runt_packet", "rx_short_event", |
| "rx_alignment_error", "rx_bad_fcs", "rx_packet_too_long", |
| "rx_out_of_range", "rx_in_range", "tx_dropped", "tx_bd_errors", |
| "tx_bd_bad_fcs", "tx_bd_carrier_loss", "tx_bd_excessive_deferral", |
| "tx_bd_excessive_collisions", "tx_bd_late_collision", |
| "tx_bd_multple_collisions", "tx_bd_single_collision", |
| "tx_bd_underrun", "tx_bd_sqe", "tx_parity", "tx_underrun", "tx_sqe", |
| "tx_errors" |
| }; |
| |
| static irqreturn_t emac_irq(int irq, void *dev_instance); |
| static void emac_clean_tx_ring(struct ocp_enet_private *dev); |
| |
| static inline int emac_phy_supports_gige(int phy_mode) |
| { |
| return phy_mode == PHY_MODE_GMII || |
| phy_mode == PHY_MODE_RGMII || |
| phy_mode == PHY_MODE_TBI || |
| phy_mode == PHY_MODE_RTBI; |
| } |
| |
| static inline int emac_phy_gpcs(int phy_mode) |
| { |
| return phy_mode == PHY_MODE_TBI || |
| phy_mode == PHY_MODE_RTBI; |
| } |
| |
| static inline void emac_tx_enable(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| unsigned long flags; |
| u32 r; |
| |
| local_irq_save(flags); |
| |
| DBG("%d: tx_enable" NL, dev->def->index); |
| |
| r = in_be32(&p->mr0); |
| if (!(r & EMAC_MR0_TXE)) |
| out_be32(&p->mr0, r | EMAC_MR0_TXE); |
| local_irq_restore(flags); |
| } |
| |
| static void emac_tx_disable(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| unsigned long flags; |
| u32 r; |
| |
| local_irq_save(flags); |
| |
| DBG("%d: tx_disable" NL, dev->def->index); |
| |
| r = in_be32(&p->mr0); |
| if (r & EMAC_MR0_TXE) { |
| int n = dev->stop_timeout; |
| out_be32(&p->mr0, r & ~EMAC_MR0_TXE); |
| while (!(in_be32(&p->mr0) & EMAC_MR0_TXI) && n) { |
| udelay(1); |
| --n; |
| } |
| if (unlikely(!n)) |
| emac_report_timeout_error(dev, "TX disable timeout"); |
| } |
| local_irq_restore(flags); |
| } |
| |
| static void emac_rx_enable(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| unsigned long flags; |
| u32 r; |
| |
| local_irq_save(flags); |
| if (unlikely(dev->commac.rx_stopped)) |
| goto out; |
| |
| DBG("%d: rx_enable" NL, dev->def->index); |
| |
| r = in_be32(&p->mr0); |
| if (!(r & EMAC_MR0_RXE)) { |
| if (unlikely(!(r & EMAC_MR0_RXI))) { |
| /* Wait if previous async disable is still in progress */ |
| int n = dev->stop_timeout; |
| while (!(r = in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { |
| udelay(1); |
| --n; |
| } |
| if (unlikely(!n)) |
| emac_report_timeout_error(dev, |
| "RX disable timeout"); |
| } |
| out_be32(&p->mr0, r | EMAC_MR0_RXE); |
| } |
| out: |
| local_irq_restore(flags); |
| } |
| |
| static void emac_rx_disable(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| unsigned long flags; |
| u32 r; |
| |
| local_irq_save(flags); |
| |
| DBG("%d: rx_disable" NL, dev->def->index); |
| |
| r = in_be32(&p->mr0); |
| if (r & EMAC_MR0_RXE) { |
| int n = dev->stop_timeout; |
| out_be32(&p->mr0, r & ~EMAC_MR0_RXE); |
| while (!(in_be32(&p->mr0) & EMAC_MR0_RXI) && n) { |
| udelay(1); |
| --n; |
| } |
| if (unlikely(!n)) |
| emac_report_timeout_error(dev, "RX disable timeout"); |
| } |
| local_irq_restore(flags); |
| } |
| |
| static inline void emac_rx_disable_async(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| unsigned long flags; |
| u32 r; |
| |
| local_irq_save(flags); |
| |
| DBG("%d: rx_disable_async" NL, dev->def->index); |
| |
| r = in_be32(&p->mr0); |
| if (r & EMAC_MR0_RXE) |
| out_be32(&p->mr0, r & ~EMAC_MR0_RXE); |
| local_irq_restore(flags); |
| } |
| |
| static int emac_reset(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| unsigned long flags; |
| int n = 20; |
| |
| DBG("%d: reset" NL, dev->def->index); |
| |
| local_irq_save(flags); |
| |
| if (!dev->reset_failed) { |
| /* 40x erratum suggests stopping RX channel before reset, |
| * we stop TX as well |
| */ |
| emac_rx_disable(dev); |
| emac_tx_disable(dev); |
| } |
| |
| out_be32(&p->mr0, EMAC_MR0_SRST); |
| while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) |
| --n; |
| local_irq_restore(flags); |
| |
| if (n) { |
| dev->reset_failed = 0; |
| return 0; |
| } else { |
| emac_report_timeout_error(dev, "reset timeout"); |
| dev->reset_failed = 1; |
| return -ETIMEDOUT; |
| } |
| } |
| |
| static void emac_hash_mc(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u16 gaht[4] = { 0 }; |
| struct dev_mc_list *dmi; |
| |
| DBG("%d: hash_mc %d" NL, dev->def->index, dev->ndev->mc_count); |
| |
| for (dmi = dev->ndev->mc_list; dmi; dmi = dmi->next) { |
| int bit; |
| DBG2("%d: mc %02x:%02x:%02x:%02x:%02x:%02x" NL, |
| dev->def->index, |
| dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2], |
| dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]); |
| |
| bit = 63 - (ether_crc(ETH_ALEN, dmi->dmi_addr) >> 26); |
| gaht[bit >> 4] |= 0x8000 >> (bit & 0x0f); |
| } |
| out_be32(&p->gaht1, gaht[0]); |
| out_be32(&p->gaht2, gaht[1]); |
| out_be32(&p->gaht3, gaht[2]); |
| out_be32(&p->gaht4, gaht[3]); |
| } |
| |
| static inline u32 emac_iff2rmr(struct net_device *ndev) |
| { |
| u32 r = EMAC_RMR_SP | EMAC_RMR_SFCS | EMAC_RMR_IAE | EMAC_RMR_BAE | |
| EMAC_RMR_BASE; |
| |
| if (ndev->flags & IFF_PROMISC) |
| r |= EMAC_RMR_PME; |
| else if (ndev->flags & IFF_ALLMULTI || ndev->mc_count > 32) |
| r |= EMAC_RMR_PMME; |
| else if (ndev->mc_count > 0) |
| r |= EMAC_RMR_MAE; |
| |
| return r; |
| } |
| |
| static inline int emac_opb_mhz(void) |
| { |
| return (ocp_sys_info.opb_bus_freq + 500000) / 1000000; |
| } |
| |
| /* BHs disabled */ |
| static int emac_configure(struct ocp_enet_private *dev) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| struct net_device *ndev = dev->ndev; |
| int gige; |
| u32 r; |
| |
| DBG("%d: configure" NL, dev->def->index); |
| |
| if (emac_reset(dev) < 0) |
| return -ETIMEDOUT; |
| |
| tah_reset(dev->tah_dev); |
| |
| /* Mode register */ |
| r = EMAC_MR1_BASE(emac_opb_mhz()) | EMAC_MR1_VLE | EMAC_MR1_IST; |
| if (dev->phy.duplex == DUPLEX_FULL) |
| r |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001; |
| dev->stop_timeout = STOP_TIMEOUT_10; |
| switch (dev->phy.speed) { |
| case SPEED_1000: |
| if (emac_phy_gpcs(dev->phy.mode)) { |
| r |= EMAC_MR1_MF_1000GPCS | |
| EMAC_MR1_MF_IPPA(dev->phy.address); |
| |
| /* Put some arbitrary OUI, Manuf & Rev IDs so we can |
| * identify this GPCS PHY later. |
| */ |
| out_be32(&p->ipcr, 0xdeadbeef); |
| } else |
| r |= EMAC_MR1_MF_1000; |
| r |= EMAC_MR1_RFS_16K; |
| gige = 1; |
| |
| if (dev->ndev->mtu > ETH_DATA_LEN) { |
| r |= EMAC_MR1_JPSM; |
| dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO; |
| } else |
| dev->stop_timeout = STOP_TIMEOUT_1000; |
| break; |
| case SPEED_100: |
| r |= EMAC_MR1_MF_100; |
| dev->stop_timeout = STOP_TIMEOUT_100; |
| /* Fall through */ |
| default: |
| r |= EMAC_MR1_RFS_4K; |
| gige = 0; |
| break; |
| } |
| |
| if (dev->rgmii_dev) |
| rgmii_set_speed(dev->rgmii_dev, dev->rgmii_input, |
| dev->phy.speed); |
| else |
| zmii_set_speed(dev->zmii_dev, dev->zmii_input, dev->phy.speed); |
| |
| #if !defined(CONFIG_40x) |
| /* on 40x erratum forces us to NOT use integrated flow control, |
| * let's hope it works on 44x ;) |
| */ |
| if (dev->phy.duplex == DUPLEX_FULL) { |
| if (dev->phy.pause) |
| r |= EMAC_MR1_EIFC | EMAC_MR1_APP; |
| else if (dev->phy.asym_pause) |
| r |= EMAC_MR1_APP; |
| } |
| #endif |
| out_be32(&p->mr1, r); |
| |
| /* Set individual MAC address */ |
| out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); |
| out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | |
| (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | |
| ndev->dev_addr[5]); |
| |
| /* VLAN Tag Protocol ID */ |
| out_be32(&p->vtpid, 0x8100); |
| |
| /* Receive mode register */ |
| r = emac_iff2rmr(ndev); |
| if (r & EMAC_RMR_MAE) |
| emac_hash_mc(dev); |
| out_be32(&p->rmr, r); |
| |
| /* FIFOs thresholds */ |
| r = EMAC_TMR1((EMAC_MAL_BURST_SIZE / EMAC_FIFO_ENTRY_SIZE) + 1, |
| EMAC_TX_FIFO_SIZE / 2 / EMAC_FIFO_ENTRY_SIZE); |
| out_be32(&p->tmr1, r); |
| out_be32(&p->trtr, EMAC_TRTR(EMAC_TX_FIFO_SIZE / 2)); |
| |
| /* PAUSE frame is sent when RX FIFO reaches its high-water mark, |
| there should be still enough space in FIFO to allow the our link |
| partner time to process this frame and also time to send PAUSE |
| frame itself. |
| |
| Here is the worst case scenario for the RX FIFO "headroom" |
| (from "The Switch Book") (100Mbps, without preamble, inter-frame gap): |
| |
| 1) One maximum-length frame on TX 1522 bytes |
| 2) One PAUSE frame time 64 bytes |
| 3) PAUSE frame decode time allowance 64 bytes |
| 4) One maximum-length frame on RX 1522 bytes |
| 5) Round-trip propagation delay of the link (100Mb) 15 bytes |
| ---------- |
| 3187 bytes |
| |
| I chose to set high-water mark to RX_FIFO_SIZE / 4 (1024 bytes) |
| low-water mark to RX_FIFO_SIZE / 8 (512 bytes) |
| */ |
| r = EMAC_RWMR(EMAC_RX_FIFO_SIZE(gige) / 8 / EMAC_FIFO_ENTRY_SIZE, |
| EMAC_RX_FIFO_SIZE(gige) / 4 / EMAC_FIFO_ENTRY_SIZE); |
| out_be32(&p->rwmr, r); |
| |
| /* Set PAUSE timer to the maximum */ |
| out_be32(&p->ptr, 0xffff); |
| |
| /* IRQ sources */ |
| out_be32(&p->iser, EMAC_ISR_TXPE | EMAC_ISR_RXPE | /* EMAC_ISR_TXUE | |
| EMAC_ISR_RXOE | */ EMAC_ISR_OVR | EMAC_ISR_BP | EMAC_ISR_SE | |
| EMAC_ISR_ALE | EMAC_ISR_BFCS | EMAC_ISR_PTLE | EMAC_ISR_ORE | |
| EMAC_ISR_IRE | EMAC_ISR_TE); |
| |
| /* We need to take GPCS PHY out of isolate mode after EMAC reset */ |
| if (emac_phy_gpcs(dev->phy.mode)) |
| mii_reset_phy(&dev->phy); |
| |
| return 0; |
| } |
| |
| /* BHs disabled */ |
| static void emac_reinitialize(struct ocp_enet_private *dev) |
| { |
| DBG("%d: reinitialize" NL, dev->def->index); |
| |
| if (!emac_configure(dev)) { |
| emac_tx_enable(dev); |
| emac_rx_enable(dev); |
| } |
| } |
| |
| /* BHs disabled */ |
| static void emac_full_tx_reset(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| struct ocp_func_emac_data *emacdata = dev->def->additions; |
| |
| DBG("%d: full_tx_reset" NL, dev->def->index); |
| |
| emac_tx_disable(dev); |
| mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); |
| emac_clean_tx_ring(dev); |
| dev->tx_cnt = dev->tx_slot = dev->ack_slot = 0; |
| |
| emac_configure(dev); |
| |
| mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); |
| emac_tx_enable(dev); |
| emac_rx_enable(dev); |
| |
| netif_wake_queue(ndev); |
| } |
| |
| static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 r; |
| int n; |
| |
| DBG2("%d: mdio_read(%02x,%02x)" NL, dev->def->index, id, reg); |
| |
| /* Enable proper MDIO port */ |
| zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); |
| |
| /* Wait for management interface to become idle */ |
| n = 10; |
| while (!emac_phy_done(in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) |
| goto to; |
| } |
| |
| /* Issue read command */ |
| out_be32(&p->stacr, |
| EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ | |
| (reg & EMAC_STACR_PRA_MASK) |
| | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
| | EMAC_STACR_START); |
| |
| /* Wait for read to complete */ |
| n = 100; |
| while (!emac_phy_done(r = in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) |
| goto to; |
| } |
| |
| if (unlikely(r & EMAC_STACR_PHYE)) { |
| DBG("%d: mdio_read(%02x, %02x) failed" NL, dev->def->index, |
| id, reg); |
| return -EREMOTEIO; |
| } |
| |
| r = ((r >> EMAC_STACR_PHYD_SHIFT) & EMAC_STACR_PHYD_MASK); |
| DBG2("%d: mdio_read -> %04x" NL, dev->def->index, r); |
| return r; |
| to: |
| DBG("%d: MII management interface timeout (read)" NL, dev->def->index); |
| return -ETIMEDOUT; |
| } |
| |
| static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg, |
| u16 val) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| int n; |
| |
| DBG2("%d: mdio_write(%02x,%02x,%04x)" NL, dev->def->index, id, reg, |
| val); |
| |
| /* Enable proper MDIO port */ |
| zmii_enable_mdio(dev->zmii_dev, dev->zmii_input); |
| |
| /* Wait for management interface to be idle */ |
| n = 10; |
| while (!emac_phy_done(in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) |
| goto to; |
| } |
| |
| /* Issue write command */ |
| out_be32(&p->stacr, |
| EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE | |
| (reg & EMAC_STACR_PRA_MASK) | |
| ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) | |
| (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START); |
| |
| /* Wait for write to complete */ |
| n = 100; |
| while (!emac_phy_done(in_be32(&p->stacr))) { |
| udelay(1); |
| if (!--n) |
| goto to; |
| } |
| return; |
| to: |
| DBG("%d: MII management interface timeout (write)" NL, dev->def->index); |
| } |
| |
| static int emac_mdio_read(struct net_device *ndev, int id, int reg) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| int res; |
| |
| local_bh_disable(); |
| res = __emac_mdio_read(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, |
| (u8) reg); |
| local_bh_enable(); |
| return res; |
| } |
| |
| static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| |
| local_bh_disable(); |
| __emac_mdio_write(dev->mdio_dev ? dev->mdio_dev : dev, (u8) id, |
| (u8) reg, (u16) val); |
| local_bh_enable(); |
| } |
| |
| /* BHs disabled */ |
| static void emac_set_multicast_list(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| struct emac_regs __iomem *p = dev->emacp; |
| u32 rmr = emac_iff2rmr(ndev); |
| |
| DBG("%d: multicast %08x" NL, dev->def->index, rmr); |
| BUG_ON(!netif_running(dev->ndev)); |
| |
| /* I decided to relax register access rules here to avoid |
| * full EMAC reset. |
| * |
| * There is a real problem with EMAC4 core if we use MWSW_001 bit |
| * in MR1 register and do a full EMAC reset. |
| * One TX BD status update is delayed and, after EMAC reset, it |
| * never happens, resulting in TX hung (it'll be recovered by TX |
| * timeout handler eventually, but this is just gross). |
| * So we either have to do full TX reset or try to cheat here :) |
| * |
| * The only required change is to RX mode register, so I *think* all |
| * we need is just to stop RX channel. This seems to work on all |
| * tested SoCs. --ebs |
| */ |
| emac_rx_disable(dev); |
| if (rmr & EMAC_RMR_MAE) |
| emac_hash_mc(dev); |
| out_be32(&p->rmr, rmr); |
| emac_rx_enable(dev); |
| } |
| |
| /* BHs disabled */ |
| static int emac_resize_rx_ring(struct ocp_enet_private *dev, int new_mtu) |
| { |
| struct ocp_func_emac_data *emacdata = dev->def->additions; |
| int rx_sync_size = emac_rx_sync_size(new_mtu); |
| int rx_skb_size = emac_rx_skb_size(new_mtu); |
| int i, ret = 0; |
| |
| emac_rx_disable(dev); |
| mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); |
| |
| if (dev->rx_sg_skb) { |
| ++dev->estats.rx_dropped_resize; |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } |
| |
| /* Make a first pass over RX ring and mark BDs ready, dropping |
| * non-processed packets on the way. We need this as a separate pass |
| * to simplify error recovery in the case of allocation failure later. |
| */ |
| for (i = 0; i < NUM_RX_BUFF; ++i) { |
| if (dev->rx_desc[i].ctrl & MAL_RX_CTRL_FIRST) |
| ++dev->estats.rx_dropped_resize; |
| |
| dev->rx_desc[i].data_len = 0; |
| dev->rx_desc[i].ctrl = MAL_RX_CTRL_EMPTY | |
| (i == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); |
| } |
| |
| /* Reallocate RX ring only if bigger skb buffers are required */ |
| if (rx_skb_size <= dev->rx_skb_size) |
| goto skip; |
| |
| /* Second pass, allocate new skbs */ |
| for (i = 0; i < NUM_RX_BUFF; ++i) { |
| struct sk_buff *skb = alloc_skb(rx_skb_size, GFP_ATOMIC); |
| if (!skb) { |
| ret = -ENOMEM; |
| goto oom; |
| } |
| |
| BUG_ON(!dev->rx_skb[i]); |
| dev_kfree_skb(dev->rx_skb[i]); |
| |
| skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); |
| dev->rx_desc[i].data_ptr = |
| dma_map_single(dev->ldev, skb->data - 2, rx_sync_size, |
| DMA_FROM_DEVICE) + 2; |
| dev->rx_skb[i] = skb; |
| } |
| skip: |
| /* Check if we need to change "Jumbo" bit in MR1 */ |
| if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) { |
| /* This is to prevent starting RX channel in emac_rx_enable() */ |
| dev->commac.rx_stopped = 1; |
| |
| dev->ndev->mtu = new_mtu; |
| emac_full_tx_reset(dev->ndev); |
| } |
| |
| mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(new_mtu)); |
| oom: |
| /* Restart RX */ |
| dev->commac.rx_stopped = dev->rx_slot = 0; |
| mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); |
| emac_rx_enable(dev); |
| |
| return ret; |
| } |
| |
| /* Process ctx, rtnl_lock semaphore */ |
| static int emac_change_mtu(struct net_device *ndev, int new_mtu) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| int ret = 0; |
| |
| if (new_mtu < EMAC_MIN_MTU || new_mtu > EMAC_MAX_MTU) |
| return -EINVAL; |
| |
| DBG("%d: change_mtu(%d)" NL, dev->def->index, new_mtu); |
| |
| local_bh_disable(); |
| if (netif_running(ndev)) { |
| /* Check if we really need to reinitalize RX ring */ |
| if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) |
| ret = emac_resize_rx_ring(dev, new_mtu); |
| } |
| |
| if (!ret) { |
| ndev->mtu = new_mtu; |
| dev->rx_skb_size = emac_rx_skb_size(new_mtu); |
| dev->rx_sync_size = emac_rx_sync_size(new_mtu); |
| } |
| local_bh_enable(); |
| |
| return ret; |
| } |
| |
| static void emac_clean_tx_ring(struct ocp_enet_private *dev) |
| { |
| int i; |
| for (i = 0; i < NUM_TX_BUFF; ++i) { |
| if (dev->tx_skb[i]) { |
| dev_kfree_skb(dev->tx_skb[i]); |
| dev->tx_skb[i] = NULL; |
| if (dev->tx_desc[i].ctrl & MAL_TX_CTRL_READY) |
| ++dev->estats.tx_dropped; |
| } |
| dev->tx_desc[i].ctrl = 0; |
| dev->tx_desc[i].data_ptr = 0; |
| } |
| } |
| |
| static void emac_clean_rx_ring(struct ocp_enet_private *dev) |
| { |
| int i; |
| for (i = 0; i < NUM_RX_BUFF; ++i) |
| if (dev->rx_skb[i]) { |
| dev->rx_desc[i].ctrl = 0; |
| dev_kfree_skb(dev->rx_skb[i]); |
| dev->rx_skb[i] = NULL; |
| dev->rx_desc[i].data_ptr = 0; |
| } |
| |
| if (dev->rx_sg_skb) { |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } |
| } |
| |
| static inline int emac_alloc_rx_skb(struct ocp_enet_private *dev, int slot, |
| gfp_t flags) |
| { |
| struct sk_buff *skb = alloc_skb(dev->rx_skb_size, flags); |
| if (unlikely(!skb)) |
| return -ENOMEM; |
| |
| dev->rx_skb[slot] = skb; |
| dev->rx_desc[slot].data_len = 0; |
| |
| skb_reserve(skb, EMAC_RX_SKB_HEADROOM + 2); |
| dev->rx_desc[slot].data_ptr = |
| dma_map_single(dev->ldev, skb->data - 2, dev->rx_sync_size, |
| DMA_FROM_DEVICE) + 2; |
| barrier(); |
| dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | |
| (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); |
| |
| return 0; |
| } |
| |
| static void emac_print_link_status(struct ocp_enet_private *dev) |
| { |
| if (netif_carrier_ok(dev->ndev)) |
| printk(KERN_INFO "%s: link is up, %d %s%s\n", |
| dev->ndev->name, dev->phy.speed, |
| dev->phy.duplex == DUPLEX_FULL ? "FDX" : "HDX", |
| dev->phy.pause ? ", pause enabled" : |
| dev->phy.asym_pause ? ", assymetric pause enabled" : ""); |
| else |
| printk(KERN_INFO "%s: link is down\n", dev->ndev->name); |
| } |
| |
| /* Process ctx, rtnl_lock semaphore */ |
| static int emac_open(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| struct ocp_func_emac_data *emacdata = dev->def->additions; |
| int err, i; |
| |
| DBG("%d: open" NL, dev->def->index); |
| |
| /* Setup error IRQ handler */ |
| err = request_irq(dev->def->irq, emac_irq, 0, "EMAC", dev); |
| if (err) { |
| printk(KERN_ERR "%s: failed to request IRQ %d\n", |
| ndev->name, dev->def->irq); |
| return err; |
| } |
| |
| /* Allocate RX ring */ |
| for (i = 0; i < NUM_RX_BUFF; ++i) |
| if (emac_alloc_rx_skb(dev, i, GFP_KERNEL)) { |
| printk(KERN_ERR "%s: failed to allocate RX ring\n", |
| ndev->name); |
| goto oom; |
| } |
| |
| local_bh_disable(); |
| dev->tx_cnt = dev->tx_slot = dev->ack_slot = dev->rx_slot = |
| dev->commac.rx_stopped = 0; |
| dev->rx_sg_skb = NULL; |
| |
| if (dev->phy.address >= 0) { |
| int link_poll_interval; |
| if (dev->phy.def->ops->poll_link(&dev->phy)) { |
| dev->phy.def->ops->read_link(&dev->phy); |
| EMAC_RX_CLK_DEFAULT(dev->def->index); |
| netif_carrier_on(dev->ndev); |
| link_poll_interval = PHY_POLL_LINK_ON; |
| } else { |
| EMAC_RX_CLK_TX(dev->def->index); |
| netif_carrier_off(dev->ndev); |
| link_poll_interval = PHY_POLL_LINK_OFF; |
| } |
| mod_timer(&dev->link_timer, jiffies + link_poll_interval); |
| emac_print_link_status(dev); |
| } else |
| netif_carrier_on(dev->ndev); |
| |
| emac_configure(dev); |
| mal_poll_add(dev->mal, &dev->commac); |
| mal_enable_tx_channel(dev->mal, emacdata->mal_tx_chan); |
| mal_set_rcbs(dev->mal, emacdata->mal_rx_chan, emac_rx_size(ndev->mtu)); |
| mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); |
| emac_tx_enable(dev); |
| emac_rx_enable(dev); |
| netif_start_queue(ndev); |
| local_bh_enable(); |
| |
| return 0; |
| oom: |
| emac_clean_rx_ring(dev); |
| free_irq(dev->def->irq, dev); |
| return -ENOMEM; |
| } |
| |
| /* BHs disabled */ |
| static int emac_link_differs(struct ocp_enet_private *dev) |
| { |
| u32 r = in_be32(&dev->emacp->mr1); |
| |
| int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; |
| int speed, pause, asym_pause; |
| |
| if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS)) |
| speed = SPEED_1000; |
| else if (r & EMAC_MR1_MF_100) |
| speed = SPEED_100; |
| else |
| speed = SPEED_10; |
| |
| switch (r & (EMAC_MR1_EIFC | EMAC_MR1_APP)) { |
| case (EMAC_MR1_EIFC | EMAC_MR1_APP): |
| pause = 1; |
| asym_pause = 0; |
| break; |
| case EMAC_MR1_APP: |
| pause = 0; |
| asym_pause = 1; |
| break; |
| default: |
| pause = asym_pause = 0; |
| } |
| return speed != dev->phy.speed || duplex != dev->phy.duplex || |
| pause != dev->phy.pause || asym_pause != dev->phy.asym_pause; |
| } |
| |
| /* BHs disabled */ |
| static void emac_link_timer(unsigned long data) |
| { |
| struct ocp_enet_private *dev = (struct ocp_enet_private *)data; |
| int link_poll_interval; |
| |
| DBG2("%d: link timer" NL, dev->def->index); |
| |
| if (dev->phy.def->ops->poll_link(&dev->phy)) { |
| if (!netif_carrier_ok(dev->ndev)) { |
| EMAC_RX_CLK_DEFAULT(dev->def->index); |
| |
| /* Get new link parameters */ |
| dev->phy.def->ops->read_link(&dev->phy); |
| |
| if (dev->tah_dev || emac_link_differs(dev)) |
| emac_full_tx_reset(dev->ndev); |
| |
| netif_carrier_on(dev->ndev); |
| emac_print_link_status(dev); |
| } |
| link_poll_interval = PHY_POLL_LINK_ON; |
| } else { |
| if (netif_carrier_ok(dev->ndev)) { |
| EMAC_RX_CLK_TX(dev->def->index); |
| #if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) |
| emac_reinitialize(dev); |
| #endif |
| netif_carrier_off(dev->ndev); |
| emac_print_link_status(dev); |
| } |
| |
| /* Retry reset if the previous attempt failed. |
| * This is needed mostly for CONFIG_IBM_EMAC_PHY_RX_CLK_FIX |
| * case, but I left it here because it shouldn't trigger for |
| * sane PHYs anyway. |
| */ |
| if (unlikely(dev->reset_failed)) |
| emac_reinitialize(dev); |
| |
| link_poll_interval = PHY_POLL_LINK_OFF; |
| } |
| mod_timer(&dev->link_timer, jiffies + link_poll_interval); |
| } |
| |
| /* BHs disabled */ |
| static void emac_force_link_update(struct ocp_enet_private *dev) |
| { |
| netif_carrier_off(dev->ndev); |
| if (timer_pending(&dev->link_timer)) |
| mod_timer(&dev->link_timer, jiffies + PHY_POLL_LINK_OFF); |
| } |
| |
| /* Process ctx, rtnl_lock semaphore */ |
| static int emac_close(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| struct ocp_func_emac_data *emacdata = dev->def->additions; |
| |
| DBG("%d: close" NL, dev->def->index); |
| |
| local_bh_disable(); |
| |
| if (dev->phy.address >= 0) |
| del_timer_sync(&dev->link_timer); |
| |
| netif_stop_queue(ndev); |
| emac_rx_disable(dev); |
| emac_tx_disable(dev); |
| mal_disable_rx_channel(dev->mal, emacdata->mal_rx_chan); |
| mal_disable_tx_channel(dev->mal, emacdata->mal_tx_chan); |
| mal_poll_del(dev->mal, &dev->commac); |
| local_bh_enable(); |
| |
| emac_clean_tx_ring(dev); |
| emac_clean_rx_ring(dev); |
| free_irq(dev->def->irq, dev); |
| |
| return 0; |
| } |
| |
| static inline u16 emac_tx_csum(struct ocp_enet_private *dev, |
| struct sk_buff *skb) |
| { |
| #if defined(CONFIG_IBM_EMAC_TAH) |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { |
| ++dev->stats.tx_packets_csum; |
| return EMAC_TX_CTRL_TAH_CSUM; |
| } |
| #endif |
| return 0; |
| } |
| |
| static inline int emac_xmit_finish(struct ocp_enet_private *dev, int len) |
| { |
| struct emac_regs __iomem *p = dev->emacp; |
| struct net_device *ndev = dev->ndev; |
| |
| /* Send the packet out */ |
| out_be32(&p->tmr0, EMAC_TMR0_XMIT); |
| |
| if (unlikely(++dev->tx_cnt == NUM_TX_BUFF)) { |
| netif_stop_queue(ndev); |
| DBG2("%d: stopped TX queue" NL, dev->def->index); |
| } |
| |
| ndev->trans_start = jiffies; |
| ++dev->stats.tx_packets; |
| dev->stats.tx_bytes += len; |
| |
| return 0; |
| } |
| |
| /* BHs disabled */ |
| static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| unsigned int len = skb->len; |
| int slot; |
| |
| u16 ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | |
| MAL_TX_CTRL_LAST | emac_tx_csum(dev, skb); |
| |
| slot = dev->tx_slot++; |
| if (dev->tx_slot == NUM_TX_BUFF) { |
| dev->tx_slot = 0; |
| ctrl |= MAL_TX_CTRL_WRAP; |
| } |
| |
| DBG2("%d: xmit(%u) %d" NL, dev->def->index, len, slot); |
| |
| dev->tx_skb[slot] = skb; |
| dev->tx_desc[slot].data_ptr = dma_map_single(dev->ldev, skb->data, len, |
| DMA_TO_DEVICE); |
| dev->tx_desc[slot].data_len = (u16) len; |
| barrier(); |
| dev->tx_desc[slot].ctrl = ctrl; |
| |
| return emac_xmit_finish(dev, len); |
| } |
| |
| #if defined(CONFIG_IBM_EMAC_TAH) |
| static inline int emac_xmit_split(struct ocp_enet_private *dev, int slot, |
| u32 pd, int len, int last, u16 base_ctrl) |
| { |
| while (1) { |
| u16 ctrl = base_ctrl; |
| int chunk = min(len, MAL_MAX_TX_SIZE); |
| len -= chunk; |
| |
| slot = (slot + 1) % NUM_TX_BUFF; |
| |
| if (last && !len) |
| ctrl |= MAL_TX_CTRL_LAST; |
| if (slot == NUM_TX_BUFF - 1) |
| ctrl |= MAL_TX_CTRL_WRAP; |
| |
| dev->tx_skb[slot] = NULL; |
| dev->tx_desc[slot].data_ptr = pd; |
| dev->tx_desc[slot].data_len = (u16) chunk; |
| dev->tx_desc[slot].ctrl = ctrl; |
| ++dev->tx_cnt; |
| |
| if (!len) |
| break; |
| |
| pd += chunk; |
| } |
| return slot; |
| } |
| |
| /* BHs disabled (SG version for TAH equipped EMACs) */ |
| static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| int nr_frags = skb_shinfo(skb)->nr_frags; |
| int len = skb->len, chunk; |
| int slot, i; |
| u16 ctrl; |
| u32 pd; |
| |
| /* This is common "fast" path */ |
| if (likely(!nr_frags && len <= MAL_MAX_TX_SIZE)) |
| return emac_start_xmit(skb, ndev); |
| |
| len -= skb->data_len; |
| |
| /* Note, this is only an *estimation*, we can still run out of empty |
| * slots because of the additional fragmentation into |
| * MAL_MAX_TX_SIZE-sized chunks |
| */ |
| if (unlikely(dev->tx_cnt + nr_frags + mal_tx_chunks(len) > NUM_TX_BUFF)) |
| goto stop_queue; |
| |
| ctrl = EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP | MAL_TX_CTRL_READY | |
| emac_tx_csum(dev, skb); |
| slot = dev->tx_slot; |
| |
| /* skb data */ |
| dev->tx_skb[slot] = NULL; |
| chunk = min(len, MAL_MAX_TX_SIZE); |
| dev->tx_desc[slot].data_ptr = pd = |
| dma_map_single(dev->ldev, skb->data, len, DMA_TO_DEVICE); |
| dev->tx_desc[slot].data_len = (u16) chunk; |
| len -= chunk; |
| if (unlikely(len)) |
| slot = emac_xmit_split(dev, slot, pd + chunk, len, !nr_frags, |
| ctrl); |
| /* skb fragments */ |
| for (i = 0; i < nr_frags; ++i) { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i]; |
| len = frag->size; |
| |
| if (unlikely(dev->tx_cnt + mal_tx_chunks(len) >= NUM_TX_BUFF)) |
| goto undo_frame; |
| |
| pd = dma_map_page(dev->ldev, frag->page, frag->page_offset, len, |
| DMA_TO_DEVICE); |
| |
| slot = emac_xmit_split(dev, slot, pd, len, i == nr_frags - 1, |
| ctrl); |
| } |
| |
| DBG2("%d: xmit_sg(%u) %d - %d" NL, dev->def->index, skb->len, |
| dev->tx_slot, slot); |
| |
| /* Attach skb to the last slot so we don't release it too early */ |
| dev->tx_skb[slot] = skb; |
| |
| /* Send the packet out */ |
| if (dev->tx_slot == NUM_TX_BUFF - 1) |
| ctrl |= MAL_TX_CTRL_WRAP; |
| barrier(); |
| dev->tx_desc[dev->tx_slot].ctrl = ctrl; |
| dev->tx_slot = (slot + 1) % NUM_TX_BUFF; |
| |
| return emac_xmit_finish(dev, skb->len); |
| |
| undo_frame: |
| /* Well, too bad. Our previous estimation was overly optimistic. |
| * Undo everything. |
| */ |
| while (slot != dev->tx_slot) { |
| dev->tx_desc[slot].ctrl = 0; |
| --dev->tx_cnt; |
| if (--slot < 0) |
| slot = NUM_TX_BUFF - 1; |
| } |
| ++dev->estats.tx_undo; |
| |
| stop_queue: |
| netif_stop_queue(ndev); |
| DBG2("%d: stopped TX queue" NL, dev->def->index); |
| return 1; |
| } |
| #else |
| # define emac_start_xmit_sg emac_start_xmit |
| #endif /* !defined(CONFIG_IBM_EMAC_TAH) */ |
| |
| /* BHs disabled */ |
| static void emac_parse_tx_error(struct ocp_enet_private *dev, u16 ctrl) |
| { |
| struct ibm_emac_error_stats *st = &dev->estats; |
| DBG("%d: BD TX error %04x" NL, dev->def->index, ctrl); |
| |
| ++st->tx_bd_errors; |
| if (ctrl & EMAC_TX_ST_BFCS) |
| ++st->tx_bd_bad_fcs; |
| if (ctrl & EMAC_TX_ST_LCS) |
| ++st->tx_bd_carrier_loss; |
| if (ctrl & EMAC_TX_ST_ED) |
| ++st->tx_bd_excessive_deferral; |
| if (ctrl & EMAC_TX_ST_EC) |
| ++st->tx_bd_excessive_collisions; |
| if (ctrl & EMAC_TX_ST_LC) |
| ++st->tx_bd_late_collision; |
| if (ctrl & EMAC_TX_ST_MC) |
| ++st->tx_bd_multple_collisions; |
| if (ctrl & EMAC_TX_ST_SC) |
| ++st->tx_bd_single_collision; |
| if (ctrl & EMAC_TX_ST_UR) |
| ++st->tx_bd_underrun; |
| if (ctrl & EMAC_TX_ST_SQE) |
| ++st->tx_bd_sqe; |
| } |
| |
| static void emac_poll_tx(void *param) |
| { |
| struct ocp_enet_private *dev = param; |
| DBG2("%d: poll_tx, %d %d" NL, dev->def->index, dev->tx_cnt, |
| dev->ack_slot); |
| |
| if (dev->tx_cnt) { |
| u16 ctrl; |
| int slot = dev->ack_slot, n = 0; |
| again: |
| ctrl = dev->tx_desc[slot].ctrl; |
| if (!(ctrl & MAL_TX_CTRL_READY)) { |
| struct sk_buff *skb = dev->tx_skb[slot]; |
| ++n; |
| |
| if (skb) { |
| dev_kfree_skb(skb); |
| dev->tx_skb[slot] = NULL; |
| } |
| slot = (slot + 1) % NUM_TX_BUFF; |
| |
| if (unlikely(EMAC_IS_BAD_TX(ctrl))) |
| emac_parse_tx_error(dev, ctrl); |
| |
| if (--dev->tx_cnt) |
| goto again; |
| } |
| if (n) { |
| dev->ack_slot = slot; |
| if (netif_queue_stopped(dev->ndev) && |
| dev->tx_cnt < EMAC_TX_WAKEUP_THRESH) |
| netif_wake_queue(dev->ndev); |
| |
| DBG2("%d: tx %d pkts" NL, dev->def->index, n); |
| } |
| } |
| } |
| |
| static inline void emac_recycle_rx_skb(struct ocp_enet_private *dev, int slot, |
| int len) |
| { |
| struct sk_buff *skb = dev->rx_skb[slot]; |
| DBG2("%d: recycle %d %d" NL, dev->def->index, slot, len); |
| |
| if (len) |
| dma_map_single(dev->ldev, skb->data - 2, |
| EMAC_DMA_ALIGN(len + 2), DMA_FROM_DEVICE); |
| |
| dev->rx_desc[slot].data_len = 0; |
| barrier(); |
| dev->rx_desc[slot].ctrl = MAL_RX_CTRL_EMPTY | |
| (slot == (NUM_RX_BUFF - 1) ? MAL_RX_CTRL_WRAP : 0); |
| } |
| |
| static void emac_parse_rx_error(struct ocp_enet_private *dev, u16 ctrl) |
| { |
| struct ibm_emac_error_stats *st = &dev->estats; |
| DBG("%d: BD RX error %04x" NL, dev->def->index, ctrl); |
| |
| ++st->rx_bd_errors; |
| if (ctrl & EMAC_RX_ST_OE) |
| ++st->rx_bd_overrun; |
| if (ctrl & EMAC_RX_ST_BP) |
| ++st->rx_bd_bad_packet; |
| if (ctrl & EMAC_RX_ST_RP) |
| ++st->rx_bd_runt_packet; |
| if (ctrl & EMAC_RX_ST_SE) |
| ++st->rx_bd_short_event; |
| if (ctrl & EMAC_RX_ST_AE) |
| ++st->rx_bd_alignment_error; |
| if (ctrl & EMAC_RX_ST_BFCS) |
| ++st->rx_bd_bad_fcs; |
| if (ctrl & EMAC_RX_ST_PTL) |
| ++st->rx_bd_packet_too_long; |
| if (ctrl & EMAC_RX_ST_ORE) |
| ++st->rx_bd_out_of_range; |
| if (ctrl & EMAC_RX_ST_IRE) |
| ++st->rx_bd_in_range; |
| } |
| |
| static inline void emac_rx_csum(struct ocp_enet_private *dev, |
| struct sk_buff *skb, u16 ctrl) |
| { |
| #if defined(CONFIG_IBM_EMAC_TAH) |
| if (!ctrl && dev->tah_dev) { |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| ++dev->stats.rx_packets_csum; |
| } |
| #endif |
| } |
| |
| static inline int emac_rx_sg_append(struct ocp_enet_private *dev, int slot) |
| { |
| if (likely(dev->rx_sg_skb != NULL)) { |
| int len = dev->rx_desc[slot].data_len; |
| int tot_len = dev->rx_sg_skb->len + len; |
| |
| if (unlikely(tot_len + 2 > dev->rx_skb_size)) { |
| ++dev->estats.rx_dropped_mtu; |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } else { |
| cacheable_memcpy(skb_tail_pointer(dev->rx_sg_skb), |
| dev->rx_skb[slot]->data, len); |
| skb_put(dev->rx_sg_skb, len); |
| emac_recycle_rx_skb(dev, slot, len); |
| return 0; |
| } |
| } |
| emac_recycle_rx_skb(dev, slot, 0); |
| return -1; |
| } |
| |
| /* BHs disabled */ |
| static int emac_poll_rx(void *param, int budget) |
| { |
| struct ocp_enet_private *dev = param; |
| int slot = dev->rx_slot, received = 0; |
| |
| DBG2("%d: poll_rx(%d)" NL, dev->def->index, budget); |
| |
| again: |
| while (budget > 0) { |
| int len; |
| struct sk_buff *skb; |
| u16 ctrl = dev->rx_desc[slot].ctrl; |
| |
| if (ctrl & MAL_RX_CTRL_EMPTY) |
| break; |
| |
| skb = dev->rx_skb[slot]; |
| barrier(); |
| len = dev->rx_desc[slot].data_len; |
| |
| if (unlikely(!MAL_IS_SINGLE_RX(ctrl))) |
| goto sg; |
| |
| ctrl &= EMAC_BAD_RX_MASK; |
| if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { |
| emac_parse_rx_error(dev, ctrl); |
| ++dev->estats.rx_dropped_error; |
| emac_recycle_rx_skb(dev, slot, 0); |
| len = 0; |
| goto next; |
| } |
| |
| if (len && len < EMAC_RX_COPY_THRESH) { |
| struct sk_buff *copy_skb = |
| alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); |
| if (unlikely(!copy_skb)) |
| goto oom; |
| |
| skb_reserve(copy_skb, EMAC_RX_SKB_HEADROOM + 2); |
| cacheable_memcpy(copy_skb->data - 2, skb->data - 2, |
| len + 2); |
| emac_recycle_rx_skb(dev, slot, len); |
| skb = copy_skb; |
| } else if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) |
| goto oom; |
| |
| skb_put(skb, len); |
| push_packet: |
| skb->protocol = eth_type_trans(skb, dev->ndev); |
| emac_rx_csum(dev, skb, ctrl); |
| |
| if (unlikely(netif_receive_skb(skb) == NET_RX_DROP)) |
| ++dev->estats.rx_dropped_stack; |
| next: |
| ++dev->stats.rx_packets; |
| skip: |
| dev->stats.rx_bytes += len; |
| slot = (slot + 1) % NUM_RX_BUFF; |
| --budget; |
| ++received; |
| continue; |
| sg: |
| if (ctrl & MAL_RX_CTRL_FIRST) { |
| BUG_ON(dev->rx_sg_skb); |
| if (unlikely(emac_alloc_rx_skb(dev, slot, GFP_ATOMIC))) { |
| DBG("%d: rx OOM %d" NL, dev->def->index, slot); |
| ++dev->estats.rx_dropped_oom; |
| emac_recycle_rx_skb(dev, slot, 0); |
| } else { |
| dev->rx_sg_skb = skb; |
| skb_put(skb, len); |
| } |
| } else if (!emac_rx_sg_append(dev, slot) && |
| (ctrl & MAL_RX_CTRL_LAST)) { |
| |
| skb = dev->rx_sg_skb; |
| dev->rx_sg_skb = NULL; |
| |
| ctrl &= EMAC_BAD_RX_MASK; |
| if (unlikely(ctrl && ctrl != EMAC_RX_TAH_BAD_CSUM)) { |
| emac_parse_rx_error(dev, ctrl); |
| ++dev->estats.rx_dropped_error; |
| dev_kfree_skb(skb); |
| len = 0; |
| } else |
| goto push_packet; |
| } |
| goto skip; |
| oom: |
| DBG("%d: rx OOM %d" NL, dev->def->index, slot); |
| /* Drop the packet and recycle skb */ |
| ++dev->estats.rx_dropped_oom; |
| emac_recycle_rx_skb(dev, slot, 0); |
| goto next; |
| } |
| |
| if (received) { |
| DBG2("%d: rx %d BDs" NL, dev->def->index, received); |
| dev->rx_slot = slot; |
| } |
| |
| if (unlikely(budget && dev->commac.rx_stopped)) { |
| struct ocp_func_emac_data *emacdata = dev->def->additions; |
| |
| barrier(); |
| if (!(dev->rx_desc[slot].ctrl & MAL_RX_CTRL_EMPTY)) { |
| DBG2("%d: rx restart" NL, dev->def->index); |
| received = 0; |
| goto again; |
| } |
| |
| if (dev->rx_sg_skb) { |
| DBG2("%d: dropping partial rx packet" NL, |
| dev->def->index); |
| ++dev->estats.rx_dropped_error; |
| dev_kfree_skb(dev->rx_sg_skb); |
| dev->rx_sg_skb = NULL; |
| } |
| |
| dev->commac.rx_stopped = 0; |
| mal_enable_rx_channel(dev->mal, emacdata->mal_rx_chan); |
| emac_rx_enable(dev); |
| dev->rx_slot = 0; |
| } |
| return received; |
| } |
| |
| /* BHs disabled */ |
| static int emac_peek_rx(void *param) |
| { |
| struct ocp_enet_private *dev = param; |
| return !(dev->rx_desc[dev->rx_slot].ctrl & MAL_RX_CTRL_EMPTY); |
| } |
| |
| /* BHs disabled */ |
| static int emac_peek_rx_sg(void *param) |
| { |
| struct ocp_enet_private *dev = param; |
| int slot = dev->rx_slot; |
| while (1) { |
| u16 ctrl = dev->rx_desc[slot].ctrl; |
| if (ctrl & MAL_RX_CTRL_EMPTY) |
| return 0; |
| else if (ctrl & MAL_RX_CTRL_LAST) |
| return 1; |
| |
| slot = (slot + 1) % NUM_RX_BUFF; |
| |
| /* I'm just being paranoid here :) */ |
| if (unlikely(slot == dev->rx_slot)) |
| return 0; |
| } |
| } |
| |
| /* Hard IRQ */ |
| static void emac_rxde(void *param) |
| { |
| struct ocp_enet_private *dev = param; |
| ++dev->estats.rx_stopped; |
| emac_rx_disable_async(dev); |
| } |
| |
| /* Hard IRQ */ |
| static irqreturn_t emac_irq(int irq, void *dev_instance) |
| { |
| struct ocp_enet_private *dev = dev_instance; |
| struct emac_regs __iomem *p = dev->emacp; |
| struct ibm_emac_error_stats *st = &dev->estats; |
| |
| u32 isr = in_be32(&p->isr); |
| out_be32(&p->isr, isr); |
| |
| DBG("%d: isr = %08x" NL, dev->def->index, isr); |
| |
| if (isr & EMAC_ISR_TXPE) |
| ++st->tx_parity; |
| if (isr & EMAC_ISR_RXPE) |
| ++st->rx_parity; |
| if (isr & EMAC_ISR_TXUE) |
| ++st->tx_underrun; |
| if (isr & EMAC_ISR_RXOE) |
| ++st->rx_fifo_overrun; |
| if (isr & EMAC_ISR_OVR) |
| ++st->rx_overrun; |
| if (isr & EMAC_ISR_BP) |
| ++st->rx_bad_packet; |
| if (isr & EMAC_ISR_RP) |
| ++st->rx_runt_packet; |
| if (isr & EMAC_ISR_SE) |
| ++st->rx_short_event; |
| if (isr & EMAC_ISR_ALE) |
| ++st->rx_alignment_error; |
| if (isr & EMAC_ISR_BFCS) |
| ++st->rx_bad_fcs; |
| if (isr & EMAC_ISR_PTLE) |
| ++st->rx_packet_too_long; |
| if (isr & EMAC_ISR_ORE) |
| ++st->rx_out_of_range; |
| if (isr & EMAC_ISR_IRE) |
| ++st->rx_in_range; |
| if (isr & EMAC_ISR_SQE) |
| ++st->tx_sqe; |
| if (isr & EMAC_ISR_TE) |
| ++st->tx_errors; |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct net_device_stats *emac_stats(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| struct ibm_emac_stats *st = &dev->stats; |
| struct ibm_emac_error_stats *est = &dev->estats; |
| struct net_device_stats *nst = &dev->nstats; |
| |
| DBG2("%d: stats" NL, dev->def->index); |
| |
| /* Compute "legacy" statistics */ |
| local_irq_disable(); |
| nst->rx_packets = (unsigned long)st->rx_packets; |
| nst->rx_bytes = (unsigned long)st->rx_bytes; |
| nst->tx_packets = (unsigned long)st->tx_packets; |
| nst->tx_bytes = (unsigned long)st->tx_bytes; |
| nst->rx_dropped = (unsigned long)(est->rx_dropped_oom + |
| est->rx_dropped_error + |
| est->rx_dropped_resize + |
| est->rx_dropped_mtu); |
| nst->tx_dropped = (unsigned long)est->tx_dropped; |
| |
| nst->rx_errors = (unsigned long)est->rx_bd_errors; |
| nst->rx_fifo_errors = (unsigned long)(est->rx_bd_overrun + |
| est->rx_fifo_overrun + |
| est->rx_overrun); |
| nst->rx_frame_errors = (unsigned long)(est->rx_bd_alignment_error + |
| est->rx_alignment_error); |
| nst->rx_crc_errors = (unsigned long)(est->rx_bd_bad_fcs + |
| est->rx_bad_fcs); |
| nst->rx_length_errors = (unsigned long)(est->rx_bd_runt_packet + |
| est->rx_bd_short_event + |
| est->rx_bd_packet_too_long + |
| est->rx_bd_out_of_range + |
| est->rx_bd_in_range + |
| est->rx_runt_packet + |
| est->rx_short_event + |
| est->rx_packet_too_long + |
| est->rx_out_of_range + |
| est->rx_in_range); |
| |
| nst->tx_errors = (unsigned long)(est->tx_bd_errors + est->tx_errors); |
| nst->tx_fifo_errors = (unsigned long)(est->tx_bd_underrun + |
| est->tx_underrun); |
| nst->tx_carrier_errors = (unsigned long)est->tx_bd_carrier_loss; |
| nst->collisions = (unsigned long)(est->tx_bd_excessive_deferral + |
| est->tx_bd_excessive_collisions + |
| est->tx_bd_late_collision + |
| est->tx_bd_multple_collisions); |
| local_irq_enable(); |
| return nst; |
| } |
| |
| static void emac_remove(struct ocp_device *ocpdev) |
| { |
| struct ocp_enet_private *dev = ocp_get_drvdata(ocpdev); |
| |
| DBG("%d: remove" NL, dev->def->index); |
| |
| ocp_set_drvdata(ocpdev, NULL); |
| unregister_netdev(dev->ndev); |
| |
| tah_fini(dev->tah_dev); |
| rgmii_fini(dev->rgmii_dev, dev->rgmii_input); |
| zmii_fini(dev->zmii_dev, dev->zmii_input); |
| |
| emac_dbg_register(dev->def->index, NULL); |
| |
| mal_unregister_commac(dev->mal, &dev->commac); |
| iounmap(dev->emacp); |
| kfree(dev->ndev); |
| } |
| |
| static struct mal_commac_ops emac_commac_ops = { |
| .poll_tx = &emac_poll_tx, |
| .poll_rx = &emac_poll_rx, |
| .peek_rx = &emac_peek_rx, |
| .rxde = &emac_rxde, |
| }; |
| |
| static struct mal_commac_ops emac_commac_sg_ops = { |
| .poll_tx = &emac_poll_tx, |
| .poll_rx = &emac_poll_rx, |
| .peek_rx = &emac_peek_rx_sg, |
| .rxde = &emac_rxde, |
| }; |
| |
| /* Ethtool support */ |
| static int emac_ethtool_get_settings(struct net_device *ndev, |
| struct ethtool_cmd *cmd) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| |
| cmd->supported = dev->phy.features; |
| cmd->port = PORT_MII; |
| cmd->phy_address = dev->phy.address; |
| cmd->transceiver = |
| dev->phy.address >= 0 ? XCVR_EXTERNAL : XCVR_INTERNAL; |
| |
| local_bh_disable(); |
| cmd->advertising = dev->phy.advertising; |
| cmd->autoneg = dev->phy.autoneg; |
| cmd->speed = dev->phy.speed; |
| cmd->duplex = dev->phy.duplex; |
| local_bh_enable(); |
| |
| return 0; |
| } |
| |
| static int emac_ethtool_set_settings(struct net_device *ndev, |
| struct ethtool_cmd *cmd) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| u32 f = dev->phy.features; |
| |
| DBG("%d: set_settings(%d, %d, %d, 0x%08x)" NL, dev->def->index, |
| cmd->autoneg, cmd->speed, cmd->duplex, cmd->advertising); |
| |
| /* Basic sanity checks */ |
| if (dev->phy.address < 0) |
| return -EOPNOTSUPP; |
| if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE) |
| return -EINVAL; |
| if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0) |
| return -EINVAL; |
| if (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) |
| return -EINVAL; |
| |
| if (cmd->autoneg == AUTONEG_DISABLE) { |
| switch (cmd->speed) { |
| case SPEED_10: |
| if (cmd->duplex == DUPLEX_HALF |
| && !(f & SUPPORTED_10baseT_Half)) |
| return -EINVAL; |
| if (cmd->duplex == DUPLEX_FULL |
| && !(f & SUPPORTED_10baseT_Full)) |
| return -EINVAL; |
| break; |
| case SPEED_100: |
| if (cmd->duplex == DUPLEX_HALF |
| && !(f & SUPPORTED_100baseT_Half)) |
| return -EINVAL; |
| if (cmd->duplex == DUPLEX_FULL |
| && !(f & SUPPORTED_100baseT_Full)) |
| return -EINVAL; |
| break; |
| case SPEED_1000: |
| if (cmd->duplex == DUPLEX_HALF |
| && !(f & SUPPORTED_1000baseT_Half)) |
| return -EINVAL; |
| if (cmd->duplex == DUPLEX_FULL |
| && !(f & SUPPORTED_1000baseT_Full)) |
| return -EINVAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| local_bh_disable(); |
| dev->phy.def->ops->setup_forced(&dev->phy, cmd->speed, |
| cmd->duplex); |
| |
| } else { |
| if (!(f & SUPPORTED_Autoneg)) |
| return -EINVAL; |
| |
| local_bh_disable(); |
| dev->phy.def->ops->setup_aneg(&dev->phy, |
| (cmd->advertising & f) | |
| (dev->phy.advertising & |
| (ADVERTISED_Pause | |
| ADVERTISED_Asym_Pause))); |
| } |
| emac_force_link_update(dev); |
| local_bh_enable(); |
| |
| return 0; |
| } |
| |
| static void emac_ethtool_get_ringparam(struct net_device *ndev, |
| struct ethtool_ringparam *rp) |
| { |
| rp->rx_max_pending = rp->rx_pending = NUM_RX_BUFF; |
| rp->tx_max_pending = rp->tx_pending = NUM_TX_BUFF; |
| } |
| |
| static void emac_ethtool_get_pauseparam(struct net_device *ndev, |
| struct ethtool_pauseparam *pp) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| |
| local_bh_disable(); |
| if ((dev->phy.features & SUPPORTED_Autoneg) && |
| (dev->phy.advertising & (ADVERTISED_Pause | ADVERTISED_Asym_Pause))) |
| pp->autoneg = 1; |
| |
| if (dev->phy.duplex == DUPLEX_FULL) { |
| if (dev->phy.pause) |
| pp->rx_pause = pp->tx_pause = 1; |
| else if (dev->phy.asym_pause) |
| pp->tx_pause = 1; |
| } |
| local_bh_enable(); |
| } |
| |
| static u32 emac_ethtool_get_rx_csum(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| return dev->tah_dev != 0; |
| } |
| |
| static int emac_get_regs_len(struct ocp_enet_private *dev) |
| { |
| return sizeof(struct emac_ethtool_regs_subhdr) + EMAC_ETHTOOL_REGS_SIZE; |
| } |
| |
| static int emac_ethtool_get_regs_len(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| return sizeof(struct emac_ethtool_regs_hdr) + |
| emac_get_regs_len(dev) + mal_get_regs_len(dev->mal) + |
| zmii_get_regs_len(dev->zmii_dev) + |
| rgmii_get_regs_len(dev->rgmii_dev) + |
| tah_get_regs_len(dev->tah_dev); |
| } |
| |
| static void *emac_dump_regs(struct ocp_enet_private *dev, void *buf) |
| { |
| struct emac_ethtool_regs_subhdr *hdr = buf; |
| |
| hdr->version = EMAC_ETHTOOL_REGS_VER; |
| hdr->index = dev->def->index; |
| memcpy_fromio(hdr + 1, dev->emacp, EMAC_ETHTOOL_REGS_SIZE); |
| return ((void *)(hdr + 1) + EMAC_ETHTOOL_REGS_SIZE); |
| } |
| |
| static void emac_ethtool_get_regs(struct net_device *ndev, |
| struct ethtool_regs *regs, void *buf) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| struct emac_ethtool_regs_hdr *hdr = buf; |
| |
| hdr->components = 0; |
| buf = hdr + 1; |
| |
| local_irq_disable(); |
| buf = mal_dump_regs(dev->mal, buf); |
| buf = emac_dump_regs(dev, buf); |
| if (dev->zmii_dev) { |
| hdr->components |= EMAC_ETHTOOL_REGS_ZMII; |
| buf = zmii_dump_regs(dev->zmii_dev, buf); |
| } |
| if (dev->rgmii_dev) { |
| hdr->components |= EMAC_ETHTOOL_REGS_RGMII; |
| buf = rgmii_dump_regs(dev->rgmii_dev, buf); |
| } |
| if (dev->tah_dev) { |
| hdr->components |= EMAC_ETHTOOL_REGS_TAH; |
| buf = tah_dump_regs(dev->tah_dev, buf); |
| } |
| local_irq_enable(); |
| } |
| |
| static int emac_ethtool_nway_reset(struct net_device *ndev) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| int res = 0; |
| |
| DBG("%d: nway_reset" NL, dev->def->index); |
| |
| if (dev->phy.address < 0) |
| return -EOPNOTSUPP; |
| |
| local_bh_disable(); |
| if (!dev->phy.autoneg) { |
| res = -EINVAL; |
| goto out; |
| } |
| |
| dev->phy.def->ops->setup_aneg(&dev->phy, dev->phy.advertising); |
| emac_force_link_update(dev); |
| |
| out: |
| local_bh_enable(); |
| return res; |
| } |
| |
| static int emac_ethtool_get_stats_count(struct net_device *ndev) |
| { |
| return EMAC_ETHTOOL_STATS_COUNT; |
| } |
| |
| static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset, |
| u8 * buf) |
| { |
| if (stringset == ETH_SS_STATS) |
| memcpy(buf, &emac_stats_keys, sizeof(emac_stats_keys)); |
| } |
| |
| static void emac_ethtool_get_ethtool_stats(struct net_device *ndev, |
| struct ethtool_stats *estats, |
| u64 * tmp_stats) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| local_irq_disable(); |
| memcpy(tmp_stats, &dev->stats, sizeof(dev->stats)); |
| tmp_stats += sizeof(dev->stats) / sizeof(u64); |
| memcpy(tmp_stats, &dev->estats, sizeof(dev->estats)); |
| local_irq_enable(); |
| } |
| |
| static void emac_ethtool_get_drvinfo(struct net_device *ndev, |
| struct ethtool_drvinfo *info) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| |
| strcpy(info->driver, "ibm_emac"); |
| strcpy(info->version, DRV_VERSION); |
| info->fw_version[0] = '\0'; |
| sprintf(info->bus_info, "PPC 4xx EMAC %d", dev->def->index); |
| info->n_stats = emac_ethtool_get_stats_count(ndev); |
| info->regdump_len = emac_ethtool_get_regs_len(ndev); |
| } |
| |
| static const struct ethtool_ops emac_ethtool_ops = { |
| .get_settings = emac_ethtool_get_settings, |
| .set_settings = emac_ethtool_set_settings, |
| .get_drvinfo = emac_ethtool_get_drvinfo, |
| |
| .get_regs_len = emac_ethtool_get_regs_len, |
| .get_regs = emac_ethtool_get_regs, |
| |
| .nway_reset = emac_ethtool_nway_reset, |
| |
| .get_ringparam = emac_ethtool_get_ringparam, |
| .get_pauseparam = emac_ethtool_get_pauseparam, |
| |
| .get_rx_csum = emac_ethtool_get_rx_csum, |
| |
| .get_strings = emac_ethtool_get_strings, |
| .get_stats_count = emac_ethtool_get_stats_count, |
| .get_ethtool_stats = emac_ethtool_get_ethtool_stats, |
| |
| .get_link = ethtool_op_get_link, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .get_sg = ethtool_op_get_sg, |
| }; |
| |
| static int emac_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) |
| { |
| struct ocp_enet_private *dev = ndev->priv; |
| uint16_t *data = (uint16_t *) & rq->ifr_ifru; |
| |
| DBG("%d: ioctl %08x" NL, dev->def->index, cmd); |
| |
| if (dev->phy.address < 0) |
| return -EOPNOTSUPP; |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| case SIOCDEVPRIVATE: |
| data[0] = dev->phy.address; |
| /* Fall through */ |
| case SIOCGMIIREG: |
| case SIOCDEVPRIVATE + 1: |
| data[3] = emac_mdio_read(ndev, dev->phy.address, data[1]); |
| return 0; |
| |
| case SIOCSMIIREG: |
| case SIOCDEVPRIVATE + 2: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| emac_mdio_write(ndev, dev->phy.address, data[1], data[2]); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int __init emac_probe(struct ocp_device *ocpdev) |
| { |
| struct ocp_func_emac_data *emacdata = ocpdev->def->additions; |
| struct net_device *ndev; |
| struct ocp_device *maldev; |
| struct ocp_enet_private *dev; |
| int err, i; |
| |
| DBG("%d: probe" NL, ocpdev->def->index); |
| |
| if (!emacdata) { |
| printk(KERN_ERR "emac%d: Missing additional data!\n", |
| ocpdev->def->index); |
| return -ENODEV; |
| } |
| |
| /* Allocate our net_device structure */ |
| ndev = alloc_etherdev(sizeof(struct ocp_enet_private)); |
| if (!ndev) { |
| printk(KERN_ERR "emac%d: could not allocate ethernet device!\n", |
| ocpdev->def->index); |
| return -ENOMEM; |
| } |
| dev = ndev->priv; |
| dev->ndev = ndev; |
| dev->ldev = &ocpdev->dev; |
| dev->def = ocpdev->def; |
| SET_MODULE_OWNER(ndev); |
| |
| /* Find MAL device we are connected to */ |
| maldev = |
| ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_MAL, emacdata->mal_idx); |
| if (!maldev) { |
| printk(KERN_ERR "emac%d: unknown mal%d device!\n", |
| dev->def->index, emacdata->mal_idx); |
| err = -ENODEV; |
| goto out; |
| } |
| dev->mal = ocp_get_drvdata(maldev); |
| if (!dev->mal) { |
| printk(KERN_ERR "emac%d: mal%d hasn't been initialized yet!\n", |
| dev->def->index, emacdata->mal_idx); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| /* Register with MAL */ |
| dev->commac.ops = &emac_commac_ops; |
| dev->commac.dev = dev; |
| dev->commac.tx_chan_mask = MAL_CHAN_MASK(emacdata->mal_tx_chan); |
| dev->commac.rx_chan_mask = MAL_CHAN_MASK(emacdata->mal_rx_chan); |
| err = mal_register_commac(dev->mal, &dev->commac); |
| if (err) { |
| printk(KERN_ERR "emac%d: failed to register with mal%d!\n", |
| dev->def->index, emacdata->mal_idx); |
| goto out; |
| } |
| dev->rx_skb_size = emac_rx_skb_size(ndev->mtu); |
| dev->rx_sync_size = emac_rx_sync_size(ndev->mtu); |
| |
| /* Get pointers to BD rings */ |
| dev->tx_desc = |
| dev->mal->bd_virt + mal_tx_bd_offset(dev->mal, |
| emacdata->mal_tx_chan); |
| dev->rx_desc = |
| dev->mal->bd_virt + mal_rx_bd_offset(dev->mal, |
| emacdata->mal_rx_chan); |
| |
| DBG("%d: tx_desc %p" NL, ocpdev->def->index, dev->tx_desc); |
| DBG("%d: rx_desc %p" NL, ocpdev->def->index, dev->rx_desc); |
| |
| /* Clean rings */ |
| memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); |
| memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); |
| |
| /* If we depend on another EMAC for MDIO, check whether it was probed already */ |
| if (emacdata->mdio_idx >= 0 && emacdata->mdio_idx != ocpdev->def->index) { |
| struct ocp_device *mdiodev = |
| ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, |
| emacdata->mdio_idx); |
| if (!mdiodev) { |
| printk(KERN_ERR "emac%d: unknown emac%d device!\n", |
| dev->def->index, emacdata->mdio_idx); |
| err = -ENODEV; |
| goto out2; |
| } |
| dev->mdio_dev = ocp_get_drvdata(mdiodev); |
| if (!dev->mdio_dev) { |
| printk(KERN_ERR |
| "emac%d: emac%d hasn't been initialized yet!\n", |
| dev->def->index, emacdata->mdio_idx); |
| err = -ENODEV; |
| goto out2; |
| } |
| } |
| |
| /* Attach to ZMII, if needed */ |
| if ((err = zmii_attach(dev)) != 0) |
| goto out2; |
| |
| /* Attach to RGMII, if needed */ |
| if ((err = rgmii_attach(dev)) != 0) |
| goto out3; |
| |
| /* Attach to TAH, if needed */ |
| if ((err = tah_attach(dev)) != 0) |
| goto out4; |
| |
| /* Map EMAC regs */ |
| dev->emacp = ioremap(dev->def->paddr, sizeof(struct emac_regs)); |
| if (!dev->emacp) { |
| printk(KERN_ERR "emac%d: could not ioremap device registers!\n", |
| dev->def->index); |
| err = -ENOMEM; |
| goto out5; |
| } |
| |
| /* Fill in MAC address */ |
| for (i = 0; i < 6; ++i) |
| ndev->dev_addr[i] = emacdata->mac_addr[i]; |
| |
| /* Set some link defaults before we can find out real parameters */ |
| dev->phy.speed = SPEED_100; |
| dev->phy.duplex = DUPLEX_FULL; |
| dev->phy.autoneg = AUTONEG_DISABLE; |
| dev->phy.pause = dev->phy.asym_pause = 0; |
| dev->stop_timeout = STOP_TIMEOUT_100; |
| init_timer(&dev->link_timer); |
| dev->link_timer.function = emac_link_timer; |
| dev->link_timer.data = (unsigned long)dev; |
| |
| /* Find PHY if any */ |
| dev->phy.dev = ndev; |
| dev->phy.mode = emacdata->phy_mode; |
| if (emacdata->phy_map != 0xffffffff) { |
| u32 phy_map = emacdata->phy_map | busy_phy_map; |
| u32 adv; |
| |
| DBG("%d: PHY maps %08x %08x" NL, dev->def->index, |
| emacdata->phy_map, busy_phy_map); |
| |
| EMAC_RX_CLK_TX(dev->def->index); |
| |
| dev->phy.mdio_read = emac_mdio_read; |
| dev->phy.mdio_write = emac_mdio_write; |
| |
| /* Configure EMAC with defaults so we can at least use MDIO |
| * This is needed mostly for 440GX |
| */ |
| if (emac_phy_gpcs(dev->phy.mode)) { |
| /* XXX |
| * Make GPCS PHY address equal to EMAC index. |
| * We probably should take into account busy_phy_map |
| * and/or phy_map here. |
| */ |
| dev->phy.address = dev->def->index; |
| } |
| |
| emac_configure(dev); |
| |
| for (i = 0; i < 0x20; phy_map >>= 1, ++i) |
| if (!(phy_map & 1)) { |
| int r; |
| busy_phy_map |= 1 << i; |
| |
| /* Quick check if there is a PHY at the address */ |
| r = emac_mdio_read(dev->ndev, i, MII_BMCR); |
| if (r == 0xffff || r < 0) |
| continue; |
| if (!mii_phy_probe(&dev->phy, i)) |
| break; |
| } |
| if (i == 0x20) { |
| printk(KERN_WARNING "emac%d: can't find PHY!\n", |
| dev->def->index); |
| goto out6; |
| } |
| |
| /* Init PHY */ |
| if (dev->phy.def->ops->init) |
| dev->phy.def->ops->init(&dev->phy); |
| |
| /* Disable any PHY features not supported by the platform */ |
| dev->phy.def->features &= ~emacdata->phy_feat_exc; |
| |
| /* Setup initial link parameters */ |
| if (dev->phy.features & SUPPORTED_Autoneg) { |
| adv = dev->phy.features; |
| #if !defined(CONFIG_40x) |
| adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; |
| #endif |
| /* Restart autonegotiation */ |
| dev->phy.def->ops->setup_aneg(&dev->phy, adv); |
| } else { |
| u32 f = dev->phy.def->features; |
| int speed = SPEED_10, fd = DUPLEX_HALF; |
| |
| /* Select highest supported speed/duplex */ |
| if (f & SUPPORTED_1000baseT_Full) { |
| speed = SPEED_1000; |
| fd = DUPLEX_FULL; |
| } else if (f & SUPPORTED_1000baseT_Half) |
| speed = SPEED_1000; |
| else if (f & SUPPORTED_100baseT_Full) { |
| speed = SPEED_100; |
| fd = DUPLEX_FULL; |
| } else if (f & SUPPORTED_100baseT_Half) |
| speed = SPEED_100; |
| else if (f & SUPPORTED_10baseT_Full) |
| fd = DUPLEX_FULL; |
| |
| /* Force link parameters */ |
| dev->phy.def->ops->setup_forced(&dev->phy, speed, fd); |
| } |
| } else { |
| emac_reset(dev); |
| |
| /* PHY-less configuration. |
| * XXX I probably should move these settings to emacdata |
| */ |
| dev->phy.address = -1; |
| dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; |
| dev->phy.pause = 1; |
| } |
| |
| /* Fill in the driver function table */ |
| ndev->open = &emac_open; |
| if (dev->tah_dev) { |
| ndev->hard_start_xmit = &emac_start_xmit_sg; |
| ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; |
| } else |
| ndev->hard_start_xmit = &emac_start_xmit; |
| ndev->tx_timeout = &emac_full_tx_reset; |
| ndev->watchdog_timeo = 5 * HZ; |
| ndev->stop = &emac_close; |
| ndev->get_stats = &emac_stats; |
| ndev->set_multicast_list = &emac_set_multicast_list; |
| ndev->do_ioctl = &emac_ioctl; |
| if (emac_phy_supports_gige(emacdata->phy_mode)) { |
| ndev->change_mtu = &emac_change_mtu; |
| dev->commac.ops = &emac_commac_sg_ops; |
| } |
| SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops); |
| |
| netif_carrier_off(ndev); |
| netif_stop_queue(ndev); |
| |
| err = register_netdev(ndev); |
| if (err) { |
| printk(KERN_ERR "emac%d: failed to register net device (%d)!\n", |
| dev->def->index, err); |
| goto out6; |
| } |
| |
| ocp_set_drvdata(ocpdev, dev); |
| |
| printk("%s: emac%d, MAC %02x:%02x:%02x:%02x:%02x:%02x\n", |
| ndev->name, dev->def->index, |
| ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], |
| ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); |
| |
| if (dev->phy.address >= 0) |
| printk("%s: found %s PHY (0x%02x)\n", ndev->name, |
| dev->phy.def->name, dev->phy.address); |
| |
| emac_dbg_register(dev->def->index, dev); |
| |
| return 0; |
| out6: |
| iounmap(dev->emacp); |
| out5: |
| tah_fini(dev->tah_dev); |
| out4: |
| rgmii_fini(dev->rgmii_dev, dev->rgmii_input); |
| out3: |
| zmii_fini(dev->zmii_dev, dev->zmii_input); |
| out2: |
| mal_unregister_commac(dev->mal, &dev->commac); |
| out: |
| kfree(ndev); |
| return err; |
| } |
| |
| static struct ocp_device_id emac_ids[] = { |
| { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_EMAC }, |
| { .vendor = OCP_VENDOR_INVALID} |
| }; |
| |
| static struct ocp_driver emac_driver = { |
| .name = "emac", |
| .id_table = emac_ids, |
| .probe = emac_probe, |
| .remove = emac_remove, |
| }; |
| |
| static int __init emac_init(void) |
| { |
| printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n"); |
| |
| DBG(": init" NL); |
| |
| if (mal_init()) |
| return -ENODEV; |
| |
| EMAC_CLK_INTERNAL; |
| if (ocp_register_driver(&emac_driver)) { |
| EMAC_CLK_EXTERNAL; |
| ocp_unregister_driver(&emac_driver); |
| mal_exit(); |
| return -ENODEV; |
| } |
| EMAC_CLK_EXTERNAL; |
| |
| emac_init_debug(); |
| return 0; |
| } |
| |
| static void __exit emac_exit(void) |
| { |
| DBG(": exit" NL); |
| ocp_unregister_driver(&emac_driver); |
| mal_exit(); |
| emac_fini_debug(); |
| } |
| |
| module_init(emac_init); |
| module_exit(emac_exit); |