| /** | |
| * core.c - DesignWare USB3 DRD Controller Core file | |
| * | |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com | |
| * | |
| * Authors: Felipe Balbi <balbi@ti.com>, | |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions, and the following disclaimer, | |
| * without modification. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. The names of the above-listed copyright holders may not be used | |
| * to endorse or promote products derived from this software without | |
| * specific prior written permission. | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") version 2, as published by the Free | |
| * Software Foundation. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS | |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioport.h> | |
| #include <linux/io.h> | |
| #include <linux/list.h> | |
| #include <linux/delay.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/usb/ch9.h> | |
| #include <linux/usb/gadget.h> | |
| #include <linux/module.h> | |
| #include "core.h" | |
| #include "gadget.h" | |
| #include "io.h" | |
| #include "debug.h" | |
| static char *maximum_speed = "super"; | |
| module_param(maximum_speed, charp, 0); | |
| MODULE_PARM_DESC(maximum_speed, "Maximum supported speed."); | |
| /* -------------------------------------------------------------------------- */ | |
| #define DWC3_DEVS_POSSIBLE 32 | |
| static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE); | |
| int dwc3_get_device_id(void) | |
| { | |
| int id; | |
| again: | |
| id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE); | |
| if (id < DWC3_DEVS_POSSIBLE) { | |
| int old; | |
| old = test_and_set_bit(id, dwc3_devs); | |
| if (old) | |
| goto again; | |
| } else { | |
| pr_err("dwc3: no space for new device\n"); | |
| id = -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dwc3_get_device_id); | |
| void dwc3_put_device_id(int id) | |
| { | |
| int ret; | |
| if (id < 0) | |
| return; | |
| ret = test_bit(id, dwc3_devs); | |
| WARN(!ret, "dwc3: ID %d not in use\n", id); | |
| clear_bit(id, dwc3_devs); | |
| } | |
| EXPORT_SYMBOL_GPL(dwc3_put_device_id); | |
| void dwc3_set_mode(struct dwc3 *dwc, u32 mode) | |
| { | |
| u32 reg; | |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); | |
| reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); | |
| reg |= DWC3_GCTL_PRTCAPDIR(mode); | |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); | |
| } | |
| /** | |
| * dwc3_core_soft_reset - Issues core soft reset and PHY reset | |
| * @dwc: pointer to our context structure | |
| */ | |
| static void dwc3_core_soft_reset(struct dwc3 *dwc) | |
| { | |
| u32 reg; | |
| /* Before Resetting PHY, put Core in Reset */ | |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); | |
| reg |= DWC3_GCTL_CORESOFTRESET; | |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); | |
| /* Assert USB3 PHY reset */ | |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); | |
| reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; | |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); | |
| /* Assert USB2 PHY reset */ | |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); | |
| reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; | |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); | |
| mdelay(100); | |
| /* Clear USB3 PHY reset */ | |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); | |
| reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; | |
| dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); | |
| /* Clear USB2 PHY reset */ | |
| reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); | |
| reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; | |
| dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); | |
| /* After PHYs are stable we can take Core out of reset state */ | |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); | |
| reg &= ~DWC3_GCTL_CORESOFTRESET; | |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); | |
| } | |
| /** | |
| * dwc3_free_one_event_buffer - Frees one event buffer | |
| * @dwc: Pointer to our controller context structure | |
| * @evt: Pointer to event buffer to be freed | |
| */ | |
| static void dwc3_free_one_event_buffer(struct dwc3 *dwc, | |
| struct dwc3_event_buffer *evt) | |
| { | |
| dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma); | |
| kfree(evt); | |
| } | |
| /** | |
| * dwc3_alloc_one_event_buffer - Allocated one event buffer structure | |
| * @dwc: Pointer to our controller context structure | |
| * @length: size of the event buffer | |
| * | |
| * Returns a pointer to the allocated event buffer structure on succes | |
| * otherwise ERR_PTR(errno). | |
| */ | |
| static struct dwc3_event_buffer *__devinit | |
| dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) | |
| { | |
| struct dwc3_event_buffer *evt; | |
| evt = kzalloc(sizeof(*evt), GFP_KERNEL); | |
| if (!evt) | |
| return ERR_PTR(-ENOMEM); | |
| evt->dwc = dwc; | |
| evt->length = length; | |
| evt->buf = dma_alloc_coherent(dwc->dev, length, | |
| &evt->dma, GFP_KERNEL); | |
| if (!evt->buf) { | |
| kfree(evt); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| return evt; | |
| } | |
| /** | |
| * dwc3_free_event_buffers - frees all allocated event buffers | |
| * @dwc: Pointer to our controller context structure | |
| */ | |
| static void dwc3_free_event_buffers(struct dwc3 *dwc) | |
| { | |
| struct dwc3_event_buffer *evt; | |
| int i; | |
| for (i = 0; i < dwc->num_event_buffers; i++) { | |
| evt = dwc->ev_buffs[i]; | |
| if (evt) { | |
| dwc3_free_one_event_buffer(dwc, evt); | |
| dwc->ev_buffs[i] = NULL; | |
| } | |
| } | |
| } | |
| /** | |
| * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length | |
| * @dwc: Pointer to out controller context structure | |
| * @length: size of event buffer | |
| * | |
| * Returns 0 on success otherwise negative errno. In error the case, dwc | |
| * may contain some buffers allocated but not all which were requested. | |
| */ | |
| static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) | |
| { | |
| int num; | |
| int i; | |
| num = DWC3_NUM_INT(dwc->hwparams.hwparams1); | |
| dwc->num_event_buffers = num; | |
| dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL); | |
| if (!dwc->ev_buffs) { | |
| dev_err(dwc->dev, "can't allocate event buffers array\n"); | |
| return -ENOMEM; | |
| } | |
| for (i = 0; i < num; i++) { | |
| struct dwc3_event_buffer *evt; | |
| evt = dwc3_alloc_one_event_buffer(dwc, length); | |
| if (IS_ERR(evt)) { | |
| dev_err(dwc->dev, "can't allocate event buffer\n"); | |
| return PTR_ERR(evt); | |
| } | |
| dwc->ev_buffs[i] = evt; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * dwc3_event_buffers_setup - setup our allocated event buffers | |
| * @dwc: Pointer to out controller context structure | |
| * | |
| * Returns 0 on success otherwise negative errno. | |
| */ | |
| static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc) | |
| { | |
| struct dwc3_event_buffer *evt; | |
| int n; | |
| for (n = 0; n < dwc->num_event_buffers; n++) { | |
| evt = dwc->ev_buffs[n]; | |
| dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", | |
| evt->buf, (unsigned long long) evt->dma, | |
| evt->length); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), | |
| lower_32_bits(evt->dma)); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), | |
| upper_32_bits(evt->dma)); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), | |
| evt->length & 0xffff); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); | |
| } | |
| return 0; | |
| } | |
| static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) | |
| { | |
| struct dwc3_event_buffer *evt; | |
| int n; | |
| for (n = 0; n < dwc->num_event_buffers; n++) { | |
| evt = dwc->ev_buffs[n]; | |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0); | |
| dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); | |
| } | |
| } | |
| static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc) | |
| { | |
| struct dwc3_hwparams *parms = &dwc->hwparams; | |
| parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); | |
| parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); | |
| parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); | |
| parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); | |
| parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); | |
| parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); | |
| parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); | |
| parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); | |
| parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); | |
| } | |
| /** | |
| * dwc3_core_init - Low-level initialization of DWC3 Core | |
| * @dwc: Pointer to our controller context structure | |
| * | |
| * Returns 0 on success otherwise negative errno. | |
| */ | |
| static int __devinit dwc3_core_init(struct dwc3 *dwc) | |
| { | |
| unsigned long timeout; | |
| u32 reg; | |
| int ret; | |
| reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); | |
| /* This should read as U3 followed by revision number */ | |
| if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { | |
| dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); | |
| ret = -ENODEV; | |
| goto err0; | |
| } | |
| dwc->revision = reg; | |
| dwc3_core_soft_reset(dwc); | |
| /* issue device SoftReset too */ | |
| timeout = jiffies + msecs_to_jiffies(500); | |
| dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); | |
| do { | |
| reg = dwc3_readl(dwc->regs, DWC3_DCTL); | |
| if (!(reg & DWC3_DCTL_CSFTRST)) | |
| break; | |
| if (time_after(jiffies, timeout)) { | |
| dev_err(dwc->dev, "Reset Timed Out\n"); | |
| ret = -ETIMEDOUT; | |
| goto err0; | |
| } | |
| cpu_relax(); | |
| } while (true); | |
| dwc3_cache_hwparams(dwc); | |
| reg = dwc3_readl(dwc->regs, DWC3_GCTL); | |
| reg &= ~DWC3_GCTL_SCALEDOWN(3); | |
| reg &= ~DWC3_GCTL_DISSCRAMBLE; | |
| switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { | |
| case DWC3_GHWPARAMS1_EN_PWROPT_CLK: | |
| reg &= ~DWC3_GCTL_DSBLCLKGTNG; | |
| break; | |
| default: | |
| dev_dbg(dwc->dev, "No power optimization available\n"); | |
| } | |
| /* | |
| * WORKAROUND: DWC3 revisions <1.90a have a bug | |
| * when The device fails to connect at SuperSpeed | |
| * and falls back to high-speed mode which causes | |
| * the device to enter in a Connect/Disconnect loop | |
| */ | |
| if (dwc->revision < DWC3_REVISION_190A) | |
| reg |= DWC3_GCTL_U2RSTECN; | |
| dwc3_writel(dwc->regs, DWC3_GCTL, reg); | |
| ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); | |
| if (ret) { | |
| dev_err(dwc->dev, "failed to allocate event buffers\n"); | |
| ret = -ENOMEM; | |
| goto err1; | |
| } | |
| ret = dwc3_event_buffers_setup(dwc); | |
| if (ret) { | |
| dev_err(dwc->dev, "failed to setup event buffers\n"); | |
| goto err1; | |
| } | |
| return 0; | |
| err1: | |
| dwc3_free_event_buffers(dwc); | |
| err0: | |
| return ret; | |
| } | |
| static void dwc3_core_exit(struct dwc3 *dwc) | |
| { | |
| dwc3_event_buffers_cleanup(dwc); | |
| dwc3_free_event_buffers(dwc); | |
| } | |
| #define DWC3_ALIGN_MASK (16 - 1) | |
| static int __devinit dwc3_probe(struct platform_device *pdev) | |
| { | |
| struct resource *res; | |
| struct dwc3 *dwc; | |
| int ret = -ENOMEM; | |
| int irq; | |
| void __iomem *regs; | |
| void *mem; | |
| u8 mode; | |
| mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); | |
| if (!mem) { | |
| dev_err(&pdev->dev, "not enough memory\n"); | |
| goto err0; | |
| } | |
| dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); | |
| dwc->mem = mem; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&pdev->dev, "missing resource\n"); | |
| goto err1; | |
| } | |
| dwc->res = res; | |
| res = request_mem_region(res->start, resource_size(res), | |
| dev_name(&pdev->dev)); | |
| if (!res) { | |
| dev_err(&pdev->dev, "can't request mem region\n"); | |
| goto err1; | |
| } | |
| regs = ioremap(res->start, resource_size(res)); | |
| if (!regs) { | |
| dev_err(&pdev->dev, "ioremap failed\n"); | |
| goto err2; | |
| } | |
| irq = platform_get_irq(pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&pdev->dev, "missing IRQ\n"); | |
| goto err3; | |
| } | |
| spin_lock_init(&dwc->lock); | |
| platform_set_drvdata(pdev, dwc); | |
| dwc->regs = regs; | |
| dwc->regs_size = resource_size(res); | |
| dwc->dev = &pdev->dev; | |
| dwc->irq = irq; | |
| if (!strncmp("super", maximum_speed, 5)) | |
| dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; | |
| else if (!strncmp("high", maximum_speed, 4)) | |
| dwc->maximum_speed = DWC3_DCFG_HIGHSPEED; | |
| else if (!strncmp("full", maximum_speed, 4)) | |
| dwc->maximum_speed = DWC3_DCFG_FULLSPEED1; | |
| else if (!strncmp("low", maximum_speed, 3)) | |
| dwc->maximum_speed = DWC3_DCFG_LOWSPEED; | |
| else | |
| dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; | |
| pm_runtime_enable(&pdev->dev); | |
| pm_runtime_get_sync(&pdev->dev); | |
| pm_runtime_forbid(&pdev->dev); | |
| ret = dwc3_core_init(dwc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize core\n"); | |
| goto err3; | |
| } | |
| mode = DWC3_MODE(dwc->hwparams.hwparams0); | |
| switch (mode) { | |
| case DWC3_MODE_DEVICE: | |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); | |
| ret = dwc3_gadget_init(dwc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize gadget\n"); | |
| goto err4; | |
| } | |
| break; | |
| case DWC3_MODE_HOST: | |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); | |
| ret = dwc3_host_init(dwc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize host\n"); | |
| goto err4; | |
| } | |
| break; | |
| case DWC3_MODE_DRD: | |
| dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); | |
| ret = dwc3_host_init(dwc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize host\n"); | |
| goto err4; | |
| } | |
| ret = dwc3_gadget_init(dwc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize gadget\n"); | |
| goto err4; | |
| } | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "Unsupported mode of operation %d\n", mode); | |
| goto err4; | |
| } | |
| dwc->mode = mode; | |
| ret = dwc3_debugfs_init(dwc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to initialize debugfs\n"); | |
| goto err5; | |
| } | |
| pm_runtime_allow(&pdev->dev); | |
| return 0; | |
| err5: | |
| switch (mode) { | |
| case DWC3_MODE_DEVICE: | |
| dwc3_gadget_exit(dwc); | |
| break; | |
| case DWC3_MODE_HOST: | |
| dwc3_host_exit(dwc); | |
| break; | |
| case DWC3_MODE_DRD: | |
| dwc3_host_exit(dwc); | |
| dwc3_gadget_exit(dwc); | |
| break; | |
| default: | |
| /* do nothing */ | |
| break; | |
| } | |
| err4: | |
| dwc3_core_exit(dwc); | |
| err3: | |
| iounmap(regs); | |
| err2: | |
| release_mem_region(res->start, resource_size(res)); | |
| err1: | |
| kfree(dwc->mem); | |
| err0: | |
| return ret; | |
| } | |
| static int __devexit dwc3_remove(struct platform_device *pdev) | |
| { | |
| struct dwc3 *dwc = platform_get_drvdata(pdev); | |
| struct resource *res; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| pm_runtime_put(&pdev->dev); | |
| pm_runtime_disable(&pdev->dev); | |
| dwc3_debugfs_exit(dwc); | |
| switch (dwc->mode) { | |
| case DWC3_MODE_DEVICE: | |
| dwc3_gadget_exit(dwc); | |
| break; | |
| case DWC3_MODE_HOST: | |
| dwc3_host_exit(dwc); | |
| break; | |
| case DWC3_MODE_DRD: | |
| dwc3_host_exit(dwc); | |
| dwc3_gadget_exit(dwc); | |
| break; | |
| default: | |
| /* do nothing */ | |
| break; | |
| } | |
| dwc3_core_exit(dwc); | |
| release_mem_region(res->start, resource_size(res)); | |
| iounmap(dwc->regs); | |
| kfree(dwc->mem); | |
| return 0; | |
| } | |
| static struct platform_driver dwc3_driver = { | |
| .probe = dwc3_probe, | |
| .remove = __devexit_p(dwc3_remove), | |
| .driver = { | |
| .name = "dwc3", | |
| }, | |
| }; | |
| MODULE_ALIAS("platform:dwc3"); | |
| MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); | |
| static int __devinit dwc3_init(void) | |
| { | |
| return platform_driver_register(&dwc3_driver); | |
| } | |
| module_init(dwc3_init); | |
| static void __exit dwc3_exit(void) | |
| { | |
| platform_driver_unregister(&dwc3_driver); | |
| } | |
| module_exit(dwc3_exit); |