drivers/staging/rtl8192su/Makefile

NIC_SELECT = RTL8192SU

EXTRA_CFLAGS += -std=gnu89
EXTRA_CFLAGS += -O2
EXTRA_CFLAGS += -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y

EXTRA_CFLAGS += -DJACKSON_NEW_RX
EXTRA_CFLAGS += -DTHOMAS_BEACON -DTHOMAS_TURBO
#EXTRA_CFLAGS += -DUSE_ONE_PIPE
EXTRA_CFLAGS += -DENABLE_DOT11D

EXTRA_CFLAGS += -DRTL8192SU
EXTRA_CFLAGS += -DRTL8190_Download_Firmware_From_Header=1
EXTRA_CFLAGS += -DRTL8192S_PREPARE_FOR_NORMAL_RELEASE
EXTRA_CFLAGS += -DRTL8192SU_DISABLE_IQK=1

#EXTRA_CFLAGS += -DEEPROM_OLD_FORMAT_SUPPORT

#EXTRA_CFLAGS += -DUSB_RX_AGGREGATION_SUPPORT=0
#EXTRA_CFLAGS += -DUSB_TX_DRIVER_AGGREGATION_ENABLE=0
#EXTRA_CFLAGS += -DRTL8192SU_DISABLE_CCK_RATE=0
EXTRA_CFLAGS += -DRTL8192S_DISABLE_FW_DM=0
EXTRA_CFLAGS += -DDISABLE_BB_RF=0
EXTRA_CFLAGS += -DRTL8192SU_USE_PARAM_TXPWR=0
EXTRA_CFLAGS += -DRTL8192SU_FPGA_UNSPECIFIED_NETWORK=0
#EXTRA_CFLAGS += -DRTL8192SU_FPGA_2MAC_VERIFICATION #=0
EXTRA_CFLAGS += -DRTL8192SU_ASIC_VERIFICATION
EXTRA_CFLAGS += -DRTL8192SU_USB_PHY_TEST=0

#EXTRA_CFLAGS += -DMUTIPLE_BULK_OUT
EXTRA_CFLAGS += -DCONFIG_RTL8192_PM

r8192s_usb-objs :=		\
	r8180_93cx6.o		\
	r8192U_wx.o		\
	r8192S_phy.o		\
	r8192S_rtl6052.o	\
	r8192S_rtl8225.o	\
	r819xU_cmdpkt.o		\
	r8192U_dm.o		\
	r8192SU_HWImg.o		\
	r8192S_firmware.o	\
	r8192S_Efuse.o		\
	r8192U_core.o		\
	r8192U_pm.o

ieee80211-rsl-objs :=			\
	ieee80211/ieee80211_rx.o	\
	ieee80211/ieee80211_softmac.o	\
	ieee80211/ieee80211_tx.o	\
	ieee80211/ieee80211_wx.o	\
	ieee80211/ieee80211_module.o	\
	ieee80211/ieee80211_softmac_wx.o\
	ieee80211/rtl819x_HTProc.o	\
	ieee80211/rtl819x_TSProc.o	\
	ieee80211/rtl819x_BAProc.o	\
	ieee80211/dot11d.o

obj-$(CONFIG_RTL8192SU) += r8192s_usb.o
obj-$(CONFIG_RTL8192SU) += ieee80211-rsl.o
obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt.o
obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt_tkip.o
obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt_ccmp.o
obj-$(CONFIG_RTL8192SU) += ieee80211/ieee80211_crypt_wep.o