| # | |
| # MMC/SD host controller drivers | |
| # | |
| comment "MMC/SD/SDIO Host Controller Drivers" | |
| config MMC_ARMMMCI | |
| tristate "ARM AMBA Multimedia Card Interface support" | |
| depends on ARM_AMBA | |
| help | |
| This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card | |
| Interface (PL180 and PL181) support. If you have an ARM(R) | |
| platform with a Multimedia Card slot, say Y or M here. | |
| If unsure, say N. | |
| config MMC_PXA | |
| tristate "Intel PXA25x/26x/27x Multimedia Card Interface support" | |
| depends on ARCH_PXA | |
| help | |
| This selects the Intel(R) PXA(R) Multimedia card Interface. | |
| If you have a PXA(R) platform with a Multimedia Card slot, | |
| say Y or M here. | |
| If unsure, say N. | |
| config MMC_SDHCI | |
| tristate "Secure Digital Host Controller Interface support" | |
| depends on HAS_DMA | |
| help | |
| This selects the generic Secure Digital Host Controller Interface. | |
| It is used by manufacturers such as Texas Instruments(R), Ricoh(R) | |
| and Toshiba(R). Most controllers found in laptops are of this type. | |
| If you have a controller with this interface, say Y or M here. You | |
| also need to enable an appropriate bus interface. | |
| If unsure, say N. | |
| config MMC_SDHCI_IO_ACCESSORS | |
| bool | |
| depends on MMC_SDHCI | |
| help | |
| This is silent Kconfig symbol that is selected by the drivers that | |
| need to overwrite SDHCI IO memory accessors. | |
| config MMC_SDHCI_PCI | |
| tristate "SDHCI support on PCI bus" | |
| depends on MMC_SDHCI && PCI | |
| help | |
| This selects the PCI Secure Digital Host Controller Interface. | |
| Most controllers found today are PCI devices. | |
| If you have a controller with this interface, say Y or M here. | |
| If unsure, say N. | |
| config MMC_RICOH_MMC | |
| tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)" | |
| depends on MMC_SDHCI_PCI | |
| help | |
| This selects the disabler for the Ricoh MMC Controller. This | |
| proprietary controller is unnecessary because the SDHCI driver | |
| supports MMC cards on the SD controller, but if it is not | |
| disabled, it will steal the MMC cards away - rendering them | |
| useless. It is safe to select this driver even if you don't | |
| have a Ricoh based card reader. | |
| To compile this driver as a module, choose M here: | |
| the module will be called ricoh_mmc. | |
| If unsure, say Y. | |
| config MMC_SDHCI_OF | |
| tristate "SDHCI support on OpenFirmware platforms" | |
| depends on MMC_SDHCI && PPC_OF | |
| select MMC_SDHCI_IO_ACCESSORS | |
| help | |
| This selects the OF support for Secure Digital Host Controller | |
| Interfaces. So far, only the Freescale eSDHC controller is known | |
| to exist on OF platforms. | |
| If unsure, say N. | |
| config MMC_SDHCI_PLTFM | |
| tristate "SDHCI support on the platform specific bus" | |
| depends on MMC_SDHCI | |
| help | |
| This selects the platform specific bus support for Secure Digital Host | |
| Controller Interface. | |
| If you have a controller with this interface, say Y or M here. | |
| If unsure, say N. | |
| config MMC_SDHCI_S3C | |
| tristate "SDHCI support on Samsung S3C SoC" | |
| depends on MMC_SDHCI && (PLAT_S3C24XX || PLAT_S3C64XX) | |
| help | |
| This selects the Secure Digital Host Controller Interface (SDHCI) | |
| often referrered to as the HSMMC block in some of the Samsung S3C | |
| range of SoC. | |
| Note, due to the problems with DMA, the DMA support is only | |
| available with CONFIG_EXPERIMENTAL is selected. | |
| If you have a controller with this interface, say Y or M here. | |
| If unsure, say N. | |
| config MMC_SDHCI_S3C_DMA | |
| bool "DMA support on S3C SDHCI" | |
| depends on MMC_SDHCI_S3C && EXPERIMENTAL | |
| help | |
| Enable DMA support on the Samsung S3C SDHCI glue. The DMA | |
| has proved to be problematic if the controller encounters | |
| certain errors, and thus should be treated with care. | |
| YMMV. | |
| config MMC_OMAP | |
| tristate "TI OMAP Multimedia Card Interface support" | |
| depends on ARCH_OMAP | |
| select TPS65010 if MACH_OMAP_H2 | |
| help | |
| This selects the TI OMAP Multimedia card Interface. | |
| If you have an OMAP board with a Multimedia Card slot, | |
| say Y or M here. | |
| If unsure, say N. | |
| config MMC_OMAP_HS | |
| tristate "TI OMAP High Speed Multimedia Card Interface support" | |
| depends on ARCH_OMAP2430 || ARCH_OMAP3 | |
| help | |
| This selects the TI OMAP High Speed Multimedia card Interface. | |
| If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot, | |
| say Y or M here. | |
| If unsure, say N. | |
| config MMC_WBSD | |
| tristate "Winbond W83L51xD SD/MMC Card Interface support" | |
| depends on ISA_DMA_API | |
| help | |
| This selects the Winbond(R) W83L51xD Secure digital and | |
| Multimedia card Interface. | |
| If you have a machine with a integrated W83L518D or W83L519D | |
| SD/MMC card reader, say Y or M here. | |
| If unsure, say N. | |
| config MMC_AU1X | |
| tristate "Alchemy AU1XX0 MMC Card Interface support" | |
| depends on SOC_AU1200 | |
| help | |
| This selects the AMD Alchemy(R) Multimedia card interface. | |
| If you have a Alchemy platform with a MMC slot, say Y or M here. | |
| If unsure, say N. | |
| config MMC_AT91 | |
| tristate "AT91 SD/MMC Card Interface support" | |
| depends on ARCH_AT91 | |
| help | |
| This selects the AT91 MCI controller. | |
| If unsure, say N. | |
| config MMC_ATMELMCI | |
| tristate "Atmel Multimedia Card Interface support" | |
| depends on AVR32 | |
| help | |
| This selects the Atmel Multimedia Card Interface driver. If | |
| you have an AT32 (AVR32) platform with a Multimedia Card | |
| slot, say Y or M here. | |
| If unsure, say N. | |
| config MMC_ATMELMCI_DMA | |
| bool "Atmel MCI DMA support (EXPERIMENTAL)" | |
| depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL | |
| help | |
| Say Y here to have the Atmel MCI driver use a DMA engine to | |
| do data transfers and thus increase the throughput and | |
| reduce the CPU utilization. Note that this is highly | |
| experimental and may cause the driver to lock up. | |
| If unsure, say N. | |
| config MMC_IMX | |
| tristate "Motorola i.MX Multimedia Card Interface support" | |
| depends on ARCH_MX1 | |
| help | |
| This selects the Motorola i.MX Multimedia card Interface. | |
| If you have a i.MX platform with a Multimedia Card slot, | |
| say Y or M here. | |
| If unsure, say N. | |
| config MMC_MXC | |
| tristate "Freescale i.MX2/3 Multimedia Card Interface support" | |
| depends on ARCH_MXC | |
| help | |
| This selects the Freescale i.MX2/3 Multimedia card Interface. | |
| If you have a i.MX platform with a Multimedia Card slot, | |
| say Y or M here. | |
| If unsure, say N. | |
| config MMC_TIFM_SD | |
| tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL && PCI | |
| select TIFM_CORE | |
| help | |
| Say Y here if you want to be able to access MMC/SD cards with | |
| the Texas Instruments(R) Flash Media card reader, found in many | |
| laptops. | |
| This option 'selects' (turns on, enables) 'TIFM_CORE', but you | |
| probably also need appropriate card reader host adapter, such as | |
| 'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support | |
| (TIFM_7XX1)'. | |
| To compile this driver as a module, choose M here: the | |
| module will be called tifm_sd. | |
| config MMC_MVSDIO | |
| tristate "Marvell MMC/SD/SDIO host driver" | |
| depends on PLAT_ORION | |
| ---help--- | |
| This selects the Marvell SDIO host driver. | |
| SDIO may currently be found on the Kirkwood 88F6281 and 88F6192 | |
| SoC controllers. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mvsdio. | |
| config MMC_SPI | |
| tristate "MMC/SD/SDIO over SPI" | |
| depends on SPI_MASTER && !HIGHMEM && HAS_DMA | |
| select CRC7 | |
| select CRC_ITU_T | |
| help | |
| Some systems access MMC/SD/SDIO cards using a SPI controller | |
| instead of using a "native" MMC/SD/SDIO controller. This has a | |
| disadvantage of being relatively high overhead, but a compensating | |
| advantage of working on many systems without dedicated MMC/SD/SDIO | |
| controllers. | |
| If unsure, or if your system has no SPI master driver, say N. | |
| config MMC_S3C | |
| tristate "Samsung S3C SD/MMC Card Interface support" | |
| depends on ARCH_S3C2410 | |
| help | |
| This selects a driver for the MCI interface found in | |
| Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. | |
| If you have a board based on one of those and a MMC/SD | |
| slot, say Y or M here. | |
| If unsure, say N. | |
| config MMC_SDRICOH_CS | |
| tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" | |
| depends on EXPERIMENTAL && PCI && PCMCIA | |
| help | |
| Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA | |
| card whenever you insert a MMC or SD card into the card slot. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sdricoh_cs. | |
| config MMC_TMIO | |
| tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" | |
| depends on MFD_TMIO || MFD_ASIC3 | |
| help | |
| This provides support for the SD/MMC cell found in TC6393XB, | |
| T7L66XB and also HTC ASIC3 | |
| config MMC_CB710 | |
| tristate "ENE CB710 MMC/SD Interface support" | |
| depends on PCI | |
| select CB710_CORE | |
| help | |
| This option enables support for MMC/SD part of ENE CB710/720 Flash | |
| memory card reader found in some laptops (ie. some versions of | |
| HP Compaq nx9500). | |
| This driver can also be built as a module. If so, the module | |
| will be called cb710-mmc. | |
| config MMC_VIA_SDMMC | |
| tristate "VIA SD/MMC Card Reader Driver" | |
| depends on PCI | |
| help | |
| This selects the VIA SD/MMC Card Reader driver, say Y or M here. | |
| VIA provides one multi-functional card reader which integrated into | |
| some motherboards manufactured by VIA. This card reader supports | |
| SD/MMC/SDHC. | |
| If you have a controller with this interface, say Y or M here. | |
| If unsure, say N. |