| # | |
| # Multifunction miscellaneous devices | |
| # | |
| menu "Multifunction device drivers" | |
| depends on HAS_IOMEM | |
| config MFD_CORE | |
| tristate | |
| default n | |
| config MFD_SM501 | |
| tristate "Support for Silicon Motion SM501" | |
| ---help--- | |
| This is the core driver for the Silicon Motion SM501 multimedia | |
| companion chip. This device is a multifunction device which may | |
| provide numerous interfaces including USB host controller, USB gadget, | |
| asynchronous serial ports, audio functions, and a dual display video | |
| interface. The device may be connected by PCI or local bus with | |
| varying functions enabled. | |
| config MFD_SM501_GPIO | |
| bool "Export GPIO via GPIO layer" | |
| depends on MFD_SM501 && GPIOLIB | |
| ---help--- | |
| This option uses the gpio library layer to export the 64 GPIO | |
| lines on the SM501. The platform data is used to supply the | |
| base number for the first GPIO line to register. | |
| config MFD_ASIC3 | |
| bool "Support for Compaq ASIC3" | |
| depends on GENERIC_HARDIRQS && GPIOLIB && ARM | |
| select MFD_CORE | |
| ---help--- | |
| This driver supports the ASIC3 multifunction chip found on many | |
| PDAs (mainly iPAQ and HTC based ones) | |
| config MFD_DM355EVM_MSP | |
| bool "DaVinci DM355 EVM microcontroller" | |
| depends on I2C && MACH_DAVINCI_DM355_EVM | |
| help | |
| This driver supports the MSP430 microcontroller used on these | |
| boards. MSP430 firmware manages resets and power sequencing, | |
| inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
| config HTC_EGPIO | |
| bool "HTC EGPIO support" | |
| depends on GENERIC_HARDIRQS && GPIOLIB && ARM | |
| help | |
| This driver supports the CPLD egpio chip present on | |
| several HTC phones. It provides basic support for input | |
| pins, output pins, and irqs. | |
| config HTC_PASIC3 | |
| tristate "HTC PASIC3 LED/DS1WM chip support" | |
| select MFD_CORE | |
| help | |
| This core driver provides register access for the LED/DS1WM | |
| chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
| HTC Magician devices, respectively. Actual functionality is | |
| handled by the leds-pasic3 and ds1wm drivers. | |
| config UCB1400_CORE | |
| tristate "Philips UCB1400 Core driver" | |
| depends on AC97_BUS | |
| depends on GPIOLIB | |
| help | |
| This enables support for the Philips UCB1400 core functions. | |
| The UCB1400 is an AC97 audio codec. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ucb1400_core. | |
| config TPS65010 | |
| tristate "TPS6501x Power Management chips" | |
| depends on I2C && GPIOLIB | |
| default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
| help | |
| If you say yes here you get support for the TPS6501x series of | |
| Power Management chips. These include voltage regulators, | |
| lithium ion/polymer battery charging, and other features that | |
| are often used in portable devices like cell phones and cameras. | |
| This driver can also be built as a module. If so, the module | |
| will be called tps65010. | |
| config MENELAUS | |
| bool "Texas Instruments TWL92330/Menelaus PM chip" | |
| depends on I2C=y && ARCH_OMAP24XX | |
| help | |
| If you say yes here you get support for the Texas Instruments | |
| TWL92330/Menelaus Power Management chip. This include voltage | |
| regulators, Dual slot memory card transceivers, real-time clock | |
| and other features that are often used in portable devices like | |
| cell phones and PDAs. | |
| config TWL4030_CORE | |
| bool "Texas Instruments TWL4030/TPS659x0 Support" | |
| depends on I2C=y && GENERIC_HARDIRQS | |
| help | |
| Say yes here if you have TWL4030 family chip on your board. | |
| This core driver provides register access and IRQ handling | |
| facilities, and registers devices for the various functions | |
| so that function-specific drivers can bind to them. | |
| These multi-function chips are found on many OMAP2 and OMAP3 | |
| boards, providing power management, RTC, GPIO, keypad, a | |
| high speed USB OTG transceiver, an audio codec (on most | |
| versions) and many other features. | |
| config MFD_TMIO | |
| bool | |
| default n | |
| config MFD_T7L66XB | |
| bool "Support Toshiba T7L66XB" | |
| depends on ARM && HAVE_CLK | |
| select MFD_CORE | |
| select MFD_TMIO | |
| help | |
| Support for Toshiba Mobile IO Controller T7L66XB | |
| config MFD_TC6387XB | |
| bool "Support Toshiba TC6387XB" | |
| depends on ARM && HAVE_CLK | |
| select MFD_CORE | |
| select MFD_TMIO | |
| help | |
| Support for Toshiba Mobile IO Controller TC6387XB | |
| config MFD_TC6393XB | |
| bool "Support Toshiba TC6393XB" | |
| depends on GPIOLIB && ARM | |
| select MFD_CORE | |
| select MFD_TMIO | |
| help | |
| Support for Toshiba Mobile IO Controller TC6393XB | |
| config PMIC_DA903X | |
| bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
| depends on I2C=y | |
| help | |
| Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
| ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
| usually found on PXA processors-based platforms. This includes | |
| the I2C driver and the core APIs _only_, you have to select | |
| individual components like LCD backlight, voltage regulators, | |
| LEDs and battery-charger under the corresponding menus. | |
| config MFD_WM8400 | |
| tristate "Support Wolfson Microelectronics WM8400" | |
| select MFD_CORE | |
| depends on I2C | |
| help | |
| Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
| CODEC. This driver provides common support for accessing | |
| the device, additional drivers must be enabled in order to use | |
| the functionality of the device. | |
| config MFD_WM8350 | |
| tristate | |
| config MFD_WM8350_CONFIG_MODE_0 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8350_CONFIG_MODE_1 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8350_CONFIG_MODE_2 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8350_CONFIG_MODE_3 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8351_CONFIG_MODE_0 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8351_CONFIG_MODE_1 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8351_CONFIG_MODE_2 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8351_CONFIG_MODE_3 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8352_CONFIG_MODE_0 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8352_CONFIG_MODE_1 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8352_CONFIG_MODE_2 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8352_CONFIG_MODE_3 | |
| bool | |
| depends on MFD_WM8350 | |
| config MFD_WM8350_I2C | |
| tristate "Support Wolfson Microelectronics WM8350 with I2C" | |
| select MFD_WM8350 | |
| depends on I2C | |
| help | |
| The WM8350 is an integrated audio and power management | |
| subsystem with watchdog and RTC functionality for embedded | |
| systems. This option enables core support for the WM8350 with | |
| I2C as the control interface. Additional options must be | |
| selected to enable support for the functionality of the chip. | |
| config MFD_PCF50633 | |
| tristate "Support for NXP PCF50633" | |
| depends on I2C | |
| help | |
| Say yes here if you have NXP PCF50633 chip on your board. | |
| This core driver provides register access and IRQ handling | |
| facilities, and registers devices for the various functions | |
| so that function-specific drivers can bind to them. | |
| config PCF50633_ADC | |
| tristate "Support for NXP PCF50633 ADC" | |
| depends on MFD_PCF50633 | |
| help | |
| Say yes here if you want to include support for ADC in the | |
| NXP PCF50633 chip. | |
| config PCF50633_GPIO | |
| tristate "Support for NXP PCF50633 GPIO" | |
| depends on MFD_PCF50633 | |
| help | |
| Say yes here if you want to include support GPIO for pins on | |
| the PCF50633 chip. | |
| config AB3100_CORE | |
| tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions" | |
| depends on I2C | |
| default y if ARCH_U300 | |
| help | |
| Select this to enable the AB3100 Mixed Signal IC core | |
| functionality. This connects to a AB3100 on the I2C bus | |
| and expose a number of symbols needed for dependent devices | |
| to read and write registers and subscribe to events from | |
| this multi-functional IC. This is needed to use other features | |
| of the AB3100 such as battery-backed RTC, charging control, | |
| LEDs, vibrator, system power and temperature, power management | |
| and ALSA sound. | |
| config EZX_PCAP | |
| bool "PCAP Support" | |
| depends on GENERIC_HARDIRQS && SPI_MASTER | |
| help | |
| This enables the PCAP ASIC present on EZX Phones. This is | |
| needed for MMC, TouchScreen, Sound, USB, etc.. | |
| endmenu | |
| menu "Multimedia Capabilities Port drivers" | |
| depends on ARCH_SA1100 | |
| config MCP | |
| tristate | |
| # Interface drivers | |
| config MCP_SA11X0 | |
| tristate "Support SA11x0 MCP interface" | |
| depends on ARCH_SA1100 | |
| select MCP | |
| # Chip drivers | |
| config MCP_UCB1200 | |
| tristate "Support for UCB1200 / UCB1300" | |
| depends on MCP | |
| config MCP_UCB1200_TS | |
| tristate "Touchscreen interface support" | |
| depends on MCP_UCB1200 && INPUT | |
| endmenu |