drivers/input/keyboard/Kconfig - linux - Git at Google


            
            #

            
            # Input core configuration

            
            #

            
            menuconfig INPUT_KEYBOARD

            
            	bool "Keyboards" if EMBEDDED || !X86

            
            	default y

            
            	help

            
            	  Say Y here, and a list of supported keyboards will be displayed.

            
            	  This option doesn't affect the kernel.


            	  If unsure, say Y.


            if INPUT_KEYBOARD


            config KEYBOARD_ATKBD

            
            	tristate "AT keyboard" if EMBEDDED || !X86

            
            	default y

            
            	select SERIO

            
            	select SERIO_LIBPS2

            
            	select SERIO_I8042 if X86

            
            	select SERIO_GSCPS2 if GSC

            
            	help

            
            	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually

            
            	  you'll need this, unless you have a different type keyboard (USB, ADB

            
            	  or other). This also works for AT and PS/2 keyboards connected over a

            
            	  PS/2 to serial converter.


            	  If unsure, say Y.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called atkbd.


            config KEYBOARD_ATKBD_HP_KEYCODES

            
            	bool "Use HP keyboard scancodes"

            
            	depends on PARISC && KEYBOARD_ATKBD

            
            	default y

            
            	help

            
            	  Say Y here if you have a PA-RISC machine and want to use an AT or

            
            	  PS/2 keyboard, and your keyboard uses keycodes that are specific to

            
            	  PA-RISC keyboards.


            	  Say N if you use a standard keyboard.


            config KEYBOARD_ATKBD_RDI_KEYCODES

            
            	bool "Use PrecisionBook keyboard scancodes"

            
            	depends on KEYBOARD_ATKBD_HP_KEYCODES

            
            	default n

            
            	help

            
            	  If you have an RDI PrecisionBook, say Y here if you want to use its

            
            	  built-in keyboard (as opposed to an external keyboard).


            	  The PrecisionBook has five keys that conflict with those used by most

            
            	  AT and PS/2 keyboards. These are as follows:


            	    PrecisionBook    Standard AT or PS/2


            	    F1               F12

            
            	    Left Ctrl        Left Alt

            
            	    Caps Lock        Left Ctrl

            
            	    Right Ctrl       Caps Lock

            
            	    Left             102nd key (the key to the right of Left Shift)


            	  If you say N here, and use the PrecisionBook keyboard, then each key

            
            	  in the left-hand column will be interpreted as the corresponding key

            
            	  in the right-hand column.


            	  If you say Y here, and use an external keyboard, then each key in the

            
            	  right-hand column will be interpreted as the key shown in the

            
            	  left-hand column.


            config KEYBOARD_SUNKBD

            
            	tristate "Sun Type 4 and Type 5 keyboard"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,

            
            	  connected either to the Sun keyboard connector or to an serial

            
            	  (RS-232) port via a simple adapter.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called sunkbd.


            config KEYBOARD_LKKBD

            
            	tristate "DECstation/VAXstation LK201/LK401 keyboard"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you want to use a LK201 or LK401 style serial

            
            	  keyboard. This keyboard is also useable on PCs if you attach

            
            	  it with the inputattach program. The connector pinout is

            
            	  described within lkkbd.c.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called lkkbd.


            config KEYBOARD_LOCOMO

            
            	tristate "LoCoMo Keyboard Support"

            
            	depends on SHARP_LOCOMO && INPUT_KEYBOARD

            
            	help

            
            	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called locomokbd.


            config KEYBOARD_XTKBD

            
            	tristate "XT keyboard"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you want to use the old IBM PC/XT keyboard (or

            
            	  compatible) on your system. This is only possible with a

            
            	  parallel port keyboard adapter, you cannot connect it to the

            
            	  keyboard port on a PC that runs Linux.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called xtkbd.


            config KEYBOARD_NEWTON

            
            	tristate "Newton keyboard"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a Newton keyboard on a serial port.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called newtonkbd.


            config KEYBOARD_STOWAWAY

            
            	tristate "Stowaway keyboard"

            
            	select SERIO

            
            	help

            
            	  Say Y here if you have a Stowaway keyboard on a serial port.

            
            	  Stowaway compatible keyboards like Dicota Input-PDA keyboard

            
            	  are also supported by this driver.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called stowaway.


            config KEYBOARD_CORGI

            
            	tristate "Corgi keyboard"

            
            	depends on PXA_SHARPSL

            
            	default y

            
            	help

            
            	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx

            
            	  series of PDAs.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called corgikbd.


            config KEYBOARD_SPITZ

            
            	tristate "Spitz keyboard"

            
            	depends on PXA_SHARPSL

            
            	default y

            
            	help

            
            	  Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,

            
            	  SL-C3000 and Sl-C3100 series of PDAs.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called spitzkbd.


            config KEYBOARD_TOSA

            
            	tristate "Tosa keyboard"

            
            	depends on MACH_TOSA

            
            	default y

            
            	help

            
            	  Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called tosakbd.


            config KEYBOARD_TOSA_USE_EXT_KEYCODES

            
            	bool "Tosa keyboard: use extended keycodes"

            
            	depends on KEYBOARD_TOSA

            
            	default n

            
            	help

            
            	  Say Y here to enable the tosa keyboard driver to generate extended

            
            	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted

            
            	  by either console keyboard driver or by Kdrive keybd driver.


            	  Say Y only if you know, what you are doing!


            config KEYBOARD_AMIGA

            
            	tristate "Amiga keyboard"

            
            	depends on AMIGA

            
            	help

            
            	  Say Y here if you are running Linux on any AMIGA and have a keyboard

            
            	  attached.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called amikbd.


            config ATARI_KBD_CORE

            
            	bool


            config KEYBOARD_ATARI

            
            	tristate "Atari keyboard"

            
            	depends on ATARI

            
            	select ATARI_KBD_CORE

            
            	help

            
            	  Say Y here if you are running Linux on any Atari and have a keyboard

            
            	  attached.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called atakbd.


            config KEYBOARD_HIL_OLD

            
            	tristate "HP HIL keyboard support (simple driver)"

            
            	depends on GSC || HP300

            
            	default y

            
            	help

            
            	  The "Human Interface Loop" is a older, 8-channel USB-like

            
            	  controller used in several Hewlett Packard models. This driver

            
            	  was adapted from the one written for m68k/hp300, and implements

            
            	  support for a keyboard attached to the HIL port, but not for

            
            	  any other types of HIL input devices like mice or tablets.

            
            	  However, it has been thoroughly tested and is stable.


            	  If you want full HIL support including support for multiple

            
            	  keyboards, mice, and tablets, you have to enable the

            
            	  "HP System Device Controller i8042 Support" in the input/serio

            
            	  submenu.


            config KEYBOARD_HIL

            
            	tristate "HP HIL keyboard support"

            
            	depends on GSC || HP300

            
            	default y

            
            	select HP_SDC

            
            	select HIL_MLC

            
            	select SERIO

            
            	help

            
            	  The "Human Interface Loop" is a older, 8-channel USB-like

            
            	  controller used in several Hewlett Packard models.

            
            	  This driver implements support for HIL-keyboards attached

            
            	  to your machine, so normally you should say Y here.


            config KEYBOARD_HP6XX

            
            	tristate "HP Jornada 6xx keyboard"

            
            	depends on SH_HP6XX

            
            	select INPUT_POLLDEV

            
            	help

            
            	  Say Y here if you have a HP Jornada 620/660/680/690 and want to

            
            	  support the built-in keyboard.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called jornada680_kbd.


            config KEYBOARD_HP7XX

            
            	tristate "HP Jornada 7xx keyboard"

            
            	depends on SA1100_JORNADA720_SSP && SA1100_SSP

            
            	help

            
            	  Say Y here if you have a HP Jornada 710/720/728 and want to

            
            	  support the built-in keyboard.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called jornada720_kbd.


            config KEYBOARD_LM8323

            
            	tristate "LM8323 keypad chip"

            
            	depends on I2C

            
            	depends on LEDS_CLASS

            
            	help

            
            	  If you say yes here you get support for the National Semiconductor

            
            	  LM8323 keypad controller.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called lm8323.


            config KEYBOARD_OMAP

            
            	tristate "TI OMAP keypad support"

            
            	depends on (ARCH_OMAP1 || ARCH_OMAP2)

            
            	help

            
            	  Say Y here if you want to use the OMAP keypad.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called omap-keypad.


            config KEYBOARD_PXA27x

            
            	tristate "PXA27x/PXA3xx keypad support"

            
            	depends on PXA27x || PXA3xx

            
            	help

            
            	  Enable support for PXA27x/PXA3xx keypad controller


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called pxa27x_keypad.


            config KEYBOARD_PXA930_ROTARY

            
            	tristate "PXA930/PXA935 Enhanced Rotary Controller Support"

            
            	depends on CPU_PXA930 || CPU_PXA935

            
            	help

            
            	  Enable support for PXA930/PXA935 Enhanced Rotary Controller.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called pxa930_rotary.


            config KEYBOARD_AAED2000

            
            	tristate "AAED-2000 keyboard"

            
            	depends on MACH_AAED2000

            
            	select INPUT_POLLDEV

            
            	default y

            
            	help

            
            	  Say Y here to enable the keyboard on the Agilent AAED-2000

            
            	  development board.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called aaed2000_kbd.


            config KEYBOARD_GPIO

            
            	tristate "GPIO Buttons"

            
            	depends on GENERIC_GPIO

            
            	help

            
            	  This driver implements support for buttons connected

            
            	  to GPIO pins of various CPUs (and some other chips).


            	  Say Y here if your device has buttons connected

            
            	  directly to such GPIO pins.  Your board-specific

            
            	  setup logic must also provide a platform device,

            
            	  with configuration data saying which GPIOs are used.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called gpio-keys.


            config KEYBOARD_MAPLE

            
            	tristate "Maple bus keyboard"

            
            	depends on SH_DREAMCAST && MAPLE

            
            	help

            
            	  Say Y here if you have a Dreamcast console running Linux and have

            
            	  a keyboard attached to its Maple bus.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called maple_keyb.


            config KEYBOARD_BFIN

            
            	tristate "Blackfin BF54x keypad support"

            
            	depends on (BF54x && !BF544)

            
            	help

            
            	  Say Y here if you want to use the BF54x keypad.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called bf54x-keys.


            config KEYBOARD_SH_KEYSC

            
            	tristate "SuperH KEYSC keypad support"

            
            	depends on SUPERH

            
            	help

            
            	  Say Y here if you want to use a keypad attached to the KEYSC block

            
            	  on SuperH processors such as sh7722 and sh7343.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called sh_keysc.


            config KEYBOARD_EP93XX

            
            	tristate "EP93xx Matrix Keypad support"

            
            	depends on ARCH_EP93XX

            
            	help

            
            	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called ep93xx_keypad.


            endif
	#
	# Input core configuration
	#
	menuconfig INPUT_KEYBOARD
	bool "Keyboards" if EMBEDDED \|\| !X86
	default y
	help
	Say Y here, and a list of supported keyboards will be displayed.
	This option doesn't affect the kernel.

	If unsure, say Y.

	if INPUT_KEYBOARD

	config KEYBOARD_ATKBD
	tristate "AT keyboard" if EMBEDDED \|\| !X86
	default y
	select SERIO
	select SERIO_LIBPS2
	select SERIO_I8042 if X86
	select SERIO_GSCPS2 if GSC
	help
	Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
	you'll need this, unless you have a different type keyboard (USB, ADB
	or other). This also works for AT and PS/2 keyboards connected over a
	PS/2 to serial converter.

	If unsure, say Y.

	To compile this driver as a module, choose M here: the
	module will be called atkbd.

	config KEYBOARD_ATKBD_HP_KEYCODES
	bool "Use HP keyboard scancodes"
	depends on PARISC && KEYBOARD_ATKBD
	default y
	help
	Say Y here if you have a PA-RISC machine and want to use an AT or
	PS/2 keyboard, and your keyboard uses keycodes that are specific to
	PA-RISC keyboards.

	Say N if you use a standard keyboard.

	config KEYBOARD_ATKBD_RDI_KEYCODES
	bool "Use PrecisionBook keyboard scancodes"
	depends on KEYBOARD_ATKBD_HP_KEYCODES
	default n
	help
	If you have an RDI PrecisionBook, say Y here if you want to use its
	built-in keyboard (as opposed to an external keyboard).

	The PrecisionBook has five keys that conflict with those used by most
	AT and PS/2 keyboards. These are as follows:

	PrecisionBook Standard AT or PS/2

	F1 F12
	Left Ctrl Left Alt
	Caps Lock Left Ctrl
	Right Ctrl Caps Lock
	Left 102nd key (the key to the right of Left Shift)

	If you say N here, and use the PrecisionBook keyboard, then each key
	in the left-hand column will be interpreted as the corresponding key
	in the right-hand column.

	If you say Y here, and use an external keyboard, then each key in the
	right-hand column will be interpreted as the key shown in the
	left-hand column.

	config KEYBOARD_SUNKBD
	tristate "Sun Type 4 and Type 5 keyboard"
	select SERIO
	help
	Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
	connected either to the Sun keyboard connector or to an serial
	(RS-232) port via a simple adapter.

	To compile this driver as a module, choose M here: the
	module will be called sunkbd.

	config KEYBOARD_LKKBD
	tristate "DECstation/VAXstation LK201/LK401 keyboard"
	select SERIO
	help
	Say Y here if you want to use a LK201 or LK401 style serial
	keyboard. This keyboard is also useable on PCs if you attach
	it with the inputattach program. The connector pinout is
	described within lkkbd.c.

	To compile this driver as a module, choose M here: the
	module will be called lkkbd.

	config KEYBOARD_LOCOMO
	tristate "LoCoMo Keyboard Support"
	depends on SHARP_LOCOMO && INPUT_KEYBOARD
	help
	Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA

	To compile this driver as a module, choose M here: the
	module will be called locomokbd.

	config KEYBOARD_XTKBD
	tristate "XT keyboard"
	select SERIO
	help
	Say Y here if you want to use the old IBM PC/XT keyboard (or
	compatible) on your system. This is only possible with a
	parallel port keyboard adapter, you cannot connect it to the
	keyboard port on a PC that runs Linux.

	To compile this driver as a module, choose M here: the
	module will be called xtkbd.

	config KEYBOARD_NEWTON
	tristate "Newton keyboard"
	select SERIO
	help
	Say Y here if you have a Newton keyboard on a serial port.

	To compile this driver as a module, choose M here: the
	module will be called newtonkbd.

	config KEYBOARD_STOWAWAY
	tristate "Stowaway keyboard"
	select SERIO
	help
	Say Y here if you have a Stowaway keyboard on a serial port.
	Stowaway compatible keyboards like Dicota Input-PDA keyboard
	are also supported by this driver.

	To compile this driver as a module, choose M here: the
	module will be called stowaway.

	config KEYBOARD_CORGI
	tristate "Corgi keyboard"
	depends on PXA_SHARPSL
	default y
	help
	Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx
	series of PDAs.

	To compile this driver as a module, choose M here: the
	module will be called corgikbd.

	config KEYBOARD_SPITZ
	tristate "Spitz keyboard"
	depends on PXA_SHARPSL
	default y
	help
	Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
	SL-C3000 and Sl-C3100 series of PDAs.

	To compile this driver as a module, choose M here: the
	module will be called spitzkbd.

	config KEYBOARD_TOSA
	tristate "Tosa keyboard"
	depends on MACH_TOSA
	default y
	help
	Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)

	To compile this driver as a module, choose M here: the
	module will be called tosakbd.

	config KEYBOARD_TOSA_USE_EXT_KEYCODES
	bool "Tosa keyboard: use extended keycodes"
	depends on KEYBOARD_TOSA
	default n
	help
	Say Y here to enable the tosa keyboard driver to generate extended
	(>= 127) keycodes. Be aware, that they can't be correctly interpreted
	by either console keyboard driver or by Kdrive keybd driver.

	Say Y only if you know, what you are doing!

	config KEYBOARD_AMIGA
	tristate "Amiga keyboard"
	depends on AMIGA
	help
	Say Y here if you are running Linux on any AMIGA and have a keyboard
	attached.

	To compile this driver as a module, choose M here: the
	module will be called amikbd.

	config ATARI_KBD_CORE
	bool

	config KEYBOARD_ATARI
	tristate "Atari keyboard"
	depends on ATARI
	select ATARI_KBD_CORE
	help
	Say Y here if you are running Linux on any Atari and have a keyboard
	attached.

	To compile this driver as a module, choose M here: the
	module will be called atakbd.

	config KEYBOARD_HIL_OLD
	tristate "HP HIL keyboard support (simple driver)"
	depends on GSC \|\| HP300
	default y
	help
	The "Human Interface Loop" is a older, 8-channel USB-like
	controller used in several Hewlett Packard models. This driver
	was adapted from the one written for m68k/hp300, and implements
	support for a keyboard attached to the HIL port, but not for
	any other types of HIL input devices like mice or tablets.
	However, it has been thoroughly tested and is stable.

	If you want full HIL support including support for multiple
	keyboards, mice, and tablets, you have to enable the
	"HP System Device Controller i8042 Support" in the input/serio
	submenu.

	config KEYBOARD_HIL
	tristate "HP HIL keyboard support"
	depends on GSC \|\| HP300
	default y
	select HP_SDC
	select HIL_MLC
	select SERIO
	help
	The "Human Interface Loop" is a older, 8-channel USB-like
	controller used in several Hewlett Packard models.
	This driver implements support for HIL-keyboards attached
	to your machine, so normally you should say Y here.

	config KEYBOARD_HP6XX
	tristate "HP Jornada 6xx keyboard"
	depends on SH_HP6XX
	select INPUT_POLLDEV
	help
	Say Y here if you have a HP Jornada 620/660/680/690 and want to
	support the built-in keyboard.

	To compile this driver as a module, choose M here: the
	module will be called jornada680_kbd.

	config KEYBOARD_HP7XX
	tristate "HP Jornada 7xx keyboard"
	depends on SA1100_JORNADA720_SSP && SA1100_SSP
	help
	Say Y here if you have a HP Jornada 710/720/728 and want to
	support the built-in keyboard.

	To compile this driver as a module, choose M here: the
	module will be called jornada720_kbd.

	config KEYBOARD_LM8323
	tristate "LM8323 keypad chip"
	depends on I2C
	depends on LEDS_CLASS
	help
	If you say yes here you get support for the National Semiconductor
	LM8323 keypad controller.

	To compile this driver as a module, choose M here: the
	module will be called lm8323.

	config KEYBOARD_OMAP
	tristate "TI OMAP keypad support"
	depends on (ARCH_OMAP1 \|\| ARCH_OMAP2)
	help
	Say Y here if you want to use the OMAP keypad.

	To compile this driver as a module, choose M here: the
	module will be called omap-keypad.

	config KEYBOARD_PXA27x
	tristate "PXA27x/PXA3xx keypad support"
	depends on PXA27x \|\| PXA3xx
	help
	Enable support for PXA27x/PXA3xx keypad controller

	To compile this driver as a module, choose M here: the
	module will be called pxa27x_keypad.

	config KEYBOARD_PXA930_ROTARY
	tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
	depends on CPU_PXA930 \|\| CPU_PXA935
	help
	Enable support for PXA930/PXA935 Enhanced Rotary Controller.

	To compile this driver as a module, choose M here: the
	module will be called pxa930_rotary.

	config KEYBOARD_AAED2000
	tristate "AAED-2000 keyboard"
	depends on MACH_AAED2000
	select INPUT_POLLDEV
	default y
	help
	Say Y here to enable the keyboard on the Agilent AAED-2000
	development board.

	To compile this driver as a module, choose M here: the
	module will be called aaed2000_kbd.

	config KEYBOARD_GPIO
	tristate "GPIO Buttons"
	depends on GENERIC_GPIO
	help
	This driver implements support for buttons connected
	to GPIO pins of various CPUs (and some other chips).

	Say Y here if your device has buttons connected
	directly to such GPIO pins. Your board-specific
	setup logic must also provide a platform device,
	with configuration data saying which GPIOs are used.

	To compile this driver as a module, choose M here: the
	module will be called gpio-keys.

	config KEYBOARD_MAPLE
	tristate "Maple bus keyboard"
	depends on SH_DREAMCAST && MAPLE
	help
	Say Y here if you have a Dreamcast console running Linux and have
	a keyboard attached to its Maple bus.

	To compile this driver as a module, choose M here: the
	module will be called maple_keyb.

	config KEYBOARD_BFIN
	tristate "Blackfin BF54x keypad support"
	depends on (BF54x && !BF544)
	help
	Say Y here if you want to use the BF54x keypad.

	To compile this driver as a module, choose M here: the
	module will be called bf54x-keys.

	config KEYBOARD_SH_KEYSC
	tristate "SuperH KEYSC keypad support"
	depends on SUPERH
	help
	Say Y here if you want to use a keypad attached to the KEYSC block
	on SuperH processors such as sh7722 and sh7343.

	To compile this driver as a module, choose M here: the
	module will be called sh_keysc.

	config KEYBOARD_EP93XX
	tristate "EP93xx Matrix Keypad support"
	depends on ARCH_EP93XX
	help
	Say Y here to enable the matrix keypad on the Cirrus EP93XX.

	To compile this driver as a module, choose M here: the
	module will be called ep93xx_keypad.

	endif