| /* | |
| * Copyright © 2006-2007 Intel Corporation | |
| * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER | |
| * DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * Eric Anholt <eric@anholt.net> | |
| * Dave Airlie <airlied@linux.ie> | |
| * Jesse Barnes <jesse.barnes@intel.com> | |
| */ | |
| #include <linux/dmi.h> | |
| #include <linux/i2c.h> | |
| #include "drmP.h" | |
| #include "drm.h" | |
| #include "drm_crtc.h" | |
| #include "drm_edid.h" | |
| #include "intel_drv.h" | |
| #include "i915_drm.h" | |
| #include "i915_drv.h" | |
| #define I915_LVDS "i915_lvds" | |
| /* | |
| * the following four scaling options are defined. | |
| * #define DRM_MODE_SCALE_NON_GPU 0 | |
| * #define DRM_MODE_SCALE_FULLSCREEN 1 | |
| * #define DRM_MODE_SCALE_NO_SCALE 2 | |
| * #define DRM_MODE_SCALE_ASPECT 3 | |
| */ | |
| /* Private structure for the integrated LVDS support */ | |
| struct intel_lvds_priv { | |
| int fitting_mode; | |
| u32 pfit_control; | |
| u32 pfit_pgm_ratios; | |
| }; | |
| /** | |
| * Sets the backlight level. | |
| * | |
| * \param level backlight level, from 0 to intel_lvds_get_max_backlight(). | |
| */ | |
| static void intel_lvds_set_backlight(struct drm_device *dev, int level) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 blc_pwm_ctl, reg; | |
| if (IS_IGDNG(dev)) | |
| reg = BLC_PWM_CPU_CTL; | |
| else | |
| reg = BLC_PWM_CTL; | |
| blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK; | |
| I915_WRITE(reg, (blc_pwm_ctl | | |
| (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); | |
| } | |
| /** | |
| * Returns the maximum level of the backlight duty cycle field. | |
| */ | |
| static u32 intel_lvds_get_max_backlight(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 reg; | |
| if (IS_IGDNG(dev)) | |
| reg = BLC_PWM_PCH_CTL2; | |
| else | |
| reg = BLC_PWM_CTL; | |
| return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >> | |
| BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; | |
| } | |
| /** | |
| * Sets the power state for the panel. | |
| */ | |
| static void intel_lvds_set_power(struct drm_device *dev, bool on) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 pp_status, ctl_reg, status_reg; | |
| if (IS_IGDNG(dev)) { | |
| ctl_reg = PCH_PP_CONTROL; | |
| status_reg = PCH_PP_STATUS; | |
| } else { | |
| ctl_reg = PP_CONTROL; | |
| status_reg = PP_STATUS; | |
| } | |
| if (on) { | |
| I915_WRITE(ctl_reg, I915_READ(ctl_reg) | | |
| POWER_TARGET_ON); | |
| do { | |
| pp_status = I915_READ(status_reg); | |
| } while ((pp_status & PP_ON) == 0); | |
| intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle); | |
| } else { | |
| intel_lvds_set_backlight(dev, 0); | |
| I915_WRITE(ctl_reg, I915_READ(ctl_reg) & | |
| ~POWER_TARGET_ON); | |
| do { | |
| pp_status = I915_READ(status_reg); | |
| } while (pp_status & PP_ON); | |
| } | |
| } | |
| static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) | |
| { | |
| struct drm_device *dev = encoder->dev; | |
| if (mode == DRM_MODE_DPMS_ON) | |
| intel_lvds_set_power(dev, true); | |
| else | |
| intel_lvds_set_power(dev, false); | |
| /* XXX: We never power down the LVDS pairs. */ | |
| } | |
| static void intel_lvds_save(struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; | |
| u32 pwm_ctl_reg; | |
| if (IS_IGDNG(dev)) { | |
| pp_on_reg = PCH_PP_ON_DELAYS; | |
| pp_off_reg = PCH_PP_OFF_DELAYS; | |
| pp_ctl_reg = PCH_PP_CONTROL; | |
| pp_div_reg = PCH_PP_DIVISOR; | |
| pwm_ctl_reg = BLC_PWM_CPU_CTL; | |
| } else { | |
| pp_on_reg = PP_ON_DELAYS; | |
| pp_off_reg = PP_OFF_DELAYS; | |
| pp_ctl_reg = PP_CONTROL; | |
| pp_div_reg = PP_DIVISOR; | |
| pwm_ctl_reg = BLC_PWM_CTL; | |
| } | |
| dev_priv->savePP_ON = I915_READ(pp_on_reg); | |
| dev_priv->savePP_OFF = I915_READ(pp_off_reg); | |
| dev_priv->savePP_CONTROL = I915_READ(pp_ctl_reg); | |
| dev_priv->savePP_DIVISOR = I915_READ(pp_div_reg); | |
| dev_priv->saveBLC_PWM_CTL = I915_READ(pwm_ctl_reg); | |
| dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & | |
| BACKLIGHT_DUTY_CYCLE_MASK); | |
| /* | |
| * If the light is off at server startup, just make it full brightness | |
| */ | |
| if (dev_priv->backlight_duty_cycle == 0) | |
| dev_priv->backlight_duty_cycle = | |
| intel_lvds_get_max_backlight(dev); | |
| } | |
| static void intel_lvds_restore(struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg; | |
| u32 pwm_ctl_reg; | |
| if (IS_IGDNG(dev)) { | |
| pp_on_reg = PCH_PP_ON_DELAYS; | |
| pp_off_reg = PCH_PP_OFF_DELAYS; | |
| pp_ctl_reg = PCH_PP_CONTROL; | |
| pp_div_reg = PCH_PP_DIVISOR; | |
| pwm_ctl_reg = BLC_PWM_CPU_CTL; | |
| } else { | |
| pp_on_reg = PP_ON_DELAYS; | |
| pp_off_reg = PP_OFF_DELAYS; | |
| pp_ctl_reg = PP_CONTROL; | |
| pp_div_reg = PP_DIVISOR; | |
| pwm_ctl_reg = BLC_PWM_CTL; | |
| } | |
| I915_WRITE(pwm_ctl_reg, dev_priv->saveBLC_PWM_CTL); | |
| I915_WRITE(pp_on_reg, dev_priv->savePP_ON); | |
| I915_WRITE(pp_off_reg, dev_priv->savePP_OFF); | |
| I915_WRITE(pp_div_reg, dev_priv->savePP_DIVISOR); | |
| I915_WRITE(pp_ctl_reg, dev_priv->savePP_CONTROL); | |
| if (dev_priv->savePP_CONTROL & POWER_TARGET_ON) | |
| intel_lvds_set_power(dev, true); | |
| else | |
| intel_lvds_set_power(dev, false); | |
| } | |
| static int intel_lvds_mode_valid(struct drm_connector *connector, | |
| struct drm_display_mode *mode) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode; | |
| if (fixed_mode) { | |
| if (mode->hdisplay > fixed_mode->hdisplay) | |
| return MODE_PANEL; | |
| if (mode->vdisplay > fixed_mode->vdisplay) | |
| return MODE_PANEL; | |
| } | |
| return MODE_OK; | |
| } | |
| static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, | |
| struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode) | |
| { | |
| /* | |
| * float point operation is not supported . So the PANEL_RATIO_FACTOR | |
| * is defined, which can avoid the float point computation when | |
| * calculating the panel ratio. | |
| */ | |
| #define PANEL_RATIO_FACTOR 8192 | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); | |
| struct drm_encoder *tmp_encoder; | |
| struct intel_output *intel_output = enc_to_intel_output(encoder); | |
| struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; | |
| u32 pfit_control = 0, pfit_pgm_ratios = 0; | |
| int left_border = 0, right_border = 0, top_border = 0; | |
| int bottom_border = 0; | |
| bool border = 0; | |
| int panel_ratio, desired_ratio, vert_scale, horiz_scale; | |
| int horiz_ratio, vert_ratio; | |
| u32 hsync_width, vsync_width; | |
| u32 hblank_width, vblank_width; | |
| u32 hsync_pos, vsync_pos; | |
| /* Should never happen!! */ | |
| if (!IS_I965G(dev) && intel_crtc->pipe == 0) { | |
| printk(KERN_ERR "Can't support LVDS on pipe A\n"); | |
| return false; | |
| } | |
| /* Should never happen!! */ | |
| list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { | |
| if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { | |
| printk(KERN_ERR "Can't enable LVDS and another " | |
| "encoder on the same pipe\n"); | |
| return false; | |
| } | |
| } | |
| /* If we don't have a panel mode, there is nothing we can do */ | |
| if (dev_priv->panel_fixed_mode == NULL) | |
| return true; | |
| /* | |
| * If we have timings from the BIOS for the panel, put them in | |
| * to the adjusted mode. The CRTC will be set up for this mode, | |
| * with the panel scaling set up to source from the H/VDisplay | |
| * of the original mode. | |
| */ | |
| if (dev_priv->panel_fixed_mode != NULL) { | |
| adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay; | |
| adjusted_mode->hsync_start = | |
| dev_priv->panel_fixed_mode->hsync_start; | |
| adjusted_mode->hsync_end = | |
| dev_priv->panel_fixed_mode->hsync_end; | |
| adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal; | |
| adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay; | |
| adjusted_mode->vsync_start = | |
| dev_priv->panel_fixed_mode->vsync_start; | |
| adjusted_mode->vsync_end = | |
| dev_priv->panel_fixed_mode->vsync_end; | |
| adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal; | |
| adjusted_mode->clock = dev_priv->panel_fixed_mode->clock; | |
| drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); | |
| } | |
| /* Make sure pre-965s set dither correctly */ | |
| if (!IS_I965G(dev)) { | |
| if (dev_priv->panel_wants_dither || dev_priv->lvds_dither) | |
| pfit_control |= PANEL_8TO6_DITHER_ENABLE; | |
| } | |
| /* Native modes don't need fitting */ | |
| if (adjusted_mode->hdisplay == mode->hdisplay && | |
| adjusted_mode->vdisplay == mode->vdisplay) { | |
| pfit_pgm_ratios = 0; | |
| border = 0; | |
| goto out; | |
| } | |
| /* 965+ wants fuzzy fitting */ | |
| if (IS_I965G(dev)) | |
| pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) | | |
| PFIT_FILTER_FUZZY; | |
| hsync_width = adjusted_mode->crtc_hsync_end - | |
| adjusted_mode->crtc_hsync_start; | |
| vsync_width = adjusted_mode->crtc_vsync_end - | |
| adjusted_mode->crtc_vsync_start; | |
| hblank_width = adjusted_mode->crtc_hblank_end - | |
| adjusted_mode->crtc_hblank_start; | |
| vblank_width = adjusted_mode->crtc_vblank_end - | |
| adjusted_mode->crtc_vblank_start; | |
| /* | |
| * Deal with panel fitting options. Figure out how to stretch the | |
| * image based on its aspect ratio & the current panel fitting mode. | |
| */ | |
| panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR / | |
| adjusted_mode->vdisplay; | |
| desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR / | |
| mode->vdisplay; | |
| /* | |
| * Enable automatic panel scaling for non-native modes so that they fill | |
| * the screen. Should be enabled before the pipe is enabled, according | |
| * to register description and PRM. | |
| * Change the value here to see the borders for debugging | |
| */ | |
| I915_WRITE(BCLRPAT_A, 0); | |
| I915_WRITE(BCLRPAT_B, 0); | |
| switch (lvds_priv->fitting_mode) { | |
| case DRM_MODE_SCALE_NO_SCALE: | |
| /* | |
| * For centered modes, we have to calculate border widths & | |
| * heights and modify the values programmed into the CRTC. | |
| */ | |
| left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2; | |
| right_border = left_border; | |
| if (mode->hdisplay & 1) | |
| right_border++; | |
| top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2; | |
| bottom_border = top_border; | |
| if (mode->vdisplay & 1) | |
| bottom_border++; | |
| /* Set active & border values */ | |
| adjusted_mode->crtc_hdisplay = mode->hdisplay; | |
| /* Keep the boder be even */ | |
| if (right_border & 1) | |
| right_border++; | |
| /* use the border directly instead of border minuse one */ | |
| adjusted_mode->crtc_hblank_start = mode->hdisplay + | |
| right_border; | |
| /* keep the blank width constant */ | |
| adjusted_mode->crtc_hblank_end = | |
| adjusted_mode->crtc_hblank_start + hblank_width; | |
| /* get the hsync pos relative to hblank start */ | |
| hsync_pos = (hblank_width - hsync_width) / 2; | |
| /* keep the hsync pos be even */ | |
| if (hsync_pos & 1) | |
| hsync_pos++; | |
| adjusted_mode->crtc_hsync_start = | |
| adjusted_mode->crtc_hblank_start + hsync_pos; | |
| /* keep the hsync width constant */ | |
| adjusted_mode->crtc_hsync_end = | |
| adjusted_mode->crtc_hsync_start + hsync_width; | |
| adjusted_mode->crtc_vdisplay = mode->vdisplay; | |
| /* use the border instead of border minus one */ | |
| adjusted_mode->crtc_vblank_start = mode->vdisplay + | |
| bottom_border; | |
| /* keep the vblank width constant */ | |
| adjusted_mode->crtc_vblank_end = | |
| adjusted_mode->crtc_vblank_start + vblank_width; | |
| /* get the vsync start postion relative to vblank start */ | |
| vsync_pos = (vblank_width - vsync_width) / 2; | |
| adjusted_mode->crtc_vsync_start = | |
| adjusted_mode->crtc_vblank_start + vsync_pos; | |
| /* keep the vsync width constant */ | |
| adjusted_mode->crtc_vsync_end = | |
| adjusted_mode->crtc_vblank_start + vsync_width; | |
| border = 1; | |
| break; | |
| case DRM_MODE_SCALE_ASPECT: | |
| /* Scale but preserve the spect ratio */ | |
| pfit_control |= PFIT_ENABLE; | |
| if (IS_I965G(dev)) { | |
| /* 965+ is easy, it does everything in hw */ | |
| if (panel_ratio > desired_ratio) | |
| pfit_control |= PFIT_SCALING_PILLAR; | |
| else if (panel_ratio < desired_ratio) | |
| pfit_control |= PFIT_SCALING_LETTER; | |
| else | |
| pfit_control |= PFIT_SCALING_AUTO; | |
| } else { | |
| /* | |
| * For earlier chips we have to calculate the scaling | |
| * ratio by hand and program it into the | |
| * PFIT_PGM_RATIO register | |
| */ | |
| u32 horiz_bits, vert_bits, bits = 12; | |
| horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/ | |
| adjusted_mode->hdisplay; | |
| vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/ | |
| adjusted_mode->vdisplay; | |
| horiz_scale = adjusted_mode->hdisplay * | |
| PANEL_RATIO_FACTOR / mode->hdisplay; | |
| vert_scale = adjusted_mode->vdisplay * | |
| PANEL_RATIO_FACTOR / mode->vdisplay; | |
| /* retain aspect ratio */ | |
| if (panel_ratio > desired_ratio) { /* Pillar */ | |
| u32 scaled_width; | |
| scaled_width = mode->hdisplay * vert_scale / | |
| PANEL_RATIO_FACTOR; | |
| horiz_ratio = vert_ratio; | |
| pfit_control |= (VERT_AUTO_SCALE | | |
| VERT_INTERP_BILINEAR | | |
| HORIZ_INTERP_BILINEAR); | |
| /* Pillar will have left/right borders */ | |
| left_border = (adjusted_mode->hdisplay - | |
| scaled_width) / 2; | |
| right_border = left_border; | |
| if (mode->hdisplay & 1) /* odd resolutions */ | |
| right_border++; | |
| /* keep the border be even */ | |
| if (right_border & 1) | |
| right_border++; | |
| adjusted_mode->crtc_hdisplay = scaled_width; | |
| /* use border instead of border minus one */ | |
| adjusted_mode->crtc_hblank_start = | |
| scaled_width + right_border; | |
| /* keep the hblank width constant */ | |
| adjusted_mode->crtc_hblank_end = | |
| adjusted_mode->crtc_hblank_start + | |
| hblank_width; | |
| /* | |
| * get the hsync start pos relative to | |
| * hblank start | |
| */ | |
| hsync_pos = (hblank_width - hsync_width) / 2; | |
| /* keep the hsync_pos be even */ | |
| if (hsync_pos & 1) | |
| hsync_pos++; | |
| adjusted_mode->crtc_hsync_start = | |
| adjusted_mode->crtc_hblank_start + | |
| hsync_pos; | |
| /* keept hsync width constant */ | |
| adjusted_mode->crtc_hsync_end = | |
| adjusted_mode->crtc_hsync_start + | |
| hsync_width; | |
| border = 1; | |
| } else if (panel_ratio < desired_ratio) { /* letter */ | |
| u32 scaled_height = mode->vdisplay * | |
| horiz_scale / PANEL_RATIO_FACTOR; | |
| vert_ratio = horiz_ratio; | |
| pfit_control |= (HORIZ_AUTO_SCALE | | |
| VERT_INTERP_BILINEAR | | |
| HORIZ_INTERP_BILINEAR); | |
| /* Letterbox will have top/bottom border */ | |
| top_border = (adjusted_mode->vdisplay - | |
| scaled_height) / 2; | |
| bottom_border = top_border; | |
| if (mode->vdisplay & 1) | |
| bottom_border++; | |
| adjusted_mode->crtc_vdisplay = scaled_height; | |
| /* use border instead of border minus one */ | |
| adjusted_mode->crtc_vblank_start = | |
| scaled_height + bottom_border; | |
| /* keep the vblank width constant */ | |
| adjusted_mode->crtc_vblank_end = | |
| adjusted_mode->crtc_vblank_start + | |
| vblank_width; | |
| /* | |
| * get the vsync start pos relative to | |
| * vblank start | |
| */ | |
| vsync_pos = (vblank_width - vsync_width) / 2; | |
| adjusted_mode->crtc_vsync_start = | |
| adjusted_mode->crtc_vblank_start + | |
| vsync_pos; | |
| /* keep the vsync width constant */ | |
| adjusted_mode->crtc_vsync_end = | |
| adjusted_mode->crtc_vsync_start + | |
| vsync_width; | |
| border = 1; | |
| } else { | |
| /* Aspects match, Let hw scale both directions */ | |
| pfit_control |= (VERT_AUTO_SCALE | | |
| HORIZ_AUTO_SCALE | | |
| VERT_INTERP_BILINEAR | | |
| HORIZ_INTERP_BILINEAR); | |
| } | |
| horiz_bits = (1 << bits) * horiz_ratio / | |
| PANEL_RATIO_FACTOR; | |
| vert_bits = (1 << bits) * vert_ratio / | |
| PANEL_RATIO_FACTOR; | |
| pfit_pgm_ratios = | |
| ((vert_bits << PFIT_VERT_SCALE_SHIFT) & | |
| PFIT_VERT_SCALE_MASK) | | |
| ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) & | |
| PFIT_HORIZ_SCALE_MASK); | |
| } | |
| break; | |
| case DRM_MODE_SCALE_FULLSCREEN: | |
| /* | |
| * Full scaling, even if it changes the aspect ratio. | |
| * Fortunately this is all done for us in hw. | |
| */ | |
| pfit_control |= PFIT_ENABLE; | |
| if (IS_I965G(dev)) | |
| pfit_control |= PFIT_SCALING_AUTO; | |
| else | |
| pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | | |
| VERT_INTERP_BILINEAR | | |
| HORIZ_INTERP_BILINEAR); | |
| break; | |
| default: | |
| break; | |
| } | |
| out: | |
| lvds_priv->pfit_control = pfit_control; | |
| lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; | |
| /* | |
| * XXX: It would be nice to support lower refresh rates on the | |
| * panels to reduce power consumption, and perhaps match the | |
| * user's requested refresh rate. | |
| */ | |
| return true; | |
| } | |
| static void intel_lvds_prepare(struct drm_encoder *encoder) | |
| { | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| u32 reg; | |
| if (IS_IGDNG(dev)) | |
| reg = BLC_PWM_CPU_CTL; | |
| else | |
| reg = BLC_PWM_CTL; | |
| dev_priv->saveBLC_PWM_CTL = I915_READ(reg); | |
| dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL & | |
| BACKLIGHT_DUTY_CYCLE_MASK); | |
| intel_lvds_set_power(dev, false); | |
| } | |
| static void intel_lvds_commit( struct drm_encoder *encoder) | |
| { | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| if (dev_priv->backlight_duty_cycle == 0) | |
| dev_priv->backlight_duty_cycle = | |
| intel_lvds_get_max_backlight(dev); | |
| intel_lvds_set_power(dev, true); | |
| } | |
| static void intel_lvds_mode_set(struct drm_encoder *encoder, | |
| struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode) | |
| { | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_output *intel_output = enc_to_intel_output(encoder); | |
| struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; | |
| /* | |
| * The LVDS pin pair will already have been turned on in the | |
| * intel_crtc_mode_set since it has a large impact on the DPLL | |
| * settings. | |
| */ | |
| /* No panel fitting yet, fixme */ | |
| if (IS_IGDNG(dev)) | |
| return; | |
| /* | |
| * Enable automatic panel scaling so that non-native modes fill the | |
| * screen. Should be enabled before the pipe is enabled, according to | |
| * register description and PRM. | |
| */ | |
| I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios); | |
| I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control); | |
| } | |
| /** | |
| * Detect the LVDS connection. | |
| * | |
| * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have | |
| * been set up if the LVDS was actually connected anyway. | |
| */ | |
| static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector) | |
| { | |
| return connector_status_connected; | |
| } | |
| /** | |
| * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. | |
| */ | |
| static int intel_lvds_get_modes(struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| int ret = 0; | |
| ret = intel_ddc_get_modes(intel_output); | |
| if (ret) | |
| return ret; | |
| /* Didn't get an EDID, so | |
| * Set wide sync ranges so we get all modes | |
| * handed to valid_mode for checking | |
| */ | |
| connector->display_info.min_vfreq = 0; | |
| connector->display_info.max_vfreq = 200; | |
| connector->display_info.min_hfreq = 0; | |
| connector->display_info.max_hfreq = 200; | |
| if (dev_priv->panel_fixed_mode != NULL) { | |
| struct drm_display_mode *mode; | |
| mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); | |
| drm_mode_probed_add(connector, mode); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * intel_lvds_destroy - unregister and free LVDS structures | |
| * @connector: connector to free | |
| * | |
| * Unregister the DDC bus for this connector then free the driver private | |
| * structure. | |
| */ | |
| static void intel_lvds_destroy(struct drm_connector *connector) | |
| { | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| if (intel_output->ddc_bus) | |
| intel_i2c_destroy(intel_output->ddc_bus); | |
| drm_sysfs_connector_remove(connector); | |
| drm_connector_cleanup(connector); | |
| kfree(connector); | |
| } | |
| static int intel_lvds_set_property(struct drm_connector *connector, | |
| struct drm_property *property, | |
| uint64_t value) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct intel_output *intel_output = | |
| to_intel_output(connector); | |
| if (property == dev->mode_config.scaling_mode_property && | |
| connector->encoder) { | |
| struct drm_crtc *crtc = connector->encoder->crtc; | |
| struct intel_lvds_priv *lvds_priv = intel_output->dev_priv; | |
| if (value == DRM_MODE_SCALE_NON_GPU) { | |
| DRM_DEBUG_KMS(I915_LVDS, | |
| "non_GPU property is unsupported\n"); | |
| return 0; | |
| } | |
| if (lvds_priv->fitting_mode == value) { | |
| /* the LVDS scaling property is not changed */ | |
| return 0; | |
| } | |
| lvds_priv->fitting_mode = value; | |
| if (crtc && crtc->enabled) { | |
| /* | |
| * If the CRTC is enabled, the display will be changed | |
| * according to the new panel fitting mode. | |
| */ | |
| drm_crtc_helper_set_mode(crtc, &crtc->mode, | |
| crtc->x, crtc->y, crtc->fb); | |
| } | |
| } | |
| return 0; | |
| } | |
| static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { | |
| .dpms = intel_lvds_dpms, | |
| .mode_fixup = intel_lvds_mode_fixup, | |
| .prepare = intel_lvds_prepare, | |
| .mode_set = intel_lvds_mode_set, | |
| .commit = intel_lvds_commit, | |
| }; | |
| static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { | |
| .get_modes = intel_lvds_get_modes, | |
| .mode_valid = intel_lvds_mode_valid, | |
| .best_encoder = intel_best_encoder, | |
| }; | |
| static const struct drm_connector_funcs intel_lvds_connector_funcs = { | |
| .dpms = drm_helper_connector_dpms, | |
| .save = intel_lvds_save, | |
| .restore = intel_lvds_restore, | |
| .detect = intel_lvds_detect, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .set_property = intel_lvds_set_property, | |
| .destroy = intel_lvds_destroy, | |
| }; | |
| static void intel_lvds_enc_destroy(struct drm_encoder *encoder) | |
| { | |
| drm_encoder_cleanup(encoder); | |
| } | |
| static const struct drm_encoder_funcs intel_lvds_enc_funcs = { | |
| .destroy = intel_lvds_enc_destroy, | |
| }; | |
| static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) | |
| { | |
| DRM_DEBUG_KMS(I915_LVDS, | |
| "Skipping LVDS initialization for %s\n", id->ident); | |
| return 1; | |
| } | |
| /* These systems claim to have LVDS, but really don't */ | |
| static const struct dmi_system_id intel_no_lvds[] = { | |
| { | |
| .callback = intel_no_lvds_dmi_callback, | |
| .ident = "Apple Mac Mini (Core series)", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Apple"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), | |
| }, | |
| }, | |
| { | |
| .callback = intel_no_lvds_dmi_callback, | |
| .ident = "Apple Mac Mini (Core 2 series)", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Apple"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), | |
| }, | |
| }, | |
| { | |
| .callback = intel_no_lvds_dmi_callback, | |
| .ident = "MSI IM-945GSE-A", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "MSI"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"), | |
| }, | |
| }, | |
| { | |
| .callback = intel_no_lvds_dmi_callback, | |
| .ident = "Dell Studio Hybrid", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"), | |
| }, | |
| }, | |
| { | |
| .callback = intel_no_lvds_dmi_callback, | |
| .ident = "AOpen Mini PC", | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "AOpen"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"), | |
| }, | |
| }, | |
| { | |
| .callback = intel_no_lvds_dmi_callback, | |
| .ident = "Aopen i945GTt-VFA", | |
| .matches = { | |
| DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"), | |
| }, | |
| }, | |
| { } /* terminating entry */ | |
| }; | |
| /** | |
| * intel_lvds_init - setup LVDS connectors on this device | |
| * @dev: drm device | |
| * | |
| * Create the connector, register the LVDS DDC bus, and try to figure out what | |
| * modes we can display on the LVDS panel (if present). | |
| */ | |
| void intel_lvds_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_output *intel_output; | |
| struct drm_connector *connector; | |
| struct drm_encoder *encoder; | |
| struct drm_display_mode *scan; /* *modes, *bios_mode; */ | |
| struct drm_crtc *crtc; | |
| struct intel_lvds_priv *lvds_priv; | |
| u32 lvds; | |
| int pipe, gpio = GPIOC; | |
| /* Skip init on machines we know falsely report LVDS */ | |
| if (dmi_check_system(intel_no_lvds)) | |
| return; | |
| if (IS_IGDNG(dev)) { | |
| if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0) | |
| return; | |
| gpio = PCH_GPIOC; | |
| } | |
| intel_output = kzalloc(sizeof(struct intel_output) + | |
| sizeof(struct intel_lvds_priv), GFP_KERNEL); | |
| if (!intel_output) { | |
| return; | |
| } | |
| connector = &intel_output->base; | |
| encoder = &intel_output->enc; | |
| drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs, | |
| DRM_MODE_CONNECTOR_LVDS); | |
| drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs, | |
| DRM_MODE_ENCODER_LVDS); | |
| drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); | |
| intel_output->type = INTEL_OUTPUT_LVDS; | |
| drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs); | |
| drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs); | |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; | |
| connector->interlace_allowed = false; | |
| connector->doublescan_allowed = false; | |
| lvds_priv = (struct intel_lvds_priv *)(intel_output + 1); | |
| intel_output->dev_priv = lvds_priv; | |
| /* create the scaling mode property */ | |
| drm_mode_create_scaling_mode_property(dev); | |
| /* | |
| * the initial panel fitting mode will be FULL_SCREEN. | |
| */ | |
| drm_connector_attach_property(&intel_output->base, | |
| dev->mode_config.scaling_mode_property, | |
| DRM_MODE_SCALE_FULLSCREEN); | |
| lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN; | |
| /* | |
| * LVDS discovery: | |
| * 1) check for EDID on DDC | |
| * 2) check for VBT data | |
| * 3) check to see if LVDS is already on | |
| * if none of the above, no panel | |
| * 4) make sure lid is open | |
| * if closed, act like it's not there for now | |
| */ | |
| /* Set up the DDC bus. */ | |
| intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C"); | |
| if (!intel_output->ddc_bus) { | |
| dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " | |
| "failed.\n"); | |
| goto failed; | |
| } | |
| /* | |
| * Attempt to get the fixed panel mode from DDC. Assume that the | |
| * preferred mode is the right one. | |
| */ | |
| intel_ddc_get_modes(intel_output); | |
| list_for_each_entry(scan, &connector->probed_modes, head) { | |
| mutex_lock(&dev->mode_config.mutex); | |
| if (scan->type & DRM_MODE_TYPE_PREFERRED) { | |
| dev_priv->panel_fixed_mode = | |
| drm_mode_duplicate(dev, scan); | |
| mutex_unlock(&dev->mode_config.mutex); | |
| goto out; | |
| } | |
| mutex_unlock(&dev->mode_config.mutex); | |
| } | |
| /* Failed to get EDID, what about VBT? */ | |
| if (dev_priv->lfp_lvds_vbt_mode) { | |
| mutex_lock(&dev->mode_config.mutex); | |
| dev_priv->panel_fixed_mode = | |
| drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); | |
| mutex_unlock(&dev->mode_config.mutex); | |
| if (dev_priv->panel_fixed_mode) { | |
| dev_priv->panel_fixed_mode->type |= | |
| DRM_MODE_TYPE_PREFERRED; | |
| goto out; | |
| } | |
| } | |
| /* | |
| * If we didn't get EDID, try checking if the panel is already turned | |
| * on. If so, assume that whatever is currently programmed is the | |
| * correct mode. | |
| */ | |
| /* IGDNG: FIXME if still fail, not try pipe mode now */ | |
| if (IS_IGDNG(dev)) | |
| goto failed; | |
| lvds = I915_READ(LVDS); | |
| pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; | |
| crtc = intel_get_crtc_from_pipe(dev, pipe); | |
| if (crtc && (lvds & LVDS_PORT_EN)) { | |
| dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc); | |
| if (dev_priv->panel_fixed_mode) { | |
| dev_priv->panel_fixed_mode->type |= | |
| DRM_MODE_TYPE_PREFERRED; | |
| goto out; | |
| } | |
| } | |
| /* If we still don't have a mode after all that, give up. */ | |
| if (!dev_priv->panel_fixed_mode) | |
| goto failed; | |
| out: | |
| if (IS_IGDNG(dev)) { | |
| u32 pwm; | |
| /* make sure PWM is enabled */ | |
| pwm = I915_READ(BLC_PWM_CPU_CTL2); | |
| pwm |= (PWM_ENABLE | PWM_PIPE_B); | |
| I915_WRITE(BLC_PWM_CPU_CTL2, pwm); | |
| pwm = I915_READ(BLC_PWM_PCH_CTL1); | |
| pwm |= PWM_PCH_ENABLE; | |
| I915_WRITE(BLC_PWM_PCH_CTL1, pwm); | |
| } | |
| drm_sysfs_connector_add(connector); | |
| return; | |
| failed: | |
| DRM_DEBUG_KMS(I915_LVDS, "No LVDS modes found, disabling.\n"); | |
| if (intel_output->ddc_bus) | |
| intel_i2c_destroy(intel_output->ddc_bus); | |
| drm_connector_cleanup(connector); | |
| kfree(intel_output); | |
| } |