| /* | |
| * Copyright 2006 Dave Airlie <airlied@linux.ie> | |
| * Copyright © 2006-2007 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER | |
| * DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * Eric Anholt <eric@anholt.net> | |
| */ | |
| #include <linux/i2c.h> | |
| #include "drmP.h" | |
| #include "drm.h" | |
| #include "drm_crtc.h" | |
| #include "intel_drv.h" | |
| #include "i915_drm.h" | |
| #include "i915_drv.h" | |
| #include "dvo.h" | |
| #define SIL164_ADDR 0x38 | |
| #define CH7xxx_ADDR 0x76 | |
| #define TFP410_ADDR 0x38 | |
| static struct intel_dvo_device intel_dvo_devices[] = { | |
| { | |
| .type = INTEL_DVO_CHIP_TMDS, | |
| .name = "sil164", | |
| .dvo_reg = DVOC, | |
| .slave_addr = SIL164_ADDR, | |
| .dev_ops = &sil164_ops, | |
| }, | |
| { | |
| .type = INTEL_DVO_CHIP_TMDS, | |
| .name = "ch7xxx", | |
| .dvo_reg = DVOC, | |
| .slave_addr = CH7xxx_ADDR, | |
| .dev_ops = &ch7xxx_ops, | |
| }, | |
| { | |
| .type = INTEL_DVO_CHIP_LVDS, | |
| .name = "ivch", | |
| .dvo_reg = DVOA, | |
| .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ | |
| .dev_ops = &ivch_ops, | |
| }, | |
| { | |
| .type = INTEL_DVO_CHIP_TMDS, | |
| .name = "tfp410", | |
| .dvo_reg = DVOC, | |
| .slave_addr = TFP410_ADDR, | |
| .dev_ops = &tfp410_ops, | |
| }, | |
| { | |
| .type = INTEL_DVO_CHIP_LVDS, | |
| .name = "ch7017", | |
| .dvo_reg = DVOC, | |
| .slave_addr = 0x75, | |
| .gpio = GPIOE, | |
| .dev_ops = &ch7017_ops, | |
| } | |
| }; | |
| static void intel_dvo_dpms(struct drm_encoder *encoder, int mode) | |
| { | |
| struct drm_i915_private *dev_priv = encoder->dev->dev_private; | |
| struct intel_output *intel_output = enc_to_intel_output(encoder); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| u32 dvo_reg = dvo->dvo_reg; | |
| u32 temp = I915_READ(dvo_reg); | |
| if (mode == DRM_MODE_DPMS_ON) { | |
| I915_WRITE(dvo_reg, temp | DVO_ENABLE); | |
| I915_READ(dvo_reg); | |
| dvo->dev_ops->dpms(dvo, mode); | |
| } else { | |
| dvo->dev_ops->dpms(dvo, mode); | |
| I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); | |
| I915_READ(dvo_reg); | |
| } | |
| } | |
| static void intel_dvo_save(struct drm_connector *connector) | |
| { | |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| /* Each output should probably just save the registers it touches, | |
| * but for now, use more overkill. | |
| */ | |
| dev_priv->saveDVOA = I915_READ(DVOA); | |
| dev_priv->saveDVOB = I915_READ(DVOB); | |
| dev_priv->saveDVOC = I915_READ(DVOC); | |
| dvo->dev_ops->save(dvo); | |
| } | |
| static void intel_dvo_restore(struct drm_connector *connector) | |
| { | |
| struct drm_i915_private *dev_priv = connector->dev->dev_private; | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| dvo->dev_ops->restore(dvo); | |
| I915_WRITE(DVOA, dev_priv->saveDVOA); | |
| I915_WRITE(DVOB, dev_priv->saveDVOB); | |
| I915_WRITE(DVOC, dev_priv->saveDVOC); | |
| } | |
| static int intel_dvo_mode_valid(struct drm_connector *connector, | |
| struct drm_display_mode *mode) | |
| { | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) | |
| return MODE_NO_DBLESCAN; | |
| /* XXX: Validate clock range */ | |
| if (dvo->panel_fixed_mode) { | |
| if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay) | |
| return MODE_PANEL; | |
| if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay) | |
| return MODE_PANEL; | |
| } | |
| return dvo->dev_ops->mode_valid(dvo, mode); | |
| } | |
| static bool intel_dvo_mode_fixup(struct drm_encoder *encoder, | |
| struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode) | |
| { | |
| struct intel_output *intel_output = enc_to_intel_output(encoder); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| /* If we have timings from the BIOS for the panel, put them in | |
| * to the adjusted mode. The CRTC will be set up for this mode, | |
| * with the panel scaling set up to source from the H/VDisplay | |
| * of the original mode. | |
| */ | |
| if (dvo->panel_fixed_mode != NULL) { | |
| #define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x | |
| C(hdisplay); | |
| C(hsync_start); | |
| C(hsync_end); | |
| C(htotal); | |
| C(vdisplay); | |
| C(vsync_start); | |
| C(vsync_end); | |
| C(vtotal); | |
| C(clock); | |
| drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); | |
| #undef C | |
| } | |
| if (dvo->dev_ops->mode_fixup) | |
| return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode); | |
| return true; | |
| } | |
| static void intel_dvo_mode_set(struct drm_encoder *encoder, | |
| struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode) | |
| { | |
| struct drm_device *dev = encoder->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); | |
| struct intel_output *intel_output = enc_to_intel_output(encoder); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| int pipe = intel_crtc->pipe; | |
| u32 dvo_val; | |
| u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg; | |
| int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; | |
| switch (dvo_reg) { | |
| case DVOA: | |
| default: | |
| dvo_srcdim_reg = DVOA_SRCDIM; | |
| break; | |
| case DVOB: | |
| dvo_srcdim_reg = DVOB_SRCDIM; | |
| break; | |
| case DVOC: | |
| dvo_srcdim_reg = DVOC_SRCDIM; | |
| break; | |
| } | |
| dvo->dev_ops->mode_set(dvo, mode, adjusted_mode); | |
| /* Save the data order, since I don't know what it should be set to. */ | |
| dvo_val = I915_READ(dvo_reg) & | |
| (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG); | |
| dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE | | |
| DVO_BLANK_ACTIVE_HIGH; | |
| if (pipe == 1) | |
| dvo_val |= DVO_PIPE_B_SELECT; | |
| dvo_val |= DVO_PIPE_STALL; | |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) | |
| dvo_val |= DVO_HSYNC_ACTIVE_HIGH; | |
| if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) | |
| dvo_val |= DVO_VSYNC_ACTIVE_HIGH; | |
| I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED); | |
| /*I915_WRITE(DVOB_SRCDIM, | |
| (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | | |
| (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/ | |
| I915_WRITE(dvo_srcdim_reg, | |
| (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | | |
| (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT)); | |
| /*I915_WRITE(DVOB, dvo_val);*/ | |
| I915_WRITE(dvo_reg, dvo_val); | |
| } | |
| /** | |
| * Detect the output connection on our DVO device. | |
| * | |
| * Unimplemented. | |
| */ | |
| static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector) | |
| { | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| return dvo->dev_ops->detect(dvo); | |
| } | |
| static int intel_dvo_get_modes(struct drm_connector *connector) | |
| { | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| /* We should probably have an i2c driver get_modes function for those | |
| * devices which will have a fixed set of modes determined by the chip | |
| * (TV-out, for example), but for now with just TMDS and LVDS, | |
| * that's not the case. | |
| */ | |
| intel_ddc_get_modes(intel_output); | |
| if (!list_empty(&connector->probed_modes)) | |
| return 1; | |
| if (dvo->panel_fixed_mode != NULL) { | |
| struct drm_display_mode *mode; | |
| mode = drm_mode_duplicate(connector->dev, dvo->panel_fixed_mode); | |
| if (mode) { | |
| drm_mode_probed_add(connector, mode); | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void intel_dvo_destroy (struct drm_connector *connector) | |
| { | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| if (dvo) { | |
| if (dvo->dev_ops->destroy) | |
| dvo->dev_ops->destroy(dvo); | |
| if (dvo->panel_fixed_mode) | |
| kfree(dvo->panel_fixed_mode); | |
| /* no need, in i830_dvoices[] now */ | |
| //kfree(dvo); | |
| } | |
| if (intel_output->i2c_bus) | |
| intel_i2c_destroy(intel_output->i2c_bus); | |
| if (intel_output->ddc_bus) | |
| intel_i2c_destroy(intel_output->ddc_bus); | |
| drm_sysfs_connector_remove(connector); | |
| drm_connector_cleanup(connector); | |
| kfree(intel_output); | |
| } | |
| #ifdef RANDR_GET_CRTC_INTERFACE | |
| static struct drm_crtc *intel_dvo_get_crtc(struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT); | |
| return intel_pipe_to_crtc(pScrn, pipe); | |
| } | |
| #endif | |
| static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = { | |
| .dpms = intel_dvo_dpms, | |
| .mode_fixup = intel_dvo_mode_fixup, | |
| .prepare = intel_encoder_prepare, | |
| .mode_set = intel_dvo_mode_set, | |
| .commit = intel_encoder_commit, | |
| }; | |
| static const struct drm_connector_funcs intel_dvo_connector_funcs = { | |
| .dpms = drm_helper_connector_dpms, | |
| .save = intel_dvo_save, | |
| .restore = intel_dvo_restore, | |
| .detect = intel_dvo_detect, | |
| .destroy = intel_dvo_destroy, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| }; | |
| static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = { | |
| .mode_valid = intel_dvo_mode_valid, | |
| .get_modes = intel_dvo_get_modes, | |
| .best_encoder = intel_best_encoder, | |
| }; | |
| static void intel_dvo_enc_destroy(struct drm_encoder *encoder) | |
| { | |
| drm_encoder_cleanup(encoder); | |
| } | |
| static const struct drm_encoder_funcs intel_dvo_enc_funcs = { | |
| .destroy = intel_dvo_enc_destroy, | |
| }; | |
| /** | |
| * Attempts to get a fixed panel timing for LVDS (currently only the i830). | |
| * | |
| * Other chips with DVO LVDS will need to extend this to deal with the LVDS | |
| * chip being on DVOB/C and having multiple pipes. | |
| */ | |
| static struct drm_display_mode * | |
| intel_dvo_get_current_mode (struct drm_connector *connector) | |
| { | |
| struct drm_device *dev = connector->dev; | |
| struct drm_i915_private *dev_priv = dev->dev_private; | |
| struct intel_output *intel_output = to_intel_output(connector); | |
| struct intel_dvo_device *dvo = intel_output->dev_priv; | |
| uint32_t dvo_reg = dvo->dvo_reg; | |
| uint32_t dvo_val = I915_READ(dvo_reg); | |
| struct drm_display_mode *mode = NULL; | |
| /* If the DVO port is active, that'll be the LVDS, so we can pull out | |
| * its timings to get how the BIOS set up the panel. | |
| */ | |
| if (dvo_val & DVO_ENABLE) { | |
| struct drm_crtc *crtc; | |
| int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0; | |
| crtc = intel_get_crtc_from_pipe(dev, pipe); | |
| if (crtc) { | |
| mode = intel_crtc_mode_get(dev, crtc); | |
| if (mode) { | |
| mode->type |= DRM_MODE_TYPE_PREFERRED; | |
| if (dvo_val & DVO_HSYNC_ACTIVE_HIGH) | |
| mode->flags |= DRM_MODE_FLAG_PHSYNC; | |
| if (dvo_val & DVO_VSYNC_ACTIVE_HIGH) | |
| mode->flags |= DRM_MODE_FLAG_PVSYNC; | |
| } | |
| } | |
| } | |
| return mode; | |
| } | |
| void intel_dvo_init(struct drm_device *dev) | |
| { | |
| struct intel_output *intel_output; | |
| struct intel_dvo_device *dvo; | |
| struct i2c_adapter *i2cbus = NULL; | |
| int ret = 0; | |
| int i; | |
| int encoder_type = DRM_MODE_ENCODER_NONE; | |
| intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL); | |
| if (!intel_output) | |
| return; | |
| /* Set up the DDC bus */ | |
| intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D"); | |
| if (!intel_output->ddc_bus) | |
| goto free_intel; | |
| /* Now, try to find a controller */ | |
| for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) { | |
| struct drm_connector *connector = &intel_output->base; | |
| int gpio; | |
| dvo = &intel_dvo_devices[i]; | |
| /* Allow the I2C driver info to specify the GPIO to be used in | |
| * special cases, but otherwise default to what's defined | |
| * in the spec. | |
| */ | |
| if (dvo->gpio != 0) | |
| gpio = dvo->gpio; | |
| else if (dvo->type == INTEL_DVO_CHIP_LVDS) | |
| gpio = GPIOB; | |
| else | |
| gpio = GPIOE; | |
| /* Set up the I2C bus necessary for the chip we're probing. | |
| * It appears that everything is on GPIOE except for panels | |
| * on i830 laptops, which are on GPIOB (DVOA). | |
| */ | |
| if (i2cbus != NULL) | |
| intel_i2c_destroy(i2cbus); | |
| if (!(i2cbus = intel_i2c_create(dev, gpio, | |
| gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) { | |
| continue; | |
| } | |
| if (dvo->dev_ops!= NULL) | |
| ret = dvo->dev_ops->init(dvo, i2cbus); | |
| else | |
| ret = false; | |
| if (!ret) | |
| continue; | |
| intel_output->type = INTEL_OUTPUT_DVO; | |
| switch (dvo->type) { | |
| case INTEL_DVO_CHIP_TMDS: | |
| drm_connector_init(dev, connector, | |
| &intel_dvo_connector_funcs, | |
| DRM_MODE_CONNECTOR_DVII); | |
| encoder_type = DRM_MODE_ENCODER_TMDS; | |
| break; | |
| case INTEL_DVO_CHIP_LVDS: | |
| drm_connector_init(dev, connector, | |
| &intel_dvo_connector_funcs, | |
| DRM_MODE_CONNECTOR_LVDS); | |
| encoder_type = DRM_MODE_ENCODER_LVDS; | |
| break; | |
| } | |
| drm_connector_helper_add(connector, | |
| &intel_dvo_connector_helper_funcs); | |
| connector->display_info.subpixel_order = SubPixelHorizontalRGB; | |
| connector->interlace_allowed = false; | |
| connector->doublescan_allowed = false; | |
| intel_output->dev_priv = dvo; | |
| intel_output->i2c_bus = i2cbus; | |
| drm_encoder_init(dev, &intel_output->enc, | |
| &intel_dvo_enc_funcs, encoder_type); | |
| drm_encoder_helper_add(&intel_output->enc, | |
| &intel_dvo_helper_funcs); | |
| drm_mode_connector_attach_encoder(&intel_output->base, | |
| &intel_output->enc); | |
| if (dvo->type == INTEL_DVO_CHIP_LVDS) { | |
| /* For our LVDS chipsets, we should hopefully be able | |
| * to dig the fixed panel mode out of the BIOS data. | |
| * However, it's in a different format from the BIOS | |
| * data on chipsets with integrated LVDS (stored in AIM | |
| * headers, likely), so for now, just get the current | |
| * mode being output through DVO. | |
| */ | |
| dvo->panel_fixed_mode = | |
| intel_dvo_get_current_mode(connector); | |
| dvo->panel_wants_dither = true; | |
| } | |
| drm_sysfs_connector_add(connector); | |
| return; | |
| } | |
| intel_i2c_destroy(intel_output->ddc_bus); | |
| /* Didn't find a chip, so tear down. */ | |
| if (i2cbus != NULL) | |
| intel_i2c_destroy(i2cbus); | |
| free_intel: | |
| kfree(intel_output); | |
| } |