| /* |
| * isl6421.h - driver for lnb supply and control ic ISL6421 |
| * |
| * Copyright (C) 2006 Andrew de Quincey |
| * Copyright (C) 2006 Oliver Endriss |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * To obtain the license, point your browser to |
| * http://www.gnu.org/copyleft/gpl.html |
| * |
| * |
| * the project's page is at https://linuxtv.org |
| */ |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| |
| #include <media/dvb_frontend.h> |
| #include "isl6421.h" |
| |
| struct isl6421 { |
| u8 config; |
| u8 override_or; |
| u8 override_and; |
| struct i2c_adapter *i2c; |
| u8 i2c_addr; |
| bool is_off; |
| }; |
| |
| static int isl6421_set_voltage(struct dvb_frontend *fe, |
| enum fe_sec_voltage voltage) |
| { |
| int ret; |
| u8 buf; |
| bool is_off; |
| struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = isl6421->i2c_addr, |
| .flags = 0, |
| .buf = &isl6421->config, |
| .len = 1, |
| }, { |
| .addr = isl6421->i2c_addr, |
| .flags = I2C_M_RD, |
| .buf = &buf, |
| .len = 1, |
| } |
| |
| }; |
| |
| isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); |
| |
| switch(voltage) { |
| case SEC_VOLTAGE_OFF: |
| is_off = true; |
| break; |
| case SEC_VOLTAGE_13: |
| is_off = false; |
| isl6421->config |= ISL6421_EN1; |
| break; |
| case SEC_VOLTAGE_18: |
| is_off = false; |
| isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* |
| * If LNBf were not powered on, disable dynamic current limit, as, |
| * according with datasheet, highly capacitive load on the output may |
| * cause a difficult start-up. |
| */ |
| if (isl6421->is_off && !is_off) |
| isl6421->config |= ISL6421_DCL; |
| |
| isl6421->config |= isl6421->override_or; |
| isl6421->config &= isl6421->override_and; |
| |
| ret = i2c_transfer(isl6421->i2c, msg, 2); |
| if (ret < 0) |
| return ret; |
| if (ret != 2) |
| return -EIO; |
| |
| /* Store off status now incase future commands fail */ |
| isl6421->is_off = is_off; |
| |
| /* On overflow, the device will try again after 900 ms (typically) */ |
| if (!is_off && (buf & ISL6421_OLF1)) |
| msleep(1000); |
| |
| /* Re-enable dynamic current limit */ |
| if ((isl6421->config & ISL6421_DCL) && |
| !(isl6421->override_or & ISL6421_DCL)) { |
| isl6421->config &= ~ISL6421_DCL; |
| |
| ret = i2c_transfer(isl6421->i2c, msg, 2); |
| if (ret < 0) |
| return ret; |
| if (ret != 2) |
| return -EIO; |
| } |
| |
| /* Check if overload flag is active. If so, disable power */ |
| if (!is_off && (buf & ISL6421_OLF1)) { |
| isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); |
| ret = i2c_transfer(isl6421->i2c, msg, 1); |
| if (ret < 0) |
| return ret; |
| if (ret != 1) |
| return -EIO; |
| isl6421->is_off = true; |
| |
| dev_warn(&isl6421->i2c->dev, |
| "Overload current detected. disabling LNBf power\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) |
| { |
| struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; |
| struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, |
| .buf = &isl6421->config, |
| .len = sizeof(isl6421->config) }; |
| |
| if (arg) |
| isl6421->config |= ISL6421_LLC1; |
| else |
| isl6421->config &= ~ISL6421_LLC1; |
| |
| isl6421->config |= isl6421->override_or; |
| isl6421->config &= isl6421->override_and; |
| |
| return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; |
| } |
| |
| static int isl6421_set_tone(struct dvb_frontend *fe, |
| enum fe_sec_tone_mode tone) |
| { |
| struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; |
| struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, |
| .buf = &isl6421->config, |
| .len = sizeof(isl6421->config) }; |
| |
| switch (tone) { |
| case SEC_TONE_ON: |
| isl6421->config |= ISL6421_ENT1; |
| break; |
| case SEC_TONE_OFF: |
| isl6421->config &= ~ISL6421_ENT1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| isl6421->config |= isl6421->override_or; |
| isl6421->config &= isl6421->override_and; |
| |
| return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; |
| } |
| |
| static void isl6421_release(struct dvb_frontend *fe) |
| { |
| /* power off */ |
| isl6421_set_voltage(fe, SEC_VOLTAGE_OFF); |
| |
| /* free */ |
| kfree(fe->sec_priv); |
| fe->sec_priv = NULL; |
| } |
| |
| struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, |
| u8 override_set, u8 override_clear, bool override_tone) |
| { |
| struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL); |
| if (!isl6421) |
| return NULL; |
| |
| /* default configuration */ |
| isl6421->config = ISL6421_ISEL1; |
| isl6421->i2c = i2c; |
| isl6421->i2c_addr = i2c_addr; |
| fe->sec_priv = isl6421; |
| |
| /* bits which should be forced to '1' */ |
| isl6421->override_or = override_set; |
| |
| /* bits which should be forced to '0' */ |
| isl6421->override_and = ~override_clear; |
| |
| /* detect if it is present or not */ |
| if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) { |
| kfree(isl6421); |
| fe->sec_priv = NULL; |
| return NULL; |
| } |
| |
| isl6421->is_off = true; |
| |
| /* install release callback */ |
| fe->ops.release_sec = isl6421_release; |
| |
| /* override frontend ops */ |
| fe->ops.set_voltage = isl6421_set_voltage; |
| fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage; |
| if (override_tone) |
| fe->ops.set_tone = isl6421_set_tone; |
| |
| return fe; |
| } |
| EXPORT_SYMBOL(isl6421_attach); |
| |
| MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421"); |
| MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss"); |
| MODULE_LICENSE("GPL"); |