| #include <linux/linkage.h> | |
| #include <linux/errno.h> | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/ioport.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/timex.h> | |
| #include <linux/slab.h> | |
| #include <linux/random.h> | |
| #include <linux/kprobes.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/sysdev.h> | |
| #include <linux/bitops.h> | |
| #include <linux/acpi.h> | |
| #include <linux/io.h> | |
| #include <linux/delay.h> | |
| #include <asm/atomic.h> | |
| #include <asm/system.h> | |
| #include <asm/timer.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/desc.h> | |
| #include <asm/apic.h> | |
| #include <asm/setup.h> | |
| #include <asm/i8259.h> | |
| #include <asm/traps.h> | |
| /* | |
| * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: | |
| * (these are usually mapped to vectors 0x30-0x3f) | |
| */ | |
| /* | |
| * The IO-APIC gives us many more interrupt sources. Most of these | |
| * are unused but an SMP system is supposed to have enough memory ... | |
| * sometimes (mostly wrt. hw bugs) we get corrupted vectors all | |
| * across the spectrum, so we really want to be prepared to get all | |
| * of these. Plus, more powerful systems might have more than 64 | |
| * IO-APIC registers. | |
| * | |
| * (these are usually mapped into the 0x30-0xff vector range) | |
| */ | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * Note that on a 486, we don't want to do a SIGFPE on an irq13 | |
| * as the irq is unreliable, and exception 16 works correctly | |
| * (ie as explained in the intel literature). On a 386, you | |
| * can't use exception 16 due to bad IBM design, so we have to | |
| * rely on the less exact irq13. | |
| * | |
| * Careful.. Not only is IRQ13 unreliable, but it is also | |
| * leads to races. IBM designers who came up with it should | |
| * be shot. | |
| */ | |
| static irqreturn_t math_error_irq(int cpl, void *dev_id) | |
| { | |
| outb(0, 0xF0); | |
| if (ignore_fpu_irq || !boot_cpu_data.hard_math) | |
| return IRQ_NONE; | |
| math_error((void __user *)get_irq_regs()->ip); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * New motherboards sometimes make IRQ 13 be a PCI interrupt, | |
| * so allow interrupt sharing. | |
| */ | |
| static struct irqaction fpu_irq = { | |
| .handler = math_error_irq, | |
| .name = "fpu", | |
| }; | |
| #endif | |
| /* | |
| * IRQ2 is cascade interrupt to second interrupt controller | |
| */ | |
| static struct irqaction irq2 = { | |
| .handler = no_action, | |
| .name = "cascade", | |
| }; | |
| DEFINE_PER_CPU(vector_irq_t, vector_irq) = { | |
| [0 ... IRQ0_VECTOR - 1] = -1, | |
| [IRQ0_VECTOR] = 0, | |
| [IRQ1_VECTOR] = 1, | |
| [IRQ2_VECTOR] = 2, | |
| [IRQ3_VECTOR] = 3, | |
| [IRQ4_VECTOR] = 4, | |
| [IRQ5_VECTOR] = 5, | |
| [IRQ6_VECTOR] = 6, | |
| [IRQ7_VECTOR] = 7, | |
| [IRQ8_VECTOR] = 8, | |
| [IRQ9_VECTOR] = 9, | |
| [IRQ10_VECTOR] = 10, | |
| [IRQ11_VECTOR] = 11, | |
| [IRQ12_VECTOR] = 12, | |
| [IRQ13_VECTOR] = 13, | |
| [IRQ14_VECTOR] = 14, | |
| [IRQ15_VECTOR] = 15, | |
| [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 | |
| }; | |
| int vector_used_by_percpu_irq(unsigned int vector) | |
| { | |
| int cpu; | |
| for_each_online_cpu(cpu) { | |
| if (per_cpu(vector_irq, cpu)[vector] != -1) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static void __init init_ISA_irqs(void) | |
| { | |
| int i; | |
| #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) | |
| init_bsp_APIC(); | |
| #endif | |
| init_8259A(0); | |
| /* | |
| * 16 old-style INTA-cycle interrupts: | |
| */ | |
| for (i = 0; i < NR_IRQS_LEGACY; i++) { | |
| struct irq_desc *desc = irq_to_desc(i); | |
| desc->status = IRQ_DISABLED; | |
| desc->action = NULL; | |
| desc->depth = 1; | |
| set_irq_chip_and_handler_name(i, &i8259A_chip, | |
| handle_level_irq, "XT"); | |
| } | |
| } | |
| /* Overridden in paravirt.c */ | |
| void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); | |
| static void __init smp_intr_init(void) | |
| { | |
| #ifdef CONFIG_SMP | |
| #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) | |
| /* | |
| * The reschedule interrupt is a CPU-to-CPU reschedule-helper | |
| * IPI, driven by wakeup. | |
| */ | |
| alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); | |
| /* IPIs for invalidation */ | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); | |
| alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); | |
| /* IPI for generic function call */ | |
| alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); | |
| /* IPI for generic single function call */ | |
| alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, | |
| call_function_single_interrupt); | |
| /* Low priority IPI to cleanup after moving an irq */ | |
| set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); | |
| set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); | |
| /* IPI used for rebooting/stopping */ | |
| alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt); | |
| #endif | |
| #endif /* CONFIG_SMP */ | |
| } | |
| static void __init apic_intr_init(void) | |
| { | |
| smp_intr_init(); | |
| #ifdef CONFIG_X86_THERMAL_VECTOR | |
| alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); | |
| #endif | |
| #ifdef CONFIG_X86_MCE_THRESHOLD | |
| alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); | |
| #endif | |
| #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC) | |
| alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt); | |
| #endif | |
| #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) | |
| /* self generated IPI for local APIC timer */ | |
| alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); | |
| /* generic IPI for platform specific use */ | |
| alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); | |
| /* IPI vectors for APIC spurious and error interrupts */ | |
| alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); | |
| alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); | |
| /* Performance monitoring interrupts: */ | |
| # ifdef CONFIG_PERF_COUNTERS | |
| alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt); | |
| # endif | |
| #endif | |
| } | |
| /** | |
| * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors | |
| * | |
| * Description: | |
| * Perform any necessary interrupt initialisation prior to setting up | |
| * the "ordinary" interrupt call gates. For legacy reasons, the ISA | |
| * interrupts should be initialised here if the machine emulates a PC | |
| * in any way. | |
| **/ | |
| static void __init x86_quirk_pre_intr_init(void) | |
| { | |
| #ifdef CONFIG_X86_32 | |
| if (x86_quirks->arch_pre_intr_init) { | |
| if (x86_quirks->arch_pre_intr_init()) | |
| return; | |
| } | |
| #endif | |
| init_ISA_irqs(); | |
| } | |
| void __init native_init_IRQ(void) | |
| { | |
| int i; | |
| /* Execute any quirks before the call gates are initialised: */ | |
| x86_quirk_pre_intr_init(); | |
| apic_intr_init(); | |
| /* | |
| * Cover the whole vector space, no vector can escape | |
| * us. (some of these will be overridden and become | |
| * 'special' SMP interrupts) | |
| */ | |
| for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { | |
| /* IA32_SYSCALL_VECTOR could be used in trap_init already. */ | |
| if (!test_bit(i, used_vectors)) | |
| set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); | |
| } | |
| if (!acpi_ioapic) | |
| setup_irq(2, &irq2); | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * Call quirks after call gates are initialised (usually add in | |
| * the architecture specific gates): | |
| */ | |
| x86_quirk_intr_init(); | |
| /* | |
| * External FPU? Set up irq13 if so, for | |
| * original braindamaged IBM FERR coupling. | |
| */ | |
| if (boot_cpu_data.hard_math && !cpu_has_fpu) | |
| setup_irq(FPU_IRQ, &fpu_irq); | |
| irq_ctx_init(smp_processor_id()); | |
| #endif | |
| } |