| /* |
| * Broadcom specific AMBA |
| * Broadcom MIPS32 74K core driver |
| * |
| * Copyright 2009, Broadcom Corporation |
| * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> |
| * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> |
| * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include "bcma_private.h" |
| |
| #include <linux/bcma/bcma.h> |
| |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #include <linux/serial_reg.h> |
| #include <linux/time.h> |
| #ifdef CONFIG_BCM47XX |
| #include <linux/bcm47xx_nvram.h> |
| #endif |
| |
| enum bcma_boot_dev { |
| BCMA_BOOT_DEV_UNK = 0, |
| BCMA_BOOT_DEV_ROM, |
| BCMA_BOOT_DEV_PARALLEL, |
| BCMA_BOOT_DEV_SERIAL, |
| BCMA_BOOT_DEV_NAND, |
| }; |
| |
| /* The 47162a0 hangs when reading MIPS DMP registers registers */ |
| static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) |
| { |
| return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 && |
| dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K; |
| } |
| |
| /* The 5357b0 hangs when reading USB20H DMP registers */ |
| static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) |
| { |
| return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || |
| dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) && |
| dev->bus->chipinfo.pkg == 11 && |
| dev->id.id == BCMA_CORE_USB20_HOST; |
| } |
| |
| static inline u32 mips_read32(struct bcma_drv_mips *mcore, |
| u16 offset) |
| { |
| return bcma_read32(mcore->core, offset); |
| } |
| |
| static inline void mips_write32(struct bcma_drv_mips *mcore, |
| u16 offset, |
| u32 value) |
| { |
| bcma_write32(mcore->core, offset, value); |
| } |
| |
| static const u32 ipsflag_irq_mask[] = { |
| 0, |
| BCMA_MIPS_IPSFLAG_IRQ1, |
| BCMA_MIPS_IPSFLAG_IRQ2, |
| BCMA_MIPS_IPSFLAG_IRQ3, |
| BCMA_MIPS_IPSFLAG_IRQ4, |
| }; |
| |
| static const u32 ipsflag_irq_shift[] = { |
| 0, |
| BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, |
| BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, |
| BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, |
| BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, |
| }; |
| |
| static u32 bcma_core_mips_irqflag(struct bcma_device *dev) |
| { |
| u32 flag; |
| |
| if (bcma_core_mips_bcm47162a0_quirk(dev)) |
| return dev->core_index; |
| if (bcma_core_mips_bcm5357b0_quirk(dev)) |
| return dev->core_index; |
| flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); |
| |
| if (flag) |
| return flag & 0x1F; |
| else |
| return 0x3f; |
| } |
| |
| /* Get the MIPS IRQ assignment for a specified device. |
| * If unassigned, 0 is returned. |
| * If disabled, 5 is returned. |
| * If not supported, 6 is returned. |
| */ |
| unsigned int bcma_core_mips_irq(struct bcma_device *dev) |
| { |
| struct bcma_device *mdev = dev->bus->drv_mips.core; |
| u32 irqflag; |
| unsigned int irq; |
| |
| irqflag = bcma_core_mips_irqflag(dev); |
| if (irqflag == 0x3f) |
| return 6; |
| |
| for (irq = 0; irq <= 4; irq++) |
| if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & |
| (1 << irqflag)) |
| return irq; |
| |
| return 5; |
| } |
| |
| static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) |
| { |
| unsigned int oldirq = bcma_core_mips_irq(dev); |
| struct bcma_bus *bus = dev->bus; |
| struct bcma_device *mdev = bus->drv_mips.core; |
| u32 irqflag; |
| |
| irqflag = bcma_core_mips_irqflag(dev); |
| BUG_ON(oldirq == 6); |
| |
| dev->irq = irq + 2; |
| |
| /* clear the old irq */ |
| if (oldirq == 0) |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & |
| ~(1 << irqflag)); |
| else if (oldirq != 5) |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); |
| |
| /* assign the new one */ |
| if (irq == 0) { |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | |
| (1 << irqflag)); |
| } else { |
| u32 irqinitmask = bcma_read32(mdev, |
| BCMA_MIPS_MIPS74K_INTMASK(irq)); |
| if (irqinitmask) { |
| struct bcma_device *core; |
| |
| /* backplane irq line is in use, find out who uses |
| * it and set user to irq 0 |
| */ |
| list_for_each_entry(core, &bus->cores, list) { |
| if ((1 << bcma_core_mips_irqflag(core)) == |
| irqinitmask) { |
| bcma_core_mips_set_irq(core, 0); |
| break; |
| } |
| } |
| } |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), |
| 1 << irqflag); |
| } |
| |
| bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", |
| dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); |
| } |
| |
| static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, |
| u16 coreid, u8 unit) |
| { |
| struct bcma_device *core; |
| |
| core = bcma_find_core_unit(bus, coreid, unit); |
| if (!core) { |
| bcma_warn(bus, |
| "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", |
| coreid, unit); |
| return; |
| } |
| |
| bcma_core_mips_set_irq(core, irq); |
| } |
| |
| static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) |
| { |
| int i; |
| static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; |
| char interrupts[25]; |
| char *ints = interrupts; |
| |
| for (i = 0; i < ARRAY_SIZE(irq_name); i++) |
| ints += sprintf(ints, " %s%c", |
| irq_name[i], i == irq ? '*' : ' '); |
| |
| bcma_debug(dev->bus, "core 0x%04x, irq:%s\n", dev->id.id, interrupts); |
| } |
| |
| static void bcma_core_mips_dump_irq(struct bcma_bus *bus) |
| { |
| struct bcma_device *core; |
| |
| list_for_each_entry(core, &bus->cores, list) { |
| bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); |
| } |
| } |
| |
| u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus = mcore->core->bus; |
| |
| if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) |
| return bcma_pmu_get_cpu_clock(&bus->drv_cc); |
| |
| bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); |
| return 0; |
| } |
| EXPORT_SYMBOL(bcma_cpu_clock); |
| |
| static enum bcma_boot_dev bcma_boot_dev(struct bcma_bus *bus) |
| { |
| struct bcma_drv_cc *cc = &bus->drv_cc; |
| u8 cc_rev = cc->core->id.rev; |
| |
| if (cc_rev == 42) { |
| struct bcma_device *core; |
| |
| core = bcma_find_core(bus, BCMA_CORE_NS_ROM); |
| if (core) { |
| switch (bcma_aread32(core, BCMA_IOST) & |
| BCMA_NS_ROM_IOST_BOOT_DEV_MASK) { |
| case BCMA_NS_ROM_IOST_BOOT_DEV_NOR: |
| return BCMA_BOOT_DEV_SERIAL; |
| case BCMA_NS_ROM_IOST_BOOT_DEV_NAND: |
| return BCMA_BOOT_DEV_NAND; |
| case BCMA_NS_ROM_IOST_BOOT_DEV_ROM: |
| default: |
| return BCMA_BOOT_DEV_ROM; |
| } |
| } |
| } else { |
| if (cc_rev == 38) { |
| if (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT) |
| return BCMA_BOOT_DEV_NAND; |
| else if (cc->status & BIT(5)) |
| return BCMA_BOOT_DEV_ROM; |
| } |
| |
| if ((cc->capabilities & BCMA_CC_CAP_FLASHT) == |
| BCMA_CC_FLASHT_PARA) |
| return BCMA_BOOT_DEV_PARALLEL; |
| else |
| return BCMA_BOOT_DEV_SERIAL; |
| } |
| |
| return BCMA_BOOT_DEV_SERIAL; |
| } |
| |
| static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus = mcore->core->bus; |
| enum bcma_boot_dev boot_dev; |
| |
| /* Determine flash type this SoC boots from */ |
| boot_dev = bcma_boot_dev(bus); |
| switch (boot_dev) { |
| case BCMA_BOOT_DEV_PARALLEL: |
| case BCMA_BOOT_DEV_SERIAL: |
| #ifdef CONFIG_BCM47XX |
| bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH2, |
| BCMA_SOC_FLASH2_SZ); |
| #endif |
| break; |
| case BCMA_BOOT_DEV_NAND: |
| #ifdef CONFIG_BCM47XX |
| bcm47xx_nvram_init_from_mem(BCMA_SOC_FLASH1, |
| BCMA_SOC_FLASH1_SZ); |
| #endif |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus = mcore->core->bus; |
| |
| if (mcore->early_setup_done) |
| return; |
| |
| bcma_chipco_serial_init(&bus->drv_cc); |
| bcma_core_mips_nvram_init(mcore); |
| |
| mcore->early_setup_done = true; |
| } |
| |
| static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) |
| { |
| struct bcma_device *cpu, *pcie, *i2s; |
| |
| /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) |
| * (IRQ flags > 7 are ignored when setting the interrupt masks) |
| */ |
| if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && |
| bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) |
| return; |
| |
| cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); |
| pcie = bcma_find_core(bus, BCMA_CORE_PCIE); |
| i2s = bcma_find_core(bus, BCMA_CORE_I2S); |
| if (cpu && pcie && i2s && |
| bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && |
| bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && |
| bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { |
| bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); |
| bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); |
| bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); |
| bcma_debug(bus, |
| "Moved i2s interrupt to oob line 7 instead of 8\n"); |
| } |
| } |
| |
| void bcma_core_mips_init(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus; |
| struct bcma_device *core; |
| bus = mcore->core->bus; |
| |
| if (mcore->setup_done) |
| return; |
| |
| bcma_debug(bus, "Initializing MIPS core...\n"); |
| |
| bcma_core_mips_early_init(mcore); |
| |
| bcma_fix_i2s_irqflag(bus); |
| |
| switch (bus->chipinfo.id) { |
| case BCMA_CHIP_ID_BCM4716: |
| case BCMA_CHIP_ID_BCM4748: |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); |
| bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); |
| bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); |
| break; |
| case BCMA_CHIP_ID_BCM5356: |
| case BCMA_CHIP_ID_BCM47162: |
| case BCMA_CHIP_ID_BCM53572: |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); |
| break; |
| case BCMA_CHIP_ID_BCM5357: |
| case BCMA_CHIP_ID_BCM4749: |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); |
| bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); |
| break; |
| case BCMA_CHIP_ID_BCM4706: |
| bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); |
| bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, |
| 0); |
| bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); |
| bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); |
| bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, |
| 0); |
| break; |
| default: |
| list_for_each_entry(core, &bus->cores, list) { |
| core->irq = bcma_core_irq(core, 0); |
| } |
| bcma_err(bus, |
| "Unknown device (0x%x) found, can not configure IRQs\n", |
| bus->chipinfo.id); |
| } |
| bcma_debug(bus, "IRQ reconfiguration done\n"); |
| bcma_core_mips_dump_irq(bus); |
| |
| mcore->setup_done = true; |
| } |