| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Filesystem access-by-fd. |
| * |
| * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| */ |
| |
| #include <linux/fs_context.h> |
| #include <linux/fs_parser.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/syscalls.h> |
| #include <linux/security.h> |
| #include <linux/anon_inodes.h> |
| #include <linux/namei.h> |
| #include <linux/file.h> |
| #include <uapi/linux/mount.h> |
| #include "internal.h" |
| #include "mount.h" |
| |
| /* |
| * Allow the user to read back any error, warning or informational messages. |
| */ |
| static ssize_t fscontext_read(struct file *file, |
| char __user *_buf, size_t len, loff_t *pos) |
| { |
| struct fs_context *fc = file->private_data; |
| struct fc_log *log = fc->log; |
| unsigned int logsize = ARRAY_SIZE(log->buffer); |
| ssize_t ret; |
| char *p; |
| bool need_free; |
| int index, n; |
| |
| ret = mutex_lock_interruptible(&fc->uapi_mutex); |
| if (ret < 0) |
| return ret; |
| |
| if (log->head == log->tail) { |
| mutex_unlock(&fc->uapi_mutex); |
| return -ENODATA; |
| } |
| |
| index = log->tail & (logsize - 1); |
| p = log->buffer[index]; |
| need_free = log->need_free & (1 << index); |
| log->buffer[index] = NULL; |
| log->need_free &= ~(1 << index); |
| log->tail++; |
| mutex_unlock(&fc->uapi_mutex); |
| |
| ret = -EMSGSIZE; |
| n = strlen(p); |
| if (n > len) |
| goto err_free; |
| ret = -EFAULT; |
| if (copy_to_user(_buf, p, n) != 0) |
| goto err_free; |
| ret = n; |
| |
| err_free: |
| if (need_free) |
| kfree(p); |
| return ret; |
| } |
| |
| static int fscontext_release(struct inode *inode, struct file *file) |
| { |
| struct fs_context *fc = file->private_data; |
| |
| if (fc) { |
| file->private_data = NULL; |
| put_fs_context(fc); |
| } |
| return 0; |
| } |
| |
| const struct file_operations fscontext_fops = { |
| .read = fscontext_read, |
| .release = fscontext_release, |
| .llseek = no_llseek, |
| }; |
| |
| /* |
| * Attach a filesystem context to a file and an fd. |
| */ |
| static int fscontext_create_fd(struct fs_context *fc, unsigned int o_flags) |
| { |
| int fd; |
| |
| fd = anon_inode_getfd("[fscontext]", &fscontext_fops, fc, |
| O_RDWR | o_flags); |
| if (fd < 0) |
| put_fs_context(fc); |
| return fd; |
| } |
| |
| static int fscontext_alloc_log(struct fs_context *fc) |
| { |
| fc->log = kzalloc(sizeof(*fc->log), GFP_KERNEL); |
| if (!fc->log) |
| return -ENOMEM; |
| refcount_set(&fc->log->usage, 1); |
| fc->log->owner = fc->fs_type->owner; |
| return 0; |
| } |
| |
| /* |
| * Open a filesystem by name so that it can be configured for mounting. |
| * |
| * We are allowed to specify a container in which the filesystem will be |
| * opened, thereby indicating which namespaces will be used (notably, which |
| * network namespace will be used for network filesystems). |
| */ |
| SYSCALL_DEFINE2(fsopen, const char __user *, _fs_name, unsigned int, flags) |
| { |
| struct file_system_type *fs_type; |
| struct fs_context *fc; |
| const char *fs_name; |
| int ret; |
| |
| if (!ns_capable(current->nsproxy->mnt_ns->user_ns, CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if (flags & ~FSOPEN_CLOEXEC) |
| return -EINVAL; |
| |
| fs_name = strndup_user(_fs_name, PAGE_SIZE); |
| if (IS_ERR(fs_name)) |
| return PTR_ERR(fs_name); |
| |
| fs_type = get_fs_type(fs_name); |
| kfree(fs_name); |
| if (!fs_type) |
| return -ENODEV; |
| |
| fc = fs_context_for_mount(fs_type, 0); |
| put_filesystem(fs_type); |
| if (IS_ERR(fc)) |
| return PTR_ERR(fc); |
| |
| fc->phase = FS_CONTEXT_CREATE_PARAMS; |
| |
| ret = fscontext_alloc_log(fc); |
| if (ret < 0) |
| goto err_fc; |
| |
| return fscontext_create_fd(fc, flags & FSOPEN_CLOEXEC ? O_CLOEXEC : 0); |
| |
| err_fc: |
| put_fs_context(fc); |
| return ret; |
| } |
| |
| /* |
| * Pick a superblock into a context for reconfiguration. |
| */ |
| SYSCALL_DEFINE3(fspick, int, dfd, const char __user *, path, unsigned int, flags) |
| { |
| struct fs_context *fc; |
| struct path target; |
| unsigned int lookup_flags; |
| int ret; |
| |
| if (!ns_capable(current->nsproxy->mnt_ns->user_ns, CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if ((flags & ~(FSPICK_CLOEXEC | |
| FSPICK_SYMLINK_NOFOLLOW | |
| FSPICK_NO_AUTOMOUNT | |
| FSPICK_EMPTY_PATH)) != 0) |
| return -EINVAL; |
| |
| lookup_flags = LOOKUP_FOLLOW | LOOKUP_AUTOMOUNT; |
| if (flags & FSPICK_SYMLINK_NOFOLLOW) |
| lookup_flags &= ~LOOKUP_FOLLOW; |
| if (flags & FSPICK_NO_AUTOMOUNT) |
| lookup_flags &= ~LOOKUP_AUTOMOUNT; |
| if (flags & FSPICK_EMPTY_PATH) |
| lookup_flags |= LOOKUP_EMPTY; |
| ret = user_path_at(dfd, path, lookup_flags, &target); |
| if (ret < 0) |
| goto err; |
| |
| ret = -EINVAL; |
| if (target.mnt->mnt_root != target.dentry) |
| goto err_path; |
| |
| fc = fs_context_for_reconfigure(target.dentry, 0, 0); |
| if (IS_ERR(fc)) { |
| ret = PTR_ERR(fc); |
| goto err_path; |
| } |
| |
| fc->phase = FS_CONTEXT_RECONF_PARAMS; |
| |
| ret = fscontext_alloc_log(fc); |
| if (ret < 0) |
| goto err_fc; |
| |
| path_put(&target); |
| return fscontext_create_fd(fc, flags & FSPICK_CLOEXEC ? O_CLOEXEC : 0); |
| |
| err_fc: |
| put_fs_context(fc); |
| err_path: |
| path_put(&target); |
| err: |
| return ret; |
| } |
| |
| /* |
| * Check the state and apply the configuration. Note that this function is |
| * allowed to 'steal' the value by setting param->xxx to NULL before returning. |
| */ |
| static int vfs_fsconfig_locked(struct fs_context *fc, int cmd, |
| struct fs_parameter *param) |
| { |
| struct super_block *sb; |
| int ret; |
| |
| ret = finish_clean_context(fc); |
| if (ret) |
| return ret; |
| switch (cmd) { |
| case FSCONFIG_CMD_CREATE: |
| if (fc->phase != FS_CONTEXT_CREATE_PARAMS) |
| return -EBUSY; |
| fc->phase = FS_CONTEXT_CREATING; |
| ret = vfs_get_tree(fc); |
| if (ret) |
| break; |
| sb = fc->root->d_sb; |
| ret = security_sb_kern_mount(sb); |
| if (unlikely(ret)) { |
| fc_drop_locked(fc); |
| break; |
| } |
| up_write(&sb->s_umount); |
| fc->phase = FS_CONTEXT_AWAITING_MOUNT; |
| return 0; |
| case FSCONFIG_CMD_RECONFIGURE: |
| if (fc->phase != FS_CONTEXT_RECONF_PARAMS) |
| return -EBUSY; |
| fc->phase = FS_CONTEXT_RECONFIGURING; |
| sb = fc->root->d_sb; |
| if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN)) { |
| ret = -EPERM; |
| break; |
| } |
| down_write(&sb->s_umount); |
| ret = reconfigure_super(fc); |
| up_write(&sb->s_umount); |
| if (ret) |
| break; |
| vfs_clean_context(fc); |
| return 0; |
| default: |
| if (fc->phase != FS_CONTEXT_CREATE_PARAMS && |
| fc->phase != FS_CONTEXT_RECONF_PARAMS) |
| return -EBUSY; |
| |
| return vfs_parse_fs_param(fc, param); |
| } |
| fc->phase = FS_CONTEXT_FAILED; |
| return ret; |
| } |
| |
| /** |
| * sys_fsconfig - Set parameters and trigger actions on a context |
| * @fd: The filesystem context to act upon |
| * @cmd: The action to take |
| * @_key: Where appropriate, the parameter key to set |
| * @_value: Where appropriate, the parameter value to set |
| * @aux: Additional information for the value |
| * |
| * This system call is used to set parameters on a context, including |
| * superblock settings, data source and security labelling. |
| * |
| * Actions include triggering the creation of a superblock and the |
| * reconfiguration of the superblock attached to the specified context. |
| * |
| * When setting a parameter, @cmd indicates the type of value being proposed |
| * and @_key indicates the parameter to be altered. |
| * |
| * @_value and @aux are used to specify the value, should a value be required: |
| * |
| * (*) fsconfig_set_flag: No value is specified. The parameter must be boolean |
| * in nature. The key may be prefixed with "no" to invert the |
| * setting. @_value must be NULL and @aux must be 0. |
| * |
| * (*) fsconfig_set_string: A string value is specified. The parameter can be |
| * expecting boolean, integer, string or take a path. A conversion to an |
| * appropriate type will be attempted (which may include looking up as a |
| * path). @_value points to a NUL-terminated string and @aux must be 0. |
| * |
| * (*) fsconfig_set_binary: A binary blob is specified. @_value points to the |
| * blob and @aux indicates its size. The parameter must be expecting a |
| * blob. |
| * |
| * (*) fsconfig_set_path: A non-empty path is specified. The parameter must be |
| * expecting a path object. @_value points to a NUL-terminated string that |
| * is the path and @aux is a file descriptor at which to start a relative |
| * lookup or AT_FDCWD. |
| * |
| * (*) fsconfig_set_path_empty: As fsconfig_set_path, but with AT_EMPTY_PATH |
| * implied. |
| * |
| * (*) fsconfig_set_fd: An open file descriptor is specified. @_value must be |
| * NULL and @aux indicates the file descriptor. |
| */ |
| SYSCALL_DEFINE5(fsconfig, |
| int, fd, |
| unsigned int, cmd, |
| const char __user *, _key, |
| const void __user *, _value, |
| int, aux) |
| { |
| struct fs_context *fc; |
| struct fd f; |
| int ret; |
| |
| struct fs_parameter param = { |
| .type = fs_value_is_undefined, |
| }; |
| |
| if (fd < 0) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case FSCONFIG_SET_FLAG: |
| if (!_key || _value || aux) |
| return -EINVAL; |
| break; |
| case FSCONFIG_SET_STRING: |
| if (!_key || !_value || aux) |
| return -EINVAL; |
| break; |
| case FSCONFIG_SET_BINARY: |
| if (!_key || !_value || aux <= 0 || aux > 1024 * 1024) |
| return -EINVAL; |
| break; |
| case FSCONFIG_SET_PATH: |
| case FSCONFIG_SET_PATH_EMPTY: |
| if (!_key || !_value || (aux != AT_FDCWD && aux < 0)) |
| return -EINVAL; |
| break; |
| case FSCONFIG_SET_FD: |
| if (!_key || _value || aux < 0) |
| return -EINVAL; |
| break; |
| case FSCONFIG_CMD_CREATE: |
| case FSCONFIG_CMD_RECONFIGURE: |
| if (_key || _value || aux) |
| return -EINVAL; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| f = fdget(fd); |
| if (!f.file) |
| return -EBADF; |
| ret = -EINVAL; |
| if (f.file->f_op != &fscontext_fops) |
| goto out_f; |
| |
| fc = f.file->private_data; |
| if (fc->ops == &legacy_fs_context_ops) { |
| switch (cmd) { |
| case FSCONFIG_SET_BINARY: |
| case FSCONFIG_SET_PATH: |
| case FSCONFIG_SET_PATH_EMPTY: |
| case FSCONFIG_SET_FD: |
| ret = -EOPNOTSUPP; |
| goto out_f; |
| } |
| } |
| |
| if (_key) { |
| param.key = strndup_user(_key, 256); |
| if (IS_ERR(param.key)) { |
| ret = PTR_ERR(param.key); |
| goto out_f; |
| } |
| } |
| |
| switch (cmd) { |
| case FSCONFIG_SET_FLAG: |
| param.type = fs_value_is_flag; |
| break; |
| case FSCONFIG_SET_STRING: |
| param.type = fs_value_is_string; |
| param.string = strndup_user(_value, 256); |
| if (IS_ERR(param.string)) { |
| ret = PTR_ERR(param.string); |
| goto out_key; |
| } |
| param.size = strlen(param.string); |
| break; |
| case FSCONFIG_SET_BINARY: |
| param.type = fs_value_is_blob; |
| param.size = aux; |
| param.blob = memdup_user_nul(_value, aux); |
| if (IS_ERR(param.blob)) { |
| ret = PTR_ERR(param.blob); |
| goto out_key; |
| } |
| break; |
| case FSCONFIG_SET_PATH: |
| param.type = fs_value_is_filename; |
| param.name = getname_flags(_value, 0, NULL); |
| if (IS_ERR(param.name)) { |
| ret = PTR_ERR(param.name); |
| goto out_key; |
| } |
| param.dirfd = aux; |
| param.size = strlen(param.name->name); |
| break; |
| case FSCONFIG_SET_PATH_EMPTY: |
| param.type = fs_value_is_filename_empty; |
| param.name = getname_flags(_value, LOOKUP_EMPTY, NULL); |
| if (IS_ERR(param.name)) { |
| ret = PTR_ERR(param.name); |
| goto out_key; |
| } |
| param.dirfd = aux; |
| param.size = strlen(param.name->name); |
| break; |
| case FSCONFIG_SET_FD: |
| param.type = fs_value_is_file; |
| ret = -EBADF; |
| param.file = fget(aux); |
| if (!param.file) |
| goto out_key; |
| break; |
| default: |
| break; |
| } |
| |
| ret = mutex_lock_interruptible(&fc->uapi_mutex); |
| if (ret == 0) { |
| ret = vfs_fsconfig_locked(fc, cmd, ¶m); |
| mutex_unlock(&fc->uapi_mutex); |
| } |
| |
| /* Clean up the our record of any value that we obtained from |
| * userspace. Note that the value may have been stolen by the LSM or |
| * filesystem, in which case the value pointer will have been cleared. |
| */ |
| switch (cmd) { |
| case FSCONFIG_SET_STRING: |
| case FSCONFIG_SET_BINARY: |
| kfree(param.string); |
| break; |
| case FSCONFIG_SET_PATH: |
| case FSCONFIG_SET_PATH_EMPTY: |
| if (param.name) |
| putname(param.name); |
| break; |
| case FSCONFIG_SET_FD: |
| if (param.file) |
| fput(param.file); |
| break; |
| default: |
| break; |
| } |
| out_key: |
| kfree(param.key); |
| out_f: |
| fdput(f); |
| return ret; |
| } |