| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Aeroflex Gaisler SVGACTRL framebuffer device. |
| * |
| * 2011 (c) Aeroflex Gaisler AB |
| * |
| * Full documentation of the core can be found here: |
| * http://www.gaisler.com/products/grlib/grip.pdf |
| * |
| * Contributors: Kristoffer Glembo <kristoffer@gaisler.com> |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_device.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/mm.h> |
| #include <linux/fb.h> |
| #include <linux/io.h> |
| |
| struct grvga_regs { |
| u32 status; /* 0x00 */ |
| u32 video_length; /* 0x04 */ |
| u32 front_porch; /* 0x08 */ |
| u32 sync_length; /* 0x0C */ |
| u32 line_length; /* 0x10 */ |
| u32 fb_pos; /* 0x14 */ |
| u32 clk_vector[4]; /* 0x18 */ |
| u32 clut; /* 0x20 */ |
| }; |
| |
| struct grvga_par { |
| struct grvga_regs *regs; |
| u32 color_palette[16]; /* 16 entry pseudo palette used by fbcon in true color mode */ |
| int clk_sel; |
| int fb_alloced; /* = 1 if framebuffer is allocated in main memory */ |
| }; |
| |
| |
| static const struct fb_videomode grvga_modedb[] = { |
| { |
| /* 640x480 @ 60 Hz */ |
| NULL, 60, 640, 480, 40000, 48, 16, 39, 11, 96, 2, |
| 0, FB_VMODE_NONINTERLACED |
| }, { |
| /* 800x600 @ 60 Hz */ |
| NULL, 60, 800, 600, 25000, 88, 40, 23, 1, 128, 4, |
| 0, FB_VMODE_NONINTERLACED |
| }, { |
| /* 800x600 @ 72 Hz */ |
| NULL, 72, 800, 600, 20000, 64, 56, 23, 37, 120, 6, |
| 0, FB_VMODE_NONINTERLACED |
| }, { |
| /* 1024x768 @ 60 Hz */ |
| NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, |
| 0, FB_VMODE_NONINTERLACED |
| } |
| }; |
| |
| static const struct fb_fix_screeninfo grvga_fix = { |
| .id = "AG SVGACTRL", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .xpanstep = 0, |
| .ypanstep = 1, |
| .ywrapstep = 0, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| static int grvga_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct grvga_par *par = info->par; |
| int i; |
| |
| if (!var->xres) |
| var->xres = 1; |
| if (!var->yres) |
| var->yres = 1; |
| if (var->bits_per_pixel <= 8) |
| var->bits_per_pixel = 8; |
| else if (var->bits_per_pixel <= 16) |
| var->bits_per_pixel = 16; |
| else if (var->bits_per_pixel <= 24) |
| var->bits_per_pixel = 24; |
| else if (var->bits_per_pixel <= 32) |
| var->bits_per_pixel = 32; |
| else |
| return -EINVAL; |
| |
| var->xres_virtual = var->xres; |
| var->yres_virtual = 2*var->yres; |
| |
| if (info->fix.smem_len) { |
| if ((var->yres_virtual*var->xres_virtual*var->bits_per_pixel/8) > info->fix.smem_len) |
| return -ENOMEM; |
| } |
| |
| /* Which clocks that are available can be read out in these registers */ |
| for (i = 0; i <= 3 ; i++) { |
| if (var->pixclock == par->regs->clk_vector[i]) |
| break; |
| } |
| if (i <= 3) |
| par->clk_sel = i; |
| else |
| return -EINVAL; |
| |
| switch (info->var.bits_per_pixel) { |
| case 8: |
| var->red = (struct fb_bitfield) {0, 8, 0}; /* offset, length, msb-right */ |
| var->green = (struct fb_bitfield) {0, 8, 0}; |
| var->blue = (struct fb_bitfield) {0, 8, 0}; |
| var->transp = (struct fb_bitfield) {0, 0, 0}; |
| break; |
| case 16: |
| var->red = (struct fb_bitfield) {11, 5, 0}; |
| var->green = (struct fb_bitfield) {5, 6, 0}; |
| var->blue = (struct fb_bitfield) {0, 5, 0}; |
| var->transp = (struct fb_bitfield) {0, 0, 0}; |
| break; |
| case 24: |
| case 32: |
| var->red = (struct fb_bitfield) {16, 8, 0}; |
| var->green = (struct fb_bitfield) {8, 8, 0}; |
| var->blue = (struct fb_bitfield) {0, 8, 0}; |
| var->transp = (struct fb_bitfield) {24, 8, 0}; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int grvga_set_par(struct fb_info *info) |
| { |
| |
| u32 func = 0; |
| struct grvga_par *par = info->par; |
| |
| __raw_writel(((info->var.yres - 1) << 16) | (info->var.xres - 1), |
| &par->regs->video_length); |
| |
| __raw_writel((info->var.lower_margin << 16) | (info->var.right_margin), |
| &par->regs->front_porch); |
| |
| __raw_writel((info->var.vsync_len << 16) | (info->var.hsync_len), |
| &par->regs->sync_length); |
| |
| __raw_writel(((info->var.yres + info->var.lower_margin + info->var.upper_margin + info->var.vsync_len - 1) << 16) | |
| (info->var.xres + info->var.right_margin + info->var.left_margin + info->var.hsync_len - 1), |
| &par->regs->line_length); |
| |
| switch (info->var.bits_per_pixel) { |
| case 8: |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| func = 1; |
| break; |
| case 16: |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| func = 2; |
| break; |
| case 24: |
| case 32: |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| func = 3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| __raw_writel((par->clk_sel << 6) | (func << 4) | 1, |
| &par->regs->status); |
| |
| info->fix.line_length = (info->var.xres_virtual*info->var.bits_per_pixel)/8; |
| return 0; |
| } |
| |
| static int grvga_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) |
| { |
| struct grvga_par *par; |
| par = info->par; |
| |
| if (regno >= 256) /* Size of CLUT */ |
| return -EINVAL; |
| |
| if (info->var.grayscale) { |
| /* grayscale = 0.30*R + 0.59*G + 0.11*B */ |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; |
| } |
| |
| |
| |
| #define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16) |
| |
| red = CNVT_TOHW(red, info->var.red.length); |
| green = CNVT_TOHW(green, info->var.green.length); |
| blue = CNVT_TOHW(blue, info->var.blue.length); |
| transp = CNVT_TOHW(transp, info->var.transp.length); |
| |
| #undef CNVT_TOHW |
| |
| /* In PSEUDOCOLOR we use the hardware CLUT */ |
| if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) |
| __raw_writel((regno << 24) | (red << 16) | (green << 8) | blue, |
| &par->regs->clut); |
| |
| /* Truecolor uses the pseudo palette */ |
| else if (info->fix.visual == FB_VISUAL_TRUECOLOR) { |
| u32 v; |
| if (regno >= 16) |
| return -EINVAL; |
| |
| |
| v = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset) | |
| (transp << info->var.transp.offset); |
| |
| ((u32 *) (info->pseudo_palette))[regno] = v; |
| } |
| return 0; |
| } |
| |
| static int grvga_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct grvga_par *par = info->par; |
| struct fb_fix_screeninfo *fix = &info->fix; |
| u32 base_addr; |
| |
| if (var->xoffset != 0) |
| return -EINVAL; |
| |
| base_addr = fix->smem_start + (var->yoffset * fix->line_length); |
| base_addr &= ~3UL; |
| |
| /* Set framebuffer base address */ |
| __raw_writel(base_addr, |
| &par->regs->fb_pos); |
| |
| return 0; |
| } |
| |
| static struct fb_ops grvga_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = grvga_check_var, |
| .fb_set_par = grvga_set_par, |
| .fb_setcolreg = grvga_setcolreg, |
| .fb_pan_display = grvga_pan_display, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit |
| }; |
| |
| static int grvga_parse_custom(char *options, |
| struct fb_var_screeninfo *screendata) |
| { |
| char *this_opt; |
| int count = 0; |
| if (!options || !*options) |
| return -1; |
| |
| while ((this_opt = strsep(&options, " ")) != NULL) { |
| if (!*this_opt) |
| continue; |
| |
| switch (count) { |
| case 0: |
| screendata->pixclock = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 1: |
| screendata->xres = screendata->xres_virtual = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 2: |
| screendata->right_margin = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 3: |
| screendata->hsync_len = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 4: |
| screendata->left_margin = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 5: |
| screendata->yres = screendata->yres_virtual = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 6: |
| screendata->lower_margin = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 7: |
| screendata->vsync_len = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 8: |
| screendata->upper_margin = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| case 9: |
| screendata->bits_per_pixel = simple_strtoul(this_opt, NULL, 0); |
| count++; |
| break; |
| default: |
| return -1; |
| } |
| } |
| screendata->activate = FB_ACTIVATE_NOW; |
| screendata->vmode = FB_VMODE_NONINTERLACED; |
| return 0; |
| } |
| |
| static int grvga_probe(struct platform_device *dev) |
| { |
| struct fb_info *info; |
| int retval = -ENOMEM; |
| unsigned long virtual_start; |
| unsigned long grvga_fix_addr = 0; |
| unsigned long physical_start = 0; |
| unsigned long grvga_mem_size = 0; |
| struct grvga_par *par = NULL; |
| char *options = NULL, *mode_opt = NULL; |
| |
| info = framebuffer_alloc(sizeof(struct grvga_par), &dev->dev); |
| if (!info) { |
| dev_err(&dev->dev, "framebuffer_alloc failed\n"); |
| return -ENOMEM; |
| } |
| |
| /* Expecting: "grvga: modestring, [addr:<framebuffer physical address>], [size:<framebuffer size>] |
| * |
| * If modestring is custom:<custom mode string> we parse the string which then contains all videoparameters |
| * If address is left out, we allocate memory, |
| * if size is left out we only allocate enough to support the given mode. |
| */ |
| if (fb_get_options("grvga", &options)) { |
| retval = -ENODEV; |
| goto free_fb; |
| } |
| |
| if (!options || !*options) |
| options = "640x480-8@60"; |
| |
| while (1) { |
| char *this_opt = strsep(&options, ","); |
| |
| if (!this_opt) |
| break; |
| |
| if (!strncmp(this_opt, "custom", 6)) { |
| if (grvga_parse_custom(this_opt, &info->var) < 0) { |
| dev_err(&dev->dev, "Failed to parse custom mode (%s).\n", this_opt); |
| retval = -EINVAL; |
| goto free_fb; |
| } |
| } else if (!strncmp(this_opt, "addr", 4)) |
| grvga_fix_addr = simple_strtoul(this_opt + 5, NULL, 16); |
| else if (!strncmp(this_opt, "size", 4)) |
| grvga_mem_size = simple_strtoul(this_opt + 5, NULL, 0); |
| else |
| mode_opt = this_opt; |
| } |
| |
| par = info->par; |
| info->fbops = &grvga_ops; |
| info->fix = grvga_fix; |
| info->pseudo_palette = par->color_palette; |
| info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN; |
| info->fix.smem_len = grvga_mem_size; |
| |
| if (!devm_request_mem_region(&dev->dev, dev->resource[0].start, |
| resource_size(&dev->resource[0]), "grlib-svgactrl regs")) { |
| dev_err(&dev->dev, "registers already mapped\n"); |
| retval = -EBUSY; |
| goto free_fb; |
| } |
| |
| par->regs = of_ioremap(&dev->resource[0], 0, |
| resource_size(&dev->resource[0]), |
| "grlib-svgactrl regs"); |
| |
| if (!par->regs) { |
| dev_err(&dev->dev, "failed to map registers\n"); |
| retval = -ENOMEM; |
| goto free_fb; |
| } |
| |
| retval = fb_alloc_cmap(&info->cmap, 256, 0); |
| if (retval < 0) { |
| dev_err(&dev->dev, "failed to allocate mem with fb_alloc_cmap\n"); |
| retval = -ENOMEM; |
| goto unmap_regs; |
| } |
| |
| if (mode_opt) { |
| retval = fb_find_mode(&info->var, info, mode_opt, |
| grvga_modedb, sizeof(grvga_modedb), &grvga_modedb[0], 8); |
| if (!retval || retval == 4) { |
| retval = -EINVAL; |
| goto dealloc_cmap; |
| } |
| } |
| |
| if (!grvga_mem_size) |
| grvga_mem_size = info->var.xres_virtual * info->var.yres_virtual * info->var.bits_per_pixel/8; |
| |
| if (grvga_fix_addr) { |
| /* Got framebuffer base address from argument list */ |
| |
| physical_start = grvga_fix_addr; |
| |
| if (!devm_request_mem_region(&dev->dev, physical_start, |
| grvga_mem_size, dev->name)) { |
| dev_err(&dev->dev, "failed to request memory region\n"); |
| retval = -ENOMEM; |
| goto dealloc_cmap; |
| } |
| |
| virtual_start = (unsigned long) ioremap(physical_start, grvga_mem_size); |
| |
| if (!virtual_start) { |
| dev_err(&dev->dev, "error mapping framebuffer memory\n"); |
| retval = -ENOMEM; |
| goto dealloc_cmap; |
| } |
| } else { /* Allocate frambuffer memory */ |
| |
| unsigned long page; |
| |
| virtual_start = (unsigned long) __get_free_pages(GFP_DMA, |
| get_order(grvga_mem_size)); |
| if (!virtual_start) { |
| dev_err(&dev->dev, |
| "unable to allocate framebuffer memory (%lu bytes)\n", |
| grvga_mem_size); |
| retval = -ENOMEM; |
| goto dealloc_cmap; |
| } |
| |
| physical_start = dma_map_single(&dev->dev, (void *)virtual_start, grvga_mem_size, DMA_TO_DEVICE); |
| |
| /* Set page reserved so that mmap will work. This is necessary |
| * since we'll be remapping normal memory. |
| */ |
| for (page = virtual_start; |
| page < PAGE_ALIGN(virtual_start + grvga_mem_size); |
| page += PAGE_SIZE) { |
| SetPageReserved(virt_to_page(page)); |
| } |
| |
| par->fb_alloced = 1; |
| } |
| |
| memset((unsigned long *) virtual_start, 0, grvga_mem_size); |
| |
| info->screen_base = (char __iomem *) virtual_start; |
| info->fix.smem_start = physical_start; |
| info->fix.smem_len = grvga_mem_size; |
| |
| dev_set_drvdata(&dev->dev, info); |
| |
| dev_info(&dev->dev, |
| "Aeroflex Gaisler framebuffer device (fb%d), %dx%d-%d, using %luK of video memory @ %p\n", |
| info->node, info->var.xres, info->var.yres, info->var.bits_per_pixel, |
| grvga_mem_size >> 10, info->screen_base); |
| |
| retval = register_framebuffer(info); |
| if (retval < 0) { |
| dev_err(&dev->dev, "failed to register framebuffer\n"); |
| goto free_mem; |
| } |
| |
| __raw_writel(physical_start, &par->regs->fb_pos); |
| __raw_writel(__raw_readl(&par->regs->status) | 1, /* Enable framebuffer */ |
| &par->regs->status); |
| |
| return 0; |
| |
| free_mem: |
| if (grvga_fix_addr) |
| iounmap((void *)virtual_start); |
| else |
| kfree((void *)virtual_start); |
| dealloc_cmap: |
| fb_dealloc_cmap(&info->cmap); |
| unmap_regs: |
| of_iounmap(&dev->resource[0], par->regs, |
| resource_size(&dev->resource[0])); |
| free_fb: |
| framebuffer_release(info); |
| |
| return retval; |
| } |
| |
| static int grvga_remove(struct platform_device *device) |
| { |
| struct fb_info *info = dev_get_drvdata(&device->dev); |
| struct grvga_par *par; |
| |
| if (info) { |
| par = info->par; |
| unregister_framebuffer(info); |
| fb_dealloc_cmap(&info->cmap); |
| |
| of_iounmap(&device->resource[0], par->regs, |
| resource_size(&device->resource[0])); |
| |
| if (!par->fb_alloced) |
| iounmap(info->screen_base); |
| else |
| kfree((void *)info->screen_base); |
| |
| framebuffer_release(info); |
| } |
| |
| return 0; |
| } |
| |
| static struct of_device_id svgactrl_of_match[] = { |
| { |
| .name = "GAISLER_SVGACTRL", |
| }, |
| { |
| .name = "01_063", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, svgactrl_of_match); |
| |
| static struct platform_driver grvga_driver = { |
| .driver = { |
| .name = "grlib-svgactrl", |
| .of_match_table = svgactrl_of_match, |
| }, |
| .probe = grvga_probe, |
| .remove = grvga_remove, |
| }; |
| |
| module_platform_driver(grvga_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Aeroflex Gaisler"); |
| MODULE_DESCRIPTION("Aeroflex Gaisler framebuffer device driver"); |