| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Backlight driver for Maxim MAX8925 |
| * |
| * Copyright (C) 2009 Marvell International Ltd. |
| * Haojian Zhuang <haojian.zhuang@marvell.com> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/fb.h> |
| #include <linux/i2c.h> |
| #include <linux/backlight.h> |
| #include <linux/mfd/max8925.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| #define MAX_BRIGHTNESS (0xff) |
| #define MIN_BRIGHTNESS (0) |
| |
| #define LWX_FREQ(x) (((x - 601) / 100) & 0x7) |
| |
| struct max8925_backlight_data { |
| struct max8925_chip *chip; |
| |
| int current_brightness; |
| int reg_mode_cntl; |
| int reg_cntl; |
| }; |
| |
| static int max8925_backlight_set(struct backlight_device *bl, int brightness) |
| { |
| struct max8925_backlight_data *data = bl_get_data(bl); |
| struct max8925_chip *chip = data->chip; |
| unsigned char value; |
| int ret; |
| |
| if (brightness > MAX_BRIGHTNESS) |
| value = MAX_BRIGHTNESS; |
| else |
| value = brightness; |
| |
| ret = max8925_reg_write(chip->i2c, data->reg_cntl, value); |
| if (ret < 0) |
| goto out; |
| |
| if (!data->current_brightness && brightness) |
| /* enable WLED output */ |
| ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 1); |
| else if (!brightness) |
| /* disable WLED output */ |
| ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 0); |
| if (ret < 0) |
| goto out; |
| dev_dbg(chip->dev, "set brightness %d\n", value); |
| data->current_brightness = value; |
| return 0; |
| out: |
| dev_dbg(chip->dev, "set brightness %d failure with return value:%d\n", |
| value, ret); |
| return ret; |
| } |
| |
| static int max8925_backlight_update_status(struct backlight_device *bl) |
| { |
| int brightness = bl->props.brightness; |
| |
| if (bl->props.power != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| if (bl->props.fb_blank != FB_BLANK_UNBLANK) |
| brightness = 0; |
| |
| if (bl->props.state & BL_CORE_SUSPENDED) |
| brightness = 0; |
| |
| return max8925_backlight_set(bl, brightness); |
| } |
| |
| static int max8925_backlight_get_brightness(struct backlight_device *bl) |
| { |
| struct max8925_backlight_data *data = bl_get_data(bl); |
| struct max8925_chip *chip = data->chip; |
| int ret; |
| |
| ret = max8925_reg_read(chip->i2c, data->reg_cntl); |
| if (ret < 0) |
| return -EINVAL; |
| data->current_brightness = ret; |
| dev_dbg(chip->dev, "get brightness %d\n", data->current_brightness); |
| return ret; |
| } |
| |
| static const struct backlight_ops max8925_backlight_ops = { |
| .options = BL_CORE_SUSPENDRESUME, |
| .update_status = max8925_backlight_update_status, |
| .get_brightness = max8925_backlight_get_brightness, |
| }; |
| |
| static void max8925_backlight_dt_init(struct platform_device *pdev) |
| { |
| struct device_node *nproot = pdev->dev.parent->of_node, *np; |
| struct max8925_backlight_pdata *pdata; |
| u32 val; |
| |
| if (!nproot || !IS_ENABLED(CONFIG_OF)) |
| return; |
| |
| pdata = devm_kzalloc(&pdev->dev, |
| sizeof(struct max8925_backlight_pdata), |
| GFP_KERNEL); |
| if (!pdata) |
| return; |
| |
| np = of_get_child_by_name(nproot, "backlight"); |
| if (!np) { |
| dev_err(&pdev->dev, "failed to find backlight node\n"); |
| return; |
| } |
| |
| if (!of_property_read_u32(np, "maxim,max8925-dual-string", &val)) |
| pdata->dual_string = val; |
| |
| of_node_put(np); |
| |
| pdev->dev.platform_data = pdata; |
| } |
| |
| static int max8925_backlight_probe(struct platform_device *pdev) |
| { |
| struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| struct max8925_backlight_pdata *pdata; |
| struct max8925_backlight_data *data; |
| struct backlight_device *bl; |
| struct backlight_properties props; |
| struct resource *res; |
| unsigned char value; |
| int ret = 0; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct max8925_backlight_data), |
| GFP_KERNEL); |
| if (data == NULL) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_REG, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "No REG resource for mode control!\n"); |
| return -ENXIO; |
| } |
| data->reg_mode_cntl = res->start; |
| res = platform_get_resource(pdev, IORESOURCE_REG, 1); |
| if (!res) { |
| dev_err(&pdev->dev, "No REG resource for control!\n"); |
| return -ENXIO; |
| } |
| data->reg_cntl = res->start; |
| |
| data->chip = chip; |
| data->current_brightness = 0; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = MAX_BRIGHTNESS; |
| bl = devm_backlight_device_register(&pdev->dev, "max8925-backlight", |
| &pdev->dev, data, |
| &max8925_backlight_ops, &props); |
| if (IS_ERR(bl)) { |
| dev_err(&pdev->dev, "failed to register backlight\n"); |
| return PTR_ERR(bl); |
| } |
| bl->props.brightness = MAX_BRIGHTNESS; |
| |
| platform_set_drvdata(pdev, bl); |
| |
| value = 0; |
| if (!pdev->dev.platform_data) |
| max8925_backlight_dt_init(pdev); |
| |
| pdata = pdev->dev.platform_data; |
| if (pdata) { |
| if (pdata->lxw_scl) |
| value |= (1 << 7); |
| if (pdata->lxw_freq) |
| value |= (LWX_FREQ(pdata->lxw_freq) << 4); |
| if (pdata->dual_string) |
| value |= (1 << 1); |
| } |
| ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 0xfe, value); |
| if (ret < 0) |
| return ret; |
| backlight_update_status(bl); |
| return 0; |
| } |
| |
| static struct platform_driver max8925_backlight_driver = { |
| .driver = { |
| .name = "max8925-backlight", |
| }, |
| .probe = max8925_backlight_probe, |
| }; |
| |
| module_platform_driver(max8925_backlight_driver); |
| |
| MODULE_DESCRIPTION("Backlight Driver for Maxim MAX8925"); |
| MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:max8925-backlight"); |