| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2006-2008 Nokia Corporation |
| * |
| * Test OOB read and write on MTD device. |
| * |
| * Author: Adrian Hunter <ext-adrian.hunter@nokia.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <asm/div64.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/err.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/random.h> |
| |
| #include "mtd_test.h" |
| |
| static int dev = -EINVAL; |
| static int bitflip_limit; |
| module_param(dev, int, S_IRUGO); |
| MODULE_PARM_DESC(dev, "MTD device number to use"); |
| module_param(bitflip_limit, int, S_IRUGO); |
| MODULE_PARM_DESC(bitflip_limit, "Max. allowed bitflips per page"); |
| |
| static struct mtd_info *mtd; |
| static unsigned char *readbuf; |
| static unsigned char *writebuf; |
| static unsigned char *bbt; |
| |
| static int ebcnt; |
| static int pgcnt; |
| static int errcnt; |
| static int use_offset; |
| static int use_len; |
| static int use_len_max; |
| static int vary_offset; |
| static struct rnd_state rnd_state; |
| |
| static void do_vary_offset(void) |
| { |
| use_len -= 1; |
| if (use_len < 1) { |
| use_offset += 1; |
| if (use_offset >= use_len_max) |
| use_offset = 0; |
| use_len = use_len_max - use_offset; |
| } |
| } |
| |
| static int write_eraseblock(int ebnum) |
| { |
| int i; |
| struct mtd_oob_ops ops; |
| int err = 0; |
| loff_t addr = (loff_t)ebnum * mtd->erasesize; |
| |
| prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); |
| for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = use_len; |
| ops.oobretlen = 0; |
| ops.ooboffs = use_offset; |
| ops.datbuf = NULL; |
| ops.oobbuf = writebuf + (use_len_max * i) + use_offset; |
| err = mtd_write_oob(mtd, addr, &ops); |
| if (err || ops.oobretlen != use_len) { |
| pr_err("error: writeoob failed at %#llx\n", |
| (long long)addr); |
| pr_err("error: use_len %d, use_offset %d\n", |
| use_len, use_offset); |
| errcnt += 1; |
| return err ? err : -1; |
| } |
| if (vary_offset) |
| do_vary_offset(); |
| } |
| |
| return err; |
| } |
| |
| static int write_whole_device(void) |
| { |
| int err; |
| unsigned int i; |
| |
| pr_info("writing OOBs of whole device\n"); |
| for (i = 0; i < ebcnt; ++i) { |
| if (bbt[i]) |
| continue; |
| err = write_eraseblock(i); |
| if (err) |
| return err; |
| if (i % 256 == 0) |
| pr_info("written up to eraseblock %u\n", i); |
| |
| err = mtdtest_relax(); |
| if (err) |
| return err; |
| } |
| pr_info("written %u eraseblocks\n", i); |
| return 0; |
| } |
| |
| /* |
| * Display the address, offset and data bytes at comparison failure. |
| * Return number of bitflips encountered. |
| */ |
| static size_t memcmpshowoffset(loff_t addr, loff_t offset, const void *cs, |
| const void *ct, size_t count) |
| { |
| const unsigned char *su1, *su2; |
| int res; |
| size_t i = 0; |
| size_t bitflips = 0; |
| |
| for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--, i++) { |
| res = *su1 ^ *su2; |
| if (res) { |
| pr_info("error @addr[0x%lx:0x%lx] 0x%x -> 0x%x diff 0x%x\n", |
| (unsigned long)addr, (unsigned long)offset + i, |
| *su1, *su2, res); |
| bitflips += hweight8(res); |
| } |
| } |
| |
| return bitflips; |
| } |
| |
| #define memcmpshow(addr, cs, ct, count) memcmpshowoffset((addr), 0, (cs), (ct),\ |
| (count)) |
| |
| /* |
| * Compare with 0xff and show the address, offset and data bytes at |
| * comparison failure. Return number of bitflips encountered. |
| */ |
| static size_t memffshow(loff_t addr, loff_t offset, const void *cs, |
| size_t count) |
| { |
| const unsigned char *su1; |
| int res; |
| size_t i = 0; |
| size_t bitflips = 0; |
| |
| for (su1 = cs; 0 < count; ++su1, count--, i++) { |
| res = *su1 ^ 0xff; |
| if (res) { |
| pr_info("error @addr[0x%lx:0x%lx] 0x%x -> 0xff diff 0x%x\n", |
| (unsigned long)addr, (unsigned long)offset + i, |
| *su1, res); |
| bitflips += hweight8(res); |
| } |
| } |
| |
| return bitflips; |
| } |
| |
| static int verify_eraseblock(int ebnum) |
| { |
| int i; |
| struct mtd_oob_ops ops; |
| int err = 0; |
| loff_t addr = (loff_t)ebnum * mtd->erasesize; |
| size_t bitflips; |
| |
| prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt); |
| for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = use_len; |
| ops.oobretlen = 0; |
| ops.ooboffs = use_offset; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| err = mtd_read_oob(mtd, addr, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err || ops.oobretlen != use_len) { |
| pr_err("error: readoob failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| return err ? err : -1; |
| } |
| |
| bitflips = memcmpshow(addr, readbuf, |
| writebuf + (use_len_max * i) + use_offset, |
| use_len); |
| if (bitflips > bitflip_limit) { |
| pr_err("error: verify failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| if (errcnt > 1000) { |
| pr_err("error: too many errors\n"); |
| return -1; |
| } |
| } else if (bitflips) { |
| pr_info("ignoring error as within bitflip_limit\n"); |
| } |
| |
| if (use_offset != 0 || use_len < mtd->oobavail) { |
| int k; |
| |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = mtd->oobavail; |
| ops.oobretlen = 0; |
| ops.ooboffs = 0; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| err = mtd_read_oob(mtd, addr, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err || ops.oobretlen != mtd->oobavail) { |
| pr_err("error: readoob failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| return err ? err : -1; |
| } |
| bitflips = memcmpshowoffset(addr, use_offset, |
| readbuf + use_offset, |
| writebuf + (use_len_max * i) + use_offset, |
| use_len); |
| |
| /* verify pre-offset area for 0xff */ |
| bitflips += memffshow(addr, 0, readbuf, use_offset); |
| |
| /* verify post-(use_offset + use_len) area for 0xff */ |
| k = use_offset + use_len; |
| bitflips += memffshow(addr, k, readbuf + k, |
| mtd->oobavail - k); |
| |
| if (bitflips > bitflip_limit) { |
| pr_err("error: verify failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| if (errcnt > 1000) { |
| pr_err("error: too many errors\n"); |
| return -1; |
| } |
| } else if (bitflips) { |
| pr_info("ignoring errors as within bitflip limit\n"); |
| } |
| } |
| if (vary_offset) |
| do_vary_offset(); |
| } |
| return err; |
| } |
| |
| static int verify_eraseblock_in_one_go(int ebnum) |
| { |
| struct mtd_oob_ops ops; |
| int err = 0; |
| loff_t addr = (loff_t)ebnum * mtd->erasesize; |
| size_t len = mtd->oobavail * pgcnt; |
| size_t oobavail = mtd->oobavail; |
| size_t bitflips; |
| int i; |
| |
| prandom_bytes_state(&rnd_state, writebuf, len); |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = len; |
| ops.oobretlen = 0; |
| ops.ooboffs = 0; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| |
| /* read entire block's OOB at one go */ |
| err = mtd_read_oob(mtd, addr, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err || ops.oobretlen != len) { |
| pr_err("error: readoob failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| return err ? err : -1; |
| } |
| |
| /* verify one page OOB at a time for bitflip per page limit check */ |
| for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) { |
| bitflips = memcmpshow(addr, readbuf + (i * oobavail), |
| writebuf + (i * oobavail), oobavail); |
| if (bitflips > bitflip_limit) { |
| pr_err("error: verify failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| if (errcnt > 1000) { |
| pr_err("error: too many errors\n"); |
| return -1; |
| } |
| } else if (bitflips) { |
| pr_info("ignoring error as within bitflip_limit\n"); |
| } |
| } |
| |
| return err; |
| } |
| |
| static int verify_all_eraseblocks(void) |
| { |
| int err; |
| unsigned int i; |
| |
| pr_info("verifying all eraseblocks\n"); |
| for (i = 0; i < ebcnt; ++i) { |
| if (bbt[i]) |
| continue; |
| err = verify_eraseblock(i); |
| if (err) |
| return err; |
| if (i % 256 == 0) |
| pr_info("verified up to eraseblock %u\n", i); |
| |
| err = mtdtest_relax(); |
| if (err) |
| return err; |
| } |
| pr_info("verified %u eraseblocks\n", i); |
| return 0; |
| } |
| |
| static int __init mtd_oobtest_init(void) |
| { |
| int err = 0; |
| unsigned int i; |
| uint64_t tmp; |
| struct mtd_oob_ops ops; |
| loff_t addr = 0, addr0; |
| |
| printk(KERN_INFO "\n"); |
| printk(KERN_INFO "=================================================\n"); |
| |
| if (dev < 0) { |
| pr_info("Please specify a valid mtd-device via module parameter\n"); |
| pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n"); |
| return -EINVAL; |
| } |
| |
| pr_info("MTD device: %d\n", dev); |
| |
| mtd = get_mtd_device(NULL, dev); |
| if (IS_ERR(mtd)) { |
| err = PTR_ERR(mtd); |
| pr_err("error: cannot get MTD device\n"); |
| return err; |
| } |
| |
| if (!mtd_type_is_nand(mtd)) { |
| pr_info("this test requires NAND flash\n"); |
| goto out; |
| } |
| |
| tmp = mtd->size; |
| do_div(tmp, mtd->erasesize); |
| ebcnt = tmp; |
| pgcnt = mtd->erasesize / mtd->writesize; |
| |
| pr_info("MTD device size %llu, eraseblock size %u, " |
| "page size %u, count of eraseblocks %u, pages per " |
| "eraseblock %u, OOB size %u\n", |
| (unsigned long long)mtd->size, mtd->erasesize, |
| mtd->writesize, ebcnt, pgcnt, mtd->oobsize); |
| |
| err = -ENOMEM; |
| readbuf = kmalloc(mtd->erasesize, GFP_KERNEL); |
| if (!readbuf) |
| goto out; |
| writebuf = kmalloc(mtd->erasesize, GFP_KERNEL); |
| if (!writebuf) |
| goto out; |
| bbt = kzalloc(ebcnt, GFP_KERNEL); |
| if (!bbt) |
| goto out; |
| |
| err = mtdtest_scan_for_bad_eraseblocks(mtd, bbt, 0, ebcnt); |
| if (err) |
| goto out; |
| |
| use_offset = 0; |
| use_len = mtd->oobavail; |
| use_len_max = mtd->oobavail; |
| vary_offset = 0; |
| |
| /* First test: write all OOB, read it back and verify */ |
| pr_info("test 1 of 5\n"); |
| |
| err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt); |
| if (err) |
| goto out; |
| |
| prandom_seed_state(&rnd_state, 1); |
| err = write_whole_device(); |
| if (err) |
| goto out; |
| |
| prandom_seed_state(&rnd_state, 1); |
| err = verify_all_eraseblocks(); |
| if (err) |
| goto out; |
| |
| /* |
| * Second test: write all OOB, a block at a time, read it back and |
| * verify. |
| */ |
| pr_info("test 2 of 5\n"); |
| |
| err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt); |
| if (err) |
| goto out; |
| |
| prandom_seed_state(&rnd_state, 3); |
| err = write_whole_device(); |
| if (err) |
| goto out; |
| |
| /* Check all eraseblocks */ |
| prandom_seed_state(&rnd_state, 3); |
| pr_info("verifying all eraseblocks\n"); |
| for (i = 0; i < ebcnt; ++i) { |
| if (bbt[i]) |
| continue; |
| err = verify_eraseblock_in_one_go(i); |
| if (err) |
| goto out; |
| if (i % 256 == 0) |
| pr_info("verified up to eraseblock %u\n", i); |
| |
| err = mtdtest_relax(); |
| if (err) |
| goto out; |
| } |
| pr_info("verified %u eraseblocks\n", i); |
| |
| /* |
| * Third test: write OOB at varying offsets and lengths, read it back |
| * and verify. |
| */ |
| pr_info("test 3 of 5\n"); |
| |
| err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt); |
| if (err) |
| goto out; |
| |
| /* Write all eraseblocks */ |
| use_offset = 0; |
| use_len = mtd->oobavail; |
| use_len_max = mtd->oobavail; |
| vary_offset = 1; |
| prandom_seed_state(&rnd_state, 5); |
| |
| err = write_whole_device(); |
| if (err) |
| goto out; |
| |
| /* Check all eraseblocks */ |
| use_offset = 0; |
| use_len = mtd->oobavail; |
| use_len_max = mtd->oobavail; |
| vary_offset = 1; |
| prandom_seed_state(&rnd_state, 5); |
| err = verify_all_eraseblocks(); |
| if (err) |
| goto out; |
| |
| use_offset = 0; |
| use_len = mtd->oobavail; |
| use_len_max = mtd->oobavail; |
| vary_offset = 0; |
| |
| /* Fourth test: try to write off end of device */ |
| pr_info("test 4 of 5\n"); |
| |
| err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt); |
| if (err) |
| goto out; |
| |
| addr0 = 0; |
| for (i = 0; i < ebcnt && bbt[i]; ++i) |
| addr0 += mtd->erasesize; |
| |
| /* Attempt to write off end of OOB */ |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = 1; |
| ops.oobretlen = 0; |
| ops.ooboffs = mtd->oobavail; |
| ops.datbuf = NULL; |
| ops.oobbuf = writebuf; |
| pr_info("attempting to start write past end of OOB\n"); |
| pr_info("an error is expected...\n"); |
| err = mtd_write_oob(mtd, addr0, &ops); |
| if (err) { |
| pr_info("error occurred as expected\n"); |
| err = 0; |
| } else { |
| pr_err("error: can write past end of OOB\n"); |
| errcnt += 1; |
| } |
| |
| /* Attempt to read off end of OOB */ |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = 1; |
| ops.oobretlen = 0; |
| ops.ooboffs = mtd->oobavail; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| pr_info("attempting to start read past end of OOB\n"); |
| pr_info("an error is expected...\n"); |
| err = mtd_read_oob(mtd, addr0, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err) { |
| pr_info("error occurred as expected\n"); |
| err = 0; |
| } else { |
| pr_err("error: can read past end of OOB\n"); |
| errcnt += 1; |
| } |
| |
| if (bbt[ebcnt - 1]) |
| pr_info("skipping end of device tests because last " |
| "block is bad\n"); |
| else { |
| /* Attempt to write off end of device */ |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = mtd->oobavail + 1; |
| ops.oobretlen = 0; |
| ops.ooboffs = 0; |
| ops.datbuf = NULL; |
| ops.oobbuf = writebuf; |
| pr_info("attempting to write past end of device\n"); |
| pr_info("an error is expected...\n"); |
| err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops); |
| if (err) { |
| pr_info("error occurred as expected\n"); |
| err = 0; |
| } else { |
| pr_err("error: wrote past end of device\n"); |
| errcnt += 1; |
| } |
| |
| /* Attempt to read off end of device */ |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = mtd->oobavail + 1; |
| ops.oobretlen = 0; |
| ops.ooboffs = 0; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| pr_info("attempting to read past end of device\n"); |
| pr_info("an error is expected...\n"); |
| err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err) { |
| pr_info("error occurred as expected\n"); |
| err = 0; |
| } else { |
| pr_err("error: read past end of device\n"); |
| errcnt += 1; |
| } |
| |
| err = mtdtest_erase_eraseblock(mtd, ebcnt - 1); |
| if (err) |
| goto out; |
| |
| /* Attempt to write off end of device */ |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = mtd->oobavail; |
| ops.oobretlen = 0; |
| ops.ooboffs = 1; |
| ops.datbuf = NULL; |
| ops.oobbuf = writebuf; |
| pr_info("attempting to write past end of device\n"); |
| pr_info("an error is expected...\n"); |
| err = mtd_write_oob(mtd, mtd->size - mtd->writesize, &ops); |
| if (err) { |
| pr_info("error occurred as expected\n"); |
| err = 0; |
| } else { |
| pr_err("error: wrote past end of device\n"); |
| errcnt += 1; |
| } |
| |
| /* Attempt to read off end of device */ |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = mtd->oobavail; |
| ops.oobretlen = 0; |
| ops.ooboffs = 1; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| pr_info("attempting to read past end of device\n"); |
| pr_info("an error is expected...\n"); |
| err = mtd_read_oob(mtd, mtd->size - mtd->writesize, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err) { |
| pr_info("error occurred as expected\n"); |
| err = 0; |
| } else { |
| pr_err("error: read past end of device\n"); |
| errcnt += 1; |
| } |
| } |
| |
| /* Fifth test: write / read across block boundaries */ |
| pr_info("test 5 of 5\n"); |
| |
| /* Erase all eraseblocks */ |
| err = mtdtest_erase_good_eraseblocks(mtd, bbt, 0, ebcnt); |
| if (err) |
| goto out; |
| |
| /* Write all eraseblocks */ |
| prandom_seed_state(&rnd_state, 11); |
| pr_info("writing OOBs of whole device\n"); |
| for (i = 0; i < ebcnt - 1; ++i) { |
| int cnt = 2; |
| int pg; |
| size_t sz = mtd->oobavail; |
| if (bbt[i] || bbt[i + 1]) |
| continue; |
| addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize; |
| prandom_bytes_state(&rnd_state, writebuf, sz * cnt); |
| for (pg = 0; pg < cnt; ++pg) { |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = sz; |
| ops.oobretlen = 0; |
| ops.ooboffs = 0; |
| ops.datbuf = NULL; |
| ops.oobbuf = writebuf + pg * sz; |
| err = mtd_write_oob(mtd, addr, &ops); |
| if (err) |
| goto out; |
| if (i % 256 == 0) |
| pr_info("written up to eraseblock %u\n", i); |
| |
| err = mtdtest_relax(); |
| if (err) |
| goto out; |
| |
| addr += mtd->writesize; |
| } |
| } |
| pr_info("written %u eraseblocks\n", i); |
| |
| /* Check all eraseblocks */ |
| prandom_seed_state(&rnd_state, 11); |
| pr_info("verifying all eraseblocks\n"); |
| for (i = 0; i < ebcnt - 1; ++i) { |
| if (bbt[i] || bbt[i + 1]) |
| continue; |
| prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2); |
| addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize; |
| ops.mode = MTD_OPS_AUTO_OOB; |
| ops.len = 0; |
| ops.retlen = 0; |
| ops.ooblen = mtd->oobavail * 2; |
| ops.oobretlen = 0; |
| ops.ooboffs = 0; |
| ops.datbuf = NULL; |
| ops.oobbuf = readbuf; |
| err = mtd_read_oob(mtd, addr, &ops); |
| if (mtd_is_bitflip(err)) |
| err = 0; |
| |
| if (err) |
| goto out; |
| if (memcmpshow(addr, readbuf, writebuf, |
| mtd->oobavail * 2)) { |
| pr_err("error: verify failed at %#llx\n", |
| (long long)addr); |
| errcnt += 1; |
| if (errcnt > 1000) { |
| pr_err("error: too many errors\n"); |
| goto out; |
| } |
| } |
| if (i % 256 == 0) |
| pr_info("verified up to eraseblock %u\n", i); |
| |
| err = mtdtest_relax(); |
| if (err) |
| goto out; |
| } |
| pr_info("verified %u eraseblocks\n", i); |
| |
| pr_info("finished with %d errors\n", errcnt); |
| out: |
| kfree(bbt); |
| kfree(writebuf); |
| kfree(readbuf); |
| put_mtd_device(mtd); |
| if (err) |
| pr_info("error %d occurred\n", err); |
| printk(KERN_INFO "=================================================\n"); |
| return err; |
| } |
| module_init(mtd_oobtest_init); |
| |
| static void __exit mtd_oobtest_exit(void) |
| { |
| return; |
| } |
| module_exit(mtd_oobtest_exit); |
| |
| MODULE_DESCRIPTION("Out-of-band test module"); |
| MODULE_AUTHOR("Adrian Hunter"); |
| MODULE_LICENSE("GPL"); |
