| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * horus3a.h |
| * |
| * Sony Horus3A DVB-S/S2 tuner driver |
| * |
| * Copyright 2012 Sony Corporation |
| * Copyright (C) 2014 NetUP Inc. |
| * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru> |
| * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru> |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/dvb/frontend.h> |
| #include <linux/types.h> |
| #include "horus3a.h" |
| #include <media/dvb_frontend.h> |
| |
| #define MAX_WRITE_REGSIZE 5 |
| |
| enum horus3a_state { |
| STATE_UNKNOWN, |
| STATE_SLEEP, |
| STATE_ACTIVE |
| }; |
| |
| struct horus3a_priv { |
| u32 frequency; |
| u8 i2c_address; |
| struct i2c_adapter *i2c; |
| enum horus3a_state state; |
| void *set_tuner_data; |
| int (*set_tuner)(void *, int); |
| }; |
| |
| static void horus3a_i2c_debug(struct horus3a_priv *priv, |
| u8 reg, u8 write, const u8 *data, u32 len) |
| { |
| dev_dbg(&priv->i2c->dev, "horus3a: I2C %s reg 0x%02x size %d\n", |
| (write == 0 ? "read" : "write"), reg, len); |
| print_hex_dump_bytes("horus3a: I2C data: ", |
| DUMP_PREFIX_OFFSET, data, len); |
| } |
| |
| static int horus3a_write_regs(struct horus3a_priv *priv, |
| u8 reg, const u8 *data, u32 len) |
| { |
| int ret; |
| u8 buf[MAX_WRITE_REGSIZE + 1]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = priv->i2c_address, |
| .flags = 0, |
| .len = len + 1, |
| .buf = buf, |
| } |
| }; |
| |
| if (len + 1 > sizeof(buf)) { |
| dev_warn(&priv->i2c->dev,"wr reg=%04x: len=%d is too big!\n", |
| reg, len + 1); |
| return -E2BIG; |
| } |
| |
| horus3a_i2c_debug(priv, reg, 1, data, len); |
| buf[0] = reg; |
| memcpy(&buf[1], data, len); |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret >= 0 && ret != 1) |
| ret = -EREMOTEIO; |
| if (ret < 0) { |
| dev_warn(&priv->i2c->dev, |
| "%s: i2c wr failed=%d reg=%02x len=%d\n", |
| KBUILD_MODNAME, ret, reg, len); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int horus3a_write_reg(struct horus3a_priv *priv, u8 reg, u8 val) |
| { |
| u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */ |
| |
| return horus3a_write_regs(priv, reg, &tmp, 1); |
| } |
| |
| static int horus3a_enter_power_save(struct horus3a_priv *priv) |
| { |
| u8 data[2]; |
| |
| dev_dbg(&priv->i2c->dev, "%s()\n", __func__); |
| if (priv->state == STATE_SLEEP) |
| return 0; |
| /* IQ Generator disable */ |
| horus3a_write_reg(priv, 0x2a, 0x79); |
| /* MDIV_EN = 0 */ |
| horus3a_write_reg(priv, 0x29, 0x70); |
| /* VCO disable preparation */ |
| horus3a_write_reg(priv, 0x28, 0x3e); |
| /* VCO buffer disable */ |
| horus3a_write_reg(priv, 0x2a, 0x19); |
| /* VCO calibration disable */ |
| horus3a_write_reg(priv, 0x1c, 0x00); |
| /* Power save setting (xtal is not stopped) */ |
| data[0] = 0xC0; |
| /* LNA is Disabled */ |
| data[1] = 0xA7; |
| /* 0x11 - 0x12 */ |
| horus3a_write_regs(priv, 0x11, data, sizeof(data)); |
| priv->state = STATE_SLEEP; |
| return 0; |
| } |
| |
| static int horus3a_leave_power_save(struct horus3a_priv *priv) |
| { |
| u8 data[2]; |
| |
| dev_dbg(&priv->i2c->dev, "%s()\n", __func__); |
| if (priv->state == STATE_ACTIVE) |
| return 0; |
| /* Leave power save */ |
| data[0] = 0x00; |
| /* LNA is Disabled */ |
| data[1] = 0xa7; |
| /* 0x11 - 0x12 */ |
| horus3a_write_regs(priv, 0x11, data, sizeof(data)); |
| /* VCO buffer enable */ |
| horus3a_write_reg(priv, 0x2a, 0x79); |
| /* VCO calibration enable */ |
| horus3a_write_reg(priv, 0x1c, 0xc0); |
| /* MDIV_EN = 1 */ |
| horus3a_write_reg(priv, 0x29, 0x71); |
| usleep_range(5000, 7000); |
| priv->state = STATE_ACTIVE; |
| return 0; |
| } |
| |
| static int horus3a_init(struct dvb_frontend *fe) |
| { |
| struct horus3a_priv *priv = fe->tuner_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s()\n", __func__); |
| return 0; |
| } |
| |
| static void horus3a_release(struct dvb_frontend *fe) |
| { |
| struct horus3a_priv *priv = fe->tuner_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s()\n", __func__); |
| kfree(fe->tuner_priv); |
| fe->tuner_priv = NULL; |
| } |
| |
| static int horus3a_sleep(struct dvb_frontend *fe) |
| { |
| struct horus3a_priv *priv = fe->tuner_priv; |
| |
| dev_dbg(&priv->i2c->dev, "%s()\n", __func__); |
| horus3a_enter_power_save(priv); |
| return 0; |
| } |
| |
| static int horus3a_set_params(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct horus3a_priv *priv = fe->tuner_priv; |
| u32 frequency = p->frequency; |
| u32 symbol_rate = p->symbol_rate/1000; |
| u8 mixdiv = 0; |
| u8 mdiv = 0; |
| u32 ms = 0; |
| u8 f_ctl = 0; |
| u8 g_ctl = 0; |
| u8 fc_lpf = 0; |
| u8 data[5]; |
| |
| dev_dbg(&priv->i2c->dev, "%s(): frequency %dkHz symbol_rate %dksps\n", |
| __func__, frequency, symbol_rate); |
| if (priv->set_tuner) |
| priv->set_tuner(priv->set_tuner_data, 0); |
| if (priv->state == STATE_SLEEP) |
| horus3a_leave_power_save(priv); |
| |
| /* frequency should be X MHz (X : integer) */ |
| frequency = DIV_ROUND_CLOSEST(frequency, 1000) * 1000; |
| if (frequency <= 1155000) { |
| mixdiv = 4; |
| mdiv = 1; |
| } else { |
| mixdiv = 2; |
| mdiv = 0; |
| } |
| /* Assumed that fREF == 1MHz (1000kHz) */ |
| ms = DIV_ROUND_CLOSEST((frequency * mixdiv) / 2, 1000); |
| if (ms > 0x7FFF) { /* 15 bit */ |
| dev_err(&priv->i2c->dev, "horus3a: invalid frequency %d\n", |
| frequency); |
| return -EINVAL; |
| } |
| if (frequency < 975000) { |
| /* F_CTL=11100 G_CTL=001 */ |
| f_ctl = 0x1C; |
| g_ctl = 0x01; |
| } else if (frequency < 1050000) { |
| /* F_CTL=11000 G_CTL=010 */ |
| f_ctl = 0x18; |
| g_ctl = 0x02; |
| } else if (frequency < 1150000) { |
| /* F_CTL=10100 G_CTL=010 */ |
| f_ctl = 0x14; |
| g_ctl = 0x02; |
| } else if (frequency < 1250000) { |
| /* F_CTL=10000 G_CTL=011 */ |
| f_ctl = 0x10; |
| g_ctl = 0x03; |
| } else if (frequency < 1350000) { |
| /* F_CTL=01100 G_CTL=100 */ |
| f_ctl = 0x0C; |
| g_ctl = 0x04; |
| } else if (frequency < 1450000) { |
| /* F_CTL=01010 G_CTL=100 */ |
| f_ctl = 0x0A; |
| g_ctl = 0x04; |
| } else if (frequency < 1600000) { |
| /* F_CTL=00111 G_CTL=101 */ |
| f_ctl = 0x07; |
| g_ctl = 0x05; |
| } else if (frequency < 1800000) { |
| /* F_CTL=00100 G_CTL=010 */ |
| f_ctl = 0x04; |
| g_ctl = 0x02; |
| } else if (frequency < 2000000) { |
| /* F_CTL=00010 G_CTL=001 */ |
| f_ctl = 0x02; |
| g_ctl = 0x01; |
| } else { |
| /* F_CTL=00000 G_CTL=000 */ |
| f_ctl = 0x00; |
| g_ctl = 0x00; |
| } |
| /* LPF cutoff frequency setting */ |
| if (p->delivery_system == SYS_DVBS) { |
| /* |
| * rolloff = 0.35 |
| * SR <= 4.3 |
| * fc_lpf = 5 |
| * 4.3 < SR <= 10 |
| * fc_lpf = SR * (1 + rolloff) / 2 + SR / 2 = |
| * SR * 1.175 = SR * (47/40) |
| * 10 < SR |
| * fc_lpf = SR * (1 + rolloff) / 2 + 5 = |
| * SR * 0.675 + 5 = SR * (27/40) + 5 |
| * NOTE: The result should be round up. |
| */ |
| if (symbol_rate <= 4300) |
| fc_lpf = 5; |
| else if (symbol_rate <= 10000) |
| fc_lpf = (u8)DIV_ROUND_UP(symbol_rate * 47, 40000); |
| else |
| fc_lpf = (u8)DIV_ROUND_UP(symbol_rate * 27, 40000) + 5; |
| /* 5 <= fc_lpf <= 36 */ |
| if (fc_lpf > 36) |
| fc_lpf = 36; |
| } else if (p->delivery_system == SYS_DVBS2) { |
| /* |
| * SR <= 4.5: |
| * fc_lpf = 5 |
| * 4.5 < SR <= 10: |
| * fc_lpf = SR * (1 + rolloff) / 2 + SR / 2 |
| * 10 < SR: |
| * fc_lpf = SR * (1 + rolloff) / 2 + 5 |
| * NOTE: The result should be round up. |
| */ |
| if (symbol_rate <= 4500) |
| fc_lpf = 5; |
| else if (symbol_rate <= 10000) |
| fc_lpf = (u8)((symbol_rate * 11 + (10000-1)) / 10000); |
| else |
| fc_lpf = (u8)((symbol_rate * 3 + (5000-1)) / 5000 + 5); |
| /* 5 <= fc_lpf <= 36 is valid */ |
| if (fc_lpf > 36) |
| fc_lpf = 36; |
| } else { |
| dev_err(&priv->i2c->dev, |
| "horus3a: invalid delivery system %d\n", |
| p->delivery_system); |
| return -EINVAL; |
| } |
| /* 0x00 - 0x04 */ |
| data[0] = (u8)((ms >> 7) & 0xFF); |
| data[1] = (u8)((ms << 1) & 0xFF); |
| data[2] = 0x00; |
| data[3] = 0x00; |
| data[4] = (u8)(mdiv << 7); |
| horus3a_write_regs(priv, 0x00, data, sizeof(data)); |
| /* Write G_CTL, F_CTL */ |
| horus3a_write_reg(priv, 0x09, (u8)((g_ctl << 5) | f_ctl)); |
| /* Write LPF cutoff frequency */ |
| horus3a_write_reg(priv, 0x37, (u8)(0x80 | (fc_lpf << 1))); |
| /* Start Calibration */ |
| horus3a_write_reg(priv, 0x05, 0x80); |
| /* IQ Generator enable */ |
| horus3a_write_reg(priv, 0x2a, 0x7b); |
| /* tuner stabilization time */ |
| msleep(60); |
| /* Store tuned frequency to the struct */ |
| priv->frequency = ms * 2 * 1000 / mixdiv; |
| return 0; |
| } |
| |
| static int horus3a_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct horus3a_priv *priv = fe->tuner_priv; |
| |
| *frequency = priv->frequency; |
| return 0; |
| } |
| |
| static const struct dvb_tuner_ops horus3a_tuner_ops = { |
| .info = { |
| .name = "Sony Horus3a", |
| .frequency_min_hz = 950 * MHz, |
| .frequency_max_hz = 2150 * MHz, |
| .frequency_step_hz = 1 * MHz, |
| }, |
| .init = horus3a_init, |
| .release = horus3a_release, |
| .sleep = horus3a_sleep, |
| .set_params = horus3a_set_params, |
| .get_frequency = horus3a_get_frequency, |
| }; |
| |
| struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe, |
| const struct horus3a_config *config, |
| struct i2c_adapter *i2c) |
| { |
| u8 buf[3], val; |
| struct horus3a_priv *priv = NULL; |
| |
| priv = kzalloc(sizeof(struct horus3a_priv), GFP_KERNEL); |
| if (priv == NULL) |
| return NULL; |
| priv->i2c_address = (config->i2c_address >> 1); |
| priv->i2c = i2c; |
| priv->set_tuner_data = config->set_tuner_priv; |
| priv->set_tuner = config->set_tuner_callback; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| /* wait 4ms after power on */ |
| usleep_range(4000, 6000); |
| /* IQ Generator disable */ |
| horus3a_write_reg(priv, 0x2a, 0x79); |
| /* REF_R = Xtal Frequency */ |
| buf[0] = config->xtal_freq_mhz; |
| buf[1] = config->xtal_freq_mhz; |
| buf[2] = 0; |
| /* 0x6 - 0x8 */ |
| horus3a_write_regs(priv, 0x6, buf, 3); |
| /* IQ Out = Single Ended */ |
| horus3a_write_reg(priv, 0x0a, 0x40); |
| switch (config->xtal_freq_mhz) { |
| case 27: |
| val = 0x1f; |
| break; |
| case 24: |
| val = 0x10; |
| break; |
| case 16: |
| val = 0xc; |
| break; |
| default: |
| val = 0; |
| dev_warn(&priv->i2c->dev, |
| "horus3a: invalid xtal frequency %dMHz\n", |
| config->xtal_freq_mhz); |
| break; |
| } |
| val <<= 2; |
| horus3a_write_reg(priv, 0x0e, val); |
| horus3a_enter_power_save(priv); |
| usleep_range(3000, 5000); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| |
| memcpy(&fe->ops.tuner_ops, &horus3a_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| fe->tuner_priv = priv; |
| dev_info(&priv->i2c->dev, |
| "Sony HORUS3A attached on addr=%x at I2C adapter %p\n", |
| priv->i2c_address, priv->i2c); |
| return fe; |
| } |
| EXPORT_SYMBOL(horus3a_attach); |
| |
| MODULE_DESCRIPTION("Sony HORUS3A satellite tuner driver"); |
| MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>"); |
| MODULE_LICENSE("GPL"); |