| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * R-Car Gen2 Clock Pulse Generator |
| * |
| * Copyright (C) 2016 Cogent Embedded Inc. |
| */ |
| |
| #include <linux/bug.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/sys_soc.h> |
| |
| #include "renesas-cpg-mssr.h" |
| #include "rcar-gen2-cpg.h" |
| |
| #define CPG_FRQCRB 0x0004 |
| #define CPG_FRQCRB_KICK BIT(31) |
| #define CPG_SDCKCR 0x0074 |
| #define CPG_PLL0CR 0x00d8 |
| #define CPG_PLL0CR_STC_SHIFT 24 |
| #define CPG_PLL0CR_STC_MASK (0x7f << CPG_PLL0CR_STC_SHIFT) |
| #define CPG_FRQCRC 0x00e0 |
| #define CPG_FRQCRC_ZFC_SHIFT 8 |
| #define CPG_FRQCRC_ZFC_MASK (0x1f << CPG_FRQCRC_ZFC_SHIFT) |
| #define CPG_ADSPCKCR 0x025c |
| #define CPG_RCANCKCR 0x0270 |
| |
| static spinlock_t cpg_lock; |
| |
| /* |
| * Z Clock |
| * |
| * Traits of this clock: |
| * prepare - clk_prepare only ensures that parents are prepared |
| * enable - clk_enable only ensures that parents are enabled |
| * rate - rate is adjustable. clk->rate = parent->rate * mult / 32 |
| * parent - fixed parent. No clk_set_parent support |
| */ |
| |
| struct cpg_z_clk { |
| struct clk_hw hw; |
| void __iomem *reg; |
| void __iomem *kick_reg; |
| }; |
| |
| #define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw) |
| |
| static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct cpg_z_clk *zclk = to_z_clk(hw); |
| unsigned int mult; |
| unsigned int val; |
| |
| val = (readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK) >> CPG_FRQCRC_ZFC_SHIFT; |
| mult = 32 - val; |
| |
| return div_u64((u64)parent_rate * mult, 32); |
| } |
| |
| static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| unsigned long prate = *parent_rate; |
| unsigned int mult; |
| |
| if (!prate) |
| prate = 1; |
| |
| mult = div_u64((u64)rate * 32, prate); |
| mult = clamp(mult, 1U, 32U); |
| |
| return *parent_rate / 32 * mult; |
| } |
| |
| static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct cpg_z_clk *zclk = to_z_clk(hw); |
| unsigned int mult; |
| u32 val, kick; |
| unsigned int i; |
| |
| mult = div_u64((u64)rate * 32, parent_rate); |
| mult = clamp(mult, 1U, 32U); |
| |
| if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK) |
| return -EBUSY; |
| |
| val = readl(zclk->reg); |
| val &= ~CPG_FRQCRC_ZFC_MASK; |
| val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT; |
| writel(val, zclk->reg); |
| |
| /* |
| * Set KICK bit in FRQCRB to update hardware setting and wait for |
| * clock change completion. |
| */ |
| kick = readl(zclk->kick_reg); |
| kick |= CPG_FRQCRB_KICK; |
| writel(kick, zclk->kick_reg); |
| |
| /* |
| * Note: There is no HW information about the worst case latency. |
| * |
| * Using experimental measurements, it seems that no more than |
| * ~10 iterations are needed, independently of the CPU rate. |
| * Since this value might be dependent on external xtal rate, pll1 |
| * rate or even the other emulation clocks rate, use 1000 as a |
| * "super" safe value. |
| */ |
| for (i = 1000; i; i--) { |
| if (!(readl(zclk->kick_reg) & CPG_FRQCRB_KICK)) |
| return 0; |
| |
| cpu_relax(); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static const struct clk_ops cpg_z_clk_ops = { |
| .recalc_rate = cpg_z_clk_recalc_rate, |
| .round_rate = cpg_z_clk_round_rate, |
| .set_rate = cpg_z_clk_set_rate, |
| }; |
| |
| static struct clk * __init cpg_z_clk_register(const char *name, |
| const char *parent_name, |
| void __iomem *base) |
| { |
| struct clk_init_data init; |
| struct cpg_z_clk *zclk; |
| struct clk *clk; |
| |
| zclk = kzalloc(sizeof(*zclk), GFP_KERNEL); |
| if (!zclk) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &cpg_z_clk_ops; |
| init.flags = 0; |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| |
| zclk->reg = base + CPG_FRQCRC; |
| zclk->kick_reg = base + CPG_FRQCRB; |
| zclk->hw.init = &init; |
| |
| clk = clk_register(NULL, &zclk->hw); |
| if (IS_ERR(clk)) |
| kfree(zclk); |
| |
| return clk; |
| } |
| |
| static struct clk * __init cpg_rcan_clk_register(const char *name, |
| const char *parent_name, |
| void __iomem *base) |
| { |
| struct clk_fixed_factor *fixed; |
| struct clk_gate *gate; |
| struct clk *clk; |
| |
| fixed = kzalloc(sizeof(*fixed), GFP_KERNEL); |
| if (!fixed) |
| return ERR_PTR(-ENOMEM); |
| |
| fixed->mult = 1; |
| fixed->div = 6; |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) { |
| kfree(fixed); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| gate->reg = base + CPG_RCANCKCR; |
| gate->bit_idx = 8; |
| gate->flags = CLK_GATE_SET_TO_DISABLE; |
| gate->lock = &cpg_lock; |
| |
| clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL, |
| &fixed->hw, &clk_fixed_factor_ops, |
| &gate->hw, &clk_gate_ops, 0); |
| if (IS_ERR(clk)) { |
| kfree(gate); |
| kfree(fixed); |
| } |
| |
| return clk; |
| } |
| |
| /* ADSP divisors */ |
| static const struct clk_div_table cpg_adsp_div_table[] = { |
| { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, |
| { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 }, |
| { 10, 36 }, { 11, 48 }, { 0, 0 }, |
| }; |
| |
| static struct clk * __init cpg_adsp_clk_register(const char *name, |
| const char *parent_name, |
| void __iomem *base) |
| { |
| struct clk_divider *div; |
| struct clk_gate *gate; |
| struct clk *clk; |
| |
| div = kzalloc(sizeof(*div), GFP_KERNEL); |
| if (!div) |
| return ERR_PTR(-ENOMEM); |
| |
| div->reg = base + CPG_ADSPCKCR; |
| div->width = 4; |
| div->table = cpg_adsp_div_table; |
| div->lock = &cpg_lock; |
| |
| gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| if (!gate) { |
| kfree(div); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| gate->reg = base + CPG_ADSPCKCR; |
| gate->bit_idx = 8; |
| gate->flags = CLK_GATE_SET_TO_DISABLE; |
| gate->lock = &cpg_lock; |
| |
| clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL, |
| &div->hw, &clk_divider_ops, |
| &gate->hw, &clk_gate_ops, 0); |
| if (IS_ERR(clk)) { |
| kfree(gate); |
| kfree(div); |
| } |
| |
| return clk; |
| } |
| |
| /* SDHI divisors */ |
| static const struct clk_div_table cpg_sdh_div_table[] = { |
| { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, |
| { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, |
| { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 }, |
| }; |
| |
| static const struct clk_div_table cpg_sd01_div_table[] = { |
| { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, |
| { 8, 24 }, { 10, 36 }, { 11, 48 }, { 12, 10 }, |
| { 0, 0 }, |
| }; |
| |
| static const struct rcar_gen2_cpg_pll_config *cpg_pll_config __initdata; |
| static unsigned int cpg_pll0_div __initdata; |
| static u32 cpg_mode __initdata; |
| static u32 cpg_quirks __initdata; |
| |
| #define SD_SKIP_FIRST BIT(0) /* Skip first clock in SD table */ |
| |
| static const struct soc_device_attribute cpg_quirks_match[] __initconst = { |
| { |
| .soc_id = "r8a77470", |
| .data = (void *)SD_SKIP_FIRST, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| struct clk * __init rcar_gen2_cpg_clk_register(struct device *dev, |
| const struct cpg_core_clk *core, const struct cpg_mssr_info *info, |
| struct clk **clks, void __iomem *base, |
| struct raw_notifier_head *notifiers) |
| { |
| const struct clk_div_table *table = NULL; |
| const struct clk *parent; |
| const char *parent_name; |
| unsigned int mult = 1; |
| unsigned int div = 1; |
| unsigned int shift; |
| |
| parent = clks[core->parent]; |
| if (IS_ERR(parent)) |
| return ERR_CAST(parent); |
| |
| parent_name = __clk_get_name(parent); |
| |
| switch (core->type) { |
| /* R-Car Gen2 */ |
| case CLK_TYPE_GEN2_MAIN: |
| div = cpg_pll_config->extal_div; |
| break; |
| |
| case CLK_TYPE_GEN2_PLL0: |
| /* |
| * PLL0 is a configurable multiplier clock except on R-Car |
| * V2H/E2. Register the PLL0 clock as a fixed factor clock for |
| * now as there's no generic multiplier clock implementation and |
| * we currently have no need to change the multiplier value. |
| */ |
| mult = cpg_pll_config->pll0_mult; |
| div = cpg_pll0_div; |
| if (!mult) { |
| u32 pll0cr = readl(base + CPG_PLL0CR); |
| |
| mult = (((pll0cr & CPG_PLL0CR_STC_MASK) >> |
| CPG_PLL0CR_STC_SHIFT) + 1) * 2; |
| } |
| break; |
| |
| case CLK_TYPE_GEN2_PLL1: |
| mult = cpg_pll_config->pll1_mult / 2; |
| break; |
| |
| case CLK_TYPE_GEN2_PLL3: |
| mult = cpg_pll_config->pll3_mult; |
| break; |
| |
| case CLK_TYPE_GEN2_Z: |
| return cpg_z_clk_register(core->name, parent_name, base); |
| |
| case CLK_TYPE_GEN2_LB: |
| div = cpg_mode & BIT(18) ? 36 : 24; |
| break; |
| |
| case CLK_TYPE_GEN2_ADSP: |
| return cpg_adsp_clk_register(core->name, parent_name, base); |
| |
| case CLK_TYPE_GEN2_SDH: |
| table = cpg_sdh_div_table; |
| shift = 8; |
| break; |
| |
| case CLK_TYPE_GEN2_SD0: |
| table = cpg_sd01_div_table; |
| if (cpg_quirks & SD_SKIP_FIRST) |
| table++; |
| |
| shift = 4; |
| break; |
| |
| case CLK_TYPE_GEN2_SD1: |
| table = cpg_sd01_div_table; |
| if (cpg_quirks & SD_SKIP_FIRST) |
| table++; |
| |
| shift = 0; |
| break; |
| |
| case CLK_TYPE_GEN2_QSPI: |
| div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2) ? |
| 8 : 10; |
| break; |
| |
| case CLK_TYPE_GEN2_RCAN: |
| return cpg_rcan_clk_register(core->name, parent_name, base); |
| |
| default: |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (!table) |
| return clk_register_fixed_factor(NULL, core->name, parent_name, |
| 0, mult, div); |
| else |
| return clk_register_divider_table(NULL, core->name, |
| parent_name, 0, |
| base + CPG_SDCKCR, shift, 4, |
| 0, table, &cpg_lock); |
| } |
| |
| int __init rcar_gen2_cpg_init(const struct rcar_gen2_cpg_pll_config *config, |
| unsigned int pll0_div, u32 mode) |
| { |
| const struct soc_device_attribute *attr; |
| |
| cpg_pll_config = config; |
| cpg_pll0_div = pll0_div; |
| cpg_mode = mode; |
| attr = soc_device_match(cpg_quirks_match); |
| if (attr) |
| cpg_quirks = (uintptr_t)attr->data; |
| pr_debug("%s: mode = 0x%x quirks = 0x%x\n", __func__, mode, cpg_quirks); |
| |
| spin_lock_init(&cpg_lock); |
| |
| return 0; |
| } |