| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2017 Broadcom |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/clk-provider.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| |
| #include <dt-bindings/clock/bcm-sr.h> |
| #include "clk-iproc.h" |
| |
| #define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, } |
| |
| #define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \ |
| .pwr_shift = ps, .iso_shift = is } |
| |
| #define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, } |
| |
| #define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \ |
| .p_reset_shift = prs } |
| |
| #define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \ |
| .ki_shift = kis, .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, \ |
| .ka_shift = kas, .ka_width = kaw } |
| |
| #define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo } |
| |
| #define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \ |
| .hold_shift = hs, .bypass_shift = bs } |
| |
| |
| static const struct iproc_pll_ctrl sr_genpll0 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | |
| IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 5, 1, 0), |
| .reset = RESET_VAL(0x0, 12, 11), |
| .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3), |
| .sw_ctrl = SW_CTRL_VAL(0x10, 31), |
| .ndiv_int = REG_VAL(0x10, 20, 10), |
| .ndiv_frac = REG_VAL(0x10, 0, 20), |
| .pdiv = REG_VAL(0x14, 0, 4), |
| .status = REG_VAL(0x30, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_genpll0_clk[] = { |
| [BCM_SR_GENPLL0_125M_CLK] = { |
| .channel = BCM_SR_GENPLL0_125M_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 6, 0, 12), |
| .mdiv = REG_VAL(0x18, 0, 9), |
| }, |
| [BCM_SR_GENPLL0_SCR_CLK] = { |
| .channel = BCM_SR_GENPLL0_SCR_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 7, 1, 13), |
| .mdiv = REG_VAL(0x18, 10, 9), |
| }, |
| [BCM_SR_GENPLL0_250M_CLK] = { |
| .channel = BCM_SR_GENPLL0_250M_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 8, 2, 14), |
| .mdiv = REG_VAL(0x18, 20, 9), |
| }, |
| [BCM_SR_GENPLL0_PCIE_AXI_CLK] = { |
| .channel = BCM_SR_GENPLL0_PCIE_AXI_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 9, 3, 15), |
| .mdiv = REG_VAL(0x1c, 0, 9), |
| }, |
| [BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = { |
| .channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 10, 4, 16), |
| .mdiv = REG_VAL(0x1c, 10, 9), |
| }, |
| [BCM_SR_GENPLL0_PAXC_AXI_CLK] = { |
| .channel = BCM_SR_GENPLL0_PAXC_AXI_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 11, 5, 17), |
| .mdiv = REG_VAL(0x1c, 20, 9), |
| }, |
| }; |
| |
| static int sr_genpll0_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_genpll0, NULL, 0, sr_genpll0_clk, |
| ARRAY_SIZE(sr_genpll0_clk)); |
| return 0; |
| } |
| |
| static const struct iproc_pll_ctrl sr_genpll2 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | |
| IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 1, 13, 12), |
| .reset = RESET_VAL(0x0, 12, 11), |
| .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3), |
| .sw_ctrl = SW_CTRL_VAL(0x10, 31), |
| .ndiv_int = REG_VAL(0x10, 20, 10), |
| .ndiv_frac = REG_VAL(0x10, 0, 20), |
| .pdiv = REG_VAL(0x14, 0, 4), |
| .status = REG_VAL(0x30, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_genpll2_clk[] = { |
| [BCM_SR_GENPLL2_NIC_CLK] = { |
| .channel = BCM_SR_GENPLL2_NIC_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 6, 0, 12), |
| .mdiv = REG_VAL(0x18, 0, 9), |
| }, |
| [BCM_SR_GENPLL2_TS_500_CLK] = { |
| .channel = BCM_SR_GENPLL2_TS_500_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 7, 1, 13), |
| .mdiv = REG_VAL(0x18, 10, 9), |
| }, |
| [BCM_SR_GENPLL2_125_NITRO_CLK] = { |
| .channel = BCM_SR_GENPLL2_125_NITRO_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 8, 2, 14), |
| .mdiv = REG_VAL(0x18, 20, 9), |
| }, |
| [BCM_SR_GENPLL2_CHIMP_CLK] = { |
| .channel = BCM_SR_GENPLL2_CHIMP_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 9, 3, 15), |
| .mdiv = REG_VAL(0x1c, 0, 9), |
| }, |
| [BCM_SR_GENPLL2_NIC_FLASH_CLK] = { |
| .channel = BCM_SR_GENPLL2_NIC_FLASH_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 10, 4, 16), |
| .mdiv = REG_VAL(0x1c, 10, 9), |
| }, |
| [BCM_SR_GENPLL2_FS4_CLK] = { |
| .channel = BCM_SR_GENPLL2_FS4_CLK, |
| .enable = ENABLE_VAL(0x4, 11, 5, 17), |
| .mdiv = REG_VAL(0x1c, 20, 9), |
| }, |
| }; |
| |
| static int sr_genpll2_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_genpll2, NULL, 0, sr_genpll2_clk, |
| ARRAY_SIZE(sr_genpll2_clk)); |
| return 0; |
| } |
| |
| static const struct iproc_pll_ctrl sr_genpll3 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | |
| IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 1, 19, 18), |
| .reset = RESET_VAL(0x0, 12, 11), |
| .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3), |
| .sw_ctrl = SW_CTRL_VAL(0x10, 31), |
| .ndiv_int = REG_VAL(0x10, 20, 10), |
| .ndiv_frac = REG_VAL(0x10, 0, 20), |
| .pdiv = REG_VAL(0x14, 0, 4), |
| .status = REG_VAL(0x30, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_genpll3_clk[] = { |
| [BCM_SR_GENPLL3_HSLS_CLK] = { |
| .channel = BCM_SR_GENPLL3_HSLS_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 6, 0, 12), |
| .mdiv = REG_VAL(0x18, 0, 9), |
| }, |
| [BCM_SR_GENPLL3_SDIO_CLK] = { |
| .channel = BCM_SR_GENPLL3_SDIO_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 7, 1, 13), |
| .mdiv = REG_VAL(0x18, 10, 9), |
| }, |
| }; |
| |
| static void sr_genpll3_clk_init(struct device_node *node) |
| { |
| iproc_pll_clk_setup(node, &sr_genpll3, NULL, 0, sr_genpll3_clk, |
| ARRAY_SIZE(sr_genpll3_clk)); |
| } |
| CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3", sr_genpll3_clk_init); |
| |
| static const struct iproc_pll_ctrl sr_genpll4 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | |
| IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 1, 25, 24), |
| .reset = RESET_VAL(0x0, 12, 11), |
| .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3), |
| .sw_ctrl = SW_CTRL_VAL(0x10, 31), |
| .ndiv_int = REG_VAL(0x10, 20, 10), |
| .ndiv_frac = REG_VAL(0x10, 0, 20), |
| .pdiv = REG_VAL(0x14, 0, 4), |
| .status = REG_VAL(0x30, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_genpll4_clk[] = { |
| [BCM_SR_GENPLL4_CCN_CLK] = { |
| .channel = BCM_SR_GENPLL4_CCN_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 6, 0, 12), |
| .mdiv = REG_VAL(0x18, 0, 9), |
| }, |
| [BCM_SR_GENPLL4_TPIU_PLL_CLK] = { |
| .channel = BCM_SR_GENPLL4_TPIU_PLL_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 7, 1, 13), |
| .mdiv = REG_VAL(0x18, 10, 9), |
| }, |
| [BCM_SR_GENPLL4_NOC_CLK] = { |
| .channel = BCM_SR_GENPLL4_NOC_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 8, 2, 14), |
| .mdiv = REG_VAL(0x18, 20, 9), |
| }, |
| [BCM_SR_GENPLL4_CHCLK_FS4_CLK] = { |
| .channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 9, 3, 15), |
| .mdiv = REG_VAL(0x1c, 0, 9), |
| }, |
| [BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = { |
| .channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x4, 10, 4, 16), |
| .mdiv = REG_VAL(0x1c, 10, 9), |
| }, |
| }; |
| |
| static int sr_genpll4_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_genpll4, NULL, 0, sr_genpll4_clk, |
| ARRAY_SIZE(sr_genpll4_clk)); |
| return 0; |
| } |
| |
| static const struct iproc_pll_ctrl sr_genpll5 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC | |
| IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 1, 1, 0), |
| .reset = RESET_VAL(0x0, 12, 11), |
| .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3), |
| .sw_ctrl = SW_CTRL_VAL(0x10, 31), |
| .ndiv_int = REG_VAL(0x10, 20, 10), |
| .ndiv_frac = REG_VAL(0x10, 0, 20), |
| .pdiv = REG_VAL(0x14, 0, 4), |
| .status = REG_VAL(0x30, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_genpll5_clk[] = { |
| [BCM_SR_GENPLL5_FS4_HF_CLK] = { |
| .channel = BCM_SR_GENPLL5_FS4_HF_CLK, |
| .enable = ENABLE_VAL(0x4, 6, 0, 12), |
| .mdiv = REG_VAL(0x18, 0, 9), |
| }, |
| [BCM_SR_GENPLL5_CRYPTO_AE_CLK] = { |
| .channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK, |
| .enable = ENABLE_VAL(0x4, 7, 1, 12), |
| .mdiv = REG_VAL(0x18, 10, 9), |
| }, |
| [BCM_SR_GENPLL5_RAID_AE_CLK] = { |
| .channel = BCM_SR_GENPLL5_RAID_AE_CLK, |
| .enable = ENABLE_VAL(0x4, 8, 2, 14), |
| .mdiv = REG_VAL(0x18, 20, 9), |
| }, |
| }; |
| |
| static int sr_genpll5_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_genpll5, NULL, 0, sr_genpll5_clk, |
| ARRAY_SIZE(sr_genpll5_clk)); |
| return 0; |
| } |
| |
| static const struct iproc_pll_ctrl sr_lcpll0 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 2, 19, 18), |
| .reset = RESET_VAL(0x0, 31, 30), |
| .sw_ctrl = SW_CTRL_VAL(0x4, 31), |
| .ndiv_int = REG_VAL(0x4, 16, 10), |
| .pdiv = REG_VAL(0x4, 26, 4), |
| .status = REG_VAL(0x38, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_lcpll0_clk[] = { |
| [BCM_SR_LCPLL0_SATA_REFP_CLK] = { |
| .channel = BCM_SR_LCPLL0_SATA_REFP_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 7, 1, 13), |
| .mdiv = REG_VAL(0x14, 0, 9), |
| }, |
| [BCM_SR_LCPLL0_SATA_REFN_CLK] = { |
| .channel = BCM_SR_LCPLL0_SATA_REFN_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 8, 2, 14), |
| .mdiv = REG_VAL(0x14, 10, 9), |
| }, |
| [BCM_SR_LCPLL0_SATA_350_CLK] = { |
| .channel = BCM_SR_LCPLL0_SATA_350_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 9, 3, 15), |
| .mdiv = REG_VAL(0x14, 20, 9), |
| }, |
| [BCM_SR_LCPLL0_SATA_500_CLK] = { |
| .channel = BCM_SR_LCPLL0_SATA_500_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 10, 4, 16), |
| .mdiv = REG_VAL(0x18, 0, 9), |
| }, |
| }; |
| |
| static int sr_lcpll0_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_lcpll0, NULL, 0, sr_lcpll0_clk, |
| ARRAY_SIZE(sr_lcpll0_clk)); |
| return 0; |
| } |
| |
| static const struct iproc_pll_ctrl sr_lcpll1 = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 2, 22, 21), |
| .reset = RESET_VAL(0x0, 31, 30), |
| .sw_ctrl = SW_CTRL_VAL(0x4, 31), |
| .ndiv_int = REG_VAL(0x4, 16, 10), |
| .pdiv = REG_VAL(0x4, 26, 4), |
| .status = REG_VAL(0x38, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_lcpll1_clk[] = { |
| [BCM_SR_LCPLL1_WAN_CLK] = { |
| .channel = BCM_SR_LCPLL1_WAN_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 7, 1, 13), |
| .mdiv = REG_VAL(0x14, 0, 9), |
| }, |
| [BCM_SR_LCPLL1_USB_REF_CLK] = { |
| .channel = BCM_SR_LCPLL1_USB_REF_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 8, 2, 14), |
| .mdiv = REG_VAL(0x14, 10, 9), |
| }, |
| [BCM_SR_LCPLL1_CRMU_TS_CLK] = { |
| .channel = BCM_SR_LCPLL1_CRMU_TS_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 9, 3, 15), |
| .mdiv = REG_VAL(0x14, 20, 9), |
| }, |
| }; |
| |
| static int sr_lcpll1_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_lcpll1, NULL, 0, sr_lcpll1_clk, |
| ARRAY_SIZE(sr_lcpll1_clk)); |
| return 0; |
| } |
| |
| static const struct iproc_pll_ctrl sr_lcpll_pcie = { |
| .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG, |
| .aon = AON_VAL(0x0, 2, 25, 24), |
| .reset = RESET_VAL(0x0, 31, 30), |
| .sw_ctrl = SW_CTRL_VAL(0x4, 31), |
| .ndiv_int = REG_VAL(0x4, 16, 10), |
| .pdiv = REG_VAL(0x4, 26, 4), |
| .status = REG_VAL(0x38, 12, 1), |
| }; |
| |
| static const struct iproc_clk_ctrl sr_lcpll_pcie_clk[] = { |
| [BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = { |
| .channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK, |
| .flags = IPROC_CLK_AON, |
| .enable = ENABLE_VAL(0x0, 7, 1, 13), |
| .mdiv = REG_VAL(0x14, 0, 9), |
| }, |
| }; |
| |
| static int sr_lcpll_pcie_clk_init(struct platform_device *pdev) |
| { |
| iproc_pll_clk_setup(pdev->dev.of_node, |
| &sr_lcpll_pcie, NULL, 0, sr_lcpll_pcie_clk, |
| ARRAY_SIZE(sr_lcpll_pcie_clk)); |
| return 0; |
| } |
| |
| static const struct of_device_id sr_clk_dt_ids[] = { |
| { .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init }, |
| { .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init }, |
| { .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init }, |
| { .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init }, |
| { .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init }, |
| { .compatible = "brcm,sr-lcpll1", .data = sr_lcpll1_clk_init }, |
| { .compatible = "brcm,sr-lcpll-pcie", .data = sr_lcpll_pcie_clk_init }, |
| { /* sentinel */ } |
| }; |
| |
| static int sr_clk_probe(struct platform_device *pdev) |
| { |
| int (*probe_func)(struct platform_device *); |
| |
| probe_func = of_device_get_match_data(&pdev->dev); |
| if (!probe_func) |
| return -ENODEV; |
| |
| return probe_func(pdev); |
| } |
| |
| static struct platform_driver sr_clk_driver = { |
| .driver = { |
| .name = "sr-clk", |
| .of_match_table = sr_clk_dt_ids, |
| }, |
| .probe = sr_clk_probe, |
| }; |
| builtin_platform_driver(sr_clk_driver); |