| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| drbd_actlog.c |
| |
| This file is part of DRBD by Philipp Reisner and Lars Ellenberg. |
| |
| Copyright (C) 2003-2008, LINBIT Information Technologies GmbH. |
| Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>. |
| Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>. |
| |
| |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/crc32c.h> |
| #include <linux/drbd.h> |
| #include <linux/drbd_limits.h> |
| #include "drbd_int.h" |
| |
| |
| enum al_transaction_types { |
| AL_TR_UPDATE = 0, |
| AL_TR_INITIALIZED = 0xffff |
| }; |
| /* all fields on disc in big endian */ |
| struct __packed al_transaction_on_disk { |
| /* don't we all like magic */ |
| __be32 magic; |
| |
| /* to identify the most recent transaction block |
| * in the on disk ring buffer */ |
| __be32 tr_number; |
| |
| /* checksum on the full 4k block, with this field set to 0. */ |
| __be32 crc32c; |
| |
| /* type of transaction, special transaction types like: |
| * purge-all, set-all-idle, set-all-active, ... to-be-defined |
| * see also enum al_transaction_types */ |
| __be16 transaction_type; |
| |
| /* we currently allow only a few thousand extents, |
| * so 16bit will be enough for the slot number. */ |
| |
| /* how many updates in this transaction */ |
| __be16 n_updates; |
| |
| /* maximum slot number, "al-extents" in drbd.conf speak. |
| * Having this in each transaction should make reconfiguration |
| * of that parameter easier. */ |
| __be16 context_size; |
| |
| /* slot number the context starts with */ |
| __be16 context_start_slot_nr; |
| |
| /* Some reserved bytes. Expected usage is a 64bit counter of |
| * sectors-written since device creation, and other data generation tag |
| * supporting usage */ |
| __be32 __reserved[4]; |
| |
| /* --- 36 byte used --- */ |
| |
| /* Reserve space for up to AL_UPDATES_PER_TRANSACTION changes |
| * in one transaction, then use the remaining byte in the 4k block for |
| * context information. "Flexible" number of updates per transaction |
| * does not help, as we have to account for the case when all update |
| * slots are used anyways, so it would only complicate code without |
| * additional benefit. |
| */ |
| __be16 update_slot_nr[AL_UPDATES_PER_TRANSACTION]; |
| |
| /* but the extent number is 32bit, which at an extent size of 4 MiB |
| * allows to cover device sizes of up to 2**54 Byte (16 PiB) */ |
| __be32 update_extent_nr[AL_UPDATES_PER_TRANSACTION]; |
| |
| /* --- 420 bytes used (36 + 64*6) --- */ |
| |
| /* 4096 - 420 = 3676 = 919 * 4 */ |
| __be32 context[AL_CONTEXT_PER_TRANSACTION]; |
| }; |
| |
| void *drbd_md_get_buffer(struct drbd_device *device, const char *intent) |
| { |
| int r; |
| |
| wait_event(device->misc_wait, |
| (r = atomic_cmpxchg(&device->md_io.in_use, 0, 1)) == 0 || |
| device->state.disk <= D_FAILED); |
| |
| if (r) |
| return NULL; |
| |
| device->md_io.current_use = intent; |
| device->md_io.start_jif = jiffies; |
| device->md_io.submit_jif = device->md_io.start_jif - 1; |
| return page_address(device->md_io.page); |
| } |
| |
| void drbd_md_put_buffer(struct drbd_device *device) |
| { |
| if (atomic_dec_and_test(&device->md_io.in_use)) |
| wake_up(&device->misc_wait); |
| } |
| |
| void wait_until_done_or_force_detached(struct drbd_device *device, struct drbd_backing_dev *bdev, |
| unsigned int *done) |
| { |
| long dt; |
| |
| rcu_read_lock(); |
| dt = rcu_dereference(bdev->disk_conf)->disk_timeout; |
| rcu_read_unlock(); |
| dt = dt * HZ / 10; |
| if (dt == 0) |
| dt = MAX_SCHEDULE_TIMEOUT; |
| |
| dt = wait_event_timeout(device->misc_wait, |
| *done || test_bit(FORCE_DETACH, &device->flags), dt); |
| if (dt == 0) { |
| drbd_err(device, "meta-data IO operation timed out\n"); |
| drbd_chk_io_error(device, 1, DRBD_FORCE_DETACH); |
| } |
| } |
| |
| static int _drbd_md_sync_page_io(struct drbd_device *device, |
| struct drbd_backing_dev *bdev, |
| sector_t sector, int op) |
| { |
| struct bio *bio; |
| /* we do all our meta data IO in aligned 4k blocks. */ |
| const int size = 4096; |
| int err, op_flags = 0; |
| |
| device->md_io.done = 0; |
| device->md_io.error = -ENODEV; |
| |
| if ((op == REQ_OP_WRITE) && !test_bit(MD_NO_FUA, &device->flags)) |
| op_flags |= REQ_FUA | REQ_PREFLUSH; |
| op_flags |= REQ_SYNC; |
| |
| bio = bio_alloc_drbd(GFP_NOIO); |
| bio_set_dev(bio, bdev->md_bdev); |
| bio->bi_iter.bi_sector = sector; |
| err = -EIO; |
| if (bio_add_page(bio, device->md_io.page, size, 0) != size) |
| goto out; |
| bio->bi_private = device; |
| bio->bi_end_io = drbd_md_endio; |
| bio_set_op_attrs(bio, op, op_flags); |
| |
| if (op != REQ_OP_WRITE && device->state.disk == D_DISKLESS && device->ldev == NULL) |
| /* special case, drbd_md_read() during drbd_adm_attach(): no get_ldev */ |
| ; |
| else if (!get_ldev_if_state(device, D_ATTACHING)) { |
| /* Corresponding put_ldev in drbd_md_endio() */ |
| drbd_err(device, "ASSERT FAILED: get_ldev_if_state() == 1 in _drbd_md_sync_page_io()\n"); |
| err = -ENODEV; |
| goto out; |
| } |
| |
| bio_get(bio); /* one bio_put() is in the completion handler */ |
| atomic_inc(&device->md_io.in_use); /* drbd_md_put_buffer() is in the completion handler */ |
| device->md_io.submit_jif = jiffies; |
| if (drbd_insert_fault(device, (op == REQ_OP_WRITE) ? DRBD_FAULT_MD_WR : DRBD_FAULT_MD_RD)) |
| bio_io_error(bio); |
| else |
| submit_bio(bio); |
| wait_until_done_or_force_detached(device, bdev, &device->md_io.done); |
| if (!bio->bi_status) |
| err = device->md_io.error; |
| |
| out: |
| bio_put(bio); |
| return err; |
| } |
| |
| int drbd_md_sync_page_io(struct drbd_device *device, struct drbd_backing_dev *bdev, |
| sector_t sector, int op) |
| { |
| int err; |
| D_ASSERT(device, atomic_read(&device->md_io.in_use) == 1); |
| |
| BUG_ON(!bdev->md_bdev); |
| |
| dynamic_drbd_dbg(device, "meta_data io: %s [%d]:%s(,%llus,%s) %pS\n", |
| current->comm, current->pid, __func__, |
| (unsigned long long)sector, (op == REQ_OP_WRITE) ? "WRITE" : "READ", |
| (void*)_RET_IP_ ); |
| |
| if (sector < drbd_md_first_sector(bdev) || |
| sector + 7 > drbd_md_last_sector(bdev)) |
| drbd_alert(device, "%s [%d]:%s(,%llus,%s) out of range md access!\n", |
| current->comm, current->pid, __func__, |
| (unsigned long long)sector, |
| (op == REQ_OP_WRITE) ? "WRITE" : "READ"); |
| |
| err = _drbd_md_sync_page_io(device, bdev, sector, op); |
| if (err) { |
| drbd_err(device, "drbd_md_sync_page_io(,%llus,%s) failed with error %d\n", |
| (unsigned long long)sector, |
| (op == REQ_OP_WRITE) ? "WRITE" : "READ", err); |
| } |
| return err; |
| } |
| |
| static struct bm_extent *find_active_resync_extent(struct drbd_device *device, unsigned int enr) |
| { |
| struct lc_element *tmp; |
| tmp = lc_find(device->resync, enr/AL_EXT_PER_BM_SECT); |
| if (unlikely(tmp != NULL)) { |
| struct bm_extent *bm_ext = lc_entry(tmp, struct bm_extent, lce); |
| if (test_bit(BME_NO_WRITES, &bm_ext->flags)) |
| return bm_ext; |
| } |
| return NULL; |
| } |
| |
| static struct lc_element *_al_get(struct drbd_device *device, unsigned int enr, bool nonblock) |
| { |
| struct lc_element *al_ext; |
| struct bm_extent *bm_ext; |
| int wake; |
| |
| spin_lock_irq(&device->al_lock); |
| bm_ext = find_active_resync_extent(device, enr); |
| if (bm_ext) { |
| wake = !test_and_set_bit(BME_PRIORITY, &bm_ext->flags); |
| spin_unlock_irq(&device->al_lock); |
| if (wake) |
| wake_up(&device->al_wait); |
| return NULL; |
| } |
| if (nonblock) |
| al_ext = lc_try_get(device->act_log, enr); |
| else |
| al_ext = lc_get(device->act_log, enr); |
| spin_unlock_irq(&device->al_lock); |
| return al_ext; |
| } |
| |
| bool drbd_al_begin_io_fastpath(struct drbd_device *device, struct drbd_interval *i) |
| { |
| /* for bios crossing activity log extent boundaries, |
| * we may need to activate two extents in one go */ |
| unsigned first = i->sector >> (AL_EXTENT_SHIFT-9); |
| unsigned last = i->size == 0 ? first : (i->sector + (i->size >> 9) - 1) >> (AL_EXTENT_SHIFT-9); |
| |
| D_ASSERT(device, first <= last); |
| D_ASSERT(device, atomic_read(&device->local_cnt) > 0); |
| |
| /* FIXME figure out a fast path for bios crossing AL extent boundaries */ |
| if (first != last) |
| return false; |
| |
| return _al_get(device, first, true); |
| } |
| |
| bool drbd_al_begin_io_prepare(struct drbd_device *device, struct drbd_interval *i) |
| { |
| /* for bios crossing activity log extent boundaries, |
| * we may need to activate two extents in one go */ |
| unsigned first = i->sector >> (AL_EXTENT_SHIFT-9); |
| unsigned last = i->size == 0 ? first : (i->sector + (i->size >> 9) - 1) >> (AL_EXTENT_SHIFT-9); |
| unsigned enr; |
| bool need_transaction = false; |
| |
| D_ASSERT(device, first <= last); |
| D_ASSERT(device, atomic_read(&device->local_cnt) > 0); |
| |
| for (enr = first; enr <= last; enr++) { |
| struct lc_element *al_ext; |
| wait_event(device->al_wait, |
| (al_ext = _al_get(device, enr, false)) != NULL); |
| if (al_ext->lc_number != enr) |
| need_transaction = true; |
| } |
| return need_transaction; |
| } |
| |
| #if (PAGE_SHIFT + 3) < (AL_EXTENT_SHIFT - BM_BLOCK_SHIFT) |
| /* Currently BM_BLOCK_SHIFT, BM_EXT_SHIFT and AL_EXTENT_SHIFT |
| * are still coupled, or assume too much about their relation. |
| * Code below will not work if this is violated. |
| * Will be cleaned up with some followup patch. |
| */ |
| # error FIXME |
| #endif |
| |
| static unsigned int al_extent_to_bm_page(unsigned int al_enr) |
| { |
| return al_enr >> |
| /* bit to page */ |
| ((PAGE_SHIFT + 3) - |
| /* al extent number to bit */ |
| (AL_EXTENT_SHIFT - BM_BLOCK_SHIFT)); |
| } |
| |
| static sector_t al_tr_number_to_on_disk_sector(struct drbd_device *device) |
| { |
| const unsigned int stripes = device->ldev->md.al_stripes; |
| const unsigned int stripe_size_4kB = device->ldev->md.al_stripe_size_4k; |
| |
| /* transaction number, modulo on-disk ring buffer wrap around */ |
| unsigned int t = device->al_tr_number % (device->ldev->md.al_size_4k); |
| |
| /* ... to aligned 4k on disk block */ |
| t = ((t % stripes) * stripe_size_4kB) + t/stripes; |
| |
| /* ... to 512 byte sector in activity log */ |
| t *= 8; |
| |
| /* ... plus offset to the on disk position */ |
| return device->ldev->md.md_offset + device->ldev->md.al_offset + t; |
| } |
| |
| static int __al_write_transaction(struct drbd_device *device, struct al_transaction_on_disk *buffer) |
| { |
| struct lc_element *e; |
| sector_t sector; |
| int i, mx; |
| unsigned extent_nr; |
| unsigned crc = 0; |
| int err = 0; |
| |
| memset(buffer, 0, sizeof(*buffer)); |
| buffer->magic = cpu_to_be32(DRBD_AL_MAGIC); |
| buffer->tr_number = cpu_to_be32(device->al_tr_number); |
| |
| i = 0; |
| |
| drbd_bm_reset_al_hints(device); |
| |
| /* Even though no one can start to change this list |
| * once we set the LC_LOCKED -- from drbd_al_begin_io(), |
| * lc_try_lock_for_transaction() --, someone may still |
| * be in the process of changing it. */ |
| spin_lock_irq(&device->al_lock); |
| list_for_each_entry(e, &device->act_log->to_be_changed, list) { |
| if (i == AL_UPDATES_PER_TRANSACTION) { |
| i++; |
| break; |
| } |
| buffer->update_slot_nr[i] = cpu_to_be16(e->lc_index); |
| buffer->update_extent_nr[i] = cpu_to_be32(e->lc_new_number); |
| if (e->lc_number != LC_FREE) |
| drbd_bm_mark_for_writeout(device, |
| al_extent_to_bm_page(e->lc_number)); |
| i++; |
| } |
| spin_unlock_irq(&device->al_lock); |
| BUG_ON(i > AL_UPDATES_PER_TRANSACTION); |
| |
| buffer->n_updates = cpu_to_be16(i); |
| for ( ; i < AL_UPDATES_PER_TRANSACTION; i++) { |
| buffer->update_slot_nr[i] = cpu_to_be16(-1); |
| buffer->update_extent_nr[i] = cpu_to_be32(LC_FREE); |
| } |
| |
| buffer->context_size = cpu_to_be16(device->act_log->nr_elements); |
| buffer->context_start_slot_nr = cpu_to_be16(device->al_tr_cycle); |
| |
| mx = min_t(int, AL_CONTEXT_PER_TRANSACTION, |
| device->act_log->nr_elements - device->al_tr_cycle); |
| for (i = 0; i < mx; i++) { |
| unsigned idx = device->al_tr_cycle + i; |
| extent_nr = lc_element_by_index(device->act_log, idx)->lc_number; |
| buffer->context[i] = cpu_to_be32(extent_nr); |
| } |
| for (; i < AL_CONTEXT_PER_TRANSACTION; i++) |
| buffer->context[i] = cpu_to_be32(LC_FREE); |
| |
| device->al_tr_cycle += AL_CONTEXT_PER_TRANSACTION; |
| if (device->al_tr_cycle >= device->act_log->nr_elements) |
| device->al_tr_cycle = 0; |
| |
| sector = al_tr_number_to_on_disk_sector(device); |
| |
| crc = crc32c(0, buffer, 4096); |
| buffer->crc32c = cpu_to_be32(crc); |
| |
| if (drbd_bm_write_hinted(device)) |
| err = -EIO; |
| else { |
| bool write_al_updates; |
| rcu_read_lock(); |
| write_al_updates = rcu_dereference(device->ldev->disk_conf)->al_updates; |
| rcu_read_unlock(); |
| if (write_al_updates) { |
| if (drbd_md_sync_page_io(device, device->ldev, sector, WRITE)) { |
| err = -EIO; |
| drbd_chk_io_error(device, 1, DRBD_META_IO_ERROR); |
| } else { |
| device->al_tr_number++; |
| device->al_writ_cnt++; |
| } |
| } |
| } |
| |
| return err; |
| } |
| |
| static int al_write_transaction(struct drbd_device *device) |
| { |
| struct al_transaction_on_disk *buffer; |
| int err; |
| |
| if (!get_ldev(device)) { |
| drbd_err(device, "disk is %s, cannot start al transaction\n", |
| drbd_disk_str(device->state.disk)); |
| return -EIO; |
| } |
| |
| /* The bitmap write may have failed, causing a state change. */ |
| if (device->state.disk < D_INCONSISTENT) { |
| drbd_err(device, |
| "disk is %s, cannot write al transaction\n", |
| drbd_disk_str(device->state.disk)); |
| put_ldev(device); |
| return -EIO; |
| } |
| |
| /* protects md_io_buffer, al_tr_cycle, ... */ |
| buffer = drbd_md_get_buffer(device, __func__); |
| if (!buffer) { |
| drbd_err(device, "disk failed while waiting for md_io buffer\n"); |
| put_ldev(device); |
| return -ENODEV; |
| } |
| |
| err = __al_write_transaction(device, buffer); |
| |
| drbd_md_put_buffer(device); |
| put_ldev(device); |
| |
| return err; |
| } |
| |
| |
| void drbd_al_begin_io_commit(struct drbd_device *device) |
| { |
| bool locked = false; |
| |
| /* Serialize multiple transactions. |
| * This uses test_and_set_bit, memory barrier is implicit. |
| */ |
| wait_event(device->al_wait, |
| device->act_log->pending_changes == 0 || |
| (locked = lc_try_lock_for_transaction(device->act_log))); |
| |
| if (locked) { |
| /* Double check: it may have been committed by someone else, |
| * while we have been waiting for the lock. */ |
| if (device->act_log->pending_changes) { |
| bool write_al_updates; |
| |
| rcu_read_lock(); |
| write_al_updates = rcu_dereference(device->ldev->disk_conf)->al_updates; |
| rcu_read_unlock(); |
| |
| if (write_al_updates) |
| al_write_transaction(device); |
| spin_lock_irq(&device->al_lock); |
| /* FIXME |
| if (err) |
| we need an "lc_cancel" here; |
| */ |
| lc_committed(device->act_log); |
| spin_unlock_irq(&device->al_lock); |
| } |
| lc_unlock(device->act_log); |
| wake_up(&device->al_wait); |
| } |
| } |
| |
| /* |
| * @delegate: delegate activity log I/O to the worker thread |
| */ |
| void drbd_al_begin_io(struct drbd_device *device, struct drbd_interval *i) |
| { |
| if (drbd_al_begin_io_prepare(device, i)) |
| drbd_al_begin_io_commit(device); |
| } |
| |
| int drbd_al_begin_io_nonblock(struct drbd_device *device, struct drbd_interval *i) |
| { |
| struct lru_cache *al = device->act_log; |
| /* for bios crossing activity log extent boundaries, |
| * we may need to activate two extents in one go */ |
| unsigned first = i->sector >> (AL_EXTENT_SHIFT-9); |
| unsigned last = i->size == 0 ? first : (i->sector + (i->size >> 9) - 1) >> (AL_EXTENT_SHIFT-9); |
| unsigned nr_al_extents; |
| unsigned available_update_slots; |
| unsigned enr; |
| |
| D_ASSERT(device, first <= last); |
| |
| nr_al_extents = 1 + last - first; /* worst case: all touched extends are cold. */ |
| available_update_slots = min(al->nr_elements - al->used, |
| al->max_pending_changes - al->pending_changes); |
| |
| /* We want all necessary updates for a given request within the same transaction |
| * We could first check how many updates are *actually* needed, |
| * and use that instead of the worst-case nr_al_extents */ |
| if (available_update_slots < nr_al_extents) { |
| /* Too many activity log extents are currently "hot". |
| * |
| * If we have accumulated pending changes already, |
| * we made progress. |
| * |
| * If we cannot get even a single pending change through, |
| * stop the fast path until we made some progress, |
| * or requests to "cold" extents could be starved. */ |
| if (!al->pending_changes) |
| __set_bit(__LC_STARVING, &device->act_log->flags); |
| return -ENOBUFS; |
| } |
| |
| /* Is resync active in this area? */ |
| for (enr = first; enr <= last; enr++) { |
| struct lc_element *tmp; |
| tmp = lc_find(device->resync, enr/AL_EXT_PER_BM_SECT); |
| if (unlikely(tmp != NULL)) { |
| struct bm_extent *bm_ext = lc_entry(tmp, struct bm_extent, lce); |
| if (test_bit(BME_NO_WRITES, &bm_ext->flags)) { |
| if (!test_and_set_bit(BME_PRIORITY, &bm_ext->flags)) |
| return -EBUSY; |
| return -EWOULDBLOCK; |
| } |
| } |
| } |
| |
| /* Checkout the refcounts. |
| * Given that we checked for available elements and update slots above, |
| * this has to be successful. */ |
| for (enr = first; enr <= last; enr++) { |
| struct lc_element *al_ext; |
| al_ext = lc_get_cumulative(device->act_log, enr); |
| if (!al_ext) |
| drbd_info(device, "LOGIC BUG for enr=%u\n", enr); |
| } |
| return 0; |
| } |
| |
| void drbd_al_complete_io(struct drbd_device *device, struct drbd_interval *i) |
| { |
| /* for bios crossing activity log extent boundaries, |
| * we may need to activate two extents in one go */ |
| unsigned first = i->sector >> (AL_EXTENT_SHIFT-9); |
| unsigned last = i->size == 0 ? first : (i->sector + (i->size >> 9) - 1) >> (AL_EXTENT_SHIFT-9); |
| unsigned enr; |
| struct lc_element *extent; |
| unsigned long flags; |
| |
| D_ASSERT(device, first <= last); |
| spin_lock_irqsave(&device->al_lock, flags); |
| |
| for (enr = first; enr <= last; enr++) { |
| extent = lc_find(device->act_log, enr); |
| if (!extent) { |
| drbd_err(device, "al_complete_io() called on inactive extent %u\n", enr); |
| continue; |
| } |
| lc_put(device->act_log, extent); |
| } |
| spin_unlock_irqrestore(&device->al_lock, flags); |
| wake_up(&device->al_wait); |
| } |
| |
| static int _try_lc_del(struct drbd_device *device, struct lc_element *al_ext) |
| { |
| int rv; |
| |
| spin_lock_irq(&device->al_lock); |
| rv = (al_ext->refcnt == 0); |
| if (likely(rv)) |
| lc_del(device->act_log, al_ext); |
| spin_unlock_irq(&device->al_lock); |
| |
| return rv; |
| } |
| |
| /** |
| * drbd_al_shrink() - Removes all active extents form the activity log |
| * @device: DRBD device. |
| * |
| * Removes all active extents form the activity log, waiting until |
| * the reference count of each entry dropped to 0 first, of course. |
| * |
| * You need to lock device->act_log with lc_try_lock() / lc_unlock() |
| */ |
| void drbd_al_shrink(struct drbd_device *device) |
| { |
| struct lc_element *al_ext; |
| int i; |
| |
| D_ASSERT(device, test_bit(__LC_LOCKED, &device->act_log->flags)); |
| |
| for (i = 0; i < device->act_log->nr_elements; i++) { |
| al_ext = lc_element_by_index(device->act_log, i); |
| if (al_ext->lc_number == LC_FREE) |
| continue; |
| wait_event(device->al_wait, _try_lc_del(device, al_ext)); |
| } |
| |
| wake_up(&device->al_wait); |
| } |
| |
| int drbd_al_initialize(struct drbd_device *device, void *buffer) |
| { |
| struct al_transaction_on_disk *al = buffer; |
| struct drbd_md *md = &device->ldev->md; |
| int al_size_4k = md->al_stripes * md->al_stripe_size_4k; |
| int i; |
| |
| __al_write_transaction(device, al); |
| /* There may or may not have been a pending transaction. */ |
| spin_lock_irq(&device->al_lock); |
| lc_committed(device->act_log); |
| spin_unlock_irq(&device->al_lock); |
| |
| /* The rest of the transactions will have an empty "updates" list, and |
| * are written out only to provide the context, and to initialize the |
| * on-disk ring buffer. */ |
| for (i = 1; i < al_size_4k; i++) { |
| int err = __al_write_transaction(device, al); |
| if (err) |
| return err; |
| } |
| return 0; |
| } |
| |
| static const char *drbd_change_sync_fname[] = { |
| [RECORD_RS_FAILED] = "drbd_rs_failed_io", |
| [SET_IN_SYNC] = "drbd_set_in_sync", |
| [SET_OUT_OF_SYNC] = "drbd_set_out_of_sync" |
| }; |
| |
| /* ATTENTION. The AL's extents are 4MB each, while the extents in the |
| * resync LRU-cache are 16MB each. |
| * The caller of this function has to hold an get_ldev() reference. |
| * |
| * Adjusts the caching members ->rs_left (success) or ->rs_failed (!success), |
| * potentially pulling in (and recounting the corresponding bits) |
| * this resync extent into the resync extent lru cache. |
| * |
| * Returns whether all bits have been cleared for this resync extent, |
| * precisely: (rs_left <= rs_failed) |
| * |
| * TODO will be obsoleted once we have a caching lru of the on disk bitmap |
| */ |
| static bool update_rs_extent(struct drbd_device *device, |
| unsigned int enr, int count, |
| enum update_sync_bits_mode mode) |
| { |
| struct lc_element *e; |
| |
| D_ASSERT(device, atomic_read(&device->local_cnt)); |
| |
| /* When setting out-of-sync bits, |
| * we don't need it cached (lc_find). |
| * But if it is present in the cache, |
| * we should update the cached bit count. |
| * Otherwise, that extent should be in the resync extent lru cache |
| * already -- or we want to pull it in if necessary -- (lc_get), |
| * then update and check rs_left and rs_failed. */ |
| if (mode == SET_OUT_OF_SYNC) |
| e = lc_find(device->resync, enr); |
| else |
| e = lc_get(device->resync, enr); |
| if (e) { |
| struct bm_extent *ext = lc_entry(e, struct bm_extent, lce); |
| if (ext->lce.lc_number == enr) { |
| if (mode == SET_IN_SYNC) |
| ext->rs_left -= count; |
| else if (mode == SET_OUT_OF_SYNC) |
| ext->rs_left += count; |
| else |
| ext->rs_failed += count; |
| if (ext->rs_left < ext->rs_failed) { |
| drbd_warn(device, "BAD! enr=%u rs_left=%d " |
| "rs_failed=%d count=%d cstate=%s\n", |
| ext->lce.lc_number, ext->rs_left, |
| ext->rs_failed, count, |
| drbd_conn_str(device->state.conn)); |
| |
| /* We don't expect to be able to clear more bits |
| * than have been set when we originally counted |
| * the set bits to cache that value in ext->rs_left. |
| * Whatever the reason (disconnect during resync, |
| * delayed local completion of an application write), |
| * try to fix it up by recounting here. */ |
| ext->rs_left = drbd_bm_e_weight(device, enr); |
| } |
| } else { |
| /* Normally this element should be in the cache, |
| * since drbd_rs_begin_io() pulled it already in. |
| * |
| * But maybe an application write finished, and we set |
| * something outside the resync lru_cache in sync. |
| */ |
| int rs_left = drbd_bm_e_weight(device, enr); |
| if (ext->flags != 0) { |
| drbd_warn(device, "changing resync lce: %d[%u;%02lx]" |
| " -> %d[%u;00]\n", |
| ext->lce.lc_number, ext->rs_left, |
| ext->flags, enr, rs_left); |
| ext->flags = 0; |
| } |
| if (ext->rs_failed) { |
| drbd_warn(device, "Kicking resync_lru element enr=%u " |
| "out with rs_failed=%d\n", |
| ext->lce.lc_number, ext->rs_failed); |
| } |
| ext->rs_left = rs_left; |
| ext->rs_failed = (mode == RECORD_RS_FAILED) ? count : 0; |
| /* we don't keep a persistent log of the resync lru, |
| * we can commit any change right away. */ |
| lc_committed(device->resync); |
| } |
| if (mode != SET_OUT_OF_SYNC) |
| lc_put(device->resync, &ext->lce); |
| /* no race, we are within the al_lock! */ |
| |
| if (ext->rs_left <= ext->rs_failed) { |
| ext->rs_failed = 0; |
| return true; |
| } |
| } else if (mode != SET_OUT_OF_SYNC) { |
| /* be quiet if lc_find() did not find it. */ |
| drbd_err(device, "lc_get() failed! locked=%d/%d flags=%lu\n", |
| device->resync_locked, |
| device->resync->nr_elements, |
| device->resync->flags); |
| } |
| return false; |
| } |
| |
| void drbd_advance_rs_marks(struct drbd_device *device, unsigned long still_to_go) |
| { |
| unsigned long now = jiffies; |
| unsigned long last = device->rs_mark_time[device->rs_last_mark]; |
| int next = (device->rs_last_mark + 1) % DRBD_SYNC_MARKS; |
| if (time_after_eq(now, last + DRBD_SYNC_MARK_STEP)) { |
| if (device->rs_mark_left[device->rs_last_mark] != still_to_go && |
| device->state.conn != C_PAUSED_SYNC_T && |
| device->state.conn != C_PAUSED_SYNC_S) { |
| device->rs_mark_time[next] = now; |
| device->rs_mark_left[next] = still_to_go; |
| device->rs_last_mark = next; |
| } |
| } |
| } |
| |
| /* It is called lazy update, so don't do write-out too often. */ |
| static bool lazy_bitmap_update_due(struct drbd_device *device) |
| { |
| return time_after(jiffies, device->rs_last_bcast + 2*HZ); |
| } |
| |
| static void maybe_schedule_on_disk_bitmap_update(struct drbd_device *device, bool rs_done) |
| { |
| if (rs_done) { |
| struct drbd_connection *connection = first_peer_device(device)->connection; |
| if (connection->agreed_pro_version <= 95 || |
| is_sync_target_state(device->state.conn)) |
| set_bit(RS_DONE, &device->flags); |
| /* and also set RS_PROGRESS below */ |
| |
| /* Else: rather wait for explicit notification via receive_state, |
| * to avoid uuids-rotated-too-fast causing full resync |
| * in next handshake, in case the replication link breaks |
| * at the most unfortunate time... */ |
| } else if (!lazy_bitmap_update_due(device)) |
| return; |
| |
| drbd_device_post_work(device, RS_PROGRESS); |
| } |
| |
| static int update_sync_bits(struct drbd_device *device, |
| unsigned long sbnr, unsigned long ebnr, |
| enum update_sync_bits_mode mode) |
| { |
| /* |
| * We keep a count of set bits per resync-extent in the ->rs_left |
| * caching member, so we need to loop and work within the resync extent |
| * alignment. Typically this loop will execute exactly once. |
| */ |
| unsigned long flags; |
| unsigned long count = 0; |
| unsigned int cleared = 0; |
| while (sbnr <= ebnr) { |
| /* set temporary boundary bit number to last bit number within |
| * the resync extent of the current start bit number, |
| * but cap at provided end bit number */ |
| unsigned long tbnr = min(ebnr, sbnr | BM_BLOCKS_PER_BM_EXT_MASK); |
| unsigned long c; |
| |
| if (mode == RECORD_RS_FAILED) |
| /* Only called from drbd_rs_failed_io(), bits |
| * supposedly still set. Recount, maybe some |
| * of the bits have been successfully cleared |
| * by application IO meanwhile. |
| */ |
| c = drbd_bm_count_bits(device, sbnr, tbnr); |
| else if (mode == SET_IN_SYNC) |
| c = drbd_bm_clear_bits(device, sbnr, tbnr); |
| else /* if (mode == SET_OUT_OF_SYNC) */ |
| c = drbd_bm_set_bits(device, sbnr, tbnr); |
| |
| if (c) { |
| spin_lock_irqsave(&device->al_lock, flags); |
| cleared += update_rs_extent(device, BM_BIT_TO_EXT(sbnr), c, mode); |
| spin_unlock_irqrestore(&device->al_lock, flags); |
| count += c; |
| } |
| sbnr = tbnr + 1; |
| } |
| if (count) { |
| if (mode == SET_IN_SYNC) { |
| unsigned long still_to_go = drbd_bm_total_weight(device); |
| bool rs_is_done = (still_to_go <= device->rs_failed); |
| drbd_advance_rs_marks(device, still_to_go); |
| if (cleared || rs_is_done) |
| maybe_schedule_on_disk_bitmap_update(device, rs_is_done); |
| } else if (mode == RECORD_RS_FAILED) |
| device->rs_failed += count; |
| wake_up(&device->al_wait); |
| } |
| return count; |
| } |
| |
| static bool plausible_request_size(int size) |
| { |
| return size > 0 |
| && size <= DRBD_MAX_BATCH_BIO_SIZE |
| && IS_ALIGNED(size, 512); |
| } |
| |
| /* clear the bit corresponding to the piece of storage in question: |
| * size byte of data starting from sector. Only clear a bits of the affected |
| * one ore more _aligned_ BM_BLOCK_SIZE blocks. |
| * |
| * called by worker on C_SYNC_TARGET and receiver on SyncSource. |
| * |
| */ |
| int __drbd_change_sync(struct drbd_device *device, sector_t sector, int size, |
| enum update_sync_bits_mode mode) |
| { |
| /* Is called from worker and receiver context _only_ */ |
| unsigned long sbnr, ebnr, lbnr; |
| unsigned long count = 0; |
| sector_t esector, nr_sectors; |
| |
| /* This would be an empty REQ_PREFLUSH, be silent. */ |
| if ((mode == SET_OUT_OF_SYNC) && size == 0) |
| return 0; |
| |
| if (!plausible_request_size(size)) { |
| drbd_err(device, "%s: sector=%llus size=%d nonsense!\n", |
| drbd_change_sync_fname[mode], |
| (unsigned long long)sector, size); |
| return 0; |
| } |
| |
| if (!get_ldev(device)) |
| return 0; /* no disk, no metadata, no bitmap to manipulate bits in */ |
| |
| nr_sectors = drbd_get_capacity(device->this_bdev); |
| esector = sector + (size >> 9) - 1; |
| |
| if (!expect(sector < nr_sectors)) |
| goto out; |
| if (!expect(esector < nr_sectors)) |
| esector = nr_sectors - 1; |
| |
| lbnr = BM_SECT_TO_BIT(nr_sectors-1); |
| |
| if (mode == SET_IN_SYNC) { |
| /* Round up start sector, round down end sector. We make sure |
| * we only clear full, aligned, BM_BLOCK_SIZE blocks. */ |
| if (unlikely(esector < BM_SECT_PER_BIT-1)) |
| goto out; |
| if (unlikely(esector == (nr_sectors-1))) |
| ebnr = lbnr; |
| else |
| ebnr = BM_SECT_TO_BIT(esector - (BM_SECT_PER_BIT-1)); |
| sbnr = BM_SECT_TO_BIT(sector + BM_SECT_PER_BIT-1); |
| } else { |
| /* We set it out of sync, or record resync failure. |
| * Should not round anything here. */ |
| sbnr = BM_SECT_TO_BIT(sector); |
| ebnr = BM_SECT_TO_BIT(esector); |
| } |
| |
| count = update_sync_bits(device, sbnr, ebnr, mode); |
| out: |
| put_ldev(device); |
| return count; |
| } |
| |
| static |
| struct bm_extent *_bme_get(struct drbd_device *device, unsigned int enr) |
| { |
| struct lc_element *e; |
| struct bm_extent *bm_ext; |
| int wakeup = 0; |
| unsigned long rs_flags; |
| |
| spin_lock_irq(&device->al_lock); |
| if (device->resync_locked > device->resync->nr_elements/2) { |
| spin_unlock_irq(&device->al_lock); |
| return NULL; |
| } |
| e = lc_get(device->resync, enr); |
| bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL; |
| if (bm_ext) { |
| if (bm_ext->lce.lc_number != enr) { |
| bm_ext->rs_left = drbd_bm_e_weight(device, enr); |
| bm_ext->rs_failed = 0; |
| lc_committed(device->resync); |
| wakeup = 1; |
| } |
| if (bm_ext->lce.refcnt == 1) |
| device->resync_locked++; |
| set_bit(BME_NO_WRITES, &bm_ext->flags); |
| } |
| rs_flags = device->resync->flags; |
| spin_unlock_irq(&device->al_lock); |
| if (wakeup) |
| wake_up(&device->al_wait); |
| |
| if (!bm_ext) { |
| if (rs_flags & LC_STARVING) |
| drbd_warn(device, "Have to wait for element" |
| " (resync LRU too small?)\n"); |
| BUG_ON(rs_flags & LC_LOCKED); |
| } |
| |
| return bm_ext; |
| } |
| |
| static int _is_in_al(struct drbd_device *device, unsigned int enr) |
| { |
| int rv; |
| |
| spin_lock_irq(&device->al_lock); |
| rv = lc_is_used(device->act_log, enr); |
| spin_unlock_irq(&device->al_lock); |
| |
| return rv; |
| } |
| |
| /** |
| * drbd_rs_begin_io() - Gets an extent in the resync LRU cache and sets it to BME_LOCKED |
| * @device: DRBD device. |
| * @sector: The sector number. |
| * |
| * This functions sleeps on al_wait. Returns 0 on success, -EINTR if interrupted. |
| */ |
| int drbd_rs_begin_io(struct drbd_device *device, sector_t sector) |
| { |
| unsigned int enr = BM_SECT_TO_EXT(sector); |
| struct bm_extent *bm_ext; |
| int i, sig; |
| bool sa; |
| |
| retry: |
| sig = wait_event_interruptible(device->al_wait, |
| (bm_ext = _bme_get(device, enr))); |
| if (sig) |
| return -EINTR; |
| |
| if (test_bit(BME_LOCKED, &bm_ext->flags)) |
| return 0; |
| |
| /* step aside only while we are above c-min-rate; unless disabled. */ |
| sa = drbd_rs_c_min_rate_throttle(device); |
| |
| for (i = 0; i < AL_EXT_PER_BM_SECT; i++) { |
| sig = wait_event_interruptible(device->al_wait, |
| !_is_in_al(device, enr * AL_EXT_PER_BM_SECT + i) || |
| (sa && test_bit(BME_PRIORITY, &bm_ext->flags))); |
| |
| if (sig || (sa && test_bit(BME_PRIORITY, &bm_ext->flags))) { |
| spin_lock_irq(&device->al_lock); |
| if (lc_put(device->resync, &bm_ext->lce) == 0) { |
| bm_ext->flags = 0; /* clears BME_NO_WRITES and eventually BME_PRIORITY */ |
| device->resync_locked--; |
| wake_up(&device->al_wait); |
| } |
| spin_unlock_irq(&device->al_lock); |
| if (sig) |
| return -EINTR; |
| if (schedule_timeout_interruptible(HZ/10)) |
| return -EINTR; |
| goto retry; |
| } |
| } |
| set_bit(BME_LOCKED, &bm_ext->flags); |
| return 0; |
| } |
| |
| /** |
| * drbd_try_rs_begin_io() - Gets an extent in the resync LRU cache, does not sleep |
| * @device: DRBD device. |
| * @sector: The sector number. |
| * |
| * Gets an extent in the resync LRU cache, sets it to BME_NO_WRITES, then |
| * tries to set it to BME_LOCKED. Returns 0 upon success, and -EAGAIN |
| * if there is still application IO going on in this area. |
| */ |
| int drbd_try_rs_begin_io(struct drbd_device *device, sector_t sector) |
| { |
| unsigned int enr = BM_SECT_TO_EXT(sector); |
| const unsigned int al_enr = enr*AL_EXT_PER_BM_SECT; |
| struct lc_element *e; |
| struct bm_extent *bm_ext; |
| int i; |
| bool throttle = drbd_rs_should_slow_down(device, sector, true); |
| |
| /* If we need to throttle, a half-locked (only marked BME_NO_WRITES, |
| * not yet BME_LOCKED) extent needs to be kicked out explicitly if we |
| * need to throttle. There is at most one such half-locked extent, |
| * which is remembered in resync_wenr. */ |
| |
| if (throttle && device->resync_wenr != enr) |
| return -EAGAIN; |
| |
| spin_lock_irq(&device->al_lock); |
| if (device->resync_wenr != LC_FREE && device->resync_wenr != enr) { |
| /* in case you have very heavy scattered io, it may |
| * stall the syncer undefined if we give up the ref count |
| * when we try again and requeue. |
| * |
| * if we don't give up the refcount, but the next time |
| * we are scheduled this extent has been "synced" by new |
| * application writes, we'd miss the lc_put on the |
| * extent we keep the refcount on. |
| * so we remembered which extent we had to try again, and |
| * if the next requested one is something else, we do |
| * the lc_put here... |
| * we also have to wake_up |
| */ |
| e = lc_find(device->resync, device->resync_wenr); |
| bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL; |
| if (bm_ext) { |
| D_ASSERT(device, !test_bit(BME_LOCKED, &bm_ext->flags)); |
| D_ASSERT(device, test_bit(BME_NO_WRITES, &bm_ext->flags)); |
| clear_bit(BME_NO_WRITES, &bm_ext->flags); |
| device->resync_wenr = LC_FREE; |
| if (lc_put(device->resync, &bm_ext->lce) == 0) { |
| bm_ext->flags = 0; |
| device->resync_locked--; |
| } |
| wake_up(&device->al_wait); |
| } else { |
| drbd_alert(device, "LOGIC BUG\n"); |
| } |
| } |
| /* TRY. */ |
| e = lc_try_get(device->resync, enr); |
| bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL; |
| if (bm_ext) { |
| if (test_bit(BME_LOCKED, &bm_ext->flags)) |
| goto proceed; |
| if (!test_and_set_bit(BME_NO_WRITES, &bm_ext->flags)) { |
| device->resync_locked++; |
| } else { |
| /* we did set the BME_NO_WRITES, |
| * but then could not set BME_LOCKED, |
| * so we tried again. |
| * drop the extra reference. */ |
| bm_ext->lce.refcnt--; |
| D_ASSERT(device, bm_ext->lce.refcnt > 0); |
| } |
| goto check_al; |
| } else { |
| /* do we rather want to try later? */ |
| if (device->resync_locked > device->resync->nr_elements-3) |
| goto try_again; |
| /* Do or do not. There is no try. -- Yoda */ |
| e = lc_get(device->resync, enr); |
| bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL; |
| if (!bm_ext) { |
| const unsigned long rs_flags = device->resync->flags; |
| if (rs_flags & LC_STARVING) |
| drbd_warn(device, "Have to wait for element" |
| " (resync LRU too small?)\n"); |
| BUG_ON(rs_flags & LC_LOCKED); |
| goto try_again; |
| } |
| if (bm_ext->lce.lc_number != enr) { |
| bm_ext->rs_left = drbd_bm_e_weight(device, enr); |
| bm_ext->rs_failed = 0; |
| lc_committed(device->resync); |
| wake_up(&device->al_wait); |
| D_ASSERT(device, test_bit(BME_LOCKED, &bm_ext->flags) == 0); |
| } |
| set_bit(BME_NO_WRITES, &bm_ext->flags); |
| D_ASSERT(device, bm_ext->lce.refcnt == 1); |
| device->resync_locked++; |
| goto check_al; |
| } |
| check_al: |
| for (i = 0; i < AL_EXT_PER_BM_SECT; i++) { |
| if (lc_is_used(device->act_log, al_enr+i)) |
| goto try_again; |
| } |
| set_bit(BME_LOCKED, &bm_ext->flags); |
| proceed: |
| device->resync_wenr = LC_FREE; |
| spin_unlock_irq(&device->al_lock); |
| return 0; |
| |
| try_again: |
| if (bm_ext) { |
| if (throttle) { |
| D_ASSERT(device, !test_bit(BME_LOCKED, &bm_ext->flags)); |
| D_ASSERT(device, test_bit(BME_NO_WRITES, &bm_ext->flags)); |
| clear_bit(BME_NO_WRITES, &bm_ext->flags); |
| device->resync_wenr = LC_FREE; |
| if (lc_put(device->resync, &bm_ext->lce) == 0) { |
| bm_ext->flags = 0; |
| device->resync_locked--; |
| } |
| wake_up(&device->al_wait); |
| } else |
| device->resync_wenr = enr; |
| } |
| spin_unlock_irq(&device->al_lock); |
| return -EAGAIN; |
| } |
| |
| void drbd_rs_complete_io(struct drbd_device *device, sector_t sector) |
| { |
| unsigned int enr = BM_SECT_TO_EXT(sector); |
| struct lc_element *e; |
| struct bm_extent *bm_ext; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&device->al_lock, flags); |
| e = lc_find(device->resync, enr); |
| bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL; |
| if (!bm_ext) { |
| spin_unlock_irqrestore(&device->al_lock, flags); |
| if (__ratelimit(&drbd_ratelimit_state)) |
| drbd_err(device, "drbd_rs_complete_io() called, but extent not found\n"); |
| return; |
| } |
| |
| if (bm_ext->lce.refcnt == 0) { |
| spin_unlock_irqrestore(&device->al_lock, flags); |
| drbd_err(device, "drbd_rs_complete_io(,%llu [=%u]) called, " |
| "but refcnt is 0!?\n", |
| (unsigned long long)sector, enr); |
| return; |
| } |
| |
| if (lc_put(device->resync, &bm_ext->lce) == 0) { |
| bm_ext->flags = 0; /* clear BME_LOCKED, BME_NO_WRITES and BME_PRIORITY */ |
| device->resync_locked--; |
| wake_up(&device->al_wait); |
| } |
| |
| spin_unlock_irqrestore(&device->al_lock, flags); |
| } |
| |
| /** |
| * drbd_rs_cancel_all() - Removes all extents from the resync LRU (even BME_LOCKED) |
| * @device: DRBD device. |
| */ |
| void drbd_rs_cancel_all(struct drbd_device *device) |
| { |
| spin_lock_irq(&device->al_lock); |
| |
| if (get_ldev_if_state(device, D_FAILED)) { /* Makes sure ->resync is there. */ |
| lc_reset(device->resync); |
| put_ldev(device); |
| } |
| device->resync_locked = 0; |
| device->resync_wenr = LC_FREE; |
| spin_unlock_irq(&device->al_lock); |
| wake_up(&device->al_wait); |
| } |
| |
| /** |
| * drbd_rs_del_all() - Gracefully remove all extents from the resync LRU |
| * @device: DRBD device. |
| * |
| * Returns 0 upon success, -EAGAIN if at least one reference count was |
| * not zero. |
| */ |
| int drbd_rs_del_all(struct drbd_device *device) |
| { |
| struct lc_element *e; |
| struct bm_extent *bm_ext; |
| int i; |
| |
| spin_lock_irq(&device->al_lock); |
| |
| if (get_ldev_if_state(device, D_FAILED)) { |
| /* ok, ->resync is there. */ |
| for (i = 0; i < device->resync->nr_elements; i++) { |
| e = lc_element_by_index(device->resync, i); |
| bm_ext = lc_entry(e, struct bm_extent, lce); |
| if (bm_ext->lce.lc_number == LC_FREE) |
| continue; |
| if (bm_ext->lce.lc_number == device->resync_wenr) { |
| drbd_info(device, "dropping %u in drbd_rs_del_all, apparently" |
| " got 'synced' by application io\n", |
| device->resync_wenr); |
| D_ASSERT(device, !test_bit(BME_LOCKED, &bm_ext->flags)); |
| D_ASSERT(device, test_bit(BME_NO_WRITES, &bm_ext->flags)); |
| clear_bit(BME_NO_WRITES, &bm_ext->flags); |
| device->resync_wenr = LC_FREE; |
| lc_put(device->resync, &bm_ext->lce); |
| } |
| if (bm_ext->lce.refcnt != 0) { |
| drbd_info(device, "Retrying drbd_rs_del_all() later. " |
| "refcnt=%d\n", bm_ext->lce.refcnt); |
| put_ldev(device); |
| spin_unlock_irq(&device->al_lock); |
| return -EAGAIN; |
| } |
| D_ASSERT(device, !test_bit(BME_LOCKED, &bm_ext->flags)); |
| D_ASSERT(device, !test_bit(BME_NO_WRITES, &bm_ext->flags)); |
| lc_del(device->resync, &bm_ext->lce); |
| } |
| D_ASSERT(device, device->resync->used == 0); |
| put_ldev(device); |
| } |
| spin_unlock_irq(&device->al_lock); |
| wake_up(&device->al_wait); |
| |
| return 0; |
| } |