| Kernel driver max20751 |
| ====================== |
| |
| Supported chips: |
| |
| * maxim MAX20751 |
| |
| Prefix: 'max20751' |
| |
| Addresses scanned: - |
| |
| Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf |
| |
| Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf |
| |
| Author: Guenter Roeck <linux@roeck-us.net> |
| |
| |
| Description |
| ----------- |
| |
| This driver supports MAX20751 Multiphase Master with PMBus Interface |
| and Internal Buck Converter. |
| |
| The driver is a client driver to the core PMBus driver. |
| Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. |
| |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices for |
| details. |
| |
| |
| Platform data support |
| --------------------- |
| |
| The driver supports standard PMBus driver platform data. |
| |
| |
| Sysfs entries |
| ------------- |
| |
| The following attributes are supported. |
| |
| ======================= ======================================================= |
| in1_label "vin1" |
| in1_input Measured voltage. |
| in1_min Minimum input voltage. |
| in1_max Maximum input voltage. |
| in1_lcrit Critical minimum input voltage. |
| in1_crit Critical maximum input voltage. |
| in1_min_alarm Input voltage low alarm. |
| in1_lcrit_alarm Input voltage critical low alarm. |
| in1_min_alarm Input voltage low alarm. |
| in1_max_alarm Input voltage high alarm. |
| |
| in2_label "vout1" |
| in2_input Measured voltage. |
| in2_min Minimum output voltage. |
| in2_max Maximum output voltage. |
| in2_lcrit Critical minimum output voltage. |
| in2_crit Critical maximum output voltage. |
| in2_min_alarm Output voltage low alarm. |
| in2_lcrit_alarm Output voltage critical low alarm. |
| in2_min_alarm Output voltage low alarm. |
| in2_max_alarm Output voltage high alarm. |
| |
| curr1_input Measured output current. |
| curr1_label "iout1" |
| curr1_max Maximum output current. |
| curr1_alarm Current high alarm. |
| |
| temp1_input Measured temperature. |
| temp1_max Maximum temperature. |
| temp1_crit Critical high temperature. |
| temp1_max_alarm Chip temperature high alarm. |
| temp1_crit_alarm Chip temperature critical high alarm. |
| |
| power1_input Output power. |
| power1_label "pout1" |
| ======================= ======================================================= |
