| /* |
| * Renesas USB driver |
| * |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include "./common.h" |
| #include "./pipe.h" |
| |
| /* |
| * packet info function |
| */ |
| void usbhs_pkt_update(struct usbhs_pkt *pkt, |
| struct usbhs_pipe *pipe, |
| void *buf, int len) |
| { |
| pkt->pipe = pipe; |
| pkt->buf = buf; |
| pkt->length = len; |
| pkt->actual = 0; |
| pkt->maxp = 0; |
| } |
| |
| /* |
| * FIFO ctrl |
| */ |
| static void usbhsf_send_terminator(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| |
| usbhs_bset(priv, CFIFOCTR, BVAL, BVAL); |
| } |
| |
| static int usbhsf_fifo_barrier(struct usbhs_priv *priv) |
| { |
| int timeout = 1024; |
| |
| do { |
| /* The FIFO port is accessible */ |
| if (usbhs_read(priv, CFIFOCTR) & FRDY) |
| return 0; |
| |
| udelay(10); |
| } while (timeout--); |
| |
| return -EBUSY; |
| } |
| |
| static void usbhsf_fifo_clear(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| |
| if (!usbhs_pipe_is_dcp(pipe)) |
| usbhsf_fifo_barrier(priv); |
| |
| usbhs_write(priv, CFIFOCTR, BCLR); |
| } |
| |
| static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv) |
| { |
| return usbhs_read(priv, CFIFOCTR) & DTLN_MASK; |
| } |
| |
| static int usbhsf_fifo_select(struct usbhs_pipe *pipe, int write) |
| { |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int timeout = 1024; |
| u16 mask = ((1 << 5) | 0xF); /* mask of ISEL | CURPIPE */ |
| u16 base = usbhs_pipe_number(pipe); /* CURPIPE */ |
| |
| if (usbhs_pipe_is_dcp(pipe)) |
| base |= (1 == write) << 5; /* ISEL */ |
| |
| /* "base" will be used below */ |
| usbhs_write(priv, CFIFOSEL, base | MBW_32); |
| |
| /* check ISEL and CURPIPE value */ |
| while (timeout--) { |
| if (base == (mask & usbhs_read(priv, CFIFOSEL))) |
| return 0; |
| udelay(10); |
| } |
| |
| dev_err(dev, "fifo select error\n"); |
| |
| return -EIO; |
| } |
| |
| /* |
| * PIO fifo functions |
| */ |
| int usbhs_fifo_prepare_write(struct usbhs_pipe *pipe) |
| { |
| return usbhsf_fifo_select(pipe, 1); |
| } |
| |
| int usbhs_fifo_write(struct usbhs_pkt *pkt) |
| { |
| struct usbhs_pipe *pipe = pkt->pipe; |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); |
| void __iomem *addr = priv->base + CFIFO; |
| int maxp = usbhs_pipe_get_maxpacket(pipe); |
| int total_len; |
| u8 *buf = pkt->buf; |
| int i, ret, len; |
| |
| ret = usbhs_pipe_is_accessible(pipe); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhsf_fifo_select(pipe, 1); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhsf_fifo_barrier(priv); |
| if (ret < 0) |
| return ret; |
| |
| len = min(pkt->length, maxp); |
| total_len = len; |
| |
| /* |
| * FIXME |
| * |
| * 32-bit access only |
| */ |
| if (len >= 4 && |
| !((unsigned long)buf & 0x03)) { |
| iowrite32_rep(addr, buf, len / 4); |
| len %= 4; |
| buf += total_len - len; |
| } |
| |
| /* the rest operation */ |
| for (i = 0; i < len; i++) |
| iowrite8(buf[i], addr + (0x03 - (i & 0x03))); |
| |
| if (total_len < maxp) |
| usbhsf_send_terminator(pipe); |
| |
| usbhs_pipe_enable(pipe); |
| |
| /* update pkt */ |
| if (info->tx_done) { |
| pkt->actual = total_len; |
| pkt->maxp = maxp; |
| info->tx_done(pkt); |
| } |
| |
| return 0; |
| } |
| |
| int usbhs_fifo_prepare_read(struct usbhs_pipe *pipe) |
| { |
| int ret; |
| |
| /* |
| * select pipe and enable it to prepare packet receive |
| */ |
| ret = usbhsf_fifo_select(pipe, 0); |
| if (ret < 0) |
| return ret; |
| |
| usbhs_pipe_enable(pipe); |
| |
| return ret; |
| } |
| |
| int usbhs_fifo_read(struct usbhs_pkt *pkt) |
| { |
| struct usbhs_pipe *pipe = pkt->pipe; |
| struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); |
| struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); |
| void __iomem *addr = priv->base + CFIFO; |
| u8 *buf = pkt->buf; |
| int rcv_len, len; |
| int i, ret; |
| int total_len = 0; |
| u32 data = 0; |
| |
| ret = usbhsf_fifo_select(pipe, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhsf_fifo_barrier(priv); |
| if (ret < 0) |
| return ret; |
| |
| rcv_len = usbhsf_fifo_rcv_len(priv); |
| |
| /* |
| * Buffer clear if Zero-Length packet |
| * |
| * see |
| * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function" |
| */ |
| if (0 == rcv_len) { |
| usbhsf_fifo_clear(pipe); |
| goto usbhs_fifo_read_end; |
| } |
| |
| len = min(rcv_len, pkt->length); |
| total_len = len; |
| |
| /* |
| * FIXME |
| * |
| * 32-bit access only |
| */ |
| if (len >= 4 && |
| !((unsigned long)buf & 0x03)) { |
| ioread32_rep(addr, buf, len / 4); |
| len %= 4; |
| buf += rcv_len - len; |
| } |
| |
| /* the rest operation */ |
| for (i = 0; i < len; i++) { |
| if (!(i & 0x03)) |
| data = ioread32(addr); |
| |
| buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; |
| } |
| |
| usbhs_fifo_read_end: |
| if (info->rx_done) { |
| /* update pkt */ |
| pkt->actual = total_len; |
| pkt->maxp = usbhs_pipe_get_maxpacket(pipe); |
| info->rx_done(pkt); |
| } |
| |
| return 0; |
| } |