| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Spreadtrum Communications Inc. |
| * Copyright (C) 2018 Linaro Ltd. |
| */ |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| /* EIC registers definition */ |
| #define SPRD_PMIC_EIC_DATA 0x0 |
| #define SPRD_PMIC_EIC_DMSK 0x4 |
| #define SPRD_PMIC_EIC_IEV 0x14 |
| #define SPRD_PMIC_EIC_IE 0x18 |
| #define SPRD_PMIC_EIC_RIS 0x1c |
| #define SPRD_PMIC_EIC_MIS 0x20 |
| #define SPRD_PMIC_EIC_IC 0x24 |
| #define SPRD_PMIC_EIC_TRIG 0x28 |
| #define SPRD_PMIC_EIC_CTRL0 0x40 |
| |
| /* |
| * The PMIC EIC controller only has one bank, and each bank now can contain |
| * 16 EICs. |
| */ |
| #define SPRD_PMIC_EIC_PER_BANK_NR 16 |
| #define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR |
| #define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0) |
| #define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1)) |
| #define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0) |
| |
| /* |
| * These registers are modified under the irq bus lock and cached to avoid |
| * unnecessary writes in bus_sync_unlock. |
| */ |
| enum { |
| REG_IEV, |
| REG_IE, |
| REG_TRIG, |
| CACHE_NR_REGS |
| }; |
| |
| /** |
| * struct sprd_pmic_eic - PMIC EIC controller |
| * @chip: the gpio_chip structure. |
| * @intc: the irq_chip structure. |
| * @regmap: the regmap from the parent device. |
| * @offset: the EIC controller's offset address of the PMIC. |
| * @reg: the array to cache the EIC registers. |
| * @buslock: for bus lock/sync and unlock. |
| * @irq: the interrupt number of the PMIC EIC conteroller. |
| */ |
| struct sprd_pmic_eic { |
| struct gpio_chip chip; |
| struct irq_chip intc; |
| struct regmap *map; |
| u32 offset; |
| u8 reg[CACHE_NR_REGS]; |
| struct mutex buslock; |
| int irq; |
| }; |
| |
| static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset, |
| u16 reg, unsigned int val) |
| { |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| u32 shift = SPRD_PMIC_EIC_BIT(offset); |
| |
| regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg, |
| BIT(shift), val << shift); |
| } |
| |
| static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset, |
| u16 reg) |
| { |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| u32 value; |
| int ret; |
| |
| ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); |
| if (ret) |
| return ret; |
| |
| return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset))); |
| } |
| |
| static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset) |
| { |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1); |
| return 0; |
| } |
| |
| static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset) |
| { |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0); |
| } |
| |
| static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA); |
| } |
| |
| static int sprd_pmic_eic_direction_input(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| /* EICs are always input, nothing need to do here. */ |
| return 0; |
| } |
| |
| static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset, |
| int value) |
| { |
| /* EICs are always input, nothing need to do here. */ |
| } |
| |
| static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip, |
| unsigned int offset, |
| unsigned int debounce) |
| { |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| u32 reg, value; |
| int ret; |
| |
| reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4; |
| ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); |
| if (ret) |
| return ret; |
| |
| value &= ~SPRD_PMIC_EIC_DBNC_MASK; |
| value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK; |
| return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value); |
| } |
| |
| static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset, |
| unsigned long config) |
| { |
| unsigned long param = pinconf_to_config_param(config); |
| u32 arg = pinconf_to_config_argument(config); |
| |
| if (param == PIN_CONFIG_INPUT_DEBOUNCE) |
| return sprd_pmic_eic_set_debounce(chip, offset, arg); |
| |
| return -ENOTSUPP; |
| } |
| |
| static void sprd_pmic_eic_irq_mask(struct irq_data *data) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| |
| pmic_eic->reg[REG_IE] = 0; |
| pmic_eic->reg[REG_TRIG] = 0; |
| } |
| |
| static void sprd_pmic_eic_irq_unmask(struct irq_data *data) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| |
| pmic_eic->reg[REG_IE] = 1; |
| pmic_eic->reg[REG_TRIG] = 1; |
| } |
| |
| static int sprd_pmic_eic_irq_set_type(struct irq_data *data, |
| unsigned int flow_type) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| |
| switch (flow_type) { |
| case IRQ_TYPE_LEVEL_HIGH: |
| pmic_eic->reg[REG_IEV] = 1; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| pmic_eic->reg[REG_IEV] = 0; |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| case IRQ_TYPE_EDGE_FALLING: |
| case IRQ_TYPE_EDGE_BOTH: |
| /* |
| * Will set the trigger level according to current EIC level |
| * in irq_bus_sync_unlock() interface, so here nothing to do. |
| */ |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static void sprd_pmic_eic_bus_lock(struct irq_data *data) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| |
| mutex_lock(&pmic_eic->buslock); |
| } |
| |
| static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data) |
| { |
| struct gpio_chip *chip = irq_data_get_irq_chip_data(data); |
| struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); |
| u32 trigger = irqd_get_trigger_type(data); |
| u32 offset = irqd_to_hwirq(data); |
| int state; |
| |
| /* Set irq type */ |
| if (trigger & IRQ_TYPE_EDGE_BOTH) { |
| state = sprd_pmic_eic_get(chip, offset); |
| if (state) |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0); |
| else |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1); |
| } else { |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, |
| pmic_eic->reg[REG_IEV]); |
| } |
| |
| /* Set irq unmask */ |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, |
| pmic_eic->reg[REG_IE]); |
| /* Generate trigger start pulse for debounce EIC */ |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, |
| pmic_eic->reg[REG_TRIG]); |
| |
| mutex_unlock(&pmic_eic->buslock); |
| } |
| |
| static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip, |
| unsigned int irq, unsigned int offset) |
| { |
| u32 trigger = irq_get_trigger_type(irq); |
| int state, post_state; |
| |
| if (!(trigger & IRQ_TYPE_EDGE_BOTH)) |
| return; |
| |
| state = sprd_pmic_eic_get(chip, offset); |
| retry: |
| if (state) |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0); |
| else |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1); |
| |
| post_state = sprd_pmic_eic_get(chip, offset); |
| if (state != post_state) { |
| dev_warn(chip->parent, "PMIC EIC level was changed.\n"); |
| state = post_state; |
| goto retry; |
| } |
| |
| /* Set irq unmask */ |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1); |
| /* Generate trigger start pulse for debounce EIC */ |
| sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1); |
| } |
| |
| static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data) |
| { |
| struct sprd_pmic_eic *pmic_eic = data; |
| struct gpio_chip *chip = &pmic_eic->chip; |
| unsigned long status; |
| u32 n, girq, val; |
| int ret; |
| |
| ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS, |
| &val); |
| if (ret) |
| return IRQ_RETVAL(ret); |
| |
| status = val & SPRD_PMIC_EIC_DATA_MASK; |
| |
| for_each_set_bit(n, &status, chip->ngpio) { |
| /* Clear the interrupt */ |
| sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1); |
| |
| girq = irq_find_mapping(chip->irq.domain, n); |
| handle_nested_irq(girq); |
| |
| /* |
| * The PMIC EIC can only support level trigger, so we can |
| * toggle the level trigger to emulate the edge trigger. |
| */ |
| sprd_pmic_eic_toggle_trigger(chip, girq, n); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sprd_pmic_eic_probe(struct platform_device *pdev) |
| { |
| struct gpio_irq_chip *irq; |
| struct sprd_pmic_eic *pmic_eic; |
| int ret; |
| |
| pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL); |
| if (!pmic_eic) |
| return -ENOMEM; |
| |
| mutex_init(&pmic_eic->buslock); |
| |
| pmic_eic->irq = platform_get_irq(pdev, 0); |
| if (pmic_eic->irq < 0) { |
| dev_err(&pdev->dev, "Failed to get PMIC EIC interrupt.\n"); |
| return pmic_eic->irq; |
| } |
| |
| pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!pmic_eic->map) |
| return -ENODEV; |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n"); |
| return ret; |
| } |
| |
| ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL, |
| sprd_pmic_eic_irq_handler, |
| IRQF_TRIGGER_LOW | |
| IRQF_ONESHOT | IRQF_NO_SUSPEND, |
| dev_name(&pdev->dev), pmic_eic); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n"); |
| return ret; |
| } |
| |
| pmic_eic->chip.label = dev_name(&pdev->dev); |
| pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR; |
| pmic_eic->chip.base = -1; |
| pmic_eic->chip.parent = &pdev->dev; |
| pmic_eic->chip.of_node = pdev->dev.of_node; |
| pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input; |
| pmic_eic->chip.request = sprd_pmic_eic_request; |
| pmic_eic->chip.free = sprd_pmic_eic_free; |
| pmic_eic->chip.set_config = sprd_pmic_eic_set_config; |
| pmic_eic->chip.set = sprd_pmic_eic_set; |
| pmic_eic->chip.get = sprd_pmic_eic_get; |
| |
| pmic_eic->intc.name = dev_name(&pdev->dev); |
| pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask; |
| pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask; |
| pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type; |
| pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock; |
| pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock; |
| pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE; |
| |
| irq = &pmic_eic->chip.irq; |
| irq->chip = &pmic_eic->intc; |
| irq->threaded = true; |
| |
| ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, pmic_eic); |
| return 0; |
| } |
| |
| static const struct of_device_id sprd_pmic_eic_of_match[] = { |
| { .compatible = "sprd,sc27xx-eic", }, |
| { /* end of list */ } |
| }; |
| MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match); |
| |
| static struct platform_driver sprd_pmic_eic_driver = { |
| .probe = sprd_pmic_eic_probe, |
| .driver = { |
| .name = "sprd-pmic-eic", |
| .of_match_table = sprd_pmic_eic_of_match, |
| }, |
| }; |
| |
| module_platform_driver(sprd_pmic_eic_driver); |
| |
| MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver"); |
| MODULE_LICENSE("GPL v2"); |