| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // drivers/dma/imx-sdma.c |
| // |
| // This file contains a driver for the Freescale Smart DMA engine |
| // |
| // Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| // |
| // Based on code from Freescale: |
| // |
| // Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| |
| #include <linux/init.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/bitops.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/semaphore.h> |
| #include <linux/spinlock.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/dmaengine.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_dma.h> |
| |
| #include <asm/irq.h> |
| #include <linux/platform_data/dma-imx-sdma.h> |
| #include <linux/platform_data/dma-imx.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> |
| |
| #include "dmaengine.h" |
| #include "virt-dma.h" |
| |
| /* SDMA registers */ |
| #define SDMA_H_C0PTR 0x000 |
| #define SDMA_H_INTR 0x004 |
| #define SDMA_H_STATSTOP 0x008 |
| #define SDMA_H_START 0x00c |
| #define SDMA_H_EVTOVR 0x010 |
| #define SDMA_H_DSPOVR 0x014 |
| #define SDMA_H_HOSTOVR 0x018 |
| #define SDMA_H_EVTPEND 0x01c |
| #define SDMA_H_DSPENBL 0x020 |
| #define SDMA_H_RESET 0x024 |
| #define SDMA_H_EVTERR 0x028 |
| #define SDMA_H_INTRMSK 0x02c |
| #define SDMA_H_PSW 0x030 |
| #define SDMA_H_EVTERRDBG 0x034 |
| #define SDMA_H_CONFIG 0x038 |
| #define SDMA_ONCE_ENB 0x040 |
| #define SDMA_ONCE_DATA 0x044 |
| #define SDMA_ONCE_INSTR 0x048 |
| #define SDMA_ONCE_STAT 0x04c |
| #define SDMA_ONCE_CMD 0x050 |
| #define SDMA_EVT_MIRROR 0x054 |
| #define SDMA_ILLINSTADDR 0x058 |
| #define SDMA_CHN0ADDR 0x05c |
| #define SDMA_ONCE_RTB 0x060 |
| #define SDMA_XTRIG_CONF1 0x070 |
| #define SDMA_XTRIG_CONF2 0x074 |
| #define SDMA_CHNENBL0_IMX35 0x200 |
| #define SDMA_CHNENBL0_IMX31 0x080 |
| #define SDMA_CHNPRI_0 0x100 |
| |
| /* |
| * Buffer descriptor status values. |
| */ |
| #define BD_DONE 0x01 |
| #define BD_WRAP 0x02 |
| #define BD_CONT 0x04 |
| #define BD_INTR 0x08 |
| #define BD_RROR 0x10 |
| #define BD_LAST 0x20 |
| #define BD_EXTD 0x80 |
| |
| /* |
| * Data Node descriptor status values. |
| */ |
| #define DND_END_OF_FRAME 0x80 |
| #define DND_END_OF_XFER 0x40 |
| #define DND_DONE 0x20 |
| #define DND_UNUSED 0x01 |
| |
| /* |
| * IPCV2 descriptor status values. |
| */ |
| #define BD_IPCV2_END_OF_FRAME 0x40 |
| |
| #define IPCV2_MAX_NODES 50 |
| /* |
| * Error bit set in the CCB status field by the SDMA, |
| * in setbd routine, in case of a transfer error |
| */ |
| #define DATA_ERROR 0x10000000 |
| |
| /* |
| * Buffer descriptor commands. |
| */ |
| #define C0_ADDR 0x01 |
| #define C0_LOAD 0x02 |
| #define C0_DUMP 0x03 |
| #define C0_SETCTX 0x07 |
| #define C0_GETCTX 0x03 |
| #define C0_SETDM 0x01 |
| #define C0_SETPM 0x04 |
| #define C0_GETDM 0x02 |
| #define C0_GETPM 0x08 |
| /* |
| * Change endianness indicator in the BD command field |
| */ |
| #define CHANGE_ENDIANNESS 0x80 |
| |
| /* |
| * p_2_p watermark_level description |
| * Bits Name Description |
| * 0-7 Lower WML Lower watermark level |
| * 8 PS 1: Pad Swallowing |
| * 0: No Pad Swallowing |
| * 9 PA 1: Pad Adding |
| * 0: No Pad Adding |
| * 10 SPDIF If this bit is set both source |
| * and destination are on SPBA |
| * 11 Source Bit(SP) 1: Source on SPBA |
| * 0: Source on AIPS |
| * 12 Destination Bit(DP) 1: Destination on SPBA |
| * 0: Destination on AIPS |
| * 13-15 --------- MUST BE 0 |
| * 16-23 Higher WML HWML |
| * 24-27 N Total number of samples after |
| * which Pad adding/Swallowing |
| * must be done. It must be odd. |
| * 28 Lower WML Event(LWE) SDMA events reg to check for |
| * LWML event mask |
| * 0: LWE in EVENTS register |
| * 1: LWE in EVENTS2 register |
| * 29 Higher WML Event(HWE) SDMA events reg to check for |
| * HWML event mask |
| * 0: HWE in EVENTS register |
| * 1: HWE in EVENTS2 register |
| * 30 --------- MUST BE 0 |
| * 31 CONT 1: Amount of samples to be |
| * transferred is unknown and |
| * script will keep on |
| * transferring samples as long as |
| * both events are detected and |
| * script must be manually stopped |
| * by the application |
| * 0: The amount of samples to be |
| * transferred is equal to the |
| * count field of mode word |
| */ |
| #define SDMA_WATERMARK_LEVEL_LWML 0xFF |
| #define SDMA_WATERMARK_LEVEL_PS BIT(8) |
| #define SDMA_WATERMARK_LEVEL_PA BIT(9) |
| #define SDMA_WATERMARK_LEVEL_SPDIF BIT(10) |
| #define SDMA_WATERMARK_LEVEL_SP BIT(11) |
| #define SDMA_WATERMARK_LEVEL_DP BIT(12) |
| #define SDMA_WATERMARK_LEVEL_HWML (0xFF << 16) |
| #define SDMA_WATERMARK_LEVEL_LWE BIT(28) |
| #define SDMA_WATERMARK_LEVEL_HWE BIT(29) |
| #define SDMA_WATERMARK_LEVEL_CONT BIT(31) |
| |
| #define SDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ |
| BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ |
| BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)) |
| |
| #define SDMA_DMA_DIRECTIONS (BIT(DMA_DEV_TO_MEM) | \ |
| BIT(DMA_MEM_TO_DEV) | \ |
| BIT(DMA_DEV_TO_DEV)) |
| |
| /* |
| * Mode/Count of data node descriptors - IPCv2 |
| */ |
| struct sdma_mode_count { |
| #define SDMA_BD_MAX_CNT 0xffff |
| u32 count : 16; /* size of the buffer pointed by this BD */ |
| u32 status : 8; /* E,R,I,C,W,D status bits stored here */ |
| u32 command : 8; /* command mostly used for channel 0 */ |
| }; |
| |
| /* |
| * Buffer descriptor |
| */ |
| struct sdma_buffer_descriptor { |
| struct sdma_mode_count mode; |
| u32 buffer_addr; /* address of the buffer described */ |
| u32 ext_buffer_addr; /* extended buffer address */ |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct sdma_channel_control - Channel control Block |
| * |
| * @current_bd_ptr: current buffer descriptor processed |
| * @base_bd_ptr: first element of buffer descriptor array |
| * @unused: padding. The SDMA engine expects an array of 128 byte |
| * control blocks |
| */ |
| struct sdma_channel_control { |
| u32 current_bd_ptr; |
| u32 base_bd_ptr; |
| u32 unused[2]; |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct sdma_state_registers - SDMA context for a channel |
| * |
| * @pc: program counter |
| * @unused1: unused |
| * @t: test bit: status of arithmetic & test instruction |
| * @rpc: return program counter |
| * @unused0: unused |
| * @sf: source fault while loading data |
| * @spc: loop start program counter |
| * @unused2: unused |
| * @df: destination fault while storing data |
| * @epc: loop end program counter |
| * @lm: loop mode |
| */ |
| struct sdma_state_registers { |
| u32 pc :14; |
| u32 unused1: 1; |
| u32 t : 1; |
| u32 rpc :14; |
| u32 unused0: 1; |
| u32 sf : 1; |
| u32 spc :14; |
| u32 unused2: 1; |
| u32 df : 1; |
| u32 epc :14; |
| u32 lm : 2; |
| } __attribute__ ((packed)); |
| |
| /** |
| * struct sdma_context_data - sdma context specific to a channel |
| * |
| * @channel_state: channel state bits |
| * @gReg: general registers |
| * @mda: burst dma destination address register |
| * @msa: burst dma source address register |
| * @ms: burst dma status register |
| * @md: burst dma data register |
| * @pda: peripheral dma destination address register |
| * @psa: peripheral dma source address register |
| * @ps: peripheral dma status register |
| * @pd: peripheral dma data register |
| * @ca: CRC polynomial register |
| * @cs: CRC accumulator register |
| * @dda: dedicated core destination address register |
| * @dsa: dedicated core source address register |
| * @ds: dedicated core status register |
| * @dd: dedicated core data register |
| * @scratch0: 1st word of dedicated ram for context switch |
| * @scratch1: 2nd word of dedicated ram for context switch |
| * @scratch2: 3rd word of dedicated ram for context switch |
| * @scratch3: 4th word of dedicated ram for context switch |
| * @scratch4: 5th word of dedicated ram for context switch |
| * @scratch5: 6th word of dedicated ram for context switch |
| * @scratch6: 7th word of dedicated ram for context switch |
| * @scratch7: 8th word of dedicated ram for context switch |
| */ |
| struct sdma_context_data { |
| struct sdma_state_registers channel_state; |
| u32 gReg[8]; |
| u32 mda; |
| u32 msa; |
| u32 ms; |
| u32 md; |
| u32 pda; |
| u32 psa; |
| u32 ps; |
| u32 pd; |
| u32 ca; |
| u32 cs; |
| u32 dda; |
| u32 dsa; |
| u32 ds; |
| u32 dd; |
| u32 scratch0; |
| u32 scratch1; |
| u32 scratch2; |
| u32 scratch3; |
| u32 scratch4; |
| u32 scratch5; |
| u32 scratch6; |
| u32 scratch7; |
| } __attribute__ ((packed)); |
| |
| |
| struct sdma_engine; |
| |
| /** |
| * struct sdma_desc - descriptor structor for one transfer |
| * @vd: descriptor for virt dma |
| * @num_bd: number of descriptors currently handling |
| * @bd_phys: physical address of bd |
| * @buf_tail: ID of the buffer that was processed |
| * @buf_ptail: ID of the previous buffer that was processed |
| * @period_len: period length, used in cyclic. |
| * @chn_real_count: the real count updated from bd->mode.count |
| * @chn_count: the transfer count set |
| * @sdmac: sdma_channel pointer |
| * @bd: pointer of allocate bd |
| */ |
| struct sdma_desc { |
| struct virt_dma_desc vd; |
| unsigned int num_bd; |
| dma_addr_t bd_phys; |
| unsigned int buf_tail; |
| unsigned int buf_ptail; |
| unsigned int period_len; |
| unsigned int chn_real_count; |
| unsigned int chn_count; |
| struct sdma_channel *sdmac; |
| struct sdma_buffer_descriptor *bd; |
| }; |
| |
| /** |
| * struct sdma_channel - housekeeping for a SDMA channel |
| * |
| * @vc: virt_dma base structure |
| * @desc: sdma description including vd and other special member |
| * @sdma: pointer to the SDMA engine for this channel |
| * @channel: the channel number, matches dmaengine chan_id + 1 |
| * @direction: transfer type. Needed for setting SDMA script |
| * @peripheral_type: Peripheral type. Needed for setting SDMA script |
| * @event_id0: aka dma request line |
| * @event_id1: for channels that use 2 events |
| * @word_size: peripheral access size |
| * @pc_from_device: script address for those device_2_memory |
| * @pc_to_device: script address for those memory_2_device |
| * @device_to_device: script address for those device_2_device |
| * @pc_to_pc: script address for those memory_2_memory |
| * @flags: loop mode or not |
| * @per_address: peripheral source or destination address in common case |
| * destination address in p_2_p case |
| * @per_address2: peripheral source address in p_2_p case |
| * @event_mask: event mask used in p_2_p script |
| * @watermark_level: value for gReg[7], some script will extend it from |
| * basic watermark such as p_2_p |
| * @shp_addr: value for gReg[6] |
| * @per_addr: value for gReg[2] |
| * @status: status of dma channel |
| * @data: specific sdma interface structure |
| * @bd_pool: dma_pool for bd |
| */ |
| struct sdma_channel { |
| struct virt_dma_chan vc; |
| struct sdma_desc *desc; |
| struct sdma_engine *sdma; |
| unsigned int channel; |
| enum dma_transfer_direction direction; |
| enum sdma_peripheral_type peripheral_type; |
| unsigned int event_id0; |
| unsigned int event_id1; |
| enum dma_slave_buswidth word_size; |
| unsigned int pc_from_device, pc_to_device; |
| unsigned int device_to_device; |
| unsigned int pc_to_pc; |
| unsigned long flags; |
| dma_addr_t per_address, per_address2; |
| unsigned long event_mask[2]; |
| unsigned long watermark_level; |
| u32 shp_addr, per_addr; |
| enum dma_status status; |
| struct imx_dma_data data; |
| struct dma_pool *bd_pool; |
| }; |
| |
| #define IMX_DMA_SG_LOOP BIT(0) |
| |
| #define MAX_DMA_CHANNELS 32 |
| #define MXC_SDMA_DEFAULT_PRIORITY 1 |
| #define MXC_SDMA_MIN_PRIORITY 1 |
| #define MXC_SDMA_MAX_PRIORITY 7 |
| |
| #define SDMA_FIRMWARE_MAGIC 0x414d4453 |
| |
| /** |
| * struct sdma_firmware_header - Layout of the firmware image |
| * |
| * @magic: "SDMA" |
| * @version_major: increased whenever layout of struct |
| * sdma_script_start_addrs changes. |
| * @version_minor: firmware minor version (for binary compatible changes) |
| * @script_addrs_start: offset of struct sdma_script_start_addrs in this image |
| * @num_script_addrs: Number of script addresses in this image |
| * @ram_code_start: offset of SDMA ram image in this firmware image |
| * @ram_code_size: size of SDMA ram image |
| * @script_addrs: Stores the start address of the SDMA scripts |
| * (in SDMA memory space) |
| */ |
| struct sdma_firmware_header { |
| u32 magic; |
| u32 version_major; |
| u32 version_minor; |
| u32 script_addrs_start; |
| u32 num_script_addrs; |
| u32 ram_code_start; |
| u32 ram_code_size; |
| }; |
| |
| struct sdma_driver_data { |
| int chnenbl0; |
| int num_events; |
| struct sdma_script_start_addrs *script_addrs; |
| }; |
| |
| struct sdma_engine { |
| struct device *dev; |
| struct device_dma_parameters dma_parms; |
| struct sdma_channel channel[MAX_DMA_CHANNELS]; |
| struct sdma_channel_control *channel_control; |
| void __iomem *regs; |
| struct sdma_context_data *context; |
| dma_addr_t context_phys; |
| struct dma_device dma_device; |
| struct clk *clk_ipg; |
| struct clk *clk_ahb; |
| spinlock_t channel_0_lock; |
| u32 script_number; |
| struct sdma_script_start_addrs *script_addrs; |
| const struct sdma_driver_data *drvdata; |
| u32 spba_start_addr; |
| u32 spba_end_addr; |
| unsigned int irq; |
| dma_addr_t bd0_phys; |
| struct sdma_buffer_descriptor *bd0; |
| }; |
| |
| static struct sdma_driver_data sdma_imx31 = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX31, |
| .num_events = 32, |
| }; |
| |
| static struct sdma_script_start_addrs sdma_script_imx25 = { |
| .ap_2_ap_addr = 729, |
| .uart_2_mcu_addr = 904, |
| .per_2_app_addr = 1255, |
| .mcu_2_app_addr = 834, |
| .uartsh_2_mcu_addr = 1120, |
| .per_2_shp_addr = 1329, |
| .mcu_2_shp_addr = 1048, |
| .ata_2_mcu_addr = 1560, |
| .mcu_2_ata_addr = 1479, |
| .app_2_per_addr = 1189, |
| .app_2_mcu_addr = 770, |
| .shp_2_per_addr = 1407, |
| .shp_2_mcu_addr = 979, |
| }; |
| |
| static struct sdma_driver_data sdma_imx25 = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| .num_events = 48, |
| .script_addrs = &sdma_script_imx25, |
| }; |
| |
| static struct sdma_driver_data sdma_imx35 = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| .num_events = 48, |
| }; |
| |
| static struct sdma_script_start_addrs sdma_script_imx51 = { |
| .ap_2_ap_addr = 642, |
| .uart_2_mcu_addr = 817, |
| .mcu_2_app_addr = 747, |
| .mcu_2_shp_addr = 961, |
| .ata_2_mcu_addr = 1473, |
| .mcu_2_ata_addr = 1392, |
| .app_2_per_addr = 1033, |
| .app_2_mcu_addr = 683, |
| .shp_2_per_addr = 1251, |
| .shp_2_mcu_addr = 892, |
| }; |
| |
| static struct sdma_driver_data sdma_imx51 = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| .num_events = 48, |
| .script_addrs = &sdma_script_imx51, |
| }; |
| |
| static struct sdma_script_start_addrs sdma_script_imx53 = { |
| .ap_2_ap_addr = 642, |
| .app_2_mcu_addr = 683, |
| .mcu_2_app_addr = 747, |
| .uart_2_mcu_addr = 817, |
| .shp_2_mcu_addr = 891, |
| .mcu_2_shp_addr = 960, |
| .uartsh_2_mcu_addr = 1032, |
| .spdif_2_mcu_addr = 1100, |
| .mcu_2_spdif_addr = 1134, |
| .firi_2_mcu_addr = 1193, |
| .mcu_2_firi_addr = 1290, |
| }; |
| |
| static struct sdma_driver_data sdma_imx53 = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| .num_events = 48, |
| .script_addrs = &sdma_script_imx53, |
| }; |
| |
| static struct sdma_script_start_addrs sdma_script_imx6q = { |
| .ap_2_ap_addr = 642, |
| .uart_2_mcu_addr = 817, |
| .mcu_2_app_addr = 747, |
| .per_2_per_addr = 6331, |
| .uartsh_2_mcu_addr = 1032, |
| .mcu_2_shp_addr = 960, |
| .app_2_mcu_addr = 683, |
| .shp_2_mcu_addr = 891, |
| .spdif_2_mcu_addr = 1100, |
| .mcu_2_spdif_addr = 1134, |
| }; |
| |
| static struct sdma_driver_data sdma_imx6q = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| .num_events = 48, |
| .script_addrs = &sdma_script_imx6q, |
| }; |
| |
| static struct sdma_script_start_addrs sdma_script_imx7d = { |
| .ap_2_ap_addr = 644, |
| .uart_2_mcu_addr = 819, |
| .mcu_2_app_addr = 749, |
| .uartsh_2_mcu_addr = 1034, |
| .mcu_2_shp_addr = 962, |
| .app_2_mcu_addr = 685, |
| .shp_2_mcu_addr = 893, |
| .spdif_2_mcu_addr = 1102, |
| .mcu_2_spdif_addr = 1136, |
| }; |
| |
| static struct sdma_driver_data sdma_imx7d = { |
| .chnenbl0 = SDMA_CHNENBL0_IMX35, |
| .num_events = 48, |
| .script_addrs = &sdma_script_imx7d, |
| }; |
| |
| static const struct platform_device_id sdma_devtypes[] = { |
| { |
| .name = "imx25-sdma", |
| .driver_data = (unsigned long)&sdma_imx25, |
| }, { |
| .name = "imx31-sdma", |
| .driver_data = (unsigned long)&sdma_imx31, |
| }, { |
| .name = "imx35-sdma", |
| .driver_data = (unsigned long)&sdma_imx35, |
| }, { |
| .name = "imx51-sdma", |
| .driver_data = (unsigned long)&sdma_imx51, |
| }, { |
| .name = "imx53-sdma", |
| .driver_data = (unsigned long)&sdma_imx53, |
| }, { |
| .name = "imx6q-sdma", |
| .driver_data = (unsigned long)&sdma_imx6q, |
| }, { |
| .name = "imx7d-sdma", |
| .driver_data = (unsigned long)&sdma_imx7d, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, sdma_devtypes); |
| |
| static const struct of_device_id sdma_dt_ids[] = { |
| { .compatible = "fsl,imx6q-sdma", .data = &sdma_imx6q, }, |
| { .compatible = "fsl,imx53-sdma", .data = &sdma_imx53, }, |
| { .compatible = "fsl,imx51-sdma", .data = &sdma_imx51, }, |
| { .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, }, |
| { .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, }, |
| { .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, }, |
| { .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, sdma_dt_ids); |
| |
| #define SDMA_H_CONFIG_DSPDMA BIT(12) /* indicates if the DSPDMA is used */ |
| #define SDMA_H_CONFIG_RTD_PINS BIT(11) /* indicates if Real-Time Debug pins are enabled */ |
| #define SDMA_H_CONFIG_ACR BIT(4) /* indicates if AHB freq /core freq = 2 or 1 */ |
| #define SDMA_H_CONFIG_CSM (3) /* indicates which context switch mode is selected*/ |
| |
| static inline u32 chnenbl_ofs(struct sdma_engine *sdma, unsigned int event) |
| { |
| u32 chnenbl0 = sdma->drvdata->chnenbl0; |
| return chnenbl0 + event * 4; |
| } |
| |
| static int sdma_config_ownership(struct sdma_channel *sdmac, |
| bool event_override, bool mcu_override, bool dsp_override) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| unsigned long evt, mcu, dsp; |
| |
| if (event_override && mcu_override && dsp_override) |
| return -EINVAL; |
| |
| evt = readl_relaxed(sdma->regs + SDMA_H_EVTOVR); |
| mcu = readl_relaxed(sdma->regs + SDMA_H_HOSTOVR); |
| dsp = readl_relaxed(sdma->regs + SDMA_H_DSPOVR); |
| |
| if (dsp_override) |
| __clear_bit(channel, &dsp); |
| else |
| __set_bit(channel, &dsp); |
| |
| if (event_override) |
| __clear_bit(channel, &evt); |
| else |
| __set_bit(channel, &evt); |
| |
| if (mcu_override) |
| __clear_bit(channel, &mcu); |
| else |
| __set_bit(channel, &mcu); |
| |
| writel_relaxed(evt, sdma->regs + SDMA_H_EVTOVR); |
| writel_relaxed(mcu, sdma->regs + SDMA_H_HOSTOVR); |
| writel_relaxed(dsp, sdma->regs + SDMA_H_DSPOVR); |
| |
| return 0; |
| } |
| |
| static void sdma_enable_channel(struct sdma_engine *sdma, int channel) |
| { |
| writel(BIT(channel), sdma->regs + SDMA_H_START); |
| } |
| |
| /* |
| * sdma_run_channel0 - run a channel and wait till it's done |
| */ |
| static int sdma_run_channel0(struct sdma_engine *sdma) |
| { |
| int ret; |
| u32 reg; |
| |
| sdma_enable_channel(sdma, 0); |
| |
| ret = readl_relaxed_poll_timeout_atomic(sdma->regs + SDMA_H_STATSTOP, |
| reg, !(reg & 1), 1, 500); |
| if (ret) |
| dev_err(sdma->dev, "Timeout waiting for CH0 ready\n"); |
| |
| /* Set bits of CONFIG register with dynamic context switching */ |
| if (readl(sdma->regs + SDMA_H_CONFIG) == 0) |
| writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); |
| |
| return ret; |
| } |
| |
| static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, |
| u32 address) |
| { |
| struct sdma_buffer_descriptor *bd0 = sdma->bd0; |
| void *buf_virt; |
| dma_addr_t buf_phys; |
| int ret; |
| unsigned long flags; |
| |
| buf_virt = dma_alloc_coherent(NULL, |
| size, |
| &buf_phys, GFP_KERNEL); |
| if (!buf_virt) { |
| return -ENOMEM; |
| } |
| |
| spin_lock_irqsave(&sdma->channel_0_lock, flags); |
| |
| bd0->mode.command = C0_SETPM; |
| bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| bd0->mode.count = size / 2; |
| bd0->buffer_addr = buf_phys; |
| bd0->ext_buffer_addr = address; |
| |
| memcpy(buf_virt, buf, size); |
| |
| ret = sdma_run_channel0(sdma); |
| |
| spin_unlock_irqrestore(&sdma->channel_0_lock, flags); |
| |
| dma_free_coherent(NULL, size, buf_virt, buf_phys); |
| |
| return ret; |
| } |
| |
| static void sdma_event_enable(struct sdma_channel *sdmac, unsigned int event) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| unsigned long val; |
| u32 chnenbl = chnenbl_ofs(sdma, event); |
| |
| val = readl_relaxed(sdma->regs + chnenbl); |
| __set_bit(channel, &val); |
| writel_relaxed(val, sdma->regs + chnenbl); |
| } |
| |
| static void sdma_event_disable(struct sdma_channel *sdmac, unsigned int event) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| u32 chnenbl = chnenbl_ofs(sdma, event); |
| unsigned long val; |
| |
| val = readl_relaxed(sdma->regs + chnenbl); |
| __clear_bit(channel, &val); |
| writel_relaxed(val, sdma->regs + chnenbl); |
| } |
| |
| static struct sdma_desc *to_sdma_desc(struct dma_async_tx_descriptor *t) |
| { |
| return container_of(t, struct sdma_desc, vd.tx); |
| } |
| |
| static void sdma_start_desc(struct sdma_channel *sdmac) |
| { |
| struct virt_dma_desc *vd = vchan_next_desc(&sdmac->vc); |
| struct sdma_desc *desc; |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| |
| if (!vd) { |
| sdmac->desc = NULL; |
| return; |
| } |
| sdmac->desc = desc = to_sdma_desc(&vd->tx); |
| /* |
| * Do not delete the node in desc_issued list in cyclic mode, otherwise |
| * the desc allocated will never be freed in vchan_dma_desc_free_list |
| */ |
| if (!(sdmac->flags & IMX_DMA_SG_LOOP)) |
| list_del(&vd->node); |
| |
| sdma->channel_control[channel].base_bd_ptr = desc->bd_phys; |
| sdma->channel_control[channel].current_bd_ptr = desc->bd_phys; |
| sdma_enable_channel(sdma, sdmac->channel); |
| } |
| |
| static void sdma_update_channel_loop(struct sdma_channel *sdmac) |
| { |
| struct sdma_buffer_descriptor *bd; |
| int error = 0; |
| enum dma_status old_status = sdmac->status; |
| |
| /* |
| * loop mode. Iterate over descriptors, re-setup them and |
| * call callback function. |
| */ |
| while (sdmac->desc) { |
| struct sdma_desc *desc = sdmac->desc; |
| |
| bd = &desc->bd[desc->buf_tail]; |
| |
| if (bd->mode.status & BD_DONE) |
| break; |
| |
| if (bd->mode.status & BD_RROR) { |
| bd->mode.status &= ~BD_RROR; |
| sdmac->status = DMA_ERROR; |
| error = -EIO; |
| } |
| |
| /* |
| * We use bd->mode.count to calculate the residue, since contains |
| * the number of bytes present in the current buffer descriptor. |
| */ |
| |
| desc->chn_real_count = bd->mode.count; |
| bd->mode.status |= BD_DONE; |
| bd->mode.count = desc->period_len; |
| desc->buf_ptail = desc->buf_tail; |
| desc->buf_tail = (desc->buf_tail + 1) % desc->num_bd; |
| |
| /* |
| * The callback is called from the interrupt context in order |
| * to reduce latency and to avoid the risk of altering the |
| * SDMA transaction status by the time the client tasklet is |
| * executed. |
| */ |
| spin_unlock(&sdmac->vc.lock); |
| dmaengine_desc_get_callback_invoke(&desc->vd.tx, NULL); |
| spin_lock(&sdmac->vc.lock); |
| |
| if (error) |
| sdmac->status = old_status; |
| } |
| } |
| |
| static void mxc_sdma_handle_channel_normal(struct sdma_channel *data) |
| { |
| struct sdma_channel *sdmac = (struct sdma_channel *) data; |
| struct sdma_buffer_descriptor *bd; |
| int i, error = 0; |
| |
| sdmac->desc->chn_real_count = 0; |
| /* |
| * non loop mode. Iterate over all descriptors, collect |
| * errors and call callback function |
| */ |
| for (i = 0; i < sdmac->desc->num_bd; i++) { |
| bd = &sdmac->desc->bd[i]; |
| |
| if (bd->mode.status & (BD_DONE | BD_RROR)) |
| error = -EIO; |
| sdmac->desc->chn_real_count += bd->mode.count; |
| } |
| |
| if (error) |
| sdmac->status = DMA_ERROR; |
| else |
| sdmac->status = DMA_COMPLETE; |
| } |
| |
| static irqreturn_t sdma_int_handler(int irq, void *dev_id) |
| { |
| struct sdma_engine *sdma = dev_id; |
| unsigned long stat; |
| |
| stat = readl_relaxed(sdma->regs + SDMA_H_INTR); |
| writel_relaxed(stat, sdma->regs + SDMA_H_INTR); |
| /* channel 0 is special and not handled here, see run_channel0() */ |
| stat &= ~1; |
| |
| while (stat) { |
| int channel = fls(stat) - 1; |
| struct sdma_channel *sdmac = &sdma->channel[channel]; |
| struct sdma_desc *desc; |
| |
| spin_lock(&sdmac->vc.lock); |
| desc = sdmac->desc; |
| if (desc) { |
| if (sdmac->flags & IMX_DMA_SG_LOOP) { |
| sdma_update_channel_loop(sdmac); |
| } else { |
| mxc_sdma_handle_channel_normal(sdmac); |
| vchan_cookie_complete(&desc->vd); |
| sdma_start_desc(sdmac); |
| } |
| } |
| |
| spin_unlock(&sdmac->vc.lock); |
| __clear_bit(channel, &stat); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * sets the pc of SDMA script according to the peripheral type |
| */ |
| static void sdma_get_pc(struct sdma_channel *sdmac, |
| enum sdma_peripheral_type peripheral_type) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int per_2_emi = 0, emi_2_per = 0; |
| /* |
| * These are needed once we start to support transfers between |
| * two peripherals or memory-to-memory transfers |
| */ |
| int per_2_per = 0, emi_2_emi = 0; |
| |
| sdmac->pc_from_device = 0; |
| sdmac->pc_to_device = 0; |
| sdmac->device_to_device = 0; |
| sdmac->pc_to_pc = 0; |
| |
| switch (peripheral_type) { |
| case IMX_DMATYPE_MEMORY: |
| emi_2_emi = sdma->script_addrs->ap_2_ap_addr; |
| break; |
| case IMX_DMATYPE_DSP: |
| emi_2_per = sdma->script_addrs->bp_2_ap_addr; |
| per_2_emi = sdma->script_addrs->ap_2_bp_addr; |
| break; |
| case IMX_DMATYPE_FIRI: |
| per_2_emi = sdma->script_addrs->firi_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_firi_addr; |
| break; |
| case IMX_DMATYPE_UART: |
| per_2_emi = sdma->script_addrs->uart_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| break; |
| case IMX_DMATYPE_UART_SP: |
| per_2_emi = sdma->script_addrs->uartsh_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| break; |
| case IMX_DMATYPE_ATA: |
| per_2_emi = sdma->script_addrs->ata_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_ata_addr; |
| break; |
| case IMX_DMATYPE_CSPI: |
| case IMX_DMATYPE_EXT: |
| case IMX_DMATYPE_SSI: |
| case IMX_DMATYPE_SAI: |
| per_2_emi = sdma->script_addrs->app_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_app_addr; |
| break; |
| case IMX_DMATYPE_SSI_DUAL: |
| per_2_emi = sdma->script_addrs->ssish_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_ssish_addr; |
| break; |
| case IMX_DMATYPE_SSI_SP: |
| case IMX_DMATYPE_MMC: |
| case IMX_DMATYPE_SDHC: |
| case IMX_DMATYPE_CSPI_SP: |
| case IMX_DMATYPE_ESAI: |
| case IMX_DMATYPE_MSHC_SP: |
| per_2_emi = sdma->script_addrs->shp_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| break; |
| case IMX_DMATYPE_ASRC: |
| per_2_emi = sdma->script_addrs->asrc_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; |
| per_2_per = sdma->script_addrs->per_2_per_addr; |
| break; |
| case IMX_DMATYPE_ASRC_SP: |
| per_2_emi = sdma->script_addrs->shp_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_shp_addr; |
| per_2_per = sdma->script_addrs->per_2_per_addr; |
| break; |
| case IMX_DMATYPE_MSHC: |
| per_2_emi = sdma->script_addrs->mshc_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_mshc_addr; |
| break; |
| case IMX_DMATYPE_CCM: |
| per_2_emi = sdma->script_addrs->dptc_dvfs_addr; |
| break; |
| case IMX_DMATYPE_SPDIF: |
| per_2_emi = sdma->script_addrs->spdif_2_mcu_addr; |
| emi_2_per = sdma->script_addrs->mcu_2_spdif_addr; |
| break; |
| case IMX_DMATYPE_IPU_MEMORY: |
| emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr; |
| break; |
| default: |
| break; |
| } |
| |
| sdmac->pc_from_device = per_2_emi; |
| sdmac->pc_to_device = emi_2_per; |
| sdmac->device_to_device = per_2_per; |
| sdmac->pc_to_pc = emi_2_emi; |
| } |
| |
| static int sdma_load_context(struct sdma_channel *sdmac) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| int load_address; |
| struct sdma_context_data *context = sdma->context; |
| struct sdma_buffer_descriptor *bd0 = sdma->bd0; |
| int ret; |
| unsigned long flags; |
| |
| if (sdmac->direction == DMA_DEV_TO_MEM) |
| load_address = sdmac->pc_from_device; |
| else if (sdmac->direction == DMA_DEV_TO_DEV) |
| load_address = sdmac->device_to_device; |
| else if (sdmac->direction == DMA_MEM_TO_MEM) |
| load_address = sdmac->pc_to_pc; |
| else |
| load_address = sdmac->pc_to_device; |
| |
| if (load_address < 0) |
| return load_address; |
| |
| dev_dbg(sdma->dev, "load_address = %d\n", load_address); |
| dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level); |
| dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr); |
| dev_dbg(sdma->dev, "per_addr = 0x%08x\n", sdmac->per_addr); |
| dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", (u32)sdmac->event_mask[0]); |
| dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", (u32)sdmac->event_mask[1]); |
| |
| spin_lock_irqsave(&sdma->channel_0_lock, flags); |
| |
| memset(context, 0, sizeof(*context)); |
| context->channel_state.pc = load_address; |
| |
| /* Send by context the event mask,base address for peripheral |
| * and watermark level |
| */ |
| context->gReg[0] = sdmac->event_mask[1]; |
| context->gReg[1] = sdmac->event_mask[0]; |
| context->gReg[2] = sdmac->per_addr; |
| context->gReg[6] = sdmac->shp_addr; |
| context->gReg[7] = sdmac->watermark_level; |
| |
| bd0->mode.command = C0_SETDM; |
| bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; |
| bd0->mode.count = sizeof(*context) / 4; |
| bd0->buffer_addr = sdma->context_phys; |
| bd0->ext_buffer_addr = 2048 + (sizeof(*context) / 4) * channel; |
| ret = sdma_run_channel0(sdma); |
| |
| spin_unlock_irqrestore(&sdma->channel_0_lock, flags); |
| |
| return ret; |
| } |
| |
| static struct sdma_channel *to_sdma_chan(struct dma_chan *chan) |
| { |
| return container_of(chan, struct sdma_channel, vc.chan); |
| } |
| |
| static int sdma_disable_channel(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| |
| writel_relaxed(BIT(channel), sdma->regs + SDMA_H_STATSTOP); |
| sdmac->status = DMA_ERROR; |
| |
| return 0; |
| } |
| |
| static int sdma_disable_channel_with_delay(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| unsigned long flags; |
| LIST_HEAD(head); |
| |
| sdma_disable_channel(chan); |
| spin_lock_irqsave(&sdmac->vc.lock, flags); |
| vchan_get_all_descriptors(&sdmac->vc, &head); |
| sdmac->desc = NULL; |
| spin_unlock_irqrestore(&sdmac->vc.lock, flags); |
| vchan_dma_desc_free_list(&sdmac->vc, &head); |
| |
| /* |
| * According to NXP R&D team a delay of one BD SDMA cost time |
| * (maximum is 1ms) should be added after disable of the channel |
| * bit, to ensure SDMA core has really been stopped after SDMA |
| * clients call .device_terminate_all. |
| */ |
| mdelay(1); |
| |
| return 0; |
| } |
| |
| static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| |
| int lwml = sdmac->watermark_level & SDMA_WATERMARK_LEVEL_LWML; |
| int hwml = (sdmac->watermark_level & SDMA_WATERMARK_LEVEL_HWML) >> 16; |
| |
| set_bit(sdmac->event_id0 % 32, &sdmac->event_mask[1]); |
| set_bit(sdmac->event_id1 % 32, &sdmac->event_mask[0]); |
| |
| if (sdmac->event_id0 > 31) |
| sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_LWE; |
| |
| if (sdmac->event_id1 > 31) |
| sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_HWE; |
| |
| /* |
| * If LWML(src_maxburst) > HWML(dst_maxburst), we need |
| * swap LWML and HWML of INFO(A.3.2.5.1), also need swap |
| * r0(event_mask[1]) and r1(event_mask[0]). |
| */ |
| if (lwml > hwml) { |
| sdmac->watermark_level &= ~(SDMA_WATERMARK_LEVEL_LWML | |
| SDMA_WATERMARK_LEVEL_HWML); |
| sdmac->watermark_level |= hwml; |
| sdmac->watermark_level |= lwml << 16; |
| swap(sdmac->event_mask[0], sdmac->event_mask[1]); |
| } |
| |
| if (sdmac->per_address2 >= sdma->spba_start_addr && |
| sdmac->per_address2 <= sdma->spba_end_addr) |
| sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP; |
| |
| if (sdmac->per_address >= sdma->spba_start_addr && |
| sdmac->per_address <= sdma->spba_end_addr) |
| sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP; |
| |
| sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT; |
| } |
| |
| static int sdma_config_channel(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| int ret; |
| |
| sdma_disable_channel(chan); |
| |
| sdmac->event_mask[0] = 0; |
| sdmac->event_mask[1] = 0; |
| sdmac->shp_addr = 0; |
| sdmac->per_addr = 0; |
| |
| if (sdmac->event_id0) { |
| if (sdmac->event_id0 >= sdmac->sdma->drvdata->num_events) |
| return -EINVAL; |
| sdma_event_enable(sdmac, sdmac->event_id0); |
| } |
| |
| if (sdmac->event_id1) { |
| if (sdmac->event_id1 >= sdmac->sdma->drvdata->num_events) |
| return -EINVAL; |
| sdma_event_enable(sdmac, sdmac->event_id1); |
| } |
| |
| switch (sdmac->peripheral_type) { |
| case IMX_DMATYPE_DSP: |
| sdma_config_ownership(sdmac, false, true, true); |
| break; |
| case IMX_DMATYPE_MEMORY: |
| sdma_config_ownership(sdmac, false, true, false); |
| break; |
| default: |
| sdma_config_ownership(sdmac, true, true, false); |
| break; |
| } |
| |
| sdma_get_pc(sdmac, sdmac->peripheral_type); |
| |
| if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) && |
| (sdmac->peripheral_type != IMX_DMATYPE_DSP)) { |
| /* Handle multiple event channels differently */ |
| if (sdmac->event_id1) { |
| if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP || |
| sdmac->peripheral_type == IMX_DMATYPE_ASRC) |
| sdma_set_watermarklevel_for_p2p(sdmac); |
| } else |
| __set_bit(sdmac->event_id0, sdmac->event_mask); |
| |
| /* Address */ |
| sdmac->shp_addr = sdmac->per_address; |
| sdmac->per_addr = sdmac->per_address2; |
| } else { |
| sdmac->watermark_level = 0; /* FIXME: M3_BASE_ADDRESS */ |
| } |
| |
| ret = sdma_load_context(sdmac); |
| |
| return ret; |
| } |
| |
| static int sdma_set_channel_priority(struct sdma_channel *sdmac, |
| unsigned int priority) |
| { |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| |
| if (priority < MXC_SDMA_MIN_PRIORITY |
| || priority > MXC_SDMA_MAX_PRIORITY) { |
| return -EINVAL; |
| } |
| |
| writel_relaxed(priority, sdma->regs + SDMA_CHNPRI_0 + 4 * channel); |
| |
| return 0; |
| } |
| |
| static int sdma_request_channel0(struct sdma_engine *sdma) |
| { |
| int ret = -EBUSY; |
| |
| sdma->bd0 = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdma->bd0_phys, |
| GFP_NOWAIT); |
| if (!sdma->bd0) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| sdma->channel_control[0].base_bd_ptr = sdma->bd0_phys; |
| sdma->channel_control[0].current_bd_ptr = sdma->bd0_phys; |
| |
| sdma_set_channel_priority(&sdma->channel[0], MXC_SDMA_DEFAULT_PRIORITY); |
| return 0; |
| out: |
| |
| return ret; |
| } |
| |
| |
| static int sdma_alloc_bd(struct sdma_desc *desc) |
| { |
| int ret = 0; |
| |
| desc->bd = dma_pool_alloc(desc->sdmac->bd_pool, GFP_NOWAIT, |
| &desc->bd_phys); |
| if (!desc->bd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| out: |
| return ret; |
| } |
| |
| static void sdma_free_bd(struct sdma_desc *desc) |
| { |
| dma_pool_free(desc->sdmac->bd_pool, desc->bd, desc->bd_phys); |
| } |
| |
| static void sdma_desc_free(struct virt_dma_desc *vd) |
| { |
| struct sdma_desc *desc = container_of(vd, struct sdma_desc, vd); |
| |
| sdma_free_bd(desc); |
| kfree(desc); |
| } |
| |
| static int sdma_alloc_chan_resources(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct imx_dma_data *data = chan->private; |
| struct imx_dma_data mem_data; |
| int prio, ret; |
| |
| /* |
| * MEMCPY may never setup chan->private by filter function such as |
| * dmatest, thus create 'struct imx_dma_data mem_data' for this case. |
| * Please note in any other slave case, you have to setup chan->private |
| * with 'struct imx_dma_data' in your own filter function if you want to |
| * request dma channel by dma_request_channel() rather than |
| * dma_request_slave_channel(). Othwise, 'MEMCPY in case?' will appear |
| * to warn you to correct your filter function. |
| */ |
| if (!data) { |
| dev_dbg(sdmac->sdma->dev, "MEMCPY in case?\n"); |
| mem_data.priority = 2; |
| mem_data.peripheral_type = IMX_DMATYPE_MEMORY; |
| mem_data.dma_request = 0; |
| mem_data.dma_request2 = 0; |
| data = &mem_data; |
| |
| sdma_get_pc(sdmac, IMX_DMATYPE_MEMORY); |
| } |
| |
| switch (data->priority) { |
| case DMA_PRIO_HIGH: |
| prio = 3; |
| break; |
| case DMA_PRIO_MEDIUM: |
| prio = 2; |
| break; |
| case DMA_PRIO_LOW: |
| default: |
| prio = 1; |
| break; |
| } |
| |
| sdmac->peripheral_type = data->peripheral_type; |
| sdmac->event_id0 = data->dma_request; |
| sdmac->event_id1 = data->dma_request2; |
| |
| ret = clk_enable(sdmac->sdma->clk_ipg); |
| if (ret) |
| return ret; |
| ret = clk_enable(sdmac->sdma->clk_ahb); |
| if (ret) |
| goto disable_clk_ipg; |
| |
| ret = sdma_set_channel_priority(sdmac, prio); |
| if (ret) |
| goto disable_clk_ahb; |
| |
| sdmac->bd_pool = dma_pool_create("bd_pool", chan->device->dev, |
| sizeof(struct sdma_buffer_descriptor), |
| 32, 0); |
| |
| return 0; |
| |
| disable_clk_ahb: |
| clk_disable(sdmac->sdma->clk_ahb); |
| disable_clk_ipg: |
| clk_disable(sdmac->sdma->clk_ipg); |
| return ret; |
| } |
| |
| static void sdma_free_chan_resources(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| |
| sdma_disable_channel_with_delay(chan); |
| |
| if (sdmac->event_id0) |
| sdma_event_disable(sdmac, sdmac->event_id0); |
| if (sdmac->event_id1) |
| sdma_event_disable(sdmac, sdmac->event_id1); |
| |
| sdmac->event_id0 = 0; |
| sdmac->event_id1 = 0; |
| |
| sdma_set_channel_priority(sdmac, 0); |
| |
| clk_disable(sdma->clk_ipg); |
| clk_disable(sdma->clk_ahb); |
| |
| dma_pool_destroy(sdmac->bd_pool); |
| sdmac->bd_pool = NULL; |
| } |
| |
| static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac, |
| enum dma_transfer_direction direction, u32 bds) |
| { |
| struct sdma_desc *desc; |
| |
| desc = kzalloc((sizeof(*desc)), GFP_NOWAIT); |
| if (!desc) |
| goto err_out; |
| |
| sdmac->status = DMA_IN_PROGRESS; |
| sdmac->direction = direction; |
| sdmac->flags = 0; |
| |
| desc->chn_count = 0; |
| desc->chn_real_count = 0; |
| desc->buf_tail = 0; |
| desc->buf_ptail = 0; |
| desc->sdmac = sdmac; |
| desc->num_bd = bds; |
| |
| if (sdma_alloc_bd(desc)) |
| goto err_desc_out; |
| |
| /* No slave_config called in MEMCPY case, so do here */ |
| if (direction == DMA_MEM_TO_MEM) |
| sdma_config_ownership(sdmac, false, true, false); |
| |
| if (sdma_load_context(sdmac)) |
| goto err_desc_out; |
| |
| return desc; |
| |
| err_desc_out: |
| kfree(desc); |
| err_out: |
| return NULL; |
| } |
| |
| static struct dma_async_tx_descriptor *sdma_prep_memcpy( |
| struct dma_chan *chan, dma_addr_t dma_dst, |
| dma_addr_t dma_src, size_t len, unsigned long flags) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| int channel = sdmac->channel; |
| size_t count; |
| int i = 0, param; |
| struct sdma_buffer_descriptor *bd; |
| struct sdma_desc *desc; |
| |
| if (!chan || !len) |
| return NULL; |
| |
| dev_dbg(sdma->dev, "memcpy: %pad->%pad, len=%zu, channel=%d.\n", |
| &dma_src, &dma_dst, len, channel); |
| |
| desc = sdma_transfer_init(sdmac, DMA_MEM_TO_MEM, |
| len / SDMA_BD_MAX_CNT + 1); |
| if (!desc) |
| return NULL; |
| |
| do { |
| count = min_t(size_t, len, SDMA_BD_MAX_CNT); |
| bd = &desc->bd[i]; |
| bd->buffer_addr = dma_src; |
| bd->ext_buffer_addr = dma_dst; |
| bd->mode.count = count; |
| desc->chn_count += count; |
| bd->mode.command = 0; |
| |
| dma_src += count; |
| dma_dst += count; |
| len -= count; |
| i++; |
| |
| param = BD_DONE | BD_EXTD | BD_CONT; |
| /* last bd */ |
| if (!len) { |
| param |= BD_INTR; |
| param |= BD_LAST; |
| param &= ~BD_CONT; |
| } |
| |
| dev_dbg(sdma->dev, "entry %d: count: %zd dma: 0x%x %s%s\n", |
| i, count, bd->buffer_addr, |
| param & BD_WRAP ? "wrap" : "", |
| param & BD_INTR ? " intr" : ""); |
| |
| bd->mode.status = param; |
| } while (len); |
| |
| return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); |
| } |
| |
| static struct dma_async_tx_descriptor *sdma_prep_slave_sg( |
| struct dma_chan *chan, struct scatterlist *sgl, |
| unsigned int sg_len, enum dma_transfer_direction direction, |
| unsigned long flags, void *context) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| int i, count; |
| int channel = sdmac->channel; |
| struct scatterlist *sg; |
| struct sdma_desc *desc; |
| |
| desc = sdma_transfer_init(sdmac, direction, sg_len); |
| if (!desc) |
| goto err_out; |
| |
| dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n", |
| sg_len, channel); |
| |
| for_each_sg(sgl, sg, sg_len, i) { |
| struct sdma_buffer_descriptor *bd = &desc->bd[i]; |
| int param; |
| |
| bd->buffer_addr = sg->dma_address; |
| |
| count = sg_dma_len(sg); |
| |
| if (count > SDMA_BD_MAX_CNT) { |
| dev_err(sdma->dev, "SDMA channel %d: maximum bytes for sg entry exceeded: %d > %d\n", |
| channel, count, SDMA_BD_MAX_CNT); |
| goto err_bd_out; |
| } |
| |
| bd->mode.count = count; |
| desc->chn_count += count; |
| |
| if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) |
| goto err_bd_out; |
| |
| switch (sdmac->word_size) { |
| case DMA_SLAVE_BUSWIDTH_4_BYTES: |
| bd->mode.command = 0; |
| if (count & 3 || sg->dma_address & 3) |
| goto err_bd_out; |
| break; |
| case DMA_SLAVE_BUSWIDTH_2_BYTES: |
| bd->mode.command = 2; |
| if (count & 1 || sg->dma_address & 1) |
| goto err_bd_out; |
| break; |
| case DMA_SLAVE_BUSWIDTH_1_BYTE: |
| bd->mode.command = 1; |
| break; |
| default: |
| goto err_bd_out; |
| } |
| |
| param = BD_DONE | BD_EXTD | BD_CONT; |
| |
| if (i + 1 == sg_len) { |
| param |= BD_INTR; |
| param |= BD_LAST; |
| param &= ~BD_CONT; |
| } |
| |
| dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n", |
| i, count, (u64)sg->dma_address, |
| param & BD_WRAP ? "wrap" : "", |
| param & BD_INTR ? " intr" : ""); |
| |
| bd->mode.status = param; |
| } |
| |
| return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); |
| err_bd_out: |
| sdma_free_bd(desc); |
| kfree(desc); |
| err_out: |
| sdmac->status = DMA_ERROR; |
| return NULL; |
| } |
| |
| static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( |
| struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, |
| size_t period_len, enum dma_transfer_direction direction, |
| unsigned long flags) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_engine *sdma = sdmac->sdma; |
| int num_periods = buf_len / period_len; |
| int channel = sdmac->channel; |
| int i = 0, buf = 0; |
| struct sdma_desc *desc; |
| |
| dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel); |
| |
| desc = sdma_transfer_init(sdmac, direction, num_periods); |
| if (!desc) |
| goto err_out; |
| |
| desc->period_len = period_len; |
| |
| sdmac->flags |= IMX_DMA_SG_LOOP; |
| |
| if (period_len > SDMA_BD_MAX_CNT) { |
| dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %zu > %d\n", |
| channel, period_len, SDMA_BD_MAX_CNT); |
| goto err_bd_out; |
| } |
| |
| while (buf < buf_len) { |
| struct sdma_buffer_descriptor *bd = &desc->bd[i]; |
| int param; |
| |
| bd->buffer_addr = dma_addr; |
| |
| bd->mode.count = period_len; |
| |
| if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) |
| goto err_bd_out; |
| if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES) |
| bd->mode.command = 0; |
| else |
| bd->mode.command = sdmac->word_size; |
| |
| param = BD_DONE | BD_EXTD | BD_CONT | BD_INTR; |
| if (i + 1 == num_periods) |
| param |= BD_WRAP; |
| |
| dev_dbg(sdma->dev, "entry %d: count: %zu dma: %#llx %s%s\n", |
| i, period_len, (u64)dma_addr, |
| param & BD_WRAP ? "wrap" : "", |
| param & BD_INTR ? " intr" : ""); |
| |
| bd->mode.status = param; |
| |
| dma_addr += period_len; |
| buf += period_len; |
| |
| i++; |
| } |
| |
| return vchan_tx_prep(&sdmac->vc, &desc->vd, flags); |
| err_bd_out: |
| sdma_free_bd(desc); |
| kfree(desc); |
| err_out: |
| sdmac->status = DMA_ERROR; |
| return NULL; |
| } |
| |
| static int sdma_config(struct dma_chan *chan, |
| struct dma_slave_config *dmaengine_cfg) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| |
| if (dmaengine_cfg->direction == DMA_DEV_TO_MEM) { |
| sdmac->per_address = dmaengine_cfg->src_addr; |
| sdmac->watermark_level = dmaengine_cfg->src_maxburst * |
| dmaengine_cfg->src_addr_width; |
| sdmac->word_size = dmaengine_cfg->src_addr_width; |
| } else if (dmaengine_cfg->direction == DMA_DEV_TO_DEV) { |
| sdmac->per_address2 = dmaengine_cfg->src_addr; |
| sdmac->per_address = dmaengine_cfg->dst_addr; |
| sdmac->watermark_level = dmaengine_cfg->src_maxburst & |
| SDMA_WATERMARK_LEVEL_LWML; |
| sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst << 16) & |
| SDMA_WATERMARK_LEVEL_HWML; |
| sdmac->word_size = dmaengine_cfg->dst_addr_width; |
| } else { |
| sdmac->per_address = dmaengine_cfg->dst_addr; |
| sdmac->watermark_level = dmaengine_cfg->dst_maxburst * |
| dmaengine_cfg->dst_addr_width; |
| sdmac->word_size = dmaengine_cfg->dst_addr_width; |
| } |
| sdmac->direction = dmaengine_cfg->direction; |
| return sdma_config_channel(chan); |
| } |
| |
| static enum dma_status sdma_tx_status(struct dma_chan *chan, |
| dma_cookie_t cookie, |
| struct dma_tx_state *txstate) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct sdma_desc *desc; |
| u32 residue; |
| struct virt_dma_desc *vd; |
| enum dma_status ret; |
| unsigned long flags; |
| |
| ret = dma_cookie_status(chan, cookie, txstate); |
| if (ret == DMA_COMPLETE || !txstate) |
| return ret; |
| |
| spin_lock_irqsave(&sdmac->vc.lock, flags); |
| vd = vchan_find_desc(&sdmac->vc, cookie); |
| if (vd) { |
| desc = to_sdma_desc(&vd->tx); |
| if (sdmac->flags & IMX_DMA_SG_LOOP) |
| residue = (desc->num_bd - desc->buf_ptail) * |
| desc->period_len - desc->chn_real_count; |
| else |
| residue = desc->chn_count - desc->chn_real_count; |
| } else if (sdmac->desc && sdmac->desc->vd.tx.cookie == cookie) { |
| residue = sdmac->desc->chn_count - sdmac->desc->chn_real_count; |
| } else { |
| residue = 0; |
| } |
| spin_unlock_irqrestore(&sdmac->vc.lock, flags); |
| |
| dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie, |
| residue); |
| |
| return sdmac->status; |
| } |
| |
| static void sdma_issue_pending(struct dma_chan *chan) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sdmac->vc.lock, flags); |
| if (vchan_issue_pending(&sdmac->vc) && !sdmac->desc) |
| sdma_start_desc(sdmac); |
| spin_unlock_irqrestore(&sdmac->vc.lock, flags); |
| } |
| |
| #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34 |
| #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38 |
| #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41 |
| #define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42 |
| |
| static void sdma_add_scripts(struct sdma_engine *sdma, |
| const struct sdma_script_start_addrs *addr) |
| { |
| s32 *addr_arr = (u32 *)addr; |
| s32 *saddr_arr = (u32 *)sdma->script_addrs; |
| int i; |
| |
| /* use the default firmware in ROM if missing external firmware */ |
| if (!sdma->script_number) |
| sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; |
| |
| for (i = 0; i < sdma->script_number; i++) |
| if (addr_arr[i] > 0) |
| saddr_arr[i] = addr_arr[i]; |
| } |
| |
| static void sdma_load_firmware(const struct firmware *fw, void *context) |
| { |
| struct sdma_engine *sdma = context; |
| const struct sdma_firmware_header *header; |
| const struct sdma_script_start_addrs *addr; |
| unsigned short *ram_code; |
| |
| if (!fw) { |
| dev_info(sdma->dev, "external firmware not found, using ROM firmware\n"); |
| /* In this case we just use the ROM firmware. */ |
| return; |
| } |
| |
| if (fw->size < sizeof(*header)) |
| goto err_firmware; |
| |
| header = (struct sdma_firmware_header *)fw->data; |
| |
| if (header->magic != SDMA_FIRMWARE_MAGIC) |
| goto err_firmware; |
| if (header->ram_code_start + header->ram_code_size > fw->size) |
| goto err_firmware; |
| switch (header->version_major) { |
| case 1: |
| sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; |
| break; |
| case 2: |
| sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2; |
| break; |
| case 3: |
| sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3; |
| break; |
| case 4: |
| sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4; |
| break; |
| default: |
| dev_err(sdma->dev, "unknown firmware version\n"); |
| goto err_firmware; |
| } |
| |
| addr = (void *)header + header->script_addrs_start; |
| ram_code = (void *)header + header->ram_code_start; |
| |
| clk_enable(sdma->clk_ipg); |
| clk_enable(sdma->clk_ahb); |
| /* download the RAM image for SDMA */ |
| sdma_load_script(sdma, ram_code, |
| header->ram_code_size, |
| addr->ram_code_start_addr); |
| clk_disable(sdma->clk_ipg); |
| clk_disable(sdma->clk_ahb); |
| |
| sdma_add_scripts(sdma, addr); |
| |
| dev_info(sdma->dev, "loaded firmware %d.%d\n", |
| header->version_major, |
| header->version_minor); |
| |
| err_firmware: |
| release_firmware(fw); |
| } |
| |
| #define EVENT_REMAP_CELLS 3 |
| |
| static int sdma_event_remap(struct sdma_engine *sdma) |
| { |
| struct device_node *np = sdma->dev->of_node; |
| struct device_node *gpr_np = of_parse_phandle(np, "gpr", 0); |
| struct property *event_remap; |
| struct regmap *gpr; |
| char propname[] = "fsl,sdma-event-remap"; |
| u32 reg, val, shift, num_map, i; |
| int ret = 0; |
| |
| if (IS_ERR(np) || IS_ERR(gpr_np)) |
| goto out; |
| |
| event_remap = of_find_property(np, propname, NULL); |
| num_map = event_remap ? (event_remap->length / sizeof(u32)) : 0; |
| if (!num_map) { |
| dev_dbg(sdma->dev, "no event needs to be remapped\n"); |
| goto out; |
| } else if (num_map % EVENT_REMAP_CELLS) { |
| dev_err(sdma->dev, "the property %s must modulo %d\n", |
| propname, EVENT_REMAP_CELLS); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| gpr = syscon_node_to_regmap(gpr_np); |
| if (IS_ERR(gpr)) { |
| dev_err(sdma->dev, "failed to get gpr regmap\n"); |
| ret = PTR_ERR(gpr); |
| goto out; |
| } |
| |
| for (i = 0; i < num_map; i += EVENT_REMAP_CELLS) { |
| ret = of_property_read_u32_index(np, propname, i, ®); |
| if (ret) { |
| dev_err(sdma->dev, "failed to read property %s index %d\n", |
| propname, i); |
| goto out; |
| } |
| |
| ret = of_property_read_u32_index(np, propname, i + 1, &shift); |
| if (ret) { |
| dev_err(sdma->dev, "failed to read property %s index %d\n", |
| propname, i + 1); |
| goto out; |
| } |
| |
| ret = of_property_read_u32_index(np, propname, i + 2, &val); |
| if (ret) { |
| dev_err(sdma->dev, "failed to read property %s index %d\n", |
| propname, i + 2); |
| goto out; |
| } |
| |
| regmap_update_bits(gpr, reg, BIT(shift), val << shift); |
| } |
| |
| out: |
| if (!IS_ERR(gpr_np)) |
| of_node_put(gpr_np); |
| |
| return ret; |
| } |
| |
| static int sdma_get_firmware(struct sdma_engine *sdma, |
| const char *fw_name) |
| { |
| int ret; |
| |
| ret = request_firmware_nowait(THIS_MODULE, |
| FW_ACTION_HOTPLUG, fw_name, sdma->dev, |
| GFP_KERNEL, sdma, sdma_load_firmware); |
| |
| return ret; |
| } |
| |
| static int sdma_init(struct sdma_engine *sdma) |
| { |
| int i, ret; |
| dma_addr_t ccb_phys; |
| |
| ret = clk_enable(sdma->clk_ipg); |
| if (ret) |
| return ret; |
| ret = clk_enable(sdma->clk_ahb); |
| if (ret) |
| goto disable_clk_ipg; |
| |
| /* Be sure SDMA has not started yet */ |
| writel_relaxed(0, sdma->regs + SDMA_H_C0PTR); |
| |
| sdma->channel_control = dma_alloc_coherent(NULL, |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control) + |
| sizeof(struct sdma_context_data), |
| &ccb_phys, GFP_KERNEL); |
| |
| if (!sdma->channel_control) { |
| ret = -ENOMEM; |
| goto err_dma_alloc; |
| } |
| |
| sdma->context = (void *)sdma->channel_control + |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| sdma->context_phys = ccb_phys + |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control); |
| |
| /* Zero-out the CCB structures array just allocated */ |
| memset(sdma->channel_control, 0, |
| MAX_DMA_CHANNELS * sizeof (struct sdma_channel_control)); |
| |
| /* disable all channels */ |
| for (i = 0; i < sdma->drvdata->num_events; i++) |
| writel_relaxed(0, sdma->regs + chnenbl_ofs(sdma, i)); |
| |
| /* All channels have priority 0 */ |
| for (i = 0; i < MAX_DMA_CHANNELS; i++) |
| writel_relaxed(0, sdma->regs + SDMA_CHNPRI_0 + i * 4); |
| |
| ret = sdma_request_channel0(sdma); |
| if (ret) |
| goto err_dma_alloc; |
| |
| sdma_config_ownership(&sdma->channel[0], false, true, false); |
| |
| /* Set Command Channel (Channel Zero) */ |
| writel_relaxed(0x4050, sdma->regs + SDMA_CHN0ADDR); |
| |
| /* Set bits of CONFIG register but with static context switching */ |
| /* FIXME: Check whether to set ACR bit depending on clock ratios */ |
| writel_relaxed(0, sdma->regs + SDMA_H_CONFIG); |
| |
| writel_relaxed(ccb_phys, sdma->regs + SDMA_H_C0PTR); |
| |
| /* Initializes channel's priorities */ |
| sdma_set_channel_priority(&sdma->channel[0], 7); |
| |
| clk_disable(sdma->clk_ipg); |
| clk_disable(sdma->clk_ahb); |
| |
| return 0; |
| |
| err_dma_alloc: |
| clk_disable(sdma->clk_ahb); |
| disable_clk_ipg: |
| clk_disable(sdma->clk_ipg); |
| dev_err(sdma->dev, "initialisation failed with %d\n", ret); |
| return ret; |
| } |
| |
| static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param) |
| { |
| struct sdma_channel *sdmac = to_sdma_chan(chan); |
| struct imx_dma_data *data = fn_param; |
| |
| if (!imx_dma_is_general_purpose(chan)) |
| return false; |
| |
| sdmac->data = *data; |
| chan->private = &sdmac->data; |
| |
| return true; |
| } |
| |
| static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec, |
| struct of_dma *ofdma) |
| { |
| struct sdma_engine *sdma = ofdma->of_dma_data; |
| dma_cap_mask_t mask = sdma->dma_device.cap_mask; |
| struct imx_dma_data data; |
| |
| if (dma_spec->args_count != 3) |
| return NULL; |
| |
| data.dma_request = dma_spec->args[0]; |
| data.peripheral_type = dma_spec->args[1]; |
| data.priority = dma_spec->args[2]; |
| /* |
| * init dma_request2 to zero, which is not used by the dts. |
| * For P2P, dma_request2 is init from dma_request_channel(), |
| * chan->private will point to the imx_dma_data, and in |
| * device_alloc_chan_resources(), imx_dma_data.dma_request2 will |
| * be set to sdmac->event_id1. |
| */ |
| data.dma_request2 = 0; |
| |
| return dma_request_channel(mask, sdma_filter_fn, &data); |
| } |
| |
| static int sdma_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(sdma_dt_ids, &pdev->dev); |
| struct device_node *np = pdev->dev.of_node; |
| struct device_node *spba_bus; |
| const char *fw_name; |
| int ret; |
| int irq; |
| struct resource *iores; |
| struct resource spba_res; |
| struct sdma_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| int i; |
| struct sdma_engine *sdma; |
| s32 *saddr_arr; |
| const struct sdma_driver_data *drvdata = NULL; |
| |
| if (of_id) |
| drvdata = of_id->data; |
| else if (pdev->id_entry) |
| drvdata = (void *)pdev->id_entry->driver_data; |
| |
| if (!drvdata) { |
| dev_err(&pdev->dev, "unable to find driver data\n"); |
| return -EINVAL; |
| } |
| |
| ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (ret) |
| return ret; |
| |
| sdma = devm_kzalloc(&pdev->dev, sizeof(*sdma), GFP_KERNEL); |
| if (!sdma) |
| return -ENOMEM; |
| |
| spin_lock_init(&sdma->channel_0_lock); |
| |
| sdma->dev = &pdev->dev; |
| sdma->drvdata = drvdata; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| sdma->regs = devm_ioremap_resource(&pdev->dev, iores); |
| if (IS_ERR(sdma->regs)) |
| return PTR_ERR(sdma->regs); |
| |
| sdma->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(sdma->clk_ipg)) |
| return PTR_ERR(sdma->clk_ipg); |
| |
| sdma->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); |
| if (IS_ERR(sdma->clk_ahb)) |
| return PTR_ERR(sdma->clk_ahb); |
| |
| ret = clk_prepare(sdma->clk_ipg); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare(sdma->clk_ahb); |
| if (ret) |
| goto err_clk; |
| |
| ret = devm_request_irq(&pdev->dev, irq, sdma_int_handler, 0, "sdma", |
| sdma); |
| if (ret) |
| goto err_irq; |
| |
| sdma->irq = irq; |
| |
| sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL); |
| if (!sdma->script_addrs) { |
| ret = -ENOMEM; |
| goto err_irq; |
| } |
| |
| /* initially no scripts available */ |
| saddr_arr = (s32 *)sdma->script_addrs; |
| for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) |
| saddr_arr[i] = -EINVAL; |
| |
| dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask); |
| dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask); |
| dma_cap_set(DMA_MEMCPY, sdma->dma_device.cap_mask); |
| |
| INIT_LIST_HEAD(&sdma->dma_device.channels); |
| /* Initialize channel parameters */ |
| for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
| struct sdma_channel *sdmac = &sdma->channel[i]; |
| |
| sdmac->sdma = sdma; |
| |
| sdmac->channel = i; |
| sdmac->vc.desc_free = sdma_desc_free; |
| /* |
| * Add the channel to the DMAC list. Do not add channel 0 though |
| * because we need it internally in the SDMA driver. This also means |
| * that channel 0 in dmaengine counting matches sdma channel 1. |
| */ |
| if (i) |
| vchan_init(&sdmac->vc, &sdma->dma_device); |
| } |
| |
| ret = sdma_init(sdma); |
| if (ret) |
| goto err_init; |
| |
| ret = sdma_event_remap(sdma); |
| if (ret) |
| goto err_init; |
| |
| if (sdma->drvdata->script_addrs) |
| sdma_add_scripts(sdma, sdma->drvdata->script_addrs); |
| if (pdata && pdata->script_addrs) |
| sdma_add_scripts(sdma, pdata->script_addrs); |
| |
| if (pdata) { |
| ret = sdma_get_firmware(sdma, pdata->fw_name); |
| if (ret) |
| dev_warn(&pdev->dev, "failed to get firmware from platform data\n"); |
| } else { |
| /* |
| * Because that device tree does not encode ROM script address, |
| * the RAM script in firmware is mandatory for device tree |
| * probe, otherwise it fails. |
| */ |
| ret = of_property_read_string(np, "fsl,sdma-ram-script-name", |
| &fw_name); |
| if (ret) |
| dev_warn(&pdev->dev, "failed to get firmware name\n"); |
| else { |
| ret = sdma_get_firmware(sdma, fw_name); |
| if (ret) |
| dev_warn(&pdev->dev, "failed to get firmware from device tree\n"); |
| } |
| } |
| |
| sdma->dma_device.dev = &pdev->dev; |
| |
| sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources; |
| sdma->dma_device.device_free_chan_resources = sdma_free_chan_resources; |
| sdma->dma_device.device_tx_status = sdma_tx_status; |
| sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg; |
| sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic; |
| sdma->dma_device.device_config = sdma_config; |
| sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay; |
| sdma->dma_device.src_addr_widths = SDMA_DMA_BUSWIDTHS; |
| sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS; |
| sdma->dma_device.directions = SDMA_DMA_DIRECTIONS; |
| sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; |
| sdma->dma_device.device_prep_dma_memcpy = sdma_prep_memcpy; |
| sdma->dma_device.device_issue_pending = sdma_issue_pending; |
| sdma->dma_device.dev->dma_parms = &sdma->dma_parms; |
| dma_set_max_seg_size(sdma->dma_device.dev, SDMA_BD_MAX_CNT); |
| |
| platform_set_drvdata(pdev, sdma); |
| |
| ret = dma_async_device_register(&sdma->dma_device); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to register\n"); |
| goto err_init; |
| } |
| |
| if (np) { |
| ret = of_dma_controller_register(np, sdma_xlate, sdma); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register controller\n"); |
| goto err_register; |
| } |
| |
| spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus"); |
| ret = of_address_to_resource(spba_bus, 0, &spba_res); |
| if (!ret) { |
| sdma->spba_start_addr = spba_res.start; |
| sdma->spba_end_addr = spba_res.end; |
| } |
| of_node_put(spba_bus); |
| } |
| |
| return 0; |
| |
| err_register: |
| dma_async_device_unregister(&sdma->dma_device); |
| err_init: |
| kfree(sdma->script_addrs); |
| err_irq: |
| clk_unprepare(sdma->clk_ahb); |
| err_clk: |
| clk_unprepare(sdma->clk_ipg); |
| return ret; |
| } |
| |
| static int sdma_remove(struct platform_device *pdev) |
| { |
| struct sdma_engine *sdma = platform_get_drvdata(pdev); |
| int i; |
| |
| devm_free_irq(&pdev->dev, sdma->irq, sdma); |
| dma_async_device_unregister(&sdma->dma_device); |
| kfree(sdma->script_addrs); |
| clk_unprepare(sdma->clk_ahb); |
| clk_unprepare(sdma->clk_ipg); |
| /* Kill the tasklet */ |
| for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
| struct sdma_channel *sdmac = &sdma->channel[i]; |
| |
| tasklet_kill(&sdmac->vc.task); |
| sdma_free_chan_resources(&sdmac->vc.chan); |
| } |
| |
| platform_set_drvdata(pdev, NULL); |
| return 0; |
| } |
| |
| static struct platform_driver sdma_driver = { |
| .driver = { |
| .name = "imx-sdma", |
| .of_match_table = sdma_dt_ids, |
| }, |
| .id_table = sdma_devtypes, |
| .remove = sdma_remove, |
| .probe = sdma_probe, |
| }; |
| |
| module_platform_driver(sdma_driver); |
| |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>"); |
| MODULE_DESCRIPTION("i.MX SDMA driver"); |
| #if IS_ENABLED(CONFIG_SOC_IMX6Q) |
| MODULE_FIRMWARE("imx/sdma/sdma-imx6q.bin"); |
| #endif |
| #if IS_ENABLED(CONFIG_SOC_IMX7D) |
| MODULE_FIRMWARE("imx/sdma/sdma-imx7d.bin"); |
| #endif |
| MODULE_LICENSE("GPL"); |