| /* | |
| * drivers/power/process.c - Functions for starting/stopping processes on | |
| * suspend transitions. | |
| * | |
| * Originally from swsusp. | |
| */ | |
| #undef DEBUG | |
| #include <linux/interrupt.h> | |
| #include <linux/suspend.h> | |
| #include <linux/module.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/freezer.h> | |
| /* | |
| * Timeout for stopping processes | |
| */ | |
| #define TIMEOUT (20 * HZ) | |
| static inline int freezeable(struct task_struct * p) | |
| { | |
| if ((p == current) || | |
| (p->flags & PF_NOFREEZE) || | |
| (p->exit_state != 0)) | |
| return 0; | |
| return 1; | |
| } | |
| /* | |
| * freezing is complete, mark current process as frozen | |
| */ | |
| static inline void frozen_process(void) | |
| { | |
| if (!unlikely(current->flags & PF_NOFREEZE)) { | |
| current->flags |= PF_FROZEN; | |
| wmb(); | |
| } | |
| clear_freeze_flag(current); | |
| } | |
| /* Refrigerator is place where frozen processes are stored :-). */ | |
| void refrigerator(void) | |
| { | |
| /* Hmm, should we be allowed to suspend when there are realtime | |
| processes around? */ | |
| long save; | |
| task_lock(current); | |
| if (freezing(current)) { | |
| frozen_process(); | |
| task_unlock(current); | |
| } else { | |
| task_unlock(current); | |
| return; | |
| } | |
| save = current->state; | |
| pr_debug("%s entered refrigerator\n", current->comm); | |
| spin_lock_irq(¤t->sighand->siglock); | |
| recalc_sigpending(); /* We sent fake signal, clean it up */ | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| for (;;) { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| if (!frozen(current)) | |
| break; | |
| schedule(); | |
| } | |
| pr_debug("%s left refrigerator\n", current->comm); | |
| __set_current_state(save); | |
| } | |
| static void fake_signal_wake_up(struct task_struct *p) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&p->sighand->siglock, flags); | |
| signal_wake_up(p, 0); | |
| spin_unlock_irqrestore(&p->sighand->siglock, flags); | |
| } | |
| static inline bool should_send_signal(struct task_struct *p) | |
| { | |
| return !(p->flags & PF_FREEZER_NOSIG); | |
| } | |
| /** | |
| * freeze_task - send a freeze request to given task | |
| * @p: task to send the request to | |
| * @sig_only: if set, the request will only be sent if the task has the | |
| * PF_FREEZER_NOSIG flag unset | |
| * Return value: 'false', if @sig_only is set and the task has | |
| * PF_FREEZER_NOSIG set or the task is frozen, 'true', otherwise | |
| * | |
| * The freeze request is sent by setting the tasks's TIF_FREEZE flag and | |
| * either sending a fake signal to it or waking it up, depending on whether | |
| * or not it has PF_FREEZER_NOSIG set. If @sig_only is set and the task | |
| * has PF_FREEZER_NOSIG set (ie. it is a typical kernel thread), its | |
| * TIF_FREEZE flag will not be set. | |
| */ | |
| static bool freeze_task(struct task_struct *p, bool sig_only) | |
| { | |
| /* | |
| * We first check if the task is freezing and next if it has already | |
| * been frozen to avoid the race with frozen_process() which first marks | |
| * the task as frozen and next clears its TIF_FREEZE. | |
| */ | |
| if (!freezing(p)) { | |
| rmb(); | |
| if (frozen(p)) | |
| return false; | |
| if (!sig_only || should_send_signal(p)) | |
| set_freeze_flag(p); | |
| else | |
| return false; | |
| } | |
| if (should_send_signal(p)) { | |
| if (!signal_pending(p)) | |
| fake_signal_wake_up(p); | |
| } else if (sig_only) { | |
| return false; | |
| } else { | |
| wake_up_state(p, TASK_INTERRUPTIBLE); | |
| } | |
| return true; | |
| } | |
| static void cancel_freezing(struct task_struct *p) | |
| { | |
| unsigned long flags; | |
| if (freezing(p)) { | |
| pr_debug(" clean up: %s\n", p->comm); | |
| clear_freeze_flag(p); | |
| spin_lock_irqsave(&p->sighand->siglock, flags); | |
| recalc_sigpending_and_wake(p); | |
| spin_unlock_irqrestore(&p->sighand->siglock, flags); | |
| } | |
| } | |
| static int try_to_freeze_tasks(bool sig_only) | |
| { | |
| struct task_struct *g, *p; | |
| unsigned long end_time; | |
| unsigned int todo; | |
| struct timeval start, end; | |
| s64 elapsed_csecs64; | |
| unsigned int elapsed_csecs; | |
| do_gettimeofday(&start); | |
| end_time = jiffies + TIMEOUT; | |
| do { | |
| todo = 0; | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| if (frozen(p) || !freezeable(p)) | |
| continue; | |
| if (!freeze_task(p, sig_only)) | |
| continue; | |
| /* | |
| * Now that we've done set_freeze_flag, don't | |
| * perturb a task in TASK_STOPPED or TASK_TRACED. | |
| * It is "frozen enough". If the task does wake | |
| * up, it will immediately call try_to_freeze. | |
| */ | |
| if (!task_is_stopped_or_traced(p) && | |
| !freezer_should_skip(p)) | |
| todo++; | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| yield(); /* Yield is okay here */ | |
| if (time_after(jiffies, end_time)) | |
| break; | |
| } while (todo); | |
| do_gettimeofday(&end); | |
| elapsed_csecs64 = timeval_to_ns(&end) - timeval_to_ns(&start); | |
| do_div(elapsed_csecs64, NSEC_PER_SEC / 100); | |
| elapsed_csecs = elapsed_csecs64; | |
| if (todo) { | |
| /* This does not unfreeze processes that are already frozen | |
| * (we have slightly ugly calling convention in that respect, | |
| * and caller must call thaw_processes() if something fails), | |
| * but it cleans up leftover PF_FREEZE requests. | |
| */ | |
| printk("\n"); | |
| printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds " | |
| "(%d tasks refusing to freeze):\n", | |
| elapsed_csecs / 100, elapsed_csecs % 100, todo); | |
| show_state(); | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| task_lock(p); | |
| if (freezing(p) && !freezer_should_skip(p)) | |
| printk(KERN_ERR " %s\n", p->comm); | |
| cancel_freezing(p); | |
| task_unlock(p); | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| } else { | |
| printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100, | |
| elapsed_csecs % 100); | |
| } | |
| return todo ? -EBUSY : 0; | |
| } | |
| /** | |
| * freeze_processes - tell processes to enter the refrigerator | |
| */ | |
| int freeze_processes(void) | |
| { | |
| int error; | |
| printk("Freezing user space processes ... "); | |
| error = try_to_freeze_tasks(true); | |
| if (error) | |
| goto Exit; | |
| printk("done.\n"); | |
| printk("Freezing remaining freezable tasks ... "); | |
| error = try_to_freeze_tasks(false); | |
| if (error) | |
| goto Exit; | |
| printk("done."); | |
| Exit: | |
| BUG_ON(in_atomic()); | |
| printk("\n"); | |
| return error; | |
| } | |
| static void thaw_tasks(bool nosig_only) | |
| { | |
| struct task_struct *g, *p; | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| if (!freezeable(p)) | |
| continue; | |
| if (nosig_only && should_send_signal(p)) | |
| continue; | |
| thaw_process(p); | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| } | |
| void thaw_processes(void) | |
| { | |
| printk("Restarting tasks ... "); | |
| thaw_tasks(true); | |
| thaw_tasks(false); | |
| schedule(); | |
| printk("done.\n"); | |
| } | |
| EXPORT_SYMBOL(refrigerator); |