drivers/acpi/dispatcher/dsinit.c

/******************************************************************************
 *
 * Module Name: dsinit - Object initialization namespace walk
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2006, R. Byron Moore
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include <acpi/acdispat.h>
#include <acpi/acnamesp.h>

#define _COMPONENT          ACPI_DISPATCHER
ACPI_MODULE_NAME("dsinit")

/* Local prototypes */
static acpi_status
acpi_ds_init_one_object(acpi_handle obj_handle,
			u32 level, void *context, void **return_value);

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_init_one_object
 *
 * PARAMETERS:  obj_handle      - Node for the object
 *              Level           - Current nesting level
 *              Context         - Points to a init info struct
 *              return_value    - Not used
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Callback from acpi_walk_namespace. Invoked for every object
 *              within the namespace.
 *
 *              Currently, the only objects that require initialization are:
 *              1) Methods
 *              2) Operation Regions
 *
 ******************************************************************************/

static acpi_status
acpi_ds_init_one_object(acpi_handle obj_handle,
			u32 level, void *context, void **return_value)
{
	struct acpi_init_walk_info *info =
	    (struct acpi_init_walk_info *)context;
	struct acpi_namespace_node *node =
	    (struct acpi_namespace_node *)obj_handle;
	acpi_object_type type;
	acpi_status status;

	ACPI_FUNCTION_ENTRY();

	/*
	 * We are only interested in NS nodes owned by the table that
	 * was just loaded
	 */
	if (node->owner_id != info->table_desc->owner_id) {
		return (AE_OK);
	}

	info->object_count++;

	/* And even then, we are only interested in a few object types */

	type = acpi_ns_get_type(obj_handle);

	switch (type) {
	case ACPI_TYPE_REGION:

		status = acpi_ds_initialize_region(obj_handle);
		if (ACPI_FAILURE(status)) {
			ACPI_REPORT_ERROR(("Region %p [%4.4s] - Init failure, %s\n", obj_handle, acpi_ut_get_node_name(obj_handle), acpi_format_exception(status)));
		}

		info->op_region_count++;
		break;

	case ACPI_TYPE_METHOD:

		/*
		 * Set the execution data width (32 or 64) based upon the
		 * revision number of the parent ACPI table.
		 * TBD: This is really for possible future support of integer width
		 * on a per-table basis. Currently, we just use a global for the width.
		 */
		if (info->table_desc->pointer->revision == 1) {
			node->flags |= ANOBJ_DATA_WIDTH_32;
		}
#ifdef ACPI_INIT_PARSE_METHODS
		/*
		 * Note 11/2005: Removed this code to parse all methods during table
		 * load because it causes problems if there are any errors during the
		 * parse. Also, it seems like overkill and we probably don't want to
		 * abort a table load because of an issue with a single method.
		 */

		/*
		 * Print a dot for each method unless we are going to print
		 * the entire pathname
		 */
		if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
			ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "."));
		}

		/*
		 * Always parse methods to detect errors, we will delete
		 * the parse tree below
		 */
		status = acpi_ds_parse_method(obj_handle);
		if (ACPI_FAILURE(status)) {
			ACPI_REPORT_ERROR(("\n+Method %p [%4.4s] - parse failure, %s\n", obj_handle, acpi_ut_get_node_name(obj_handle), acpi_format_exception(status)));

			/* This parse failed, but we will continue parsing more methods */
		}
#endif
		info->method_count++;
		break;

	case ACPI_TYPE_DEVICE:

		info->device_count++;
		break;

	default:
		break;
	}

	/*
	 * We ignore errors from above, and always return OK, since
	 * we don't want to abort the walk on a single error.
	 */
	return (AE_OK);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_initialize_objects
 *
 * PARAMETERS:  table_desc      - Descriptor for parent ACPI table
 *              start_node      - Root of subtree to be initialized.
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Walk the namespace starting at "start_node" and perform any
 *              necessary initialization on the objects found therein
 *
 ******************************************************************************/

acpi_status
acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
			   struct acpi_namespace_node * start_node)
{
	acpi_status status;
	struct acpi_init_walk_info info;

	ACPI_FUNCTION_TRACE("ds_initialize_objects");

	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
			  "**** Starting initialization of namespace objects ****\n"));
	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "Parsing all Control Methods:"));

	info.method_count = 0;
	info.op_region_count = 0;
	info.object_count = 0;
	info.device_count = 0;
	info.table_desc = table_desc;

	/* Walk entire namespace from the supplied root */

	status = acpi_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
				     acpi_ds_init_one_object, &info, NULL);
	if (ACPI_FAILURE(status)) {
		ACPI_REPORT_ERROR(("walk_namespace failed, %s\n",
				   acpi_format_exception(status)));
	}

	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
			      "\nTable [%4.4s](id %4.4X) - %hd Objects with %hd Devices %hd Methods %hd Regions\n",
			      table_desc->pointer->signature,
			      table_desc->owner_id, info.object_count,
			      info.device_count, info.method_count,
			      info.op_region_count));

	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
			  "%hd Methods, %hd Regions\n", info.method_count,
			  info.op_region_count));

	return_ACPI_STATUS(AE_OK);
}